| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-19-adbd023e19cc@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull block updates from Jens Axboe:
"Pretty quiet round this time around. This contains:
- NVMe updates via Keith:
- nvme fabrics spec updates (Guixin, Max)
- nvme target udpates (Guixin, Evan)
- nvme attribute refactoring (Daniel)
- nvme-fc numa fix (Keith)
- MD updates via Song:
- Fix/Cleanup RCU usage from conf->disks[i].rdev (Yu Kuai)
- Fix raid5 hang issue (Junxiao Bi)
- Add Yu Kuai as Reviewer of the md subsystem
- Remove deprecated flavors (Song Liu)
- raid1 read error check support (Li Nan)
- Better handle events off-by-1 case (Alex Lyakas)
- Efficiency improvements for passthrough (Kundan)
- Support for mapping integrity data directly (Keith)
- Zoned write fix (Damien)
- rnbd fixes (Kees, Santosh, Supriti)
- Default to a sane discard size granularity (Christoph)
- Make the default max transfer size naming less confusing
(Christoph)
- Remove support for deprecated host aware zoned model (Christoph)
- Misc fixes (me, Li, Matthew, Min, Ming, Randy, liyouhong, Daniel,
Bart, Christoph)"
* tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux: (78 commits)
block: Treat sequential write preferred zone type as invalid
block: remove disk_clear_zoned
sd: remove the !ZBC && blk_queue_is_zoned case in sd_read_block_characteristics
drivers/block/xen-blkback/common.h: Fix spelling typo in comment
blk-cgroup: fix rcu lockdep warning in blkg_lookup()
blk-cgroup: don't use removal safe list iterators
block: floor the discard granularity to the physical block size
mtd_blkdevs: use the default discard granularity
bcache: use the default discard granularity
zram: use the default discard granularity
null_blk: use the default discard granularity
nbd: use the default discard granularity
ubd: use the default discard granularity
block: default the discard granularity to sector size
bcache: discard_granularity should not be smaller than a sector
block: remove two comments in bio_split_discard
block: rename and document BLK_DEF_MAX_SECTORS
loop: don't abuse BLK_DEF_MAX_SECTORS
aoe: don't abuse BLK_DEF_MAX_SECTORS
null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"There are no exciting changes for users, it's been mostly API
conversions and some fixes or refactoring.
The mount API conversion is a base for future improvements that would
come with VFS. Metadata processing has been converted to folios, not
yet enabling the large folios but it's one patch away once everything
gets tested enough.
Core changes:
- convert extent buffers to folios:
- direct API conversion where possible
- performance can drop by a few percent on metadata heavy
workloads, the folio sizes are not constant and the calculations
add up in the item helpers
- both regular and subpage modes
- data cannot be converted yet, we need to port that to iomap and
there are some other generic changes required
- convert mount to the new API, should not be user visible:
- options deprecated long time ago have been removed: inode_cache,
recovery
- the new logic that splits mount to two phases slightly changes
timing of device scanning for multi-device filesystems
- LSM options will now work (like for selinux)
- convert delayed nodes radix tree to xarray, preserving the
preload-like logic that still allows to allocate with GFP_NOFS
- more validation of sysfs value of scrub_speed_max
- refactor chunk map structure, reduce size and improve performance
- extent map refactoring, smaller data structures, improved
performance
- reduce size of struct extent_io_tree, embedded in several
structures
- temporary pages used for compression are cached and attached to a
shrinker, this may slightly improve performance
- in zoned mode, remove redirty extent buffer tracking, zeros are
written in case an out-of-order is detected and proper data are
written to the actual write pointer
- cleanups, refactoring, error message improvements, updated tests
- verify and update branch name or tag
- remove unwanted text"
* tag 'for-6.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (89 commits)
btrfs: pass btrfs_io_geometry into btrfs_max_io_len
btrfs: pass struct btrfs_io_geometry to set_io_stripe
btrfs: open code set_io_stripe for RAID56
btrfs: change block mapping to switch/case in btrfs_map_block
btrfs: factor out block mapping for single profiles
btrfs: factor out block mapping for RAID5/6
btrfs: reduce scope of data_stripes in btrfs_map_block
btrfs: factor out block mapping for RAID10
btrfs: factor out block mapping for DUP profiles
btrfs: factor out RAID1 block mapping
btrfs: factor out block-mapping for RAID0
btrfs: re-introduce struct btrfs_io_geometry
btrfs: factor out helper for single device IO check
btrfs: migrate btrfs_repair_io_failure() to folio interfaces
btrfs: migrate eb_bitmap_offset() to folio interfaces
btrfs: migrate various end io functions to folios
btrfs: migrate subpage code to folio interfaces
btrfs: migrate get_eb_page_index() and get_eb_offset_in_page() to folios
btrfs: don't double put our subpage reference in alloc_extent_buffer
btrfs: cleanup metadata page pointer usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
Pull vfs rw updates from Christian Brauner:
"This contains updates from Amir for read-write backing file helpers
for stacking filesystems such as overlayfs:
- Fanotify is currently in the process of introducing pre content
events. Roughly, a new permission event will be added indicating
that it is safe to write to the file being accessed. These events
are used by hierarchical storage managers to e.g., fill the content
of files on first access.
During that work we noticed that our current permission checking is
inconsistent in rw_verify_area() and remap_verify_area().
Especially in the splice code permission checking is done multiple
times. For example, one time for the whole range and then again for
partial ranges inside the iterator.
In addition, we mostly do permission checking before we call
file_start_write() except for a few places where we call it after.
For pre-content events we need such permission checking to be done
before file_start_write(). So this is a nice reason to clean this
all up.
After this series, all permission checking is done before
file_start_write().
As part of this cleanup we also massaged the splice code a bit. We
got rid of a few helpers because we are alredy drowning in special
read-write helpers. We also cleaned up the return types for splice
helpers.
- Introduce generic read-write helpers for backing files. This lifts
some overlayfs code to common code so it can be used by the FUSE
passthrough work coming in over the next cycles. Make Amir and
Miklos the maintainers for this new subsystem of the vfs"
* tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: fix __sb_write_started() kerneldoc formatting
fs: factor out backing_file_mmap() helper
fs: factor out backing_file_splice_{read,write}() helpers
fs: factor out backing_file_{read,write}_iter() helpers
fs: prepare for stackable filesystems backing file helpers
fsnotify: optionally pass access range in file permission hooks
fsnotify: assert that file_start_write() is not held in permission hooks
fsnotify: split fsnotify_perm() into two hooks
fs: use splice_copy_file_range() inline helper
splice: return type ssize_t from all helpers
fs: use do_splice_direct() for nfsd/ksmbd server-side-copy
fs: move file_start_write() into direct_splice_actor()
fs: fork splice_file_range() from do_splice_direct()
fs: create {sb,file}_write_not_started() helpers
fs: create file_write_started() helper
fs: create __sb_write_started() helper
fs: move kiocb_start_write() into vfs_iocb_iter_write()
fs: move permission hook out of do_iter_read()
fs: move permission hook out of do_iter_write()
fs: move file_start_write() into vfs_iter_write()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs super updates from Christian Brauner:
"This contains the super work for this cycle including the long-awaited
series by Jan to make it possible to prevent writing to mounted block
devices:
- Writing to mounted devices is dangerous and can lead to filesystem
corruption as well as crashes. Furthermore syzbot comes with more
and more involved examples how to corrupt block device under a
mounted filesystem leading to kernel crashes and reports we can do
nothing about. Add tracking of writers to each block device and a
kernel cmdline argument which controls whether other writeable
opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are
allowed.
Note that this effectively only prevents modification of the
particular block device's page cache by other writers. The actual
device content can still be modified by other means - e.g. by
issuing direct scsi commands, by doing writes through devices lower
in the storage stack (e.g. in case loop devices, DM, or MD are
involved) etc. But blocking direct modifications of the block
device page cache is enough to give filesystems a chance to perform
data validation when loading data from the underlying storage and
thus prevent kernel crashes.
Syzbot can use this cmdline argument option to avoid uninteresting
crashes. Also users whose userspace setup does not need writing to
mounted block devices can set this option for hardening. We expect
that this will be interesting to quite a few workloads.
Btrfs is currently opted out of this because they still haven't
merged patches we require for this to work from three kernel
releases ago.
- Reimplement block device freezing and thawing as holder operations
on the block device.
This allows us to extend block device freezing to all devices
associated with a superblock and not just the main device. It also
allows us to remove get_active_super() and thus another function
that scans the global list of superblocks.
Freezing via additional block devices only works if the filesystem
chooses to use @fs_holder_ops for these additional devices as well.
That currently only includes ext4 and xfs.
Earlier releases switched get_tree_bdev() and mount_bdev() to use
@fs_holder_ops. The remaining nilfs2 open-coded version of
mount_bdev() has been converted to rely on @fs_holder_ops as well.
So block device freezing for the main block device will continue to
work as before.
There should be no regressions in functionality. The only special
case is btrfs where block device freezing for the main block device
never worked because sb->s_bdev isn't set. Block device freezing
for btrfs can be fixed once they can switch to @fs_holder_ops but
that can happen whenever they're ready"
* tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
block: Fix a memory leak in bdev_open_by_dev()
super: don't bother with WARN_ON_ONCE()
super: massage wait event mechanism
ext4: Block writes to journal device
xfs: Block writes to log device
fs: Block writes to mounted block devices
btrfs: Do not restrict writes to btrfs devices
block: Add config option to not allow writing to mounted devices
block: Remove blkdev_get_by_*() functions
bcachefs: Convert to bdev_open_by_path()
fs: handle freezing from multiple devices
fs: remove dead check
nilfs2: simplify device handling
fs: streamline thaw_super_locked
ext4: simplify device handling
xfs: simplify device handling
fs: simplify setup_bdev_super() calls
blkdev: comment fs_holder_ops
porting: document block device freeze and thaw changes
fs: remove unused helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
|
|
When zones were first added the SCSI and ATA specs, two different
models were supported (in addition to the drive managed one that
is invisible to the host):
- host managed where non-conventional zones there is strict requirement
to write at the write pointer, or else an error is returned
- host aware where a write point is maintained if writes always happen
at it, otherwise it is left in an under-defined state and the
sequential write preferred zones behave like conventional zones
(probably very badly performing ones, though)
Not surprisingly this lukewarm model didn't prove to be very useful and
was finally removed from the ZBC and SBC specs (NVMe never implemented
it). Due to to the easily disappearing write pointer host software
could never rely on the write pointer to actually be useful for say
recovery.
Fortunately only a few HDD prototypes shipped using this model which
never made it to mass production. Drop the support before it is too
late. Note that any such host aware prototype HDD can still be used
with Linux as we'll now treat it as a conventional HDD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix that verifies that the snapshot source is a root, same
check is also done in user space but should be done by the ioctl as
well"
* tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: do not allow non subvolume root targets for snapshot
|
|
Our btrfs subvolume snapshot <source> <destination> utility enforces
that <source> is the root of the subvolume, however this isn't enforced
in the kernel. Update the kernel to also enforce this limitation to
avoid problems with other users of this ioctl that don't have the
appropriate checks in place.
Reported-by: Martin Michaelis <code@mgjm.de>
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing three individual members of 'struct btrfs_io_geometry'
into btrfs_max_io_len(), pass a pointer to btrfs_io_geometry.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing three members of 'struct btrfs_io_geometry' into
set_io_stripe() pass a pointer to the whole structure and then get the needed
members out of btrfs_io_geometry.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Open code set_io_stripe() for RAID56, as it
a) uses a different method to calculate the stripe_index
b) doesn't need to go through raid-stripe-tree mapping code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that all the per-profile if/else statement blocks have been
converted to calls to helper the conversion to switch/case is
straightforward.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have a container for the I/O geometry that has all the needed
information for the block mappings of SINGLE profiles, factor out a helper
calculating this information.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have a container for the I/O geometry that has all the needed
information for the block mappings of RAID5 and RAID6, factor out a helper
calculating this information.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Reduce the scope of 'data_stripes' in btrfs_map_block(). While the
change alone may not make too much sense, it helps us factoring out a
helper function for the block mapping of RAID56 I/O.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have a container for the I/O geometry that has all the needed
information for the block mappings of RAID10, factor out a helper calculating
this information.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have a container for the I/O geometry that has all the needed
information for the block mappings of DUP, factor out a helper calculating
this information.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have a container for the I/O geometry that has all the needed
information for the block mappings of RAID1, factor out a helper calculating
this information.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have a container for the I/O geometry that has all the needed
information for the block mappings of RAID0, factor out a helper calculating
this information.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Re-introduce struct btrfs_io_geometry, holding the necessary bits and
pieces needed in btrfs_map_block() to decide the I/O geometry of a specific
block mapping.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The check in btrfs_map_block() deciding if a particular I/O is targeting a
single device is getting more and more convoluted.
Factor out the check conditions into a helper function, with no functional
change otherwise.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Test case btrfs/124 failed if larger metadata folio is enabled, the
dying message looks like this:
BTRFS error (device dm-2): bad tree block start, mirror 2 want 31686656 have 0
BTRFS info (device dm-2): read error corrected: ino 0 off 31686656 (dev /dev/mapper/test-scratch2 sector 20928)
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 6 PID: 350881 Comm: btrfs Tainted: G OE 6.7.0-rc3-custom+ #128
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022
RIP: 0010:btrfs_read_extent_buffer+0x106/0x180 [btrfs]
PKRU: 55555554
Call Trace:
<TASK>
read_tree_block+0x33/0xb0 [btrfs]
read_block_for_search+0x23e/0x340 [btrfs]
btrfs_search_slot+0x2f9/0xe60 [btrfs]
btrfs_lookup_csum+0x75/0x160 [btrfs]
btrfs_lookup_bio_sums+0x21a/0x560 [btrfs]
btrfs_submit_chunk+0x152/0x680 [btrfs]
btrfs_submit_bio+0x1c/0x50 [btrfs]
submit_one_bio+0x40/0x80 [btrfs]
submit_extent_page+0x158/0x390 [btrfs]
btrfs_do_readpage+0x330/0x740 [btrfs]
extent_readahead+0x38d/0x6c0 [btrfs]
read_pages+0x94/0x2c0
page_cache_ra_unbounded+0x12d/0x190
relocate_file_extent_cluster+0x7c1/0x9d0 [btrfs]
relocate_block_group+0x2d3/0x560 [btrfs]
btrfs_relocate_block_group+0x2c7/0x4b0 [btrfs]
btrfs_relocate_chunk+0x4c/0x1a0 [btrfs]
btrfs_balance+0x925/0x13c0 [btrfs]
btrfs_ioctl+0x19f1/0x25d0 [btrfs]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x3f/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
[CAUSE]
The dying line is at btrfs_repair_io_failure() call inside
btrfs_repair_eb_io_failure().
The function is still relying on the extent buffer using page sized
folios.
When the extent buffer is using larger folio, we go into the 2nd slot of
folios[], and triggered the NULL pointer dereference.
[FIX]
Migrate btrfs_repair_io_failure() to folio interfaces.
So that when we hit a larger folio, we just submit the whole folio in
one go.
This also affects data repair path through btrfs_end_repair_bio(),
thankfully data is still fully page based, we can just add an
ASSERT(), and use page_folio() to convert the page to folio.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Test case btrfs/002 would fail if larger folios are enabled for
metadata:
assertion failed: folio, in fs/btrfs/extent_io.c:4358
------------[ cut here ]------------
kernel BUG at fs/btrfs/extent_io.c:4358!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 30916 Comm: fsstress Tainted: G OE 6.7.0-rc3-custom+ #128
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022
RIP: 0010:assert_eb_folio_uptodate+0x98/0xe0 [btrfs]
Call Trace:
<TASK>
extent_buffer_test_bit+0x3c/0x70 [btrfs]
free_space_test_bit+0xcd/0x140 [btrfs]
modify_free_space_bitmap+0x27a/0x430 [btrfs]
add_to_free_space_tree+0x8d/0x160 [btrfs]
__btrfs_free_extent.isra.0+0xef1/0x13c0 [btrfs]
__btrfs_run_delayed_refs+0x786/0x13c0 [btrfs]
btrfs_run_delayed_refs+0x33/0x120 [btrfs]
btrfs_commit_transaction+0xa2/0x1350 [btrfs]
iterate_supers+0x77/0xe0
ksys_sync+0x60/0xa0
__do_sys_sync+0xa/0x20
do_syscall_64+0x3f/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
[CAUSE]
The function extent_buffer_test_bit() is not folio compatible.
It still assumes the old fixed page size, when an extent buffer with
large folio passed in, only eb->folios[0] is populated.
Then if the target bit range falls in the 2nd page of the folio, then we
would check eb->folios[1], and trigger the ASSERT().
[FIX]
Just migrate eb_bitmap_offset() to folio interfaces, using the
folio_size() to replace PAGE_SIZE.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we still go the old page based iterator functions, like
bio_for_each_segment_all(), we can hit middle pages of a folio (compound
page).
In that case if we set any page flag on those middle pages, we can
easily trigger VM_BUG_ON(), as for compound page flags, they should
follow their flag policies (normally only set on leading or tail pages).
To avoid such problem in the future full folio migration, here we do:
- Change from bio_for_each_segment_all() to bio_for_each_folio_all()
This completely removes the ability to access the middle page.
- Add extra ASSERT()s for data read/write paths
To ensure we only get single paged folio for data now.
- Rename those end io functions to follow a certain schema
* end_bbio_compressed_read()
* end_bbio_compressed_write()
These two endio functions don't set any page flags, as they use pages
not mapped to any address space.
They can be very good candidates for higher order folio testing.
And they are shared between compression and encoded IO.
* end_bbio_data_read()
* end_bbio_data_write()
* end_bbio_meta_read()
* end_bbio_meta_write()
The old function names are not unified:
- end_bio_extent_writepage()
- end_bio_extent_readpage()
- extent_buffer_write_end_io()
- extent_buffer_read_end_io()
They share no schema on where the "end_*io" string should be, nor can
be confusing just using "extent_buffer" and "extent" to distinguish
data and metadata paths.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Although subpage itself is conflicting with higher folio, since subpage
(sectorsize < PAGE_SIZE and nodesize < PAGE_SIZE) means we will never
need higher order folio, there is a hidden pitfall:
- btrfs_page_*() helpers
Those helpers are an abstraction to handle both subpage and non-subpage
cases, which means we're going to pass pages pointers to those helpers.
And since those helpers are shared between data and metadata paths, it's
unavoidable to let them to handle folios, including higher order
folios).
Meanwhile for true subpage case, we should only have a single page
backed folios anyway, thus add a new ASSERT() for btrfs_subpage_assert()
to ensure that.
Also since those helpers are shared between both data and metadata, add
some extra ASSERT()s for data path to make sure we only get single page
backed folio for now.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These two functions are still using the old page based code, which is
not going to handle larger folios at all.
The migration itself is going to involve the following changes:
- PAGE_SIZE -> folio_size()
- PAGE_SHIFT -> folio_shift()
- get_eb_page_index() -> get_eb_folio_index()
- get_eb_offset_in_page() -> get_eb_offset_in_folio()
And since we're going to support larger folios, although above straight
conversion is good enough, this patch would add extra comments in the
involved functions to explain why the same single line code can now
cover 3 cases:
- folio_size == PAGE_SIZE, sectorsize == PAGE_SIZE, nodesize >= PAGE_SIZE
The common, non-subpage case with per-page folio.
- folio_size > PAGE_SIZE, sectorsize == PAGE_SIZE, nodesize >= PAGE_SIZE
The incoming larger folio, non-subpage case.
- folio_size == PAGE_SIZE, sectorsize < PAGE_SIZE, nodesize < PAGE_SIZE
The existing subpage case, we won't larger folio anyway.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This fixes as case in "btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method".
We have been seeing panics in the CI for the subpage stuff recently, it
happens on btrfs/187 but could potentially happen anywhere.
In the subpage case, if we race with somebody else inserting the same
extent buffer, the error case will end up calling
detach_extent_buffer_page() on the page twice.
This is done first in the bit
for (int i = 0; i < attached; i++)
detach_extent_buffer_page(eb, eb->pages[i];
and then again in btrfs_release_extent_buffer().
This works fine for !subpage because we're the only person who ever has
ourselves on the private, and so when we do the initial
detach_extent_buffer_page() we know we've completely removed it.
However for subpage we could be using this page private elsewhere, so
this results in a double put on the subpage, which can result in an
early freeing.
The fix here is to clear eb->pages[i] for everything we detach. Then
anything still attached to the eb is freed in
btrfs_release_extent_buffer().
Because of this change we must update
btrfs_release_extent_buffer_pages() to not use num_extent_folios,
because it assumes eb->folio[0] is set properly. Since this is only
interested in freeing any pages we have on the extent buffer we can
simply use INLINE_EXTENT_BUFFER_PAGES.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Although we have migrated extent_buffer::pages[] to folios[], we're
still mostly using the folio_page() help to grab the page.
This patch would do the following cleanups for metadata:
- Introduce num_extent_folios() helper
This is to replace most num_extent_pages() callers.
- Use num_extent_folios() to iterate future large folios
This allows us to use things like
bio_add_folio()/bio_add_folio_nofail(), and only set the needed flags
for the folio (aka the leading/tailing page), which reduces the loop
iteration to 1 for large folios.
- Change metadata related functions to use folio pointers
Including their function name, involving:
* attach_extent_buffer_page()
* detach_extent_buffer_page()
* page_range_has_eb()
* btrfs_release_extent_buffer_pages()
* btree_clear_page_dirty()
* btrfs_page_inc_eb_refs()
* btrfs_page_dec_eb_refs()
- Change btrfs_is_subpage() to accept an address_space pointer
This is to allow both page->mapping and folio->mapping to be utilized.
As data is still using the old per-page code, and may keep so for a
while.
- Special corner case place holder for future order mismatches between
extent buffer and inode filemap
For now it's just a block of comments and a dead ASSERT(), no real
handling yet.
The subpage code would still go page, just because subpage and large
folio are conflicting conditions, thus we don't need to bother subpage
with higher order folios at all. Just folio_page(folio, 0) would be
enough.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor styling tweaks ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For now extent_buffer::pages[] are still only accepting single page
pointer, thus we can migrate to folios pretty easily.
As for single page, page and folio are 1:1 mapped, including their page
flags.
This patch would just do the conversion from struct page to struct
folio, providing the first step to higher order folio in the future.
This conversion is pretty simple:
- extent_buffer::pages[] -> extent_buffer::folios[]
- page_address(eb->pages[i]) -> folio_address(eb->pages[i])
- eb->pages[i] -> folio_page(eb->folios[i], 0)
There would be more specific cleanups preparing for the incoming higher
order folio support.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently alloc_extent_buffer() utilizes find_or_create_page() to
allocate one page a time for an extent buffer.
This method has the following disadvantages:
- find_or_create_page() is the legacy way of allocating new pages
With the new folio infrastructure, find_or_create_page() is just
redirected to filemap_get_folio().
- Lacks the way to support higher order (order >= 1) folios
As we can not yet let filemap give us a higher order folio.
This patch would change the workflow by the following way:
Old | new
-----------------------------------+-------------------------------------
| ret = btrfs_alloc_page_array();
for (i = 0; i < num_pages; i++) { | for (i = 0; i < num_pages; i++) {
p = find_or_create_page(); | ret = filemap_add_folio();
/* Attach page private */ | /* Reuse page cache if needed */
/* Reused eb if needed */ |
| /* Attach page private and
| reuse eb if needed */
| }
By this we split the page allocation and private attaching into two
parts, allowing future updates to each part more easily, and migrate to
folio interfaces (especially for possible higher order folios).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The value set as scrub_speed_max accepts size with suffixes
(k/m/g/t/p/e) but we should still validate it for trailing characters,
similar to what we do with chunk_size_store.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The radix-tree has been superseded by the xarray
(https://lwn.net/Articles/745073), this patch converts the
btrfs_root::delayed_nodes, the APIs are used in a simple way.
First idea is to do xa_insert() but this would require GFP_ATOMIC
allocation which we want to avoid if possible. The preload mechanism of
radix-tree can be emulated within the xarray API.
- xa_reserve() with GFP_NOFS outside of the lock, the reserved entry
is inserted atomically at most once
- xa_store() under a lock, in case something races in we can detect that
and xa_load() returns a valid pointer
All uses of xa_load() must check for a valid pointer in case they manage
to get between the xa_reserve() and xa_store(), this is handled in
btrfs_get_delayed_node().
Otherwise the functionality is equivalent, xarray implements the
radix-tree and there should be no performance difference.
The patch continues the efforts started in 253bf57555e451 ("btrfs: turn
delayed_nodes_tree into an XArray") and fixes the problems with locking
and GFP flags 088aea3b97e0ae ("Revert "btrfs: turn delayed_nodes_tree
into an XArray"").
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The definition for btrfs_get_extent() is using "u64 end" as the last
parameter, but in implementation we go "u64 len", and all call sites
follows the implementation.
This can be very confusing during development, as most developers
including me, would just use the snippet returned by LSP (clangd in my
case), which would only check the definition.
Unfortunately this mismatch is introduced from the very beginning of
btrfs.
Fix it to prevent further confusion.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, in struct extent_map, we use an unsigned int (32 bits) to
identify the compression type of an extent and an unsigned long (64 bits
on a 64 bits platform, 32 bits otherwise) for flags. We are only using
6 different flags, so an unsigned long is excessive and we can use flags
to identify the compression type instead of using a dedicated 32 bits
field.
We can easily have tens or hundreds of thousands (or more) of extent maps
on busy and large filesystems, specially with compression enabled or many
or large files with tons of small extents. So it's convenient to have the
extent_map structure as small as possible in order to use less memory.
So remove the compression type field from struct extent_map, use flags
to identify the compression type and shorten the flags field from an
unsigned long to a u32. This saves 8 bytes (on 64 bits platforms) and
reduces the size of the structure from 136 bytes down to 128 bytes, using
now only two cache lines, and increases the number of extent maps we can
have per 4K page from 30 to 32. By using a u32 for the flags instead of
an unsigned long, we no longer use test_bit(), set_bit() and clear_bit(),
but that level of atomicity is not needed as most flags are never cleared
once set (before adding an extent map to the tree), and the ones that can
be cleared or set after an extent map is added to the tree, are always
performed while holding the write lock on the extent map tree, while the
reader holds a lock on the tree or tests for a flag that never changes
once the extent map is in the tree (such as compression flags).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At mergable_maps() instead of having a single if statement with many
ORed and ANDed conditions, refactor it with multiple if statements that
check a single condition and return immediately once a requirement fails.
This makes it easier to read.
Also change the return type from int to bool, make the arguments const
and rename the function from mergable_maps() to mergeable_maps().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The extent map pointer argument for extent_map_end() can be const as we
are not modifyng anything in the extent map. So make it const, as it will
allow further changes to callers that have a const extent map pointer.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When trying to merge an extent map that was just inserted or unpinned, we
will try to merge it with any adjacent extent map that is suitable.
However we will only check if our extent map is mergeable after searching
for the previous and next extent maps in the rbtree, meaning that we are
doing unnecessary calls to rb_prev() and rb_next() in case our extent map
is not mergeable (it's compressed, in the list of modifed extents, being
logged or pinned), wasting CPU time chasing rbtree pointers and pulling
in unnecessary cache lines.
So change the logic to check first if an extent map is mergeable before
searching for the next and previous extent maps in the rbtree.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At unpin_extent_range() we trigger a WARN_ON() when we don't find an
extent map or we find one with a start offset not matching the start
offset of the target range. This however isn't very useful for debugging
because:
1) We don't know which condition was triggered, as they are both in the
same WARN_ON() call;
2) We don't know which inode was affected, from which root, for which
range, what's the start offset of the extent map, and so on.
So trigger a separate warning for each case and log a message for each
case providing information about the inode, its root, the target range,
the generation and the start offset of the extent map we found.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_add_extent_mapping(), in case add_extent_mapping() returned
-EEXIST, it's pointless to assign 0 to 'ret' since we will assign a value
to it shortly after, without 'ret' being used before that. So remove that
pointless assignment.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no need to export add_extent_mapping(), as it's only used inside
extent_map.c and in the self tests. For the tests we can use instead
btrfs_add_extent_mapping(), which will accomplish exactly the same as we
don't expect collisions in any of them. So unexport it and make the tests
use btrfs_add_extent_mapping() instead of add_extent_mapping().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Some error messages of the extent map tests print decimal values of start
offsets and lengths, while other are oddly printing in hexadecimal, which
is far less human friendly, specially taking into consideration that all
the values are small and multiples of 4K, so it's a lot easier to read
them as decimal values. Change the format specifiers to print as decimal
instead.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Several of the extent map tests call btrfs_add_extent_mapping() which is
supposed to succeed and return an extent map through the pointer to
pointer argument. However the tests are deliberately ignoring a NULL
extent map, which is not expected to happen. So change the tests to error
out if a NULL extent map is found.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In test case 4 for extent maps, if we error out we are supposed to print
in interval but instead of printing a non-inclusive end offset, we are
printing the length of the interval, which makes it confusing. So fix
that to print the exclusive end offset instead.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When setting up a new extent map, at setup_extent_mapping(), we're doing
a list move operation to add the extent map the tree's list of modified
extents. This is confusing because at this point the extent map can not
be in any list, because it's a new extent map. So replace the list move
with a list add and add an assertion that checks that the extent map is
not currently in any list.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The file_extent_tree was added in 41a2ee75aab0 ("btrfs: introduce
per-inode file extent tree") so we have an explicit mapping of the file
extents to know where it is safe to update i_size. When the feature
NO_HOLES is enabled, and it's been a mkfs default since 5.15, the tree
is not necessary.
To save some space in the inode, allocate the tree only when necessary.
This reduces size by 16 bytes from 1096 to 1080 on a x86_64 release
config.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When profiling a workload I noticed we were constantly calling getxattr.
These were mostly coming from __remove_privs, which will lookup if
security.capability exists to remove it. However instrumenting getxattr
showed we get called nearly constantly on an idle machine on a lot of
accesses.
These are wasteful and not free. Other security LSMs have a way to
cache their results, but capability doesn't have this, so it's asking us
all the time for the xattr.
Fix this by setting a flag in our inode that it doesn't have a
security.capability xattr. We set this on new inodes and after a failed
lookup of security.capability. If we set this xattr at all we'll clear
the flag.
I haven't found a test in fsperf that this makes a visible difference
on, but I assume fs_mark related tests would show it clearly. This is a
perf report output of the smallfiles100k run where it shows 20% of our
time spent in __remove_privs because we're looking up the non-existent
xattr.
--21.86%--btrfs_write_check.constprop.0
--21.62%--__file_remove_privs
--21.55%--security_inode_need_killpriv
--21.54%--cap_inode_need_killpriv
--21.53%--__vfs_getxattr
--20.89%--btrfs_getxattr
Obviously this is just CPU time in a mostly IO bound test, so the actual
effect of removing this callchain is minimal. However in just normal
testing of an idle system tracing showed around 100 getxattr calls per
minute, and with this patch there are 0.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We've deprecated these a while ago in 5.11, go ahead and remove the code
for them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
