summaryrefslogtreecommitdiff
path: root/fs/cachefiles
AgeCommit message (Collapse)AuthorFilesLines
2017-11-28fs: annotate ->poll() instancesAl Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-16mm: remove __GFP_COLDMel Gorman1-4/+2
As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16mm, pagevec: remove cold parameter for pagevecsMel Gorman1-2/+2
Every pagevec_init user claims the pages being released are hot even in cases where it is unlikely the pages are hot. As no one cares about the hotness of pages being released to the allocator, just ditch the parameter. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)David Howells1-1/+1
Firstly by applying the following with coccinelle's spatch: @@ expression SB; @@ -SB->s_flags & MS_RDONLY +sb_rdonly(SB) to effect the conversion to sb_rdonly(sb), then by applying: @@ expression A, SB; @@ ( -(!sb_rdonly(SB)) && A +!sb_rdonly(SB) && A | -A != (sb_rdonly(SB)) +A != sb_rdonly(SB) | -A == (sb_rdonly(SB)) +A == sb_rdonly(SB) | -!(sb_rdonly(SB)) +!sb_rdonly(SB) | -A && (sb_rdonly(SB)) +A && sb_rdonly(SB) | -A || (sb_rdonly(SB)) +A || sb_rdonly(SB) | -(sb_rdonly(SB)) != A +sb_rdonly(SB) != A | -(sb_rdonly(SB)) == A +sb_rdonly(SB) == A | -(sb_rdonly(SB)) && A +sb_rdonly(SB) && A | -(sb_rdonly(SB)) || A +sb_rdonly(SB) || A ) @@ expression A, B, SB; @@ ( -(sb_rdonly(SB)) ? 1 : 0 +sb_rdonly(SB) | -(sb_rdonly(SB)) ? A : B +sb_rdonly(SB) ? A : B ) to remove left over excess bracketage and finally by applying: @@ expression A, SB; @@ ( -(A & MS_RDONLY) != sb_rdonly(SB) +(bool)(A & MS_RDONLY) != sb_rdonly(SB) | -(A & MS_RDONLY) == sb_rdonly(SB) +(bool)(A & MS_RDONLY) == sb_rdonly(SB) ) to make comparisons against the result of sb_rdonly() (which is a bool) work correctly. Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-20sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list namingIngo Molnar1-1/+1
So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into ↵Ingo Molnar1-1/+1
<linux/wait_bit.h> The wait_bit*() types and APIs are mixed into wait.h, but they are a pretty orthogonal extension of wait-queues. Furthermore, only about 50 kernel files use these APIs, while over 1000 use the regular wait-queue functionality. So clean up the main wait.h by moving the wait-bit functionality out of it, into a separate .h and .c file: include/linux/wait_bit.h for types and APIs kernel/sched/wait_bit.c for the implementation Update all header dependencies. This reduces the size of wait.h rather significantly, by about 30%. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar3-3/+3
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>Ingo Molnar1-0/+1
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-11Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: ">rename2() work from Miklos + current_time() from Deepa" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Replace current_fs_time() with current_time() fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps fs: Replace CURRENT_TIME with current_time() for inode timestamps fs: proc: Delete inode time initializations in proc_alloc_inode() vfs: Add current_time() api vfs: add note about i_op->rename changes to porting fs: rename "rename2" i_op to "rename" vfs: remove unused i_op->rename fs: make remaining filesystems use .rename2 libfs: support RENAME_NOREPLACE in simple_rename() fs: support RENAME_NOREPLACE for local filesystems ncpfs: fix unused variable warning
2016-10-11Merge branch 'work.xattr' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs xattr updates from Al Viro: "xattr stuff from Andreas This completes the switch to xattr_handler ->get()/->set() from ->getxattr/->setxattr/->removexattr" * 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Remove {get,set,remove}xattr inode operations xattr: Stop calling {get,set,remove}xattr inode operations vfs: Check for the IOP_XATTR flag in listxattr xattr: Add __vfs_{get,set,remove}xattr helpers libfs: Use IOP_XATTR flag for empty directory handling vfs: Use IOP_XATTR flag for bad-inode handling vfs: Add IOP_XATTR inode operations flag vfs: Move xattr_resolve_name to the front of fs/xattr.c ecryptfs: Switch to generic xattr handlers sockfs: Get rid of getxattr iop sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names kernfs: Switch to generic xattr handlers hfs: Switch to generic xattr handlers jffs2: Remove jffs2_{get,set,remove}xattr macros xattr: Remove unnecessary NULL attribute name check
2016-10-08xattr: Add __vfs_{get,set,remove}xattr helpersAndreas Gruenbacher2-4/+4
Right now, various places in the kernel check for the existence of getxattr, setxattr, and removexattr inode operations and directly call those operations. Switch to helper functions and test for the IOP_XATTR flag instead. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Acked-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-28cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]David Howells3-6/+13
An NULL-pointer dereference happens in cachefiles_mark_object_inactive() when it tries to read i_blocks so that it can tell the cachefilesd daemon how much space it's making available. The problem is that cachefiles_drop_object() calls cachefiles_mark_object_inactive() after calling cachefiles_delete_object() because the object being marked active staves off attempts to (re-)use the file at that filename until after it has been deleted. This means that d_inode is NULL by the time we come to try to access it. To fix the problem, have the caller of cachefiles_mark_object_inactive() supply the number of blocks freed up. Without this, the following oops may occur: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 IP: [<ffffffffa06c5cc1>] cachefiles_mark_object_inactive+0x61/0xb0 [cachefiles] ... CPU: 11 PID: 527 Comm: kworker/u64:4 Tainted: G I ------------ 3.10.0-470.el7.x86_64 #1 Hardware name: Hewlett-Packard HP Z600 Workstation/0B54h, BIOS 786G4 v03.19 03/11/2011 Workqueue: fscache_object fscache_object_work_func [fscache] task: ffff880035edaf10 ti: ffff8800b77c0000 task.ti: ffff8800b77c0000 RIP: 0010:[<ffffffffa06c5cc1>] cachefiles_mark_object_inactive+0x61/0xb0 [cachefiles] RSP: 0018:ffff8800b77c3d70 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800bf6cc400 RCX: 0000000000000034 RDX: 0000000000000000 RSI: ffff880090ffc710 RDI: ffff8800bf761ef8 RBP: ffff8800b77c3d88 R08: 2000000000000000 R09: 0090ffc710000000 R10: ff51005d2ff1c400 R11: 0000000000000000 R12: ffff880090ffc600 R13: ffff8800bf6cc520 R14: ffff8800bf6cc400 R15: ffff8800bf6cc498 FS: 0000000000000000(0000) GS:ffff8800bb8c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000098 CR3: 00000000019ba000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880090ffc600 ffff8800bf6cc400 ffff8800867df140 ffff8800b77c3db0 ffffffffa06c48cb ffff880090ffc600 ffff880090ffc180 ffff880090ffc658 ffff8800b77c3df0 ffffffffa085d846 ffff8800a96b8150 ffff880090ffc600 Call Trace: [<ffffffffa06c48cb>] cachefiles_drop_object+0x6b/0xf0 [cachefiles] [<ffffffffa085d846>] fscache_drop_object+0xd6/0x1e0 [fscache] [<ffffffffa085d615>] fscache_object_work_func+0xa5/0x200 [fscache] [<ffffffff810a605b>] process_one_work+0x17b/0x470 [<ffffffff810a6e96>] worker_thread+0x126/0x410 [<ffffffff810a6d70>] ? rescuer_thread+0x460/0x460 [<ffffffff810ae64f>] kthread+0xcf/0xe0 [<ffffffff810ae580>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81695418>] ret_from_fork+0x58/0x90 [<ffffffff810ae580>] ? kthread_create_on_node+0x140/0x140 The oopsing code shows: callq 0xffffffff810af6a0 <wake_up_bit> mov 0xf8(%r12),%rax mov 0x30(%rax),%rax mov 0x98(%rax),%rax <---- oops here lock add %rax,0x130(%rbx) where this is: d_backing_inode(object->dentry)->i_blocks Fixes: a5b3a80b899bda0f456f1246c4c5a1191ea01519 (CacheFiles: Provide read-and-reset release counters for cachefilesd) Reported-by: Jianhong Yin <jiyin@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Steve Dickson <steved@redhat.com> cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27fs: rename "rename2" i_op to "rename"Miklos Szeredi1-1/+1
Generated patch: sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2` sed -i "s/\brename2\b/rename/g" `git grep -wl rename2` Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27vfs: remove unused i_op->renameMiklos Szeredi1-2/+1
No in-tree uses remain. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-08-03cachefiles: Fix race between inactivating and culling a cache objectDavid Howells1-2/+3
There's a race between cachefiles_mark_object_inactive() and cachefiles_cull(): (1) cachefiles_cull() can't delete a backing file until the cache object is marked inactive, but as soon as that's the case it's fair game. (2) cachefiles_mark_object_inactive() marks the object as being inactive and *only then* reads the i_blocks on the backing inode - but cachefiles_cull() might've managed to delete it by this point. Fix this by making sure cachefiles_mark_object_inactive() gets any data it needs from the backing inode before deactivating the object. Without this, the following oops may occur: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 IP: [<ffffffffa06c5cc1>] cachefiles_mark_object_inactive+0x61/0xb0 [cachefiles] ... CPU: 11 PID: 527 Comm: kworker/u64:4 Tainted: G I ------------ 3.10.0-470.el7.x86_64 #1 Hardware name: Hewlett-Packard HP Z600 Workstation/0B54h, BIOS 786G4 v03.19 03/11/2011 Workqueue: fscache_object fscache_object_work_func [fscache] task: ffff880035edaf10 ti: ffff8800b77c0000 task.ti: ffff8800b77c0000 RIP: 0010:[<ffffffffa06c5cc1>] cachefiles_mark_object_inactive+0x61/0xb0 [cachefiles] RSP: 0018:ffff8800b77c3d70 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800bf6cc400 RCX: 0000000000000034 RDX: 0000000000000000 RSI: ffff880090ffc710 RDI: ffff8800bf761ef8 RBP: ffff8800b77c3d88 R08: 2000000000000000 R09: 0090ffc710000000 R10: ff51005d2ff1c400 R11: 0000000000000000 R12: ffff880090ffc600 R13: ffff8800bf6cc520 R14: ffff8800bf6cc400 R15: ffff8800bf6cc498 FS: 0000000000000000(0000) GS:ffff8800bb8c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000098 CR3: 00000000019ba000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880090ffc600 ffff8800bf6cc400 ffff8800867df140 ffff8800b77c3db0 ffffffffa06c48cb ffff880090ffc600 ffff880090ffc180 ffff880090ffc658 ffff8800b77c3df0 ffffffffa085d846 ffff8800a96b8150 ffff880090ffc600 Call Trace: [<ffffffffa06c48cb>] cachefiles_drop_object+0x6b/0xf0 [cachefiles] [<ffffffffa085d846>] fscache_drop_object+0xd6/0x1e0 [fscache] [<ffffffffa085d615>] fscache_object_work_func+0xa5/0x200 [fscache] [<ffffffff810a605b>] process_one_work+0x17b/0x470 [<ffffffff810a6e96>] worker_thread+0x126/0x410 [<ffffffff810a6d70>] ? rescuer_thread+0x460/0x460 [<ffffffff810ae64f>] kthread+0xcf/0xe0 [<ffffffff810ae580>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81695418>] ret_from_fork+0x58/0x90 [<ffffffff810ae580>] ? kthread_create_on_node+0x140/0x140 The oopsing code shows: callq 0xffffffff810af6a0 <wake_up_bit> mov 0xf8(%r12),%rax mov 0x30(%rax),%rax mov 0x98(%rax),%rax <---- oops here lock add %rax,0x130(%rbx) where this is: d_backing_inode(object->dentry)->i_blocks Fixes: a5b3a80b899bda0f456f1246c4c5a1191ea01519 (CacheFiles: Provide read-and-reset release counters for cachefilesd) Reported-by: Jianhong Yin <jiyin@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Steve Dickson <steved@redhat.com> cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-07-01Merge branch 'd_real' of ↵Al Viro1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into work.misc
2016-06-01FS-Cache: make check_consistency callback return intYan, Zheng1-1/+1
__fscache_check_consistency() calls check_consistency() callback and return the callback's return value. But the return type of check_consistency() is bool. So __fscache_check_consistency() return 1 if the cache is inconsistent. This is inconsistent with the document. Signed-off-by: Yan, Zheng <zyan@redhat.com> Acked-by: David Howells <dhowells@redhat.com>
2016-05-30drop redundant ->owner initializationsAl Viro1-1/+0
it's not needed for file_operations of inodes located on fs defined in the hosting module and for file_operations that go into procfs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-19/+19
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-01CacheFiles: Provide read-and-reset release counters for cachefilesdDavid Howells4-17/+39
Provide read-and-reset objects- and blocks-released counters for cachefilesd to use to work out whether there's anything new that can be culled. One of the problems cachefilesd has is that if all the objects in the cache are pinned by inodes lying dormant in the kernel inode cache, there isn't anything for it to cull. In such a case, it just spins around walking the filesystem tree and scanning for something to cull. This eats up a lot of CPU time. By telling cachefilesd if there have been any releases, the daemon can sleep until there is the possibility of something to do. cachefilesd finds this information by the following means: (1) When the control fd is read, the kernel presents a list of values of interest. "freleased=N" and "breleased=N" are added to this list to indicate the number of files released and number of blocks released since the last read call. At this point the counters are reset. (2) POLLIN is signalled if the number of files released becomes greater than 0. Note that by 'released' it just means that the kernel has released its interest in those files for the moment, not necessarily that the files should be deleted from the cache. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Steve Dickson <steved@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-23wrappers for ->i_mutex accessAl Viro2-22/+22
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04convert a bunch of open-coded instances of memdup_user_nul()Al Viro1-9/+3
A _lot_ of ->write() instances were open-coding it; some are converted to memdup_user_nul(), a lot more remain... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-17FS-Cache: Add missing initialization of ret in cachefiles_write_page()Geert Uytterhoeven1-1/+1
fs/cachefiles/rdwr.c: In function ‘cachefiles_write_page’: fs/cachefiles/rdwr.c:882: warning: ‘ret’ may be used uninitialized in this function If the jump to label "error" is taken, "ret" will indeed be uninitialized, and random stack data may be printed by the debug code. Fixes: 102f4d900c9c8f5e ("FS-Cache: Handle a write to the page immediately beyond the EOF marker") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11FS-Cache: Handle a write to the page immediately beyond the EOF markerDavid Howells1-30/+37
Handle a write being requested to the page immediately beyond the EOF marker on a cache object. Currently this gets an assertion failure in CacheFiles because the EOF marker is used there to encode information about a partial page at the EOF - which could lead to an unknown blank spot in the file if we extend the file over it. The problem is actually in fscache where we check the index of the page being written against store_limit. store_limit is set to the number of pages that we're allowed to store by fscache_set_store_limit() - which means it's one more than the index of the last page we're allowed to store. The problem is that we permit writing to a page with an index _equal_ to the store limit - when we should reject that case. Whilst we're at it, change the triggered assertion in CacheFiles to just return -ENOBUFS instead. The assertion failure looks something like this: CacheFiles: Assertion failed 1000 < 7b1 is false ------------[ cut here ]------------ kernel BUG at fs/cachefiles/rdwr.c:962! ... RIP: 0010:[<ffffffffa02c9e83>] [<ffffffffa02c9e83>] cachefiles_write_page+0x273/0x2d0 [cachefiles] Cc: stable@vger.kernel.org # v2.6.31+; earlier - that + backport of a17754f (at least) Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11cachefiles: perform test on s_blocksize when opening cache file.NeilBrown2-6/+2
cachefiles requires that s_blocksize in the cache is not greater than PAGE_SIZE, and performs the check every time a block is accessed. Move the test to the place where the file is "opened", where other file-validity tests are performed. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-07mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIMMel Gorman1-1/+1
__GFP_WAIT was used to signal that the caller was in atomic context and could not sleep. Now it is possible to distinguish between true atomic context and callers that are not willing to sleep. The latter should clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing __GFP_WAIT behaves differently, there is a risk that people will clear the wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly indicate what it does -- setting it allows all reclaim activity, clearing them prevents it. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24Merge branch 'fscache-fixes' into for-nextAl Viro2-13/+21
2015-04-15VFS: fs/cachefiles: d_backing_inode() annotationsDavid Howells6-62/+62
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: Cachefiles should perform fs modifications on the top layer onlyDavid Howells2-28/+28
Cachefiles should perform fs modifications (eg. vfs_unlink()) on the top layer only and should not attempt to alter the lower layer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-24FS-Cache: Count culled objects and objects rejected due to lack of spaceDavid Howells2-13/+21
Count the number of objects that get culled by the cache backend and the number of objects that the cache backend declines to instantiate due to lack of space in the cache. These numbers are made available through /proc/fs/fscache/stats Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Steve Dickson <steved@redhat.com> Acked-by: Jeff Layton <jeff.layton@primarydata.com>
2015-02-22Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversionsDavid Howells4-9/+9
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack thereof) in cachefiles: (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as it doesn't want to deal with automounts in its cache. (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in cachefiles. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-22VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)David Howells2-10/+10
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-19assorted conversions to %p[dD]Al Viro2-22/+14
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-14Merge tag 'fscache-fixes-20141013' of ↵Linus Torvalds2-14/+21
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull fs-cache fixes from David Howells: "Two fixes for bugs in CacheFiles and a cleanup in FS-Cache" * tag 'fscache-fixes-20141013' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: fs/fscache/object-list.c: use __seq_open_private() CacheFiles: Fix incorrect test for in-memory object collision CacheFiles: Handle object being killed before being set up
2014-10-13CacheFiles: Fix incorrect test for in-memory object collisionDavid Howells1-1/+1
When CacheFiles cache objects are in use, they have in-memory representations, as defined by the cachefiles_object struct. These are kept in a tree rooted in the cache and indexed by dentry pointer (since there's a unique mapping between object index key and dentry). Collisions can occur between a representation already in the tree and a new representation being set up because it takes time to dispose of an old representation - particularly if it must be unlinked or renamed. When such a collision occurs, cachefiles_mark_object_active() is meant to check to see if the old, already-present representation is in the process of being discarded (ie. FSCACHE_OBJECT_IS_LIVE is not set on it) - and, if so, wait for the representation to be removed (ie. CACHEFILES_OBJECT_ACTIVE is then cleared). However, the test for whether the old representation is still live is checking the new object - which always will be live at this point. This leads to an oops looking like: CacheFiles: Error: Unexpected object collision object: OBJ1b354 objstate=LOOK_UP_OBJECT fl=8 wbusy=2 ev=0[0] ops=0 inp=0 exc=0 parent=ffff88053f5417c0 cookie=ffff880538f202a0 [pr=ffff8805381b7160 nd=ffff880509c6eb78 fl=27] key=[8] '2490000000000000' xobject: OBJ1a600 xobjstate=DROP_OBJECT fl=70 wbusy=2 ev=0[0] xops=0 inp=0 exc=0 xparent=ffff88053f5417c0 xcookie=ffff88050f4cbf70 [pr=ffff8805381b7160 nd= (null) fl=12] ------------[ cut here ]------------ kernel BUG at fs/cachefiles/namei.c:200! ... Workqueue: fscache_object fscache_object_work_func [fscache] ... RIP: ... cachefiles_walk_to_object+0x7ea/0x860 [cachefiles] ... Call Trace: [<ffffffffa04dadd8>] ? cachefiles_lookup_object+0x58/0x100 [cachefiles] [<ffffffffa01affe9>] ? fscache_look_up_object+0xb9/0x1d0 [fscache] [<ffffffffa01afc4d>] ? fscache_parent_ready+0x2d/0x80 [fscache] [<ffffffffa01b0672>] ? fscache_object_work_func+0x92/0x1f0 [fscache] [<ffffffff8107e82b>] ? process_one_work+0x16b/0x400 [<ffffffff8107fc16>] ? worker_thread+0x116/0x380 [<ffffffff8107fb00>] ? manage_workers.isra.21+0x290/0x290 [<ffffffff81085edc>] ? kthread+0xbc/0xe0 [<ffffffff81085e20>] ? flush_kthread_worker+0x80/0x80 [<ffffffff81502d0c>] ? ret_from_fork+0x7c/0xb0 [<ffffffff81085e20>] ? flush_kthread_worker+0x80/0x80 Reported-by: Manuel Schölling <manuel.schoelling@gmx.de> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Steve Dickson <steved@redhat.com>
2014-10-09cachefiles_write_page(): switch to __kernel_write()Al Viro1-29/+19
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-30CacheFiles: Handle object being killed before being set upDavid Howells1-13/+20
If a cache object gets killed whilst in the process of being set up - for instance if the netfs relinquishes the cookie that the object is associated with - then the object's state machine will transit to the DROP_OBJECT state without necessarily going through the LOOKUP_OBJECT or CREATE_OBJECT states. This is a problem for CacheFiles because cachefiles_drop_object() assumes that object->dentry will be set upon reaching the DROP_OBJECT state and has an ASSERT() to that effect (see the oops below) - but object->dentry doesn't get set until the LOOKUP_OBJECT or CREATE_OBJECT states (and not always then if they fail). To fix this, just make the dentry cleanup in cachefiles_drop_object() conditional on the dentry actually being set and remove the assertion. CacheFiles: Assertion failed ------------[ cut here ]------------ kernel BUG at .../fs/cachefiles/namei.c:425! ... Workqueue: fscache_object fscache_object_work_func [fscache] ... RIP: ... cachefiles_delete_object+0xcd/0x110 [cachefiles] ... Call Trace: [<ffffffffa043280f>] ? cachefiles_drop_object+0xff/0x130 [cachefiles] [<ffffffffa02ac511>] ? fscache_drop_object+0xd1/0x1d0 [fscache] [<ffffffffa02ac697>] ? fscache_object_work_func+0x87/0x210 [fscache] [<ffffffff81080635>] ? process_one_work+0x155/0x450 [<ffffffff81081c44>] ? worker_thread+0x114/0x370 [<ffffffff81081b30>] ? manage_workers.isra.21+0x2c0/0x2c0 [<ffffffff81087fcc>] ? kthread+0xbc/0xe0 [<ffffffff81087f10>] ? flush_kthread_worker+0xa0/0xa0 [<ffffffff8150638c>] ? ret_from_fork+0x7c/0xb0 [<ffffffff81087f10>] ? flush_kthread_worker+0xa0/0xa0 Reported-by: Manuel Schölling <manuel.schoelling@gmx.de> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Steve Dickson <steved@redhat.com>
2014-09-26fs/cachefiles: add missing \n to kerror conversionsFabian Frederick6-33/+33
Commit 0227d6abb378 ("fs/cachefiles: replace kerror by pr_err") didn't include newline featuring in original kerror definition Signed-off-by: Fabian Frederick <fabf@skynet.be> Reported-by: David Howells <dhowells@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> [3.16.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-18CacheFiles: Handle rename2David Howells1-1/+2
Not all filesystems now provide the rename i_op - ext4 for one - but rather provide the rename2 i_op. CacheFiles checks that the filesystem has rename and so will reject ext4 now with EPERM: CacheFiles: Failed to register: -1 Fix this by checking for rename2 as an alternative. The call to vfs_rename() actually handles selection of the appropriate function, so we needn't worry about that. Turning on debugging shows: [cachef] ==> cachefiles_get_directory(,,cache) [cachef] subdir -> ffff88000b22b778 positive [cachef] <== cachefiles_get_directory() = -1 [check] where -1 is EPERM. Signed-off-by: David Howells <dhowells@redhat.com>
2014-09-18cachefiles: remove two unused pagevecs.NeilBrown1-6/+0
These two have been unused since commit c4d6d8dbf335c7fa47341654a37c53a512b519bb CacheFiles: Fix the marking of cached pages in 3.8. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: David Howells <dhowells@redhat.com>
2014-06-07fs/cachefiles: replace kerror by pr_errFabian Frederick8-54/+58
Also add pr_fmt in internal.h Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07FS/CACHEFILES: convert printk to pr_foo()Fabian Frederick6-52/+39
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-13Merge branch 'for-linus' of ↵Linus Torvalds2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-05Merge branch 'cross-rename' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull renameat2 system call from Miklos Szeredi: "This adds a new syscall, renameat2(), which is the same as renameat() but with a flags argument. The purpose of extending rename is to add cross-rename, a symmetric variant of rename, which exchanges the two files. This allows interesting things, which were not possible before, for example atomically replacing a directory tree with a symlink, etc... This also allows overlayfs and friends to operate on whiteouts atomically. Andy Lutomirski also suggested a "noreplace" flag, which disables the overwriting behavior of rename. These two flags, RENAME_EXCHANGE and RENAME_NOREPLACE are only implemented for ext4 as an example and for testing" * 'cross-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ext4: add cross rename support ext4: rename: split out helper functions ext4: rename: move EMLINK check up ext4: rename: create ext4_renament structure for local vars vfs: add cross-rename vfs: lock_two_nondirectories: allow directory args security: add flags to rename hooks vfs: add RENAME_NOREPLACE flag vfs: add renameat2 syscall vfs: rename: use common code for dir and non-dir vfs: rename: move d_move() up vfs: add d_is_dir()
2014-04-04fs: cachefiles: use add_to_page_cache_lru()Johannes Weiner1-20/+13
This code used to have its own lru cache pagevec up until a0b8cab3 ("mm: remove lru parameter from __pagevec_lru_add and remove parts of pagevec API"). Now it's just add_to_page_cache() followed by lru_cache_add(), might as well use add_to_page_cache_lru() directly. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-02get rid of pointless checks for NULL ->i_opAl Viro2-3/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01security: add flags to rename hooksMiklos Szeredi1-1/+1
Add flags to security_path_rename() and security_inode_rename() hooks. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: J. Bruce Fields <bfields@redhat.com>
2014-04-01vfs: add renameat2 syscallMiklos Szeredi1-1/+1
Add new renameat2 syscall, which is the same as renameat with an added flags argument. Pass flags to vfs_rename() and to i_op->rename() as well. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: J. Bruce Fields <bfields@redhat.com>
2013-11-13Merge branch 'for-linus' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "All kinds of stuff this time around; some more notable parts: - RCU'd vfsmounts handling - new primitives for coredump handling - files_lock is gone - Bruce's delegations handling series - exportfs fixes plus misc stuff all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits) ecryptfs: ->f_op is never NULL locks: break delegations on any attribute modification locks: break delegations on link locks: break delegations on rename locks: helper functions for delegation breaking locks: break delegations on unlink namei: minor vfs_unlink cleanup locks: implement delegations locks: introduce new FL_DELEG lock flag vfs: take i_mutex on renamed file vfs: rename I_MUTEX_QUOTA now that it's not used for quotas vfs: don't use PARENT/CHILD lock classes for non-directories vfs: pull ext4's double-i_mutex-locking into common code exportfs: fix quadratic behavior in filehandle lookup exportfs: better variable name exportfs: move most of reconnect_path to helper function exportfs: eliminate unused "noprogress" counter exportfs: stop retrying once we race with rename/remove exportfs: clear DISCONNECTED on all parents sooner exportfs: more detailed comment for path_reconnect ...