Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull ceph updates from Ilya Dryomov:
- support for idmapped mounts in CephFS (Christian Brauner, Alexander
Mikhalitsyn).
The series was originally developed by Christian and later picked up
and brought over the finish line by Alexander, who also contributed
an enabler on the MDS side (separate owner_{u,g}id fields on the
wire).
The required exports for mnt_idmap_{get,put}() in VFS have been acked
by Christian and received no objection from Christoph.
- a churny change in CephFS logging to include cluster and client
identifiers in log and debug messages (Xiubo Li).
This would help in scenarios with dozens of CephFS mounts on the same
node which are getting increasingly common, especially in the
Kubernetes world.
* tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client:
ceph: allow idmapped mounts
ceph: allow idmapped atomic_open inode op
ceph: allow idmapped set_acl inode op
ceph: allow idmapped setattr inode op
ceph: pass idmap to __ceph_setattr
ceph: allow idmapped permission inode op
ceph: allow idmapped getattr inode op
ceph: pass an idmapping to mknod/symlink/mkdir
ceph: add enable_unsafe_idmap module parameter
ceph: handle idmapped mounts in create_request_message()
ceph: stash idmapping in mdsc request
fs: export mnt_idmap_get/mnt_idmap_put
libceph, ceph: move mdsmap.h to fs/ceph
ceph: print cluster fsid and client global_id in all debug logs
ceph: rename _to_client() to _to_fs_client()
ceph: pass the mdsc to several helpers
libceph: add doutc and *_client debug macros support
|
|
Enable ceph_atomic_open() to handle idmapped mounts. This is just a
matter of passing down the mount's idmapping.
[ aleksandr.mikhalitsyn: adapted to 5fadbd9929 ("ceph: rely on vfs for
setgid stripping") ]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
We will use the 'mdsc' to get the global_id in the following commits.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
|
|
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-22-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In this code "ret" is type long and "src_objlen" is unsigned int. The
problem is that on 32bit systems, when we do the comparison signed longs
are type promoted to unsigned int. So negative error codes from
do_splice_direct() are treated as success instead of failure.
Cc: stable@vger.kernel.org
Fixes: 1b0c3b9f91f0 ("ceph: re-org copy_file_range and fix some error paths")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Instead of setting the no-key dentry, use the new
fscrypt_prepare_lookup_partial() helper. We still need to mark the
directory as incomplete if the directory was just unlocked.
In ceph_atomic_open() this fixes a bug where a dentry is incorrectly
set with DCACHE_NOKEY_NAME when 'dir' has been evicted but the key is
still available (for example, where there's a drop_caches).
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When doing a direct/sync write, we need to invalidate the page cache in
the range being written to. If we don't do this, the cache will include
invalid data as we just did a write that avoided the page cache.
In the event that invalidation fails, just ignore the error. That likely
just means that we raced with another task doing a buffered write, in
which case we want to leave the page intact anyway.
[ jlayton: minor comment update ]
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Force the use of sparse reads when the inode is encrypted, and add the
appropriate code to decrypt the extent map after receiving.
Note that the crypto block may be smaller than a page, but the reverse
cannot be true.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When doing a synchronous write on an encrypted inode, we have no
guarantee that the caller is writing crypto block-aligned data. When
that happens, we must do a read/modify/write cycle.
First, expand the range to cover complete blocks. If we had to change
the original pos or length, issue a read to fill the first and/or last
pages, and fetch the version of the object from the result.
We then copy data into the pages as usual, encrypt the result and issue
a write prefixed by an assertion that the version hasn't changed. If it has
changed then we restart the whole thing again.
If there is no object at that position in the file (-ENOENT), we prefix
the write on an exclusive create of the object instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Encrypted files will need to be dealt with in block-sized chunks and
once we do that, the way that ceph_sync_write aligns the data in the
bounce buffer won't be acceptable.
Change it to align the data the same way it would be aligned in the
pagecache.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Eventually I want to merge the synchronous and direct read codepaths,
possibly via new netfs infrastructure. For now, the direct path is not
crypto-enabled, so use the sync read/write paths instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Turn the guts of ceph_sync_read into a new helper that takes an inode
and an offset instead of a kiocb struct, and make ceph_sync_read call
the helper as a wrapper.
Make the new helper always return the last object's version.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
For encrypted inodes, transmit a rounded-up size to the MDS as the
normal file size and send the real inode size in fscrypt_file field.
Also, fix up creates and truncates to also transmit fscrypt_file.
When we get an inode trace from the MDS, grab the fscrypt_file field if
the inode is encrypted, and use it to populate the i_size field instead
of the regular inode size field.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add the appropriate calls into fscrypt for various actions, including
link, rename, setattr, and the open codepaths.
Disable fallocate for encrypted inodes -- hopefully, just for now.
If we have an encrypted inode, then the client will need to re-encrypt
the contents of the new object. Disable copy offload to or from
encrypted inodes.
Set i_blkbits to crypto block size for encrypted inodes -- some of the
underlying infrastructure for fscrypt relies on i_blkbits being aligned
to crypto blocksize.
Report STATX_ATTR_ENCRYPTED on encrypted inodes.
[ lhenriques: forbid encryption with striped layouts ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
This is required so that we know to invalidate these dentries when the
directory is unlocked.
Atomic open can act as a lookup if handed a dentry that is negative on
the MDS. Ensure that we set DCACHE_NOKEY_NAME on the dentry in
atomic_open, if we don't have the key for the parent. Otherwise, we can
end up validating the dentry inappropriately if someone later adds a
key.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When creating a new inode, we need to determine the crypto context
before we can transmit the RPC. The fscrypt API has a routine for getting
a crypto context before a create occurs, but it requires an inode.
Change the ceph code to preallocate an inode in advance of a create of
any sort (open(), mknod(), symlink(), etc). Move the existing code that
generates the ACL and SELinux blobs into this routine since that's
mostly common across all the different codepaths.
In most cases, we just want to allow ceph_fill_trace to use that inode
after the reply comes in, so add a new field to the MDS request for it
(r_new_inode).
The async create codepath is a bit different though. In that case, we
want to hash the inode in advance of the RPC so that it can be used
before the reply comes in. If the call subsequently fails with
-EJUKEBOX, then just put the references and clean up the as_ctx. Note
that with this change, we now need to regenerate the as_ctx when this
occurs, but it's quite rare for it to happen.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add a new mount option that has the client issue sparse reads instead of
normal ones. The callers now preallocate an sparse extent buffer that
the libceph receive code can populate and hand back after the operation
completes.
After a successful sparse read, we can't use the req->r_result value to
determine the amount of data "read", so instead we set the received
length to be from the end of the last extent in the buffer. Any
interstitial holes will have been filled by the receive code.
[ xiubli: fix a double free on req reported by Ilya ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull ceph updates from Ilya Dryomov:
"A bunch of CephFS fixups from Xiubo, mostly around dropping caps,
along with a fix for a regression in the readahead handling code which
sneaked in with the switch to netfs helpers"
* tag 'ceph-for-6.5-rc1' of https://github.com/ceph/ceph-client:
ceph: don't let check_caps skip sending responses for revoke msgs
ceph: issue a cap release immediately if no cap exists
ceph: trigger to flush the buffer when making snapshot
ceph: fix blindly expanding the readahead windows
ceph: add a dedicated private data for netfs rreq
ceph: voluntarily drop Xx caps for requests those touch parent mtime
ceph: try to dump the msgs when decoding fails
ceph: only send metrics when the MDS rank is ready
|
|
For write requests the parent's mtime will be updated correspondingly.
And if the 'Xx' caps is issued and when releasing other caps together
with the write requests the MDS Locker will try to eval the xattr lock,
which need to change the locker state excl --> sync and need to do Xx
caps revocation.
Just voluntarily dropping CEPH_CAP_XATTR_EXCL caps to avoid a cap
revoke message, which could cause the mtime will be overwrote by stale
one.
[ idryomov: break unnecessarily long lines ]
Link: https://tracker.ceph.com/issues/61584
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
|
|
All callers of generic_perform_write need to updated ki_pos, move it into
common code.
Link: https://lkml.kernel.org/r/20230601145904.1385409-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "cleanup the filemap / direct I/O interaction", v4.
This series cleans up some of the generic write helper calling conventions
and the page cache writeback / invalidation for direct I/O. This is a
spinoff from the no-bufferhead kernel project, for which we'll want to an
use iomap based buffered write path in the block layer.
This patch (of 12):
The last user of current->backing_dev_info disappeared in commit
b9b1335e6403 ("remove bdi_congested() and wb_congested() and related
functions"). Remove the field and all assignments to it.
Link: https://lkml.kernel.org/r/20230601145904.1385409-1-hch@lst.de
Link: https://lkml.kernel.org/r/20230601145904.1385409-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Provide a splice_read wrapper for Ceph. This does the inode shutdown check
before proceeding and jumps to copy_splice_read() if the file has inline
data or is a synchronous file.
We try and get FILE_RD and either FILE_CACHE and/or FILE_LAZYIO caps and
hold them across filemap_splice_read(). If we fail to get FILE_CACHE or
FILE_LAZYIO capabilities, we use copy_splice_read() instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-17-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull ceph fixes from Ilya Dryomov:
"Two small fixes from Xiubo and myself, marked for stable"
* tag 'ceph-for-6.3-rc1' of https://github.com/ceph/ceph-client:
rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
ceph: update the time stamps and try to drop the suid/sgid
|
|
The fallocate will try to clear the suid/sgid if a unprevileged user
changed the file.
There is no POSIX item requires that we should clear the suid/sgid
in fallocate code path but this is the default behaviour for most of
the filesystems and the VFS layer. And also the same for the write
code path, which have already support it.
And also we need to update the time stamps since the fallocate will
change the file contents.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/58054
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
|
|
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-13-hch@lst.de
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When received corrupted snap trace we don't know what exactly has
happened in MDS side. And we shouldn't continue IOs and metadatas
access to MDS, which may corrupt or get incorrect contents.
This patch will just block all the further IO/MDS requests
immediately and then evict the kclient itself.
The reason why we still need to evict the kclient just after
blocking all the further IOs is that the MDS could revoke the caps
faster.
Link: https://tracker.ceph.com/issues/57686
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull cph update from Ilya Dryomov:
"A fix to facilitate prompt cap releases on async creates from Xiubo.
This should address sporadic "client isn't responding to mclientcaps
(revoke) ..." warnings and potential associated MDS hangs"
* tag 'ceph-for-6.2-rc1' of https://github.com/ceph/ceph-client:
ceph: try to check caps immediately after async creating finishes
ceph: remove useless session parameter for check_caps()
|
|
We should call the check_caps() again immediately after the async
creating finishes in case the MDS is waiting for caps revocation
to finish.
Link: https://tracker.ceph.com/issues/46904
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The session parameter makes no sense any more.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull ceph updates from Ilya Dryomov:
"We have a good pile of various fixes and cleanups from Xiubo, Jeff,
Luis and others, almost exclusively in the filesystem.
Several patches touch files outside of our normal purview to set the
stage for bringing in Jeff's long awaited ceph+fscrypt series in the
near future. All of them have appropriate acks and sat in linux-next
for a while"
* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
libceph: clean up ceph_osdc_start_request prototype
libceph: fix ceph_pagelist_reserve() comment typo
ceph: remove useless check for the folio
ceph: don't truncate file in atomic_open
ceph: make f_bsize always equal to f_frsize
ceph: flush the dirty caps immediatelly when quota is approaching
libceph: print fsid and epoch with osd id
libceph: check pointer before assigned to "c->rules[]"
ceph: don't get the inline data for new creating files
ceph: update the auth cap when the async create req is forwarded
ceph: make change_auth_cap_ses a global symbol
ceph: fix incorrect old_size length in ceph_mds_request_args
ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
ceph: call netfs_subreq_terminated with was_async == false
ceph: convert to generic_file_llseek
ceph: fix the incorrect comment for the ceph_mds_caps struct
ceph: don't leak snap_rwsem in handle_cap_grant
ceph: prevent a client from exceeding the MDS maximum xattr size
ceph: choose auth MDS for getxattr with the Xs caps
ceph: add session already open notify support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull setgid updates from Christian Brauner:
"This contains the work to move setgid stripping out of individual
filesystems and into the VFS itself.
Creating files that have both the S_IXGRP and S_ISGID bit raised in
directories that themselves have the S_ISGID bit set requires
additional privileges to avoid security issues.
When a filesystem creates a new inode it needs to take care that the
caller is either in the group of the newly created inode or they have
CAP_FSETID in their current user namespace and are privileged over the
parent directory of the new inode. If any of these two conditions is
true then the S_ISGID bit can be raised for an S_IXGRP file and if not
it needs to be stripped.
However, there are several key issues with the current implementation:
- S_ISGID stripping logic is entangled with umask stripping.
For example, if the umask removes the S_IXGRP bit from the file
about to be created then the S_ISGID bit will be kept.
The inode_init_owner() helper is responsible for S_ISGID stripping
and is called before posix_acl_create(). So we can end up with two
different orderings:
1. FS without POSIX ACL support
First strip umask then strip S_ISGID in inode_init_owner().
In other words, if a filesystem doesn't support or enable POSIX
ACLs then umask stripping is done directly in the vfs before
calling into the filesystem:
2. FS with POSIX ACL support
First strip S_ISGID in inode_init_owner() then strip umask in
posix_acl_create().
In other words, if the filesystem does support POSIX ACLs then
unmask stripping may be done in the filesystem itself when
calling posix_acl_create().
Note that technically filesystems are free to impose their own
ordering between posix_acl_create() and inode_init_owner() meaning
that there's additional ordering issues that influence S_ISGID
inheritance.
(Note that the commit message of commit 1639a49ccdce ("fs: move
S_ISGID stripping into the vfs_*() helpers") gets the ordering
between inode_init_owner() and posix_acl_create() the wrong way
around. I realized this too late.)
- Filesystems that don't rely on inode_init_owner() don't get S_ISGID
stripping logic.
While that may be intentional (e.g. network filesystems might just
defer setgid stripping to a server) it is often just a security
issue.
Note that mandating the use of inode_init_owner() was proposed as
an alternative solution but that wouldn't fix the ordering issues
and there are examples such as afs where the use of
inode_init_owner() isn't possible.
In any case, we should also try the cleaner and generalized
solution first before resorting to this approach.
- We still have S_ISGID inheritance bugs years after the initial
round of S_ISGID inheritance fixes:
e014f37db1a2 ("xfs: use setattr_copy to set vfs inode attributes")
01ea173e103e ("xfs: fix up non-directory creation in SGID directories")
fd84bfdddd16 ("ceph: fix up non-directory creation in SGID directories")
All of this led us to conclude that the current state is too messy.
While we won't be able to make it completely clean as
posix_acl_create() is still a filesystem specific call we can improve
the S_SIGD stripping situation quite a bit by hoisting it out of
inode_init_owner() and into the respective vfs creation operations.
The obvious advantage is that we don't need to rely on individual
filesystems getting S_ISGID stripping right and instead can
standardize the ordering between S_ISGID and umask stripping directly
in the VFS.
A few short implementation notes:
- The stripping logic needs to happen in vfs_*() helpers for the sake
of stacking filesystems such as overlayfs that rely on these
helpers taking care of S_ISGID stripping.
- Security hooks have never seen the mode as it is ultimately seen by
the filesystem because of the ordering issue we mentioned. Nothing
is changed for them. We simply continue to strip the umask before
passing the mode down to the security hooks.
- The following filesystems use inode_init_owner() and thus relied on
S_ISGID stripping: spufs, 9p, bfs, btrfs, ext2, ext4, f2fs,
hfsplus, hugetlbfs, jfs, minix, nilfs2, ntfs3, ocfs2, omfs,
overlayfs, ramfs, reiserfs, sysv, ubifs, udf, ufs, xfs, zonefs,
bpf, tmpfs.
We've audited all callchains as best as we could. More details can
be found in the commit message to 1639a49ccdce ("fs: move S_ISGID
stripping into the vfs_*() helpers")"
* tag 'fs.setgid.v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
ceph: rely on vfs for setgid stripping
fs: move S_ISGID stripping into the vfs_*() helpers
fs: Add missing umask strip in vfs_tmpfile
fs: add mode_strip_sgid() helper
|
|
Most of the users immediately follow successful iov_iter_get_pages()
with advancing by the amount it had returned.
Provide inline wrappers doing that, convert trivial open-coded
uses of those.
BTW, iov_iter_get_pages() never returns more than it had been asked
to; such checks in cifs ought to be removed someday...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.
We are going to expose the things like ->write_iter() et.al. to those
in subsequent commits.
New predicate (user_backed_iter()) that is true for ITER_IOVEC and
ITER_UBUF; places like direct-IO handling should use that for
checking that pages we modify after getting them from iov_iter_get_pages()
would need to be dirtied.
DO NOT assume that replacing iter_is_iovec() with user_backed_iter()
will solve all problems - there's code that uses iter_is_iovec() to
decide how to poke around in iov_iter guts and for that the predicate
replacement obviously won't suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This function always returns 0, and ignores the nofail boolean. Drop the
nofail argument, make the function void return and fix up the callers.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Clear O_TRUNC from the flags sent in the MDS create request.
`atomic_open' is called before permission check. We should not do any
modification to the file here. The caller will do the truncation
afterward.
Fixes: 124e68e74099 ("ceph: file operations")
Signed-off-by: Hu Weiwen <sehuww@mail.scut.edu.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When the quota is approaching we need to notify it to the MDS as
soon as possible, or the client could write to the directory more
than expected.
This will flush the dirty caps without delaying after each write,
though this couldn't prevent the real size of a directory exceed
the quota but could prevent it as soon as possible.
Link: https://tracker.ceph.com/issues/56180
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
If the 'i_inline_version' is 1, that means the file is just new
created and there shouldn't have any inline data in it, we should
skip retrieving the inline data from MDS.
This also could help reduce possiblity of dead lock issue introduce
by the inline data and Fcr caps.
Gradually we will remove the inline feature from kclient after ceph's
scrub too have support to unline the inline data, currently this
could help reduce the teuthology test failures.
This is possiblly could also fix a bug that for some old clients if
they couldn't explictly uninline the inline data when writing, the
inline version will keep as 1 always. We may always reading non-exist
data from inline data.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
For async create we will always try to choose the auth MDS of frag
the dentry belonged to of the parent directory to send the request
and ususally this works fine, but if the MDS migrated the directory
to another MDS before it could be handled the request will be
forwarded. And then the auth cap will be changed.
We need to update the auth cap in this case before the request is
forwarded.
Link: https://tracker.ceph.com/issues/55857
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
There's no reason we need to lock the inode for write in order to handle
an llseek. I suspect this should have been dropped in 2013 when we
stopped doing vmtruncate in llseek.
With that gone, ceph_llseek is functionally equivalent to
generic_file_llseek, so just call that after getting the size.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In async unlink case the kclient won't wait for the first reply
from MDS and just drop all the links and unhash the dentry and then
succeeds immediately.
For any new create/link/rename,etc requests followed by using the
same file names we must wait for the first reply of the inflight
unlink request, or the MDS possibly will fail these following
requests with -EEXIST if the inflight async unlink request was
delayed for some reasons.
And the worst case is that for the none async openc request it will
successfully open the file if the CDentry hasn't been unlinked yet,
but later the previous delayed async unlink request will remove the
CDenty. That means the just created file is possiblly deleted later
by accident.
We need to wait for the inflight async unlink requests to finish
when creating new files/directories by using the same file names.
Link: https://tracker.ceph.com/issues/55332
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Now that we finished moving setgid stripping for regular files in setgid
directories into the vfs, individual filesystem don't need to manually
strip the setgid bit anymore. Drop the now unneeded code from ceph.
Link: https://lore.kernel.org/r/1657779088-2242-4-git-send-email-xuyang2018.jy@fujitsu.com
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christian Brauner (Microsoft)<brauner@kernel.org>
Reviewed-and-Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
While randstruct was satisfied with using an open-coded "void *" offset
cast for the netfs_i_context <-> inode casting, __builtin_object_size() as
used by FORTIFY_SOURCE was not as easily fooled. This was causing the
following complaint[1] from gcc v12:
In file included from include/linux/string.h:253,
from include/linux/ceph/ceph_debug.h:7,
from fs/ceph/inode.c:2:
In function 'fortify_memset_chk',
inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2,
inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2:
include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
242 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by embedding a struct inode into struct netfs_i_context (which
should perhaps be renamed to struct netfs_inode). The struct inode
vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode
structs and vfs_inode is then simply changed to "netfs.inode" in those
filesystems.
Further, rename netfs_i_context to netfs_inode, get rid of the
netfs_inode() function that converted a netfs_i_context pointer to an
inode pointer (that can now be done with &ctx->inode) and rename the
netfs_i_context() function to netfs_inode() (which is now a wrapper
around container_of()).
Most of the changes were done with:
perl -p -i -e 's/vfs_inode/netfs.inode/'g \
`git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]`
Kees suggested doing it with a pair structure[2] and a special
declarator to insert that into the network filesystem's inode
wrapper[3], but I think it's cleaner to embed it - and then it doesn't
matter if struct randomisation reorders things.
Dave Chinner suggested using a filesystem-specific VFS_I() function in
each filesystem to convert that filesystem's own inode wrapper struct
into the VFS inode struct[4].
Version #2:
- Fix a couple of missed name changes due to a disabled cifs option.
- Rename nfs_i_context to nfs_inode
- Use "netfs" instead of "nic" as the member name in per-fs inode wrapper
structs.
[ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily
disable '-Wattribute-warning' for now") that is no longer needed ]
Fixes: bc899ee1c898 ("netfs: Add a netfs inode context")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
cc: Jonathan Corbet <corbet@lwn.net>
cc: Eric Van Hensbergen <ericvh@gmail.com>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Steve French <smfrench@gmail.com>
cc: William Kucharski <william.kucharski@oracle.com>
cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
cc: Dave Chinner <david@fromorbit.com>
cc: linux-doc@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: samba-technical@lists.samba.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1]
Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2]
Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3]
Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4]
Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently when we create a file, we spin up an xattr buffer to send
along with the create request. If we end up doing an async create
however, then we currently pass down a zero-length xattr buffer.
Fix the code to send down the xattr buffer in req->r_pagelist. If the
xattrs span more than a page, however give up and don't try to do an
async create.
Cc: stable@vger.kernel.org
URL: https://bugzilla.redhat.com/show_bug.cgi?id=2063929
Fixes: 9a8d03ca2e2c ("ceph: attempt to do async create when possible")
Reported-by: John Fortin <fortinj66@gmail.com>
Reported-by: Sri Ramanujam <sri@ramanujam.io>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
We can extract both the file pointer and the pos from the iocb.
This simplifies each caller as well as allowing generic_perform_write()
to see more of the iocb contents in the future.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
|