summaryrefslogtreecommitdiff
path: root/fs/exec.c
AgeCommit message (Collapse)AuthorFilesLines
2022-12-13Merge tag 'fs.vfsuid.conversion.v6.2' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping Pull vfsuid updates from Christian Brauner: "Last cycle we introduced the vfs{g,u}id_t types and associated helpers to gain type safety when dealing with idmapped mounts. That initial work already converted a lot of places over but there were still some left, This converts all remaining places that still make use of non-type safe idmapping helpers to rely on the new type safe vfs{g,u}id based helpers. Afterwards it removes all the old non-type safe helpers" * tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: fs: remove unused idmapping helpers ovl: port to vfs{g,u}id_t and associated helpers fuse: port to vfs{g,u}id_t and associated helpers ima: use type safe idmapping helpers apparmor: use type safe idmapping helpers caps: use type safe idmapping helpers fs: use type safe idmapping helpers mnt_idmapping: add missing helpers
2022-12-12Merge tag 'execve-v6.2-rc1' of ↵Linus Torvalds1-10/+24
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: "Most are small refactorings and bug fixes, but three things stand out: switching timens (which got reverted before) looks solid now, FOLL_FORCE has been removed (no failures seen yet across several weeks in -next), and some whitespace cleanups (which are long overdue). - Add timens support (when switching mm). This version has survived in -next for the entire cycle (Andrei Vagin) - Various small bug fixes, refactoring, and readability improvements (Bernd Edlinger, Rolf Eike Beer, Bo Liu, Li Zetao Liu Shixin) - Remove FOLL_FORCE for stack setup (Kees Cook) - Whitespace cleanups (Rolf Eike Beer, Kees Cook)" * tag 'execve-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_misc: fix shift-out-of-bounds in check_special_flags binfmt: Fix error return code in load_elf_fdpic_binary() exec: Remove FOLL_FORCE for stack setup binfmt_elf: replace IS_ERR() with IS_ERR_VALUE() binfmt_elf: simplify error handling in load_elf_phdrs() binfmt_elf: fix documented return value for load_elf_phdrs() exec: simplify initial stack size expansion binfmt: Fix whitespace issues exec: Add comments on check_unsafe_exec() fs counting ELF uapi: add spaces before '{' selftests/timens: add a test for vfork+exit fs/exec: switch timens when a task gets a new mm
2022-11-18exec: Remove FOLL_FORCE for stack setupKees Cook1-1/+1
It does not appear that FOLL_FORCE should be needed for setting up the stack pages. They are allocated using the nascent brpm->vma, which was newly created with VM_STACK_FLAGS, which an arch can override, but they all appear to include VM_WRITE | VM_MAYWRITE. Remove FOLL_FORCE. Cc: Eric Biederman <ebiederm@xmission.com> Cc: David Hildenbrand <david@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Link: https://lore.kernel.org/lkml/202211171439.CDE720EAD@keescook/ Signed-off-by: Kees Cook <keescook@chromium.org>
2022-10-30Merge tag 'mm-hotfixes-stable-2022-10-28' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc hotfixes from Andrew Morton: "Eight fix pre-6.0 bugs and the remainder address issues which were introduced in the 6.1-rc merge cycle, or address issues which aren't considered sufficiently serious to warrant a -stable backport" * tag 'mm-hotfixes-stable-2022-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits) mm: multi-gen LRU: move lru_gen_add_mm() out of IRQ-off region lib: maple_tree: remove unneeded initialization in mtree_range_walk() mmap: fix remap_file_pages() regression mm/shmem: ensure proper fallback if page faults mm/userfaultfd: replace kmap/kmap_atomic() with kmap_local_page() x86: fortify: kmsan: fix KMSAN fortify builds x86: asm: make sure __put_user_size() evaluates pointer once Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default x86/purgatory: disable KMSAN instrumentation mm: kmsan: export kmsan_copy_page_meta() mm: migrate: fix return value if all subpages of THPs are migrated successfully mm/uffd: fix vma check on userfault for wp mm: prep_compound_tail() clear page->private mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs mm/page_isolation: fix clang deadcode warning fs/ext4/super.c: remove unused `deprecated_msg' ipc/msg.c: fix percpu_counter use after free memory tier, sysfs: rename attribute "nodes" to "nodelist" MAINTAINERS: git://github.com -> https://github.com for nilfs2 mm/kmemleak: prevent soft lockup in kmemleak_scan()'s object iteration loops ...
2022-10-28mm: multi-gen LRU: move lru_gen_add_mm() out of IRQ-off regionSebastian Andrzej Siewior1-1/+1
lru_gen_add_mm() has been added within an IRQ-off region in the commit mentioned below. The other invocations of lru_gen_add_mm() are not within an IRQ-off region. The invocation within IRQ-off region is problematic on PREEMPT_RT because the function is using a spin_lock_t which must not be used within IRQ-disabled regions. The other invocations of lru_gen_add_mm() occur while task_struct::alloc_lock is acquired. Move lru_gen_add_mm() after interrupts are enabled and before task_unlock(). Link: https://lkml.kernel.org/r/20221026134830.711887-1-bigeasy@linutronix.de Fixes: bd74fdaea1460 ("mm: multi-gen LRU: support page table walks") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Yu Zhao <yuzhao@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-26fs: use type safe idmapping helpersChristian Brauner1-8/+8
We already ported most parts and filesystems over for v6.0 to the new vfs{g,u}id_t type and associated helpers for v6.0. Convert the remaining places so we can remove all the old helpers. This is a non-functional change. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26exec: simplify initial stack size expansionRolf Eike Beer1-8/+5
I had a hard time trying to understand completely why it is using vm_end in one side of the expression and vm_start in the other one, and using something in the "if" clause that is not an exact copy of what is used below. The whole point is that the stack_size variable that was used in the "if" clause is the difference between vm_start and vm_end, which is not far away but makes this thing harder to read than it must be. Signed-off-by: Rolf Eike Beer <eb@emlix.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/2017429.gqNitNVd0C@mobilepool36.emlix.com
2022-10-26binfmt: Fix whitespace issuesKees Cook1-1/+1
Fix the annoying whitespace issues that have been following these files around for years. Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Link: https://lore.kernel.org/r/20221018071350.never.230-kees@kernel.org
2022-10-26exec: Add comments on check_unsafe_exec() fs countingKees Cook1-0/+12
Add some comments about what the fs counting is doing in check_unsafe_exec() and how it relates to the call graph. Specifically, we can't force an unshare of the fs because of at least Chrome: https://lore.kernel.org/lkml/86CE201B-5632-4BB7-BCF6-7CB2C2895409@chromium.org/ Cc: Eric Biederman <ebiederm@xmission.com> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Link: https://lore.kernel.org/r/20221018071537.never.662-kees@kernel.org
2022-10-26fs/exec: switch timens when a task gets a new mmAndrei Vagin1-0/+5
Changing a time namespace requires remapping a vvar page, so we don't want to allow doing that if any other tasks can use the same mm. Currently, we install a time namespace when a task is created with a new vm. exec() is another case when a task gets a new mm and so it can switch a time namespace safely, but it isn't handled now. One more issue of the current interface is that clone() with CLONE_VM isn't allowed if the current task has unshared a time namespace (timens_for_children doesn't match the current timens). Both these issues make some inconvenience for users. For example, Alexey and Florian reported that posix_spawn() uses vfork+exec and this pattern doesn't work with time namespaces due to the both described issues. LXC needed to workaround the exec() issue by calling setns. In the commit 133e2d3e81de5 ("fs/exec: allow to unshare a time namespace on vfork+exec"), we tried to fix these issues with minimal impact on UAPI. But it adds extra complexity and some undesirable side effects. Eric suggested fixing the issues properly because here are all the reasons to suppose that there are no users that depend on the old behavior. Cc: Alexey Izbyshev <izbyshev@ispras.ru> Cc: Christian Brauner <brauner@kernel.org> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Kees Cook <keescook@chromium.org> Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com> Origin-author: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220921003120.209637-1-avagin@google.com
2022-10-26exec: Copy oldsighand->action under spin-lockBernd Edlinger1-2/+2
unshare_sighand should only access oldsighand->action while holding oldsighand->siglock, to make sure that newsighand->action is in a consistent state. Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/AM8PR10MB470871DEBD1DED081F9CC391E4389@AM8PR10MB4708.EURPRD10.PROD.OUTLOOK.COM
2022-10-11Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-10Merge tag 'ucount-rlimits-cleanups-for-v5.19' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ucounts update from Eric Biederman: "Split rlimit and ucount values and max values After the ucount rlimit code was merged a bunch of small but siginificant bugs were found and fixed. At the time it was realized that part of the problem was that while the ucount rlimits were very similar to the oridinary ucounts (in being nested counts with limits) the semantics were slightly different and the code would be less error prone if there was less sharing. This is the long awaited cleanup that should hopefully keep things more comprehensible and less error prone for whoever needs to touch that code next" * tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: Split rlimit and ucount values and max values
2022-10-07Merge tag 'pull-file_inode' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull file_inode() updates from Al Vrio: "whack-a-mole: cropped up open-coded file_inode() uses..." * tag 'pull-file_inode' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: orangefs: use ->f_mapping _nfs42_proc_copy(): use ->f_mapping instead of file_inode()->i_mapping dma_buf: no need to bother with file_inode()->i_mapping nfs_finish_open(): don't open-code file_inode() bprm_fill_uid(): don't open-code file_inode() sgx: use ->f_mapping... exfat_iterate(): don't open-code file_inode(file) ibmvmc: don't open-code file_inode()
2022-09-27a.out: Remove the a.out implementationEric W. Biederman1-2/+1
In commit 19e8b701e258 ("a.out: Stop building a.out/osf1 support on alpha and m68k") the last users of a.out were disabled. As nothing has turned up to cause this change to be reverted, let's remove the code implementing a.out support as well. There may be userspace users of the uapi bits left so the uapi headers have been left untouched. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Arnd Bergmann <arnd@arndb.de> # arm defconfigs Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/871qrx3hq3.fsf@email.froward.int.ebiederm.org
2022-09-27exec: use VMA iterator instead of linked listMatthew Wilcox (Oracle)1-3/+6
Remove a use of the vm_next list by doing the initial lookup with the VMA iterator and then using it to find the next entry. Link: https://lkml.kernel.org/r/20220906194824.2110408-42-Liam.Howlett@oracle.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-27mm: remove vmacacheLiam R. Howlett1-3/+0
By using the maple tree and the maple tree state, the vmacache is no longer beneficial and is complicating the VMA code. Remove the vmacache to reduce the work in keeping it up to date and code complexity. Link: https://lkml.kernel.org/r/20220906194824.2110408-26-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-27mm: multi-gen LRU: support page table walksYu Zhao1-0/+2
To further exploit spatial locality, the aging prefers to walk page tables to search for young PTEs and promote hot pages. A kill switch will be added in the next patch to disable this behavior. When disabled, the aging relies on the rmap only. NB: this behavior has nothing similar with the page table scanning in the 2.4 kernel [1], which searches page tables for old PTEs, adds cold pages to swapcache and unmaps them. To avoid confusion, the term "iteration" specifically means the traversal of an entire mm_struct list; the term "walk" will be applied to page tables and the rmap, as usual. An mm_struct list is maintained for each memcg, and an mm_struct follows its owner task to the new memcg when this task is migrated. Given an lruvec, the aging iterates lruvec_memcg()->mm_list and calls walk_page_range() with each mm_struct on this list to promote hot pages before it increments max_seq. When multiple page table walkers iterate the same list, each of them gets a unique mm_struct; therefore they can run concurrently. Page table walkers ignore any misplaced pages, e.g., if an mm_struct was migrated, pages it left in the previous memcg will not be promoted when its current memcg is under reclaim. Similarly, page table walkers will not promote pages from nodes other than the one under reclaim. This patch uses the following optimizations when walking page tables: 1. It tracks the usage of mm_struct's between context switches so that page table walkers can skip processes that have been sleeping since the last iteration. 2. It uses generational Bloom filters to record populated branches so that page table walkers can reduce their search space based on the query results, e.g., to skip page tables containing mostly holes or misplaced pages. 3. It takes advantage of the accessed bit in non-leaf PMD entries when CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y. 4. It does not zigzag between a PGD table and the same PMD table spanning multiple VMAs. IOW, it finishes all the VMAs within the range of the same PMD table before it returns to a PGD table. This improves the cache performance for workloads that have large numbers of tiny VMAs [2], especially when CONFIG_PGTABLE_LEVELS=5. Server benchmark results: Single workload: fio (buffered I/O): no change Single workload: memcached (anon): +[8, 10]% Ops/sec KB/sec patch1-7: 1147696.57 44640.29 patch1-8: 1245274.91 48435.66 Configurations: no change Client benchmark results: kswapd profiles: patch1-7 48.16% lzo1x_1_do_compress (real work) 8.20% page_vma_mapped_walk (overhead) 7.06% _raw_spin_unlock_irq 2.92% ptep_clear_flush 2.53% __zram_bvec_write 2.11% do_raw_spin_lock 2.02% memmove 1.93% lru_gen_look_around 1.56% free_unref_page_list 1.40% memset patch1-8 49.44% lzo1x_1_do_compress (real work) 6.19% page_vma_mapped_walk (overhead) 5.97% _raw_spin_unlock_irq 3.13% get_pfn_folio 2.85% ptep_clear_flush 2.42% __zram_bvec_write 2.08% do_raw_spin_lock 1.92% memmove 1.44% alloc_zspage 1.36% memset Configurations: no change Thanks to the following developers for their efforts [3]. kernel test robot <lkp@intel.com> [1] https://lwn.net/Articles/23732/ [2] https://llvm.org/docs/ScudoHardenedAllocator.html [3] https://lore.kernel.org/r/202204160827.ekEARWQo-lkp@intel.com/ Link: https://lkml.kernel.org/r/20220918080010.2920238-9-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Barry Song <baohua@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-13Revert "fs/exec: allow to unshare a time namespace on vfork+exec"Andrei Vagin1-7/+0
This reverts commit 133e2d3e81de5d9706cab2dd1d52d231c27382e5. Alexey pointed out a few undesirable side effects of the reverted change. First, it doesn't take into account that CLONE_VFORK can be used with CLONE_THREAD. Second, a child process doesn't enter a target time name-space, if its parent dies before the child calls exec. It happens because the parent clears vfork_done. Eric W. Biederman suggests installing a time namespace as a task gets a new mm. It includes all new processes cloned without CLONE_VM and all tasks that call exec(). This is an user API change, but we think there aren't users that depend on the old behavior. It is too late to make such changes in this release, so let's roll back this patch and introduce the right one in the next release. Cc: Alexey Izbyshev <izbyshev@ispras.ru> Cc: Christian Brauner <brauner@kernel.org> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220913102551.1121611-3-avagin@google.com
2022-09-02bprm_fill_uid(): don't open-code file_inode()Al Viro1-2/+1
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-08-20Merge tag 'execve-v6.0-rc2' of ↵Linus Torvalds1-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve fix from Kees Cook: - Replace remaining kmap() uses with kmap_local_page() (Fabio M. De Francesco) * tag 'execve-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: exec: Replace kmap{,_atomic}() with kmap_local_page()
2022-08-16exec: Replace kmap{,_atomic}() with kmap_local_page()Fabio M. De Francesco1-7/+7
The use of kmap() and kmap_atomic() are being deprecated in favor of kmap_local_page(). There are two main problems with kmap(): (1) It comes with an overhead as mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore, the tasks can be preempted and, when they are scheduled to run again, the kernel virtual addresses are restored and are still valid. Since the use of kmap_local_page() in exec.c is safe, it should be preferred everywhere in exec.c. As said, since kmap_local_page() can be also called from atomic context, and since remove_arg_zero() doesn't (and shouldn't ever) rely on an implicit preempt_disable(), this function can also safely replace kmap_atomic(). Therefore, replace kmap() and kmap_atomic() with kmap_local_page() in fs/exec.c. Tested with xfstests on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with HIGHMEM64GB enabled. Cc: Eric W. Biederman <ebiederm@xmission.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220803182856.28246-1-fmdefrancesco@gmail.com
2022-08-09posix-cpu-timers: Cleanup CPU timers before freeing them during execThadeu Lima de Souza Cascardo1-0/+3
Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a task") started looking up tasks by PID when deleting a CPU timer. When a non-leader thread calls execve, it will switch PIDs with the leader process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find the task because the timer still points out to the old PID. That means that armed timers won't be disarmed, that is, they won't be removed from the timerqueue_list. exit_itimers will still release their memory, and when that list is later processed, it leads to a use-after-free. Clean up the timers from the de-threaded task before freeing them. This prevents a reported use-after-free. Fixes: 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a task") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220809170751.164716-1-cascardo@canonical.com
2022-08-03Merge tag 'execve-v5.20-rc1' of ↵Linus Torvalds1-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - Allow unsharing time namespace on vfork+exec (Andrei Vagin) - Replace usage of deprecated kmap APIs (Fabio M. De Francesco) - Fix spelling mistake (Zhang Jiaming) * tag 'execve-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: exec: Call kmap_local_page() in copy_string_kernel() exec: Fix a spelling mistake selftests/timens: add a test for vfork+exit fs/exec: allow to unshare a time namespace on vfork+exec
2022-07-28exec: Call kmap_local_page() in copy_string_kernel()Fabio M. De Francesco1-5/+1
The use of kmap_atomic() is being deprecated in favor of kmap_local_page(). With kmap_local_page(), the mappings are per thread, CPU local and not globally visible. Furthermore, the mappings can be acquired from any context (including interrupts). Therefore, replace kmap_atomic() with kmap_local_page() in copy_string_kernel(). Instead of open-coding local mapping + memcpy(), use memcpy_to_page(). Delete a redundant call to flush_dcache_page(). Tested with xfstests on a QEMU/ KVM x86_32 VM, 6GB RAM, booting a kernel with HIGHMEM64GB enabled. Suggested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220724212523.13317-1-fmdefrancesco@gmail.com
2022-07-11fix race between exit_itimers() and /proc/pid/timersOleg Nesterov1-1/+1
As Chris explains, the comment above exit_itimers() is not correct, we can race with proc_timers_seq_ops. Change exit_itimers() to clear signal->posix_timers with ->siglock held. Cc: <stable@vger.kernel.org> Reported-by: chris@accessvector.net Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-02exec: Fix a spelling mistakeZhang Jiaming1-1/+1
Change 'wont't' to 'won't'. Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Reviewed-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220629072932.27506-1-jiaming@nfschina.com
2022-06-15fs/exec: allow to unshare a time namespace on vfork+execAndrei Vagin1-0/+7
Right now, a new process can't be forked in another time namespace if it shares mm with its parent. It is prohibited, because each time namespace has its own vvar page that is mapped into a process address space. When a process calls exec, it gets a new mm and so it could be "legal" to switch time namespace in that case. This was not implemented and now if we want to do this, we need to add another clone flag to not break backward compatibility. We don't have any user requests to switch times on exec except the vfork+exec combination, so there is no reason to add a new clone flag. As for vfork+exec, this should be safe to allow switching timens with the current clone flag. Right now, vfork (CLONE_VFORK | CLONE_VM) fails if a child is forked into another time namespace. With this change, vfork creates a new process in parent's timens, and the following exec does the actual switch to the target time namespace. Suggested-by: Florian Weimer <fweimer@redhat.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220613060723.197407-1-avagin@gmail.com
2022-06-04Merge tag 'kthread-cleanups-for-v5.19' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull kthread updates from Eric Biederman: "This updates init and user mode helper tasks to be ordinary user mode tasks. Commit 40966e316f86 ("kthread: Ensure struct kthread is present for all kthreads") caused init and the user mode helper threads that call kernel_execve to have struct kthread allocated for them. This struct kthread going away during execve in turned made a use after free of struct kthread possible. Here, commit 343f4c49f243 ("kthread: Don't allocate kthread_struct for init and umh") is enough to fix the use after free and is simple enough to be backportable. The rest of the changes pass struct kernel_clone_args to clean things up and cause the code to make sense. In making init and the user mode helpers tasks purely user mode tasks I ran into two complications. The function task_tick_numa was detecting tasks without an mm by testing for the presence of PF_KTHREAD. The initramfs code in populate_initrd_image was using flush_delayed_fput to ensuere the closing of all it's file descriptors was complete, and flush_delayed_fput does not work in a userspace thread. I have looked and looked and more complications and in my code review I have not found any, and neither has anyone else with the code sitting in linux-next" * tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sched: Update task_tick_numa to ignore tasks without an mm fork: Stop allowing kthreads to call execve fork: Explicitly set PF_KTHREAD init: Deal with the init process being a user mode process fork: Generalize PF_IO_WORKER handling fork: Explicity test for idle tasks in copy_thread fork: Pass struct kernel_clone_args into copy_thread kthread: Don't allocate kthread_struct for init and umh
2022-05-19ucounts: Split rlimit and ucount values and max valuesAlexey Gladkov1-1/+1
Since the semantics of maximum rlimit values are different, it would be better not to mix ucount and rlimit values. This will prevent the error of using inc_count/dec_ucount for rlimit parameters. This patch also renames the functions to emphasize the lack of connection between rlimit and ucount. v3: - Fix BUG:KASAN:use-after-free_in_dec_ucount. v2: - Fix the array-index-out-of-bounds that was found by the lkp project. Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Alexey Gladkov <legion@kernel.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Link: https://lkml.kernel.org/r/20220518171730.l65lmnnjtnxnftpq@example.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2022-05-13mm/mprotect: use mmu_gatherNadav Amit1-1/+5
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-07fork: Stop allowing kthreads to call execveEric W. Biederman1-3/+3
Now that kernel_execve is no longer called from kernel threads stop supporting kernel threads calling kernel_execve. Remove the code for converting a kthread to a normal thread in execve. Document the restriction that kthreads may not call kernel_execve by having kernel_execve fail if called by a kthread. Link: https://lkml.kernel.org/r/20220506141512.516114-7-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-05-06kthread: Don't allocate kthread_struct for init and umhEric W. Biederman1-2/+4
If kthread_is_per_cpu runs concurrently with free_kthread_struct the kthread_struct that was just freed may be read from. This bug was introduced by commit 40966e316f86 ("kthread: Ensure struct kthread is present for all kthreads"). When kthread_struct started to be allocated for all tasks that have PF_KTHREAD set. This in turn required the kthread_struct to be freed in kernel_execve and violated the assumption that kthread_struct will have the same lifetime as the task. Looking a bit deeper this only applies to callers of kernel_execve which is just the init process and the user mode helper processes. These processes really don't want to be kernel threads but are for historical reasons. Mostly that copy_thread does not know how to take a kernel mode function to the process with for processes without PF_KTHREAD or PF_IO_WORKER set. Solve this by not allocating kthread_struct for the init process and the user mode helper processes. This is done by adding a kthread member to struct kernel_clone_args. Setting kthread in fork_idle and kernel_thread. Adding user_mode_thread that works like kernel_thread except it does not set kthread. In fork only allocating the kthread_struct if .kthread is set. I have looked at kernel/kthread.c and since commit 40966e316f86 ("kthread: Ensure struct kthread is present for all kthreads") there have been no assumptions added that to_kthread or __to_kthread will not return NULL. There are a few callers of to_kthread or __to_kthread that assume a non-NULL struct kthread pointer will be returned. These functions are kthread_data(), kthread_parmme(), kthread_exit(), kthread(), kthread_park(), kthread_unpark(), kthread_stop(). All of those functions can reasonably expected to be called when it is know that a task is a kthread so that assumption seems reasonable. Cc: stable@vger.kernel.org Fixes: 40966e316f86 ("kthread: Ensure struct kthread is present for all kthreads") Reported-by: Максим Кутявин <maximkabox13@gmail.com> Link: https://lkml.kernel.org/r/20220506141512.516114-1-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-03-29Merge tag 'ptrace-cleanups-for-v5.18' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace cleanups from Eric Biederman: "This set of changes removes tracehook.h, moves modification of all of the ptrace fields inside of siglock to remove races, adds a missing permission check to ptrace.c The removal of tracehook.h is quite significant as it has been a major source of confusion in recent years. Much of that confusion was around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the semantics clearer). For people who don't know tracehook.h is a vestiage of an attempt to implement uprobes like functionality that was never fully merged, and was later superseeded by uprobes when uprobes was merged. For many years now we have been removing what tracehook functionaly a little bit at a time. To the point where anything left in tracehook.h was some weird strange thing that was difficult to understand" * tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: Remove duplicated include in ptrace.c ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE ptrace: Return the signal to continue with from ptrace_stop ptrace: Move setting/clearing ptrace_message into ptrace_stop tracehook: Remove tracehook.h resume_user_mode: Move to resume_user_mode.h resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume signal: Move set_notify_signal and clear_notify_signal into sched/signal.h task_work: Decouple TIF_NOTIFY_SIGNAL and task_work task_work: Call tracehook_notify_signal from get_signal on all architectures task_work: Introduce task_work_pending task_work: Remove unnecessary include from posix_timers.h ptrace: Remove tracehook_signal_handler ptrace: Remove arch_syscall_{enter,exit}_tracehook ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h ptrace/arm: Rename tracehook_report_syscall report_syscall ptrace: Move ptrace_report_syscall into ptrace.h
2022-03-24Merge tag 'asm-generic-5.18' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three sets of updates for 5.18 in the asm-generic tree: - The set_fs()/get_fs() infrastructure gets removed for good. This was already gone from all major architectures, but now we can finally remove it everywhere, which loses some particularly tricky and error-prone code. There is a small merge conflict against a parisc cleanup, the solution is to use their new version. - The nds32 architecture ends its tenure in the Linux kernel. The hardware is still used and the code is in reasonable shape, but the mainline port is not actively maintained any more, as all remaining users are thought to run vendor kernels that would never be updated to a future release. - A series from Masahiro Yamada cleans up some of the uapi header files to pass the compile-time checks" * tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits) nds32: Remove the architecture uaccess: remove CONFIG_SET_FS ia64: remove CONFIG_SET_FS support sh: remove CONFIG_SET_FS support sparc64: remove CONFIG_SET_FS support lib/test_lockup: fix kernel pointer check for separate address spaces uaccess: generalize access_ok() uaccess: fix type mismatch warnings from access_ok() arm64: simplify access_ok() m68k: fix access_ok for coldfire MIPS: use simpler access_ok() MIPS: Handle address errors for accesses above CPU max virtual user address uaccess: add generic __{get,put}_kernel_nofault nios2: drop access_ok() check from __put_user() x86: use more conventional access_ok() definition x86: remove __range_not_ok() sparc64: add __{get,put}_kernel_nofault() nds32: fix access_ok() checks in get/put_user uaccess: fix nios2 and microblaze get_user_8() sparc64: fix building assembly files ...
2022-03-11tracehook: Remove tracehook.hEric W. Biederman1-1/+0
Now that all of the definitions have moved out of tracehook.h into ptrace.h, sched/signal.h, resume_user_mode.h there is nothing left in tracehook.h so remove it. Update the few files that were depending upon tracehook.h to bring in definitions to use the headers they need directly. Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20220309162454.123006-13-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-03-02exec: cleanup commentsTom Rix1-3/+3
Remove the second 'from'. Replace 'backwords' with 'backwards'. Replace 'visibile' with 'visible'. Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220211160940.2516243-1-trix@redhat.com
2022-03-02exec: Force single empty string when argv is emptyKees Cook1-1/+25
Quoting[1] Ariadne Conill: "In several other operating systems, it is a hard requirement that the second argument to execve(2) be the name of a program, thus prohibiting a scenario where argc < 1. POSIX 2017 also recommends this behaviour, but it is not an explicit requirement[2]: The argument arg0 should point to a filename string that is associated with the process being started by one of the exec functions. ... Interestingly, Michael Kerrisk opened an issue about this in 2008[3], but there was no consensus to support fixing this issue then. Hopefully now that CVE-2021-4034 shows practical exploitative use[4] of this bug in a shellcode, we can reconsider. This issue is being tracked in the KSPP issue tracker[5]." While the initial code searches[6][7] turned up what appeared to be mostly corner case tests, trying to that just reject argv == NULL (or an immediately terminated pointer list) quickly started tripping[8] existing userspace programs. The next best approach is forcing a single empty string into argv and adjusting argc to match. The number of programs depending on argc == 0 seems a smaller set than those calling execve with a NULL argv. Account for the additional stack space in bprm_stack_limits(). Inject an empty string when argc == 0 (and set argc = 1). Warn about the case so userspace has some notice about the change: process './argc0' launched './argc0' with NULL argv: empty string added Additionally WARN() and reject NULL argv usage for kernel threads. [1] https://lore.kernel.org/lkml/20220127000724.15106-1-ariadne@dereferenced.org/ [2] https://pubs.opengroup.org/onlinepubs/9699919799/functions/exec.html [3] https://bugzilla.kernel.org/show_bug.cgi?id=8408 [4] https://www.qualys.com/2022/01/25/cve-2021-4034/pwnkit.txt [5] https://github.com/KSPP/linux/issues/176 [6] https://codesearch.debian.net/search?q=execve%5C+*%5C%28%5B%5E%2C%5D%2B%2C+*NULL&literal=0 [7] https://codesearch.debian.net/search?q=execlp%3F%5Cs*%5C%28%5B%5E%2C%5D%2B%2C%5Cs*NULL&literal=0 [8] https://lore.kernel.org/lkml/20220131144352.GE16385@xsang-OptiPlex-9020/ Reported-by: Ariadne Conill <ariadne@dereferenced.org> Reported-by: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Ariadne Conill <ariadne@dereferenced.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220201000947.2453721-1-keescook@chromium.org
2022-02-25uaccess: remove CONFIG_SET_FSArnd Bergmann1-6/+0
There are no remaining callers of set_fs(), so CONFIG_SET_FS can be removed globally, along with the thread_info field and any references to it. This turns access_ok() into a cheaper check against TASK_SIZE_MAX. As CONFIG_SET_FS is now gone, drop all remaining references to set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel(). Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic] Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-01-22fs/coredump: move coredump sysctls into its own fileXiaoming Ni1-55/+0
This moves the fs/coredump.c respective sysctls to its own file. Link: https://lkml.kernel.org/r/20211129211943.640266-6-mcgrof@kernel.org Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Stephen Kitt <steve@sk2.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22fs: move fs/exec.c sysctls into its own fileLuis Chamberlain1-0/+90
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the fs/exec.c respective sysctls to its own file. Since checkpatch complains about style issues with the old code, this move also fixes a few of those minor style issues: * Use pr_warn() instead of prink(WARNING * New empty lines are wanted at the beginning of routines Link: https://lkml.kernel.org/r/20211129205548.605569-9-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Stephen Kitt <steve@sk2.org> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-20Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+3
Merge more updates from Andrew Morton: "55 patches. Subsystems affected by this patch series: percpu, procfs, sysctl, misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2, hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits) lib: remove redundant assignment to variable ret ubsan: remove CONFIG_UBSAN_OBJECT_SIZE kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB btrfs: use generic Kconfig option for 256kB page size limit arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB configs: introduce debug.config for CI-like setup delayacct: track delays from memory compact Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact delayacct: cleanup flags in struct task_delay_info and functions use it delayacct: fix incomplete disable operation when switch enable to disable delayacct: support swapin delay accounting for swapping without blkio panic: remove oops_id panic: use error_report_end tracepoint on warnings fs/adfs: remove unneeded variable make code cleaner FAT: use io_schedule_timeout() instead of congestion_wait() hfsplus: use struct_group_attr() for memcpy() region nilfs2: remove redundant pointer sbufs fs/binfmt_elf: use PT_LOAD p_align values for static PIE const_structs.checkpatch: add frequently used ops structs ...
2022-01-20fs/exec: replace strncpy with strscpy_pad in __get_task_commYafang Shao1-1/+2
If the dest buffer size is smaller than sizeof(tsk->comm), the buffer will be without null ternimator, that may cause problem. Using strscpy_pad() instead of strncpy() in __get_task_comm() can make the string always nul ternimated and zero padded. Link: https://lkml.kernel.org/r/20211120112738.45980-3-laoar.shao@gmail.com Suggested-by: Kees Cook <keescook@chromium.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-20fs/exec: replace strlcpy with strscpy_pad in __set_task_commYafang Shao1-1/+1
Patch series "task comm cleanups", v2. This patchset is part of the patchset "extend task comm from 16 to 24"[1]. Now we have different opinion that dynamically allocates memory to store kthread's long name into a separate pointer, so I decide to take the useful cleanups apart from the original patchset and send it separately[2]. These useful cleanups can make the usage around task comm less error-prone. Furthermore, it will be useful if we want to extend task comm in the future. [1]. https://lore.kernel.org/lkml/20211101060419.4682-1-laoar.shao@gmail.com/ [2]. https://lore.kernel.org/lkml/CALOAHbAx55AUo3bm8ZepZSZnw7A08cvKPdPyNTf=E_tPqmw5hw@mail.gmail.com/ This patch (of 7): strlcpy() can trigger out-of-bound reads on the source string[1], we'd better use strscpy() instead. To make it be robust against full tsk->comm copies that got noticed in other places, we should make sure it's zero padded. [1] https://github.com/KSPP/linux/issues/89 Link: https://lkml.kernel.org/r/20211120112738.45980-1-laoar.shao@gmail.com Link: https://lkml.kernel.org/r/20211120112738.45980-2-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-08signal: Remove the helper signal_group_exitEric W. Biederman1-1/+1
This helper is misleading. It tests for an ongoing exec as well as the process having received a fatal signal. Sometimes it is appropriate to treat an on-going exec differently than a process that is shutting down due to a fatal signal. In particular taking the fast path out of exit_signals instead of retargeting signals is not appropriate during exec, and not changing the the exit code in do_group_exit during exec. Removing the helper makes it more obvious what is going on as both cases must be coded for explicitly. While removing the helper fix the two cases where I have observed using signal_group_exit resulted in the wrong result. In exit_signals only test for SIGNAL_GROUP_EXIT so that signals are retargetted during an exec. In do_group_exit use 0 as the exit code during an exec as de_thread does not set group_exit_code. As best as I can determine group_exit_code has been is set to 0 most of the time during de_thread. During a thread group stop group_exit_code is set to the stop signal and when the thread group receives SIGCONT group_exit_code is reset to 0. Link: https://lkml.kernel.org/r/20211213225350.27481-8-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-01-08signal: Rename group_exit_task group_exec_taskEric W. Biederman1-4/+4
The only remaining user of group_exit_task is exec. Rename the field so that it is clear which part of the code uses it. Update the comment above the definition of group_exec_task to document how it is currently used. Link: https://lkml.kernel.org/r/20211213225350.27481-7-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-12-13kthread: Ensure struct kthread is present for all kthreadsEric W. Biederman1-0/+2
Today the rules are a bit iffy and arbitrary about which kernel threads have struct kthread present. Both idle threads and thread started with create_kthread want struct kthread present so that is effectively all kernel threads. Make the rule that if PF_KTHREAD and the task is running then struct kthread is present. This will allow the kernel thread code to using tsk->exit_code with different semantics from ordinary processes. To make ensure that struct kthread is present for all kernel threads move it's allocation into copy_process. Add a deallocation of struct kthread in exec for processes that were kernel threads. Move the allocation of struct kthread for the initial thread earlier so that it is not repeated for each additional idle thread. Move the initialization of struct kthread into set_kthread_struct so that the structure is always and reliably initailized. Clear set_child_tid in free_kthread_struct to ensure the kthread struct is reliably freed during exec. The function free_kthread_struct does not need to clear vfork_done during exec as exec_mm_release called from exec_mmap has already cleared vfork_done. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-11-11Merge branch 'exit-cleanups-for-v5.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit cleanups from Eric Biederman: "While looking at some issues related to the exit path in the kernel I found several instances where the code is not using the existing abstractions properly. This set of changes introduces force_fatal_sig a way of sending a signal and not allowing it to be caught, and corrects the misuse of the existing abstractions that I found. A lot of the misuse of the existing abstractions are silly things such as doing something after calling a no return function, rolling BUG by hand, doing more work than necessary to terminate a kernel thread, or calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL). In the review a deficiency in force_fatal_sig and force_sig_seccomp where ptrace or sigaction could prevent the delivery of the signal was found. I have added a change that adds SA_IMMUTABLE to change that makes it impossible to interrupt the delivery of those signals, and allows backporting to fix force_sig_seccomp And Arnd found an issue where a function passed to kthread_run had the wrong prototype, and after my cleanup was failing to build." * 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits) soc: ti: fix wkup_m3_rproc_boot_thread return type signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV) exit/r8188eu: Replace the macro thread_exit with a simple return 0 exit/rtl8712: Replace the macro thread_exit with a simple return 0 exit/rtl8723bs: Replace the macro thread_exit with a simple return 0 signal/x86: In emulate_vsyscall force a signal instead of calling do_exit signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails exit/syscall_user_dispatch: Send ordinary signals on failure signal: Implement force_fatal_sig exit/kthread: Have kernel threads return instead of calling do_exit signal/s390: Use force_sigsegv in default_trap_handler signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved. signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON signal/sparc: In setup_tsb_params convert open coded BUG into BUG signal/powerpc: On swapcontext failure force SIGSEGV signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL) signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT signal/sparc32: Remove unreachable do_exit in do_sparc_fault ...
2021-10-29signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)Eric W. Biederman1-1/+1
Now that force_fatal_sig exists it is unnecessary and a bit confusing to use force_sigsegv in cases where the simpler force_fatal_sig is wanted. So change every instance we can to make the code clearer. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Link: https://lkml.kernel.org/r/877de7jrev.fsf@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-06exec: Check for a pending fatal signal instead of core_stateEric W. Biederman1-8/+6
Prevent exec continuing when a fatal signal is pending by replacing mmap_read_lock with mmap_read_lock_killable. This is always the right thing to do as userspace will never observe an exec complete when there is a fatal signal pending. With that change it becomes unnecessary to explicitly test for a core dump in progress. In coredump_wait zap_threads arranges under mmap_write_lock for all tasks that use a mm to also have SIGKILL pending, which means mmap_read_lock_killable will always return -EINTR when old_mm->core_state is present. Link: https://lkml.kernel.org/r/87fstux27w.fsf@disp2133 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>