summaryrefslogtreecommitdiff
path: root/fs/ext3/super.c
AgeCommit message (Collapse)AuthorFilesLines
2013-10-16ext3: Count journal as bsddf overhead in ext3_statfsEric Sandeen1-0/+4
ext4 counts journal space as bsddf overhead, but ext3 does not. For some reason when I patched ext4 I thought I should leave ext3 alone, but frankly it makes more sense to fix it, I think. Otherwise we get inconsistent behavior from ext3 under ext3.ko, and ext3 under ext4.ko, which is not at all desirable... This is testable by xfstests shared/289, though it will need modification because it currently special-cases ext3. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-08-01ext3: allow specifying external journal by pathname mount optionEric Sandeen1-0/+43
It's always been a hassle that if an external journal's device number changes, the filesystem won't mount. And since boot-time enumeration can change, device number changes aren't unusual. The current mechanism to update the journal location is by passing in a mount option w/ a new devnum, but that's a hassle; it's a manual approach, fixing things after the fact. Adding a mount option, "-o journal_path=/dev/$DEVICE" would help, since then we can do i.e. # mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ... and it'll mount even if the devnum has changed, as shown here: # losetup /dev/loop0 journalfile # mke2fs -L mylabel-journal -O journal_dev /dev/loop0 # mkfs.ext3 -L mylabel -J device=/dev/loop0 /dev/sdb1 Change the journal device number: # losetup -d /dev/loop0 # losetup /dev/loop1 journalfile And today it will fail: # mount /dev/sdb1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [17343.240702] EXT3-fs (sdb1): error: couldn't read superblock of external journal But with this new mount option, we can specify the new path: # mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test # (which does update the encoded device number, incidentally): # umount /dev/sdb1 # dumpe2fs -h /dev/sdb1 | grep "Journal device" dumpe2fs 1.41.12 (17-May-2010) Journal device: 0x0701 But best of all we can just always mount by journal-path, and it'll always work: # mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test # So the journal_path option can be specified in fstab, and as long as the disk is available somewhere, and findable by label (or by UUID), we can mount. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-07-04ext3: Fix fsync error handling after filesystem abort.Dmitry Monakhov1-1/+12
If filesystem was aborted we will return success due to (sb->s_flags & MS_RDONLY) which is incorrect and results in data loss. In order to handle fs abort correctly we have to check fs state once we discover that it is in MS_RDONLY state Test case: http://patchwork.ozlabs.org/patch/244297/ Changes from V1: - fix spelling - fix smp_rmb()/debug order Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2013-05-07make blkdev_put() return voidAl Viro1-7/+4
same story as with the previous patches - note that return value of blkdev_close() is lost, since there's nowhere the caller (__fput()) could return it to. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-30mm: make snapshotting pages for stable writes a per-bio operationDarrick J. Wong1-1/+0
Walking a bio's page mappings has proved problematic, so create a new bio flag to indicate that a bio's data needs to be snapshotted in order to guarantee stable pages during writeback. Next, for the one user (ext3/jbd) of snapshotting, hook all the places where writes can be initiated without PG_writeback set, and set BIO_SNAP_STABLE there. We must also flag journal "metadata" bios for stable writeout, since file data can be written through the journal. Finally, the MS_SNAP_STABLE mount flag (only used by ext3) is now superfluous, so get rid of it. [akpm@linux-foundation.org: rename _submit_bh()'s `flags' to `bio_flags', delobotomize the _submit_bh declaration] [akpm@linux-foundation.org: teeny cleanup] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12ext3: Fix format string issuesLars-Peter Clausen1-2/+2
ext3_msg() takes the printk prefix as the second parameter and the format string as the third parameter. Two callers of ext3_msg omit the prefix and pass the format string as the second parameter and the first parameter to the format string as the third parameter. In both cases this string comes from an arbitrary source. Which means the string may contain format string characters, which will lead to undefined and potentially harmful behavior. The issue was introduced in commit 4cf46b67eb("ext3: Unify log messages in ext3") and is fixed by this patch. CC: stable@vger.kernel.org Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jan Kara <jack@suse.cz>
2013-03-04fs: Limit sys_mount to only request filesystem modules.Eric W. Biederman1-0/+1
Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-27Merge branch 'for_linus' of ↵Linus Torvalds1-21/+30
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2, ext3, udf updates from Jan Kara: "Several UDF fixes, a support for UDF extent cache, and couple of ext2 and ext3 cleanups and minor fixes" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: Ext2: remove the static function release_blocks to optimize the kernel Ext2: mark inode dirty after the function dquot_free_block_nodirty is called Ext2: remove the overhead check about sb in the function ext2_new_blocks udf: Remove unused s_extLength from udf_bitmap udf: Make s_block_bitmap standard array udf: Fix bitmap overflow on large filesystems with small block size udf: add extent cache support in case of file reading udf: Write LVID to disk after opening / closing Ext3: return ENOMEM rather than EIO if sb_getblk fails Ext2: return ENOMEM rather than EIO if sb_getblk fails Ext3: use unlikely to improve the efficiency of the kernel Ext2: use unlikely to improve the efficiency of the kernel Ext3: add necessary check in case IO error happens Ext2: free memory allocated and forget buffer head when io error happens ext3: Fix memory leak when quota options are specified multiple times ext3, ext4, ocfs2: remove unused macro NAMEI_RA_INDEX
2013-02-22block: optionally snapshot page contents to provide stable pages during writeDarrick J. Wong1-0/+1
This provides a band-aid to provide stable page writes on jbd without needing to backport the fixed locking and page writeback bit handling schemes of jbd2. The band-aid works by using bounce buffers to snapshot page contents instead of waiting. For those wondering about the ext3 bandage -- fixing the jbd locking (which was done as part of ext4dev years ago) is a lot of surgery, and setting PG_writeback on data pages when we actually hold the page lock dropped ext3 performance by nearly an order of magnitude. If we're going to migrate iscsi and raid to use stable page writes, the complaints about high latency will likely return. We might as well centralize their page snapshotting thing to one place. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-21ext3: Fix memory leak when quota options are specified multiple timesJan Kara1-21/+30
When usrjquota or grpjquota mount options are specified several times, we leak memory storing the names. Free the memory correctly. Reported-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-12-13ext3: get rid of the duplicate code on ext3_fill_superZhao Hongjiang1-3/+0
Setting s_mount_opt to 0 is unnecessary because we use kzalloc() for sb allocation. s_resuid and s_resgid are set again few lines below based on values in on disk superblock. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-10-17Merge branch 'for_linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2, ext3, quota fixes from Jan Kara: "Fix three regressions caused by user namespace conversions (ext2, ext3, quota) and minor ext3 fix and cleanup." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Silence warning about PRJQUOTA not being handled in need_print_warning() ext3: fix return values on parse_options() failure ext2: fix return values on parse_options() failure ext3: ext3_bread usage audit ext3: fix possible non-initialized variable on htree_dirblock_to_tree()
2012-10-10ext3: drop lock/unlock superMarco Stornelli1-6/+0
Removed lock/unlock super. Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-10ext3: fix return values on parse_options() failureZhao Hongjiang1-2/+2
parse_options() in ext3 should return 0 when parse the mount options fails. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-10-04Merge branch 'for_linus' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext3 & udf fixes from Jan Kara: "Shortlog pretty much says it all. The interesting bits are UDF support for direct IO and ext3 fix for a long standing oops in data=journal mode." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: jbd: Fix assertion failure in commit code due to lacking transaction credits UDF: Add support for O_DIRECT ext3: Replace 0 with NULL for pointer in super.c file udf: add writepages support for udf ext3: don't clear orphan list on ro mount with errors reiserfs: Make reiserfs_xattr_handlers static
2012-10-03Merge branch 'for-linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs update from Al Viro: - big one - consolidation of descriptor-related logics; almost all of that is moved to fs/file.c (BTW, I'm seriously tempted to rename the result to fd.c. As it is, we have a situation when file_table.c is about handling of struct file and file.c is about handling of descriptor tables; the reasons are historical - file_table.c used to be about a static array of struct file we used to have way back). A lot of stray ends got cleaned up and converted to saner primitives, disgusting mess in android/binder.c is still disgusting, but at least doesn't poke so much in descriptor table guts anymore. A bunch of relatively minor races got fixed in process, plus an ext4 struct file leak. - related thing - fget_light() partially unuglified; see fdget() in there (and yes, it generates the code as good as we used to have). - also related - bits of Cyrill's procfs stuff that got entangled into that work; _not_ all of it, just the initial move to fs/proc/fd.c and switch of fdinfo to seq_file. - Alex's fs/coredump.c spiltoff - the same story, had been easier to take that commit than mess with conflicts. The rest is a separate pile, this was just a mechanical code movement. - a few misc patches all over the place. Not all for this cycle, there'll be more (and quite a few currently sit in akpm's tree)." Fix up trivial conflicts in the android binder driver, and some fairly simple conflicts due to two different changes to the sock_alloc_file() interface ("take descriptor handling from sock_alloc_file() to callers" vs "net: Providing protocol type via system.sockprotoname xattr of /proc/PID/fd entries" adding a dentry name to the socket) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits) MAX_LFS_FILESIZE should be a loff_t compat: fs: Generic compat_sys_sendfile implementation fs: push rcu_barrier() from deactivate_locked_super() to filesystems btrfs: reada_extent doesn't need kref for refcount coredump: move core dump functionality into its own file coredump: prevent double-free on an error path in core dumper usb/gadget: fix misannotations fcntl: fix misannotations ceph: don't abuse d_delete() on failure exits hypfs: ->d_parent is never NULL or negative vfs: delete surplus inode NULL check switch simple cases of fget_light to fdget new helpers: fdget()/fdput() switch o2hb_region_dev_write() to fget_light() proc_map_files_readdir(): don't bother with grabbing files make get_file() return its argument vhost_set_vring(): turn pollstart/pollstop into bool switch prctl_set_mm_exe_file() to fget_light() switch xfs_find_handle() to fget_light() switch xfs_swapext() to fget_light() ...
2012-10-03fs: push rcu_barrier() from deactivate_locked_super() to filesystemsKirill A. Shutemov1-0/+5
There's no reason to call rcu_barrier() on every deactivate_locked_super(). We only need to make sure that all delayed rcu free inodes are flushed before we destroy related cache. Removing rcu_barrier() from deactivate_locked_super() affects some fast paths. E.g. on my machine exit_group() of a last process in IPC namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace changes from Eric Biederman: "This is a mostly modest set of changes to enable basic user namespace support. This allows the code to code to compile with user namespaces enabled and removes the assumption there is only the initial user namespace. Everything is converted except for the most complex of the filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs, nfs, ocfs2 and xfs as those patches need a bit more review. The strategy is to push kuid_t and kgid_t values are far down into subsystems and filesystems as reasonable. Leaving the make_kuid and from_kuid operations to happen at the edge of userspace, as the values come off the disk, and as the values come in from the network. Letting compile type incompatible compile errors (present when user namespaces are enabled) guide me to find the issues. The most tricky areas have been the places where we had an implicit union of uid and gid values and were storing them in an unsigned int. Those places were converted into explicit unions. I made certain to handle those places with simple trivial patches. Out of that work I discovered we have generic interfaces for storing quota by projid. I had never heard of the project identifiers before. Adding full user namespace support for project identifiers accounts for most of the code size growth in my git tree. Ultimately there will be work to relax privlige checks from "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing root in a user names to do those things that today we only forbid to non-root users because it will confuse suid root applications. While I was pushing kuid_t and kgid_t changes deep into the audit code I made a few other cleanups. I capitalized on the fact we process netlink messages in the context of the message sender. I removed usage of NETLINK_CRED, and started directly using current->tty. Some of these patches have also made it into maintainer trees, with no problems from identical code from different trees showing up in linux-next. After reading through all of this code I feel like I might be able to win a game of kernel trivial pursuit." Fix up some fairly trivial conflicts in netfilter uid/git logging code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits) userns: Convert the ufs filesystem to use kuid/kgid where appropriate userns: Convert the udf filesystem to use kuid/kgid where appropriate userns: Convert ubifs to use kuid/kgid userns: Convert squashfs to use kuid/kgid where appropriate userns: Convert reiserfs to use kuid and kgid where appropriate userns: Convert jfs to use kuid/kgid where appropriate userns: Convert jffs2 to use kuid and kgid where appropriate userns: Convert hpfs to use kuid and kgid where appropriate userns: Convert btrfs to use kuid/kgid where appropriate userns: Convert bfs to use kuid/kgid where appropriate userns: Convert affs to use kuid/kgid wherwe appropriate userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids userns: On ia64 deal with current_uid and current_gid being kuid and kgid userns: On ppc convert current_uid from a kuid before printing. userns: Convert s390 getting uid and gid system calls to use kuid and kgid userns: Convert s390 hypfs to use kuid and kgid where appropriate userns: Convert binder ipc to use kuids userns: Teach security_path_chown to take kuids and kgids userns: Add user namespace support to IMA userns: Convert EVM to deal with kuids and kgids in it's hmac computation ...
2012-09-18userns: Convert struct dquot dq_id to be a struct kqidEric W. Biederman1-1/+1
Change struct dquot dq_id to a struct kqid and remove the now unecessary dq_type. Make minimal changes to dquot, quota_tree, quota_v1, quota_v2, ext3, ext4, and ocfs2 to deal with the change in quota structures and signatures. The ocfs2 changes are larger than most because of the extensive tracing throughout the ocfs2 quota code that prints out dq_id. quota_tree.c:get_index is modified to take a struct kqid instead of a qid_t because all of it's callers pass in dquot->dq_id and it allows me to introduce only a single conversion. The rest of the changes are either just replacing dq_type with dq_id.type, adding conversions to deal with the change in type and occassionally adding qid_eq to allow quota id comparisons in a user namespace safe way. Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Theodore Tso <tytso@mit.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-04ext3: Replace 0 with NULL for pointer in super.c fileSachin Kamat1-1/+1
Fixes the following sparse warning: fs/ext3/super.c:983:45: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz>
2012-09-04ext3: don't clear orphan list on ro mount with errorsEric Sandeen1-2/+4
When we have a filesystem with an orphan inode list *and* in error state, things behave differently if: 1) e2fsck -p is done prior to mount: e2fsck fixes things and exits happily (barring other significant problems) vs. 2) mount is done first, then e2fsck -p: due to the orphan inode list removal, more errors are found and e2fsck exits with UNEXPECTED INCONSISTENCY. The 2nd case above, on the root filesystem, has the tendency to halt the boot process, which is unfortunate. The situation can be improved by not clearing the orphan inode list when the fs is mounted readonly. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-08-04ext3: nuke write_super from commentsArtem Bityutskiy1-11/+0
The '->write_super' superblock method is gone, and this patch removes all the references to 'write_super' from ext3. Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-25Merge branch 'for_linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull misc udf, ext2, ext3, and isofs fixes from Jan Kara: "Assorted, mostly trivial, fixes for udf, ext2, ext3, and isofs. I'm on vacation and scarcely checking email since we are expecting baby any day now but these fixes should be safe to go in and I don't want to delay them unnecessarily." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: avoid info leak on export isofs: avoid info leak on export udf: Improve table length check to avoid possible overflow ext3: Check return value of blkdev_issue_flush() jbd: Check return value of blkdev_issue_flush() udf: Do not decrement i_blocks when freeing indirect extent block udf: Fix memory leak when mounting ext2: cleanup the confused goto label UDF: Remove unnecessary variable "offset" from udf_fill_inode udf: stop using s_dirt ext3: force ro mount if ext3_setup_super() fails quota: fix checkpatch.pl warning by replacing <asm/uaccess.h> with <linux/uaccess.h>
2012-07-22quota: Move quota syncing to ->sync_fs methodJan Kara1-0/+5
Since the moment writes to quota files are using block device page cache and space for quota structures is reserved at the moment they are first accessed we have no reason to sync quota before inode writeback. In fact this order is now only harmful since quota information can easily change during inode writeback (either because conversion of delayed-allocated extents or simply because of allocation of new blocks for simple filesystems not using page_mkwrite). So move syncing of quota information after writeback of inodes into ->sync_fs method. This way we do not have to use ->quota_sync callback which is primarily intended for use by quotactl syscall anyway and we get rid of calling ->sync_fs() twice unnecessarily. We skip quota syncing for OCFS2 since it does proper quota journalling in all cases (unlike ext3, ext4, and reiserfs which also support legacy non-journalled quotas) and thus there are no dirty quota structures. CC: "Theodore Ts'o" <tytso@mit.edu> CC: Joel Becker <jlbec@evilplan.org> CC: reiserfs-devel@vger.kernel.org Acked-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Dave Kleikamp <shaggy@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-09ext3: force ro mount if ext3_setup_super() failsEric Sandeen1-1/+2
If ext3_setup_super() fails i.e. due to a too-high revision, the error is logged in dmesg but the fs is not mounted RO as indicated. Tested by: [164152.114551] EXT3-fs (sdb6): error: revision level too high, forcing read-only mode /dev/sdb6 /mnt/test2 ext3 rw,seclabel,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered 0 0 ^^ Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Andreas Dilger <adilger@whamcloud.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-05-25Merge branch 'for_linus' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2, ext3 and quota fixes from Jan Kara: "Interesting bits are: - removal of a special i_mutex locking subclass (I_MUTEX_QUOTA) since quota code does not need i_mutex anymore in any unusual way. - backport (from ext4) of a fix of a checkpointing bug (missing cache flush) that could lead to fs corruption on power failure The rest are just random small fixes & cleanups." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: trivial fix to comment for ext2_free_blocks ext2: remove the redundant comment for ext2_export_ops ext3: return 32/64-bit dir name hash according to usage type quota: Get rid of nested I_MUTEX_QUOTA locking subclass quota: Use precomputed value of sb_dqopt in dquot_quota_sync ext2: Remove i_mutex use from ext2_quota_write() reiserfs: Remove i_mutex use from reiserfs_quota_write() ext4: Remove i_mutex use from ext4_quota_write() ext3: Remove i_mutex use from ext3_quota_write() quota: Fix double lock in add_dquot_ref() with CONFIG_QUOTA_DEBUG jbd: Write journal superblock with WRITE_FUA after checkpointing jbd: protect all log tail updates with j_checkpoint_mutex jbd: Split updating of journal superblock and marking journal empty ext2: do not register write_super within VFS ext2: Remove s_dirt handling ext2: write superblock only once on unmount ext3: update documentation with barrier=1 default ext3: remove max_debt in find_group_orlov() jbd: Refine commit writeout logic
2012-05-16userns: Convert ext3 to use kuid/kgid where appropriateEric W. Biederman1-10/+25
Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-16ext3: Remove i_mutex use from ext3_quota_write()Jan Kara1-5/+1
We don't need i_mutex in ext3_quota_write() because writes to quota file are serialized by dqio_mutex anyway. Changes to quota files outside of quota code are forbidded and enforced by NOATIME and IMMUTABLE bits. Signed-off-by: Jan Kara <jack@suse.cz>
2012-04-01ext3: move headers to fs/ext3/Al Viro1-14/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-21switch open-coded instances of d_make_root() to new helperAl Viro1-2/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-10Merge branch 'for_linus' of ↵Linus Torvalds1-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2/3/4: delete unneeded includes of module.h ext{3,4}: Fix potential race when setversion ioctl updates inode udf: Mark LVID buffer as uptodate before marking it dirty ext3: Don't warn from writepage when readonly inode is spotted after error jbd: Remove j_barrier mutex reiserfs: Force inode evictions before umount to avoid crash reiserfs: Fix quota mount option parsing udf: Treat symlink component of type 2 as / udf: Fix deadlock when converting file from in-ICB one to normal one udf: Cleanup calling convention of inode_getblk() ext2: Fix error handling on inode bitmap corruption ext3: Fix error handling on inode bitmap corruption ext3: replace ll_rw_block with other functions ext3: NULL dereference in ext3_evict_inode() jbd: clear revoked flag on buffers before a new transaction started ext3: call ext3_mark_recovery_complete() when recovery is really needed
2012-01-09ext3: replace ll_rw_block with other functionsZheng Liu1-5/+5
ll_rw_block() is deprecated. Thus we replace it with other functions. CC: Jan Kara <jack@suse.cz> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-01-07vfs: switch ->show_options() to struct dentry *Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-07vfs: prefer ->dentry->d_sb to ->mnt->mnt_sbAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04vfs: fix the stupidity with i_dentry in inode destructorsAl Viro1-1/+0
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once(); the cost of taking it into inode_init_always() will be negligible for pipes and sockets and negative for everything else. Not to mention the removal of boilerplate code from ->destroy_inode() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-09ext3: call ext3_mark_recovery_complete() when recovery is really neededEryu Guan1-2/+3
Call ext3_mark_recovery_complete() in ext3_fill_super() only if needs_recovery is non-zero. Besides that, print out "recovery complete" message after calling ext3_mark_recovery_complete(). Cc: Jan Kara <jack@suse.cz> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-08-17ext3: remove deprecated oldallocLukas Czerner1-4/+4
For a long time now orlov is the default block allocator in the ext3. It performs better than the old one and no one seems to claim otherwise so we can safely drop it and make oldalloc and orlov mount option deprecated. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-08-17ext3: fix message in ext3_remount for rw-remount caseToshiyuki Okajima1-2/+2
If there are some inodes in orphan list while a filesystem is being read-only mounted, we should recommend that peole umount and then mount it when they try to remount with read-write. But the current message and comment recommend that they umount and then remount it which may be slightly misleading. Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-07-26Merge branch 'for_linus' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: jbd: change the field "b_cow_tid" of struct journal_head from type unsigned to tid_t ext3.txt: update the links in the section "useful links" to the latest ones ext3: Fix data corruption in inodes with journalled data ext2: check xattr name_len before acquiring xattr_sem in ext2_xattr_get ext3: Fix compilation with -DDX_DEBUG quota: Remove unused declaration jbd: Use WRITE_SYNC in journal checkpoint. jbd: Fix oops in journal_remove_journal_head() ext3: Return -EINVAL when start is beyond the end of fs in ext3_trim_fs() ext3/ioctl.c: silence sparse warnings about different address spaces ext3/ext4 Documentation: remove bh/nobh since it has been deprecated ext3: Improve truncate error handling ext3: use proper little-endian bitops ext2: include fs.h into ext2_fs.h ext3: Fix oops in ext3_try_to_allocate_with_rsv() jbd: fix a bug of leaking jh->b_jcount jbd: remove dependency on __GFP_NOFAIL ext3: Convert ext3 to new truncate calling convention jbd: Add fixed tracepoints ext3: Add fixed tracepoints Resolve conflicts in fs/ext3/fsync.c due to fsync locking push-down and new fixed tracepoints.
2011-07-21ext3: make ext3 mount default to barrier=1Christoph Hellwig1-0/+2
This patch turns on barriers by default for ext3. mount -o barrier=0 will turn them off. Based on a patch from Chris Mason in the SuSE tree. Signed-off-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Ted Ts'o <tytso@mit.edu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-06-25ext3: Add fixed tracepointsLukas Czerner1-0/+13
This commit adds fixed tracepoints to the ext3 code. It is based on ext4 tracepoints, however due to the differences of both file systems, there are some tracepoints missing (those for delaloc and for multi-block allocator) and there are some ext3 specific as well (for reservation windows). Here is a list: ext3_free_inode ext3_request_inode ext3_allocate_inode ext3_evict_inode ext3_drop_inode ext3_mark_inode_dirty ext3_write_begin ext3_ordered_write_end ext3_writeback_write_end ext3_journalled_write_end ext3_ordered_writepage ext3_writeback_writepage ext3_journalled_writepage ext3_readpage ext3_releasepage ext3_invalidatepage ext3_discard_blocks ext3_request_blocks ext3_allocate_blocks ext3_free_blocks ext3_sync_file_enter ext3_sync_file_exit ext3_sync_fs ext3_rsv_window_add ext3_discard_reservation ext3_alloc_new_reservation ext3_reserved ext3_forget ext3_read_block_bitmap ext3_direct_IO_enter ext3_direct_IO_exit ext3_unlink_enter ext3_unlink_exit ext3_truncate_enter ext3_truncate_exit ext3_get_blocks_enter ext3_get_blocks_exit ext3_load_inode Signed-off-by: Lukas Czerner <lczerner@redhat.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jan Kara <jack@suse.cz>
2011-05-26ext3: add cleancache supportDan Magenheimer1-0/+2
This fifth patch of eight in this cleancache series "opts-in" cleancache for ext3. Filesystems must explicitly enable cleancache by calling cleancache_init_fs anytime an instance of the filesystem is mounted. For ext3, all other cleancache hooks are in the VFS layer including the matching cleancache_flush_fs hook which must be called on unmount. Details and a FAQ can be found in Documentation/vm/cleancache.txt [v6-v8: no changes] [v5: jeremy@goop.org: simplify init hook and any future fs init changes] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Andreas Dilger <adilger@sun.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-18Merge branch 'for_linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: ext3: Always set dx_node's fake_dirent explicitly. ext3: Fix an overflow in ext3_trim_fs. jbd: Remove one to many n's in a word. ext3: skip orphan cleanup on rocompat fs ext2: Fix link count corruption under heavy link+rename load ext3: speed up group trim with the right free block count. ext3: Adjust trim start with first_data_block. quota: return -ENOMEM when memory allocation fails
2011-03-15ext3: Copy fs UUID to superblock.Aneesh Kumar K.V1-0/+1
File system UUID is made available to application via /proc/<pid>/mountinfo Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-02-28ext3: skip orphan cleanup on rocompat fsAmir Goldstein1-0/+7
Orphan cleanup is currently executed even if the file system has some number of unknown ROCOMPAT features, which deletes inodes and frees blocks, which could be very bad for some RO_COMPAT features. This patch skips the orphan cleanup if it contains readonly compatible features not known by this ext3 implementation, which would prevent the fs from being mounted (or remounted) readwrite. Signed-off-by: Amir Goldstein <amir73il@users.sf.net> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-21Merge branch 'for_linus' of ↵Linus Torvalds1-18/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Fix deadlock during path resolution
2011-01-13Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds1-10/+2
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits) block: ensure that completion error gets properly traced blktrace: add missing probe argument to block_bio_complete block cfq: don't use atomic_t for cfq_group block cfq: don't use atomic_t for cfq_queue block: trace event block fix unassigned field block: add internal hd part table references block: fix accounting bug on cross partition merges kref: add kref_test_and_get bio-integrity: mark kintegrityd_wq highpri and CPU intensive block: make kblockd_workqueue smarter Revert "sd: implement sd_check_events()" block: Clean up exit_io_context() source code. Fix compile warnings due to missing removal of a 'ret' variable fs/block: type signature of major_to_index(int) to major_to_index(unsigned) block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p) cfq-iosched: don't check cfqg in choose_service_tree() fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors cdrom: export cdrom_check_events() sd: implement sd_check_events() sr: implement sr_check_events() ...
2011-01-12quota: Fix deadlock during path resolutionJan Kara1-18/+7
As Al Viro pointed out path resolution during Q_QUOTAON calls to quotactl is prone to deadlocks. We hold s_umount semaphore for reading during the path resolution and resolution itself may need to acquire the semaphore for writing when e. g. autofs mountpoint is passed. Solve the problem by performing the resolution before we get hold of the superblock (and thus s_umount semaphore). The whole thing is complicated by the fact that some filesystems (OCFS2) ignore the path argument. So to distinguish between filesystem which want the path and which do not we introduce new .quota_on_meta callback which does not get the path. OCFS2 then uses this callback instead of old .quota_on. CC: Al Viro <viro@ZenIV.linux.org.uk> CC: Christoph Hellwig <hch@lst.de> CC: Ted Ts'o <tytso@mit.edu> CC: Joel Becker <joel.becker@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-12Merge branch 'for_linus' of ↵Linus Torvalds1-22/+42
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: ext2: Resolve 'dereferencing pointer to incomplete type' when enabling EXT2_XATTR_DEBUG ext3: Remove redundant unlikely() ext2: Remove redundant unlikely() ext3: speed up file creates by optimizing rec_len functions ext2: speed up file creates by optimizing rec_len functions ext3: Add more journal error check ext3: Add journal error check in resize.c quota: Use %pV and __attribute__((format (printf in __quota_error and fix fallout ext3: Add FITRIM handling ext3: Add batched discard support for ext3 ext3: Add journal error check into ext3_rename() ext3: Use search_dirblock() in ext3_dx_find_entry() ext3: Avoid uninitialized memory references with a corrupted htree directory ext3: Return error code from generic_check_addressable ext3: Add journal error check into ext3_delete_entry() ext3: Add error check in ext3_mkdir() fs/ext3/super.c: Use printf extension %pV fs/ext2/super.c: Use printf extension %pV ext3: don't update sb journal_devnum when RO dev