| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit f87c7a4b084afc13190cbb263538e444cb2b392a upstream.
Hulk Robot reported a BUG_ON:
==================================================================
EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0,
block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters
kernel BUG at fs/ext4/ext4_jbd2.c:53!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1
RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline]
RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116
[...]
Call Trace:
ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795
generic_perform_write+0x279/0x3c0 mm/filemap.c:3344
ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270
ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520
do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732
do_iter_write+0x107/0x430 fs/read_write.c:861
vfs_writev fs/read_write.c:934 [inline]
do_pwritev+0x1e5/0x380 fs/read_write.c:1031
[...]
==================================================================
Above issue may happen as follows:
cpu1 cpu2
__________________________|__________________________
do_pwritev
vfs_writev
do_iter_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_destroy_inline_data_nolock
clear EXT4_STATE_MAY_INLINE_DATA
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
ext4_mb_regular_allocator
ext4_mb_good_group_nolock
ext4_mb_init_group
ext4_mb_init_cache
ext4_mb_generate_buddy --> error
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_restore_inline_data
set EXT4_STATE_MAY_INLINE_DATA
ext4_block_write_begin
ext4_da_write_end
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_write_inline_data_end
handle=NULL
ext4_journal_stop(handle)
__ext4_journal_stop
ext4_put_nojournal(handle)
ref_cnt = (unsigned long)handle
BUG_ON(ref_cnt == 0) ---> BUG_ON
The lock held by ext4_convert_inline_data is xattr_sem, but the lock
held by generic_perform_write is i_rwsem. Therefore, the two locks can
be concurrent.
To solve above issue, we add inode_lock() for ext4_convert_inline_data().
At the same time, move ext4_convert_inline_data() in front of
ext4_punch_hole(), remove similar handling from ext4_punch_hole().
Fixes: 0c8d414f163f ("ext4: let fallocate handle inline data correctly")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220428134031.4153381-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d36f6ed761b53933b0b4126486c10d3da7751e7f upstream.
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/extents_status.c:199!
[...]
RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline]
RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217
[...]
Call Trace:
ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766
ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561
ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964
ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384
ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567
ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980
ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031
ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257
v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63
v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82
vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368
dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490
ext4_quota_enable fs/ext4/super.c:6137 [inline]
ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163
ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754
mount_bdev+0x2e9/0x3b0 fs/super.c:1158
mount_fs+0x4b/0x1e4 fs/super.c:1261
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_enable_quotas
ext4_quota_enable
ext4_iget
__ext4_iget
ext4_ext_check_inode
ext4_ext_check
__ext4_ext_check
ext4_valid_extent_entries
Check for overlapping extents does't take effect
dquot_enable
vfs_load_quota_inode
v2_check_quota_file
v2_read_header
ext4_quota_read
ext4_bread
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_find_extent
ext4_cache_extents
ext4_es_cache_extent
ext4_es_cache_extent
__es_tree_search
ext4_es_end
BUG_ON(es->es_lblk + es->es_len < es->es_lblk)
The error ext4 extents is as follows:
0af3 0300 0400 0000 00000000 extent_header
00000000 0100 0000 12000000 extent1
00000000 0100 0000 18000000 extent2
02000000 0400 0000 14000000 extent3
In the ext4_valid_extent_entries function,
if prev is 0, no error is returned even if lblock<=prev.
This was intended to skip the check on the first extent, but
in the error image above, prev=0+1-1=0 when checking the second extent,
so even though lblock<=prev, the function does not return an error.
As a result, bug_ON occurs in __es_tree_search and the system panics.
To solve this problem, we only need to check that:
1. The lblock of the first extent is not less than 0.
2. The lblock of the next extent is not less than
the next block of the previous extent.
The same applies to extent_idx.
Cc: stable@kernel.org
Fixes: 5946d089379a ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518120816.1541863-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad5cd4f4ee4d5fcdb1bfb7a0c073072961e70783 upstream.
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220308185043.GA117678@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 599ea31d13617c5484c40cdf50d88301dc351cfc upstream.
During fast commit replay procedure, we clear inode blocks bitmap in
ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate
blocks still in use.
Make ext4_fc_record_regions() also record physical disk regions used by
inodes during replay procedure. Then ext4_mb_new_blocks_simple() can
excludes these blocks in use.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220110035141.1980-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5e4d0eba1ccaf19f93222abdeda5a368be141785 upstream.
when call falloc with FALLOC_FL_ZERO_RANGE, to set an range to unwritten,
which has been already initialized. If the range is align to blocksize,
fast commit will not track range for this change.
Also track range for unwritten range in ext4_map_blocks().
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211221022839.374606-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c6e071913792d80894cd0be98cc3c4b770e26d3 upstream.
Now that we can check out overlapping extents in leaf block and
out-of-order index extents in index block. But the .ee_block in the
first extent of one leaf block should equal to the .ei_block in it's
parent index extent entry. This patch add a check to verify such
inconsistent between the index and leaf block.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210908120850.4012324-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8dd27fecede55e8a4e67eef2878040ecad0f0d33 upstream.
After commit 5946d089379a ("ext4: check for overlapping extents in
ext4_valid_extent_entries()"), we can check out the overlapping extent
entry in leaf extent blocks. But the out-of-order extent entry in index
extent blocks could also trigger bad things if the filesystem is
inconsistent. So this patch add a check to figure out the out-of-order
index extents and return error.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210908120850.4012324-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0f2f87d51aebcf71a709b52f661d681594c7dffa upstream.
In the most error path of current extents updating operations are not
roll back partial updates properly when some bad things happens(.e.g in
ext4_ext_insert_extent()). So we may get an inconsistent extents tree
if journal has been aborted due to IO error, which may probability lead
to BUGON later when we accessing these extent entries in errors=continue
mode. This patch drop extent buffer's verify flag before updatng the
contents in ext4_ext_get_access(), and reset it after updating in
__ext4_ext_dirty(). After this patch we could force to check the extent
buffer if extents tree updating was break off, make sure the extents are
consistent.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210908120850.4012324-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1811bc401aa58c7bdb0df3205aa6613b49d32127 upstream.
After we drop i_data sem, we need to reload the ext4_ext_path
structure since the extent tree can change once i_data_sem is
released.
This addresses the BUG:
[52117.465187] ------------[ cut here ]------------
[52117.465686] kernel BUG at fs/ext4/extents.c:1756!
...
[52117.478306] Call Trace:
[52117.478565] ext4_ext_shift_extents+0x3ee/0x710
[52117.479020] ext4_fallocate+0x139c/0x1b40
[52117.479405] ? __do_sys_newfstat+0x6b/0x80
[52117.479805] vfs_fallocate+0x151/0x4b0
[52117.480177] ksys_fallocate+0x4a/0xa0
[52117.480533] __x64_sys_fallocate+0x22/0x30
[52117.480930] do_syscall_64+0x35/0x80
[52117.481277] entry_SYSCALL_64_after_hwframe+0x44/0xae
[52117.481769] RIP: 0033:0x7fa062f855ca
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210903062748.4118886-4-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4268496e48dc681cfa53b92357314b5d7221e625 upstream.
Like ext4_ext_rm_leaf, we can ensure that there are enough credits
before every call that will consume credits. As part of this fix we
fold the functionality of ext4_access_path() into
ext4_ext_shift_path_extents(). This change is needed as a preparation
for the next bugfix patch.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210903062748.4118886-3-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1fd95c05d8f742abfe906620780aee4dbe1a2db0 upstream.
If the call to ext4_map_blocks() fails due to an corrupted file
system, ext4_ext_replay_set_iblocks() can get stuck in an infinite
loop. This could be reproduced by running generic/526 with a file
system that has inline_data and fast_commit enabled. The system will
repeatedly log to the console:
EXT4-fs warning (device dm-3): ext4_block_to_path:105: block 1074800922 > max in inode 131076
and the stack that it gets stuck in is:
ext4_block_to_path+0xe3/0x130
ext4_ind_map_blocks+0x93/0x690
ext4_map_blocks+0x100/0x660
skip_hole+0x47/0x70
ext4_ext_replay_set_iblocks+0x223/0x440
ext4_fc_replay_inode+0x29e/0x3b0
ext4_fc_replay+0x278/0x550
do_one_pass+0x646/0xc10
jbd2_journal_recover+0x14a/0x270
jbd2_journal_load+0xc4/0x150
ext4_load_journal+0x1f3/0x490
ext4_fill_super+0x22d4/0x2c00
With this patch, generic/526 still fails, but system is no longer
locking up in a tight loop. It's likely the root casue is that
fast_commit replay is corrupting file systems with inline_data, and we
probably need to add better error handling in the fast commit replay
code path beyond what is done here, which essentially just breaks the
infinite loop without reporting the to the higher levels of the code.
Fixes: 8016E29F4362 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Cc: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ce3aba43599f0b50adbebff133df8d08a3d5fffe upstream.
Initialize eh_generation of struct ext4_extent_header to prevent leaking
info to userspace. Fixes KMSAN kernel-infoleak bug reported by syzbot at:
http://syzkaller.appspot.com/bug?id=78e9ad0e6952a3ca16e8234724b2fa92d041b9b8
Cc: stable@kernel.org
Reported-by: syzbot+2dcfeaf8cb49b05e8f1a@syzkaller.appspotmail.com
Fixes: a86c61812637 ("[PATCH] ext3: add extent map support")
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210506185655.7118-1-mail@anirudhrb.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 082cd4ec240b8734a82a89ffb890216ac98fec68 upstream.
We got follow bug_on when run fsstress with injecting IO fault:
[130747.323114] kernel BUG at fs/ext4/extents_status.c:762!
[130747.323117] Internal error: Oops - BUG: 0 [#1] SMP
......
[130747.334329] Call trace:
[130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4]
[130747.334975] ext4_cache_extents+0x64/0xe8 [ext4]
[130747.335368] ext4_find_extent+0x300/0x330 [ext4]
[130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4]
[130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4]
[130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4]
[130747.336995] ext4_readpage+0x54/0x100 [ext4]
[130747.337359] generic_file_buffered_read+0x410/0xae8
[130747.337767] generic_file_read_iter+0x114/0x190
[130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4]
[130747.338556] __vfs_read+0x11c/0x188
[130747.338851] vfs_read+0x94/0x150
[130747.339110] ksys_read+0x74/0xf0
This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable). Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc18546bf68e47996a359d2533168d5770a22024 upstream.
The ext4_find_extent() function never returns NULL, it returns error
pointers.
Fixes: 44059e503b03 ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201023112232.GB282278@mwanda
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Firstly, pass handle to all ext4_fc_track_* functions and use
transaction id found in handle->h_transaction->h_tid for tracking fast
commit updates. Secondly, don't pass inode to
ext4_fc_track_link/create/unlink functions. inode can be found inside
these functions as d_inode(dentry). However, rename path is an
exeception. That's because in that case, we need inode that's not same
as d_inode(dentry). To handle that, add a couple of low-level wrapper
functions that take inode and dentry as arguments.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_fc_track_range() should only be called when blocks are added or
removed from an inode. So, the only places from where we need to call
this function are ext4_map_blocks(), punch hole, collapse / zero
range, truncate. Remove all the other redundant calls to ths function.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-4-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_ext_search_right() will read more extent blocks and call put_bh
after we get the information we need. However, ret_ex will break this
and may cause use-after-free once pagecache has been freed. Fix it by
copying the extent structure if needed.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20201028055617.2569255-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds main fast commit commit path handlers. The overall
patch can be divided into two inter-related parts:
(A) Metadata updates tracking
This part consists of helper functions to track changes that need
to be committed during a commit operation. These updates are
maintained by Ext4 in different in-memory queues. Following are
the APIs and their short description that are implemented in this
patch:
- ext4_fc_track_link/unlink/creat() - Track unlink. link and creat
operations
- ext4_fc_track_range() - Track changed logical block offsets
inodes
- ext4_fc_track_inode() - Track inodes
- ext4_fc_mark_ineligible() - Mark file system fast commit
ineligible()
- ext4_fc_start_update() / ext4_fc_stop_update() /
ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These
functions are useful for co-ordinating inode updates with
commits.
(B) Main commit Path
This part consists of functions to convert updates tracked in
in-memory data structures into on-disk commits. Function
ext4_fc_commit() is the main entry point to commit path.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
left shifting m_lblk by blkbits was causing value overflow and hence
it was not able to convert unwritten to written extent.
So, make sure we typecast it to loff_t before do left shift operation.
Also in func ext4_convert_unwritten_io_end_vec(), make sure to initialize
ret variable to avoid accidentally returning an uninitialized ret.
This patch fixes the issue reported in ext4 for bs < ps with
dioread_nolock mount option.
Fixes: c8cc88163f40df39e50c ("ext4: Add support for blocksize < pagesize in dioread_nolock")
Cc: stable@kernel.org
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/af902b5db99e8b73980c795d84ad7bb417487e76.1602168865.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Revome all open codes that read metadata buffers, switch to use
ext4_read_bh_*() common helpers.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200924073337.861472-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The metadata buffer is no longer trusted after we read it from disk
again because it is not uptodate for some reasons (e.g. failed to write
back). Otherwise we may get below memory corruption problem in
ext4_ext_split()->memset() if we read stale data from the newly
allocated extent block on disk which has been failed to async write
out but miss verify again since the verified bit has already been set
on the buffer.
[ 29.774674] BUG: unable to handle kernel paging request at ffff88841949d000
...
[ 29.783317] Oops: 0002 [#2] SMP
[ 29.784219] R10: 00000000000f4240 R11: 0000000000002e28 R12: ffff88842fa1c800
[ 29.784627] CPU: 1 PID: 126 Comm: kworker/u4:3 Tainted: G D W
[ 29.785546] R13: ffffffff9cddcc20 R14: ffffffff9cddd420 R15: ffff88842fa1c2f8
[ 29.786679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS ?-20190727_0738364
[ 29.787588] FS: 0000000000000000(0000) GS:ffff88842fa00000(0000) knlGS:0000000000000000
[ 29.789288] Workqueue: writeback wb_workfn
[ 29.790319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 29.790321] (flush-8:0)
[ 29.790844] CR2: 0000000000000008 CR3: 00000004234f2000 CR4: 00000000000006f0
[ 29.791924] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 29.792839] RIP: 0010:__memset+0x24/0x30
[ 29.793739] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 29.794256] Code: 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 033
[ 29.795161] Kernel panic - not syncing: Fatal exception in interrupt
...
[ 29.808149] Call Trace:
[ 29.808475] ext4_ext_insert_extent+0x102e/0x1be0
[ 29.809085] ext4_ext_map_blocks+0xa89/0x1bb0
[ 29.809652] ext4_map_blocks+0x290/0x8a0
[ 29.809085] ext4_ext_map_blocks+0xa89/0x1bb0
[ 29.809652] ext4_map_blocks+0x290/0x8a0
[ 29.810161] ext4_writepages+0xc85/0x17c0
...
Fix this by clearing buffer's verified bit if we read meta block from
disk again.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200924073337.861472-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Delete repeated words in fs/ext4/.
{the, this, of, we, after}
Also change spelling of "xttr" in inline.c to "xattr" in 2 places.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200805024850.12129-1-rdunlap@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.
After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:
Running time on unfixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m2.051s
user 0m0.008s
sys 0m2.026s
Running time on fixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m0.471s
user 0m0.004s
sys 0m0.395s
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, system zones just track ranges of block, that are "important"
fs metadata (bitmaps, group descriptors, journal blocks, etc.). This
however complicates how extent tree (or indirect blocks) can be checked
for inodes that actually track such metadata - currently the journal
inode but arguably we should be treating quota files or resize inode
similarly. We cannot run __ext4_ext_check() on such metadata inodes when
loading their extents as that would immediately trigger the validity
checks and so we just hack around that and special-case the journal
inode. This however leads to a situation that a journal inode which has
extent tree of depth at least one can have invalid extent tree that gets
unnoticed until ext4_cache_extents() crashes.
To overcome this limitation, track inode number each system zone belongs
to (0 is used for zones not belonging to any inode). We can then verify
inode number matches the expected one when verifying extent tree and
thus avoid the false errors. With this there's no need to to
special-case journal inode during extent tree checking anymore so remove
it.
Fixes: 0a944e8a6c66 ("ext4: don't perform block validity checks on the journal inode")
Reported-by: Wolfgang Frisch <wolfgang.frisch@suse.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The brelse() function tests whether its argument is NULL
and then returns immediately.
Thus remove the tests which are not needed around the shown calls.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/0d713702-072f-a89c-20ec-ca70aa83a432@web.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fix spelling issues over the comments in the code.
requsted ==> requested
deterimined ==> determined
insde ==> inside
neet ==> need
somthing ==> something
Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200611031947.165079-1-iamkeyur96@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fix the bug when calculating the physical block number of the first
block in the split extent.
This bug will cause xfstests shared/298 failure on ext4 with bigalloc
enabled occasionally. Ext4 error messages indicate that previously freed
blocks are being freed again, and the following fsck will fail due to
the inconsistency of block bitmap and bg descriptor.
The following is an example case:
1. First, Initialize a ext4 filesystem with cluster size '16K', block size
'4K', in which case, one cluster contains four blocks.
2. Create one file (e.g., xxx.img) on this ext4 filesystem. Now the extent
tree of this file is like:
...
36864:[0]4:220160
36868:[0]14332:145408
51200:[0]2:231424
...
3. Then execute PUNCH_HOLE fallocate on this file. The hole range is
like:
..
ext4_ext_remove_space: dev 254,16 ino 12 since 49506 end 49506 depth 1
ext4_ext_remove_space: dev 254,16 ino 12 since 49544 end 49546 depth 1
ext4_ext_remove_space: dev 254,16 ino 12 since 49605 end 49607 depth 1
...
4. Then the extent tree of this file after punching is like
...
49507:[0]37:158047
49547:[0]58:158087
...
5. Detailed procedure of punching hole [49544, 49546]
5.1. The block address space:
```
lblk ~49505 49506 49507~49543 49544~49546 49547~
---------+------+-------------+----------------+--------
extent | hole | extent | hole | extent
---------+------+-------------+----------------+--------
pblk ~158045 158046 158047~158083 158084~158086 158087~
```
5.2. The detailed layout of cluster 39521:
```
cluster 39521
<------------------------------->
hole extent
<----------------------><--------
lblk 49544 49545 49546 49547
+-------+-------+-------+-------+
| | | | |
+-------+-------+-------+-------+
pblk 158084 1580845 158086 158087
```
5.3. The ftrace output when punching hole [49544, 49546]:
- ext4_ext_remove_space (start 49544, end 49546)
- ext4_ext_rm_leaf (start 49544, end 49546, last_extent [49507(158047), 40], partial [pclu 39522 lblk 0 state 2])
- ext4_remove_blocks (extent [49507(158047), 40], from 49544 to 49546, partial [pclu 39522 lblk 0 state 2]
- ext4_free_blocks: (block 158084 count 4)
- ext4_mballoc_free (extent 1/6753/1)
5.4. Ext4 error message in dmesg:
EXT4-fs error (device vdb): mb_free_blocks:1457: group 1, block 158084:freeing already freed block (bit 6753); block bitmap corrupt.
EXT4-fs error (device vdb): ext4_mb_generate_buddy:747: group 1, block bitmap and bg descriptor inconsistent: 19550 vs 19551 free clusters
In this case, the whole cluster 39521 is freed mistakenly when freeing
pblock 158084~158086 (i.e., the first three blocks of this cluster),
although pblock 158087 (the last remaining block of this cluster) has
not been freed yet.
The root cause of this isuue is that, the pclu of the partial cluster is
calculated mistakenly in ext4_ext_remove_space(). The correct
partial_cluster.pclu (i.e., the cluster number of the first block in the
next extent, that is, lblock 49597 (pblock 158086)) should be 39521 rather
than 39522.
Fixes: f4226d9ea400 ("ext4: fix partial cluster initialization")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Eric Whitney <enwlinux@gmail.com>
Cc: stable@kernel.org # v3.19+
Link: https://lore.kernel.org/r/1590121124-37096-1-git-send-email-jefflexu@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,
like xfs/iomap intended with its duplicate handling. Also make sure the
error value of filemap_write_and_wait is propagated to user space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Replace fiemap_check_flags with a fiemap_prep helper that also takes the
inode and mapped range, and performs the sanity check and truncation
previously done in fiemap_check_range. This way the validation is inside
the file system itself and thus properly works for the stacked overlayfs
case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-7-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
iomap_fiemap already calls fiemap_check_flags first thing, so this
additional check is redundant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200523073016.2944131-3-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The fiemap and EXT4_IOC_GET_ES_CACHE cases share almost no code, so split
them into entirely separate functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200523073016.2944131-2-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add an extra validation of the len parameter, as for ext4 some files
might have smaller file size limits than others. This also means the
redundant size check in ext4_ioctl_get_es_cache can go away, as all
size checking is done in the shared fiemap handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200505154324.3226743-3-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The path performing block allocations in ext4_ext_map_blocks() contains
code trimming the length of a new extent that is repeated later
in the function. This code is both redundant and unnecessary as the
exact length of the new extent has already been calculated. Rewrite the
instantiation of the map struct in this case to use the available
values, avoiding the overhead of unnecessary conversions and improving
clarity. Add another map struct instantiation tailored specifically to
the separate case for an existing written extent. Remove an old comment
that no longer appears applicable to the current code.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200510155805.18808-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
|
|
ext_debug() msgs could be helpful, provided those could be enabled
without recompiling kernel and also if we could selectively enable
only required prints for case by case debugging.
So make ext_debug() implementation use pr_debug().
Also change ext_debug() to be defined with CONFIG_EXT4_DEBUG.
So EXT_DEBUG macro now mostly remain for below 3 functions.
ext4_ext_show_path/leaf/move() (whose print msgs use ext_debug()
which again could be dynamically enabled using pr_debug())
This also changes the ext_debug() to take inode as a parameter
to add inode no. in all of it's msgs.
Prints additional info like process name / pid, superblock id etc.
This also removes any explicit function names passed in ext_debug().
Since ext_debug() on it's own prints file, func and line no.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/d31dc189b0aeda9384fe7665e36da7cd8c61571f.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_ext_handle_unwritten_extents()
Replace EXT_DEBUG with __maybe_unused from inside
ext4_ext_handle_unwritten_extents() function.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/ae335b94506cd9db9d2648c1f4dd25a80f9f3ce2.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_map_blocks() has ext_debug msg early at the start of function.
We also get ext_debug msg if we could allocate a block from
ext4_ext_map_blocks(). But there is no ext_debug() msg in case of
block allocation failure. So add one along with error code.
Also add more info in ext_debug() msg like how many blocks were allocated
v/s how many were requested in ext4_ext_map_blocks().
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/1610ec2aa932396be00f9d552fe29da473ead176.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We can't fail in the truncate path without requiring an fsck.
Add work around for this by using a combination of retry loops
and the __GFP_NOFAIL flag.
From: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Anna Pendleton <pendleton@google.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200507175028.15061-1-pendleton@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
s/extnets/extents/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200503200647.154701-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If ext4_ext_convert_to_initialized() fails when called within
ext4_ext_handle_unwritten_extents(), immediately error out through the
exit point at function end. Fix the error handling in the event
ext4_ext_convert_to_initialized() returns 0, which it shouldn't do when
converting an existing extent. The current code returns the passed in
value of allocated (which is likely non-zero) while failing to set
m_flags, m_pblk, and m_len.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200430185320.23001-5-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If the call to ext4_split_convert_extents() fails in the
EXT4_GET_BLOCKS_PRE_IO case within ext4_ext_handle_unwritten_extents(),
error out through the exit point at function end rather than jumping
through an intermediate point. Fix the error handling in the event
ext4_split_convert_extents() returns 0, which it shouldn't do when
splitting an existing extent. The current code returns the passed in
value of allocated (which is likely non-zero) while failing to set
m_flags, m_pblk, and m_len.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200430185320.23001-4-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Remove the redundant code assigning values to ext4_map_blocks components
in ext4_ext_handle_unwritten_extents() for the EXT4_GET_BLOCKS_CONVERT
case, using the code at the function exit instead. Clean up and reorder
that code to eliminate more redundancy and improve readability.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200430185320.23001-3-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There's no call to ext4_map_blocks() in the current ext4 code with a
flags argument that combines EXT4_GET_BLOCKS_CONVERT and
EXT4_GET_BLOCKS_ZERO. Remove the code that corresponds to this case
from ext4_ext_handle_unwritten_extents().
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200430185320.23001-2-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Don't ignore return values from ext4_ext_dirty, since the errors
indicate valid failures below Ext4. In all of the other instances of
ext4_ext_dirty calls, the error return value is handled in some
way. This patch makes those remaining couple of places to handle
ext4_ext_dirty errors as well. In case of ext4_split_extent_at(), the
ignorance of return value is intentional. The reason is that we are
already in error path and there isn't much we can do if ext4_ext_dirty
returns error. This patch adds a comment for that case explaining why
we ignore the return value.
In the longer run, we probably should
make sure that errors from other mark_dirty routines are handled as
well.
Ran gce-xfstests smoke tests and verified that there were no
regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200427013438.219117-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_mark_inode_dirty() can fail for real reasons. Ignoring its return
value may lead ext4 to ignore real failures that would result in
corruption / crashes. Harden ext4_mark_inode_dirty error paths to fail
as soon as possible and return errors to the caller whenever
appropriate.
One of the possible scnearios when this bug could affected is that
while creating a new inode, its directory entry gets added
successfully but while writing the inode itself mark_inode_dirty
returns error which is ignored. This would result in inconsistency
that the directory entry points to a non-existent inode.
Ran gce-xfstests smoke tests and verified that there were no
regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200427013438.219117-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The eofblocks code was removed in the 5.7 release by "ext4: remove
EOFBLOCKS_FL and associated code" (4337ecd1fe99). The ext4_map_blocks()
flag used to trigger it can now be removed as well.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200415203140.30349-2-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We do not want to create initialized extents beyond end of file because
for e2fsck it is impossible to distinguish them from a case of corrupted
file size / extent tree and so it complains like:
Inode 12, i_size is 147456, should be 163840. Fix? no
Code in ext4_ext_convert_to_initialized() and
ext4_split_convert_extents() try to make sure it does not create
initialized extents beyond inode size however they check against
inode->i_size which is wrong. They should instead check against
EXT4_I(inode)->i_disksize which is the current inode size on disk.
That's what e2fsck is going to see in case of crash before all dirty
data is written. This bug manifests as generic/456 test failure (with
recent enough fstests where fsx got fixed to properly pass
FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock
mount option.
CC: stable@vger.kernel.org
Fixes: 21ca087a3891 ("ext4: Do not zero out uninitialized extents beyond i_size")
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20200331105016.8674-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Using a separate function, ext4_set_errno() to set the errno is
problematic because it doesn't do the right thing once
s_last_error_errorcode is non-zero. It's also less racy to set all of
the error information all at once. (Also, as a bonus, it shrinks code
size slightly.)
Link: https://lore.kernel.org/r/20200329020404.686965-1-tytso@mit.edu
Fixes: 878520ac45f9 ("ext4: save the error code which triggered...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We can use the variable allocated_clusters rather than map_from_clusters
to control reserved block/cluster accounting in ext4_ext_map_blocks.
This eliminates a variable and associated code and improves readability
a little.
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200311205125.25061-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Now that the eofblocks code has been removed, we don't need to assign
0 to err before calling ext4_ext_insert_extent() since it will assign
a return value to ret anyway. The variable free_on_err can be
eliminated and replaced by a reference to allocated_clusters which
clearly conveys the idea that newly allocated blocks should be freed
when recovering from an extent insertion failure. The error handling
code itself should be restructured so that it errors out immediately on
an insertion failure in the case where no new blocks have been allocated
(bigalloc) rather than proceeding further into the mapping code. The
initializer for fb_flags can also be rearranged for improved
readability. Finally, insert a missing space in nearby code.
No known bugs are addressed by this patch - it's simply a cleanup.
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200311205033.25013-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
