summaryrefslogtreecommitdiff
path: root/fs/ext4/indirect.c
AgeCommit message (Collapse)AuthorFilesLines
2021-08-31ext4: Support for checksumming from journal triggersJan Kara1-5/+10
JBD2 layer support triggers which are called when journaling layer moves buffer to a certain state. We can use the frozen trigger, which gets called when buffer data is frozen and about to be written out to the journal, to compute block checksums for some buffer types (similarly as does ocfs2). This avoids unnecessary repeated recomputation of the checksum (at the cost of larger window where memory corruption won't be caught by checksumming) and is even necessary when there are unsynchronized updaters of the checksummed data. So add superblock and journal trigger type arguments to ext4_journal_get_write_access() and ext4_journal_get_create_access() so that frozen triggers can be set accordingly. Also add inode argument to ext4_walk_page_buffers() and all the callbacks used with that function for the same purpose. This patch is mostly only a change of prototype of the above mentioned functions and a few small helpers. Real checksumming will come later. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-10ext4: fix various seppling typosBhaskar Chowdhury1-1/+1
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/cover.1616840203.git.unixbhaskar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-03ext4: use ASSERT() to replace J_ASSERT()Chunguang Xu1-2/+2
There are currently multiple forms of assertion, such as J_ASSERT(). J_ASEERT() is provided for the jbd module, which is a public module. Maybe we should use custom ASSERT() like other file systems, such as xfs, which would be better. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/1604764698-4269-1-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: use ext4_sb_bread() instead of sb_bread()zhangyi (F)1-3/+3
We have already remove open codes that invoke helpers provide by fs/buffer.c in all places reading metadata buffers. This patch switch to use ext4_sb_bread() to replace all sb_bread() helpers, which is ext4_read_bh() helper back end. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20200924073337.861472-7-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: use common helpers in all places reading metadata bufferszhangyi (F)1-1/+1
Revome all open codes that read metadata buffers, switch to use ext4_read_bh_*() common helpers. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Suggested-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200924073337.861472-4-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: add trace exit in exception path.Zhang Qilong1-1/+2
Missing trace exit in exception path of ext4_sync_file and ext4_ind_map_blocks. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20200921124738.23352-1-zhangqilong3@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: delete duplicated words + other fixesRandy Dunlap1-1/+1
Delete repeated words in fs/ext4/. {the, this, of, we, after} Also change spelling of "xttr" in inline.c to "xattr" in 2 places. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200805024850.12129-1-rdunlap@infradead.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-19ext4: limit the length of per-inode prealloc listbrookxu1-1/+1
In the scenario of writing sparse files, the per-inode prealloc list may be very long, resulting in high overhead for ext4_mb_use_preallocated(). To circumvent this problem, we limit the maximum length of per-inode prealloc list to 512 and allow users to modify it. After patching, we observed that the sys ratio of cpu has dropped, and the system throughput has increased significantly. We created a process to write the sparse file, and the running time of the process on the fixed kernel was significantly reduced, as follows: Running time on unfixed kernel: [root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat real 0m2.051s user 0m0.008s sys 0m2.026s Running time on fixed kernel: [root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat real 0m0.471s user 0m0.004s sys 0m0.395s Signed-off-by: Chunguang Xu <brookxu@tencent.com> Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-18ext4: change to use fallthrough macroShijie Luo1-6/+6
Change to use fallthrough macro in switch case. Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200810114435.24182-1-luoshijie1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-07ext4: check journal inode extents more carefullyJan Kara1-4/+2
Currently, system zones just track ranges of block, that are "important" fs metadata (bitmaps, group descriptors, journal blocks, etc.). This however complicates how extent tree (or indirect blocks) can be checked for inodes that actually track such metadata - currently the journal inode but arguably we should be treating quota files or resize inode similarly. We cannot run __ext4_ext_check() on such metadata inodes when loading their extents as that would immediately trigger the validity checks and so we just hack around that and special-case the journal inode. This however leads to a situation that a journal inode which has extent tree of depth at least one can have invalid extent tree that gets unnoticed until ext4_cache_extents() crashes. To overcome this limitation, track inode number each system zone belongs to (0 is used for zones not belonging to any inode). We can then verify inode number matches the expected one when verifying extent tree and thus avoid the false errors. With this there's no need to to special-case journal inode during extent tree checking anymore so remove it. Fixes: 0a944e8a6c66 ("ext4: don't perform block validity checks on the journal inode") Reported-by: Wolfgang Frisch <wolfgang.frisch@suse.com> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200728130437.7804-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-04ext4: handle ext4_mark_inode_dirty errorsHarshad Shirwadkar1-1/+3
ext4_mark_inode_dirty() can fail for real reasons. Ignoring its return value may lead ext4 to ignore real failures that would result in corruption / crashes. Harden ext4_mark_inode_dirty error paths to fail as soon as possible and return errors to the caller whenever appropriate. One of the possible scnearios when this bug could affected is that while creating a new inode, its directory entry gets added successfully but while writing the inode itself mark_inode_dirty returns error which is ignored. This would result in inconsistency that the directory entry points to a non-existent inode. Ran gce-xfstests smoke tests and verified that there were no regressions. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20200427013438.219117-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-04-02ext4: save all error info in save_error_info() and drop ext4_set_errno()Theodore Ts'o1-1/+1
Using a separate function, ext4_set_errno() to set the errno is problematic because it doesn't do the right thing once s_last_error_errorcode is non-zero. It's also less racy to set all of the error information all at once. (Also, as a bonus, it shrinks code size slightly.) Link: https://lore.kernel.org/r/20200329020404.686965-1-tytso@mit.edu Fixes: 878520ac45f9 ("ext4: save the error code which triggered...") Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-18ext4: remove ext4_{ind,ext}_calc_metadata_amount()Eric Biggers1-26/+0
Remove the ext4_ind_calc_metadata_amount() and ext4_ext_calc_metadata_amount() functions, which have been unused since commit 71d4f7d03214 ("ext4: remove metadata reservation checks"). Also remove the i_da_metadata_calc_last_lblock and i_da_metadata_calc_len fields from struct ext4_inode_info, as these were only used by these removed functions. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20191231180444.46586-2-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz>
2019-11-06ext4: Reserve revoke credits for freed blocksJan Kara1-4/+8
So far we have reserved only relatively high fixed amount of revoke credits for each transaction. We over-reserved by large amount for most cases but when freeing large directories or files with data journalling, the fixed amount is not enough. In fact the worst case estimate is inconveniently large (maximum extent size) for freeing of one extent. We fix this by doing proper estimate of the amount of blocks that need to be revoked when removing blocks from the inode due to truncate or hole punching and otherwise reserve just a small amount of revoke credits for each transaction to accommodate freeing of xattrs block or so. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-23-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-06ext4: Provide function to handle transaction restartsJan Kara1-39/+54
Provide ext4_journal_ensure_credits_fn() function to ensure transaction has given amount of credits and call helper function to prepare for restarting a transaction. This allows to remove some boilerplate code from various places, add proper error handling for the case where transaction extension or restart fails, and reduces following changes needed for proper revoke record reservation tracking. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-10-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-06ext4: Avoid unnecessary revokes in ext4_alloc_branch()Jan Kara1-9/+19
Error cleanup path in ext4_alloc_branch() calls ext4_forget() on freshly allocated indirect blocks with 'metadata' set to 1. This results in generating revoke records for these blocks. However this is unnecessary as the freed blocks are only allocated in the current transaction and thus they will never be journalled. Make this cleanup path similar to e.g. cleanup in ext4_splice_branch() and use ext4_free_blocks() to handle block forgetting by passing EXT4_FREE_BLOCKS_FORGET and not EXT4_FREE_BLOCKS_METADATA to ext4_free_blocks(). This also allows allocating transaction not to reserve any credits for revoke records. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-9-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-06-19ext4: clean up kerneldoc warnigns when building with W=1Theodore Ts'o1-14/+8
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-23ext4: cleanup bh release code in ext4_ind_remove_space()zhangyi (F)1-25/+22
Currently, we are releasing the indirect buffer where we are done with it in ext4_ind_remove_space(), so we can see the brelse() and BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we may probably forget to release the buffer some day. This patch cleans up the code by putting of the code which releases the buffers to the end of the function. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-03-23ext4: brelse all indirect buffer in ext4_ind_remove_space()zhangyi (F)1-4/+8
All indirect buffers get by ext4_find_shared() should be released no mater the branch should be freed or not. But now, we forget to release the lower depth indirect buffers when removing space from the same higher depth indirect block. It will lead to buffer leak and futher more, it may lead to quota information corruption when using old quota, consider the following case. - Create and mount an empty ext4 filesystem without extent and quota features, - quotacheck and enable the user & group quota, - Create some files and write some data to them, and then punch hole to some files of them, it may trigger the buffer leak problem mentioned above. - Disable quota and run quotacheck again, it will create two new aquota files and write the checked quota information to them, which probably may reuse the freed indirect block(the buffer and page cache was not freed) as data block. - Enable quota again, it will invoke vfs_load_quota_inode()->invalidate_bdev() to try to clean unused buffers and pagecache. Unfortunately, because of the buffer of quota data block is still referenced, quota code cannot read the up to date quota info from the device and lead to quota information corruption. This problem can be reproduced by xfstests generic/231 on ext3 file system or ext4 file system without extent and quota features. This patch fix this problem by releasing the missing indirect buffers, in ext4_ind_remove_space(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org
2019-02-21ext4: annotate more implicit fall throughsMathieu Malaterre1-0/+6
There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings (W=1). Fix them up. This commit remove the following warnings: fs/ext4/indirect.c:1182:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1188:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1432:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1440:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2018-05-13ext4: fix hole length detection in ext4_ind_map_blocks()Jan Kara1-4/+10
When ext4_ind_map_blocks() computes a length of a hole, it doesn't count with the fact that mapped offset may be somewhere in the middle of the completely empty subtree. In such case it will return too large length of the hole which then results in lseek(SEEK_DATA) to end up returning an incorrect offset beyond the end of the hole. Fix the problem by correctly taking offset within a subtree into account when computing a length of a hole. Fixes: facab4d9711e7aa3532cb82643803e8f1b9518e8 CC: stable@vger.kernel.org Reported-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-22ext4: call journal revoke when freeing ea_inode blocksTahsin Erdogan1-1/+2
ea_inode contents are treated as metadata, that's why it is journaled during initial writes. Failing to call revoke during freeing could cause user data to be overwritten with original ea_inode contents during journal replay. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-05-13ext4: refactor direct IO codeJan Kara1-127/+0
Currently ext4 direct IO handling is split between ext4_ext_direct_IO() and ext4_ind_direct_IO(). However the extent based function calls into the indirect based one for some cases and for example it is not able to handle file extending. Previously it was not also properly handling retries in case of ENOSPC errors. With DAX things would get even more contrieved so just refactor the direct IO code and instead of indirect / extent split do the split to read vs writes. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-03-10ext4: return hole from ext4_map_blocks()Jan Kara1-2/+17
Currently, ext4_map_blocks() just returns 0 when it finds a hole and allocation is not requested. However we have all the information available to tell how large the hole actually is and there are callers of ext4_map_blocks() which would save some block-by-block hole iteration if they knew this information. So fill in struct ext4_map_blocks even for holes with the information we have. We keep returning 0 for holes to maintain backward compatibility of the function. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-03-09ext4: rename and split get blocks functionsJan Kara1-5/+5
Rename ext4_get_blocks_write() to ext4_get_blocks_unwritten() to better describe what it does. Also split out get blocks functions for direct IO. Later we move functionality from _ext4_get_blocks() there. There's no functional change in this patch. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-17ext4: clean up feature test macros with predicate functionsDarrick J. Wong1-2/+1
Create separate predicate functions to test/set/clear feature flags, thereby replacing the wordy old macros. Furthermore, clean out the places where we open-coded feature tests. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2015-10-17ext4: call out CRC and corruption errors with specific error codesDarrick J. Wong1-1/+1
Instead of overloading EIO for CRC errors and corrupt structures, return the same error codes that XFS returns for the same issues. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-09-09dax: move DAX-related functions to a new headerMatthew Wilcox1-0/+1
In order to handle the !CONFIG_TRANSPARENT_HUGEPAGES case, we need to return VM_FAULT_FALLBACK from the inlined dax_pmd_fault(), which is defined in linux/mm.h. Given that we don't want to include <linux/mm.h> in <linux/fs.h>, the easiest solution is to move the DAX-related functions to a new header, <linux/dax.h>. We could also have moved VM_FAULT_* definitions to a new header, or a different header that isn't quite such a boil-the-ocean header as <linux/mm.h>, but this felt like the best option. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-22ext4: don't retry file block mapping on bigalloc fs with non-extent fileDarrick J. Wong1-1/+1
ext4 isn't willing to map clusters to a non-extent file. Don't signal this with an out of space error, since the FS will retry the allocation (which didn't fail) forever. Instead, return EUCLEAN so that the operation will fail immediately all the way back to userspace. (The fix is either to run e2fsck -E bmap2extent, or to chattr +e the file.) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-06-21ext4: prevent ext4_quota_write() from failing due to ENOSPCTheodore Ts'o1-0/+2
In order to prevent quota block tracking to be inaccurate when ext4_quota_write() fails with ENOSPC, we make two changes. The quota file can now use the reserved block (since the quota file is arguably file system metadata), and ext4_quota_write() now uses ext4_should_retry_alloc() to retry the block allocation after a commit has completed and released some blocks for allocation. This fixes failures of xfstests generic/270: Quota error (device vdc): write_blk: dquota write failed Quota error (device vdc): qtree_write_dquot: Error -28 occurred while creating quota Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-04-24direct-io: only inc/dec inode->i_dio_count for file systemsJens Axboe1-3/+3
do_blockdev_direct_IO() increments and decrements the inode ->i_dio_count for each IO operation. It does this to protect against truncate of a file. Block devices don't need this sort of protection. For a capable multiqueue setup, this atomic int is the only shared state between applications accessing the device for O_DIRECT, and it presents a scaling wall for that. In my testing, as much as 30% of system time is spent incrementing and decrementing this value. A mixed read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with better latencies too. Before: clat percentiles (usec): | 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34], | 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35], | 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80], | 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155], | 99.99th=[ 165] After: clat percentiles (usec): | 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149], | 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171], | 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270], | 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422], | 99.99th=[ 438] In other setups, Robert Elliott reported seeing good performance improvements: https://lkml.org/lkml/2015/4/3/557 The more applications accessing the device, the worse it gets. Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells do_blockdev_direct_IO() that it need not worry about incrementing or decrementing the inode i_dio_count for this caller. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Elliott, Robert (Server Storage) <elliott@hp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-12direct_IO: use iov_iter_rw() instead of rw everywhereOmar Sandoval1-5/+5
The rw parameter to direct_IO is redundant with iov_iter->type, and treated slightly differently just about everywhere it's used: some users do rw & WRITE, and others do rw == WRITE where they should be doing a bitwise check. Simplify this with the new iov_iter_rw() helper, which always returns either READ or WRITE. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-12Remove rw from dax_{do_,}io()Omar Sandoval1-2/+2
And use iov_iter_rw() instead. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-12Remove rw from {,__,do_}blockdev_direct_IO()Omar Sandoval1-5/+6
Most filesystems call through to these at some point, so we'll start here. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-12Merge branch 'iocb' into for-nextAl Viro1-1/+1
2015-03-26fs: move struct kiocb to fs.hChristoph Hellwig1-1/+1
struct kiocb now is a generic I/O container, so move it to fs.h. Also do a #include diet for aio.h while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-23Merge tag 'ext4_for_linus' of ↵Linus Torvalds1-34/+71
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes. We also reserved code points for encryption and read-only images (for which the implementation is mostly just the reserved code point for a read-only feature :-)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix indirect punch hole corruption ext4: ignore journal checksum on remount; don't fail ext4: remove duplicate remount check for JOURNAL_CHECKSUM change ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize ext4: support read-only images ext4: change to use setup_timer() instead of init_timer() ext4: reserve codepoints used by the ext4 encryption feature jbd2: complain about descriptor block checksum errors
2015-02-17ext4: add DAX functionalityRoss Zwisler1-5/+13
This is a port of the DAX functionality found in the current version of ext2. [matthew.r.wilcox@intel.com: heavily tweaked] [akpm@linux-foundation.org: remap_pages went away] Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-15ext4: fix indirect punch hole corruptionOmar Sandoval1-34/+71
Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2014-09-05ext4: prepare to drop EXT4_STATE_DELALLOC_RESERVEDTheodore Ts'o1-1/+5
The EXT4_STATE_DELALLOC_RESERVED flag was originally implemented because it was too hard to make sure the mballoc and get_block flags could be reliably passed down through all of the codepaths that end up calling ext4_mb_new_blocks(). Since then, we have mb_flags passed down through most of the code paths, so getting rid of EXT4_STATE_DELALLOC_RESERVED isn't as tricky as it used to. This commit plumbs in the last of what is required, and then adds a WARN_ON check to make sure we haven't missed anything. If this passes a full regression test run, we can then drop EXT4_STATE_DELALLOC_RESERVED. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2014-09-05ext4: pass allocation_request struct to ext4_(alloc,splice)_branchTheodore Ts'o1-44/+38
Instead of initializing the allocation_request structure in ext4_alloc_branch(), set it up in ext4_ind_map_blocks(), and then pass it to ext4_alloc_branch() and ext4_splice_branch(). This allows ext4_ind_map_blocks to pass flags in the allocation request structure without having to add Yet Another argument to ext4_alloc_branch(). Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2014-07-15ext4: fix punch hole on files with indirect mappingLukas Czerner1-79/+202
Currently punch hole code on files with direct/indirect mapping has some problems which may lead to a data loss. For example (from Jan Kara): fallocate -n -p 10240000 4096 will punch the range 10240000 - 12632064 instead of the range 1024000 - 10244096. Also the code is a bit weird and it's not using infrastructure provided by indirect.c, but rather creating it's own way. This patch fixes the issues as well as making the operation to run 4 times faster from my testing (punching out 60GB file). It uses similar approach used in ext4_ind_truncate() which takes advantage of ext4_free_branches() function. Also rename the ext4_free_hole_blocks() to something more sensible, like the equivalent we have for extent mapped files. Call it ext4_ind_remove_space(). This has been tested mostly with fsx and some xfstests which are testing punch hole but does not require unwritten extents which are not supported with direct/indirect mapping. Not problems showed up even with 1024k block size. CC: stable@vger.kernel.org Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-06-26ext4: Fix hole punching for files with indirect blocksJan Kara1-2/+10
Hole punching code for files with indirect blocks wrongly computed number of blocks which need to be cleared when traversing the indirect block tree. That could result in punching more blocks than actually requested and thus effectively cause a data loss. For example: fallocate -n -p 10240000 4096 will punch the range 10240000 - 12632064 instead of the range 1024000 - 10244096. Fix the calculation. CC: stable@vger.kernel.org Fixes: 8bad6fc813a3a5300f51369c39d315679fd88c72 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-06-26ext4: Fix block zeroing when punching holes in indirect block filesJan Kara1-2/+2
free_holes_block() passed local variable as a block pointer to ext4_clear_blocks(). Thus ext4_clear_blocks() zeroed out this local variable instead of proper place in inode / indirect block. We later zero out proper place in inode / indirect block but don't dirty the inode / buffer again which can lead to subtle issues (some changes e.g. to inode can be lost). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-06-16ext4: Fix buffer double free in ext4_alloc_branch()Jan Kara1-1/+7
Error recovery in ext4_alloc_branch() calls ext4_forget() even for buffer corresponding to indirect block it did not allocate. This leads to brelse() being called twice for that buffer (once from ext4_forget() and once from cleanup in ext4_ind_map_blocks()) leading to buffer use count misaccounting. Eventually (but often much later because there are other users of the buffer) we will see messages like: VFS: brelse: Trying to free free buffer Another manifestation of this problem is an error: JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh); inconsistent data on disk The fix is easy - don't forget buffer we did not allocate. Also add an explanatory comment because the indexing at ext4_alloc_branch() is somewhat subtle. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-05-07switch {__,}blockdev_direct_IO() to iov_iterAl Viro1-4/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-07get rid of pointless iov_length() in ->direct_IO()Al Viro1-1/+1
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-07ext4: switch the guts of ->direct_IO() to iov_iterAl Viro1-8/+7
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28ext4: isolate ext4_extents.h fileZheng Liu1-1/+0
After applied the commit (4a092d73), we have reduced the number of source files that need to #include ext4_extents.h. But we can do better. This commit defines ext4_zeroout_es() in extents.c and move EXT_MAX_BLOCKS into ext4.h in order not to include ext4_extents.h in indirect.c and ioctl.c. Meanwhile we just need to include this file in extent_status.c when ES_AGGRESSIVE_TEST is defined. Otherwise, this commit removes a duplicated declaration in trace/events/ext4.h. After applied this patch, we just need to include ext4_extents.h file in {super,migrate,move_extents,extents}.c, and it is easy for us to define a new extent disk layout. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>