summaryrefslogtreecommitdiff
path: root/fs/f2fs
AgeCommit message (Collapse)AuthorFilesLines
2014-10-07f2fs: support volatile operations for transient dataJaegeuk Kim4-2/+25
This patch adds support for volatile writes which keep data pages in memory until f2fs_evict_inode is called by iput. For instance, we can use this feature for the sqlite database as follows. While supporting atomic writes for main database file, we can keep its journal data temporarily in the page cache by the following sequence. 1. open -> ioctl(F2FS_IOC_START_VOLATILE_WRITE); 2. writes : keep all the data in the page cache. 3. flush to the database file with atomic writes a. ioctl(F2FS_IOC_START_ATOMIC_WRITE); b. writes c. ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE); 4. close -> drop the cached data Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-10-07f2fs: support atomic writesJaegeuk Kim8-5/+139
This patch introduces a very limited functionality for atomic write support. In order to support atomic write, this patch adds two ioctls: o F2FS_IOC_START_ATOMIC_WRITE o F2FS_IOC_COMMIT_ATOMIC_WRITE The database engine should be aware of the following sequence. 1. open -> ioctl(F2FS_IOC_START_ATOMIC_WRITE); 2. writes : all the written data will be treated as atomic pages. 3. commit -> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE); : this flushes all the data blocks to the disk, which will be shown all or nothing by f2fs recovery procedure. 4. repeat to #2. The IO pattens should be: ,- START_ATOMIC_WRITE ,- COMMIT_ATOMIC_WRITE CP | D D D D D D | FSYNC | D D D D | FSYNC ... `- COMMIT_ATOMIC_WRITE Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-10-06f2fs: remove unused return valueJaegeuk Kim1-3/+2
Don't return any value without any usage. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-10-01f2fs: clean up f2fs_ioctl functionsJaegeuk Kim1-63/+75
This patch cleans up f2fs_ioctl functions for better readability. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-10-01f2fs: potential shift wrapping buf in f2fs_trim_fs()Dan Carpenter1-1/+1
My static checker complains that segment is a u64 but only the lower 31 bits can be used before we hit a shift wrapping bug. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-10-01f2fs: call f2fs_unlock_op after error was handledJaegeuk Kim3-21/+35
This patch relocates f2fs_unlock_op in every directory operations to be called after any error was processed. Otherwise, the checkpoint can be entered with valid node ids without its dentry when -ENOSPC is occurred. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-10-01f2fs: check the use of macros on block counts and addressesJaegeuk Kim6-103/+81
This patch cleans up the existing and new macros for readability. Rule is like this. ,-----------------------------------------> MAX_BLKADDR -, | ,------------- TOTAL_BLKS ----------------------------, | | | | ,- seg0_blkaddr ,----- sit/nat/ssa/main blkaddress | block | | (SEG0_BLKADDR) | | | | (e.g., MAIN_BLKADDR) | address 0..x................ a b c d ............................. | | global seg# 0...................... m ............................. | | | | `------- MAIN_SEGS -----------' `-------------- TOTAL_SEGS ---------------------------' | | seg# 0..........xx.................. = Note = o GET_SEGNO_FROM_SEG0 : blk address -> global segno o GET_SEGNO : blk address -> segno o START_BLOCK : segno -> starting block address Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-10-01f2fs: refactor flush_nat_entries to remove costly reorganizing opsJaegeuk Kim3-159/+162
Previously, f2fs tries to reorganize the dirty nat entries into multiple sets according to its nid ranges. This can improve the flushing nat pages, however, if there are a lot of cached nat entries, it becomes a bottleneck. This patch introduces a new set management flow by removing dirty nat list and adding a series of set operations when the nat entry becomes dirty. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-10-01f2fs: introduce FITRIM in f2fs_ioctlJaegeuk Kim5-13/+134
This patch introduces FITRIM in f2fs_ioctl. In this case, f2fs will issue small discards and prefree discards as many as possible for the given area. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-10-01f2fs: introduce cp_control structureJaegeuk Kim5-15/+37
This patch add a new data structure to control checkpoint parameters. Currently, it presents the reason of checkpoint such as is_umount and normal sync. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: use more free segments until SSR is activatedJaegeuk Kim1-2/+4
Previously, f2fs activates SSR if the # of free segments reaches to the # of overprovisioned segments. In this case, SSR starts to use dirty segments only, so that the overprovisoned space cannot be selected for new data. This means that we have no chance to utilizae the overprovisioned space at all. This patch fixes that by allowing LFS allocations until the # of free segments reaches to the last threshold, reserved space. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: change the ipu_policy option to enable combinationsJaegeuk Kim2-24/+17
This patch changes the ipu_policy setting to use any combination of orthogonal policies. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: fix to search whole dirty segmap when get_victimChao Yu1-2/+2
In ->get_victim we get max_search value from dirty_i->nr_dirty without protection of seglist_lock, after that, nr_dirty can be increased/decreased before we hold seglist_lock lock. Then in main loop we attempt to traverse all dirty section one time to find victim section, but it's not accurate to use max_search as the total loop count, because we might lose checking several sections or check sections redundantly for the case of nr_dirty are increased or decreased previously. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: fix to clean previous mount option when remount_fsChao Yu1-0/+3
In manual of mount, we descript remount as below: "mount -o remount,rw /dev/foo /dir After this call all old mount options are replaced and arbitrary stuff from fstab is ignored, except the loop= option which is internally generated and maintained by the mount command." Previously f2fs do not clear up old mount options when remount_fs, so we have no chance of disabling previous option (e.g. flush_merge). Fix it. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: skip punching hole in special conditionChao Yu1-0/+7
Now punching hole in directory is not supported in f2fs, so let's limit file type in punch_hole(). In addition, in punch_hole if offset is exceed file size, we should skip punching hole. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: support large sector sizeChao Yu4-14/+22
Block size in f2fs is 4096 bytes, so theoretically, f2fs can support 4096 bytes sector device at maximum. But now f2fs only support 512 bytes size sector, so block device such as zRAM which uses page cache as its block storage space will not be mounted successfully as mismatch between sector size of zRAM and sector size of f2fs supported. In this patch we support large sector size in f2fs, so block device with sector size of 512/1024/2048/4096 bytes can be supported in f2fs. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: fix to truncate blocks past EOF in ->setattrChao Yu1-5/+12
By using FALLOC_FL_KEEP_SIZE in ->fallocate of f2fs, we can fallocate block past EOF without changing i_size of inode. These blocks past EOF will not be truncated in ->setattr as we truncate them only when change the file size. We should give a chance to truncate blocks out of filesize in setattr(). Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: update i_size when __allocate_data_blockJaegeuk Kim1-0/+8
The f2fs_direct_IO uses __allocate_data_block, but inside the allocation path, we should update i_size at the changed time to update its inode page. Otherwise, we can get wrong i_size after roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: use MAX_BIO_BLOCKS(sbi)Jaegeuk Kim5-9/+8
This patch cleans up a simple macro. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: remove redundant operation during roll-forward recoveryJaegeuk Kim2-25/+22
If same data is updated multiple times, we don't need to redo whole the operations. Let's just update the lastest one. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: do not skip latest inode informationJaegeuk Kim1-1/+10
In f2fs_sync_file, if there is no written appended writes, it skips to write its node blocks. But, if there is up-to-date inode page, we should write it to update its metadata during the roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: fix roll-forward missing scenariosJaegeuk Kim1-11/+60
We can summarize the roll forward recovery scenarios as follows. [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) -> Update the latest inode(x). 2. inode(x) | CP | inode(F) | dnode(F) -> No problem. 3. inode(x) | CP | dnode(F) | inode(x) -> Recover to the latest dnode(F), and drop the last inode(x) 4. inode(x) | CP | dnode(F) | inode(F) -> No problem. 5. CP | inode(x) | dnode(F) -> The inode(DF) was missing. Should drop this dnode(F). 6. CP | inode(DF) | dnode(F) -> No problem. 7. CP | dnode(F) | inode(DF) -> If f2fs_iget fails, then goto next to find inode(DF). 8. CP | dnode(F) | inode(x) -> If f2fs_iget fails, then goto next to find inode(DF). But it will fail due to no inode(DF). So, this patch adds some missing points such as #1, #5, #7, and #8. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: fix conditions to remain recovery information in f2fs_sync_fileJaegeuk Kim5-40/+56
This patch revisited whole the recovery information during the f2fs_sync_file. In this patch, there are three information to make a decision. a) IS_CHECKPOINTED, /* is it checkpointed before? */ b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */ c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */ And, the scenarios for our rule are based on: [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) 2. inode(x) | CP | inode(F) | dnode(F) 3. inode(x) | CP | dnode(F) | inode(x) | inode(F) 4. inode(x) | CP | dnode(F) | inode(F) 5. CP | inode(x) | dnode(F) | inode(DF) 6. CP | inode(DF) | dnode(F) 7. CP | dnode(F) | inode(DF) 8. CP | dnode(F) | inode(x) | inode(DF) For example, #3, the three conditions should be changed as follows. inode(x) | CP | dnode(F) | inode(x) | inode(F) a) x o o o o b) x x x x o c) x o o x o If f2fs_sync_file stops ------^, it should write inode(F) --------------^ So, the need_inode_block_update should return true, since c) get_nat_flag(e, HAS_LAST_FSYNC), is false. For example, #8, CP | alloc | dnode(F) | inode(x) | inode(DF) a) o x x x x b) x x x o c) o o x o If f2fs_sync_file stops -------^, it should write inode(DF) --------------^ Note that, the roll-forward policy should follow this rule, which means, if there are any missing blocks, we doesn't need to recover that inode. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: introduce a flag to represent each nat entry informationJaegeuk Kim2-10/+31
This patch introduces a flag in the nat entry structure to merge various information such as checkpointed and fsync_done marks. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: use meta_inode cache to improve roll-forward speedJaegeuk Kim4-42/+58
Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16f2fs: fix double lock for inode page during roll-foward recoveryJaegeuk Kim1-7/+21
If the inode is same and its data index are needed to truncate, we can fall into double lock for its inode page via get_dnode_of_data. Error case is like this. 1. write data 1, 2, 3, 4, 5 in inode #4. 2. write data 100, 102, 103, 104, 105 in dnode #6 of inode #4. 3. sync 4. update data 100->106 in dnode #6. 5. fsync inode #4. 6. power-cut -> Then, 1. go back to #3's checkpoint 2. in do_recover_data, get_dnode_of_data() gets inode #4. 3. detect 100->106 in dnode #6. 4. check_index_in_prev_nodes tries to truncate 100 in dnode #6. 5. to trigger truncate_hole, get_dnode_of_data should grab inode #4. 6. detect *kernel hang* This patch should resolve that bug. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16f2fs: fix a race condition in next_free_nidHuang Ying1-2/+4
The nm_i->fcnt checking is executed before spin_lock, so if another thread delete the last free_nid from the list, the wrong nid may be gotten. So fix the race condition by moving the nm_i->fnct checking into spin_lock. Signed-off-by: Huang, Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16f2fs: use nm_i->next_scan_nid as default for next_free_nidHuang Ying1-1/+2
Now, if there is no free nid in nm_i->free_nid_list, 0 may be saved into next_free_nid of checkpoint, this may cause useless scanning for next mount. nm_i->next_scan_nid should be a better default value than 0. Signed-off-by: Huang, Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16f2fs: give an option to enable in-place-updates during fsync to usersJaegeuk Kim5-9/+18
If user wrote F2FS_IPU_FSYNC:4 in /sys/fs/f2fs/ipu_policy, f2fs_sync_file only starts to try in-place-updates. And, if the number of dirty pages is over /sys/fs/f2fs/min_fsync_blocks, it keeps out-of-order manner. Otherwise, it triggers in-place-updates. This may be used by storage showing very high random write performance. For example, it can be used when, Seq. writes (Data) + wait + Seq. writes (Node) is pretty much slower than, Rand. writes (Data) Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16f2fs: expand counting dirty pages in the inode page cacheJaegeuk Kim7-26/+39
Previously f2fs only counts dirty dentry pages, but there is no reason not to expand the scope. This patch changes the names on the management of dirty pages and to count dirty pages in each inode info as well. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11f2fs: remove lengthy inode->i_inoJaegeuk Kim1-7/+8
This patch is to remove lengthy name by adding a new variable. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: fix negative value for lseek offsetJaegeuk Kim1-0/+2
If application throws negative value of lseek with SEEK_DATA|SEEK_HOLE, previous f2fs went into BUG_ON in get_dnode_of_data, which was reported by Tommi Rantala. He could make a simple code to detect this having: lseek(fd, -17595150933902LL, SEEK_DATA); This patch should resolve that bug. Reported-by: Tommi Rentala <tt.rantala@gmail.com> [Jaegeuk Kim: relocate the condition as suggested by Chao] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: avoid node page to be written twice in gc_node_segmentHuang Ying1-0/+6
In gc_node_segment, if node page gc is run concurrently with node page writeback, and check_valid_map and get_node_page run after page locked and before cur_valid_map is updated as below, it is possible for the page to be written twice unnecessarily. sync_node_pages try_lock_page ... check_valid_map f2fs_write_node_page ... write_node_page do_write_page allocate_data_block ... refresh_sit_entry /* update cur_valid_map */ ... ... unlock_page get_node_page ... set_page_dirty ... f2fs_put_page unlock_page This can be solved via calling check_valid_map after get_node_page again. Signed-off-by: Huang, Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: use lock-less list(llist) to simplify the flush cmd managementGu Zheng2-25/+12
We use flush cmd control to collect many flush cmds, and flush them together. In this case, we use two list to manage the flush cmds (collect and dispatch), and one spin lock is used to protect this. In fact, the lock-less list(llist) is very suitable to this case, and we use simplify this routine. - v2: -use llist_for_each_entry_safe to fix possible use-after-free issue. -remove the unused field from struct flush_cmd. Thanks for Yu's suggestion. - Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: refactor flush_sit_entries codes for reducing SIT writesChao Yu4-71/+186
In commit aec71382c681 ("f2fs: refactor flush_nat_entries codes for reducing NAT writes"), we descripte the issue as below: "Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time." Actually, we have the same problem in using SIT journal area. In this patch, firstly we will update sit journal with dirty entries as many as possible. Secondly if there is no space in sit journal, we will remove all entries in journal and walk through the whole dirty entry bitmap of sit, accounting dirty sit entries located in same SIT block to sit entry set. All entry sets are linked to list sit_entry_set in sm_info, sorted ascending order by count of entries in set. Later we flush entries in set which have fewest entries into journal as many as we can, and then flush dense set with merged entries to disk. In this way we can use sit journal area more effectively, also we will reduce SIT update, result in gaining in performance and saving lifetime of flash device. In my testing environment, it shows this patch can help to reduce SIT block update obviously. virtual machine + hard disk: fsstress -p 20 -n 400 -l 5 sit page num cp count sit pages/cp based 2006.50 1349.75 1.486 patched 1566.25 1463.25 1.070 Our latency of merging op is small when handling a great number of dirty SIT entries in flush_sit_entries: latency(ns) dirty sit count 36038 2151 49168 2123 37174 2232 Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: remove unneeded sit_i in macro SIT_BLOCK_OFFSET/START_SEGNOChao Yu2-7/+7
sit_i in macro SIT_BLOCK_OFFSET/START_SEGNO is not used, remove it. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: need fsck.f2fs if the recovery was failedJaegeuk Kim1-0/+3
If the roll-forward recovery was failed, we'd better conduct fsck.f2fs. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: handle bug cases by letting fsck.f2fs initiateJaegeuk Kim1-1/+9
This patch adds to handle corner buggy cases for fsck.f2fs. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: add BUG cases to initiate fsck.f2fsJaegeuk Kim2-5/+37
This patch replaces BUG cases with f2fs_bug_on to remain fsck.f2fs information. And it implements some void functions to initiate fsck.f2fs too. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: need fsck.f2fs when f2fs_bug_on is triggeredJaegeuk Kim11-63/+70
If any f2fs_bug_on is triggered, fsck.f2fs is needed. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: retain inconsistency information to initiate fsck.f2fsJaegeuk Kim3-0/+5
This patch adds sbi->need_fsck to conduct fsck.f2fs later. This flag can only be removed by fsck.f2fs. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-04f2fs: introduce F2FS_I_SB, F2FS_M_SB, and F2FS_P_SBJaegeuk Kim14-114/+103
This patch adds three inline functions to clean up dirty casting codes. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-02f2fs: reposition unlock_new_inode to prevent accessing invalid inodeChao Yu2-16/+6
As the race condition on the inode cache, following scenario can appear: [Thread a] [Thread b] ->f2fs_mkdir ->f2fs_add_link ->__f2fs_add_link ->init_inode_metadata failed here ->gc_thread_func ->f2fs_gc ->do_garbage_collect ->gc_data_segment ->f2fs_iget ->iget_locked ->wait_on_inode ->unlock_new_inode ->move_data_page ->make_bad_inode ->iput When we fail in create/symlink/mkdir/mknod/tmpfile, the new allocated inode should be set as bad to avoid being accessed by other thread. But in above scenario, it allows f2fs to access the invalid inode before this inode was set as bad. This patch fix the potential problem, and this issue was found by code review. change log from v1: o Add condition judgment in gc_data_segment() suggested by Changman Lee. o use iget_failed to simplify code. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-29f2fs: fix wrong casting for dentry nameJaegeuk Kim1-3/+4
The dentry name type is unsigned char *. If we don't match this type, some character codes can be changed by signed bit. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-28f2fs: simplify by using a literalDan Carpenter1-1/+1
We can make the code a bit simpler because we know that "!retry" is zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-26f2fs: truncate stale block for inline_dataJaegeuk Kim1-8/+12
This verifies to truncate any allocated blocks, offset[0], by inline_data. Not figured out, but for making sure. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-23f2fs: use macro for code readabilityChao Yu1-11/+10
This patch introduces DEF_NIDS_PER_INODE/GET_ORPHAN_BLOCKS/F2FS_CP_PACKS macro instead of numbers in code for readability. change log from v1: o fix typo pointed out by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-22f2fs: introduce need_do_checkpoint for readabilityChao Yu1-13/+21
This patch introduce need_do_checkpoint() to include numerous judgment condition for readability. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-22f2fs: fix incorrect calculation with total/free inode numChao Yu2-3/+3
Theoretically, our total inodes number is the same as total node number, but there are three node ids are reserved in f2fs, they are 0, 1 (node nid), and 2 (meta nid), and they should never be used by user, so our total/free inode number calculated in ->statfs is wrong. This patch indroduces F2FS_RESERVED_NODE_NUM and then fixes this issue by recalculating total/free inode number with the macro. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-22f2fs: remove rename and use rename2Jaegeuk Kim1-1/+0
Refer the following patch. commit 7177a9c4b509eb357cc450256bc3cf39f1a1e639 Author: Miklos Szeredi <mszeredi@suse.cz> Date: Wed Jul 23 15:15:30 2014 +0200 fs: call rename2 if exists Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>