summaryrefslogtreecommitdiff
path: root/fs/gfs2/bmap.h
AgeCommit message (Collapse)AuthorFilesLines
2023-11-06gfs2: No longer use 'extern' in function declarationsAndreas Gruenbacher1-19/+19
For non-static function declarations, external linkage is implied and the 'extern' keyword isn't needed. Some static checkers complain about the overuse of 'extern', so clean up all the function declarations. In addition, remove 'extern' from the definition of free_local_statfs_inodes(); it isn't needed there, either. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-04-18gfs2: Eliminate gfs2_trim_blocksBob Peterson1-1/+0
Function gfs2_trim_blocks is not referenced. Eliminate it. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-06-29gfs2: Clean up gfs2_unstuff_dinodeAndreas Gruenbacher1-1/+1
Split __gfs2_unstuff_inode off from gfs2_unstuff_dinode and clean up the code a little. All remaining callers now pass NULL as the page argument of gfs2_unstuff_dinode, so remove that argument. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-04-03gfs2: Replace gfs2_lblk_to_dblk with gfs2_get_extentAndreas Gruenbacher1-1/+0
We don't need two very similar functions for mapping logical blocks to physical blocks. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-04-03gfs2: Turn gfs2_extent_map into gfs2_{get,alloc}_extentAndreas Gruenbacher1-2/+4
Convert gfs2_extent_map to iomap and split it into gfs2_get_extent and gfs2_alloc_extent. Instead of hardcoding the extent size, pass it in via the extlen parameter. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-04-03gfs2: Add new gfs2_iomap_get helperAndreas Gruenbacher1-2/+4
Rename the current gfs2_iomap_get and gfs2_iomap_alloc functions to __*. Add a new gfs2_iomap_get helper that doesn't expose struct metapath. Rename gfs2_iomap_get_alloc to gfs2_iomap_alloc. Use the new helpers where they make sense. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-10-15gfs2: use iomap for buffered I/O in ordered and writeback modeChristoph Hellwig1-0/+1
Switch to using the iomap readpage and writepage helpers for all I/O in the ordered and writeback modes, and thus eliminate using buffer_heads for I/O in these cases. The journaled data mode is left untouched. (Andreas Gruenbacher: In gfs2_unstuffer_page, switch from mark_buffer_dirty to set_page_dirty instead of accidentally leaving the page / buffer clean.) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 398Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this copyrighted material is made available to anyone wishing to use modify copy or redistribute it subject to the terms and conditions of the gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 44 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08gfs2: clean_journal improperly set sd_log_flush_headBob Peterson1-0/+1
This patch fixes regressions in 588bff95c94efc05f9e1a0b19015c9408ed7c0ef. Due to that patch, function clean_journal was setting the value of sd_log_flush_head, but that's only valid if it is replaying the node's own journal. If it's replaying another node's journal, that's completely wrong and will lead to multiple problems. This patch tries to clean up the mess by passing the value of the logical journal block number into gfs2_write_log_header so the function can treat non-owned journals generically. For the local journal, the journal extent map is used for best performance. For other nodes from other journals, new function gfs2_lblk_to_dblk is called to figure it out using gfs2_iomap_get. This patch also tries to establish more consistency when passing journal block parameters by changing several unsigned int types to a consistent u32. Fixes: 588bff95c94e ("GFS2: Reduce code redundancy writing log headers") Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-06-04gfs2: Iomap cleanups and improvementsAndreas Gruenbacher1-2/+4
Clean up gfs2_iomap_alloc and gfs2_iomap_get. Document how gfs2_iomap_alloc works: it now needs to be called separately after gfs2_iomap_get where necessary; this will be used later by iomap write. Move gfs2_iomap_ops into bmap.c. Introduce a new gfs2_iomap_get_alloc helper and use it in fallocate_chunk: gfs2_iomap_begin will become unsuitable for fallocate with proper iomap write support. In gfs2_block_map and fallocate_chunk, zero-initialize struct iomap. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-01-18gfs2: Implement fallocate(FALLOC_FL_PUNCH_HOLE)Andreas Gruenbacher1-0/+1
Implement the top-level bits of punching a hole into a file. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-10-31GFS2: Implement iomap for block_mapBob Peterson1-0/+4
This patch implements iomap for block mapping, and switches the block_map function to use it under the covers. The additional IOMAP_F_BOUNDARY iomap flag indicates when iomap has reached a "metadata boundary" and fetching the next mapping is likely to incur an additional I/O. This flag is used for setting the bh buffer boundary flag. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2014-03-03GFS2: Clean up journal extent mappingSteven Whitehouse1-0/+2
This patch fixes a long standing issue in mapping the journal extents. Most journals will consist of only a single extent, and although the cache took account of that by merging extents, it did not actually map large extents, but instead was doing a block by block mapping. Since the journal was only being mapped on mount, this was not normally noticeable. With the updated code, it is now possible to use the same extent mapping system during journal recovery (which will be added in a later patch). This will allow checking of the integrity of the journal before any reply of the journal content is attempted. For this reason the code is moving to bmap.c, since it will be used more widely in due course. An exercise left for the reader is to compare the new function gfs2_map_journal_extents() with gfs2_write_alloc_required() Additionally, should there be a failure, the error reporting is also updated to show more detail about what went wrong. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-09-20GFS2: New truncate sequenceSteven Whitehouse1-9/+11
This updates GFS2's truncate code to use the new truncate sequence correctly. This is a stepping stone to being able to remove ip->i_disksize in favour of using i_size everywhere now that the two sizes are always identical. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Christoph Hellwig <hch@lst.de>
2010-07-29GFS2: Simplify gfs2_write_alloc_requiredBob Peterson1-1/+1
Function gfs2_write_alloc_required always returned zero as its return code. Therefore, it doesn't need to return a return code at all. Given that, we can use the return value to return whether or not the dinode needs block allocations rather than passing that value in, which in turn simplifies a bunch of error checking. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-01-05GFS2: Streamline alloc calculations for writesSteven Whitehouse1-4/+30
This patch removes some unused code, and make the calculation of the number of blocks required conditional in order to reduce the number of times this (potentially expensive) calculation is done. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove function gfs2_get_blockBob Peterson1-1/+1
This patch is just a cleanup. Function gfs2_get_block() just calls function gfs2_block_map reversing the last two parameters. By reversing the parameters, gfs2_block_map() may be called directly and function gfs2_get_block may be eliminated altogether. Since this function is done for every block operation, this streamlines the code and makes it a little bit more efficient. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-20[GFS2] Fix bmap to map extents properlySteven Whitehouse1-1/+1
This fix means that bmap will map extents of the length requested by the VFS rather than guessing at it, or just mapping one block at a time. The other callers of gfs2_block_map are audited to ensure they send the correct max extent lengths (i.e. set bh->b_size correctly). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-19[GFS2] Map multiple blocks at once where possibleSteven Whitehouse1-1/+1
This is a tidy up of the GFS2 bmap code. The main change is that the bh is passed to gfs2_block_map allowing the flags to be set directly rather than having to repeat that code several times in ops_address.c. At the same time, the extent mapping code from gfs2_extent_map has been moved into gfs2_block_map. This allows all calls to gfs2_block_map to map extents in the case that no allocation is taking place. As a result reads and non-allocating writes should be faster. A quick test with postmark appears to support this. There is a limit on the number of blocks mapped in a single bmap call in that it will only ever map blocks which are pointed to from a single pointer block. So in other words, it will never try to do additional i/o in order to satisfy read-ahead. The maximum number of blocks is thus somewhat less than 512 (the GFS2 4k block size minus the header divided by sizeof(u64)). I've further limited the mapping of "normal" blocks to 32 blocks (to avoid extra work) since readpages() will currently read a maximum of 32 blocks ahead (128k). Some further work will probably be needed to set a suitable value for DIO as well, but for now thats left at the maximum 512 (see ops_address.c:gfs2_get_block_direct). There is probably a lot more that can be done to improve bmap for GFS2, but this is a good first step. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-05[GFS2] Make headers compile on their ownSteven Whitehouse1-0/+4
As per Jan Engelhardt's comments, this should make all the headers compile on their own by including and/or declaring structures early. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04[GFS2] Change all types to uX styleSteven Whitehouse1-2/+2
This makes all fixed size types have consistent names. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01[GFS2] Update copyright, tidy up incore.hSteven Whitehouse1-1/+1
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this updates the copyright message to say "version" in full rather than "v.2". Also incore.h has been updated to remove forward structure declarations which are not required. The gfs2_quota_lvb structure has now had endianess annotations added to it. Also quota.c has been updated so that we now store the lvb data locally in endian independant format to avoid needing a structure in host endianess too. As a result the endianess conversions are done as required at various points and thus the conversion routines in lvb.[ch] are no longer required. I've moved the one remaining constant in lvb.h thats used into lm.h and removed the unused lvb.[ch]. I have not changed the HIF_ constants. That is left to a later patch which I hope will unify the gh_flags and gh_iflags fields of the struct gfs2_holder. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-07-26[GFS2] Tidy gfs2_unstuffer_pageSteven Whitehouse1-6/+1
Tidy up gfs2_unstuffer_page by: a) Moving it into bmap.c b) Making it static c) Calling it directly from gfs2_unstuff_dinode d) Updating all callers of gfs2_unstuff_dinode due to one less required argument. It doesn't change the behaviour at all. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18[GFS2] Update copyright date to 2006Steven Whitehouse1-1/+1
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-06[GFS2] Readpages supportSteven Whitehouse1-3/+2
This adds readpages support (and also corrects a small bug in the readpage error path at the same time). Hopefully this will improve performance by allowing GFS to submit larger lumps of I/O at a time. In order to simplify the setting of BH_Boundary, it currently gets set when we hit the end of a indirect pointer block. There is always a boundary at this point with the current allocation code. It doesn't get all the boundaries right though, so there is still room for improvement in this. See comments in fs/gfs2/ops_address.c for further information about readpages with GFS2. Signed-off-by: Steven Whitehouse
2006-04-28[GFS2] [-mm patch] fs/gfs2/: possible cleanupsAdrian Bunk1-2/+0
This patch contains the following possible cleanups: - make needlessly global code static - #if 0 unused functions - remove the following global function that was both unused and unimplemented: - super.c: gfs2_do_upgrade() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-30[GFS2] Remove unused prototypeSteven Whitehouse1-1/+0
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-24[GFS2] Remove pointless argument relating to truncateSteven Whitehouse1-2/+1
For some reason a function pointer was being passed through the truncate code which only ever took one value. This removes the function pointer and replaces it with a single call to the function in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18[GFS2] Remove unused code from various filesSteven Whitehouse1-2/+0
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16[GFS2] The core of GFS2David Teigland1-0/+39
This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>