| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This consistency check was originally added by commit 9287c6452d2b1
("gfs2: Fix occasional glock use-after-free"). It is ill-placed in
gfs2_glock_free() because if it holds there, it must equally hold in
__gfs2_glock_put() already. Either way, the check doesn't seem
necessary anymore.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Currently, gfs2_scan_glock_lru() decrements lru_count when a glock is
moved onto the dispose list. When such a glock is then stolen from the
dispose list while gfs2_dispose_glock_lru() doesn't hold the lru_lock,
lru_count will be decremented again, so the counter will eventually go
negative.
This bug has existed in one form or another since at least commit
97cc1025b1a91 ("GFS2: Kill two daemons with one patch").
Fix this by only decrementing lru_count when we actually remove a glock
and schedule for it to be unlocked and dropped. We also don't need to
remove and then re-add glocks when we can just as well move them back
onto the lru_list when necessary.
In addition, return the number of glocks freed as we should, not the
number of glocks moved onto the dispose list.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Commit 228804a35caa tried to add a refcount check to
gfs2_scan_glock_lru() to make sure that glocks that are still referenced
cannot be freed. It failed to account for the bias state_change() adds
to the refcount for held glocks, so held glocks are no longer removed
from the glock cache, which can lead to out-of-memory problems. Fix
that. (The inodes those glocks are associated with do get shrunk and do
get pushed out of memory.)
In addition, use the same eligibility check in gfs2_scan_glock_lru() and
gfs2_dispose_glock_lru().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This reverts commit 62862485a4c3a52029fc30f4bdde9af04afdafc9.
Commit 62862485a4c3 tried to fix issues introduced by commit
228804a35caa ("gfs2: Make glock lru list scanning safer"), but like that
commit, it failed to account for the bias state_change() adds to the
glock reference count for locked glocks. Revert commit 62862485a4c3 so
that we can fix commit 228804a35caa properly.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Commit 3e11e53041502 tries to suppress dlm_lock() lock conversion errors
that occur when the lockspace has already been released.
It does that by setting and checking the SDF_SKIP_DLM_UNLOCK flag. This
conflicts with the intended meaning of the SDF_SKIP_DLM_UNLOCK flag, so
check whether the lockspace is still allocated instead.
(Given the current DLM API, checking for this kind of error after the
fact seems easier that than to make sure that the lockspace is still
allocated before calling dlm_lock(). Changing the DLM API so that users
maintain the lockspace references themselves would be an option.)
Fixes: 3e11e53041502 ("GFS2: ignore unlock failures after withdraw")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The GLF_LOCK flag is protected by the gl->gl_lockref.lock spin lock
which is held when entering run_queue(), so we can use test_bit() and
set_bit() here.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In gfs2_dispose_glock_lru(), we want to skip glocks which are in the
process of transitioning state (as indicated by the set GLF_LOCK flag),
but we we don't need to set that flag for requesting a state transition.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Function gfs2_glock_queue_put() puts a glock reference by enqueuing
glock work instead of putting the reference directly. This ensures that
the operation won't sleep, but it is costly and really only necessary
when putting the final glock reference. Replace it with a new
gfs2_glock_put_async() function that only queues glock work when putting
the last glock reference.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In function signal_our_withdraw(), we are calling gfs2_glock_queue_put()
in a context in which we are actually allowed to sleep, so replace that
with a simple call to gfs2_glock_put().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In gfs2_jindex_free(), set sdp->sd_jdesc to NULL under the log flush
lock to provide exclusion against gfs2_log_flush().
In gfs2_log_flush(), check if sdp->sd_jdesc is non-NULL before
dereferencing it. Otherwise, we could run into a NULL pointer
dereference when outstanding glock work races with an unmount
(glock_work_func -> run_queue -> do_xmote -> inode_go_sync ->
gfs2_log_flush).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Commit fffe9bee14b0 ("gfs2: Delay withdraw from atomic context")
switched from gfs2_withdraw() to gfs2_withdraw_delayed() in
gfs2_ail_error(), but failed to then check if a delayed withdraw had
occurred. Fix that by adding the missing check in __gfs2_ail_flush(),
where the spin locks are already dropped and a withdraw is possible.
Fixes: fffe9bee14b0 ("gfs2: Delay withdraw from atomic context")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When calling gfs2_glock_get(), consistently pass the CREATE or NO_CREATE
flag for the create argument. This is the only place that passes 0
instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Follow up to commit e7beb8b6de1a ("gfs2: Rename SDF_DEACTIVATING to
SDF_KILL") and change the description of the SDF_KILL flag from
"Deactivating" to "Killing".
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The type argument of gfs2_meta_check_ii() is always set to "magic
number", so remove that argument and hardcode the string in
gfs2_meta_check_ii(). Change the string to "bad magic number" to
emphasize that the problem is the incorrect magic number.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Get rid of attempts to create multi-line syslog entries; this only makes
the messages harder to read.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
gfs2_consist_inode() logs an error message with the source file and line
number. When we jump before calling it, the line number becomes less
useful as it no longer relates to the source of the error. To aid
troubleshooting, replace the gotos with the gfs2_consist_inode() calls
so that the error messages are more informative.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
- Fix boundary check in punch_hole
* tag 'gfs2-v6.8-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix invalid metadata access in punch_hole
|
|
Yes, yes, I know the slab people were planning on going slow and letting
every subsystem fight this thing on their own. But let's just rip off
the band-aid and get it over and done with. I don't want to see a
number of unnecessary pull requests just to get rid of a flag that no
longer has any meaning.
This was mainly done with a couple of 'sed' scripts and then some manual
cleanup of the end result.
Link: https://lore.kernel.org/all/CAHk-=wji0u+OOtmAOD-5JV3SXcRJF___k_+8XNKmak0yd5vW1Q@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs uuid updates from Christian Brauner:
"This adds two new ioctl()s for getting the filesystem uuid and
retrieving the sysfs path based on the path of a mounted filesystem.
Getting the filesystem uuid has been implemented in filesystem
specific code for a while it's now lifted as a generic ioctl"
* tag 'vfs-6.9.uuid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: add support for FS_IOC_GETFSSYSFSPATH
fs: add FS_IOC_GETFSSYSFSPATH
fat: Hook up sb->s_uuid
fs: FS_IOC_GETUUID
ovl: convert to super_set_uuid()
fs: super_set_uuid()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull file locking updates from Christian Brauner:
"A few years ago struct file_lock_context was added to allow for
separate lists to track different types of file locks instead of using
a singly-linked list for all of them.
Now leases no longer need to be tracked using struct file_lock.
However, a lot of the infrastructure is identical for leases and locks
so separating them isn't trivial.
This splits a group of fields used by both file locks and leases into
a new struct file_lock_core. The new core struct is embedded in struct
file_lock. Coccinelle was used to convert a lot of the callers to deal
with the move, with the remaining 25% or so converted by hand.
Afterwards several internal functions in fs/locks.c are made to work
with struct file_lock_core. Ultimately this allows to split struct
file_lock into struct file_lock and struct file_lease. The file lease
APIs are then converted to take struct file_lease"
* tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (51 commits)
filelock: fix deadlock detection in POSIX locking
filelock: always define for_each_file_lock()
smb: remove redundant check
filelock: don't do security checks on nfsd setlease calls
filelock: split leases out of struct file_lock
filelock: remove temporary compatibility macros
smb/server: adapt to breakup of struct file_lock
smb/client: adapt to breakup of struct file_lock
ocfs2: adapt to breakup of struct file_lock
nfsd: adapt to breakup of struct file_lock
nfs: adapt to breakup of struct file_lock
lockd: adapt to breakup of struct file_lock
fuse: adapt to breakup of struct file_lock
gfs2: adapt to breakup of struct file_lock
dlm: adapt to breakup of struct file_lock
ceph: adapt to breakup of struct file_lock
afs: adapt to breakup of struct file_lock
9p: adapt to breakup of struct file_lock
filelock: convert seqfile handling to use file_lock_core
filelock: convert locks_translate_pid to take file_lock_core
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap updates from Christian Brauner:
- Restore read-write hints in struct bio through the bi_write_hint
member for the sake of UFS devices in mobile applications. This can
result in up to 40% lower write amplification in UFS devices. The
patch series that builds on this will be coming in via the SCSI
maintainers (Bart)
- Overhaul the iomap writeback code. Afterwards ->map_blocks() is able
to map multiple blocks at once as long as they're in the same folio.
This reduces CPU usage for buffered write workloads on e.g., xfs on
systems with lots of cores (Christoph)
- Record processed bytes in iomap_iter() trace event (Kassey)
- Extend iomap_writepage_map() trace event after Christoph's
->map_block() changes to map mutliple blocks at once (Zhang)
* tag 'vfs-6.9.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
iomap: Add processed for iomap_iter
iomap: add pos and dirty_len into trace_iomap_writepage_map
block, fs: Restore the per-bio/request data lifetime fields
fs: Propagate write hints to the struct block_device inode
fs: Move enum rw_hint into a new header file
fs: Split fcntl_rw_hint()
fs: Verify write lifetime constants at compile time
fs: Fix rw_hint validation
iomap: pass the length of the dirty region to ->map_blocks
iomap: map multiple blocks at a time
iomap: submit ioends immediately
iomap: factor out a iomap_writepage_map_block helper
iomap: only call mapping_set_error once for each failed bio
iomap: don't chain bios
iomap: move the iomap_sector sector calculation out of iomap_add_to_ioend
iomap: clean up the iomap_alloc_ioend calling convention
iomap: move all remaining per-folio logic into iomap_writepage_map
iomap: factor out a iomap_writepage_handle_eof helper
iomap: move the PF_MEMALLOC check to iomap_writepages
iomap: move the io_folios field out of struct iomap_ioend
...
|
|
In punch_hole(), when the offset lies in the final block for a given
height, there is no hole to punch, but the maximum size check fails to
detect that. Consequently, punch_hole() will try to punch a hole beyond
the end of the metadata and fail. Fix the maximum size check.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Some weird old filesytems have UUID-like things that we wish to expose
as UUIDs, but are smaller; add a length field so that the new
FS_IOC_(GET|SET)UUID ioctls can handle them in generic code.
And add a helper super_set_uuid(), for setting nonstandard length uuids.
Helper is now required for the new FS_IOC_GETUUID ioctl; if
super_set_uuid() hasn't been called, the ioctl won't be supported.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240207025624.1019754-2-kent.overstreet@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most of the existing APIs have remained the same, but subsystems that
access file_lock fields directly need to reach into struct
file_lock_core now.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-38-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In a future patch, we're going to split file leases into their own
structure. Since a lot of the underlying machinery uses the same fields
move those into a new file_lock_core, and embed that inside struct
file_lock.
For now, add some macros to ensure that we can continue to build while
the conversion is in progress.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-17-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert to using the new file locking helper functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-9-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit "gfs2: Use GL_NOBLOCK flag for non-blocking lookups" has several
issues, some of which are non-trivial to fix, so revert it for now:
https://lore.kernel.org/gfs2/20240202050230.GA875515@ZenIV/T/
This reverts commit dd00aaeb343255a8a30de671bd27bde79a47c8e5.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Let the file system know how much dirty data exists at the passed
in offset. This allows file systems to allocate the right amount
of space that actually is written back if they can't eagerly
convert (e.g. because they don't support unwritten extents).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-15-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set cleans up the interface between nfs lockd and dlm, which is
handling nfs file locking for gfs2 and ocfs2. Very basic lockd
functionality is fixed, in which the fl owner was using the lockd pid
instead of the owner value from nfs"
* tag 'dlm-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: update format header reflect current format
dlm: fix format seq ops type 4
dlm: implement EXPORT_OP_ASYNC_LOCK
dlm: use FL_SLEEP to determine blocking vs non-blocking
dlm: use fl_owner from lockd
dlm: use kernel_connect() and kernel_bind()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Add support for non-blocking lookup (MAY_NOT_BLOCK / LOOKUP_RCU)
- Various minor fixes and cleanups
* tag 'gfs2-v6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix freeze consistency check in log_write_header
gfs2: Refcounting fix in gfs2_thaw_super
gfs2: Minor gfs2_{freeze,thaw}_super cleanup
gfs2: Use wait_event_freezable_timeout() for freezable kthread
gfs2: Add missing set_freezable() for freezable kthread
gfs2: Remove use of error flag in journal reads
gfs2: Lift withdraw check out of gfs2_ail1_empty
gfs2: Rename gfs2_withdrawn to gfs2_withdrawing_or_withdrawn
gfs2: Mark withdraws as unlikely
gfs2: Minor gfs2_ail1_empty cleanup
gfs2: use is_subdir()
gfs2: d_obtain_alias(ERR_PTR(...)) will do the right thing
gfs2: Use GL_NOBLOCK flag for non-blocking lookups
gfs2: Add GL_NOBLOCK flag
gfs2: rgrp: fix kernel-doc warnings
gfs2: fix kernel BUG in gfs2_quota_cleanup
gfs2: Fix inode_go_instantiate description
gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
All callers are passing end_buffer_async_write as this argument, so we can
hardcode references to it within __block_write_full_folio(). That lets us
make end_buffer_async_write() static.
Link: https://lkml.kernel.org/r/20231215200245.748418-15-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert the function to be compatible with writepage_t so that it can be
passed to write_cache_pages() by blkdev. This removes a call to
compound_head(). We can also remove the function export as both callers
are built-in.
Link: https://lkml.kernel.org/r/20231215200245.748418-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Functions gfs2_freeze_super() and gfs2_thaw_super() are using the
SDF_FROZEN flag to indicate when the filesystem is frozen, synchronized
by sd_freeze_mutex. However, this doesn't prevent writes from happening
between the point of calling thaw_super() and the point where the
SDF_FROZEN flag is cleared, so the following assert can trigger in
log_write_header():
gfs2_assert_withdraw(sdp, !test_bit(SDF_FROZEN, &sdp->sd_flags));
Fix that by checking for sb->s_writers.frozen != SB_FREEZE_COMPLETE in
log_write_header() instead. To make sure that the filesystem-specific
part of freezing happens before sb->s_writers.frozen is set to
SB_FREEZE_COMPLETE, move that code from gfs2_freeze_locally() into
gfs2_freeze_fs() and hook that up to the .freeze_fs operation.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
It turns out that the .freeze_super and .thaw_super operations require
the filesystem to manage the superblock refcount itself. We are using
the freeze_super() and thaw_super() helpers to mostly take care of that
for us, but this means that the superblock may no longer be around by
when thaw_super() returns, and gfs2_thaw_super() will then access freed
memory. Take an extra superblock reference in gfs2_thaw_super() to fix
that.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This minor cleanup to gfs2_freeze_super() and gfs2_thaw_super() prepares
for the following refcounting fix.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
A freezable kernel thread can enter frozen state during freezing by
either calling try_to_freeze() or using wait_event_freezable() and its
variants. So for the following snippet of code in a kernel thread loop:
try_to_freeze();
wait_event_interruptible_timeout();
We can change it to a simple wait_event_freezable_timeout() and then
eliminate a function call.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The kernel thread function gfs2_logd() and gfs2_quotad() invoke the
try_to_freeze() in its loop. But all the kernel threads are no-freezable
by default. So if we want to make a kernel thread to be freezable,
we have to invoke set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Conventionally, we use the uptodate bit to signal whether a read
encountered an error or not. Use folio_end_read() to set the uptodate
bit on success. Also use filemap_set_wb_err() to communicate the errno
instead of the more heavy-weight mapping_set_error().
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Lift the check for the SDF_WITHDRAWING flag out of gfs2_ail1_empty() and
into its callers. This is needed so that gfs2_flush_revokes() can drop
the sd_log_lock spinlock before triggering a withdraw if necessary.
Instead of checking for the SDF_WITHDRAWING flag, use
gfs2_withdrawing(). Also, the low-level code triggering the delayed
withdraw reports when there is a problem, so there is no need to report
that again.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This function checks whether the filesystem has been been marked to be
withdrawn eventually or has been withdrawn already. Rename this
function to avoid confusing code like checking for gfs2_withdrawing()
when gfs2_withdrawn() has already returned true.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Mark the gfs2_withdrawn(), gfs2_withdrawing(), and
gfs2_withdraw_in_prog() inline functions as likely to return %false.
This allows to get rid of likely() and unlikely() annotations at the
call sites of those functions.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Change gfs2_ail1_empty() to return %true when the ail1 list is empty.
Based on that, make the loop in empty_ail1_list() more obvious.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
... instead of reimplementing it with misguiding name (is_ancestor(x, y)
would normally imply "x is an ancestor of y", not the other way round).
With races, while we are at it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add the GL_NOBLOCK flag to the locking requests in gfs2_permission() and
gfs2_drevalidate() when called with the MAY_NOT_BLOCK flag and
LOOKUP_RCU flag, respectively. This will cause the locking requests to
be handled without sleeping if possible. We bail out with -ECHILD if we
can't grant the glock immediately.
Make sure not to dget() + dput() the parent dentry in gfs2_drevalidate()
in LOOKUP_RCU mode; dput() is a sleeping operation.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add a GL_NOBLOCK flag for trying to take a glock without sleeping. This
will be used for implementing non-blocking lookup (MAY_NOT_BLOCK in
gfs2_permission, LOOKUP_RCU in gfs2_drevalidate).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Fix kernel-doc warnings found when using "W=1".
rgrp.c:162: warning: missing initial short description on line:
* gfs2_bit_search
rgrp.c:1200: warning: Function parameter or member 'gl' not described in 'gfs2_rgrp_go_instantiate'
rgrp.c:1200: warning: Excess function parameter 'gh' description in 'gfs2_rgrp_go_instantiate'
rgrp.c:1970: warning: missing initial short description on line:
* gfs2_rgrp_used_recently
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
[Syz report]
kernel BUG at fs/gfs2/quota.c:1508!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 5060 Comm: syz-executor505 Not tainted 6.7.0-rc3-syzkaller-00134-g994d5c58e50e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:gfs2_quota_cleanup+0x6b5/0x6c0 fs/gfs2/quota.c:1508
Code: fe e9 cf fd ff ff 44 89 e9 80 e1 07 80 c1 03 38 c1 0f 8c 2d fe ff ff 4c 89 ef e8 b6 19 23 fe e9 20 fe ff ff e8 ec 11 c7 fd 90 <0f> 0b e8 84 9c 4f 07 0f 1f 40 00 66 0f 1f 00 55 41 57 41 56 41 54
RSP: 0018:ffffc9000409f9e0 EFLAGS: 00010293
RAX: ffffffff83c76854 RBX: 0000000000000002 RCX: ffff888026001dc0
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000
RBP: ffffc9000409fb00 R08: ffffffff83c762b0 R09: 1ffff1100fd38015
R10: dffffc0000000000 R11: ffffed100fd38016 R12: dffffc0000000000
R13: ffff88807e9c0828 R14: ffff888014693580 R15: ffff88807e9c0000
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f16d1bd70f8 CR3: 0000000027199000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gfs2_put_super+0x2e1/0x940 fs/gfs2/super.c:611
generic_shutdown_super+0x13a/0x2c0 fs/super.c:696
kill_block_super+0x44/0x90 fs/super.c:1667
deactivate_locked_super+0xc1/0x130 fs/super.c:484
cleanup_mnt+0x426/0x4c0 fs/namespace.c:1256
task_work_run+0x24a/0x300 kernel/task_work.c:180
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xa34/0x2750 kernel/exit.c:871
do_group_exit+0x206/0x2c0 kernel/exit.c:1021
__do_sys_exit_group kernel/exit.c:1032 [inline]
__se_sys_exit_group kernel/exit.c:1030 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1030
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
...
[pid 5060] fsconfig(4, FSCONFIG_CMD_RECONFIGURE, NULL, NULL, 0) = 0
[pid 5060] exit_group(1) = ?
...
[Analysis]
When the task exits, it will execute cleanup_mnt() to recycle the mounted gfs2
file system, but it performs a system call fsconfig(4, FSCONFIG_CMD_RECONFIGURE,
NULL, NULL, 0) before executing the task exit operation.
This will execute the following kernel path to complete the setting of
SDF_JOURNAL_LIVE for sd_flags:
SYSCALL_DEFINE5(fsconfig, ..)->
vfs_fsconfig_locked()->
vfs_cmd_reconfigure()->
gfs2_reconfigure()->
gfs2_make_fs_rw()->
set_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags);
[Fix]
Add SDF_NORECOVERY check in gfs2_quota_cleanup() to avoid checking
SDF_JOURNAL_LIVE on the path where gfs2 is being unmounted.
Reported-and-tested-by: syzbot+3b6e67ac2b646da57862@syzkaller.appspotmail.com
Fixes: f66af88e3321 ("gfs2: Stop using gfs2_make_fs_ro for withdraw")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Fixes a "function parameter or member gl not described in
inode_go_instantiate" warning.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
