summaryrefslogtreecommitdiff
path: root/fs/inode.c
AgeCommit message (Collapse)AuthorFilesLines
2020-12-25Merge branch 'work.misc' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted patches from previous cycle(s)..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix hostfs_open() use of ->f_path.dentry Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode() fs/namespace.c: WARN if mnt_count has become negative
2020-12-11fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()Hao Li1-1/+3
If generic_drop_inode() returns true, it means iput_final() can evict this inode regardless of whether it is dirty or not. If we check I_DONTCACHE in generic_drop_inode(), any inode with this bit set will be evicted unconditionally. This is not the desired behavior because I_DONTCACHE only means the inode shouldn't be cached on the LRU list. As for whether we need to evict this inode, this is what generic_drop_inode() should do. This patch corrects the usage of I_DONTCACHE. This patch was proposed in [1]. [1]: https://lore.kernel.org/linux-fsdevel/20200831003407.GE12096@dread.disaster.area/ Fixes: dae2f8ed7992 ("fs: Lift XFS_IDONTCACHE to the VFS layer") Signed-off-by: Hao Li <lihao2018.fnst@cn.fujitsu.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-12-02block: remove i_bdevChristoph Hellwig1-3/+0
Switch the block device lookup interfaces to directly work with a dev_t so that struct block_device references are only acquired by the blkdev_get variants (and the blk-cgroup special case). This means that we now don't need an extra reference in the inode and can generally simplify handling of struct block_device to keep the lookups contained in the core block layer code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Coly Li <colyli@suse.de> [bcache] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-16fs: add a filesystem flag for THPsMatthew Wilcox (Oracle)1-0/+2
The page cache needs to know whether the filesystem supports THPs so that it doesn't send THPs to filesystems which can't handle them. Dave Chinner points out that getting from the page mapping to the filesystem type is too many steps (mapping->host->i_sb->s_type->fs_flags) so cache that information in the address space flags. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Rik van Riel <riel@surriel.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Link: https://lkml.kernel.org/r/20200916032717.22917-1-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-06Merge tag 'afs-next-20200604' of ↵Linus Torvalds1-16/+96
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS updates from David Howells: "There's some core VFS changes which affect a couple of filesystems: - Make the inode hash table RCU safe and providing some RCU-safe accessor functions. The search can then be done without taking the inode_hash_lock. Care must be taken because the object may be being deleted and no wait is made. - Allow iunique() to avoid taking the inode_hash_lock. - Allow AFS's callback processing to avoid taking the inode_hash_lock when using the inode table to find an inode to notify. - Improve Ext4's time updating. Konstantin Khlebnikov said "For now, I've plugged this issue with try-lock in ext4 lazy time update. This solution is much better." Then there's a set of changes to make a number of improvements to the AFS driver: - Improve callback (ie. third party change notification) processing by: (a) Relying more on the fact we're doing this under RCU and by using fewer locks. This makes use of the RCU-based inode searching outlined above. (b) Moving to keeping volumes in a tree indexed by volume ID rather than a flat list. (c) Making the server and volume records logically part of the cell. This means that a server record now points directly at the cell and the tree of volumes is there. This removes an N:M mapping table, simplifying things. - Improve keeping NAT or firewall channels open for the server callbacks to reach the client by actively polling the fileserver on a timed basis, instead of only doing it when we have an operation to process. - Improving detection of delayed or lost callbacks by including the parent directory in the list of file IDs to be queried when doing a bulk status fetch from lookup. We can then check to see if our copy of the directory has changed under us without us getting notified. - Determine aliasing of cells (such as a cell that is pointed to be a DNS alias). This allows us to avoid having ambiguity due to apparently different cells using the same volume and file servers. - Improve the fileserver rotation to do more probing when it detects that all of the addresses to a server are listed as non-responsive. It's possible that an address that previously stopped responding has become responsive again. Beyond that, lay some foundations for making some calls asynchronous: - Turn the fileserver cursor struct into a general operation struct and hang the parameters off of that rather than keeping them in local variables and hang results off of that rather than the call struct. - Implement some general operation handling code and simplify the callers of operations that affect a volume or a volume component (such as a file). Most of the operation is now done by core code. - Operations are supplied with a table of operations to issue different variants of RPCs and to manage the completion, where all the required data is held in the operation object, thereby allowing these to be called from a workqueue. - Put the standard "if (begin), while(select), call op, end" sequence into a canned function that just emulates the current behaviour for now. There are also some fixes interspersed: - Don't let the EACCES from ICMP6 mapping reach the user as such, since it's confusing as to whether it's a filesystem error. Convert it to EHOSTUNREACH. - Don't use the epoch value acquired through probing a server. If we have two servers with the same UUID but in different cells, it's hard to draw conclusions from them having different epoch values. - Don't interpret the argument to the CB.ProbeUuid RPC as a fileserver UUID and look up a fileserver from it. - Deal with servers in different cells having the same UUIDs. In the event that a CB.InitCallBackState3 RPC is received, we have to break the callback promises for every server record matching that UUID. - Don't let afs_statfs return values that go below 0. - Don't use running fileserver probe state to make server selection and address selection decisions on. Only make decisions on final state as the running state is cleared at the start of probing" Acked-by: Al Viro <viro@zeniv.linux.org.uk> (fs/inode.c part) * tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (27 commits) afs: Adjust the fileserver rotation algorithm to reprobe/retry more quickly afs: Show more a bit more server state in /proc/net/afs/servers afs: Don't use probe running state to make decisions outside probe code afs: Fix afs_statfs() to not let the values go below zero afs: Fix the by-UUID server tree to allow servers with the same UUID afs: Reorganise volume and server trees to be rooted on the cell afs: Add a tracepoint to track the lifetime of the afs_volume struct afs: Detect cell aliases 3 - YFS Cells with a canonical cell name op afs: Detect cell aliases 2 - Cells with no root volumes afs: Detect cell aliases 1 - Cells with root volumes afs: Implement client support for the YFSVL.GetCellName RPC op afs: Retain more of the VLDB record for alias detection afs: Fix handling of CB.ProbeUuid cache manager op afs: Don't get epoch from a server because it may be ambiguous afs: Build an abstraction around an "operation" concept afs: Rename struct afs_fs_cursor to afs_operation afs: Remove the error argument from afs_protocol_error() afs: Set error flag rather than return error from file status decode afs: Make callback processing more efficient. afs: Show more information in /proc/net/afs/servers ...
2020-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-05-31vfs, afs, ext4: Make the inode hash table RCU searchableDavid Howells1-16/+96
Make the inode hash table RCU searchable so that searches that want to access or modify an inode without taking a ref on that inode can do so without taking the inode hash table lock. The main thing this requires is some RCU annotation on the list manipulation operations. Inodes are already freed by RCU in most cases. Users of this interface must take care as the inode may be still under construction or may be being torn down around them. There are at least three instances where this can be of use: (1) Testing whether the inode number iunique() is going to return is currently unique (the iunique_lock is still held). (2) Ext4 date stamp updating. (3) AFS callback breaking. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> cc: linux-ext4@vger.kernel.org cc: linux-afs@lists.infradead.org
2020-04-27sysctl: pass kernel pointers to ->proc_handlerChristoph Hellwig1-1/+1
Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-21fs: inode.c: get rid of docs warningsMauro Carvalho Chehab1-3/+3
Use *foo makes the toolchain to think that this is an emphasis, causing those warnings: ./fs/inode.c:1609: WARNING: Inline emphasis start-string without end-string. ./fs/inode.c:1609: WARNING: Inline emphasis start-string without end-string. ./fs/inode.c:1615: WARNING: Inline emphasis start-string without end-string. So, use, instead, ``*foo``, in order to mark it as a literal block. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/e8da46a0e57f2af6d63a0c53665495075698e28a.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-03-06futex: Fix inode life-time issuePeter Zijlstra1-0/+1
As reported by Jann, ihold() does not in fact guarantee inode persistence. And instead of making it so, replace the usage of inode pointers with a per boot, machine wide, unique inode identifier. This sequence number is global, but shared (file backed) futexes are rare enough that this should not become a performance issue. Reported-by: Jann Horn <jannh@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2020-02-09Merge branch 'work.misc' of ↵Linus Torvalds1-13/+19
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: - bmap series from cmaiolino - getting rid of convolutions in copy_mount_options() (use a couple of copy_from_user() instead of the __get_user() crap) * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: saner copy_mount_options() fibmap: Reject negative block numbers fibmap: Use bmap instead of ->bmap method in ioctl_fibmap ecryptfs: drop direct calls to ->bmap cachefiles: drop direct usage of ->bmap method. fs: Enable bmap() function to properly return errors
2020-02-05Merge branch 'imm.timestamp' of ↵Linus Torvalds1-30/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs timestamp updates from Al Viro: "More 64bit timestamp work" * 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kernfs: don't bother with timestamp truncation fs: Do not overload update_time fs: Delete timespec64_trunc() fs: ubifs: Eliminate timespec64_trunc() usage fs: ceph: Delete timespec64_trunc() usage fs: cifs: Delete usage of timespec64_trunc fs: fat: Eliminate timespec64_trunc() usage utimes: Clamp the timestamps in notify_change()
2020-02-03fs: Enable bmap() function to properly return errorsCarlos Maiolino1-13/+19
By now, bmap() will either return the physical block number related to the requested file offset or 0 in case of error or the requested offset maps into a hole. This patch makes the needed changes to enable bmap() to proper return errors, using the return value as an error return, and now, a pointer must be passed to bmap() to be filled with the mapped physical block. It will change the behavior of bmap() on return: - negative value in case of error - zero on success or map fell into a hole In case of a hole, the *block will be zero too Since this is a prep patch, by now, the only error return is -EINVAL if ->bmap doesn't exist. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-23fscrypt: don't allow v1 policies with casefoldingDaniel Rosenberg1-1/+2
Casefolded encrypted directories will use a new dirhash method that requires a secret key. If the directory uses a v2 encryption policy, it's easy to derive this key from the master key using HKDF. However, v1 encryption policies don't provide a way to derive additional keys. Therefore, don't allow casefolding on directories that use a v1 policy. Specifically, make it so that trying to enable casefolding on a directory that has a v1 policy fails, trying to set a v1 policy on a casefolded directory fails, and trying to open a casefolded directory that has a v1 policy (if one somehow exists on-disk) fails. Signed-off-by: Daniel Rosenberg <drosen@google.com> [EB: improved commit message, updated fscrypt.rst, and other cleanups] Link: https://lore.kernel.org/r/20200120223201.241390-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-12-18fs: avoid softlockups in s_inodes iteratorsEric Sandeen1-0/+7
Anything that walks all inodes on sb->s_inodes list without rescheduling risks softlockups. Previous efforts were made in 2 functions, see: c27d82f fs/drop_caches.c: avoid softlockups in drop_pagecache_sb() ac05fbb inode: don't softlockup when evicting inodes but there hasn't been an audit of all walkers, so do that now. This also consistently moves the cond_resched() calls to the bottom of each loop in cases where it already exists. One loop remains: remove_dquot_ref(), because I'm not quite sure how to deal with that one w/o taking the i_lock. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-09fs: Do not overload update_timeDeepa Dinamani1-6/+3
update_time() also has an internal function pointer update_time. Even though this works correctly, it is confusing to the readers. Just use a regular if statement to call the generic function or the function pointer. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-09fs: Delete timespec64_trunc()Deepa Dinamani1-24/+0
There are no more callers to the function remaining. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-25mm,thp: avoid writes to file with THP in pagecacheSong Liu1-0/+3
In previous patch, an application could put part of its text section in THP via madvise(). These THPs will be protected from writes when the application is still running (TXTBSY). However, after the application exits, the file is available for writes. This patch avoids writes to file THP by dropping page cache for the file when the file is open for write. A new counter nr_thps is added to struct address_space. In do_dentry_open(), if the file is open for write and nr_thps is non-zero, we drop page cache for the whole file. Link: http://lkml.kernel.org/r/20190801184244.3169074-8-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Rik van Riel <riel@surriel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-30vfs: Add timestamp_truncate() apiDeepa Dinamani1-1/+32
timespec_trunc() function is used to truncate a filesystem timestamp to the right granularity. But, the function does not clamp tv_sec part of the timestamps according to the filesystem timestamp limits. The replacement api: timestamp_truncate() also alters the signature of the function to accommodate filesystem timestamp clamping according to flesystem limits. Note that the tv_nsec part is set to 0 if tv_sec is not within the range supported for the filesystem. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Jeff Layton <jlayton@kernel.org>
2019-07-13Merge tag 'vfs-fix-ioctl-checking-3' of ↵Linus Torvalds1-0/+86
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong: "Here's a patch series that sets up common parameter checking functions for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations. The goal here is to reduce the amount of behaviorial variance between the filesystems where those ioctls originated (ext2 and XFS, respectively) and everybody else. - Standardize parameter checking for the SETFLAGS and FSSETXATTR ioctls (which were the file attribute setters for ext4 and xfs and have now been hoisted to the vfs) - Only allow the DAX flag to be set on files and directories" * tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: only allow FSSETXATTR to set DAX flag on files and dirs vfs: teach vfs_ioc_fssetxattr_check to check extent size hints vfs: teach vfs_ioc_fssetxattr_check to check project id info vfs: create a generic checking function for FS_IOC_FSSETXATTR vfs: create a generic checking and prep function for FS_IOC_SETFLAGS
2019-07-11Merge tag 'copy-file-range-fixes-1' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull copy_file_range updates from Darrick Wong: "This fixes numerous parameter checking problems and inconsistent behaviors in the new(ish) copy_file_range system call. Now the system call will actually check its range parameters correctly; refuse to copy into files for which the caller does not have sufficient privileges; update mtime and strip setuid like file writes are supposed to do; and allows copying up to the EOF of the source file instead of failing the call like we used to. Summary: - Create a generic copy_file_range handler and make individual filesystems responsible for calling it (i.e. no more assuming that do_splice_direct will work or is appropriate) - Refactor copy_file_range and remap_range parameter checking where they are the same - Install missing copy_file_range parameter checking(!) - Remove suid/sgid and update mtime like any other file write - Change the behavior so that a copy range crossing the source file's eof will result in a short copy to the source file's eof instead of EINVAL - Permit filesystems to decide if they want to handle cross-superblock copy_file_range in their local handlers" * tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: fuse: copy_file_range needs to strip setuid bits and update timestamps vfs: allow copy_file_range to copy across devices xfs: use file_modified() helper vfs: introduce file_modified() helper vfs: add missing checks to copy_file_range vfs: remove redundant checks from generic_remap_checks() vfs: introduce generic_file_rw_checks() vfs: no fallback for ->copy_file_range vfs: introduce generic_copy_file_range()
2019-07-01vfs: only allow FSSETXATTR to set DAX flag on files and dirsDarrick J. Wong1-0/+8
The DAX flag only applies to files and directories, so don't let it get set for other types of files. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz>
2019-07-01vfs: teach vfs_ioc_fssetxattr_check to check extent size hintsDarrick J. Wong1-0/+18
Move the extent size hint checks that aren't xfs-specific to the vfs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz>
2019-07-01vfs: teach vfs_ioc_fssetxattr_check to check project id infoDarrick J. Wong1-0/+13
Standardize the project id checks for FSSETXATTR. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz>
2019-07-01vfs: create a generic checking function for FS_IOC_FSSETXATTRDarrick J. Wong1-0/+23
Create a generic checking function for the incoming FS_IOC_FSSETXATTR fsxattr values so that we can standardize some of the implementation behaviors. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz>
2019-07-01vfs: create a generic checking and prep function for FS_IOC_SETFLAGSDarrick J. Wong1-0/+24
Create a generic function to check incoming FS_IOC_SETFLAGS flag values and later prepare the inode for updates so that we can standardize the implementations that follow ext4's flag values. Note that the efivarfs implementation no longer fails a no-op SETFLAGS without CAP_LINUX_IMMUTABLE since that's the behavior in ext*. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2019-06-09vfs: introduce file_modified() helperAmir Goldstein1-0/+20
The combination of file_remove_privs() and file_update_mtime() is quite common in filesystem ->write_iter() methods. Modelled after the helper file_accessed(), introduce file_modified() and use it from generic_remap_file_range_prep(). Note that the order of calling file_remove_privs() before file_update_mtime() in the helper was matched to the more common order by filesystems and not the current order in generic_remap_file_range_prep(). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-05-31mm: fix page cache convergence regressionJohannes Weiner1-1/+1
Since a28334862993 ("page cache: Finish XArray conversion"), on most major Linux distributions, the page cache doesn't correctly transition when the hot data set is changing, and leaves the new pages thrashing indefinitely instead of kicking out the cold ones. On a freshly booted, freshly ssh'd into virtual machine with 1G RAM running stock Arch Linux: [root@ham ~]# ./reclaimtest.sh + dd of=workingset-a bs=1M count=0 seek=600 + cat workingset-a + cat workingset-a + cat workingset-a + cat workingset-a + cat workingset-a + cat workingset-a + cat workingset-a + cat workingset-a + ./mincore workingset-a 153600/153600 workingset-a + dd of=workingset-b bs=1M count=0 seek=600 + cat workingset-b + cat workingset-b + cat workingset-b + cat workingset-b + ./mincore workingset-a workingset-b 104029/153600 workingset-a 120086/153600 workingset-b + cat workingset-b + cat workingset-b + cat workingset-b + cat workingset-b + ./mincore workingset-a workingset-b 104029/153600 workingset-a 120268/153600 workingset-b workingset-b is a 600M file on a 1G host that is otherwise entirely idle. No matter how often it's being accessed, it won't get cached. While investigating, I noticed that the non-resident information gets aggressively reclaimed - /proc/vmstat::workingset_nodereclaim. This is a problem because a workingset transition like this relies on the non-resident information tracked in the page cache tree of evicted file ranges: when the cache faults are refaults of recently evicted cache, we challenge the existing active set, and that allows a new workingset to establish itself. Tracing the shrinker that maintains this memory revealed that all page cache tree nodes were allocated to the root cgroup. This is a problem, because 1) the shrinker sizes the amount of non-resident information it keeps to the size of the cgroup's other memory and 2) on most major Linux distributions, only kernel threads live in the root cgroup and everything else gets put into services or session groups: [root@ham ~]# cat /proc/self/cgroup 0::/user.slice/user-0.slice/session-c1.scope As a result, we basically maintain no non-resident information for the workloads running on the system, thus breaking the caching algorithm. Looking through the code, I found the culprit in the above-mentioned patch: when switching from the radix tree to xarray, it dropped the __GFP_ACCOUNT flag from the tree node allocations - the flag that makes sure the allocated memory gets charged to and tracked by the cgroup of the calling process - in this case, the one doing the fault. To fix this, allow xarray users to specify per-tree flag that makes xarray allocate nodes using __GFP_ACCOUNT. Then restore the page cache tree annotation to request such cgroup tracking for the cache nodes. With this patch applied, the page cache correctly converges on new workingsets again after just a few iterations: [root@ham ~]# ./reclaimtest.sh + dd of=workingset-a bs=1M count=0 seek=600 + cat workingset-a + cat workingset-a + cat workingset-a + cat workingset-a + cat workingset-a + cat workingset-a + cat workingset-a + cat workingset-a + ./mincore workingset-a 153600/153600 workingset-a + dd of=workingset-b bs=1M count=0 seek=600 + cat workingset-b + ./mincore workingset-a workingset-b 124607/153600 workingset-a 87876/153600 workingset-b + cat workingset-b + ./mincore workingset-a workingset-b 81313/153600 workingset-a 133321/153600 workingset-b + cat workingset-b + ./mincore workingset-a workingset-b 63036/153600 workingset-a 153600/153600 workingset-b Cc: stable@vger.kernel.org # 4.20+ Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08Merge branch 'work.misc' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff, with no common topic whatsoever..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: libfs: document simple_get_link() Documentation/filesystems/Locking: fix ->get_link() prototype Documentation/filesystems/vfs.txt: document how ->i_link works Documentation/filesystems/vfs.txt: remove bogus "Last updated" date fs: use timespec64 in relatime_need_update fs/block_dev.c: remove unused include
2019-05-07Merge branch 'work.icache' of ↵Linus Torvalds1-22/+34
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs inode freeing updates from Al Viro: "Introduction of separate method for RCU-delayed part of ->destroy_inode() (if any). Pretty much as posted, except that destroy_inode() stashes ->free_inode into the victim (anon-unioned with ->i_fops) before scheduling i_callback() and the last two patches (sockfs conversion and folding struct socket_wq into struct socket) are excluded - that pair should go through netdev once davem reopens his tree" * 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits) orangefs: make use of ->free_inode() shmem: make use of ->free_inode() hugetlb: make use of ->free_inode() overlayfs: make use of ->free_inode() jfs: switch to ->free_inode() fuse: switch to ->free_inode() ext4: make use of ->free_inode() ecryptfs: make use of ->free_inode() ceph: use ->free_inode() btrfs: use ->free_inode() afs: switch to use of ->free_inode() dax: make use of ->free_inode() ntfs: switch to ->free_inode() securityfs: switch to ->free_inode() apparmor: switch to ->free_inode() rpcpipe: switch to ->free_inode() bpf: switch to ->free_inode() mqueue: switch to ->free_inode() ufs: switch to ->free_inode() coda: switch to ->free_inode() ...
2019-05-02new inode method: ->free_inode()Al Viro1-22/+34
A lot of ->destroy_inode() instances end with call_rcu() of a callback that does RCU-delayed part of freeing. Introduce a new method for doing just that, with saner signature. Rules: ->destroy_inode ->free_inode f g immediate call of f(), RCU-delayed call of g() f NULL immediate call of f(), no RCU-delayed calls NULL g RCU-delayed call of g() NULL NULL RCU-delayed default freeing IOW, NULL ->free_inode gives the same behaviour as now. Note that NULL, NULL is equivalent to NULL, free_inode_nonrcu; we could mandate the latter form, but that would have very little benefit beyond making rules a bit more symmetric. It would break backwards compatibility, require extra boilerplate and expected semantics for (NULL, NULL) pair would have no use whatsoever... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-29Abort file_remove_privs() for non-reg. filesAlexander Lochmann1-2/+7
file_remove_privs() might be called for non-regular files, e.g. blkdev inode. There is no reason to do its job on things like blkdev inodes, pipes, or cdevs. Hence, abort if file does not refer to a regular inode. AV: more to the point, for devices there might be any number of inodes refering to given device. Which one to strip the permissions from, even if that made any sense in the first place? All of them will be observed with contents modified, after all. Found by LockDoc (Alexander Lochmann, Horst Schirmeier and Olaf Spinczyk) Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de> Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-26fs: use timespec64 in relatime_need_updateArnd Bergmann1-2/+2
For some reason, the conversion of the VFS code away from 'struct timespec' left one function behind that still uses it, for absolutely no reason. Using timespec64 will make the atime update logic work correctly past y2038. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-06fs/inode.c: inode_set_flags(): replace opencoded set_mask_bits()Vineet Gupta1-7/+1
It seems that commits 5f16f3225b0624 and 00a1a053ebe5, both with same commitlog ("ext4: atomically set inode->i_flags in ext4_set_inode_flags()") introduced the set_mask_bits API, but somehow missed not using it in ext4 in the end. Also, set_mask_bits() is used in fs quite a bit and we can possibly come up with a generic llsc based implementation (w/o the cmpxchg loop) Link: http://lkml.kernel.org/r/1548275584-18096-3-git-send-email-vgupta@synopsys.com Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-13Revert "mm: don't reclaim inodes with many attached pages"Dave Chinner1-5/+2
This reverts commit a76cf1a474d7d ("mm: don't reclaim inodes with many attached pages"). This change causes serious changes to page cache and inode cache behaviour and balance, resulting in major performance regressions when combining worklaods such as large file copies and kernel compiles. https://bugzilla.kernel.org/show_bug.cgi?id=202441 This change is a hack to work around the problems introduced by changing how agressive shrinkers are on small caches in commit 172b06c32b94 ("mm: slowly shrink slabs with a relatively small number of objects"). It creates more problems than it solves, wasn't adequately reviewed or tested, so it needs to be reverted. Link: http://lkml.kernel.org/r/20190130041707.27750-2-david@fromorbit.com Fixes: a76cf1a474d7d ("mm: don't reclaim inodes with many attached pages") Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Wolfgang Walter <linux@stwm.de> Cc: Roman Gushchin <guro@fb.com> Cc: Spock <dairinin@gmail.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28Merge tag 'y2038-for-4.21' of ↵Linus Torvalds1-1/+3
ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 updates from Arnd Bergmann: "More syscalls and cleanups This concludes the main part of the system call rework for 64-bit time_t, which has spread over most of year 2018, the last six system calls being - ppoll - pselect6 - io_pgetevents - recvmmsg - futex - rt_sigtimedwait As before, nothing changes for 64-bit architectures, while 32-bit architectures gain another entry point that differs only in the layout of the timespec structure. Hopefully in the next release we can wire up all 22 of those system calls on all 32-bit architectures, which gives us a baseline version for glibc to start using them. This does not include the clock_adjtime, getrusage/waitid, and getitimer/setitimer system calls. I still plan to have new versions of those as well, but they are not required for correct operation of the C library since they can be emulated using the old 32-bit time_t based system calls. Aside from the system calls, there are also a few cleanups here, removing old kernel internal interfaces that have become unused after all references got removed. The arch/sh cleanups are part of this, there were posted several times over the past year without a reaction from the maintainers, while the corresponding changes made it into all other architectures" * tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: timekeeping: remove obsolete time accessors vfs: replace current_kernel_time64 with ktime equivalent timekeeping: remove timespec_add/timespec_del timekeeping: remove unused {read,update}_persistent_clock sh: remove board_time_init() callback sh: remove unused rtc_sh_get/set_time infrastructure sh: sh03: rtc: push down rtc class ops into driver sh: dreamcast: rtc: push down rtc class ops into driver y2038: signal: Add compat_sys_rt_sigtimedwait_time64 y2038: signal: Add sys_rt_sigtimedwait_time32 y2038: socket: Add compat_sys_recvmmsg_time64 y2038: futex: Add support for __kernel_timespec y2038: futex: Move compat implementation into futex.c io_pgetevents: use __kernel_timespec pselect6: use __kernel_timespec ppoll: use __kernel_timespec signal: Add restore_user_sigmask() signal: Add set_user_sigmask()
2018-12-18vfs: replace current_kernel_time64 with ktime equivalentArnd Bergmann1-1/+3
current_time is the last remaining caller of current_kernel_time64(), which is a wrapper around ktime_get_coarse_real_ts64(). This calls the latter directly for consistency with the rest of the kernel that is moving to the ktime_get_ family of time accessors, as now documented in Documentation/core-api/timekeeping.rst. An open questions is whether we may want to actually call the more accurate ktime_get_real_ts64() for file systems that save high-resolution timestamps in their on-disk format. This would add a small overhead to each update of the inode stamps but lead to inode timestamps to actually have a usable resolution better than one jiffy (1 to 10 milliseconds normally). Experiments on a variety of hardware platforms show a typical time of around 100 CPU cycles to read the cycle counter and calculate the accurate time from that. On old platforms without a cycle counter, this can be signiciantly higher, up to several microseconds to access a hardware clock, but those have become very rare by now. I traced the original addition of the current_kernel_time() call to set the nanosecond fields back to linux-2.5.48, where Andi Kleen added a patch with subject "nanosecond stat timefields". Andi explains that the motivation was to introduce as little overhead as possible back then. At this time, reading the clock hardware was also more expensive when most architectures did not have a cycle counter. One side effect of having more accurate inode timestamp would be having to write out the inode every time that mtime/ctime/atime get touched on most systems, whereas many file systems today only write it when the timestamps have changed, i.e. at most once per jiffy unless something else changes as well. That change would certainly be noticed in some workloads, which is enough reason to not do it without a good reason, regardless of the cost of reading the time. One thing we could still consider however would be to round the timestamps from current_time() to multiples of NSEC_PER_JIFFY, e.g. full milliseconds rather than having six or seven meaningless but confusing digits at the end of the timestamp. Link: http://lkml.kernel.org/r/20180726130820.4174359-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-11-18mm: don't reclaim inodes with many attached pagesRoman Gushchin1-2/+5
Spock reported that commit 172b06c32b94 ("mm: slowly shrink slabs with a relatively small number of objects") leads to a regression on his setup: periodically the majority of the pagecache is evicted without an obvious reason, while before the change the amount of free memory was balancing around the watermark. The reason behind is that the mentioned above change created some minimal background pressure on the inode cache. The problem is that if an inode is considered to be reclaimed, all belonging pagecache page are stripped, no matter how many of them are there. So, if a huge multi-gigabyte file is cached in the memory, and the goal is to reclaim only few slab objects (unused inodes), we still can eventually evict all gigabytes of the pagecache at once. The workload described by Spock has few large non-mapped files in the pagecache, so it's especially noticeable. To solve the problem let's postpone the reclaim of inodes, which have more than 1 attached page. Let's wait until the pagecache pages will be evicted naturally by scanning the corresponding LRU lists, and only then reclaim the inode structure. Link: http://lkml.kernel.org/r/20181023164302.20436-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reported-by: Spock <dairinin@gmail.com> Tested-by: Spock <dairinin@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> [4.19.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-21page cache: Finish XArray conversionMatthew Wilcox1-1/+1
With no more radix tree API users left, we can drop the GFP flags and use xa_init() instead of INIT_RADIX_TREE(). Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-22Merge tag 'ovl-update-4.19' of ↵Linus Torvalds1-40/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: "This contains two new features: - Stack file operations: this allows removal of several hacks from the VFS, proper interaction of read-only open files with copy-up, possibility to implement fs modifying ioctls properly, and others. - Metadata only copy-up: when file is on lower layer and only metadata is modified (except size) then only copy up the metadata and continue to use the data from the lower file" * tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (66 commits) ovl: Enable metadata only feature ovl: Do not do metacopy only for ioctl modifying file attr ovl: Do not do metadata only copy-up for truncate operation ovl: add helper to force data copy-up ovl: Check redirect on index as well ovl: Set redirect on upper inode when it is linked ovl: Set redirect on metacopy files upon rename ovl: Do not set dentry type ORIGIN for broken hardlinks ovl: Add an inode flag OVL_CONST_INO ovl: Treat metacopy dentries as type OVL_PATH_MERGE ovl: Check redirects for metacopy files ovl: Move some dir related ovl_lookup_single() code in else block ovl: Do not expose metacopy only dentry from d_real() ovl: Open file with data except for the case of fsync ovl: Add helper ovl_inode_realdata() ovl: Store lower data inode in ovl_inode ovl: Fix ovl_getattr() to get number of blocks from lower ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry ovl: Copy up meta inode data from lowest data inode ovl: Modify ovl_lookup() and friends to lookup metacopy dentry ...
2018-08-14Merge branch 'work.mkdir' of ↵Linus Torvalds1-6/+47
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs icache updates from Al Viro: - NFS mkdir/open_by_handle race fix - analogous solution for FUSE, replacing the one currently in mainline - new primitive to be used when discarding halfway set up inodes on failed object creation; gives sane warranties re icache lookups not returning such doomed by still not freed inodes. A bunch of filesystems switched to that animal. - Miklos' fix for last cycle regression in iget5_locked(); -stable will need a slightly different variant, unfortunately. - misc bits and pieces around things icache-related (in adfs and jfs). * 'work.mkdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: jfs: don't bother with make_bad_inode() in ialloc() adfs: don't put inodes into icache new helper: inode_fake_hash() vfs: don't evict uninitialized inode jfs: switch to discard_new_inode() ext2: make sure that partially set up inodes won't be returned by ext2_iget() udf: switch to discard_new_inode() ufs: switch to discard_new_inode() btrfs: switch to discard_new_inode() new primitive: discard_new_inode() kill d_instantiate_no_diralias() nfs_instantiate(): prevent multiple aliases for directory inode
2018-08-03vfs: don't evict uninitialized inodeMiklos Szeredi1-2/+6
iput() ends up calling ->evict() on new inode, which is not yet initialized by owning fs. So use destroy_inode() instead. Add to sb->s_inodes list only if inode is not in I_CREATING state (meaning that it wasn't allocated with new_inode(), which already does the insertion). Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 80ea09a002bf ("vfs: factor out inode_insert5()") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-08-03new primitive: discard_new_inode()Al Viro1-4/+41
We don't want open-by-handle picking half-set-up in-core struct inode from e.g. mkdir() having failed halfway through. In other words, we don't want such inodes returned by iget_locked() on their way to extinction. However, we can't just have them unhashed - otherwise open-by-handle immediately *after* that would've ended up creating a new in-core inode over the on-disk one that is in process of being freed right under us. Solution: new flag (I_CREATING) set by insert_inode_locked() and removed by unlock_new_inode() and a new primitive (discard_new_inode()) to be used by such halfway-through-setup failure exits instead of unlock_new_inode() / iput() combinations. That primitive unlocks new inode, but leaves I_CREATING in place. iget_locked() treats finding an I_CREATING inode as failure (-ESTALE, once we sort out the error propagation). insert_inode_locked() treats the same as instant -EBUSY. ilookup() treats those as icache miss. [Fix by Dan Carpenter <dan.carpenter@oracle.com> folded in] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-18Revert "vfs: update ovl inode before relatime check"Miklos Szeredi1-27/+6
This reverts commit 598e3c8f72f5b77c84d2cb26cfd936ffb3cfdbaa. Overlayfs no longer relies on the vfs correct atime handling. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-18Revert "ovl: fix relatime for directories"Miklos Szeredi1-17/+4
This reverts commit cd91304e7190b4c4802f8e413ab2214b233e0260. Overlayfs no longer relies on the vfs correct atime handling. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-05Fix up non-directory creation in SGID directoriesLinus Torvalds1-0/+6
sgid directories have special semantics, making newly created files in the directory belong to the group of the directory, and newly created subdirectories will also become sgid. This is historically used for group-shared directories. But group directories writable by non-group members should not imply that such non-group members can magically join the group, so make sure to clear the sgid bit on non-directories for non-members (but remember that sgid without group execute means "mandatory locking", just to confuse things even more). Reported-by: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds1-17/+41
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-07Merge tag 'ovl-fixes-4.18' of ↵Linus Torvalds1-89/+75
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "This contains a fix for the vfs_mkdir() issue discovered by Al, as well as other fixes and cleanups" * tag 'ovl-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: use inode_insert5() to hash a newly created inode ovl: Pass argument to ovl_get_inode() in a structure vfs: factor out inode_insert5() ovl: clean up copy-up error paths ovl: return EIO on internal error ovl: make ovl_create_real() cope with vfs_mkdir() safely ovl: create helper ovl_create_temp() ovl: return dentry from ovl_create_real() ovl: struct cattr cleanups ovl: strip debug argument from ovl_do_ helpers ovl: remove WARN_ON() real inode attributes mismatch ovl: Kconfig documentation fixes ovl: update documentation for unionmount-testsuite