summaryrefslogtreecommitdiff
path: root/fs/jffs2/file.c
AgeCommit message (Collapse)AuthorFilesLines
2012-11-09jffs2: Fix lock acquisition order bug in jffs2_write_beginThomas Betker1-18/+21
jffs2_write_begin() first acquires the page lock, then f->sem. This causes an AB-BA deadlock with jffs2_garbage_collect_live(), which first acquires f->sem, then the page lock: jffs2_garbage_collect_live mutex_lock(&f->sem) (A) jffs2_garbage_collect_dnode jffs2_gc_fetch_page read_cache_page_async do_read_cache_page lock_page(page) (B) jffs2_write_begin grab_cache_page_write_begin find_lock_page lock_page(page) (B) mutex_lock(&f->sem) (A) We fix this by restructuring jffs2_write_begin() to take f->sem before the page lock. However, we make sure that f->sem is not held when calling jffs2_reserve_space(), as this is not permitted by the locking rules. The deadlock above was observed multiple times on an SoC with a dual ARMv7 (Cortex-A9), running the long-term 3.4.11 kernel; it occurred when using scp to copy files from a host system to the ARM target system. The fix was heavily tested on the same target system. Cc: stable@vger.kernel.org Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-21userns: Convert jffs2 to use kuid and kgid where appropriateEric W. Biederman1-4/+4
- General routine uid/gid conversion work - When storing posix acls treat ACL_USER and ACL_GROUP separately so I can call from_kuid or from_kgid as appropriate. - When reading posix acls treat ACL_USER and ACL_GROUP separately so I can call make_kuid or make_kgid as appropriate. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-03-27jffs2: Use pr_fmt and remove jffs: from formatsJoe Perches1-0/+2
Use pr_fmt to prefix KBUILD_MODNAME to appropriate logging messages. Remove now unnecessary internal prefixes from formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27jffs2: Convert most D1/D2 macros to jffs2_dbgJoe Perches1-13/+18
D1 and D2 macros are mostly uses to emit debugging messages. Convert the logging uses of D1 & D2 to jffs2_dbg(level, fmt, ...) to be a bit more consistent style with the rest of the kernel. All jffs2_dbg output is now at KERN_DEBUG where some of the previous uses were emitted at various KERN_<LEVEL>s. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-07-25fs: take the ACL checks to common codeChristoph Hellwig1-1/+1
Replace the ->check_acl method with a ->get_acl method that simply reads an ACL from disk after having a cache miss. This means we can replace the ACL checking boilerplate code with a single implementation in namei.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-21fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlersJosef Bacik1-1/+8
Btrfs needs to be able to control how filemap_write_and_wait_range() is called in fsync to make it less of a painful operation, so push down taking i_mutex and the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some file systems can drop taking the i_mutex altogether it seems, like ext3 and ocfs2. For correctness sake I just pushed everything down in all cases to make sure that we keep the current behavior the same for everybody, and then each individual fs maintainer can make up their mind about what to do from there. Thanks, Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-10Merge git://git.infradead.org/mtd-2.6Linus Torvalds1-0/+1
* git://git.infradead.org/mtd-2.6: (79 commits) mtd: Remove obsolete <mtd/compatmac.h> include mtd: Update copyright notices jffs2: Update copyright notices mtd-physmap: add support users can assign the probe type in board files mtd: remove redwood map driver mxc_nand: Add v3 (i.MX51) Support mxc_nand: support 8bit ecc mxc_nand: fix correct_data function mxc_nand: add V1_V2 namespace to registers mxc_nand: factor out a check_int function mxc_nand: make some internally used functions overwriteable mxc_nand: rework get_dev_status mxc_nand: remove 0xe00 offset from registers mtd: denali: Add multi connected NAND support mtd: denali: Remove set_ecc_config function mtd: denali: Remove unuseful code in get_xx_nand_para functions mtd: denali: Remove device_info_tag structure mtd: m25p80: add support for the Winbond W25Q32 SPI flash chip mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chips mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chips ... Fix up trivial conflicts in drivers/mtd/maps/{Kconfig,redwood.c} due to redwood driver removal.
2010-08-08jffs2: Update copyright noticesDavid Woodhouse1-0/+1
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2010-05-28drop unused dentry argument to ->fsyncChristoph Hellwig1-2/+2
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-1/+0
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-09-08jffs2/jfs/xfs: switch over to 'check_acl' rather than 'permission()'Linus Torvalds1-1/+1
This avoids an indirect call in the VFS for each path component lookup. Well, at least as long as you own the directory in question, and the ACL check is unnecessary. Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-04jffs2: Fix return value from jffs2_do_readpage_nolock()Anders Grafström1-1/+1
This fixes "kernel BUG at fs/jffs2/file.c:251!". This pseudocode hopefully illustrates the scenario that triggers it: jffs2_write_begin { jffs2_do_readpage_nolock { jffs2_read_inode_range { jffs2_read_dnode { Data CRC 33c102e9 != calculated CRC 0ef77e7b for node at 005d42e4 return -EIO; } } ClearPageUptodate(pg); return 0; } } jffs2_write_end { BUG_ON(!PageUptodate(pg)); } Signed-off-by: Anders Grafström <grfstrm@users.sourceforge.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-05fs: symlink write_begin allocation context fixNick Piggin1-1/+1
With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: Nick Piggin <npiggin@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-11[JFFS2] Use .unlocked_ioctlStoyan Gaydarov1-1/+1
This changes the .ioctl to the .unlocked_ioctl version. Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-04-22[JFFS2] semaphore->mutex conversionDavid Woodhouse1-8/+8
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-15JFFS2 Fix of panics caused by wrong condition for hole frag creation in ↵Alexey Korolev1-1/+1
write_begin This fixes a regression introduced in commit 205c109a7a96d9a3d8ffe64c4068b70811fef5e8 when switching to write_begin/write_end operations in JFFS2. The page offset is miscalculated, leading to corruption of the fragment lists and subsequently to memory corruption and panics. [ Side note: the bug is a fairly direct result of the naming. Nick was likely misled by the use of "offs", since we tend to use the notion of "offset" not as an absolute position, but as an offset _within_ a page or allocation. Alternatively, a "pgoff_t" is a page index, but not a byte offset - our VM naming can be a bit confusing. So in this case, a VM person would likely have called this a "pos", not an "offs", or perhaps talked about byte offsets rather than page offsets (since it's counted in bytes, not pages). - Linus ] Signed-off-by: Alexey Korolev <akorolev@infradead.org> Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22[JFFS2] Fix return value from jffs2_write_end()Nick Piggin1-7/+4
jffs2_write_end() is sometimes passing back a "written" length greater than the length we passed into it, leading to a BUG at mm/filemap.c:1749 when used with unionfs. It happens because we actually write more than was requested, to reduce log fragmentation. These "longer" writes are fine, but they shouldn't get propagated back to the vm/vfs. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-16jffs2: convert to new aopsNick Piggin1-39/+66
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10sendfile: remove .sendfile from filesystems that use generic_file_sendfile()Jens Axboe1-1/+1
They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-25[JFFS2] Tidy up licensing/copyright boilerplate.David Woodhouse1-3/+1
In particular, remove the bit in the LICENCE file about contacting Red Hat for alternative arrangements. Their errant IS department broke that arrangement a long time ago -- the policy of collecting copyright assignments from contributors came to an end when the plug was pulled on the servers hosting the project, without notice or reason. We do still dual-license it for use with eCos, with the GPL+exception licence approved by the FSF as being GPL-compatible. It's just that nobody has the right to license it differently. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-12[PATCH] mark struct inode_operations const 2Arjan van de Ven1-1/+1
Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-01[PATCH] Streamline generic_file_* interfaces and filemap cleanupsBadari Pulavarty1-2/+4
This patch cleans up generic_file_*_read/write() interfaces. Christoph Hellwig gave me the idea for this clean ups. In a nutshell, all filesystems should set .aio_read/.aio_write methods and use do_sync_read/ do_sync_write() as their .read/.write methods. This allows us to cleanup all variants of generic_file_* routines. Final available interfaces: generic_file_aio_read() - read handler generic_file_aio_write() - write handler generic_file_aio_write_nolock() - no lock write handler __generic_file_aio_write_nolock() - internal worker routine Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29[PATCH] mark address_space_operations constChristoph Hellwig1-1/+1
Same as with already do with the file operations: keep them in .rodata and prevents people from doing runtime patching. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[JFFS2] Remove flash offset argument from various functions.David Woodhouse1-4/+4
We don't need the upper layers to deal with the physical offset. It's _always_ c->nextblock->offset + c->sector_size - c->nextblock->free_size so we might as well just let the actual write functions deal with that. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-18Merge git://git.infradead.org/mtd-2.6KaiGai Kohei1-6/+14
2006-05-14[JFFS2] Reduce excessive node count for syslog files.David Woodhouse1-6/+14
We currently get fairly poor behaviour with files which get many short writes, such as system logs. This is because we end up with many tiny data nodes, and the rbtree gets massive. None of these nodes are actually obsolete, so they are counted as 'clean' space. Eraseblocks can be entirely full of these nodes (which are REF_NORMAL instead of REF_PRISTINE), and still they count entirely towards 'used_size' and the eraseblocks can sit on the clean_list for a long time without being picked for GC. One way to alleviate this in the long term is to account REF_NORMAL space separately from REF_PRISTINE space, rather than counting them both towards used_size. Then these eraseblocks can be picked for GC and the offending nodes will be garbage collected. The short-term fix, though -- which probably makes sense even if we do eventually implement the above -- is to merge these nodes as they're written. When we write the last byte in a page, write the _whole_ page. This obsoletes the earlier nodes in the page _immediately_ and we don't even need to wait for the garbage collection to do it. Original implementation from Ferenc Havasi <havasi@inf.u-szeged.hu> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-13[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)KaiGai Kohei1-1/+6
This attached patches provide xattr support including POSIX-ACL and SELinux support on JFFS2 (version.5). There are some significant differences from previous version posted at last December. The biggest change is addition of EBS(Erase Block Summary) support. Currently, both kernel and usermode utility (sumtool) can recognize xattr nodes which have JFFS2_NODETYPE_XATTR/_XREF nodetype. In addition, some bugs are fixed. - A potential race condition was fixed. - Unexpected fail when updating a xattr by same name/value pair was fixed. - A bug when removing xattr name/value pair was fixed. The fundamental structures (such as using two new nodetypes and exclusion mechanism by rwsem) are unchanged. But most of implementation were reviewed and updated if necessary. Espacially, we had to change several internal implementations related to load_xattr_datum() to avoid a potential race condition. [1/2] xattr_on_jffs2.kernel.version-5.patch [2/2] xattr_on_jffs2.utils.version-5.patch Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-03-28[PATCH] Make most file operations structs in fs/ constArjan van de Ven1-1/+1
This is a conversion to make the various file_operations structs in fs/ const. Basically a regexp job, with a few manual fixups The goal is both to increase correctness (harder to accidentally write to shared datastructures) and reducing the false sharing of cachelines with things that get dirty in .data (while .rodata is nicely read only and thus cache clean) Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[JFFS2] Clean up trailing white spacesThomas Gleixner1-10/+10
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07[JFFS2] Return 0, not number of bytes written, for success at commit_writeTodd Poynor1-3/+3
Some callers to block-layer commit_write function treat non-zero return as error, notably the loopback mount driver sometimes used in conjunction with JFFS2 on NAND flash for bad block avoidance, etc. Return zero for success as do various other commit_write functions. Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[JFFS2] Add erase block summary support (mount time improvement)Ferenc Havasi1-2/+3
The goal of summary is to speed up the mount time. Erase block summary (EBS) stores summary information at the end of every (closed) erase block. It is no longer necessary to scan all nodes separetly (and read all pages of them) just read this "small" summary, where every information is stored which is needed at mount time. This summary information is stored in a JFFS2_FEATURE_RWCOMPAT_DELETE. During the mount process if there is no summary info the orignal scan process will be executed. EBS works with NAND and NOR flashes, too. There is a user space tool called sumtool to generate this summary information for a JFFS2 image. Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-09-08[PATCH] jffs/jffs2: remove wrong function prototypesAdrian Bunk1-3/+0
This patch removes prototypes for the generic_file_open and generic_file_llseek functions. Besides being superfluous because they are already present in fs.h, they were also wrong because the actual functions aren't weak functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-06[JFFS2] Remove compatibilty cruft for ancient kernelsDavid Woodhouse1-4/+1
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-01[PATCH] Exterminate PAGE_BUGMatt Mackall1-2/+1
Remove PAGE_BUG - repalce it with BUG and BUG_ON. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+290
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!