| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull jfs updates from David Kleikamp:
"Folio conversion from Matthew Wilcox and a few various fixes"
* tag 'jfs-6.11' of github.com:kleikamp/linux-shaggy:
jfs: don't walk off the end of ealist
jfs: Fix shift-out-of-bounds in dbDiscardAG
jfs: Fix array-index-out-of-bounds in diFree
jfs: fix null ptr deref in dtInsertEntry
jfs: Remove use of folio error flag
fs: Remove i_blocks_per_page
jfs: Change metapage->page to metapage->folio
jfs: Convert force_metapage to use a folio
jfs: Convert inc_io to take a folio
jfs: Convert page_to_mp to folio_to_mp
jfs; Convert __invalidate_metapages to use a folio
jfs: Convert dec_io to take a folio
jfs: Convert drop_metapage and remove_metapage to take a folio
jfs; Convert release_metapage to use a folio
jfs: Convert insert_metapage() to take a folio
jfs: Convert __get_metapage to use a folio
jfs: Convert metapage_writepage to metapage_write_folio
jfs: Convert metapage_read_folio to use folio APIs
|
|
Add a check before visiting the members of ea to
make sure each ea stays within the ealist.
Signed-off-by: lei lu <llfamsec@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
When searching for the next smaller log2 block, BLKSTOL2() returned 0,
causing shift exponent -1 to be negative.
This patch fixes the issue by exiting the loop directly when negative
shift is found.
Reported-by: syzbot+61be3359d2ee3467e7e4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=61be3359d2ee3467e7e4
Signed-off-by: Pei Li <peili.dev@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Reported-by: syzbot+241c815bda521982cb49@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
[syzbot reported]
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713
...
[Analyze]
In dtInsertEntry(), when the pointer h has the same value as p, after writing
name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the
previously true judgment "p->header.flag & BT-LEAF" to change to no after writing
the name operation, this leads to entering an incorrect branch and accessing the
uninitialized object ih when judging this condition for the second time.
[Fix]
After got the page, check freelist first, if freelist == 0 then exit dtInsert()
and return -EINVAL.
Reported-by: syzbot+bba84aef3a26fb93deb9@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
When an xattr size is not what is expected, it is printed out to the
kernel log in hex format as a form of debugging. But when that xattr
size is bigger than the expected size, printing it out can cause an
access off the end of the buffer.
Fix this all up by properly restricting the size of the debug hex dump
in the kernel log.
Reported-by: syzbot+9dfe490c8176301c1d06@syzkaller.appspotmail.com
Cc: Dave Kleikamp <shaggy@kernel.org>
Link: https://lore.kernel.org/r/2024051433-slider-cloning-98f9@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Store the blk_status per folio (if we can have multiple metapages per
folio) instead of setting the folio error flag. This will allow us to
reclaim a precious folio flag shortly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Convert all the users to operate on a folio. Saves sixteen calls to
compound_head(). We still use sizeof(struct page) in print_hex_dump,
otherwise it will go into the second and third pages of the folio which
won't exist for jfs folios (since they are not large). This needs a
better solution, but finding it can be postponed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Convert the mp->page to a folio and operate on it. That lets us
convert metapage_write_one() to take a folio. Replaces five calls to
compound_head() with one.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
All their callers now have a folio, so pass it in. Remove mp_anchor()
as inc_io() was the last user. No savings here, just cleaning up some
remnants.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Access folio->private directly instead of testing the page private flag.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Retrieve a folio from the page cache instead of a page. Saves a
couple of calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
This means also converting the two handlers to take a folio.
Saves four calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
All callers now have a folio, so pass it in instead of the page.
Removes a couple of calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Convert mp->page to a folio and remove 7 hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Both of its callers now have a folio, so convert this function.
Use folio_attach_private() instead of manually setting folio->private.
This also gets the expected refcount of the folio correct.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Remove four hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Implement writepages rather than writepage by using write_cache_pages()
to call metapage_write_folio(). Use bio_add_folio_nofail() as we know
we just allocated the bio. Replace the call to SetPageError (which
is never checked) with a call to mapping_set_error (which ... might be
checked somewhere?)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Use bio_add_folio_nofail() as we just allocated the bio and know
it cannot fail. Other than that, this is a 1:1 conversion from
page APIs to folio APIs.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Currently a device is only really released once the umount returns to
userspace due to how file closing works. That ultimately could cause
an old umount assumption to be violated that concurrent umount and mount
don't fail. So an exclusively held device with a temporary holder should
be yielded before the filesystem is gone. Add a helper that allows
callers to do that. This also allows us to remove the two holder ops
that Linus wasn't excited about.
Link: https://lore.kernel.org/r/20240326-vfs-bdev-end_holder-v1-1-20af85202918@kernel.org
Fixes: f3a608827d1f ("bdev: open block device as files") # mainline only
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, isofs, udf, and quota updates from Jan Kara:
"A lot of material this time:
- removal of a lot of GFP_NOFS usage from ext2, udf, quota (either it
was legacy or replaced with scoped memalloc_nofs_*() API)
- removal of BUG_ONs in quota code
- conversion of UDF to the new mount API
- tightening quota on disk format verification
- fix some potentially unsafe use of RCU pointers in quota code and
annotate everything properly to make sparse happy
- a few other small quota, ext2, udf, and isofs fixes"
* tag 'fs_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (26 commits)
udf: remove SLAB_MEM_SPREAD flag usage
quota: remove SLAB_MEM_SPREAD flag usage
isofs: remove SLAB_MEM_SPREAD flag usage
ext2: remove SLAB_MEM_SPREAD flag usage
ext2: mark as deprecated
udf: convert to new mount API
udf: convert novrs to an option flag
MAINTAINERS: add missing git address for ext2 entry
quota: Detect loops in quota tree
quota: Properly annotate i_dquot arrays with __rcu
quota: Fix rcu annotations of inode dquot pointers
isofs: handle CDs with bad root inode but good Joliet root directory
udf: Avoid invalid LVID used on mount
quota: Fix potential NULL pointer dereference
quota: Drop GFP_NOFS instances under dquot->dq_lock and dqio_sem
quota: Set nofs allocation context when acquiring dqio_sem
ext2: Remove GFP_NOFS use in ext2_xattr_cache_insert()
ext2: Drop GFP_NOFS use in ext2_get_blocks()
ext2: Drop GFP_NOFS allocation from ext2_init_block_alloc_info()
udf: Remove GFP_NOFS allocation in udf_expand_file_adinicb()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Misc features, cleanups, and fixes for vfs and individual filesystems.
Features:
- Support idmapped mounts for hugetlbfs.
- Add RWF_NOAPPEND flag for pwritev2(). This allows us to fix a bug
where the passed offset is ignored if the file is O_APPEND. The new
flag allows a caller to enforce that the offset is honored to
conform to posix even if the file was opened in append mode.
- Move i_mmap_rwsem in struct address_space to avoid false sharing
between i_mmap and i_mmap_rwsem.
- Convert efs, qnx4, and coda to use the new mount api.
- Add a generic is_dot_dotdot() helper that's used by various
filesystems and the VFS code instead of open-coding it multiple
times.
- Recently we've added stable offsets which allows stable ordering
when iterating directories exported through NFS on e.g., tmpfs
filesystems. Originally an xarray was used for the offset map but
that caused slab fragmentation issues over time. This switches the
offset map to the maple tree which has a dense mode that handles
this scenario a lot better. Includes tests.
- Finally merge the case-insensitive improvement series Gabriel has
been working on for a long time. This cleanly propagates case
insensitive operations through ->s_d_op which in turn allows us to
remove the quite ugly generic_set_encrypted_ci_d_ops() operations.
It also improves performance by trying a case-sensitive comparison
first and then fallback to case-insensitive lookup if that fails.
This also fixes a bug where overlayfs would be able to be mounted
over a case insensitive directory which would lead to all sort of
odd behaviors.
Cleanups:
- Make file_dentry() a simple accessor now that ->d_real() is
simplified because of the backing file work we did the last two
cycles.
- Use the dedicated file_mnt_idmap helper in ntfs3.
- Use smp_load_acquire/store_release() in the i_size_read/write
helpers and thus remove the hack to handle i_size reads in the
filemap code.
- The SLAB_MEM_SPREAD is a nop now. Remove it from various places in
fs/
- It's no longer necessary to perform a second built-in initramfs
unpack call because we retain the contents of the previous
extraction. Remove it.
- Now that we have removed various allocators kfree_rcu() always
works with kmem caches and kmalloc(). So simplify various places
that only use an rcu callback in order to handle the kmem cache
case.
- Convert the pipe code to use a lockdep comparison function instead
of open-coding the nesting making lockdep validation easier.
- Move code into fs-writeback.c that was located in a header but can
be made static as it's only used in that one file.
- Rewrite the alignment checking iterators for iovec and bvec to be
easier to read, and also significantly more compact in terms of
generated code. This saves 270 bytes of text on x86-64 (with
clang-18) and 224 bytes on arm64 (with gcc-13). In profiles it also
saves a bit of time for the same workload.
- Switch various places to use KMEM_CACHE instead of
kmem_cache_create().
- Use inode_set_ctime_to_ts() in inode_set_ctime_current()
- Use kzalloc() in name_to_handle_at() to avoid kernel infoleak.
- Various smaller cleanups for eventfds.
Fixes:
- Fix various comments and typos, and unneeded initializations.
- Fix stack allocation hack for clang in the select code.
- Improve dump_mapping() debug code on a best-effort basis.
- Fix build errors in various selftests.
- Avoid wrap-around instrumentation in various places.
- Don't allow user namespaces without an idmapping to be used for
idmapped mounts.
- Fix sysv sb_read() call.
- Fix fallback implementation of the get_name() export operation"
* tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (70 commits)
hugetlbfs: support idmapped mounts
qnx4: convert qnx4 to use the new mount api
fs: use inode_set_ctime_to_ts to set inode ctime to current time
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
efs: remove SLAB_MEM_SPREAD flag usage
jfs: remove SLAB_MEM_SPREAD flag usage
minix: remove SLAB_MEM_SPREAD flag usage
openpromfs: remove SLAB_MEM_SPREAD flag usage
proc: remove SLAB_MEM_SPREAD flag usage
qnx6: remove SLAB_MEM_SPREAD flag usage
...
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224134925.829677-1-chengming.zhou@linux.dev
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-23-adbd023e19cc@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add two new helpers to allow opening block devices as files.
This is not the final infrastructure. This still opens the block device
before opening a struct a file. Until we have removed all references to
struct bdev_handle we can't switch the order:
* Introduce blk_to_file_flags() to translate from block specific to
flags usable to pen a new file.
* Introduce bdev_file_open_by_{dev,path}().
* Introduce temporary sb_bdev_handle() helper to retrieve a struct
bdev_handle from a block device file and update places that directly
reference struct bdev_handle to rely on it.
* Don't count block device openes against the number of open files. A
bdev_file_open_by_{dev,path}() file is never installed into any
file descriptor table.
One idea that came to mind was to use kernel_tmpfile_open() which
would require us to pass a path and it would then call do_dentry_open()
going through the regular fops->open::blkdev_open() path. But then we're
back to the problem of routing block specific flags such as
BLK_OPEN_RESTRICT_WRITES through the open path and would have to waste
FMODE_* flags every time we add a new one. With this we can avoid using
a flag bit and we have more leeway in how we open block devices from
bdev_open_by_{dev,path}().
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-1-adbd023e19cc@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Dquots pointed to from i_dquot arrays in inodes are protected by
dquot_srcu. Annotate them as such and change .get_dquots callback to
return properly annotated pointer to make sparse happy.
Fixes: b9ba6f94b238 ("quota: remove dqptr_sem")
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This reverts commit cca974daeb6c43ea971f8ceff5a7080d7d49ee30.
The added sanity check is incorrect. BUDMIN is not the wrong value and
is too small.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
The kernel thread function jfs_lazycommit() and jfs_sync() invoke the
try_to_freeze() in its loop. But all the kernel threads are no-freezable
by default. So if we want to make a kernel thread to be freezable, we have
to invoke set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
[Syz report]
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_imap.c:2360:2
index -878706688 is out of range for type 'struct iagctl[128]'
CPU: 1 PID: 5065 Comm: syz-executor282 Not tainted 6.7.0-rc4-syzkaller-00009-gbee0e7762ad2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
diNewExt+0x3cf3/0x4000 fs/jfs/jfs_imap.c:2360
diAllocExt fs/jfs/jfs_imap.c:1949 [inline]
diAllocAG+0xbe8/0x1e50 fs/jfs/jfs_imap.c:1666
diAlloc+0x1d3/0x1760 fs/jfs/jfs_imap.c:1587
ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
jfs_mkdir+0x1c5/0xb90 fs/jfs/namei.c:225
vfs_mkdir+0x2f1/0x4b0 fs/namei.c:4106
do_mkdirat+0x264/0x3a0 fs/namei.c:4129
__do_sys_mkdir fs/namei.c:4149 [inline]
__se_sys_mkdir fs/namei.c:4147 [inline]
__x64_sys_mkdir+0x6e/0x80 fs/namei.c:4147
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fcb7e6a0b57
Code: ff ff 77 07 31 c0 c3 0f 1f 40 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 b8 53 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd83023038 EFLAGS: 00000286 ORIG_RAX: 0000000000000053
RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fcb7e6a0b57
RDX: 00000000000a1020 RSI: 00000000000001ff RDI: 0000000020000140
RBP: 0000000020000140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000286 R12: 00007ffd830230d0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[Analysis]
When the agstart is too large, it can cause agno overflow.
[Fix]
After obtaining agno, if the value is invalid, exit the subsequent process.
Reported-and-tested-by: syzbot+553d90297e6d2f50dbc7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Modified the test from agno > MAXAG to agno >= MAXAG based on linux-next
report by kernel test robot (Dan Carpenter).
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Currently while joining the leaf in a buddy system there is shift out
of bound error in calculation of BUDSIZE. Added the required check
to the BUDSIZE and fixed the documentation as well.
Reported-by: syzbot+411debe54d318eaed386@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=411debe54d318eaed386
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
When the execution of diMount(ipimap) fails, the object ipimap that has been
released may be accessed in diFreeSpecial(). Asynchronous ipimap release occurs
when rcu_core() calls jfs_free_node().
Therefore, when diMount(ipimap) fails, sbi->ipimap should not be initialized as
ipimap.
Reported-and-tested-by: syzbot+01cf2dbcbe2022454388@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Currently there is a bound check missing in the dbAdjTree while
accessing the dmt_stree. To add the required check added the bool is_ctl
which is required to determine the size as suggest in the following
commit.
https://lore.kernel.org/linux-kernel-mentees/f9475918-2186-49b8-b801-6f0f9e75f4fa@oracle.com/
Reported-by: syzbot+39ba34a099ac2e9bd3cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=39ba34a099ac2e9bd3cb
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Currently while searching for current page in the sorted entry table
of the page there is a out of bound access. Added a bound check to fix
the error.
Dave:
Set return code to -EIO
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202310241724.Ed02yUz9-lkp@intel.com/
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Syzkaller reported the following issue:
oop0: detected capacity change from 0 to 32768
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9
index -2 is out of range for type 'struct dtslot [128]'
CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283
dtSplitRoot+0x8d8/0x1900 fs/jfs/jfs_dtree.c:1971
dtSplitUp fs/jfs/jfs_dtree.c:985 [inline]
dtInsert+0x1189/0x6b80 fs/jfs/jfs_dtree.c:863
jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270
vfs_mkdir+0x3b3/0x590 fs/namei.c:4013
do_mkdirat+0x279/0x550 fs/namei.c:4038
__do_sys_mkdirat fs/namei.c:4053 [inline]
__se_sys_mkdirat fs/namei.c:4051 [inline]
__x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fcdc0113fd9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000102
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9
RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003
RBP: 00007fcdc00d37a0 R08: 0000000000000000 R09: 00007fcdc00d37a0
R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000
R13: 0000000000000000 R14: 00083878000000f8 R15: 0000000000000000
</TASK>
The issue is caused when the value of fsi becomes less than -1.
The check to break the loop when fsi value becomes -1 is present
but syzbot was able to produce value less than -1 which cause the error.
This patch simply add the change for the values less than 0.
The patch is tested via syzbot.
Reported-and-tested-by: syzbot+d4b1df2e9d4ded6488ec@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d4b1df2e9d4ded6488ec
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Syzkaller reported the following issue:
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:2867:6
index 196694 is out of range for type 's8[1365]' (aka 'signed char[1365]')
CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867
dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834
dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331
dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline]
dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402
txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534
txUpdateMap+0x342/0x9e0
txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline]
jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732
kthread+0x2d3/0x370 kernel/kthread.c:388
ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
</TASK>
================================================================================
Kernel panic - not syncing: UBSAN: panic_on_warn set ...
CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
panic+0x30f/0x770 kernel/panic.c:340
check_panic_on_warn+0x82/0xa0 kernel/panic.c:236
ubsan_epilogue lib/ubsan.c:223 [inline]
__ubsan_handle_out_of_bounds+0x13c/0x150 lib/ubsan.c:348
dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867
dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834
dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331
dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline]
dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402
txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534
txUpdateMap+0x342/0x9e0
txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline]
jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732
kthread+0x2d3/0x370 kernel/kthread.c:388
ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
</TASK>
Kernel Offset: disabled
Rebooting in 86400 seconds..
The issue is caused when the value of lp becomes greater than
CTLTREESIZE which is the max size of stree. Adding a simple check
solves this issue.
Dave:
As the function returns a void, good error handling
would require a more intrusive code reorganization, so I modified
Osama's patch at use WARN_ON_ONCE for lack of a cleaner option.
The patch is tested via syzbot.
Reported-by: syzbot+39ba34a099ac2e9bd3cb@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=39ba34a099ac2e9bd3cb
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fanotify fsid updates from Christian Brauner:
"This work is part of the plan to enable fanotify to serve as a drop-in
replacement for inotify. While inotify is availabe on all filesystems,
fanotify currently isn't.
In order to support fanotify on all filesystems two things are needed:
(1) all filesystems need to support AT_HANDLE_FID
(2) all filesystems need to report a non-zero f_fsid
This contains (1) and allows filesystems to encode non-decodable file
handlers for fanotify without implementing any exportfs operations by
encoding a file id of type FILEID_INO64_GEN from i_ino and
i_generation.
Filesystems that want to opt out of encoding non-decodable file ids
for fanotify that don't support NFS export can do so by providing an
empty export_operations struct.
This also partially addresses (2) by generating f_fsid for simple
filesystems as well as freevxfs. Remaining filesystems will be dealt
with by separate patches.
Finally, this contains the patch from the current exportfs maintainers
which moves exportfs under vfs with Chuck, Jeff, and Amir as
maintainers and vfs.git as tree"
* tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
MAINTAINERS: create an entry for exportfs
fs: fix build error with CONFIG_EXPORTFS=m or not defined
freevxfs: derive f_fsid from bdev->bd_dev
fs: report f_fsid from s_dev for "simple" filesystems
exportfs: support encoding non-decodeable file handles by default
exportfs: define FILEID_INO64_GEN* file handle types
exportfs: make ->encode_fh() a mandatory method for NFS export
exportfs: add helpers to check if filesystem can encode/decode file handles
|
|
Pull jfs updates from Dave Kleikamp:
"Minor stability improvements"
* tag 'jfs-6.7' of https://github.com/kleikamp/linux-shaggy:
jfs: define xtree root and page independently
jfs: fix array-index-out-of-bounds in diAlloc
jfs: fix array-index-out-of-bounds in dbFindLeaf
fs/jfs: Add validity check for db_maxag and db_agpref
fs/jfs: Add check for negative db_l2nbperpage
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner:
"The 's_xattr' field of 'struct super_block' currently requires a
mutable table of 'struct xattr_handler' entries (although each handler
itself is const). However, no code in vfs actually modifies the
tables.
This changes the type of 's_xattr' to allow const tables, and modifies
existing file systems to move their tables to .rodata. This is
desirable because these tables contain entries with function pointers
in them; moving them to .rodata makes it considerably less likely to
be modified accidentally or maliciously at runtime"
* tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
const_structs.checkpatch: add xattr_handler
net: move sockfs_xattr_handlers to .rodata
shmem: move shmem_xattr_handlers to .rodata
overlayfs: move xattr tables to .rodata
xfs: move xfs_xattr_handlers to .rodata
ubifs: move ubifs_xattr_handlers to .rodata
squashfs: move squashfs_xattr_handlers to .rodata
smb: move cifs_xattr_handlers to .rodata
reiserfs: move reiserfs_xattr_handlers to .rodata
orangefs: move orangefs_xattr_handlers to .rodata
ocfs2: move ocfs2_xattr_handlers and ocfs2_xattr_handler_map to .rodata
ntfs3: move ntfs_xattr_handlers to .rodata
nfs: move nfs4_xattr_handlers to .rodata
kernfs: move kernfs_xattr_handlers to .rodata
jfs: move jfs_xattr_handlers to .rodata
jffs2: move jffs2_xattr_handlers to .rodata
hfsplus: move hfsplus_xattr_handlers to .rodata
hfs: move hfs_xattr_handlers to .rodata
gfs2: move gfs2_xattr_handlers_max to .rodata
fuse: move fuse_xattr_handlers to .rodata
...
|
|
Rename the default helper for encoding FILEID_INO32_GEN* file handles to
generic_encode_ino32_fh() and convert the filesystems that used the
default implementation to use the generic helper explicitly.
After this change, exportfs_encode_inode_fh() no longer has a default
implementation to encode FILEID_INO32_GEN* file handles.
This is a step towards allowing filesystems to encode non-decodeable
file handles for fanotify without having to implement any
export_operations.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-3-amir73il@gmail.com
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When sbi->flag is JFS_NOINTEGRITY in lmLogOpen(), log->bdev_handle can't
be inited, so it value will be NULL.
Therefore, add the "log ->no_integrity=1" judgment in lbmStartIO() to avoid such
problems.
Reported-and-tested-by: syzbot+23bc20037854bb335d59@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://lore.kernel.org/r/20231009094557.1398920-1-lizhi.xu@windriver.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert jfs to use bdev_open_by_dev() and pass the handle around.
CC: Dave Kleikamp <shaggy@kernel.org>
CC: jfs-discussion@lists.sourceforge.net
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-24-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert to using the new inode timestamp accessor functions.
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-46-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In order to make array bounds checking sane, provide a separate
definition of the in-inode xtree root and the external xtree page.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Tested-by: Manas Ghandat <ghandatmanas@gmail.com>
|
|
This makes it harder for accidental or malicious changes to
jfs_xattr_handlers at runtime.
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: jfs-discussion@lists.sourceforge.net
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20230930050033.41174-17-wedsonaf@gmail.com
Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently there is not check against the agno of the iag while
allocating new inodes to avoid fragmentation problem. Added the check
which is required.
Reported-by: syzbot+79d792676d8ac050949f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=79d792676d8ac050949f
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Currently while searching for dmtree_t for sufficient free blocks there
is an array out of bounds while getting element in tp->dm_stree. To add
the required check for out of bound we first need to determine the type
of dmtree. Thus added an extra parameter to dbFindLeaf so that the type
of tree can be determined and the required check can be applied.
Reported-by: syzbot+aea1ad91e854d0a83e04@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=aea1ad91e854d0a83e04
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Both db_maxag and db_agpref are used as the index of the
db_agfree array, but there is currently no validity check for
db_maxag and db_agpref, which can lead to errors.
The following is related bug reported by Syzbot:
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20
index 7936 is out of range for type 'atomic_t[128]'
Add checking that the values of db_maxag and db_agpref are valid
indexes for the db_agfree array.
Reported-by: syzbot+38e876a8aa44b7115c76@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=38e876a8aa44b7115c76
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
l2nbperpage is log2(number of blks per page), and the minimum legal
value should be 0, not negative.
In the case of l2nbperpage being negative, an error will occur
when subsequently used as shift exponent.
Syzbot reported this bug:
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12
shift exponent -16777216 is negative
Reported-by: syzbot+debee9ab7ae2b34b0307@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=debee9ab7ae2b34b0307
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
