Age | Commit message (Collapse) | Author | Files | Lines |
|
In addition to the benefits of using an enum rather than a set of
macros, we now have a named type that can improve static type
checking of function return values.
As part of this change, I removed a stale comment from svcauth.h;
the return values from current implementations of the
auth_ops::release method are all zero/negative errno, not the SVC_OK
enum values as the old comment suggested.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Most svc threads have no interest in a timeout.
nfsd sets it to 1 hour, but this is a wart of no significance.
lockd uses the timeout so that it can call nlmsvc_retry_blocked().
It also sometimes calls svc_wake_up() to ensure this is called.
So change lockd to be consistent and always use svc_wake_up() to trigger
nlmsvc_retry_blocked() - using a timer instead of a timeout to
svc_recv().
And change svc_recv() to not take a timeout arg.
This makes the sp_threads_timedout counter always zero.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_recv() currently returns a 0 on success or one of two errors:
- -EAGAIN means no message was successfully received
- -EINTR means the thread has been told to stop
Previously nfsd would stop as the result of a signal as well as
following kthread_stop(). In that case the difference was useful: EINTR
means stop unconditionally. EAGAIN means stop if kthread_should_stop(),
continue otherwise.
Now threads only exit when kthread_should_stop() so we don't need the
distinction.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
All callers of svc_recv() go on to call svc_process() on success.
Simplify callers by having svc_recv() do that for them.
This loses one call to validate_process_creds() in nfsd. That was
debugging code added 14 years ago. I don't think we need to keep it.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
lockd allows SIGKILL and responds by dropping all locks and restarting
the grace period. This functionality has been present since 2.1.32 when
lockd was added to Linux.
This functionality is undocumented and most likely added as a useful
debug aid. When there is a need to drop locks, the better approach is
to use /proc/fs/nfsd/unlock_*.
This patch removes SIGKILL handling as part of preparation for removing
all signal handling from sunrpc service threads.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The below-mentioned patch was intended to simplify refcounting on the
svc_serv used by locked. The goal was to only ever have a single
reference from the single thread. To that end we dropped a call to
lockd_start_svc() (except when creating thread) which would take a
reference, and dropped the svc_put(serv) that would drop that reference.
Unfortunately we didn't also remove the svc_get() from
lockd_create_svc() in the case where the svc_serv already existed.
So after the patch:
- on the first call the svc_serv was allocated and the one reference
was given to the thread, so there are no extra references
- on subsequent calls svc_get() was called so there is now an extra
reference.
This is clearly not consistent.
The inconsistency is also clear in the current code in lockd_get()
takes *two* references, one on nlmsvc_serv and one by incrementing
nlmsvc_users. This clearly does not match lockd_put().
So: drop that svc_get() from lockd_get() (which used to be in
lockd_create_svc().
Reported-by: Ido Schimmel <idosch@idosch.org>
Closes: https://lore.kernel.org/linux-nfs/ZHsI%2FH16VX9kJQX1@shredder/T/#u
Fixes: b73a2972041b ("lockd: move lockd_start_svc() call into lockd_create_svc()")
Signed-off-by: NeilBrown <neilb@suse.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- A collection of minor bug fixes
* tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Remove open coding of string copy
SUNRPC: Fix trace_svc_register() call site
SUNRPC: always free ctxt when freeing deferred request
SUNRPC: double free xprt_ctxt while still in use
SUNRPC: Fix error handling in svc_setup_socket()
SUNRPC: Fix encoding of accepted but unsuccessful RPC replies
lockd: define nlm_port_min,max with CONFIG_SYSCTL
nfsd: define exports_proc_ops with CONFIG_PROC_FS
SUNRPC: Avoid relying on crypto API to derive CBC-CTS output IV
|
|
gcc with W=1 and ! CONFIG_SYSCTL
fs/lockd/svc.c:80:51: error: ‘nlm_port_max’ defined but not used [-Werror=unused-const-variable=]
80 | static const int nlm_port_min = 0, nlm_port_max = 65535;
| ^~~~~~~~~~~~
fs/lockd/svc.c:80:33: error: ‘nlm_port_min’ defined but not used [-Werror=unused-const-variable=]
80 | static const int nlm_port_min = 0, nlm_port_max = 65535;
| ^~~~~~~~~~~~
The only use of these variables is when CONFIG_SYSCTL
is defined, so their definition should be likewise conditional.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There is no need to declare two tables to just create directories,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl update from Luis Chamberlain:
"Just one fix which just came in.
Sadly the eager beavers willing to help with the sysctl moves have
slowed"
* tag 'sysctl-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: fix proc_dobool() usability
|
|
Currently proc_dobool expects a (bool *) in table->data, but sizeof(int)
in table->maxsize, because it uses do_proc_dointvec() directly.
This is unsafe for at least two reasons:
1. A sysctl table definition may use { .data = &variable, .maxsize =
sizeof(variable) }, not realizing that this makes the sysctl unusable
(see the Fixes: tag) and that they need to use the completely
counterintuitive sizeof(int) instead.
2. proc_dobool() will currently try to parse an array of values if given
.maxsize >= 2*sizeof(int), but will try to write values of type bool
by offsets of sizeof(int), so it will not work correctly with neither
an (int *) nor a (bool *). There is no .maxsize validation to prevent
this.
Fix this by:
1. Constraining proc_dobool() to allow only one value and .maxsize ==
sizeof(bool).
2. Wrapping the original struct ctl_table in a temporary one with .data
pointing to a local int variable and .maxsize set to sizeof(int) and
passing this one to proc_dointvec(), converting the value to/from
bool as needed (using proc_dou8vec_minmax() as an example).
3. Extending sysctl_check_table() to enforce proc_dobool() expectations.
4. Fixing the proc_dobool() docstring (it was just copy-pasted from
proc_douintvec, apparently...).
5. Converting all existing proc_dobool() users to set .maxsize to
sizeof(bool) instead of sizeof(int).
Fixes: 83efeeeb3d04 ("tty: Allow TIOCSTI to be disabled")
Fixes: a2071573d634 ("sysctl: introduce new proc handler proc_dobool")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
- Improves counting accuracy
- Reduces cross-CPU memory traffic
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, svcauth_gss_accept() pre-reserves response buffer space
for the RPC payload length and GSS sequence number before returning
to the dispatcher, which then adds the header's accept_stat field.
The problem is the accept_stat field is supposed to go before the
length and seq_num fields. So svcauth_gss_release() has to relocate
the accept_stat value (see svcauth_gss_prepare_to_wrap()).
To enable these fields to be added to the response buffer in the
correct (final) order, the pointer to the accept_stat has to be made
available to svcauth_gss_accept() so that it can set it before
reserving space for the length and seq_num fields.
As a first step, move the pointer to the location of the accept_stat
field into struct svc_rqst.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that all vs_dispatch functions invoke svcxdr_init_encode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that all vs_dispatch functions invoke svcxdr_init_decode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Hoist svo_function back into svc_serv and remove struct
svc_serv_ops, since the struct is now devoid of fields.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
struct svc_serv_ops is about to be removed.
Neil Brown says:
> I suspect svo_module can go as well - I don't think the thread is
> ever the thing that primarily keeps a module active.
A random sample of kthread_create() callers shows sunrpc is the only
one that manages module reference count in this way.
Suggested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: svc_shutdown_net() now does nothing but call
svc_close_net(). Replace all external call sites.
svc_close_net() is renamed to be the inverse of svc_xprt_create().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Use the "svc_xprt_<task>" function naming convention as
is used for other external APIs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up. Neil observed that "any code that calls svc_shutdown_net()
knows what the shutdown function should be, and so can call it
directly."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
|
|
We have never been able to track down and address the underlying
cause of the performance issues with workqueue-based service
support. svo_enqueue_xprt is called multiple times per RPC, so
it adds instruction path length, but always ends up at the same
function: svc_xprt_do_enqueue(). We do not anticipate needing
this flexibility for dynamic nfsd thread management support.
As a micro-optimization, remove .svo_enqueue_xprt because
Spectre/Meltdown makes virtual function calls more costly.
This change essentially reverts commit b9e13cdfac70 ("nfsd/sunrpc:
turn enqueueing a svc_xprt into a svc_serv operation").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
|
svc_set_num_threads() does everything that lockd_start_svc() does, except
set sv_maxconn. It also (when passed 0) finds the threads and
stops them with kthread_stop().
So move the setting for sv_maxconn, and use svc_set_num_thread()
We now don't need nlmsvc_task.
Now that we use svc_set_num_threads() it makes sense to set svo_module.
This request that the thread exists with module_put_and_exit().
Also fix the documentation for svo_module to make this explicit.
svc_prepare_thread is now only used where it is defined, so it can be
made static.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
lockd_create_svc() already does an svc_get() if the service already
exists, so it is more like a "get" than a "create".
So:
- Move the increment of nlmsvc_users into the function as well
- rename to lockd_get().
It is now the inverse of lockd_put().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There is some cleanup that is duplicated in lockd_down() and the failure
path of lockd_up().
Factor these out into a new lockd_put() and call it from both places.
lockd_put() does *not* take the mutex - that must be held by the caller.
It decrements nlmsvc_users and if that reaches zero, it cleans up.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The normal place to call svc_exit_thread() is from the thread itself
just before it exists.
Do this for lockd.
This means that nlmsvc_rqst is not used out side of lockd_start_svc(),
so it can be made local to that function, and renamed to 'rqst'.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
lockd_start_svc() only needs to be called once, just after the svc is
created. If the start fails, the svc is discarded too.
It thus makes sense to call lockd_start_svc() from lockd_create_svc().
This allows us to remove the test against nlmsvc_rqst at the start of
lockd_start_svc() - it must always be NULL.
lockd_up() only held an extra reference on the svc until a thread was
created - then it dropped it. The thread - and thus the extra reference
- will remain until kthread_stop() is called.
Now that the thread is created in lockd_create_svc(), the extra
reference can be dropped there. So the 'serv' variable is no longer
needed in lockd_up().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that the network status notifiers use nlmsvc_serv rather then
nlmsvc_rqst the management can be simplified.
Notifier unregistration synchronises with any pending notifications so
providing we unregister before nlm_serv is freed no further interlock
is required.
So we move the unregister call to just before the thread is killed
(which destroys the service) and just before the service is destroyed in
the failure-path of lockd_up().
Then nlm_ntf_refcnt and nlm_ntf_wq can be removed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
lockd has two globals - nlmsvc_task and nlmsvc_rqst - but mostly it
wants the 'struct svc_serv', and when it doesn't want it exactly it can
get to what it wants from the serv.
This patch is a first step to removing nlmsvc_task and nlmsvc_rqst. It
introduces nlmsvc_serv to store the 'struct svc_serv*'. This is set as
soon as the serv is created, and cleared only when it is destroyed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The use of sv_nrthreads as a general refcount results in clumsy code, as
is seen by various comments needed to explain the situation.
This patch introduces a 'struct kref' and uses that for reference
counting, leaving sv_nrthreads to be a pure count of threads. The kref
is managed particularly in svc_get() and svc_put(), and also nfsd_put();
svc_destroy() now takes a pointer to the embedded kref, rather than to
the serv.
nfsd allows the svc_serv to exist with ->sv_nrhtreads being zero. This
happens when a transport is created before the first thread is started.
To support this, a 'keep_active' flag is introduced which holds a ref on
the svc_serv. This is set when any listening socket is successfully
added (unless there are running threads), and cleared when the number of
threads is set. So when the last thread exits, the nfs_serv will be
destroyed.
The use of 'keep_active' replaces previous code which checked if there
were any permanent sockets.
We no longer clear ->rq_server when nfsd() exits. This was done
to prevent svc_exit_thread() from calling svc_destroy().
Instead we take an extra reference to the svc_serv to prevent
svc_destroy() from being called.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_destroy() is poorly named - it doesn't necessarily destroy the svc,
it might just reduce the ref count.
nfsd_destroy() is poorly named for the same reason.
This patch:
- removes the refcount functionality from svc_destroy(), moving it to
a new svc_put(). Almost all previous callers of svc_destroy() now
call svc_put().
- renames nfsd_destroy() to nfsd_put() and improves the code, using
the new svc_destroy() rather than svc_put()
- removes a few comments that explain the important for balanced
get/put calls. This should be obvious.
The only non-trivial part of this is that svc_destroy() would call
svc_sock_update() on a non-final decrement. It can no longer do that,
and svc_put() isn't really a good place of it. This call is now made
from svc_exit_thread() which seems like a good place. This makes the
call *before* sv_nrthreads is decremented rather than after. This
is not particularly important as the call just sets a flag which
causes sv_nrthreads set be checked later. A subsequent patch will
improve the ordering.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It is common for 'get' functions to return the object that was 'got',
and there are a couple of places where users of svc_get() would be a
little simpler if svc_get() did that.
Make it so.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR encoder, and can be removed.
Note also that there is a line in each encoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per encoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR decoder, and can be removed.
Note also that there is a line in each decoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per decoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Better client responsiveness when server isn't replying
- Use refcount_t in sunrpc rpc_client refcount tracking
- Add srcaddr and dst_port to the sunrpc sysfs info files
- Add basic support for connection sharing between servers with multiple NICs`
Bugfixes and Cleanups:
- Sunrpc tracepoint cleanups
- Disconnect after ib_post_send() errors to avoid deadlocks
- Fix for tearing down rpcrdma_reps
- Fix a potential pNFS layoutget livelock loop
- pNFS layout barrier fixes
- Fix a potential memory corruption in rpc_wake_up_queued_task_set_status()
- Fix reconnection locking
- Fix return value of get_srcport()
- Remove rpcrdma_post_sends()
- Remove pNFS dead code
- Remove copy size restriction for inter-server copies
- Overhaul the NFS callback service
- Clean up sunrpc TCP socket shutdowns
- Always provide aligned buffers to RPC read layers"
* tag 'nfs-for-5.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (39 commits)
NFS: Always provide aligned buffers to the RPC read layers
NFSv4.1 add network transport when session trunking is detected
SUNRPC enforce creation of no more than max_connect xprts
NFSv4 introduce max_connect mount options
SUNRPC add xps_nunique_destaddr_xprts to xprt_switch_info in sysfs
SUNRPC keep track of number of transports to unique addresses
NFSv3: Delete duplicate judgement in nfs3_async_handle_jukebox
SUNRPC: Tweak TCP socket shutdown in the RPC client
SUNRPC: Simplify socket shutdown when not reusing TCP ports
NFSv4.2: remove restriction of copy size for inter-server copy.
NFS: Clean up the synopsis of callback process_op()
NFS: Extract the xdr_init_encode/decode() calls from decode_compound
NFS: Remove unused callback void decoder
NFS: Add a private local dispatcher for NFSv4 callback operations
SUNRPC: Eliminate the RQ_AUTHERR flag
SUNRPC: Set rq_auth_stat in the pg_authenticate() callout
SUNRPC: Add svc_rqst::rq_auth_stat
SUNRPC: Add dst_port to the sysfs xprt info file
SUNRPC: Add srcaddr as a file in sysfs
sunrpc: Fix return value of get_srcport()
...
|
|
nsm_use_hostnames is a module parameter and it will be exported to sysctl
procfs. This is to let user sometimes change it from userspace. But the
minimal unit for sysctl procfs read/write it sizeof(int).
In big endian system, the converting from/to bool to/from int will cause
error for proc items.
This patch use a new proc_handler proc_dobool to fix it.
Signed-off-by: Jia He <hejianet@gmail.com>
Reviewed-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
[thuth: Fix typo in commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In a few moments, rq_auth_stat will need to be explicitly set to
rpc_auth_ok before execution gets to the dispatcher.
svc_authenticate() already sets it, but it often gets reset to
rpc_autherr_badcred right after that call, even when authentication
is successful. Let's ensure that the pg_authenticate callout and
svc_set_client() set it properly in every case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
To enable xdr_stream-based encoding and decoding, create a bespoke
RPC dispatch function for the lockd service.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When starting up a new knfsd server, pass the user cred to the
supporting lockd server.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
In order to be able to interpret uids and gids correctly in knfsd, we
should cache the user namespace of the process that created the RPC
server's listener. To do so, we refcount the credential of that process.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Add a callback to allow customisation of the rpcbind registration.
When clients have the ability to turn on and off version support,
we want to allow them to also prevent registration of those
versions with the rpc portmapper.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Add a callback to help initialise server requests before they are
processed. This will allow us to clean up the NFS server version
support, and to make it container safe.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The variables nlm_ntf_refcnt and nlm_ntf_wq are local to the source and
do not need to be in global scope, so make them static.
Cleans up sparse warnings:
fs/lockd/svc.c:60:10: warning: symbol 'nlm_ntf_refcnt' was not declared.
Should it be static?
fs/lockd/svc.c:61:1: warning: symbol 'nlm_ntf_wq' was not declared.
Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
lockd_inet[6]addr_event use nlmsvc_rqst without taken nlmsvc_mutex,
nlmsvc_rqst can be changed during execution of notifiers and crash the host.
Patch enables access to nlmsvc_rqst only when it was correctly initialized
and delays its cleanup until notifiers are no longer in use.
Note that nlmsvc_rqst can be temporally set to ERR_PTR, so the "if
(nlmsvc_rqst)" check in notifiers is insufficient on its own.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Commit efda760fe95ea ("lockd: fix lockd shutdown race") is incorrect,
it removes lockd_manager and disarm grace_period_end for init_net only.
If nfsd was started from another net namespace lockd_up_net() calls
set_grace_period() that adds lockd_manager into per-netns list
and queues grace_period_end delayed work.
These action should be reverted in lockd_down_net().
Otherwise it can lead to double list_add on after restart nfsd in netns,
and to use-after-free if non-disarmed delayed work will be executed after netns destroy.
Fixes: efda760fe95e ("lockd: fix lockd shutdown race")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Publishing of net pointer is not safe,
use net->ns.inum as net ID in debug messages
[ 171.757678] lockd_up_net: per-net data created; net=f00001e7
[ 171.767188] NFSD: starting 90-second grace period (net f00001e7)
[ 300.653313] lockd: nuking all hosts in net f00001e7...
[ 300.653641] lockd: host garbage collection for net f00001e7
[ 300.653968] lockd: nlmsvc_mark_resources for net f00001e7
[ 300.711483] lockd_down_net: per-net data destroyed; net=f00001e7
[ 300.711847] lockd: nuking all hosts in net 0...
[ 300.711847] lockd: host garbage collection for net 0
[ 300.711848] lockd: nlmsvc_mark_resources for net 0
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Pull nfsd updates from Bruce Fields:
"Lots of good bugfixes, including:
- fix a number of races in the NFSv4+ state code
- fix some shutdown crashes in multiple-network-namespace cases
- relax our 4.1 session limits; if you've an artificially low limit
to the number of 4.1 clients that can mount simultaneously, try
upgrading"
* tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux: (22 commits)
SUNRPC: Improve ordering of transport processing
nfsd: deal with revoked delegations appropriately
svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
nfsd: use nfs->ns.inum as net ID
rpc: remove some BUG()s
svcrdma: Preserve CB send buffer across retransmits
nfds: avoid gettimeofday for nfssvc_boot time
fs, nfsd: convert nfs4_file.fi_ref from atomic_t to refcount_t
fs, nfsd: convert nfs4_cntl_odstate.co_odcount from atomic_t to refcount_t
fs, nfsd: convert nfs4_stid.sc_count from atomic_t to refcount_t
lockd: double unregister of inetaddr notifiers
nfsd4: catch some false session retries
nfsd4: fix cached replies to solo SEQUENCE compounds
sunrcp: make function _svc_create_xprt static
SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
nfsd: use ARRAY_SIZE
nfsd: give out fewer session slots as limit approaches
nfsd: increase DRC cache limit
nfsd: remove unnecessary nofilehandle checks
nfs_common: convert int to bool
...
|
|
lockd_up() can call lockd_unregister_notifiers twice:
inside lockd_start_svc() when it calls lockd_svc_exit_thread()
and then in error path of lockd_up()
Patch forces lockd_start_svc() to unregister notifiers in all error cases
and removes extra unregister in error path of lockd_up().
Fixes: cb7d224f82e4 "lockd: unregister notifier blocks if the service ..."
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|