| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
svc threads are currently stopped using kthread_stop(). This requires
identifying a specific thread. However we don't care which thread
stops, just as long as one does.
So instead, set a flag in the svc_pool to say that a thread needs to
die, and have each thread check this flag instead of calling
kthread_should_stop(). The first thread to find and clear this flag
then moves towards exiting.
This removes an explicit dependency on sp_all_threads which will make a
future patch simpler.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This patch fixes a race in async lock request handling between adding
the relevant struct nlm_block to nlm_blocked list after the request was
sent by vfs_lock_file() and nlmsvc_grant_deferred() does a lookup of the
nlm_block in the nlm_blocked list. It could be that the async request is
completed before the nlm_block was added to the list. This would end
in a -ENOENT and a kernel log message of "lockd: grant for unknown
block".
To solve this issue we add the nlm_block before the vfs_lock_file() call
to be sure it has been added when a possible nlmsvc_grant_deferred() is
called. If the vfs_lock_file() results in an case when it wouldn't be
added to nlm_blocked list, the nlm_block struct will be removed from
this list again.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This patch returns nlm_lck_blocked in nlmsvc_lock() when an asynchronous
lock request is pending. During testing I ran into the case with the
side-effects that lockd is waiting for only one lm_grant() callback
because it's already part of the nlm_blocked list. If another
asynchronous for the same nlm_block is triggered two lm_grant()
callbacks will occur but lockd was only waiting for one.
To avoid any change of existing users this handling will only being made
when export_op_support_safe_async_lock() returns true.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This patch reverts mostly commit 40595cdc93ed ("nfs: block notification
on fs with its own ->lock") and introduces an EXPORT_OP_ASYNC_LOCK
export flag to signal that the "own ->lock" implementation supports
async lock requests. The only main user is DLM that is used by GFS2 and
OCFS2 filesystem. Those implement their own lock() implementation and
return FILE_LOCK_DEFERRED as return value. Since commit 40595cdc93ed
("nfs: block notification on fs with its own ->lock") the DLM
implementation were never updated. This patch should prepare for DLM
to set the EXPORT_OP_ASYNC_LOCK export flag and update the DLM
plock implementation regarding to it.
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Most svc threads have no interest in a timeout.
nfsd sets it to 1 hour, but this is a wart of no significance.
lockd uses the timeout so that it can call nlmsvc_retry_blocked().
It also sometimes calls svc_wake_up() to ensure this is called.
So change lockd to be consistent and always use svc_wake_up() to trigger
nlmsvc_retry_blocked() - using a timer instead of a timeout to
svc_recv().
And change svc_recv() to not take a timeout arg.
This makes the sp_threads_timedout counter always zero.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This patch fixes races when lockd accesses the global nlm_blocked list.
It was mostly safe to access the list because everything was accessed
from the lockd kernel thread context but there exist cases like
nlmsvc_grant_deferred() that could manipulate the nlm_blocked list and
it can be called from any context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently lockd just dequeues the block and ignores it if the client
sends a GRANT_RES with a status of nlm_lck_denied. That status is an
indicator that the client has rejected the lock, so the right thing to
do is to unlock the lock we were trying to grant.
Reported-by: Yongcheng Yang <yoyang@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2063818
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We currently do a lock_to_openmode call based on the arguments from the
NLM_UNLOCK call, but that will always set the fl_type of the lock to
F_UNLCK, and the O_RDONLY descriptor is always chosen.
Fix it to use the file_lock from the block instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Shared locks are set on O_RDONLY descriptors and exclusive locks are set
on O_WRONLY ones. nlmsvc_unlock however calls vfs_lock_file twice, once
for each descriptor, but it doesn't reset fl_file. Ensure that it does.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Instead of trusting that struct file_lock returns completely unchanged
after vfs_test_lock() when there's no conflicting lock, stash away our
nlm_lockowner reference so we can properly release it for all cases.
This defends against another file_lock implementation overwriting fl_owner
when the return type is F_UNLCK.
Reported-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Tested-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
NFSv4.1 supports an optional lock notification feature which notifies
the client when a lock comes available. (Normally NFSv4 clients just
poll for locks if necessary.) To make that work, we need to request a
blocking lock from the filesystem.
We turned that off for NFS in commit f657f8eef3ff ("nfs: don't atempt
blocking locks on nfs reexports") [sic] because it actually blocks the
nfsd thread while waiting for the lock.
Thanks to Vasily Averin for pointing out that NFS isn't the only
filesystem with that problem.
Any filesystem that leaves ->lock NULL will use posix_lock_file(), which
does the right thing. Simplest is just to assume that any filesystem
that defines its own ->lock is not safe to request a blocking lock from.
So, this patch mostly reverts commit f657f8eef3ff ("nfs: don't atempt
blocking locks on nfs reexports") [sic] and commit b840be2f00c0 ("lockd:
don't attempt blocking locks on nfs reexports"), and instead uses a
check of ->lock (Vasily's suggestion) to decide whether to support
blocking lock notifications on a given filesystem. Also add a little
documentation.
Perhaps someday we could add back an export flag later to allow
filesystems with "good" ->lock methods to support blocking lock
notifications.
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: Description rewritten to address checkpatch nits ]
[ cel: Fixed warning when SUNRPC debugging is disabled ]
[ cel: Fixed NULL check ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
|
|
As in the v4 case, it doesn't work well to block waiting for a lock on
an nfs filesystem.
As in the v4 case, that means we're depending on the client to poll.
It's probably incorrect to depend on that, but I *think* clients do poll
in practice. In any case, it's an improvement over hanging the lockd
thread indefinitely as we currently are.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We shouldn't really be using a read-only file descriptor to take a write
lock.
Most filesystems will put up with it. But NFS, for example, won't.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Make this lookup slightly more concise, and prepare for changing how we
look this up in a following patch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Locks have two sets of op arrays, fl_lmops for the lock manager (lockd
or nfsd), fl_ops for the filesystem. The server-side lockd code has
been setting its own fl_ops, which leads to confusion (and crashes) in
the reexport case, where the filesystem expects to be the only one
setting fl_ops.
And there's no reason for it that I can see-the lm_get/put_owner ops do
the same job.
Reported-by: Daire Byrne <daire@dneg.com>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
After calling vfs_test_lock() the pointer to a conflicting lock can be
returned, and that lock is not guarunteed to be owned by nlm. In that
case, we cannot cast it to struct nlm_lockowner. Instead return the pid
of that conflicting lock.
Fixes: 646d73e91b42 ("lockd: Show pid of lockd for remote locks")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Fix sparse warnings:
fs/lockd/clntproc.c:57:6: warning: symbol 'nlmclnt_put_lockowner' was not declared. Should it be static?
fs/lockd/svclock.c:409:35: warning: symbol 'nlmsvc_lock_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Use the pid of lockd instead of the remote lock's svid for the fl_pid for
local POSIX locks. This allows proper enumeration of which local process
owns which lock. The svid is meaningless to local lock readers.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Now that the NLM server allocates an nlm_lockowner for fl_owner, there's
no need for special hashing or comparison.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Do as the NLM client: allocate and track a struct nlm_lockowner for use as
the fl_owner for locks created by the NLM sever. This allows us to keep
the svid within this structure for matching locks, and will allow us to
track the pid of lockd in a future patch. It should also allow easier
reference of the nlm_host in conflicting locks, and simplify lock hashing
and comparison.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
[bfields@redhat.com: fix type of some error returns]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
posix_unblock_lock() is not specific to posix locks, and behaves
nearly identically to locks_delete_block() - the former returning a
status while the later doesn't.
So discard posix_unblock_lock() and use locks_delete_block() instead,
after giving that function an appropriate return value.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
nfsd and lockd call vfs_lock_file() to lock/unlock the inode
returned by locks_inode(file).
Many places in nfsd/lockd code use the inode returned by
file_inode(file) for lock manipulation. With Overlayfs, file_inode()
(the underlying inode) is not the same object as locks_inode() (the
overlay inode). This can result in "Leaked POSIX lock" messages
and eventually to a kernel crash as reported by Eddie Horng:
https://marc.info/?l=linux-unionfs&m=153086643202072&w=2
Fix all the call sites in nfsd/lockd that should use locks_inode().
This is a correctness bug that manifested when overlayfs gained
NFS export support in v4.16.
Reported-by: Eddie Horng <eddiehorng.tw@gmail.com>
Tested-by: Eddie Horng <eddiehorng.tw@gmail.com>
Cc: Jeff Layton <jlayton@kernel.org>
Fixes: 8383f1748829 ("ovl: wire up NFS export operations")
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A null check followed by a return is being performed already, so block
is always non-null at the second check on block, hence we can remove
this redundant null-check (Detected by PVS-Studio). Also re-work
comment to clean up a check-patch warning.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The BKL is completely out of the picture in the lockd and sunrpc code
these days. Update the antiquated comments that refer to it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
LOCKD_DEBUG is always the same value as CONFIG_SUNRPC_DEBUG, so we can
just use it instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
As Kinglong points out, the nlm_block->b_fl field is no longer used at
all. Also, vfs_test_lock in the generic locking code will only return
FILE_LOCK_DEFERRED if FL_SLEEP is set, and it isn't here.
The only other place that returns that value is the DLM lock code, but
it only does that in dlm_posix_lock, never in dlm_posix_get.
Remove all of the deferred locking code from the testlock codepath
since it doesn't appear to ever be used anyway.
I do have a small concern that this might cause a behavior change in the
case where you have a block already sitting on the list when the
testlock request comes in, but that looks like it doesn't really work
properly anyway. I think it's best to just pass that down to
vfs_test_lock and let the filesystem report that instead of trying to
infer what's going on with the lock by looking at an existing block.
Cc: cluster-devel@redhat.com
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
|
|
Commit d5b9026a67 ([PATCH] knfsd: locks: flag NFSv4-owned locks) using
fl_lmops field in file_lock for checking nfsd4 lockowner.
But, commit 1a747ee0cc (locks: don't call ->copy_lock methods on return
of conflicting locks) causes the fl_lmops of conflock always be NULL.
Also, commit 0996905f93 (lockd: posix_test_lock() should not call
locks_copy_lock()) caused the fl_lmops of conflock always be NULL too.
Make sure copy the private information by fl_copy_lock() in struct
file_lock_operations, merge __locks_copy_lock() to fl_copy_lock().
Jeff advice, "Set fl_lmops on conflocks, but don't set fl_ops.
fl_ops are superfluous, since they are callbacks into the filesystem.
There should be no need to bother the filesystem at all with info
in a conflock. But, lock _ownership_ matters for conflocks and that's
indicated by the fl_lmops. So you really do want to copy the fl_lmops
for conflocks I think."
v5: add missing calling of locks_release_private() in nlmsvc_testlock()
v4: only copy fl_lmops for conflock, don't copy fl_ops
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
|
|
This argument is always NULL so don't pass it around.
[jlayton: remove dependencies on previous patches in series]
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
|
|
If an NFS client attempts to get a lock (using NLM) and the lock is
not available, the server will remember the request and when the lock
becomes available it will send a GRANT request to the client to
provide the lock.
If the client already held an adjacent lock, the GRANT callback will
report the union of the existing and new locks, which can confuse the
client.
This happens because __posix_lock_file (called by vfs_lock_file)
updates the passed-in file_lock structure when adjacent or
over-lapping locks are found.
To avoid this problem we take a copy of the two fields that can
be changed (fl_start and fl_end) before the call and restore them
afterwards.
An alternate would be to allocate a 'struct file_lock', initialise it,
use locks_copy_lock() to take a copy, then locks_release_private()
after the vfs_lock_file() call. But that is a lot more work.
Reported-by: Olaf Kirch <okir@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
--
v1 had a couple of issues (large on-stack struct and didn't really work properly).
This version is much better tested.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Pull nfsd bugfixes from Bruce Fields:
"Just three minor bugfixes"
* 'for-3.11' of git://linux-nfs.org/~bfields/linux:
svcrdma: underflow issue in decode_write_list()
nfsd4: fix minorversion support interface
lockd: protect nlm_blocked access in nlmsvc_retry_blocked
|
|
In nlmsvc_retry_blocked, the check that the list is non-empty and acquiring
the pointer of the first entry is unprotected by any lock. This allows a rare
race condition when there is only one entry on the list. A function such as
nlmsvc_grant_callback() can be called, which will temporarily remove the entry
from the list. Between the list_empty() and list_entry(),the list may become
empty, causing an invalid pointer to be used as an nlm_block, leading to a
possible crash.
This patch adds the nlm_block_lock around these calls to prevent concurrent
use of the nlm_blocked list.
This was a regression introduced by
f904be9cc77f361d37d71468b13ff3d1a1823dea "lockd: Mostly remove BKL from
the server".
Cc: Bryan Schumaker <bjschuma@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Currently, the hashing that the locking code uses to add these values
to the blocked_hash is simply calculated using fl_owner field. That's
valid in most cases except for server-side lockd, which validates the
owner of a lock based on fl_owner and fl_pid.
In the case where you have a small number of NFS clients doing a lot
of locking between different processes, you could end up with all
the blocked requests sitting in a very small number of hash buckets.
Add a new lm_owner_key operation to the lock_manager_operations that
will generate an unsigned long to use as the key in the hashtable.
That function is only implemented for server-side lockd, and simply
XORs the fl_owner and fl_pid.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
we need to grab mutex before the reference counter reaches 0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second vfs pile from Al Viro:
"The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
deadlock reproduced by xfstests 068), symlink and hardlink restriction
patches, plus assorted cleanups and fixes.
Note that another fsfreeze deadlock (emergency thaw one) is *not*
dealt with - the series by Fernando conflicts a lot with Jan's, breaks
userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
for massive vfsmount leak; this is going to be handled next cycle.
There probably will be another pull request, but that stuff won't be
in it."
Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
delousing target_core_file a bit
Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
fs: Remove old freezing mechanism
ext2: Implement freezing
btrfs: Convert to new freezing mechanism
nilfs2: Convert to new freezing mechanism
ntfs: Convert to new freezing mechanism
fuse: Convert to new freezing mechanism
gfs2: Convert to new freezing mechanism
ocfs2: Convert to new freezing mechanism
xfs: Convert to new freezing code
ext4: Convert to new freezing mechanism
fs: Protect write paths by sb_start_write - sb_end_write
fs: Skip atime update on frozen filesystem
fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
fs: Improve filesystem freezing handling
switch the protection of percpu_counter list to spinlock
nfsd: Push mnt_want_write() outside of i_mutex
btrfs: Push mnt_want_write() outside of i_mutex
fat: Push mnt_want_write() outside of i_mutex
...
|
|
It's used both for client and server hosts; we can't do nlmclnt_release_host()
on failure exits, since the host might need nlmsvc_release_host(), with BUG_ON()
for calling the wrong one. Makes life simpler for callers, actually...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Passed network namespace replaced hard-coded init_net
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Stephen Rothwell reports:
net/sunrpc/rpcb_clnt.c: In function 'rpcb_enc_mapping':
net/sunrpc/rpcb_clnt.c:820:19: warning: unused variable 'task' [-Wunused-variable]
net/sunrpc/rpcb_clnt.c: In function 'rpcb_dec_getport':
net/sunrpc/rpcb_clnt.c:837:19: warning: unused variable 'task' [-Wunused-variable]
net/sunrpc/rpcb_clnt.c: In function 'rpcb_dec_set':
net/sunrpc/rpcb_clnt.c:860:19: warning: unused variable 'task' [-Wunused-variable]
net/sunrpc/rpcb_clnt.c: In function 'rpcb_enc_getaddr':
net/sunrpc/rpcb_clnt.c:892:19: warning: unused variable 'task' [-Wunused-variable]
net/sunrpc/rpcb_clnt.c: In function 'rpcb_dec_getaddr':
net/sunrpc/rpcb_clnt.c:914:19: warning: unused variable 'task' [-Wunused-variable]
fs/lockd/svclock.c:49:20: warning: 'nlmdbg_cookie2a' declared 'static' but never defined [-Wunused-function]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Both the filesystem and the lock manager can associate operations with a
lock. Confusingly, one of them (fl_release_private) actually has the
same name in both operation structures.
It would save some confusion to give the lock-manager ops different
names.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The nlm_release_call() function is invoked from both the server and
the client side. We're about to introduce a distinct server- and
client-side nlm_release_host(), so nlm_release_call() must first be
split into a client-side and a server-side version.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Clean up. nlmdbg_cookie2a() is used only in svclock.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
nlmsvc_notify_blocked walks the nlm_blocked list,
which requires nlm_blocked_lock.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch removes all but one call to lock_kernel() from the server.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For every lock request lockd creates a new file_lock object
in nlmsvc_setgrantargs() by copying the passed in file_lock with
locks_copy_lock(). A filesystem can attach it's own lock_operations
vector to the file_lock. It has to be cleaned up at the end of the
file_lock's life. However, lockd doesn't do it today, yet it
asserts in nlmclnt_release_lockargs() that the per-filesystem
state is clean.
This patch fixes it by exporting locks_release_private() and adding
it to nlmsvc_freegrantargs(), to be symmetrical to creating a
file_lock in nlmsvc_setgrantargs().
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
No change in behavior, just rearranging the switch so that we break out
of the switch if and only if we're in the wait case.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
