| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Accrue the following benefits:
a) Deduplicate this common bit of code.
b) Don't prepare rq_vec for NFSv2 and NFSv3 spliced reads, which
don't use rq_vec. This is already the case for
nfsd4_encode_read().
c) Eventually, converting NFSD's read path to use a bvec iterator
will be simpler.
In the next patch, nfsd_iter_read() will replace nfsd_readv() for
all NFS versions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull nfsd updates from Chuck Lever:
"Two significant security enhancements are part of this release:
- NFSD's RPC header encoding and decoding, including RPCSEC GSS and
gssproxy header parsing, has been overhauled to make it more
memory-safe.
- Support for Kerberos AES-SHA2-based encryption types has been added
for both the NFS client and server. This provides a clean path for
deprecating and removing insecure encryption types based on DES and
SHA-1. AES-SHA2 is also FIPS-140 compliant, so that NFS with
Kerberos may now be used on systems with fips enabled.
In addition to these, NFSD is now able to handle crossing into an
auto-mounted mount point on an exported NFS mount. A number of fixes
have been made to NFSD's server-side copy implementation.
RPC metrics have been converted to per-CPU variables. This helps
reduce unnecessary cross-CPU and cross-node memory bus traffic, and
significantly reduces noise when KCSAN is enabled"
* tag 'nfsd-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (121 commits)
NFSD: Clean up nfsd_symlink()
NFSD: copy the whole verifier in nfsd_copy_write_verifier
nfsd: don't fsync nfsd_files on last close
SUNRPC: Fix occasional warning when destroying gss_krb5_enctypes
nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open
NFSD: fix problems with cleanup on errors in nfsd4_copy
nfsd: fix race to check ls_layouts
nfsd: don't hand out delegation on setuid files being opened for write
SUNRPC: Remove ->xpo_secure_port()
SUNRPC: Clean up the svc_xprt_flags() macro
nfsd: remove fs/nfsd/fault_inject.c
NFSD: fix leaked reference count of nfsd4_ssc_umount_item
nfsd: clean up potential nfsd_file refcount leaks in COPY codepath
nfsd: zero out pointers after putting nfsd_files on COPY setup error
SUNRPC: Fix whitespace damage in svcauth_unix.c
nfsd: eliminate __nfs4_get_fd
nfsd: add some kerneldoc comments for stateid preprocessing functions
nfsd: eliminate find_deleg_file_locked
nfsd: don't take nfsd4_copy ref for OP_OFFLOAD_STATUS
SUNRPC: Add encryption self-tests
...
|
|
- Improves counting accuracy
- Reduces cross-CPU memory traffic
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
NFSv4 operations manage the lifetime of nfsd_file items they use by
means of NFSv4 OPEN and CLOSE. Hence there's no need for them to be
garbage collected.
Introduce a mechanism to enable garbage collection for nfsd_file
items used only by NFSv2/3 callers.
Note that the change in nfsd_file_put() ensures that both CLOSE and
DELEGRETURN will actually close out and free an nfsd_file on last
reference of a non-garbage-collected file.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=394
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
In a moment I'm going to introduce separate nfsd_file types, one of
which is garbage-collected; the other, not. The garbage-collected
variety is to be used by NFSv2 and v3, and the non-garbage-collected
variety is to be used by NFSv4.
nfsd_commit() is invoked by both NFSv3 and NFSv4 consumers. We want
nfsd_commit() to find and use the correct variety of cached
nfsd_file object for the NFS version that is in use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
|
|
The dust has settled a bit and it's become obvious what code is
totally common between nfsd_init_dirlist_pages() and
nfsd3_init_dirlist_pages(). Move that common code to SUNRPC.
The new helper brackets the existing xdr_init_decode_pages() API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, SUNRPC clears the whole of .pc_argsize before processing
each incoming RPC transaction. Add an extra parameter to struct
svc_procedure to enable upper layers to reduce the amount of each
operation's argument structure that is zeroed by SUNRPC.
The size of struct nfsd4_compoundargs, in particular, is a lot to
clear on each incoming RPC Call. A subsequent patch will cut this
down to something closer to what NFSv2 and NFSv3 uses.
This patch should cause no behavior changes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply message at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Thanks to Aleksi Illikainen and Kari Hulkko for uncovering this
issue.
Reported-by: Ben Ronallo <Benjamin.Ronallo@synopsys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When creating or unlinking a name in a directory use explicit
inode_lock_nested() instead of fh_lock(), and explicit calls to
fh_fill_pre_attrs() and fh_fill_post_attrs(). This is already done
for renames, with lock_rename() as the explicit locking.
Also move the 'fill' calls closer to the operation that might change the
attributes. This way they are avoided on some error paths.
For the v2-only code in nfsproc.c, the fill calls are not replaced as
they aren't needed.
Making the locking explicit will simplify proposed future changes to
locking for directories. It also makes it easily visible exactly where
pre/post attributes are used - not all callers of fh_lock() actually
need the pre/post attributes.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Some error paths in nfsd_unlink() allow it to exit without unlocking the
directory. This is not a problem in practice as the directory will be
locked with an fh_put(), but it is untidy and potentially confusing.
This allows us to remove all the fh_unlock() calls that are immediately
after nfsd_unlink() calls.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd_create() usually returns with the directory still locked.
nfsd_symlink() usually returns with it unlocked. This is clumsy.
Until recently nfsd_create() needed to keep the directory locked until
ACLs and security label had been set. These are now set inside
nfsd_create() (in nfsd_setattr()) so this need is gone.
So change nfsd_create() and nfsd_symlink() to always unlock, and remove
any fh_unlock() calls that follow calls to these functions.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The NFS protocol includes attributes when creating symlinks.
Linux does store attributes for symlinks and allows them to be set,
though they are not used for permission checking.
NFSD currently doesn't set standard (struct iattr) attributes when
creating symlinks, but for NFSv4 it does set ACLs and security labels.
This is inconsistent.
To improve consistency, pass the provided attributes into nfsd_symlink()
and call nfsd_create_setattr() to set them.
NOTE: this results in a behaviour change for all NFS versions when the
client sends non-default attributes with a SYMLINK request. With the
Linux client, the only attributes are:
attr.ia_mode = S_IFLNK | S_IRWXUGO;
attr.ia_valid = ATTR_MODE;
so the final outcome will be unchanged. Other clients might sent
different attributes, and if they did they probably expect them to be
honoured.
We ignore any error from nfsd_create_setattr(). It isn't really clear
what should be done if a file is successfully created, but the
attributes cannot be set. NFS doesn't allow partial success to be
reported. Reporting failure is probably more misleading than reporting
success, so the status is ignored.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The attributes that nfsd might want to set on a file include 'struct
iattr' as well as an ACL and security label.
The latter two are passed around quite separately from the first, in
part because they are only needed for NFSv4. This leads to some
clumsiness in the code, such as the attributes NOT being set in
nfsd_create_setattr().
We need to keep the directory locked until all attributes are set to
ensure the file is never visibile without all its attributes. This need
combined with the inconsistent handling of attributes leads to more
clumsiness.
As a first step towards tidying this up, introduce 'struct nfsd_attrs'.
This is passed (by reference) to vfs.c functions that work with
attributes, and is assembled by the various nfs*proc functions which
call them. As yet only iattr is included, but future patches will
expand this.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The NFSv3 CREATE and NFSv4 OPEN(CREATE) use cases are about to
diverge such that it makes sense to split do_nfsd_create() into one
version for NFSv3 and one for NFSv4.
As a first step, copy do_nfsd_create() to nfs3proc.c and remove
NFSv4-specific logic.
One immediate legibility benefit is that the logic for handling
NFSv3 createhow is now quite straightforward. NFSv4 createhow
has some subtleties that IMO do not belong in generic code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As near as I can tell, mode bit masking and setting S_IFREG is
already done by do_nfsd_create() and vfs_create(). The NFSv4 path
(do_open_lookup), for example, does not bother with this special
processing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull more nfsd fixes from Chuck Lever:
"Ensure that NFS clients cannot send file size or offset values that
can cause the NFS server to crash or to return incorrect or surprising
results.
In particular, fix how the NFS server handles values larger than
OFFSET_MAX"
* tag 'nfsd-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Deprecate NFS_OFFSET_MAX
NFSD: Fix offset type in I/O trace points
NFSD: COMMIT operations must not return NFS?ERR_INVAL
NFSD: Clamp WRITE offsets
NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes
NFSD: Fix ia_size underflow
NFSD: Fix the behavior of READ near OFFSET_MAX
|
|
Since, well, forever, the Linux NFS server's nfsd_commit() function
has returned nfserr_inval when the passed-in byte range arguments
were non-sensical.
However, according to RFC 1813 section 3.3.21, NFSv3 COMMIT requests
are permitted to return only the following non-zero status codes:
NFS3ERR_IO
NFS3ERR_STALE
NFS3ERR_BADHANDLE
NFS3ERR_SERVERFAULT
NFS3ERR_INVAL is not included in that list. Likewise, NFS4ERR_INVAL
is not listed in the COMMIT row of Table 6 in RFC 8881.
RFC 7530 does permit COMMIT to return NFS4ERR_INVAL, but does not
specify when it can or should be used.
Instead of dropping or failing a COMMIT request in a byte range that
is not supported, turn it into a valid request by treating one or
both arguments as zero. Offset zero means start-of-file, count zero
means until-end-of-file, so we only ever extend the commit range.
NFS servers are always allowed to commit more and sooner than
requested.
The range check is no longer bounded by NFS_OFFSET_MAX, but rather
by the value that is returned in the maxfilesize field of the NFSv3
FSINFO procedure or the NFSv4 maxfilesize file attribute.
Note that this change results in a new pynfs failure:
CMT4 st_commit.testCommitOverflow : RUNNING
CMT4 st_commit.testCommitOverflow : FAILURE
COMMIT with offset + count overflow should return
NFS4ERR_INVAL, instead got NFS4_OK
IMO the test is not correct as written: RFC 8881 does not allow the
COMMIT operation to return NFS4ERR_INVAL.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
|
|
Ensure that a client cannot specify a WRITE range that falls in a
byte range outside what the kernel's internal types (such as loff_t,
which is signed) can represent. The kiocb iterators, invoked in
nfsd_vfs_write(), should properly limit write operations to within
the underlying file system's s_maxbytes.
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull nfsd updates from Chuck Lever:
"Bruce has announced he is leaving Red Hat at the end of the month and
is stepping back from his role as NFSD co-maintainer. As a result,
this includes a patch removing him from the MAINTAINERS file.
There is one patch in here that Jeff Layton was carrying in the locks
tree. Since he had only one for this cycle, he asked us to send it to
you via the nfsd tree.
There continues to be 0-day reports from Robert Morris @MIT. This time
we include a fix for a crash in the COPY_NOTIFY operation.
Highlights:
- Bruce steps down as NFSD maintainer
- Prepare for dynamic nfsd thread management
- More work on supporting re-exporting NFS mounts
- One fs/locks patch on behalf of Jeff Layton
Notable bug fixes:
- Fix zero-length NFSv3 WRITEs
- Fix directory cinfo on FS's that do not support iversion
- Fix WRITE verifiers for stable writes
- Fix crash on COPY_NOTIFY with a special state ID"
* tag 'nfsd-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (51 commits)
SUNRPC: Fix sockaddr handling in svcsock_accept_class trace points
SUNRPC: Fix sockaddr handling in the svc_xprt_create_error trace point
fs/locks: fix fcntl_getlk64/fcntl_setlk64 stub prototypes
nfsd: fix crash on COPY_NOTIFY with special stateid
MAINTAINERS: remove bfields
NFSD: Move fill_pre_wcc() and fill_post_wcc()
Revert "nfsd: skip some unnecessary stats in the v4 case"
NFSD: Trace boot verifier resets
NFSD: Rename boot verifier functions
NFSD: Clean up the nfsd_net::nfssvc_boot field
NFSD: Write verifier might go backwards
nfsd: Add a tracepoint for errors in nfsd4_clone_file_range()
NFSD: De-duplicate net_generic(nf->nf_net, nfsd_net_id)
NFSD: De-duplicate net_generic(SVC_NET(rqstp), nfsd_net_id)
NFSD: Clean up nfsd_vfs_write()
nfsd: Replace use of rwsem with errseq_t
NFSD: Fix verifier returned in stable WRITEs
nfsd: Retry once in nfsd_open on an -EOPENSTALE return
nfsd: Add errno mapping for EREMOTEIO
nfsd: map EBADF
...
|
|
The Linux NFS server currently responds to a zero-length NFSv3 WRITE
request with NFS3ERR_IO. It responds to a zero-length NFSv4 WRITE
with NFS4_OK and count of zero.
RFC 1813 says of the WRITE procedure's @count argument:
count
The number of bytes of data to be written. If count is
0, the WRITE will succeed and return a count of 0,
barring errors due to permissions checking.
RFC 8881 has similar language for NFSv4, though NFSv4 removed the
explicit @count argument because that value is already contained in
the opaque payload array.
The synthetic client pynfs's WRT4 and WRT15 tests do emit zero-
length WRITEs to exercise this spec requirement. Commit fdec6114ee1f
("nfsd4: zero-length WRITE should succeed") addressed the same
problem there with the same fix.
But interestingly the Linux NFS client does not appear to emit zero-
length WRITEs, instead squelching them. I'm not aware of a test that
can generate such WRITEs for NFSv3, so I wrote a naive C program to
generate a zero-length WRITE and test this fix.
Fixes: 8154ef2776aa ("NFSD: Clean up legacy NFS WRITE argument XDR decoders")
Reported-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If a client sends a READDIR count argument that is too small (say,
zero), then the buffer size calculation in the new init_dirlist
helper functions results in an underflow, allowing the XDR stream
functions to write beyond the actual buffer.
This calculation has always been suspect. NFSD has never sanity-
checked the READDIR count argument, but the old entry encoders
managed the problem correctly.
With the commits below, entry encoding changed, exposing the
underflow to the pointer arithmetic in xdr_reserve_space().
Modern NFS clients attempt to retrieve as much data as possible
for each READDIR request. Also, we have no unit tests that
exercise the behavior of READDIR at the lower bound of @count
values. Thus this case was missed during testing.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: f5dcccd647da ("NFSD: Update the NFSv2 READDIR entry encoder to use struct xdr_stream")
Fixes: 7f87fc2d34d4 ("NFSD: Update NFSv3 READDIR entry encoders to use struct xdr_stream")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor.
Now that the NFSv2 and NFSv3 XDR decoders have been converted to
use xdr_streams, the WRITE decoder functions can use
xdr_stream_subsegment() to extract the WRITE payload into its own
xdr_buf, just as the NFSv4 WRITE XDR decoder currently does.
That makes it possible to pass the first kvec, pages array + length,
page_base, and total payload length via a single function parameter.
The payload's page_base is not yet assigned or used, but will be in
subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
During NFSv2 and NFSv3 READDIR/PLUS operations, NFSD advances
rq_next_page to the full size of the client-requested buffer, then
releases all those pages at the end of the request. The next request
to use that nfsd thread has to refill the pages.
NFSD does this even when the dirlist in the reply is small. With
NFSv3 clients that send READDIR operations with large buffer sizes,
that can be 256 put_page/alloc_page pairs per READDIR request, even
though those pages often remain unused.
We can save some work by not releasing dirlist buffer pages that
were not used to form the READDIR Reply. I've left the NFSv2 code
alone since there are never more than three pages involved in an
NFSv2 READDIR Reply.
Eventually we should nail down why these pages need to be released
at all in order to avoid allocating and releasing pages
unnecessarily.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The benefit of the xdr_stream helpers is that they transparently
handle encoding an XDR data item that crosses page boundaries.
Most of the open-coded logic to do that here can be eliminated.
A sub-buffer and sub-stream are set up as a sink buffer for the
directory entry encoder. As an entry is encoded, it is added to
the end of the content in this buffer/stream. The total length of
the directory list is tracked in the buffer's @len field.
When it comes time to encode the Reply, the sub-buffer is merged
into rq_res's page array at the correct place using
xdr_write_pages().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Counting the bytes used by each returned directory entry
seems less brittle to me than trying to measure consumed pages after
the fact.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor: De-duplicate identical code that handles encoding of
directory offset cookies across page boundaries.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Also, clean up: Rename the encoder function to match the name of
the result structure in RFC 1813, consistent with other encoder
function names in nfs3xdr.c. "diropres" is an NFSv2 thingie.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As an additional clean up, some renaming is done to more closely
reflect the data type and variable names used in the NFSv3 XDR
definition provided in RFC 1813. "attrstat" is an NFSv2 thingie.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
De-duplicate some code that is used by both READDIR and READDIRPLUS
to build the dirlist in the Reply. Because this code is not related
to decoding READ arguments, it is moved to a more appropriate spot.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Code inspection shows that the server's NFSv3 READDIR implementation
handles offset cookies slightly differently than the NFSv2 READDIR,
NFSv3 READDIRPLUS, and NFSv4 READDIR implementations,
and there doesn't seem to be any need for this difference.
As a clean up, I copied the logic from nfsd3_proc_readdirplus().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The NFSv3 READLINK request takes a single filehandle, so it can
re-use GETATTR's decoder.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The code that sets up rq_vec is refactored so that it is now
adjacent to the nfsd_read() call site where it is used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The next few patches will employ these strings to help make server-
side trace logs more human-readable. A similar technique is already
in use in kernel RPC client code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Start off the conversion to xdr_stream by de-duplicating the functions
that decode void arguments and encode void results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The macro is unused, remove it to tame gcc warning:
fs/nfsd/nfs3proc.c:702:0: warning: macro "nfsd3_fhandleres" is not used
[-Wunused-macros]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: linux-nfs@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A late paragraph of RFC 1813 Section 3.3.11 states:
| ... if the server does not support the target type or the
| target type is illegal, the error, NFS3ERR_BADTYPE, should
| be returned. Note that NF3REG, NF3DIR, and NF3LNK are
| illegal types for MKNOD.
The Linux NFS server incorrectly returns NFSERR_INVAL in these
cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The original intent was presumably to reduce code duplication. The
trade-off was:
- No support for an NFSD proc function returning a non-success
RPC accept_stat value.
- No support for void NFS replies to non-NULL procedures.
- Everyone pays for the deduplication with a few extra conditional
branches in a hot path.
In addition, nfsd_dispatch() leaves *statp uninitialized in the
success path, unlike svc_generic_dispatch().
Address all of these problems by moving the logic for encoding
the NFS status code into the NFS XDR encoders themselves. Then
update the NFS .pc_func methods to return an RPC accept_stat
value.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Refactor: I'm about to change the return value from .pc_func. Clear
the way by replacing the RETURN_STATUS() macro with logic that
plants the status code directly into the response structure.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
nfsd_dispatch() is a hot path. Let's optimize the XDR method calls
for the by-far common case, which is that the XDR methods are indeed
present.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When doing an unstable write, we need to ensure that we sample the
write verifier before releasing the lock, and allowing a commit to
the same file to proceed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When we have a successful commit, ensure we sample the commit verifier
before releasing the lock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Currently, the knfsd server assumes that a short read indicates an
end of file. That assumption is incorrect. The short read means that
either we've hit the end of file, or we've hit a read error.
In the case of a read error, the client may want to retry (as per the
implementation recommendations in RFC1813 and RFC7530), but currently it
is being told that it hit an eof.
Move the code to detect eof from version specific code into the generic
nfsd read.
Report eof only in the two following cases:
1) read() returns a zero length short read with no error.
2) the offset+length of the read is >= the file size.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
After this commit
f875a79 nfsd: allow nfsv3 readdir request to be larger.
nfsv3 readdir request size can be larger than PAGE_SIZE. So if the
directory been read is large enough, we can use multiple pages
in rq_respages. Update buffer count and page pointers like we do
in readdirplus to make this happen.
Now listing a directory within 3000 files will panic because we
are counting in a wrong way and would write on random page.
Fixes: f875a79 "nfsd: allow nfsv3 readdir request to be larger"
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
