summaryrefslogtreecommitdiff
path: root/fs/nilfs2
AgeCommit message (Collapse)AuthorFilesLines
2023-02-22nilfs2: fix underflow in second superblock position calculationsRyusuke Konishi3-1/+23
commit 99b9402a36f0799f25feee4465bfa4b8dfa74b4d upstream. Macro NILFS_SB2_OFFSET_BYTES, which computes the position of the second superblock, underflows when the argument device size is less than 4096 bytes. Therefore, when using this macro, it is necessary to check in advance that the device size is not less than a lower limit, or at least that underflow does not occur. The current nilfs2 implementation lacks this check, causing out-of-bound block access when mounting devices smaller than 4096 bytes: I/O error, dev loop0, sector 36028797018963960 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 NILFS (loop0): unable to read secondary superblock (blocksize = 1024) In addition, when trying to resize the filesystem to a size below 4096 bytes, this underflow occurs in nilfs_resize_fs(), passing a huge number of segments to nilfs_sufile_resize(), corrupting parameters such as the number of segments in superblocks. This causes excessive loop iterations in nilfs_sufile_resize() during a subsequent resize ioctl, causing semaphore ns_segctor_sem to block for a long time and hang the writer thread: INFO: task segctord:5067 blocked for more than 143 seconds. Not tainted 6.2.0-rc8-syzkaller-00015-gf6feea56f66d #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:segctord state:D stack:23456 pid:5067 ppid:2 flags:0x00004000 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x1409/0x43f0 kernel/sched/core.c:6606 schedule+0xc3/0x190 kernel/sched/core.c:6682 rwsem_down_write_slowpath+0xfcf/0x14a0 kernel/locking/rwsem.c:1190 nilfs_transaction_lock+0x25c/0x4f0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2486 [inline] nilfs_segctor_thread+0x52f/0x1140 fs/nilfs2/segment.c:2570 kthread+0x270/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> ... Call Trace: <TASK> folio_mark_accessed+0x51c/0xf00 mm/swap.c:515 __nilfs_get_page_block fs/nilfs2/page.c:42 [inline] nilfs_grab_buffer+0x3d3/0x540 fs/nilfs2/page.c:61 nilfs_mdt_submit_block+0xd7/0x8f0 fs/nilfs2/mdt.c:121 nilfs_mdt_read_block+0xeb/0x430 fs/nilfs2/mdt.c:176 nilfs_mdt_get_block+0x12d/0xbb0 fs/nilfs2/mdt.c:251 nilfs_sufile_get_segment_usage_block fs/nilfs2/sufile.c:92 [inline] nilfs_sufile_truncate_range fs/nilfs2/sufile.c:679 [inline] nilfs_sufile_resize+0x7a3/0x12b0 fs/nilfs2/sufile.c:777 nilfs_resize_fs+0x20c/0xed0 fs/nilfs2/super.c:422 nilfs_ioctl_resize fs/nilfs2/ioctl.c:1033 [inline] nilfs_ioctl+0x137c/0x2440 fs/nilfs2/ioctl.c:1301 ... This fixes these issues by inserting appropriate minimum device size checks or anti-underflow checks, depending on where the macro is used. Link: https://lkml.kernel.org/r/0000000000004e1dfa05f4a48e6b@google.com Link: https://lkml.kernel.org/r/20230214224043.24141-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: <syzbot+f0c4082ce5ebebdac63b@syzkaller.appspotmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24nilfs2: fix general protection fault in nilfs_btree_insert()Ryusuke Konishi1-3/+12
commit 7633355e5c7f29c049a9048e461427d1d8ed3051 upstream. If nilfs2 reads a corrupted disk image and tries to reads a b-tree node block by calling __nilfs_btree_get_block() against an invalid virtual block address, it returns -ENOENT because conversion of the virtual block address to a disk block address fails. However, this return value is the same as the internal code that b-tree lookup routines return to indicate that the block being searched does not exist, so functions that operate on that b-tree may misbehave. When nilfs_btree_insert() receives this spurious 'not found' code from nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was successful and continues the insert operation using incomplete lookup path data, causing the following crash: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] ... RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline] RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline] RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238 Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c 28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02 ... Call Trace: <TASK> nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline] nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147 nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101 __block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991 __block_write_begin fs/buffer.c:2041 [inline] block_write_begin+0x93/0x1e0 fs/buffer.c:2102 nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 __generic_file_write_iter+0x176/0x400 mm/filemap.c:3900 generic_file_write_iter+0xab/0x310 mm/filemap.c:3932 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> This patch fixes the root cause of this problem by replacing the error code that __nilfs_btree_get_block() returns on block address conversion failure from -ENOENT to another internal code -EINVAL which means that the b-tree metadata is corrupted. By returning -EINVAL, it propagates without glitches, and for all relevant b-tree operations, functions in the upper bmap layer output an error message indicating corrupted b-tree metadata via nilfs_bmap_convert_error(), and code -EIO will be eventually returned as it should be. Link: https://lkml.kernel.org/r/000000000000bd89e205f0e38355@google.com Link: https://lkml.kernel.org/r/20230105055356.8811-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+ede796cecd5296353515@syzkaller.appspotmail.com Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-14nilfs2: fix shift-out-of-bounds due to too large exponent of block sizeRyusuke Konishi1-4/+38
[ Upstream commit ebeccaaef67a4895d2496ab8d9c2fb8d89201211 ] If field s_log_block_size of superblock data is corrupted and too large, init_nilfs() and load_nilfs() still can trigger a shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn is set): shift exponent 38973 is too large for 32-bit type 'int' Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ubsan_epilogue+0xb/0x50 __ubsan_handle_shift_out_of_bounds.cold.12+0x17b/0x1f5 init_nilfs.cold.11+0x18/0x1d [nilfs2] nilfs_mount+0x9b5/0x12b0 [nilfs2] ... This fixes the issue by adding and using a new helper function for getting block size with sanity check. Link: https://lkml.kernel.org/r/20221027044306.42774-3-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()Ryusuke Konishi1-4/+27
[ Upstream commit 610a2a3d7d8be3537458a378ec69396a76c385b6 ] Patch series "nilfs2: fix UBSAN shift-out-of-bounds warnings on mount time". The first patch fixes a bug reported by syzbot, and the second one fixes the remaining bug of the same kind. Although they are triggered by the same super block data anomaly, I divided it into the above two because the details of the issues and how to fix it are different. Both are required to eliminate the shift-out-of-bounds issues at mount time. This patch (of 2): If the block size exponent information written in an on-disk superblock is corrupted, nilfs_sb2_bad_offset helper function can trigger shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn is set): shift exponent 38983 is too large for 64-bit type 'unsigned long long' Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x33d/0x3b0 lib/ubsan.c:322 nilfs_sb2_bad_offset fs/nilfs2/the_nilfs.c:449 [inline] nilfs_load_super_block+0xdf5/0xe00 fs/nilfs2/the_nilfs.c:523 init_nilfs+0xb7/0x7d0 fs/nilfs2/the_nilfs.c:577 nilfs_fill_super+0xb1/0x5d0 fs/nilfs2/super.c:1047 nilfs_mount+0x613/0x9b0 fs/nilfs2/super.c:1317 ... In addition, since nilfs_sb2_bad_offset() performs multiplication without considering the upper bound, the computation may overflow if the disk layout parameters are not normal. This fixes these issues by inserting preliminary sanity checks for those parameters and by converting the comparison from one involving multiplication and left bit-shifting to one using division and right bit-shifting. Link: https://lkml.kernel.org/r/20221027044306.42774-1-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/20221027044306.42774-2-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+e91619dd4c11c4960706@syzkaller.appspotmail.com Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()ZhangPeng1-0/+7
commit f0a0ccda18d6fd826d7c7e7ad48a6ed61c20f8b4 upstream. Syzbot reported a null-ptr-deref bug: NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 3603 Comm: segctord Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0 fs/nilfs2/alloc.c:608 Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7 RSP: 0018:ffffc90003dff830 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010 RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158 R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0 Call Trace: <TASK> nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline] nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193 nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236 nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940 nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline] nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline] nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088 nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337 nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568 nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018 nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline] nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045 nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline] nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> ... If DAT metadata file is corrupted on disk, there is a case where req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during a b-tree operation that cascadingly updates ancestor nodes of the b-tree, because nilfs_dat_commit_alloc() for a lower level block can initialize the blocknr on the same DAT entry between nilfs_dat_prepare_end() and nilfs_dat_commit_end(). If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free() without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and causes the NULL pointer dereference above in nilfs_palloc_commit_free_entry() function, which leads to a crash. Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free(). This also calls nilfs_error() in that case to notify that there is a fatal flaw in the filesystem metadata and prevent further operations. Link: https://lkml.kernel.org/r/00000000000097c20205ebaea3d6@google.com Link: https://lkml.kernel.org/r/20221114040441.1649940-1-zhangpeng362@huawei.com Link: https://lkml.kernel.org/r/20221119120542.17204-1-konishi.ryusuke@gmail.com Signed-off-by: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+ebe05ee8e98f755f61d0@syzkaller.appspotmail.com Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-02nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirtyChen Zhongjin1-0/+8
commit 512c5ca01a3610ab14ff6309db363de51f1c13a6 upstream. When extending segments, nilfs_sufile_alloc() is called to get an unassigned segment, then mark it as dirty to avoid accidentally allocating the same segment in the future. But for some special cases such as a corrupted image it can be unreliable. If such corruption of the dirty state of the segment occurs, nilfs2 may reallocate a segment that is in use and pick the same segment for writing twice at the same time. This will cause the problem reported by syzkaller: https://syzkaller.appspot.com/bug?id=c7c4748e11ffcc367cef04f76e02e931833cbd24 This case started with segbuf1.segnum = 3, nextnum = 4 when constructed. It supposed segment 4 has already been allocated and marked as dirty. However the dirty state was corrupted and segment 4 usage was not dirty. For the first time nilfs_segctor_extend_segments() segment 4 was allocated again, which made segbuf2 and next segbuf3 had same segment 4. sb_getblk() will get same bh for segbuf2 and segbuf3, and this bh is added to both buffer lists of two segbuf. It makes the lists broken which causes NULL pointer dereference. Fix the problem by setting usage as dirty every time in nilfs_sufile_mark_dirty(), which is called during constructing current segment to be written out and before allocating next segment. [chenzhongjin@huawei.com: add lock protection per Ryusuke] Link: https://lkml.kernel.org/r/20221121091141.214703-1-chenzhongjin@huawei.com Link: https://lkml.kernel.org/r/20221118063304.140187-1-chenzhongjin@huawei.com Fixes: 9ff05123e3bf ("nilfs2: segment constructor") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reported-by: <syzbot+77e4f0...@syzkaller.appspotmail.com> Reported-by: Liu Shixin <liushixin2@huawei.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-16nilfs2: fix use-after-free bug of ns_writer on remountRyusuke Konishi2-9/+8
commit 8cccf05fe857a18ee26e20d11a8455a73ffd4efd upstream. If a nilfs2 filesystem is downgraded to read-only due to metadata corruption on disk and is remounted read/write, or if emergency read-only remount is performed, detaching a log writer and synchronizing the filesystem can be done at the same time. In these cases, use-after-free of the log writer (hereinafter nilfs->ns_writer) can happen as shown in the scenario below: Task1 Task2 -------------------------------- ------------------------------ nilfs_construct_segment nilfs_segctor_sync init_wait init_waitqueue_entry add_wait_queue schedule nilfs_remount (R/W remount case) nilfs_attach_log_writer nilfs_detach_log_writer nilfs_segctor_destroy kfree finish_wait _raw_spin_lock_irqsave __raw_spin_lock_irqsave do_raw_spin_lock debug_spin_lock_before <-- use-after-free While Task1 is sleeping, nilfs->ns_writer is freed by Task2. After Task1 waked up, Task1 accesses nilfs->ns_writer which is already freed. This scenario diagram is based on the Shigeru Yoshida's post [1]. This patch fixes the issue by not detaching nilfs->ns_writer on remount so that this UAF race doesn't happen. Along with this change, this patch also inserts a few necessary read-only checks with superblock instance where only the ns_writer pointer was used to check if the filesystem is read-only. Link: https://syzkaller.appspot.com/bug?id=79a4c002e960419ca173d55e863bd09e8112df8b Link: https://lkml.kernel.org/r/20221103141759.1836312-1-syoshida@redhat.com [1] Link: https://lkml.kernel.org/r/20221104142959.28296-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+f816fa82f8783f7a02bb@syzkaller.appspotmail.com Reported-by: Shigeru Yoshida <syoshida@redhat.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-16nilfs2: fix deadlock in nilfs_count_free_blocks()Ryusuke Konishi1-2/+0
commit 8ac932a4921a96ca52f61935dbba64ea87bbd5dc upstream. A semaphore deadlock can occur if nilfs_get_block() detects metadata corruption while locating data blocks and a superblock writeback occurs at the same time: task 1 task 2 ------ ------ * A file operation * nilfs_truncate() nilfs_get_block() down_read(rwsem A) <-- nilfs_bmap_lookup_contig() ... generic_shutdown_super() nilfs_put_super() * Prepare to write superblock * down_write(rwsem B) <-- nilfs_cleanup_super() * Detect b-tree corruption * nilfs_set_log_cursor() nilfs_bmap_convert_error() nilfs_count_free_blocks() __nilfs_error() down_read(rwsem A) <-- nilfs_set_error() down_write(rwsem B) <-- *** DEADLOCK *** Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem) and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata corruption, __nilfs_error() is called from nilfs_bmap_convert_error() inside the lock section. Since __nilfs_error() calls nilfs_set_error() unless the filesystem is read-only and nilfs_set_error() attempts to writelock rwsem B (= nilfs->ns_sem) to write back superblock exclusively, hierarchical lock acquisition occurs in the order rwsem A -> rwsem B. Now, if another task starts updating the superblock, it may writelock rwsem B during the lock sequence above, and can deadlock trying to readlock rwsem A in nilfs_count_free_blocks(). However, there is actually no need to take rwsem A in nilfs_count_free_blocks() because it, within the lock section, only reads a single integer data on a shared struct with nilfs_sufile_get_ncleansegs(). This has been the case after commit aa474a220180 ("nilfs2: add local variable to cache the number of clean segments"), that is, even before this bug was introduced. So, this resolves the deadlock problem by just not taking the semaphore in nilfs_count_free_blocks(). Link: https://lkml.kernel.org/r/20221029044912.9139-1-konishi.ryusuke@gmail.com Fixes: e828949e5b42 ("nilfs2: call nilfs_error inside bmap routines") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+45d6ce7b7ad7ef455d03@syzkaller.appspotmail.com Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> [2.6.38+ Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-15nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failureRyusuke Konishi1-4/+10
commit 723ac751208f6d6540191689cfbf6c77135a7a1b upstream. If creation or finalization of a checkpoint fails due to anomalies in the checkpoint metadata on disk, a kernel warning is generated. This patch replaces the WARN_ONs by nilfs_error, so that a kernel, booted with panic_on_warn, does not panic. A nilfs_error is appropriate here to handle the abnormal filesystem condition. This also replaces the detected error codes with an I/O error so that neither of the internal error codes is returned to callers. Link: https://lkml.kernel.org/r/20220929123330.19658-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+fbb3e0b24e8dae5a16ee@syzkaller.appspotmail.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-15nilfs2: fix leak of nilfs_root in case of writer thread creation failureRyusuke Konishi1-4/+3
commit d0d51a97063db4704a5ef6bc978dddab1636a306 upstream. If nilfs_attach_log_writer() failed to create a log writer thread, it frees a data structure of the log writer without any cleanup. After commit e912a5b66837 ("nilfs2: use root object to get ifile"), this causes a leak of struct nilfs_root, which started to leak an ifile metadata inode and a kobject on that struct. In addition, if the kernel is booted with panic_on_warn, the above ifile metadata inode leak will cause the following panic when the nilfs2 kernel module is removed: kmem_cache_destroy nilfs2_inode_cache: Slab cache still has objects when called from nilfs_destroy_cachep+0x16/0x3a [nilfs2] WARNING: CPU: 8 PID: 1464 at mm/slab_common.c:494 kmem_cache_destroy+0x138/0x140 ... RIP: 0010:kmem_cache_destroy+0x138/0x140 Code: 00 20 00 00 e8 a9 55 d8 ff e9 76 ff ff ff 48 8b 53 60 48 c7 c6 20 70 65 86 48 c7 c7 d8 69 9c 86 48 8b 4c 24 28 e8 ef 71 c7 00 <0f> 0b e9 53 ff ff ff c3 48 81 ff ff 0f 00 00 77 03 31 c0 c3 53 48 ... Call Trace: <TASK> ? nilfs_palloc_freev.cold.24+0x58/0x58 [nilfs2] nilfs_destroy_cachep+0x16/0x3a [nilfs2] exit_nilfs_fs+0xa/0x1b [nilfs2] __x64_sys_delete_module+0x1d9/0x3a0 ? __sanitizer_cov_trace_pc+0x1a/0x50 ? syscall_trace_enter.isra.19+0x119/0x190 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> Kernel panic - not syncing: panic_on_warn set ... This patch fixes these issues by calling nilfs_detach_log_writer() cleanup function if spawning the log writer thread fails. Link: https://lkml.kernel.org/r/20221007085226.57667-1-konishi.ryusuke@gmail.com Fixes: e912a5b66837 ("nilfs2: use root object to get ifile") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+7381dc4ad60658ca4c05@syzkaller.appspotmail.com Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-15nilfs2: fix use-after-free bug of struct nilfs_rootRyusuke Konishi1-1/+16
commit d325dc6eb763c10f591c239550b8c7e5466a5d09 upstream. If the beginning of the inode bitmap area is corrupted on disk, an inode with the same inode number as the root inode can be allocated and fail soon after. In this case, the subsequent call to nilfs_clear_inode() on that bogus root inode will wrongly decrement the reference counter of struct nilfs_root, and this will erroneously free struct nilfs_root, causing kernel oopses. This fixes the problem by changing nilfs_new_inode() to skip reserved inode numbers while repairing the inode bitmap. Link: https://lkml.kernel.org/r/20221003150519.39789-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+b8c672b0e22615c80fe0@syzkaller.appspotmail.com Reported-by: Khalid Masum <khalid.masum.92@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-15nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()Ryusuke Konishi1-0/+2
commit 21a87d88c2253350e115029f14fe2a10a7e6c856 upstream. If the i_mode field in inode of metadata files is corrupted on disk, it can cause the initialization of bmap structure, which should have been called from nilfs_read_inode_common(), not to be called. This causes a lockdep warning followed by a NULL pointer dereference at nilfs_bmap_lookup_at_level(). This patch fixes these issues by adding a missing sanitiy check for the i_mode field of metadata file's inode. Link: https://lkml.kernel.org/r/20221002030804.29978-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+2b32eb36c1a825b7a74c@syzkaller.appspotmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21nilfs2: fix incorrect masking of permission flags for symlinksRyusuke Konishi1-0/+3
commit 5924e6ec1585445f251ea92713eb15beb732622a upstream. The permission flags of newly created symlinks are wrongly dropped on nilfs2 with the current umask value even though symlinks should have 777 (rwxrwxrwx) permissions: $ umask 0022 $ touch file && ln -s file symlink; ls -l file symlink -rw-r--r--. 1 root root 0 Jun 23 16:29 file lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file This fixes the bug by inserting a missing check that excludes symlinks. Link: https://lkml.kernel.org/r/1655974441-5612-1-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: Tommy Pettersson <ptp@lysator.liu.se> Reported-by: Ciprian Craciun <ciprian.craciun@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25nilfs2: fix lockdep warnings during disk space reclamationRyusuke Konishi5-21/+92
[ Upstream commit 6e211930f79aa45d422009a5f2e5467d2369ffe5 ] During disk space reclamation, nilfs2 still emits the following lockdep warning due to page/folio operations on shadowed page caches that nilfs2 uses to get a snapshot of DAT file in memory: WARNING: CPU: 0 PID: 2643 at include/linux/backing-dev.h:272 __folio_mark_dirty+0x645/0x670 ... RIP: 0010:__folio_mark_dirty+0x645/0x670 ... Call Trace: filemap_dirty_folio+0x74/0xd0 __set_page_dirty_nobuffers+0x85/0xb0 nilfs_copy_dirty_pages+0x288/0x510 [nilfs2] nilfs_mdt_save_to_shadow_map+0x50/0xe0 [nilfs2] nilfs_clean_segments+0xee/0x5d0 [nilfs2] nilfs_ioctl_clean_segments.isra.19+0xb08/0xf40 [nilfs2] nilfs_ioctl+0xc52/0xfb0 [nilfs2] __x64_sys_ioctl+0x11d/0x170 This fixes the remaining warning by using inode objects to hold those page caches. Link: https://lkml.kernel.org/r/1647867427-30498-3-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hao Sun <sunhao.th@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25nilfs2: fix lockdep warnings in page operations for btree nodesRyusuke Konishi10-50/+154
[ Upstream commit e897be17a441fa637cd166fc3de1445131e57692 ] Patch series "nilfs2 lockdep warning fixes". The first two are to resolve the lockdep warning issue, and the last one is the accompanying cleanup and low priority. Based on your comment, this series solves the issue by separating inode object as needed. Since I was worried about the impact of the object composition changes, I tested the series carefully not to cause regressions especially for delicate functions such like disk space reclamation and snapshots. This patch (of 3): If CONFIG_LOCKDEP is enabled, nilfs2 hits lockdep warnings at inode_to_wb() during page/folio operations for btree nodes: WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 inode_to_wb include/linux/backing-dev.h:269 [inline] WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 folio_account_dirtied mm/page-writeback.c:2460 [inline] WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 __folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509 Modules linked in: ... RIP: 0010:inode_to_wb include/linux/backing-dev.h:269 [inline] RIP: 0010:folio_account_dirtied mm/page-writeback.c:2460 [inline] RIP: 0010:__folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509 ... Call Trace: __set_page_dirty include/linux/pagemap.h:834 [inline] mark_buffer_dirty+0x4e6/0x650 fs/buffer.c:1145 nilfs_btree_propagate_p fs/nilfs2/btree.c:1889 [inline] nilfs_btree_propagate+0x4ae/0xea0 fs/nilfs2/btree.c:2085 nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337 nilfs_collect_dat_data+0x45/0xd0 fs/nilfs2/segment.c:625 nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1009 nilfs_segctor_scan_file+0x47a/0x700 fs/nilfs2/segment.c:1048 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1224 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1494 [inline] nilfs_segctor_do_construct+0x14f3/0x6c60 fs/nilfs2/segment.c:2036 nilfs_segctor_construct+0x7a7/0xb30 fs/nilfs2/segment.c:2372 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2480 [inline] nilfs_segctor_thread+0x3c3/0xf90 fs/nilfs2/segment.c:2563 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 This is because nilfs2 uses two page caches for each inode and inode->i_mapping never points to one of them, the btree node cache. This causes inode_to_wb(inode) to refer to a different page cache than the caller page/folio operations such like __folio_start_writeback(), __folio_end_writeback(), or __folio_mark_dirty() acquired the lock. This patch resolves the issue by allocating and using an additional inode to hold the page cache of btree nodes. The inode is attached one-to-one to the traditional nilfs2 inode if it requires a block mapping with b-tree. This setup change is in memory only and does not affect the disk format. Link: https://lkml.kernel.org/r/1647867427-30498-1-git-send-email-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/1647867427-30498-2-git-send-email-konishi.ryusuke@gmail.com Link: https://lore.kernel.org/r/YXrYvIo8YRnAOJCj@casper.infradead.org Link: https://lore.kernel.org/r/9a20b33d-b38f-b4a2-4742-c1eb5b8e4d6c@redhat.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+0d5b462a6f07447991b3@syzkaller.appspotmail.com Reported-by: syzbot+34ef28bb2aeb28724aa0@syzkaller.appspotmail.com Reported-by: Hao Sun <sunhao.th@gmail.com> Reported-by: David Hildenbrand <david@redhat.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_groupNanyong Sun1-1/+1
[ Upstream commit 17243e1c3072b8417a5ebfc53065d0a87af7ca77 ] kobject_put() should be used to cleanup the memory associated with the kobject instead of kobject_del(). See the section "Kobject removal" of "Documentation/core-api/kobject.rst". Link: https://lkml.kernel.org/r/20210629022556.3985106-7-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-7-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_groupNanyong Sun1-2/+2
[ Upstream commit b2fe39c248f3fa4bbb2a20759b4fdd83504190f7 ] If kobject_init_and_add returns with error, kobject_put() is needed here to avoid memory leak, because kobject_init_and_add may return error without freeing the memory associated with the kobject it allocated. Link: https://lkml.kernel.org/r/20210629022556.3985106-6-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-6-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_groupNanyong Sun1-1/+1
[ Upstream commit a3e181259ddd61fd378390977a1e4e2316853afa ] The kobject_put() should be used to cleanup the memory associated with the kobject instead of kobject_del. See the section "Kobject removal" of "Documentation/core-api/kobject.rst". Link: https://lkml.kernel.org/r/20210629022556.3985106-5-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-5-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix memory leak in nilfs_sysfs_create_##name##_groupNanyong Sun1-2/+2
[ Upstream commit 24f8cb1ed057c840728167dab33b32e44147c86f ] If kobject_init_and_add return with error, kobject_put() is needed here to avoid memory leak, because kobject_init_and_add may return error without freeing the memory associated with the kobject it allocated. Link: https://lkml.kernel.org/r/20210629022556.3985106-4-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-4-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix NULL pointer in nilfs_##name##_attr_releaseNanyong Sun1-5/+3
[ Upstream commit dbc6e7d44a514f231a64d9d5676e001b660b6448 ] In nilfs_##name##_attr_release, kobj->parent should not be referenced because it is a NULL pointer. The release() method of kobject is always called in kobject_put(kobj), in the implementation of kobject_put(), the kobj->parent will be assigned as NULL before call the release() method. So just use kobj to get the subgroups, which is more efficient and can fix a NULL pointer reference problem. Link: https://lkml.kernel.org/r/20210629022556.3985106-3-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-3-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: fix memory leak in nilfs_sysfs_create_device_groupNanyong Sun1-4/+2
[ Upstream commit 5f5dec07aca7067216ed4c1342e464e7307a9197 ] Patch series "nilfs2: fix incorrect usage of kobject". This patchset from Nanyong Sun fixes memory leak issues and a NULL pointer dereference issue caused by incorrect usage of kboject in nilfs2 sysfs implementation. This patch (of 6): Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888100ca8988 (size 8): comm "syz-executor.1", pid 1930, jiffies 4294745569 (age 18.052s) hex dump (first 8 bytes): 6c 6f 6f 70 31 00 ff ff loop1... backtrace: kstrdup+0x36/0x70 mm/util.c:60 kstrdup_const+0x35/0x60 mm/util.c:83 kvasprintf_const+0xf1/0x180 lib/kasprintf.c:48 kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289 kobject_add_varg lib/kobject.c:384 [inline] kobject_init_and_add+0xc9/0x150 lib/kobject.c:473 nilfs_sysfs_create_device_group+0x150/0x7d0 fs/nilfs2/sysfs.c:986 init_nilfs+0xa21/0xea0 fs/nilfs2/the_nilfs.c:637 nilfs_fill_super fs/nilfs2/super.c:1046 [inline] nilfs_mount+0x7b4/0xe80 fs/nilfs2/super.c:1316 legacy_get_tree+0x105/0x210 fs/fs_context.c:592 vfs_get_tree+0x8e/0x2d0 fs/super.c:1498 do_new_mount fs/namespace.c:2905 [inline] path_mount+0xf9b/0x1990 fs/namespace.c:3235 do_mount+0xea/0x100 fs/namespace.c:3248 __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount fs/namespace.c:3433 [inline] __x64_sys_mount+0x14b/0x1f0 fs/namespace.c:3433 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae If kobject_init_and_add return with error, then the cleanup of kobject is needed because memory may be allocated in kobject_init_and_add without freeing. And the place of cleanup_dev_kobject should use kobject_put to free the memory associated with the kobject. As the section "Kobject removal" of "Documentation/core-api/kobject.rst" says, kobject_del() just makes the kobject "invisible", but it is not cleaned up. And no more cleanup will do after cleanup_dev_kobject, so kobject_put is needed here. Link: https://lkml.kernel.org/r/1625651306-10829-1-git-send-email-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/1625651306-10829-2-git-send-email-konishi.ryusuke@gmail.com Reported-by: Hulk Robot <hulkci@huawei.com> Link: https://lkml.kernel.org/r/20210629022556.3985106-2-sunnanyong@huawei.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26nilfs2: use refcount_dec_and_lock() to fix potential UAFZhen Lei1-5/+4
commit 98e2e409e76ef7781d8511f997359e9c504a95c1 upstream. When the refcount is decreased to 0, the resource reclamation branch is entered. Before CPU0 reaches the race point (1), CPU1 may obtain the spinlock and traverse the rbtree to find 'root', see nilfs_lookup_root(). Although CPU1 will call refcount_inc() to increase the refcount, it is obviously too late. CPU0 will release 'root' directly, CPU1 then accesses 'root' and triggers UAF. Use refcount_dec_and_lock() to ensure that both the operations of decrease refcount to 0 and link deletion are lock protected eliminates this risk. CPU0 CPU1 nilfs_put_root(): <-------- (1) spin_lock(&nilfs->ns_cptree_lock); rb_erase(&root->rb_node, &nilfs->ns_cptree); spin_unlock(&nilfs->ns_cptree_lock); kfree(root); <-------- use-after-free refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 9476 at lib/refcount.c:28 \ refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28 Modules linked in: CPU: 2 PID: 9476 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... RIP: 0010:refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28 ... ... Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] nilfs_put_root+0xc1/0xd0 fs/nilfs2/the_nilfs.c:795 nilfs_segctor_destroy fs/nilfs2/segment.c:2749 [inline] nilfs_detach_log_writer+0x3fa/0x570 fs/nilfs2/segment.c:2812 nilfs_put_super+0x2f/0xf0 fs/nilfs2/super.c:467 generic_shutdown_super+0xcd/0x1f0 fs/super.c:464 kill_block_super+0x4a/0x90 fs/super.c:1446 deactivate_locked_super+0x6a/0xb0 fs/super.c:335 deactivate_super+0x85/0x90 fs/super.c:366 cleanup_mnt+0x277/0x2e0 fs/namespace.c:1118 __cleanup_mnt+0x15/0x20 fs/namespace.c:1125 task_work_run+0x8e/0x110 kernel/task_work.c:151 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:164 [inline] exit_to_user_mode_prepare+0x13c/0x170 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x16/0x30 kernel/entry/common.c:266 do_syscall_64+0x45/0x80 arch/x86/entry/common.c:56 entry_SYSCALL_64_after_hwframe+0x44/0xa9 There is no reproduction program, and the above is only theoretical analysis. Link: https://lkml.kernel.org/r/1629859428-5906-1-git-send-email-konishi.ryusuke@gmail.com Fixes: ba65ae4729bf ("nilfs2: add checkpoint tree to nilfs object") Link: https://lkml.kernel.org/r/20210723012317.4146-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-30nilfs2: fix memory leak in nilfs_sysfs_delete_device_groupPavel Skripkin1-0/+1
[ Upstream commit 8fd0c1b0647a6bda4067ee0cd61e8395954b6f28 ] My local syzbot instance hit memory leak in nilfs2. The problem was in missing kobject_put() in nilfs_sysfs_delete_device_group(). kobject_del() does not call kobject_cleanup() for passed kobject and it leads to leaking duped kobject name if kobject_put() was not called. Fail log: BUG: memory leak unreferenced object 0xffff8880596171e0 (size 8): comm "syz-executor379", pid 8381, jiffies 4294980258 (age 21.100s) hex dump (first 8 bytes): 6c 6f 6f 70 30 00 00 00 loop0... backtrace: kstrdup+0x36/0x70 mm/util.c:60 kstrdup_const+0x53/0x80 mm/util.c:83 kvasprintf_const+0x108/0x190 lib/kasprintf.c:48 kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289 kobject_add_varg lib/kobject.c:384 [inline] kobject_init_and_add+0xc9/0x160 lib/kobject.c:473 nilfs_sysfs_create_device_group+0x150/0x800 fs/nilfs2/sysfs.c:999 init_nilfs+0xe26/0x12b0 fs/nilfs2/the_nilfs.c:637 Link: https://lkml.kernel.org/r/20210612140559.20022-1-paskripkin@gmail.com Fixes: da7141fb78db ("nilfs2: add /sys/fs/nilfs2/<device> group") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13nilfs2: make splice write available againJoachim Henke1-0/+1
commit a35d8f016e0b68634035217d06d1c53863456b50 upstream. Since 5.10, splice() or sendfile() to NILFS2 return EINVAL. This was caused by commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops"). This patch initializes the splice_write field in file_operations, like most file systems do, to restore the functionality. Link: https://lkml.kernel.org/r/1612784101-14353-1-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Joachim Henke <joachim.henke@t-systems.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> [5.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-24Merge branch 'work.misc' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff all over the place (the largest group here is Christoph's stat cleanups)" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: remove KSTAT_QUERY_FLAGS fs: remove vfs_stat_set_lookup_flags fs: move vfs_fstatat out of line fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat fs: remove vfs_statx_fd fs: omfs: use kmemdup() rather than kmalloc+memcpy [PATCH] reduce boilerplate in fsid handling fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS selftests: mount: add nosymfollow tests Add a "nosymfollow" mount option.
2020-10-16nilfs2: fix some kernel-doc warnings for nilfs2Wang Hai4-7/+6
Fixes the following W=1 kernel build warning(s): fs/nilfs2/bmap.c:378: warning: Excess function parameter 'bhp' description in 'nilfs_bmap_assign' fs/nilfs2/cpfile.c:907: warning: Excess function parameter 'status' description in 'nilfs_cpfile_change_cpmode' fs/nilfs2/cpfile.c:946: warning: Excess function parameter 'stat' description in 'nilfs_cpfile_get_stat' fs/nilfs2/page.c:76: warning: Excess function parameter 'inode' description in 'nilfs_forget_buffer' fs/nilfs2/sufile.c:563: warning: Excess function parameter 'stat' description in 'nilfs_sufile_get_stat' Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/1601386269-2423-1-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-18[PATCH] reduce boilerplate in fsid handlingAl Viro1-2/+1
Get rid of boilerplate in most of ->statfs() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva3-9/+14
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-12nilfs2: use a more common logging styleJoe Perches20-251/+239
Add macros for nilfs_<level>(sb, fmt, ...) and convert the uses of 'nilfs_msg(sb, KERN_<LEVEL>, ...)' to 'nilfs_<level>(sb, ...)' so nilfs2 uses a logging style more like the typical kernel logging style. Miscellanea: o Realign arguments for these uses Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1595860111-3920-4-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12nilfs2: convert __nilfs_msg to integrate the level and formatJoe Perches2-10/+15
Reduce object size a bit by removing the KERN_<LEVEL> as a separate argument and adding it to the format string. Reduce overall object size by about ~.5% (x86-64 defconfig w/ nilfs2) old: $ size -t fs/nilfs2/built-in.a | tail -1 191738 8676 44 200458 30f0a (TOTALS) new: $ size -t fs/nilfs2/built-in.a | tail -1 190971 8676 44 199691 30c0b (TOTALS) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1595860111-3920-3-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12nilfs2: only call unlock_new_inode() if I_NEWEric Biggers1-1/+2
Patch series "nilfs2 updates". This patch (of 3): unlock_new_inode() is only meant to be called after a new inode has already been inserted into the hash table. But nilfs_new_inode() can call it even before it has inserted the inode, triggering the WARNING in unlock_new_inode(). Fix this by only calling unlock_new_inode() if the inode has the I_NEW flag set, indicating that it's in the table. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1595860111-3920-1-git-send-email-konishi.ryusuke@gmail.com Link: http://lkml.kernel.org/r/1595860111-3920-2-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-11nilfs2: fix null pointer dereference at nilfs_segctor_do_construct()Ryusuke Konishi1-0/+2
After commit c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping has no dirty pages"), the following null pointer dereference has been reported on nilfs2: BUG: kernel NULL pointer dereference, address: 00000000000000a8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI ... RIP: 0010:percpu_counter_add_batch+0xa/0x60 ... Call Trace: __test_set_page_writeback+0x2d3/0x330 nilfs_segctor_do_construct+0x10d3/0x2110 [nilfs2] nilfs_segctor_construct+0x168/0x260 [nilfs2] nilfs_segctor_thread+0x127/0x3b0 [nilfs2] kthread+0xf8/0x130 ... This crash turned out to be caused by set_page_writeback() call for segment summary buffers at nilfs_segctor_prepare_write(). set_page_writeback() can call inc_wb_stat(inode_to_wb(inode), WB_WRITEBACK) where inode_to_wb(inode) is NULL if the inode of underlying block device does not have an associated wb. This fixes the issue by calling inode_attach_wb() in advance to ensure to associate the bdev inode with its wb. Fixes: c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping has no dirty pages") Reported-by: Walton Hoops <me@waltonhoops.com> Reported-by: Tomas Hlavaty <tom@logand.com> Reported-by: ARAI Shun-ichi <hermes@ceres.dti.ne.jp> Reported-by: Hideki EIRAKU <hdk1983@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> [5.4+] Link: http://lkml.kernel.org/r/20200608.011819.1399059588922299158.konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-06Merge tag 'ext4_for_linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "A lot of bug fixes and cleanups for ext4, including: - Fix performance problems found in dioread_nolock now that it is the default, caused by transaction leaks. - Clean up fiemap handling in ext4 - Clean up and refactor multiple block allocator (mballoc) code - Fix a problem with mballoc with a smaller file systems running out of blocks because they couldn't properly use blocks that had been reserved by inode preallocation. - Fixed a race in ext4_sync_parent() versus rename() - Simplify the error handling in the extent manipulation code - Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers. - Avoid passing an error pointer to brelse in ext4_xattr_set() - Fix race which could result to freeing an inode on the dirty last in data=journal mode. - Fix refcount handling if ext4_iget() fails - Fix a crash in generic/019 caused by a corrupted extent node" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits) ext4: avoid unnecessary transaction starts during writeback ext4: don't block for O_DIRECT if IOCB_NOWAIT is set ext4: remove the access_ok() check in ext4_ioctl_get_es_cache fs: remove the access_ok() check in ioctl_fiemap fs: handle FIEMAP_FLAG_SYNC in fiemap_prep fs: move fiemap range validation into the file systems instances iomap: fix the iomap_fiemap prototype fs: move the fiemap definitions out of fs.h fs: mark __generic_block_fiemap static ext4: remove the call to fiemap_check_flags in ext4_fiemap ext4: split _ext4_fiemap ext4: fix fiemap size checks for bitmap files ext4: fix EXT4_MAX_LOGICAL_BLOCK macro add comment for ext4_dir_entry_2 file_type member jbd2: avoid leaking transaction credits when unreserving handle ext4: drop ext4_journal_free_reserved() ext4: mballoc: use lock for checking free blocks while retrying ext4: mballoc: refactor ext4_mb_good_group() ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling ext4: mballoc: refactor ext4_mb_discard_preallocations() ...
2020-06-04fs: handle FIEMAP_FLAG_SYNC in fiemap_prepChristoph Hellwig1-1/+1
By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is handled once instead of duplicated, but can still be done under fs locks, like xfs/iomap intended with its duplicate handling. Also make sure the error value of filemap_write_and_wait is propagated to user space. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.de Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-04fs: move fiemap range validation into the file systems instancesChristoph Hellwig1-1/+1
Replace fiemap_check_flags with a fiemap_prep helper that also takes the inode and mapped range, and performs the sanity check and truncation previously done in fiemap_check_range. This way the validation is inside the file system itself and thus properly works for the stacked overlayfs case as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20200523073016.2944131-7-hch@lst.de Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-04fs: move the fiemap definitions out of fs.hChristoph Hellwig1-0/+1
No need to pull the fiemap definitions into almost every file in the kernel build. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...
2020-06-02fs: convert mpage_readpages to mpage_readaheadMatthew Wilcox (Oracle)1-12/+3
Implement the new readahead aop and convert all callers (block_dev, exfat, ext2, fat, gfs2, hpfs, isofs, jfs, nilfs2, ocfs2, omfs, qnx6, reiserfs & udf). The callers are all trivial except for GFS2 & OCFS2. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> # ocfs2 Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> # ocfs2 Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Gao Xiang <gaoxiang25@huawei.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Link: http://lkml.kernel.org/r/20200414150233.24495-17-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-22block: remove the error_sector argument to blkdev_issue_flushChristoph Hellwig1-1/+1
The argument isn't used by any caller, and drivers don't fill out bi_sector for flush requests either. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-23fs: compat_ioctl: move FITRIM emulation into file systemsArnd Bergmann1-0/+1
Remove the special case for FITRIM, and make file systems handle that like all other ioctl commands with their own handlers. Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: linux-nilfs@vger.kernel.org Cc: ocfs2-devel@oss.oracle.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-07-01vfs: create a generic checking and prep function for FS_IOC_SETFLAGSDarrick J. Wong1-7/+2
Create a generic function to check incoming FS_IOC_SETFLAGS flag values and later prepare the inode for updates so that we can standardize the implementations that follow ext4's flag values. Note that the efivarfs implementation no longer fails a no-op SETFLAGS without CAP_LINUX_IMMUTABLE since that's the behavior in ext*. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02nilfs2: switch to ->free_inode()Al Viro2-11/+2
kill an extern that went stale 9 years ago, while we are at it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-06XArray: Change xa_insert to return -EBUSYMatthew Wilcox1-1/+1
Userspace translates EEXIST to "File exists" which isn't a very good error message for the problem. "Device or resource busy" is a better indication of what went wrong. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-11-05nilfs2: Use xa_erase_irqMatthew Wilcox1-3/+1
This code simply opencoded xa_erase_irq(). Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-10-21nilfs2: Convert to XArrayMatthew Wilcox2-33/+22
This is close to a 1:1 replacement of radix tree APIs with their XArray equivalents. It would be possible to optimise nilfs_copy_back_pages(), but that doesn't seem to be in the performance path. Also, I think it has a pre-existing bug, and I've added a note to that effect in the source code. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-09-05nilfs2: convert to SPDX license tagsRyusuke Konishi39-390/+39
Remove the verbose license text from NILFS2 files and replace them with SPDX tags. This does not change the license of any of the code. Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22fs/nilfs2/file.c: use new return type vm_fault_tSouptick Joarder1-1/+1
Use new return type vm_fault_t for page_mkwrite handler. Link: http://lkml.kernel.org/r/1529555928-2411-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22nilfs2: use 64-bit superblock timstampsArnd Bergmann1-1/+1
The mount time field in the superblock uses a 64-bit timestamp, but calling get_seconds() may truncate the current time to 32 bits. This changes it to ktime_get_real_seconds() to avoid the potential overflow. Link: http://lkml.kernel.org/r/20180620075041.4154396-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-11do d_instantiate/unlock_new_inode combinations safelyAl Viro1-4/+2
For anything NFS-exported we do _not_ want to unlock new inode before it has grown an alias; original set of fixes got the ordering right, but missed the nasty complication in case of lockdep being enabled - unlock_new_inode() does lockdep_annotate_inode_mutex_key(inode) which can only be done before anyone gets a chance to touch ->i_mutex. Unfortunately, flipping the order and doing unlock_new_inode() before d_instantiate() opens a window when mkdir can race with open-by-fhandle on a guessed fhandle, leading to multiple aliases for a directory inode and all the breakage that follows from that. Correct solution: a new primitive (d_instantiate_new()) combining these two in the right order - lockdep annotate, then d_instantiate(), then the rest of unlock_new_inode(). All combinations of d_instantiate() with unlock_new_inode() should be converted to that. Cc: stable@kernel.org # 2.6.29 and later Tested-by: Mike Marshall <hubcap@omnibond.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-16 10:34:12 +0300