summaryrefslogtreecommitdiff
path: root/fs/splice.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-21mm: Convert remove_mapping() to take a folioMatthew Wilcox (Oracle)1-3/+2
Add kernel-doc and return the number of pages removed in order to get the statistics right in __invalidate_mapping_pages(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
2022-03-21splice: Use a folio in page_cache_pipe_buf_try_steal()Matthew Wilcox (Oracle)1-10/+11
This saves a lot of calls to compound_head(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
2021-02-21Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+6
Pull core block updates from Jens Axboe: "Another nice round of removing more code than what is added, mostly due to Christoph's relentless pursuit of tech debt removal/cleanups. This pull request contains: - Two series of BFQ improvements (Paolo, Jan, Jia) - Block iov_iter improvements (Pavel) - bsg error path fix (Pan) - blk-mq scheduler improvements (Jan) - -EBUSY discard fix (Jan) - bvec allocation improvements (Ming, Christoph) - bio allocation and init improvements (Christoph) - Store bdev pointer in bio instead of gendisk + partno (Christoph) - Block trace point cleanups (Christoph) - hard read-only vs read-only split (Christoph) - Block based swap cleanups (Christoph) - Zoned write granularity support (Damien) - Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)" * tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits) mm: simplify swapdev_block sd_zbc: clear zone resources for non-zoned case block: introduce blk_queue_clear_zone_settings() zonefs: use zone write granularity as block size block: introduce zone_write_granularity limit block: use blk_queue_set_zoned in add_partition() nullb: use blk_queue_set_zoned() to setup zoned devices nvme: cleanup zone information initialization block: document zone_append_max_bytes attribute block: use bi_max_vecs to find the bvec pool md/raid10: remove dead code in reshape_request block: mark the bio as cloned in bio_iov_bvec_set block: set BIO_NO_PAGE_REF in bio_iov_bvec_set block: remove a layer of indentation in bio_iov_iter_get_pages block: turn the nr_iovecs argument to bio_alloc* into an unsigned short block: remove the 1 and 4 vec bvec_slabs entries block: streamline bvec_alloc block: factor out a bvec_alloc_gfp helper block: move struct biovec_slab to bio.c block: reuse BIO_INLINE_VECS for integrity bvecs ...
2021-01-26teach sendfile(2) to handle send-to-pipe directlyAl Viro1-1/+1
no point going through the intermediate pipe Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-26take the guts of file-to-pipe splice into a helper functionAl Viro1-7/+18
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-26do_splice_to(): move the logics for limiting the read length inAl Viro1-14/+7
Both callers have the identical logics limiting the amount of data we try to read into pipe - no more than would fit into that pipe. Move that into do_splice_to() itself. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-25splice: don't generate zero-len segement bvecsPavel Begunkov1-3/+6
iter_file_splice_write() may spawn bvec segments with zero-length. In preparation for prohibiting them, filter out by hand at splice level. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-24Merge tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-blockLinus Torvalds1-13/+50
Pull io_uring fixes from Jens Axboe: - fsize was missed in previous unification of work flags - Few fixes cleaning up the flags unification creds cases (Pavel) - Fix NUMA affinities for completely unplugged/replugged node for io-wq - Two fallout fixes from the set_fs changes. One local to io_uring, one for the splice entry point that io_uring uses. - Linked timeout fixes (Pavel) - Removal of ->flush() ->files work-around that we don't need anymore with referenced files (Pavel) - Various cleanups (Pavel) * tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block: splice: change exported internal do_splice() helper to take kernel offset io_uring: make loop_rw_iter() use original user supplied pointers io_uring: remove req cancel in ->flush() io-wq: re-set NUMA node affinities if CPUs come online io_uring: don't reuse linked_timeout io_uring: unify fsize with def->work_flags io_uring: fix racy REQ_F_LINK_TIMEOUT clearing io_uring: do poll's hash_node init in common code io_uring: inline io_poll_task_handler() io_uring: remove extra ->file check in poll prep io_uring: make cached_cq_overflow non atomic_t io_uring: inline io_fail_links() io_uring: kill ref get/drop in personality init io_uring: flags-based creds init in queue
2020-10-22splice: change exported internal do_splice() helper to take kernel offsetJens Axboe1-13/+50
With the set_fs change, we can no longer rely on copy_{to,from}_user() accepting a kernel pointer, and it was bad form to do so anyway. Clean this up and change the internal helper that io_uring uses to deal with kernel pointers instead. This puts the offset copy in/out in __do_splice() instead, which just calls the same helper. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-22Merge branch 'work.set_fs' of ↵Linus Torvalds1-116/+14
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode
2020-10-13Merge branch 'work.iov_iter' of ↵Linus Torvalds1-44/+13
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat iovec cleanups from Al Viro: "Christoph's series around import_iovec() and compat variant thereof" * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: security/keys: remove compat_keyctl_instantiate_key_iov mm: remove compat_process_vm_{readv,writev} fs: remove compat_sys_vmsplice fs: remove the compat readv/writev syscalls fs: remove various compat readv/writev helpers iov_iter: transparently handle compat iovecs in import_iovec iov_iter: refactor rw_copy_check_uvector and import_iovec iov_iter: move rw_copy_check_uvector() into lib/iov_iter.c compat.h: fix a spelling error in <linux/compat.h>
2020-10-06splice: teach splice pipe reading about empty pipe buffersLinus Torvalds1-0/+20
Tetsuo Handa reports that splice() can return 0 before the real EOF, if the data in the splice source pipe is an empty pipe buffer. That empty pipe buffer case doesn't happen in any normal situation, but you can trigger it by doing a write to a pipe that fails due to a page fault. Tetsuo has a test-case to show the behavior: #define _GNU_SOURCE #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> int main(int argc, char *argv[]) { const int fd = open("/tmp/testfile", O_WRONLY | O_CREAT, 0600); int pipe_fd[2] = { -1, -1 }; pipe(pipe_fd); write(pipe_fd[1], NULL, 4096); /* This splice() should wait unless interrupted. */ return !splice(pipe_fd[0], NULL, fd, NULL, 65536, 0); } which results in write(5, NULL, 4096) = -1 EFAULT (Bad address) splice(4, NULL, 3, NULL, 65536, 0) = 0 and this can confuse splice() users into believing they have hit EOF prematurely. The issue was introduced when the pipe write code started pre-allocating the pipe buffers before copying data from user space. This is modified verion of Tetsuo's original patch. Fixes: a194dfe6e6f6 ("pipe: Rearrange sequence in pipe_write() to preallocate slot") Link:https://lore.kernel.org/linux-fsdevel/20201005121339.4063-1-penguin-kernel@I-love.SAKURA.ne.jp/ Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Acked-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03fs: remove compat_sys_vmspliceChristoph Hellwig1-44/+13
Now that import_iovec handles compat iovecs, the native vmsplice syscall can be used for the compat case as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-03iov_iter: transparently handle compat iovecs in import_iovecChristoph Hellwig1-1/+1
Use in compat_syscall to import either native or the compat iovecs, and remove the now superflous compat_import_iovec. This removes the need for special compat logic in most callers, and the remaining ones can still be simplified by using __import_iovec with a bool compat parameter. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-02pipe: remove pipe_wait() and fix wakeup race with spliceLinus Torvalds1-4/+4
The pipe splice code still used the old model of waiting for pipe IO by using a non-specific "pipe_wait()" that waited for any pipe event to happen, which depended on all pipe IO being entirely serialized by the pipe lock. So by checking the state you were waiting for, and then adding yourself to the wait queue before dropping the lock, you were guaranteed to see all the wakeups. Strictly speaking, the actual wakeups were not done under the lock, but the pipe_wait() model still worked, because since the waiter held the lock when checking whether it should sleep, it would always see the current state, and the wakeup was always done after updating the state. However, commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") split the single wait-queue into two, and in the process also made the "wait for event" code wait for _two_ wait queues, and that then showed a race with the wakers that were not serialized by the pipe lock. It's only splice that used that "pipe_wait()" model, so the problem wasn't obvious, but Josef Bacik reports: "I hit a hang with fstest btrfs/187, which does a btrfs send into /dev/null. This works by creating a pipe, the write side is given to the kernel to write into, and the read side is handed to a thread that splices into a file, in this case /dev/null. The box that was hung had the write side stuck here [pipe_write] and the read side stuck here [splice_from_pipe_next -> pipe_wait]. [ more details about pipe_wait() scenario ] The problem is we're doing the prepare_to_wait, which sets our state each time, however we can be woken up either with reads or writes. In the case above we race with the WRITER waking us up, and re-set our state to INTERRUPTIBLE, and thus never break out of schedule" Josef had a patch that avoided the issue in pipe_wait() by just making it set the state only once, but the deeper problem is that pipe_wait() depends on a level of synchonization by the pipe mutex that it really shouldn't. And the whole "wait for any pipe state change" model really isn't very good to begin with. So rather than trying to work around things in pipe_wait(), remove that legacy model of "wait for arbitrary pipe event" entirely, and actually create functions that wait for the pipe actually being readable or writable, and can do so without depending on the pipe lock serializing everything. Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/ Reported-by: Josef Bacik <josef@toxicpanda.com> Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-09fs: don't allow splice read/write without explicit opsChristoph Hellwig1-116/+14
default_file_splice_write is the last piece of generic code that uses set_fs to make the uaccess routines operate on kernel pointers. It implements a "fallback loop" for splicing from files that do not actually provide a proper splice_read method. The usual file systems and other high bandwidth instances all provide a ->splice_read, so this just removes support for various device drivers and procfs/debugfs files. If splice support for any of those turns out to be important it can be added back by switching them to the iter ops and using generic_file_splice_read. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-06-13Merge tag 'notifications-20200601' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull notification queue from David Howells: "This adds a general notification queue concept and adds an event source for keys/keyrings, such as linking and unlinking keys and changing their attributes. Thanks to Debarshi Ray, we do have a pull request to use this to fix a problem with gnome-online-accounts - as mentioned last time: https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47 Without this, g-o-a has to constantly poll a keyring-based kerberos cache to find out if kinit has changed anything. [ There are other notification pending: mount/sb fsinfo notifications for libmount that Karel Zak and Ian Kent have been working on, and Christian Brauner would like to use them in lxc, but let's see how this one works first ] LSM hooks are included: - A set of hooks are provided that allow an LSM to rule on whether or not a watch may be set. Each of these hooks takes a different "watched object" parameter, so they're not really shareable. The LSM should use current's credentials. [Wanted by SELinux & Smack] - A hook is provided to allow an LSM to rule on whether or not a particular message may be posted to a particular queue. This is given the credentials from the event generator (which may be the system) and the watch setter. [Wanted by Smack] I've provided SELinux and Smack with implementations of some of these hooks. WHY === Key/keyring notifications are desirable because if you have your kerberos tickets in a file/directory, your Gnome desktop will monitor that using something like fanotify and tell you if your credentials cache changes. However, we also have the ability to cache your kerberos tickets in the session, user or persistent keyring so that it isn't left around on disk across a reboot or logout. Keyrings, however, cannot currently be monitored asynchronously, so the desktop has to poll for it - not so good on a laptop. This facility will allow the desktop to avoid the need to poll. DESIGN DECISIONS ================ - The notification queue is built on top of a standard pipe. Messages are effectively spliced in. The pipe is opened with a special flag: pipe2(fds, O_NOTIFICATION_PIPE); The special flag has the same value as O_EXCL (which doesn't seem like it will ever be applicable in this context)[?]. It is given up front to make it a lot easier to prohibit splice&co from accessing the pipe. [?] Should this be done some other way? I'd rather not use up a new O_* flag if I can avoid it - should I add a pipe3() system call instead? The pipe is then configured:: ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth); ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter); Messages are then read out of the pipe using read(). - It should be possible to allow write() to insert data into the notification pipes too, but this is currently disabled as the kernel has to be able to insert messages into the pipe *without* holding pipe->mutex and the code to make this work needs careful auditing. - sendfile(), splice() and vmsplice() are disabled on notification pipes because of the pipe->mutex issue and also because they sometimes want to revert what they just did - but one or more notification messages might've been interleaved in the ring. - The kernel inserts messages with the wait queue spinlock held. This means that pipe_read() and pipe_write() have to take the spinlock to update the queue pointers. - Records in the buffer are binary, typed and have a length so that they can be of varying size. This allows multiple heterogeneous sources to share a common buffer; there are 16 million types available, of which I've used just a few, so there is scope for others to be used. Tags may be specified when a watchpoint is created to help distinguish the sources. - Records are filterable as types have up to 256 subtypes that can be individually filtered. Other filtration is also available. - Notification pipes don't interfere with each other; each may be bound to a different set of watches. Any particular notification will be copied to all the queues that are currently watching for it - and only those that are watching for it. - When recording a notification, the kernel will not sleep, but will rather mark a queue as having lost a message if there's insufficient space. read() will fabricate a loss notification message at an appropriate point later. - The notification pipe is created and then watchpoints are attached to it, using one of: keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01); watch_mount(AT_FDCWD, "/", 0, fd, 0x02); watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03); where in both cases, fd indicates the queue and the number after is a tag between 0 and 255. - Watches are removed if either the notification pipe is destroyed or the watched object is destroyed. In the latter case, a message will be generated indicating the enforced watch removal. Things I want to avoid: - Introducing features that make the core VFS dependent on the network stack or networking namespaces (ie. usage of netlink). - Dumping all this stuff into dmesg and having a daemon that sits there parsing the output and distributing it as this then puts the responsibility for security into userspace and makes handling namespaces tricky. Further, dmesg might not exist or might be inaccessible inside a container. - Letting users see events they shouldn't be able to see. TESTING AND MANPAGES ==================== - The keyutils tree has a pipe-watch branch that has keyctl commands for making use of notifications. Proposed manual pages can also be found on this branch, though a couple of them really need to go to the main manpages repository instead. If the kernel supports the watching of keys, then running "make test" on that branch will cause the testing infrastructure to spawn a monitoring process on the side that monitors a notifications pipe for all the key/keyring changes induced by the tests and they'll all be checked off to make sure they happened. https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch - A test program is provided (samples/watch_queue/watch_test) that can be used to monitor for keyrings, mount and superblock events. Information on the notifications is simply logged to stdout" * tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: smack: Implement the watch_key and post_notification hooks selinux: Implement the watch_key security hook keys: Make the KEY_NEED_* perms an enum rather than a mask pipe: Add notification lossage handling pipe: Allow buffers to be marked read-whole-or-error for notifications Add sample notification program watch_queue: Add a key/keyring notification facility security: Add hooks to rule on setting a watch pipe: Add general notification queue support pipe: Add O_NOTIFICATION_PIPE security: Add a hook for the point of notification insertion uapi: General notification queue definitions
2020-06-04Merge branch 'work.splice' of ↵Linus Torvalds1-52/+29
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull splice updates from Al Viro: "Christoph's assorted splice cleanups" * 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: rename pipe_buf ->steal to ->try_steal fs: make the pipe_buf_operations ->confirm operation optional fs: make the pipe_buf_operations ->steal operation optional trace: remove tracing_pipe_buf_ops pipe: merge anon_pipe_buf*_ops fs: simplify do_splice_from fs: simplify do_splice_to
2020-06-03Merge tag 'for-5.8/io_uring-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+1
Pull io_uring updates from Jens Axboe: "A relatively quiet round, mostly just fixes and code improvements. In particular: - Make statx just use the generic statx handler, instead of open coding it. We don't need that anymore, as we always call it async safe (Bijan) - Enable closing of the ring itself. Also fixes O_PATH closure (me) - Properly name completion members (me) - Batch reap of dead file registrations (me) - Allow IORING_OP_POLL with double waitqueues (me) - Add tee(2) support (Pavel) - Remove double off read (Pavel) - Fix overflow cancellations (Pavel) - Improve CQ timeouts (Pavel) - Async defer drain fixes (Pavel) - Add support for enabling/disabling notifications on a registered eventfd (Stefano) - Remove dead state parameter (Xiaoguang) - Disable SQPOLL submit on dying ctx (Xiaoguang) - Various code cleanups" * tag 'for-5.8/io_uring-2020-06-01' of git://git.kernel.dk/linux-block: (29 commits) io_uring: fix overflowed reqs cancellation io_uring: off timeouts based only on completions io_uring: move timeouts flushing to a helper statx: hide interfaces no longer used by io_uring io_uring: call statx directly statx: allow system call to be invoked from io_uring io_uring: add io_statx structure io_uring: get rid of manual punting in io_close io_uring: separate DRAIN flushing into a cold path io_uring: don't re-read sqe->off in timeout_prep() io_uring: simplify io_timeout locking io_uring: fix flush req->refs underflow io_uring: don't submit sqes when ctx->refs is dying io_uring: async task poll trigger cleanup io_uring: add tee(2) support splice: export do_tee() io_uring: don't repeat valid flag list io_uring: rename io_file_put() io_uring: remove req->needs_fixed_files io_uring: cleanup io_poll_remove_one() logic ...
2020-05-20pipe: Fix pipe_full() test in opipe_prep().Tetsuo Handa1-1/+1
syzbot is reporting that splice()ing from non-empty read side to already-full write side causes unkillable task, for opipe_prep() is by error not inverting pipe_full() test. CPU: 0 PID: 9460 Comm: syz-executor.5 Not tainted 5.6.0-rc3-next-20200228-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rol32 include/linux/bitops.h:105 [inline] RIP: 0010:iterate_chain_key kernel/locking/lockdep.c:369 [inline] RIP: 0010:__lock_acquire+0x6a3/0x5270 kernel/locking/lockdep.c:4178 Call Trace: lock_acquire+0x197/0x420 kernel/locking/lockdep.c:4720 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x156/0x13c0 kernel/locking/mutex.c:1103 pipe_lock_nested fs/pipe.c:66 [inline] pipe_double_lock+0x1a0/0x1e0 fs/pipe.c:104 splice_pipe_to_pipe fs/splice.c:1562 [inline] do_splice+0x35f/0x1520 fs/splice.c:1141 __do_sys_splice fs/splice.c:1447 [inline] __se_sys_splice fs/splice.c:1427 [inline] __x64_sys_splice+0x2b5/0x320 fs/splice.c:1427 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: syzbot+b48daca8639150bc5e73@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=9386d051e11e09973d5a4cf79af5e8cedf79386d Fixes: 8cefc107ca54c8b0 ("pipe: Use head and tail pointers for the ring, not cursor and length") Cc: stable@vger.kernel.org # 5.5+ Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-20fs: rename pipe_buf ->steal to ->try_stealChristoph Hellwig1-20/+20
And replace the arcane return value convention with a simple bool where true means success and false means failure. [AV: braino fix folded in] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20fs: make the pipe_buf_operations ->confirm operation optionalChristoph Hellwig1-3/+0
Just return 0 for success if it is not present. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20fs: make the pipe_buf_operations ->steal operation optionalChristoph Hellwig1-7/+0
Just return 1 for failure if it is not present. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20pipe: merge anon_pipe_buf*_opsChristoph Hellwig1-7/+5
All the op vectors are exactly the same, they are just used to encode packet or nomerge behavior. There already is a flag for the packet behavior, so just add a new one to allow for merging. Inverting it vs the previous nomerge special casing actually allows for much nicer code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20fs: simplify do_splice_fromChristoph Hellwig1-8/+2
No need for a local function pointer when we can trivial branch on the ->splice_write presence. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20fs: simplify do_splice_toChristoph Hellwig1-7/+2
No need for a local function pointer when we can trivial branch on the ->splice_read presence. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-19pipe: Add general notification queue supportDavid Howells1-6/+6
Make it possible to have a general notification queue built on top of a standard pipe. Notifications are 'spliced' into the pipe and then read out. splice(), vmsplice() and sendfile() are forbidden on pipes used for notifications as post_one_notification() cannot take pipe->mutex. This means that notifications could be posted in between individual pipe buffers, making iov_iter_revert() difficult to effect. The way the notification queue is used is: (1) An application opens a pipe with a special flag and indicates the number of messages it wishes to be able to queue at once (this can only be set once): pipe2(fds, O_NOTIFICATION_PIPE); ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth); (2) The application then uses poll() and read() as normal to extract data from the pipe. read() will return multiple notifications if the buffer is big enough, but it will not split a notification across buffers - rather it will return a short read or EMSGSIZE. Notification messages include a length in the header so that the caller can split them up. Each message has a header that describes it: struct watch_notification { __u32 type:24; __u32 subtype:8; __u32 info; }; The type indicates the source (eg. mount tree changes, superblock events, keyring changes, block layer events) and the subtype indicates the event type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field indicates a number of things, including the entry length, an ID assigned to a watchpoint contributing to this buffer and type-specific flags. Supplementary data, such as the key ID that generated an event, can be attached in additional slots. The maximum message size is 127 bytes. Messages may not be padded or aligned, so there is no guarantee, for example, that the notification type will be on a 4-byte bounary. Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-17splice: export do_tee()Pavel Begunkov1-2/+1
export do_tee() for use in io_uring Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-07splice: move f_mode checks to do_{splice,tee}()Pavel Begunkov1-27/+18
do_splice() is used by io_uring, as will be do_tee(). Move f_mode checks from sys_{splice,tee}() to do_{splice,tee}(), so they're enforced for io_uring as well. Fixes: 7d67af2c0134 ("io_uring: add splice(2) support") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-03splice: make do_splice publicPavel Begunkov1-3/+3
Make do_splice(), so other kernel parts can reuse it Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-08pipe: use exclusive waits when reading or writingLinus Torvalds1-4/+4
This makes the pipe code use separate wait-queues and exclusive waiting for readers and writers, avoiding a nasty thundering herd problem when there are lots of readers waiting for data on a pipe (or, less commonly, lots of writers waiting for a pipe to have space). While this isn't a common occurrence in the traditional "use a pipe as a data transport" case, where you typically only have a single reader and a single writer process, there is one common special case: using a pipe as a source of "locking tokens" rather than for data communication. In particular, the GNU make jobserver code ends up using a pipe as a way to limit parallelism, where each job consumes a token by reading a byte from the jobserver pipe, and releases the token by writing a byte back to the pipe. This pattern is fairly traditional on Unix, and works very well, but will waste a lot of time waking up a lot of processes when only a single reader needs to be woken up when a writer releases a new token. A simplified test-case of just this pipe interaction is to create 64 processes, and then pass a single token around between them (this test-case also intentionally passes another token that gets ignored to test the "wake up next" logic too, in case anybody wonders about it): #include <unistd.h> int main(int argc, char **argv) { int fd[2], counters[2]; pipe(fd); counters[0] = 0; counters[1] = -1; write(fd[1], counters, sizeof(counters)); /* 64 processes */ fork(); fork(); fork(); fork(); fork(); fork(); do { int i; read(fd[0], &i, sizeof(i)); if (i < 0) continue; counters[0] = i+1; write(fd[1], counters, (1+(i & 1)) *sizeof(int)); } while (counters[0] < 1000000); return 0; } and in a perfect world, passing that token around should only cause one context switch per transfer, when the writer of a token causes a directed wakeup of just a single reader. But with the "writer wakes all readers" model we traditionally had, on my test box the above case causes more than an order of magnitude more scheduling: instead of the expected ~1M context switches, "perf stat" shows 231,852.37 msec task-clock # 15.857 CPUs utilized 11,250,961 context-switches # 0.049 M/sec 616,304 cpu-migrations # 0.003 M/sec 1,648 page-faults # 0.007 K/sec 1,097,903,998,514 cycles # 4.735 GHz 120,781,778,352 instructions # 0.11 insn per cycle 27,997,056,043 branches # 120.754 M/sec 283,581,233 branch-misses # 1.01% of all branches 14.621273891 seconds time elapsed 0.018243000 seconds user 3.611468000 seconds sys before this commit. After this commit, I get 5,229.55 msec task-clock # 3.072 CPUs utilized 1,212,233 context-switches # 0.232 M/sec 103,951 cpu-migrations # 0.020 M/sec 1,328 page-faults # 0.254 K/sec 21,307,456,166 cycles # 4.074 GHz 12,947,819,999 instructions # 0.61 insn per cycle 2,881,985,678 branches # 551.096 M/sec 64,267,015 branch-misses # 2.23% of all branches 1.702148350 seconds time elapsed 0.004868000 seconds user 0.110786000 seconds sys instead. Much better. [ Note! This kernel improvement seems to be very good at triggering a race condition in the make jobserver (in GNU make 4.2.1) for me. It's a long known bug that was fixed back in June 2017 by GNU make commit b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to avoid hangs."). But there wasn't a new release of GNU make until 4.3 on Jan 19 2020, so a number of distributions may still have the buggy version. Some have backported the fix to their 4.2.1 release, though, and even without the fix it's quite timing-dependent whether the bug actually is hit. ] Josh Triplett says: "I've been hammering on your pipe fix patch (switching to exclusive wait queues) for a month or so, on several different systems, and I've run into no issues with it. The patch *substantially* improves parallel build times on large (~100 CPU) systems, both with parallel make and with other things that use make's pipe-based jobserver. All current distributions (including stable and long-term stable distributions) have versions of GNU make that no longer have the jobserver bug" Tested-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-08pipe: remove 'waiting_writers' merging logicLinus Torvalds1-17/+4
This code is ancient, and goes back to when we only had a single page for the pipe buffers. The exact history is hidden in the mists of time (ie "before git", and in fact predates the BK repository too). At that long-ago point in time, it actually helped to try to merge big back-and-forth pipe reads and writes, and not limit pipe reads to the single pipe buffer in length just because that was all we had at a time. However, since then we've expanded the pipe buffers to multiple pages, and this logic really doesn't seem to make sense. And a lot of it is somewhat questionable (ie "hmm, the user asked for a non-blocking read, but we see that there's a writer pending, so let's wait anyway to get the extra data that the writer will have"). But more importantly, it makes the "go to sleep" logic much less obvious, and considering the wakeup issues we've had, I want to make for less of those kinds of things. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-06pipe: fix incorrect caching of pipe state over pipe_wait()Linus Torvalds1-4/+6
Similarly to commit 8f868d68d335 ("pipe: Fix missing mask update after pipe_wait()") this fixes a case where the pipe rewrite ended up caching the pipe state incorrectly over a pipe lock drop event. It wasn't quite as obvious, because you needed to splice data from a pipe to a file, which is a fairly unusual operation, but it's completely wrong. Make sure we load the pipe head/tail/size information only after we've waited for there to be data in the pipe. While in that file, also make one of the splice helper functions use the canonical arghument order for pipe_empty(). That's syntactic - pipe emptiness is just that head and tail are equal, and thus mixing up head and tail doesn't really matter. It's still wrong, though. Reported-by: David Sterba <dsterba@suse.cz> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01Merge tag 'notifications-pipe-prep-20191115' of ↵Linus Torvalds1-77/+120
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull pipe rework from David Howells: "This is my set of preparatory patches for building a general notification queue on top of pipes. It makes a number of significant changes: - It removes the nr_exclusive argument from __wake_up_sync_key() as this is always 1. This prepares for the next step: - Adds wake_up_interruptible_sync_poll_locked() so that poll can be woken up from a function that's holding the poll waitqueue spinlock. - Change the pipe buffer ring to be managed in terms of unbounded head and tail indices rather than bounded index and length. This means that reading the pipe only needs to modify one index, not two. - A selection of helper functions are provided to query the state of the pipe buffer, plus a couple to apply updates to the pipe indices. - The pipe ring is allowed to have kernel-reserved slots. This allows many notification messages to be spliced in by the kernel without allowing userspace to pin too many pages if it writes to the same pipe. - Advance the head and tail indices inside the pipe waitqueue lock and use wake_up_interruptible_sync_poll_locked() to poke poll without having to take the lock twice. - Rearrange pipe_write() to preallocate the buffer it is going to write into and then drop the spinlock. This allows kernel notifications to then be added the ring whilst it is filling the buffer it allocated. The read side is stalled because the pipe mutex is still held. - Don't wake up readers on a pipe if there was already data in it when we added more. - Don't wake up writers on a pipe if the ring wasn't full before we removed a buffer" * tag 'notifications-pipe-prep-20191115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: pipe: Remove sync on wake_ups pipe: Increase the writer-wakeup threshold to reduce context-switch count pipe: Check for ring full inside of the spinlock in pipe_write() pipe: Remove redundant wakeup from pipe_write() pipe: Rearrange sequence in pipe_write() to preallocate slot pipe: Conditionalise wakeup in pipe_read() pipe: Advance tail pointer inside of wait spinlock in pipe_read() pipe: Allow pipes to have kernel-reserved slots pipe: Use head and tail pointers for the ring, not cursor and length Add wake_up_interruptible_sync_poll_locked() Remove the nr_exclusive argument from __wake_up_sync_key() pipe: Reduce #inclusion of pipe_fs_i.h
2019-11-15pipe: Allow pipes to have kernel-reserved slotsDavid Howells1-13/+13
Split pipe->ring_size into two numbers: (1) pipe->ring_size - indicates the hard size of the pipe ring. (2) pipe->max_usage - indicates the maximum number of pipe ring slots that userspace orchestrated events can fill. This allows for a pipe that is both writable by the general kernel notification facility and by userspace, allowing plenty of ring space for notifications to be added whilst preventing userspace from being able to pin too much unswappable kernel space. Signed-off-by: David Howells <dhowells@redhat.com>
2019-10-31pipe: Use head and tail pointers for the ring, not cursor and lengthDavid Howells1-73/+117
Convert pipes to use head and tail pointers for the buffer ring rather than pointer and length as the latter requires two atomic ops to update (or a combined op) whereas the former only requires one. (1) The head pointer is the point at which production occurs and points to the slot in which the next buffer will be placed. This is equivalent to pipe->curbuf + pipe->nrbufs. The head pointer belongs to the write-side. (2) The tail pointer is the point at which consumption occurs. It points to the next slot to be consumed. This is equivalent to pipe->curbuf. The tail pointer belongs to the read-side. (3) head and tail are allowed to run to UINT_MAX and wrap naturally. They are only masked off when the array is being accessed, e.g.: pipe->bufs[head & mask] This means that it is not necessary to have a dead slot in the ring as head == tail isn't ambiguous. (4) The ring is empty if "head == tail". A helper, pipe_empty(), is provided for this. (5) The occupancy of the ring is "head - tail". A helper, pipe_occupancy(), is provided for this. (6) The number of free slots in the ring is "pipe->ring_size - occupancy". A helper, pipe_space_for_user() is provided to indicate how many slots userspace may use. (7) The ring is full if "head - tail >= pipe->ring_size". A helper, pipe_full(), is provided for this. Signed-off-by: David Howells <dhowells@redhat.com>
2019-10-15splice: only read in as much information as there is pipe buffer spaceDarrick J. Wong1-3/+11
Andreas Grünbacher reports that on the two filesystems that support iomap directio, it's possible for splice() to return -EAGAIN (instead of a short splice) if the pipe being written to has less space available in its pipe buffers than the length supplied by the calling process. Months ago we fixed splice_direct_to_actor to clamp the length of the read request to the size of the splice pipe. Do the same to do_splice. Fixes: 17614445576b6 ("splice: don't read more than available pipe space") Reported-by: syzbot+3c01db6025f26530cf8d@syzkaller.appspotmail.com Reported-by: Andreas Grünbacher <andreas.gruenbacher@gmail.com> Reviewed-by: Andreas Grünbacher <andreas.gruenbacher@gmail.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-01uio: make import_iovec()/compat_import_iovec() return bytes on successJens Axboe1-4/+4
Currently these functions return < 0 on error, and 0 for success. Change that so that we return < 0 on error, but number of bytes for success. Some callers already treat the return value that way, others need a slight tweak. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-26Merge tag 'trace-v5.1-rc6' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Three tracing fixes: - Use "nosteal" for ring buffer splice pages - Memory leak fix in error path of trace_pid_write() - Fix preempt_enable_no_resched() (use preempt_enable()) in ring buffer code" * tag 'trace-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: trace: Fix preempt_enable_no_resched() abuse tracing: Fix a memory leak by early error exit in trace_pid_write() tracing: Fix buffer_ref pipe ops
2019-04-26tracing: Fix buffer_ref pipe opsJann Horn1-2/+2
This fixes multiple issues in buffer_pipe_buf_ops: - The ->steal() handler must not return zero unless the pipe buffer has the only reference to the page. But generic_pipe_buf_steal() assumes that every reference to the pipe is tracked by the page's refcount, which isn't true for these buffers - buffer_pipe_buf_get(), which duplicates a buffer, doesn't touch the page's refcount. Fix it by using generic_pipe_buf_nosteal(), which refuses every attempted theft. It should be easy to actually support ->steal, but the only current users of pipe_buf_steal() are the virtio console and FUSE, and they also only use it as an optimization. So it's probably not worth the effort. - The ->get() and ->release() handlers can be invoked concurrently on pipe buffers backed by the same struct buffer_ref. Make them safe against concurrency by using refcount_t. - The pointers stored in ->private were only zeroed out when the last reference to the buffer_ref was dropped. As far as I know, this shouldn't be necessary anyway, but if we do it, let's always do it. Link: http://lkml.kernel.org/r/20190404215925.253531-1-jannh@google.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Fixes: 73a757e63114d ("ring-buffer: Return reader page back into existing ring buffer") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-15Merge branch 'page-refs' (page ref overflow)Linus Torvalds1-2/+10
Merge page ref overflow branch. Jann Horn reported that he can overflow the page ref count with sufficient memory (and a filesystem that is intentionally extremely slow). Admittedly it's not exactly easy. To have more than four billion references to a page requires a minimum of 32GB of kernel memory just for the pointers to the pages, much less any metadata to keep track of those pointers. Jann needed a total of 140GB of memory and a specially crafted filesystem that leaves all reads pending (in order to not ever free the page references and just keep adding more). Still, we have a fairly straightforward way to limit the two obvious user-controllable sources of page references: direct-IO like page references gotten through get_user_pages(), and the splice pipe page duplication. So let's just do that. * branch page-refs: fs: prevent page refcount overflow in pipe_buf_get mm: prevent get_user_pages() from overflowing page refcount mm: add 'try_get_page()' helper function mm: make page ref count overflow check tighter and more explicit
2019-04-14fs: prevent page refcount overflow in pipe_buf_getMatthew Wilcox1-2/+10
Change pipe_buf_get() to return a bool indicating whether it succeeded in raising the refcount of the page (if the thing in the pipe is a page). This removes another mechanism for overflowing the page refcount. All callers converted to handle a failure. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12Merge branch 'work.misc' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted fixes (really no common topic here)" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Make __vfs_write() static vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1 pipe: stop using ->can_merge splice: don't merge into linked buffers fs: move generic stat response attr handling to vfs_getattr_nosec orangefs: don't reinitialize result_mask in ->getattr fs/devpts: always delete dcache dentry-s in dput()
2019-03-05fs: Make splice() and tee() take into account O_NONBLOCK flag on pipesSlavomir Kaslev1-0/+12
The current implementation of splice() and tee() ignores O_NONBLOCK set on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag for blocking on pipe arguments. This is inconsistent since splice()-ing from/to non-pipe file descriptors does take O_NONBLOCK into consideration. Fix this by promoting O_NONBLOCK, when set on a pipe, to SPLICE_F_NONBLOCK. Some context for how the current implementation of splice() leads to inconsistent behavior. In the ongoing work[1] to add VM tracing capability to trace-cmd we stream tracing data over named FIFOs or vsockets from guests back to the host. When we receive SIGINT from user to stop tracing, we set O_NONBLOCK on the input file descriptor and set SPLICE_F_NONBLOCK for the next call to splice(). If splice() was blocked waiting on data from the input FIFO, after SIGINT splice() restarts with the same arguments (no SPLICE_F_NONBLOCK) and blocks again instead of returning -EAGAIN when no data is available. This differs from the splice() behavior when reading from a vsocket or when we're doing a traditional read()/write() loop (trace-cmd's --nosplice argument). With this patch applied we get the same behavior in all situations after setting O_NONBLOCK which also matches the behavior of doing a read()/write() loop instead of splice(). This change does have potential of breaking users who don't expect EAGAIN from splice() when SPLICE_F_NONBLOCK is not set. OTOH programs that set O_NONBLOCK and don't anticipate EAGAIN are arguably buggy[2]. [1] https://github.com/skaslev/trace-cmd/tree/vsock [2] https://github.com/torvalds/linux/blob/d47e3da1759230e394096fd742aad423c291ba48/fs/read_write.c#L1425 Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-04get rid of legacy 'get_ds()' functionLinus Torvalds1-1/+1
Every in-kernel use of this function defined it to KERNEL_DS (either as an actual define, or as an inline function). It's an entirely historical artifact, and long long long ago used to actually read the segment selector valueof '%ds' on x86. Which in the kernel is always KERNEL_DS. Inspired by a patch from Jann Horn that just did this for a very small subset of users (the ones in fs/), along with Al who suggested a script. I then just took it to the logical extreme and removed all the remaining gunk. Roughly scripted with git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/' git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d' plus manual fixups to remove a few unusual usage patterns, the couple of inline function cases and to fix up a comment that had become stale. The 'get_ds()' function remains in an x86 kvm selftest, since in user space it actually does something relevant. Inspired-by: Jann Horn <jannh@google.com> Inspired-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-01pipe: stop using ->can_mergeJann Horn1-4/+0
Al Viro pointed out that since there is only one pipe buffer type to which new data can be appended, it isn't necessary to have a ->can_merge field in struct pipe_buf_operations, we can just check for a magic type. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-01splice: don't merge into linked buffersJann Horn1-0/+4
Before this patch, it was possible for two pipes to affect each other after data had been transferred between them with tee(): ============ $ cat tee_test.c int main(void) { int pipe_a[2]; if (pipe(pipe_a)) err(1, "pipe"); int pipe_b[2]; if (pipe(pipe_b)) err(1, "pipe"); if (write(pipe_a[1], "abcd", 4) != 4) err(1, "write"); if (tee(pipe_a[0], pipe_b[1], 2, 0) != 2) err(1, "tee"); if (write(pipe_b[1], "xx", 2) != 2) err(1, "write"); char buf[5]; if (read(pipe_a[0], buf, 4) != 4) err(1, "read"); buf[4] = 0; printf("got back: '%s'\n", buf); } $ gcc -o tee_test tee_test.c $ ./tee_test got back: 'abxx' $ ============ As suggested by Al Viro, fix it by creating a separate type for non-mergeable pipe buffers, then changing the types of buffers in splice_pipe_to_pipe() and link_pipe(). Cc: <stable@vger.kernel.org> Fixes: 7c77f0b3f920 ("splice: implement pipe to pipe splicing") Fixes: 70524490ee2e ("[PATCH] splice: add support for sys_tee()") Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-12-04splice: don't read more than available pipe spaceDarrick J. Wong1-1/+6
In commit 4721a601099, we tried to fix a problem wherein directio reads into a splice pipe will bounce EFAULT/EAGAIN all the way out to userspace by simulating a zero-byte short read. This happens because some directio read implementations (xfs) will call bio_iov_iter_get_pages to grab pipe buffer pages and issue asynchronous reads, but as soon as we run out of pipe buffers that _get_pages call returns EFAULT, which the splice code translates to EAGAIN and bounces out to userspace. In that commit, the iomap code catches the EFAULT and simulates a zero-byte read, but that causes assertion errors on regular splice reads because xfs doesn't allow short directio reads. The brokenness is compounded by splice_direct_to_actor immediately bailing on do_splice_to returning <= 0 without ever calling ->actor (which empties out the pipe), so if userspace calls back we'll EFAULT again on the full pipe, and nothing ever gets copied. Therefore, teach splice_direct_to_actor to clamp its requests to the amount of free space in the pipe and remove the simulated short read from the iomap directio code. Fixes: 4721a601099 ("iomap: dio data corruption and spurious errors when pipes fill") Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Ranted-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-10-24iov_iter: Separate type from direction and use accessor functionsDavid Howells1-4/+3
In the iov_iter struct, separate the iterator type from the iterator direction and use accessor functions to access them in most places. Convert a bunch of places to use switch-statements to access them rather then chains of bitwise-AND statements. This makes it easier to add further iterator types. Also, this can be more efficient as to implement a switch of small contiguous integers, the compiler can use ~50% fewer compare instructions than it has to use bitwise-and instructions. Further, cease passing the iterator type into the iterator setup function. The iterator function can set that itself. Only the direction is required. Signed-off-by: David Howells <dhowells@redhat.com>