summaryrefslogtreecommitdiff
path: root/fs/udf/udf_i.h
AgeCommit message (Collapse)AuthorFilesLines
2023-01-09udf: Preserve link count of system filesJan Kara1-1/+2
System files in UDF filesystem have link count 0. To not confuse VFS we fudge the link count to be 1 when reading such inodes however we forget to restore the link count of 0 when writing such inodes. Fix that. CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2020-09-29udf: Remove pointless union in udf_inode_infoJan Kara1-5/+1
We use only a single member out of the i_ext union in udf_inode_info. Just remove the pointless union. Signed-off-by: Jan Kara <jack@suse.cz>
2019-08-27udf: augment UDF permissions on new inodesSteven J. Magnani1-0/+1
Windows presents files created within Linux as read-only, even when permissions in Linux indicate the file should be writable. UDF defines a slightly different set of basic file permissions than Linux. Specifically, UDF has "delete" and "change attribute" permissions for each access class (user/group/other). Linux has no equivalents for these. When the Linux UDF driver creates a file (or directory), no UDF delete or change attribute permissions are granted. The lack of delete permission appears to cause Windows to mark an item read-only when its permissions otherwise indicate that it should be read-write. Fix this by having UDF delete permissions track Linux write permissions. Also grant UDF change attribute permission to the owner when creating a new inode. Reported by: Ty Young Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Link: https://lore.kernel.org/r/20190827121359.9954-1-steve@digidescorp.com Signed-off-by: Jan Kara <jack@suse.cz>
2019-08-26udf: reduce leakage of blocks related to named streamsSteven J. Magnani1-1/+4
Windows is capable of creating UDF files having named streams. One example is the "Zone.Identifier" stream attached automatically to files downloaded from a network. See: https://msdn.microsoft.com/en-us/library/dn392609.aspx Modification of a file having one or more named streams in Linux causes the stream directory to become detached from the file, essentially leaking all blocks pertaining to the file's streams. Fix by saving off information about an inode's streams when reading it, for later use when its on-disk data is updated. Link: https://lore.kernel.org/r/20190814125002.10869-1-steve@digidescorp.com Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-27udf: convert inode stamps to timespec64Arnd Bergmann1-1/+1
The VFS structures are finally converted to always use 64-bit timestamps, and this file system can represent a long range of on-disk timestamps already, so now let's fit in the missing bits for udf. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Kara <jack@suse.cz>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-24fs: cleanup slight list_entry abuseRasmus Villemoes1-1/+1
list_entry is just a wrapper for container_of, but it is arguably wrong (and slightly confusing) to use it when the pointed-to struct member is not a struct list_head. Use container_of directly instead. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-22udf: add extent cache support in case of file readingNamjae Jeon1-0/+16
This patch implements extent caching in case of file reading. While reading a file, currently, UDF reads metadata serially which takes a lot of time depending on the number of extents present in the file. Caching last accessd extent improves metadata read time. Instead of reading file metadata from start, now we read from the cached extent. This patch considerably improves the time spent by CPU in kernel mode. For example, while reading a 10.9 GB file using dd: Time before applying patch: 11677022208 bytes (10.9GB) copied, 1529.748921 seconds, 7.3MB/s real 25m 29.85s user 0m 12.41s sys 15m 34.75s Time after applying patch: 11677022208 bytes (10.9GB) copied, 1469.338231 seconds, 7.6MB/s real 24m 29.44s user 0m 15.73s sys 3m 27.61s [JK: Fix bh refcounting issues, simplify initialization] Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: Bonggil Bak <bgbak@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-03-01udf: Init/maintain file entry checkpoint fieldSteve Nickel1-0/+1
In accordance with ECMA 1.67 Part 4, 14.9.15, the checkpoint field should be initialized to 1 at creation. (Zero is *not* a valid value.) Signed-off-by: Steven P. Nickel <snickel@focusinfo.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06udf: Replace bkl with the UDF_I(inode)->i_data_sem for protect ↵Alessio Igor Bogani1-0/+13
udf_inode_info struct Replace bkl with the UDF_I(inode)->i_data_sem rw semaphore in udf_release_file(), udf_symlink(), udf_symlink_filler(), udf_get_block(), udf_block_map(), and udf_setattr(). The rule now is that any operation on regular file's or symlink's extents (or generally allocation information including goal block) needs to hold i_data_sem. This work was supported by a hardware donation from the CE Linux Forum. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02Remove struct typedefs from fs/udf/ecma_167.h et al.Pekka Enberg1-3/+3
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: replace udf_*_offset macros with functionsmarcin.slusarz@gmail.com1-2/+2
- translate udf_file_entry_alloc_offset macro into function - translate udf_ext0_offset macro into function - add comment about crypticly named fields in struct udf_inode_info Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: move headers out include/linux/Christoph Hellwig1-4/+26
There's really no reason to keep udf headers in include/linux as they're not used by anything but fs/udf/. This patch merges most of include/linux/udf_fs_i.h into fs/udf/udf_i.h, include/linux/udf_fs_sb.h into fs/udf/udf_sb.h and include/linux/udf_fs.h into fs/udf/udfdecl.h. The only thing remaining in include/linux/ is a stub of udf_fs_i.h defining the four user-visible udf ioctls. It's also moved from unifdef-y to headers-y because it can be included unconditionally now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2008-02-08udf: remove UDF_I_* macros and open code themMarcin Slusarz1-16/+0
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22UDF: coding style conversion - lindent fixupsCyrill Gorcunov1-1/+1
This patch fixes up sources after conversion by Lindent. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19UDF: coding style conversion - lindentCyrill Gorcunov1-1/+1
This patch converts UDF coding style to kernel coding style using Lindent. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2005-04-17Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+26
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!