summaryrefslogtreecommitdiff
path: root/fs/vboxsf
AgeCommit message (Collapse)AuthorFilesLines
2023-10-18vboxsf: convert to new timestamp accessorsJeff Layton1-7/+8
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-74-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-28Merge tag 'v6.6-vfs.ctime' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs timestamp updates from Christian Brauner: "This adds VFS support for multi-grain timestamps and converts tmpfs, xfs, ext4, and btrfs to use them. This carries acks from all relevant filesystems. The VFS always uses coarse-grained timestamps when updating the ctime and mtime after a change. This has the benefit of allowing filesystems to optimize away a lot of metadata updates, down to around 1 per jiffy, even when a file is under heavy writes. Unfortunately, this has always been an issue when we're exporting via NFSv3, which relies on timestamps to validate caches. A lot of changes can happen in a jiffy, so timestamps aren't sufficient to help the client decide to invalidate the cache. Even with NFSv4, a lot of exported filesystems don't properly support a change attribute and are subject to the same problems with timestamp granularity. Other applications have similar issues with timestamps (e.g., backup applications). If we were to always use fine-grained timestamps, that would improve the situation, but that becomes rather expensive, as the underlying filesystem would have to log a lot more metadata updates. This introduces fine-grained timestamps that are used when they are actively queried. This uses the 31st bit of the ctime tv_nsec field to indicate that something has queried the inode for the mtime or ctime. When this flag is set, on the next mtime or ctime update, the kernel will fetch a fine-grained timestamp instead of the usual coarse-grained one. As POSIX generally mandates that when the mtime changes, the ctime must also change the kernel always stores normalized ctime values, so only the first 30 bits of the tv_nsec field are ever used. Filesytems can opt into this behavior by setting the FS_MGTIME flag in the fstype. Filesystems that don't set this flag will continue to use coarse-grained timestamps. Various preparatory changes, fixes and cleanups are included: - Fixup all relevant places where POSIX requires updating ctime together with mtime. This is a wide-range of places and all maintainers provided necessary Acks. - Add new accessors for inode->i_ctime directly and change all callers to rely on them. Plain accesses to inode->i_ctime are now gone and it is accordingly rename to inode->__i_ctime and commented as requiring accessors. - Extend generic_fillattr() to pass in a request mask mirroring in a sense the statx() uapi. This allows callers to pass in a request mask to only get a subset of attributes filled in. - Rework timestamp updates so it's possible to drop the @now parameter the update_time() inode operation and associated helpers. - Add inode_update_timestamps() and convert all filesystems to it removing a bunch of open-coding" * tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits) btrfs: convert to multigrain timestamps ext4: switch to multigrain timestamps xfs: switch to multigrain timestamps tmpfs: add support for multigrain timestamps fs: add infrastructure for multigrain timestamps fs: drop the timespec64 argument from update_time xfs: have xfs_vn_update_time gets its own timestamp fat: make fat_update_time get its own timestamp fat: remove i_version handling from fat_update_time ubifs: have ubifs_update_time use inode_update_timestamps btrfs: have it use inode_update_timestamps fs: drop the timespec64 arg from generic_update_time fs: pass the request_mask to generic_fillattr fs: remove silly warning from current_time gfs2: fix timestamp handling on quota inodes fs: rename i_ctime field to __i_ctime selinux: convert to ctime accessor functions security: convert to ctime accessor functions apparmor: convert to ctime accessor functions sunrpc: convert to ctime accessor functions ...
2023-08-09fs: pass the request_mask to generic_fillattrJeff Layton1-1/+1
generic_fillattr just fills in the entire stat struct indiscriminately today, copying data from the inode. There is at least one attribute (STATX_CHANGE_COOKIE) that can have side effects when it is reported, and we're looking at adding more with the addition of multigrain timestamps. Add a request_mask argument to generic_fillattr and have most callers just pass in the value that is passed to getattr. Have other callers (e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of STATX_CHANGE_COOKIE into generic_fillattr. Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-09Merge tag 'hardening-v6.5-rc6' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - Replace remaining open-coded struct_size_t() instance (Gustavo A. R. Silva) - Adjust vboxsf's trailing arrays to be proper flexible arrays * tag 'hardening-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: media: venus: Use struct_size_t() helper in pkt_session_unset_buffers() vboxsf: Use flexible arrays for trailing string member
2023-08-06vfs: get rid of old '->iterate' directory operationLinus Torvalds1-1/+2
All users now just use '->iterate_shared()', which only takes the directory inode lock for reading. Filesystems that never got convered to shared mode now instead use a wrapper that drops the lock, re-takes it in write mode, calls the old function, and then downgrades the lock back to read mode. This way the VFS layer and other callers no longer need to care about filesystems that never got converted to the modern era. The filesystems that use the new wrapper are ceph, coda, exfat, jfs, ntfs, ocfs2, overlayfs, and vboxsf. Honestly, several of them look like they really could just iterate their directories in shared mode and skip the wrapper entirely, but the point of this change is to not change semantics or fix filesystems that haven't been fixed in the last 7+ years, but to finally get rid of the dual iterators. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-07-27vboxsf: Use flexible arrays for trailing string memberKees Cook1-3/+3
The declaration of struct shfl_string used trailing fake flexible arrays for the string member. This was tripping FORTIFY_SOURCE since commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3"). Replace the utf8 and utf16 members with actual flexible arrays, drop the unused ucs2 member, and retriain a 2 byte padding to keep the structure size the same. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Closes: https://lore.kernel.org/lkml/ab3a70e9-60ed-0f13-e3d4-8866eaccc8c1@lwfinger.net/ Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230720151458.never.673-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2023-07-24vboxsf: convert to ctime accessor functionsJeff Layton1-2/+2
In later patches, we're going to change how the inode's ctime field is used. Switch to using accessor functions instead of raw accesses of inode->i_ctime. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230705190309.579783-79-jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-06-28Merge tag 'hardening-v6.5-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "There are three areas of note: A bunch of strlcpy()->strscpy() conversions ended up living in my tree since they were either Acked by maintainers for me to carry, or got ignored for multiple weeks (and were trivial changes). The compiler option '-fstrict-flex-arrays=3' has been enabled globally, and has been in -next for the entire devel cycle. This changes compiler diagnostics (though mainly just -Warray-bounds which is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_ coverage. In other words, there are no new restrictions, just potentially new warnings. Any new FORTIFY warnings we've seen have been fixed (usually in their respective subsystem trees). For more details, see commit df8fc4e934c12b. The under-development compiler attribute __counted_by has been added so that we can start annotating flexible array members with their associated structure member that tracks the count of flexible array elements at run-time. It is possible (likely?) that the exact syntax of the attribute will change before it is finalized, but GCC and Clang are working together to sort it out. Any changes can be made to the macro while we continue to add annotations. As an example of that last case, I have a treewide commit waiting with such annotations found via Coccinelle: https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b Also see commit dd06e72e68bcb4 for more details. Summary: - Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko) - Convert strreplace() to return string start (Andy Shevchenko) - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook) - Add missing function prototypes seen with W=1 (Arnd Bergmann) - Fix strscpy() kerndoc typo (Arne Welzel) - Replace strlcpy() with strscpy() across many subsystems which were either Acked by respective maintainers or were trivial changes that went ignored for multiple weeks (Azeem Shaikh) - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers) - Add KUnit tests for strcat()-family - Enable KUnit tests of FORTIFY wrappers under UML - Add more complete FORTIFY protections for strlcat() - Add missed disabling of FORTIFY for all arch purgatories. - Enable -fstrict-flex-arrays=3 globally - Tightening UBSAN_BOUNDS when using GCC - Improve checkpatch to check for strcpy, strncpy, and fake flex arrays - Improve use of const variables in FORTIFY - Add requested struct_size_t() helper for types not pointers - Add __counted_by macro for annotating flexible array size members" * tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits) netfilter: ipset: Replace strlcpy with strscpy uml: Replace strlcpy with strscpy um: Use HOST_DIR for mrproper kallsyms: Replace all non-returning strlcpy with strscpy sh: Replace all non-returning strlcpy with strscpy of/flattree: Replace all non-returning strlcpy with strscpy sparc64: Replace all non-returning strlcpy with strscpy Hexagon: Replace all non-returning strlcpy with strscpy kobject: Use return value of strreplace() lib/string_helpers: Change returned value of the strreplace() jbd2: Avoid printing outside the boundary of the buffer checkpatch: Check for 0-length and 1-element arrays riscv/purgatory: Do not use fortified string functions s390/purgatory: Do not use fortified string functions x86/purgatory: Do not use fortified string functions acpi: Replace struct acpi_table_slit 1-element array with flex-array clocksource: Replace all non-returning strlcpy with strscpy string: use __builtin_memcpy() in strlcpy/strlcat staging: most: Replace all non-returning strlcpy with strscpy drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy ...
2023-05-24splice: Use filemap_splice_read() instead of generic_file_splice_read()David Howells1-1/+1
Replace pointers to generic_file_splice_read() with calls to filemap_splice_read(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> cc: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-22vboxsf: Replace all non-returning strlcpy with strscpyAzeem Shaikh1-1/+1
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230510211146.3486600-1-azeemshaikh38@gmail.com
2023-01-19fs: port ->rename() to pass mnt_idmapChristian Brauner1-1/+1
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->mkdir() to pass mnt_idmapChristian Brauner1-1/+1
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->symlink() to pass mnt_idmapChristian Brauner1-1/+1
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->create() to pass mnt_idmapChristian Brauner1-1/+1
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->getattr() to pass mnt_idmapChristian Brauner2-3/+3
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->setattr() to pass mnt_idmapChristian Brauner2-2/+2
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-05-09vboxsf: Convert vboxsf to read_folioMatthew Wilcox (Oracle)1-2/+3
This is a "weak" conversion which converts straight back to using pages. A full conversion should be performed at some point, hopefully by someone familiar with the filesystem. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-03-23Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds1-1/+1
Pull filesystem folio updates from Matthew Wilcox: "Primarily this series converts some of the address_space operations to take a folio instead of a page. Notably: - a_ops->is_partially_uptodate() takes a folio instead of a page and changes the type of the 'from' and 'count' arguments to make it obvious they're bytes. - a_ops->invalidatepage() becomes ->invalidate_folio() and has a similar type change. - a_ops->launder_page() becomes ->launder_folio() - a_ops->set_page_dirty() becomes ->dirty_folio() and adds the address_space as an argument. There are a couple of other misc changes up front that weren't worth separating into their own pull request" * tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits) fs: Remove aops ->set_page_dirty fb_defio: Use noop_dirty_folio() fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio fs: Convert __set_page_dirty_buffers to block_dirty_folio nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio() mm: Convert swap_set_page_dirty() to swap_dirty_folio() ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio() btrfs: Convert extent_range_redirty_for_io() to use folios fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio btrfs: Convert from set_page_dirty to dirty_folio fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio() fs: Add aops->dirty_folio fs: Remove aops->launder_page orangefs: Convert launder_page to launder_folio nfs: Convert from launder_page to launder_folio fuse: Convert from launder_page to launder_folio ...
2022-03-23Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds1-0/+1
Pull folio updates from Matthew Wilcox: - Rewrite how munlock works to massively reduce the contention on i_mmap_rwsem (Hugh Dickins): https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/ - Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig): https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/ - Convert GUP to use folios and make pincount available for order-1 pages. (Matthew Wilcox) - Convert a few more truncation functions to use folios (Matthew Wilcox) - Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox) - Convert rmap_walk to use folios (Matthew Wilcox) - Convert most of shrink_page_list() to use a folio (Matthew Wilcox) - Add support for creating large folios in readahead (Matthew Wilcox) * tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits) mm/damon: minor cleanup for damon_pa_young selftests/vm/transhuge-stress: Support file-backed PMD folios mm/filemap: Support VM_HUGEPAGE for file mappings mm/readahead: Switch to page_cache_ra_order mm/readahead: Align file mappings for non-DAX mm/readahead: Add large folio readahead mm: Support arbitrary THP sizes mm: Make large folios depend on THP mm: Fix READ_ONLY_THP warning mm/filemap: Allow large folios to be added to the page cache mm: Turn can_split_huge_page() into can_split_folio() mm/vmscan: Convert pageout() to take a folio mm/vmscan: Turn page_check_references() into folio_check_references() mm/vmscan: Account large folios correctly mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios mm/vmscan: Free non-shmem folios without splitting them mm/rmap: Constify the rmap_walk_control argument mm/rmap: Convert rmap_walk() to take a folio mm: Turn page_anon_vma() into folio_anon_vma() mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read() ...
2022-03-23fs: allocate inode by using alloc_inode_sb()Muchun Song1-1/+1
The inode allocation is supposed to use alloc_inode_sb(), so convert kmem_cache_alloc() of all filesystems to alloc_inode_sb(). Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4] Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-21fs: Move many prototypes to pagemap.hMatthew Wilcox (Oracle)1-0/+1
These functions are page cache functionality and don't need to be declared in fs.h. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
2022-03-15fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folioMatthew Wilcox (Oracle)1-1/+1
These filesystems use __set_page_dirty_nobuffers() either directly or with a very thin wrapper; convert them en masse. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2021-09-27vboxfs: fix broken legacy mount signature checkingLinus Torvalds1-10/+2
Commit 9d682ea6bcc7 ("vboxsf: Fix the check for the old binary mount-arguments struct") was meant to fix a build error due to sign mismatch in 'char' and the use of character constants, but it just moved the error elsewhere, in that on some architectures characters and signed and on others they are unsigned, and that's just how the C standard works. The proper fix is a simple "don't do that then". The code was just being silly and odd, and it should never have cared about signed vs unsigned characters in the first place, since what it is testing is not four "characters", but four bytes. And the way to compare four bytes is by using "memcmp()". Which compilers will know to just turn into a single 32-bit compare with a constant, as long as you don't have crazy debug options enabled. Link: https://lore.kernel.org/lkml/20210927094123.576521-1-arnd@kernel.org/ Cc: Arnd Bergmann <arnd@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-23vboxsf: Add support for the atomic_open directory-inode opHans de Goede1-0/+48
Opening a new file is done in 2 steps on regular filesystems: 1. Call the create inode-op on the parent-dir to create an inode to hold the meta-data related to the file. 2. Call the open file-op to get a handle for the file. vboxsf however does not really use disk-backed inodes because it is based on passing through file-related system-calls through to the hypervisor. So both steps translate to an open(2) call being passed through to the hypervisor. With the handle returned by the first call immediately being closed again. Making 2 open calls for a single open(..., O_CREATE, ...) calls has 2 problems: a) It is not really efficient. b) It actually breaks some apps. An example of b) is doing a git clone inside a vboxsf mount. When git clone tries to create a tempfile to store the pak files which is downloading the following happens: 1. vboxsf_dir_mkfile() gets called with a mode of 0444 and succeeds. 2. vboxsf_file_open() gets called with file->f_flags containing O_RDWR. When the host is a Linux machine this fails because doing a open(..., O_RDWR) on a file which exists and has mode 0444 results in an -EPERM error. Other network-filesystems and fuse avoid the problem of needing to pass 2 open() calls to the other side by using the atomic_open directory-inode op. This commit fixes git clone not working inside a vboxsf mount, by adding support for the atomic_open directory-inode op. As an added bonus this should also make opening new files faster. The atomic_open implementation is modelled after the atomic_open implementations from the 9p and fuse code. Fixes: 0fd169576648 ("fs: Add VirtualBox guest shared folder (vboxsf) support") Reported-by: Ludovic Pouzenc <bugreports@pouzenc.fr> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-23vboxsf: Add vboxsf_[create|release]_sf_handle() helpersHans de Goede2-27/+51
Factor out the code to create / release a struct vboxsf_handle into 2 new helper functions. This is a preparation patch for adding atomic_open support. Fixes: 0fd169576648 ("fs: Add VirtualBox guest shared folder (vboxsf) support") Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-23vboxsf: Make vboxsf_dir_create() return the handle for the created fileHans de Goede1-7/+11
Make vboxsf_dir_create() optionally return the vboxsf-handle for the created file. This is a preparation patch for adding atomic_open support. Fixes: 0fd169576648 ("fs: Add VirtualBox guest shared folder (vboxsf) support") Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-23vboxsf: Honor excl flag to the dir-inode create opHans de Goede1-7/+9
Honor the excl flag to the dir-inode create op, instead of behaving as if it is always set. Note the old behavior still worked most of the time since a non-exclusive open only calls the create op, if there is a race and the file is created between the dentry lookup and the calling of the create call. While at it change the type of the is_dir parameter to the vboxsf_dir_create() helper from an int to a bool, to be consistent with the use of bool for the excl parameter. Fixes: 0fd169576648 ("fs: Add VirtualBox guest shared folder (vboxsf) support") Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-03-13vboxsf: don't allow to change the inode typeAl Viro4-31/+49
vboxsf_init_inode() is used both for initial setup of inode and for metadata updates. Tell it whether we are updating a live inode or setting up a new instance and have it refuse to change type in the former case. [fixed the braino caught by Hans de Goede <hdegoede@redhat.com>] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-24fs: make helpers idmap mount awareChristian Brauner3-10/+17
Extend some inode methods with an additional user namespace argument. A filesystem that is aware of idmapped mounts will receive the user namespace the mount has been marked with. This can be used for additional permission checking and also to enable filesystems to translate between uids and gids if they need to. We have implemented all relevant helpers in earlier patches. As requested we simply extend the exisiting inode method instead of introducing new ones. This is a little more code churn but it's mostly mechanical and doesnt't leave us with additional inode methods. Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24stat: handle idmapped mountsChristian Brauner1-1/+1
The generic_fillattr() helper fills in the basic attributes associated with an inode. Enable it to handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace before we store the uid and gid. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-10-16Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "The latest advances in computer science from the trivial queue" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: xtensa: fix Kconfig typo spelling.txt: Remove some duplicate entries mtd: rawnand: oxnas: cleanup/simplify code selftests: vm: add fragment CONFIG_GUP_BENCHMARK perf: Fix opt help text for --no-bpf-event HID: logitech-dj: Fix spelling in comment bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG MAINTAINERS: rectify MMP SUPPORT after moving cputype.h scif: Fix spelling of EACCES printk: fix global comment lib/bitmap.c: fix spello fs: Fix missing 'bit' in comment
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+2
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-09-24bdi: initialize ->ra_pages and ->io_pages in bdi_initChristoph Hellwig1-0/+2
Set up a readahead size by default, as very few users have a good reason to change it. This means code, ecryptfs, and orangefs now set up the values while they were previously missing it, while ubifs, mtd and vboxsf manually set it to 0 to avoid readahead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Richard Weinberger <richard@nod.at> [ubifs, mtd] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull vfs fixes from Al Viro: "No common topic, just assorted fixes" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse: fix the ->direct_IO() treatment of iov_iter fs: fix cast in fsparam_u32hex() macro vboxsf: Fix the check for the old binary mount-arguments struct
2020-09-01Merge branch 'master' into for-nextJiri Kosina2-2/+2
Sync with Linus' branch in order to be able to apply fixups of more recent patches.
2020-08-25vboxsf: Fix the check for the old binary mount-arguments structHans de Goede1-1/+1
Fix the check for the mainline vboxsf code being used with the old mount.vboxsf mount binary from the out-of-tree vboxsf version doing a comparison between signed and unsigned data types. This fixes the following smatch warnings: fs/vboxsf/super.c:390 vboxsf_parse_monolithic() warn: impossible condition '(options[1] == (255)) => ((-128)-127 == 255)' fs/vboxsf/super.c:391 vboxsf_parse_monolithic() warn: impossible condition '(options[2] == (254)) => ((-128)-127 == 254)' fs/vboxsf/super.c:392 vboxsf_parse_monolithic() warn: impossible condition '(options[3] == (253)) => ((-128)-127 == 253)' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-05-18fs: Fix missing 'bit' in commentChucheng Luo1-1/+1
The missing word may make it hard for other developers to understand it. Signed-off-by: Chucheng Luo <luochucheng@vivo.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-07vboxsf: don't use the source name in the bdi nameChristoph Hellwig1-1/+1
Simplify the bdi name to mirror what we are doing elsewhere, and drop them name in favor of just using a number. This avoids a potentially very long bdi name. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-09fs: Add VirtualBox guest shared folder (vboxsf) supportHans de Goede9-0/+3272
VirtualBox hosts can share folders with guests, this commit adds a VFS driver implementing the Linux-guest side of this, allowing folders exported by the host to be mounted under Linux. This driver depends on the guest <-> host IPC functions exported by the vboxguest driver. Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>