Age | Commit message (Collapse) | Author | Files | Lines |
|
commit 80f6e3080bfcf865062a926817b3ca6c4a137a57 upstream.
If the file size is almost S64_MAX, the calculated number of Merkle tree
levels exceeds FS_VERITY_MAX_LEVELS, causing FS_IOC_ENABLE_VERITY to
fail. This is unintentional, since as the comment above the definition
of FS_VERITY_MAX_LEVELS states, it is enough for over U64_MAX bytes of
data using SHA-256 and 4K blocks. (Specifically, 4096*128**8 >= 2**64.)
The bug is actually that when the number of blocks in the first level is
calculated from i_size, there is a signed integer overflow due to i_size
being signed. Fix this by treating i_size as unsigned.
This was found by the new test "generic: test fs-verity EFBIG scenarios"
(https://lkml.kernel.org/r/b1d116cd4d0ea74b9cd86f349c672021e005a75c.1631558495.git.boris@bur.io).
This didn't affect ext4 or f2fs since those have a smaller maximum file
size, but it did affect btrfs which allows files up to S64_MAX bytes.
Reported-by: Boris Burkov <boris@bur.io>
Fixes: 3fda4c617e84 ("fs-verity: implement FS_IOC_ENABLE_VERITY ioctl")
Fixes: fd2d1acfcadf ("fs-verity: add the hook for file ->open()")
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Boris Burkov <boris@bur.io>
Link: https://lore.kernel.org/r/20210916203424.113376-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Normally smp_store_release() or cmpxchg_release() is paired with
smp_load_acquire(). Sometimes smp_load_acquire() can be replaced with
the more lightweight READ_ONCE(). However, for this to be safe, all the
published memory must only be accessed in a way that involves the
pointer itself. This may not be the case if allocating the object also
involves initializing a static or global variable, for example.
fsverity_info::tree_params.hash_alg->tfm is a crypto_ahash object that's
internal to and is allocated by the crypto subsystem. So by using
READ_ONCE() for ->i_verity_info, we're relying on internal
implementation details of the crypto subsystem.
Remove this fragile assumption by using smp_load_acquire() instead.
Also fix the cmpxchg logic to correctly execute an ACQUIRE barrier when
losing the cmpxchg race, since cmpxchg doesn't guarantee a memory
barrier on failure.
(Note: I haven't seen any real-world problems here. This change is just
fixing the code to be guaranteed correct and less fragile.)
Fixes: fd2d1acfcadf ("fs-verity: add the hook for file ->open()")
Link: https://lore.kernel.org/r/20200721225920.114347-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Remove the unnecessary 'extern' keywords from function declarations.
This makes it so that we don't have a mix of both styles, so it won't be
ambiguous what to use in new fs-verity patches. This also makes the
code shorter and matches the 'checkpatch --strict' expectation.
Link: https://lore.kernel.org/r/20200511192118.71427-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Fix all kerneldoc warnings in fs/verity/ and include/linux/fsverity.h.
Most of these were due to missing documentation for function parameters.
Detected with:
scripts/kernel-doc -v -none fs/verity/*.{c,h} include/linux/fsverity.h
This cleanup makes it possible to check new patches for kerneldoc
warnings without having to filter out all the existing ones.
Link: https://lore.kernel.org/r/20200511192118.71427-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
<linux/kernel.h> already provides a macro u64_to_user_ptr().
Use it instead of open-coding the two casts.
No change in behavior.
Link: https://lore.kernel.org/r/20191231175408.20524-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
When initializing an fs-verity hash algorithm, also initialize a mempool
that contains a single preallocated hash request object. Then replace
the direct calls to ahash_request_alloc() and ahash_request_free() with
allocating and freeing from this mempool.
This eliminates the possibility of the allocation failing, which is
desirable for the I/O path.
This doesn't cause deadlocks because there's no case where multiple hash
requests are needed at a time to make forward progress.
Link: https://lore.kernel.org/r/20191231175545.20709-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
When fs-verity verifies data pages, currently it reads each Merkle tree
page synchronously using read_mapping_page().
Therefore, when the Merkle tree pages aren't already cached, fs-verity
causes an extra 4 KiB I/O request for every 512 KiB of data (assuming
that the Merkle tree uses SHA-256 and 4 KiB blocks). This results in
more I/O requests and performance loss than is strictly necessary.
Therefore, implement readahead of the Merkle tree pages.
For simplicity, we take advantage of the fact that the kernel already
does readahead of the file's *data*, just like it does for any other
file. Due to this, we don't really need a separate readahead state
(struct file_ra_state) just for the Merkle tree, but rather we just need
to piggy-back on the existing data readahead requests.
We also only really need to bother with the first level of the Merkle
tree, since the usual fan-out factor is 128, so normally over 99% of
Merkle tree I/O requests are for the first level.
Therefore, make fsverity_verify_bio() enable readahead of the first
Merkle tree level, for up to 1/4 the number of pages in the bio, when it
sees that the REQ_RAHEAD flag is set on the bio. The readahead size is
then passed down to ->read_merkle_tree_page() for the filesystem to
(optionally) implement if it sees that the requested page is uncached.
While we're at it, also make build_merkle_tree_level() set the Merkle
tree readahead size, since it's easy to do there.
However, for now don't set the readahead size in fsverity_verify_page(),
since currently it's only used to verify holes on ext4 and f2fs, and it
would need parameters added to know how much to read ahead.
This patch significantly improves fs-verity sequential read performance.
Some quick benchmarks with 'cat'-ing a 250MB file after dropping caches:
On an ARM64 phone (using sha256-ce):
Before: 217 MB/s
After: 263 MB/s
(compare to sha256sum of non-verity file: 357 MB/s)
In an x86_64 VM (using sha256-avx2):
Before: 173 MB/s
After: 215 MB/s
(compare to sha256sum of non-verity file: 223 MB/s)
Link: https://lore.kernel.org/r/20200106205533.137005-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
When it builds the first level of the Merkle tree, FS_IOC_ENABLE_VERITY
sequentially reads each page of the file using read_mapping_page().
This works fine if the file's data is already in pagecache, which should
normally be the case, since this ioctl is normally used immediately
after writing out the file.
But in any other case this implementation performs very poorly, since
only one page is read at a time.
Fix this by implementing readahead using the functions from
mm/readahead.c.
This improves performance in the uncached case by about 20x, as seen in
the following benchmarks done on a 250MB file (on x86_64 with SHA-NI):
FS_IOC_ENABLE_VERITY uncached (before) 3.299s
FS_IOC_ENABLE_VERITY uncached (after) 0.160s
FS_IOC_ENABLE_VERITY cached 0.147s
sha256sum uncached 0.191s
sha256sum cached 0.145s
Note: we could instead switch to kernel_read(). But that would mean
we'd no longer be hashing the data directly from the pagecache, which is
a nice optimization of its own. And using kernel_read() would require
allocating another temporary buffer, hashing the data and tree pages
separately, and explicitly zero-padding the last page -- so it wouldn't
really be any simpler than direct pagecache access, at least for now.
Link: https://lore.kernel.org/r/20200106205410.136707-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
|
|
To meet some users' needs, add optional support for having fs-verity
handle a portion of the authentication policy in the kernel. An
".fs-verity" keyring is created to which X.509 certificates can be
added; then a sysctl 'fs.verity.require_signatures' can be set to cause
the kernel to enforce that all fs-verity files contain a signature of
their file measurement by a key in this keyring.
See the "Built-in signature verification" section of
Documentation/filesystems/fsverity.rst for the full documentation.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add SHA-512 support to fs-verity. This is primarily a demonstration of
the trivial changes needed to support a new hash algorithm in fs-verity;
most users will still use SHA-256, due to the smaller space required to
store the hashes. But some users may prefer SHA-512.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add a function for filesystems to call to implement the
FS_IOC_MEASURE_VERITY ioctl. This ioctl retrieves the file measurement
that fs-verity calculated for the given file and is enforcing for reads;
i.e., reads that don't match this hash will fail. This ioctl can be
used for authentication or logging of file measurements in userspace.
See the "FS_IOC_MEASURE_VERITY" section of
Documentation/filesystems/fsverity.rst for the documentation.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add a function for filesystems to call to implement the
FS_IOC_ENABLE_VERITY ioctl. This ioctl enables fs-verity on a file.
See the "FS_IOC_ENABLE_VERITY" section of
Documentation/filesystems/fsverity.rst for the documentation.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add functions that verify data pages that have been read from a
fs-verity file, against that file's Merkle tree. These will be called
from filesystems' ->readpage() and ->readpages() methods.
Since data verification can block, a workqueue is provided for these
methods to enqueue verification work from their bio completion callback.
See the "Verifying data" section of
Documentation/filesystems/fsverity.rst for more information.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add a function fsverity_prepare_setattr() which filesystems that support
fs-verity must call to deny truncates of verity files.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add the fsverity_file_open() function, which prepares an fs-verity file
to be read from. If not already done, it loads the fs-verity descriptor
from the filesystem and sets up an fsverity_info structure for the inode
which describes the Merkle tree and contains the file measurement. It
also denies all attempts to open verity files for writing.
This commit also begins the include/linux/fsverity.h header, which
declares the interface between fs/verity/ and filesystems.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add the beginnings of the fs/verity/ support layer, including the
Kconfig option and various helper functions for hashing. To start, only
SHA-256 is supported, but other hash algorithms can easily be added.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|