summaryrefslogtreecommitdiff
path: root/fs/xfs/xfs_buf.h
AgeCommit message (Collapse)AuthorFilesLines
2022-07-21xfs: xfs_buf cache destroy isn't RCU safeDave Chinner1-4/+2
Darrick and Sachin Sant reported that xfs/435 and xfs/436 would report an non-empty xfs_buf slab on module remove. This isn't easily to reproduce, but is clearly a side effect of converting the buffer caceh to RUC freeing and lockless lookups. Sachin bisected and Darrick hit it when testing the patchset directly. Turns out that the xfs_buf slab is not destroyed when all the other XFS slab caches are destroyed. Instead, it's got it's own little wrapper function that gets called separately, and so it doesn't have an rcu_barrier() call in it that is needed to drain all the rcu callbacks before the slab is destroyed. Fix it by removing the xfs_buf_init/terminate wrappers that just allocate and destroy the xfs_buf slab, and move them to the same place that all the other slab caches are set up and destroyed. Reported-and-tested-by: Sachin Sant <sachinp@linux.ibm.com> Fixes: 298f34224506 ("xfs: lockless buffer lookup") Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-07-14xfs: lockless buffer lookupDave Chinner1-0/+1
Now that we have a standalone fast path for buffer lookup, we can easily convert it to use rcu lookups. When we continually hammer the buffer cache with trylock lookups, we end up with a huge amount of lock contention on the per-ag buffer hash locks: - 92.71% 0.05% [kernel] [k] xfs_inodegc_worker - 92.67% xfs_inodegc_worker - 92.13% xfs_inode_unlink - 91.52% xfs_inactive_ifree - 85.63% xfs_read_agi - 85.61% xfs_trans_read_buf_map - 85.59% xfs_buf_read_map - xfs_buf_get_map - 85.55% xfs_buf_find - 72.87% _raw_spin_lock - do_raw_spin_lock 71.86% __pv_queued_spin_lock_slowpath - 8.74% xfs_buf_rele - 7.88% _raw_spin_lock - 7.88% do_raw_spin_lock 7.63% __pv_queued_spin_lock_slowpath - 1.70% xfs_buf_trylock - 1.68% down_trylock - 1.41% _raw_spin_lock_irqsave - 1.39% do_raw_spin_lock __pv_queued_spin_lock_slowpath - 0.76% _raw_spin_unlock 0.75% do_raw_spin_unlock This is basically hammering the pag->pag_buf_lock from lots of CPUs doing trylocks at the same time. Most of the buffer trylock operations ultimately fail after we've done the lookup, so we're really hammering the buf hash lock whilst making no progress. We can also see significant spinlock traffic on the same lock just under normal operation when lots of tasks are accessing metadata from the same AG, so let's avoid all this by converting the lookup fast path to leverages the rhashtable's ability to do rcu protected lookups. We avoid races with the buffer release path by using atomic_inc_not_zero() on the buffer hold count. Any buffer that is in the LRU will have a non-zero count, thereby allowing the lockless fast path to be taken in most cache hit situations. If the buffer hold count is zero, then it is likely going through the release path so in that case we fall back to the existing lookup miss slow path. The slow path will then do an atomic lookup and insert under the buffer hash lock and hence serialise correctly against buffer release freeing the buffer. The use of rcu protected lookups means that buffer handles now need to be freed by RCU callbacks (same as inodes). We still free the buffer pages before the RCU callback - we won't be trying to access them at all on a buffer that has zero references - but we need the buffer handle itself to be present for the entire rcu protected read side to detect a zero hold count correctly. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2022-07-07xfs: rework xfs_buf_incore() APIDave Chinner1-4/+16
Make it consistent with the other buffer APIs to return a error and the buffer is placed in a parameter. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2022-04-21xfs: convert buffer flags to unsigned.Dave Chinner1-21/+21
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. This manifests as a compiler error such as: /kisskb/src/fs/xfs/./xfs_trace.h:432:2: note: in expansion of macro 'TP_printk' TP_printk("dev %d:%d daddr 0x%llx bbcount 0x%x hold %d pincount %d " ^ /kisskb/src/fs/xfs/./xfs_trace.h:440:5: note: in expansion of macro '__print_flags' __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), ^ /kisskb/src/fs/xfs/xfs_buf.h:67:4: note: in expansion of macro 'XBF_UNMAPPED' { XBF_UNMAPPED, "UNMAPPED" } ^ /kisskb/src/fs/xfs/./xfs_trace.h:440:40: note: in expansion of macro 'XFS_BUF_FLAGS' __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), ^ /kisskb/src/fs/xfs/./xfs_trace.h: In function 'trace_raw_output_xfs_buf_flags_class': /kisskb/src/fs/xfs/xfs_buf.h:46:23: error: initializer element is not constant #define XBF_UNMAPPED (1 << 31)/* do not map the buffer */ as __print_flags assigns XFS_BUF_FLAGS to a structure that uses an unsigned long for the flag. Since this results in the value of XBF_UNMAPPED causing a signed integer overflow, the result is technically undefined behavior, which gcc-5 does not accept as an integer constant. This is based on a patch from Arnd Bergman <arnd@arndb.de>. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Chandan Babu R <chandan.babu@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2021-12-04dax: return the partition offset from fs_dax_get_by_bdevChristoph Hellwig1-0/+1
Prepare for the removal of the block_device from the DAX I/O path by returning the partition offset from fs_dax_get_by_bdev so that the file systems have it at hand for use during I/O. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20211129102203.2243509-26-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-12-04xfs: move dax device handling into xfs_{alloc,free}_buftargChristoph Hellwig1-2/+2
Hide the DAX device lookup from the xfs_super.c code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20211129102203.2243509-22-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-08-19xfs: rename buffer cache index variable b_bnDave Chinner1-17/+1
To stop external users from using b_bn as the disk address of the buffer, rename it to b_rhash_key to indicate that it is the buffer cache index, not the block number of the buffer. Code that needs the disk address should use xfs_buf_daddr() to obtain it. Do the rename and clean up any of the remaining internal b_bn users. Also clean up any remaining b_bn cruft that is now unused. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19xfs: introduce xfs_buf_daddr()Dave Chinner1-1/+5
Introduce a helper function xfs_buf_daddr() to extract the disk address of the buffer from the struct xfs_buf. This will replace direct accesses to bp->b_bn and bp->b_maps[0].bm_bn, as well as the XFS_BUF_ADDR() macro. This patch introduces the helper function and replaces all uses of XFS_BUF_ADDR() as this is just a simple sed replacement. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19xfs: sb verifier doesn't handle uncached sb bufferDave Chinner1-1/+6
The verifier checks explicitly for bp->b_bn == XFS_SB_DADDR to match the primary superblock buffer, but the primary superblock is an uncached buffer and so bp->b_bn is always -1ULL. Hence this never matches and the CRC error reporting is wholly dependent on the mount superblock already being populated so CRC feature checks pass and allow CRC errors to be reported. Fix this so that the primary superblock CRC error reporting is not dependent on already having read the superblock into memory. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-10xfs: remove kmem_alloc_io()Dave Chinner1-6/+0
Since commit 59bb47985c1d ("mm, sl[aou]b: guarantee natural alignment for kmalloc(power-of-two)"), the core slab code now guarantees slab alignment in all situations sufficient for IO purposes (i.e. minimum of 512 byte alignment of >= 512 byte sized heap allocations) we no longer need the workaround in the XFS code to provide this guarantee. Replace the use of kmem_alloc_io() with kmem_alloc() or kmem_alloc_large() appropriately, and remove the kmem_alloc_io() interface altogether. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-06-07xfs: remove ->b_offset handling for page backed buffersChristoph Hellwig1-1/+2
->b_offset can only be non-zero for _XBF_KMEM backed buffers, so remove all code dealing with it for page backed buffers. Signed-off-by: Christoph Hellwig <hch@lst.de> [dgc: modified to fit this patchset] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-01-23xfs: don't drain buffer lru on freeze and read-only remountBrian Foster1-0/+1
xfs_buftarg_drain() is called from xfs_log_quiesce() to ensure the buffer cache is reclaimed during unmount. xfs_log_quiesce() is also called from xfs_quiesce_attr(), however, which means that cache state is completely drained for filesystem freeze and read-only remount. While technically harmless, this is unnecessarily heavyweight. Both freeze and read-only mounts allow reads and thus allow population of the buffer cache. Therefore, the transitional sequence in either case really only needs to quiesce outstanding writes to return the filesystem in a generally read-only state. Additionally, some users have reported that attempts to freeze a filesystem concurrent with a read-heavy workload causes the freeze process to stall for a significant amount of time. This occurs because, as mentioned above, the read workload repopulates the buffer LRU while the freeze task attempts to drain it. To improve this situation, replace the drain in xfs_log_quiesce() with a buffer I/O quiesce and lift the drain into the unmount path. This removes buffer LRU reclaim from freeze and read-only [re]mount, but ensures the LRU is still drained before the filesystem unmounts. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-01-23xfs: rename xfs_wait_buftarg() to xfs_buftarg_drain()Brian Foster1-5/+5
xfs_wait_buftarg() is vaguely named and somewhat overloaded. Its primary purpose is to reclaim all buffers from the provided buffer target LRU. In preparation to refactor xfs_wait_buftarg() into serialization and LRU draining components, rename the function and associated helpers to something more descriptive. This patch has no functional changes with the minor exception of renaming a tracepoint. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2020-12-17xfs: remove xfs_buf_t typedefDave Chinner1-7/+7
Prepare for kernel xfs_buf alignment by getting rid of the xfs_buf_t typedef from userspace. [darrick: This patch is a port of a userspace patch removing the xfs_buf_t typedef in preparation to make the userspace xfs_buf code behave more like its kernel counterpart.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-09-16xfs: reuse _xfs_buf_read for re-reading the superblockChristoph Hellwig1-8/+1
Instead of poking deeply into buffer cache internals when re-reading the superblock during log recovery just generalize _xfs_buf_read and use it there. Note that we don't have to explicitly set up the ops as they must be set from the initial read. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-09-16xfs: fold xfs_buf_ioend_finish into xfs_ioendChristoph Hellwig1-7/+0
No need to keep a separate helper for this logic. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-09-16xfs: mark xfs_buf_ioend staticChristoph Hellwig1-1/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-07-06xfs: call xfs_buf_iodone directlyDave Chinner1-5/+1
All unmarked dirty buffers should be in the AIL and have log items attached to them. Hence when they are written, we will run a callback to remove the item from the AIL if appropriate. Now that we've handled inode and dquot buffers, all remaining calls are to xfs_buf_iodone() and so we can hard code this rather than use an indirect call. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-07-06xfs: mark log recovery buffers for completionDave Chinner1-0/+2
Log recovery has it's own buffer write completion handler for buffers that it directly recovers. Convert these to direct calls by flagging these buffers as being log recovery buffers. The flag will get cleared by the log recovery IO completion routine, so it will never leak out of log recovery. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-07-06xfs: mark dquot buffers in cacheDave Chinner1-0/+2
dquot buffers always have write IO callbacks, so by marking them directly we can avoid needing to attach ->b_iodone functions to them. This avoids an indirect call, and makes future modifications much simpler. This is largely a rearrangement of the code at this point - no IO completion functionality changes at this point, just how the code is run is modified. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-07-06xfs: mark inode buffers in cacheDave Chinner1-13/+25
Inode buffers always have write IO callbacks, so by marking them directly we can avoid needing to attach ->b_iodone functions to them. This avoids an indirect call, and makes future modifications much simpler. While this is largely a refactor of existing functionality, we broaden the scope of the flag to beyond where inodes are explicitly attached because future changes need to know what type of log items are attached to the buffer. Adding this buffer flag may invoke the inode iodone callback in cases where it wouldn't have been previously, but this is not a functional change because the callback is identical to the normal buffer write iodone callback when inodes are not attached. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-07xfs: refactor ratelimited buffer error messages into helperBrian Foster1-0/+1
XFS has some inconsistent log message rate limiting with respect to buffer alerts. The metadata I/O error notification uses the generic ratelimited alert, the buffer push code uses a custom rate limit and the similar quiesce time failure checks are not rate limited at all (when they should be). The custom rate limit defined in the buf item code is specifically crafted for buffer alerts. It is more aggressive than generic rate limiting code because it must accommodate a high frequency of I/O error events in a relative short timeframe. Factor out the custom rate limit state from the buf item code into a per-buftarg rate limit so various alerts are limited based on the target. Define a buffer alert helper function and use it for the buffer alerts that are already ratelimited. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-07xfs: factor out buffer I/O failure codeBrian Foster1-0/+1
We use the same buffer I/O failure code in a few different places. It's not much code, but it's not necessarily self-explanatory. Factor it into a helper and document it in one place. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-12xfs: add a function to deal with corrupt buffers post-verifiersDarrick J. Wong1-0/+2
Add a helper function to get rid of buffers that we have decided are corrupt after the verifiers have run. This function is intended to handle metadata checks that can't happen in the verifiers, such as inter-block relationship checking. Note that we now mark the buffer stale so that it will not end up on any LRU and will be purged on release. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-01-27xfs: fix xfs_buf_ioerror_alert location reportingDarrick J. Wong1-3/+4
Instead of passing __func__ to the error reporting function, let's use the return address builtins so that the messages actually tell you which higher level function called the buffer functions. This was previously true for the xfs_buf_read callers, but not for the xfs_trans_read_buf callers. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-27xfs: make xfs_buf_read return an error codeDarrick J. Wong1-7/+3
Convert xfs_buf_read() to return numeric error codes like most everywhere else in xfs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-01-27xfs: make xfs_buf_get_uncached return an error codeDarrick J. Wong1-2/+2
Convert xfs_buf_get_uncached() to return numeric error codes like most everywhere else in xfs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-01-27xfs: make xfs_buf_get return an error codeDarrick J. Wong1-8/+4
Convert xfs_buf_get() to return numeric error codes like most everywhere else in xfs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-01-27xfs: make xfs_buf_read_map return an error codeDarrick J. Wong1-5/+10
Convert xfs_buf_read_map() to return numeric error codes like most everywhere else in xfs. This involves moving the open-coded logic that reports metadata IO read / corruption errors and stales the buffer into xfs_buf_read_map so that the logic is all in one place. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-01-27xfs: make xfs_buf_get_map return an error codeDarrick J. Wong1-4/+9
Convert xfs_buf_get_map() to return numeric error codes like most everywhere else in xfs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-10-28xfs: mark xfs_buf_free staticChristoph Hellwig1-1/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-27xfs: get allocation alignment from the buftargDave Chinner1-0/+6
Needed to feed into the allocation routine to guarantee the memory buffers we add to bios are correctly aligned to the underlying device. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-29xfs: add struct xfs_mount pointer to struct xfs_bufChristoph Hellwig1-0/+1
We need to derive the mount pointer from a buffer in a lot of place. Add a direct pointer to short cut the pointer chasing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-29xfs: remove the b_io_length field in struct xfs_bufChristoph Hellwig1-1/+0
This field is now always idential to b_length. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-29xfs: properly type the b_log_item field in struct xfs_bufChristoph Hellwig1-1/+1
Now that the log code doesn't abuse this field any more we can declare it as a struct xfs_buf_log_item pointer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-29xfs: remove unused buffer cache APIsChristoph Hellwig1-27/+0
Now that the log code uses bios directly we can drop various special cases in the buffer cache code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-29xfs: renumber XBF_WRITE_FAILChristoph Hellwig1-1/+1
Assining a numerical value that is not close to the flags defined near by is just asking for conflicts later on. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-29xfs: remove the never used _XBF_COMPOUND flagChristoph Hellwig1-3/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-12xfs: remove unused flag argumentsEric Sandeen1-3/+2
There are several functions which take a flag argument that is only ever passed as "0," so remove these arguments. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-12xfs: merge xfs_buf_zero and xfs_buf_iomoveChristoph Hellwig1-10/+1
xfs_buf_zero is the only caller of xfs_buf_iomove. Remove support for copying from or to the buffer in xfs_buf_iomove and merge the two functions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-18xfs: fix xfs_buf magic number endian checksDarrick J. Wong1-2/+6
Create a separate magic16 check function so that we don't run afoul of static checkers. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-02-12xfs: distinguish between inobt and finobt magic valuesBrian Foster1-0/+2
The inode btree verifier code is shared between the inode btree and free inode btree because the underlying metadata formats are essentially equivalent. A side effect of this is that the verifier cannot determine whether a particular btree block should have an inobt or finobt magic value. This logic allows an unfortunate xfs_repair bug to escape detection where certain level > 0 nodes of the finobt are stamped with inobt magic by xfs_repair finobt reconstruction. This is fortunately not a severe problem since the inode btree magic values do not contribute to any changes in kernel behavior, but we do need a means to detect and prevent this problem in the future. Add a field to xfs_buf_ops to store the v4 and v5 superblock magic values expected by a particular verifier. Add a helper to check an on-disk magic value against the value expected by the verifier. Call the helper from the shared [f]inobt verifier code for magic value verification. This ensures that the inode btree blocks each have the appropriate magic value based on specific tree type and superblock version. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-12xfs: clarify documentation for the function to reverify buffersBrian Foster1-1/+1
Improve the documentation around xfs_buf_ensure_ops, which is the function that is responsible for cleaning up the b_ops state of buffers that go through xrep_findroot_block but don't match anything. Rename the function to xfs_buf_reverify. [darrick: this started off as bfoster mods of a previous patch of mine, but the renaming part is now this separate patch.] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Brian Foster <bfoster@redhat.com>
2018-10-18xfs: always assign buffer verifiers when one is providedDarrick J. Wong1-0/+2
If a caller supplies buffer ops when trying to read a buffer and the buffer doesn't already have buf ops assigned, ensure that the ops are assigned to the buffer and the verifier is run on that buffer. Note that current XFS code is careful to assign buffer ops after a xfs_{trans_,}buf_read call in which ops were not supplied. However, we should apply ops defensively in case there is ever a coding mistake; and an upcoming repair patch will need to be able to read a buffer without assigning buf ops. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-08-12xfs: remove b_last_holder & associated macrosEric Sandeen1-4/+0
The old lock tracking infrastructure in xfs using the b_last_holder field seems to only be useful if you can get into the system with a debugger; it seems that the existing tracepoints would be the way to go these days, and this old infrastructure can be removed. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-12xfs: combine [a]sync buffer submission apisBrian Foster1-2/+8
The buffer I/O submission path consists of separate function calls per type. The buffer I/O type is already controlled via buffer state (XBF_ASYNC), however, so there is no real need for separate submission functions. Combine the buffer submission functions into a single function that processes the buffer appropriately based on XBF_ASYNC. Retain an internal helper with a conditional wait parameter to continue to support batched !XBF_ASYNC submission/completion required by delwri queues. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-12xfs: add support for sub-pagesize writeback without buffer_headsChristoph Hellwig1-1/+0
Switch to using the iomap_page structure for checking sub-page uptodate status and track sub-page I/O completion status, and remove large quantities of boilerplate code working around buffer heads. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-07xfs: convert to SPDX license tagsDave Chinner1-13/+1
Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-16xfs: one-shot cached buffersDave Chinner1-0/+12
For the new growfs work, we want to ensure that we serialise secondary superblock updates with other operations (e.g. scrub) correctly, but we don't want to cache the buffers for long term reuse. We need cached buffers for serialisation, however. To solve this, introduce a "oneshot" buffer which will be marshalled through the cache but then released once the last current reference goes away. If the buffer is already cached, then we ignore the "one-shot" behaviour and leave the buffer in the state it was prior to the one-shot command being run. This means we don't perturb either the working set or existing cached buffer state by a one-shot operation. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-09xfs: make xfs_buf_incore out of lineDave Chinner1-14/+3
Move xfs_buf_incore out of line and make it the only way to look up a buffer in the buffer cache from outside the buffer cache. Convert the external users of _xfs_buf_find() to xfs_buf_incore() and make _xfs_buf_find() static. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: actually rename xfs_incore -> xfs_buf_incore] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>