| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit df0b5afc62f3368d657a8fe4a8d393ac481474c2 ]
__filemap_get_folio() with FGP_WRITEBEGIN parameter has already wait
for stable folio, so remove the redundant folio_wait_stable() in
ext4_da_write_begin(), it was left over from the commit cc883236b792
("ext4: drop unnecessary journal handle in delalloc write") that
removed the retry getting page logic.
Fixes: cc883236b792 ("ext4: drop unnecessary journal handle in delalloc write")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240419023005.2719050-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3f4830abd236d0428e50451e1ecb62e14c365e9b ]
Smatch complains "err" can be uninitialized in the caller.
fs/ext4/indirect.c:349 ext4_alloc_branch()
error: uninitialized symbol 'err'.
Set the error to zero on the success path.
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/363a4673-0fb8-4adf-b4fb-90a499077276@moroto.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0770249b90f9d9f69714b76adc36cf6c895bc1f9 ]
When CONFIG_NFSD_LEGACY_CLIENT_TRACKING is not set, the virtual file
/proc/fs/nfsd/nfsv4recoverydir
is created but responds EINVAL to any access.
This is not useful, is somewhat surprising, and it causes ltp to
complain.
The only known user of this file is in nfs-utils, which handles
non-existence and read-failure equally well. So there is nothing to
gain from leaving the file present but inaccessible.
So this patch removes the file when its content is not available - i.e.
when that config option is not selected.
Also remove the #ifdef which hides some of the enum values when
CONFIG_NFSD_V$ not selection. simple_fill_super() quietly ignores array
entries that are not present, so having slots in the array that don't
get used is perfectly acceptable. So there is no value in this #ifdef.
Reported-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 74fd48739d04 ("nfsd: new Kconfig option for legacy client tracking")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 35a1f12f0ca857fee1d7a04ef52cbd5f1f84de13 ]
A user with minimum journal size (1024 blocks these days) complained
about the following error triggered by generic/697 test in
ext4_tmpfile():
run fstests generic/697 at 2024-02-28 05:34:46
JBD2: vfstest wants too many credits credits:260 rsv_credits:0 max:256
EXT4-fs error (device loop0) in __ext4_new_inode:1083: error 28
Indeed the credit estimate in ext4_tmpfile() is huge.
EXT4_MAXQUOTAS_INIT_BLOCKS() is 219, then 10 credits from ext4_tmpfile()
itself and then ext4_xattr_credits_for_new_inode() adds more credits
needed for security attributes and ACLs. Now the
EXT4_MAXQUOTAS_INIT_BLOCKS() is in fact unnecessary because we've
already initialized quotas with dquot_init() shortly before and so
EXT4_MAXQUOTAS_TRANS_BLOCKS() is enough (which boils down to 3 credits).
Fixes: af51a2ac36d1 ("ext4: ->tmpfile() support")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Luis Henriques <lhenriques@suse.de>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Link: https://lore.kernel.org/r/20240307115320.28949-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a9e567ca45fb5280065283d10d9a11f0db61d2b ]
Patch series "mm/ksm: fix ksm exec support for prctl", v4.
commit 3c6f33b7273a ("mm/ksm: support fork/exec for prctl") inherits
MMF_VM_MERGE_ANY flag when a task calls execve(). However, it doesn't
create the mm_slot, so ksmd will not try to scan this task. The first
patch fixes the issue.
The second patch refactors to prepare for the third patch. The third
patch extends the selftests of ksm to verfity the deduplication really
happens after fork/exec inherits ths KSM setting.
This patch (of 3):
commit 3c6f33b7273a ("mm/ksm: support fork/exec for prctl") inherits
MMF_VM_MERGE_ANY flag when a task calls execve(). Howerver, it doesn't
create the mm_slot, so ksmd will not try to scan this task.
To fix it, allocate and add the mm_slot to ksm_mm_head in __bprm_mm_init()
when the mm has MMF_VM_MERGE_ANY flag.
Link: https://lkml.kernel.org/r/20240328111010.1502191-1-tujinjiang@huawei.com
Link: https://lkml.kernel.org/r/20240328111010.1502191-2-tujinjiang@huawei.com
Fixes: 3c6f33b7273a ("mm/ksm: support fork/exec for prctl")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9947a06d29c0a30da88cdc6376ca5fd87083e130 ]
Function do_xmote() is called with the glock spinlock held. Commit
86934198eefa added a 'goto skip_inval' statement at the beginning of the
function to further below where the glock spinlock is expected not to be
held anymore. Then it added code there that requires the glock spinlock
to be held. This doesn't make sense; fix this up by dropping and
retaking the spinlock where needed.
In addition, when ->lm_lock() returned an error, do_xmote() didn't fail
the locking operation, and simply left the glock hanging; fix that as
well. (This is a much older error.)
Fixes: 86934198eefa ("gfs2: Clear flags when withdraw prevents xmote")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1cd28e15864054f3c48baee9eecda1c0441c48ac ]
Currently, function finish_xmote() takes and releases the glock
spinlock. However, all of its callers immediately take that spinlock
again, so it makes more sense to take the spin lock before calling
finish_xmote() already.
With that, thaw_glock() is the only place that sets the GLF_HAVE_REPLY
flag outside of the glock spinlock, but it also takes that spinlock
immediately thereafter. Change that to set the bit when the spinlock is
already held. This allows to switch from test_and_clear_bit() to
test_bit() and clear_bit() in glock_work_func().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 9947a06d29c0 ("gfs2: do_xmote fixes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d98779e687726d8f8860f1c54b5687eec5f63a73 ]
When a DLM lockspace is released and there ares still locks in that
lockspace, DLM will unlock those locks automatically. Commit
fb6791d100d1b started exploiting this behavior to speed up filesystem
unmount: gfs2 would simply free glocks it didn't want to unlock and then
release the lockspace. This didn't take the bast callbacks for
asynchronous lock contention notifications into account, which remain
active until until a lock is unlocked or its lockspace is released.
To prevent those callbacks from accessing deallocated objects, put the
glocks that should not be unlocked on the sd_dead_glocks list, release
the lockspace, and only then free those glocks.
As an additional measure, ignore unexpected ast and bast callbacks if
the receiving glock is dead.
Fixes: fb6791d100d1b ("GFS2: skip dlm_unlock calls in unmount")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59f60005797b4018d7b46620037e0c53d690795e ]
This consistency check was originally added by commit 9287c6452d2b1
("gfs2: Fix occasional glock use-after-free"). It is ill-placed in
gfs2_glock_free() because if it holds there, it must equally hold in
__gfs2_glock_put() already. Either way, the check doesn't seem
necessary anymore.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: d98779e68772 ("gfs2: Fix potential glock use-after-free on unmount")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d9231111966b6c5a65016d58dcbeab91055bc91 ]
Commit 3e11e53041502 tries to suppress dlm_lock() lock conversion errors
that occur when the lockspace has already been released.
It does that by setting and checking the SDF_SKIP_DLM_UNLOCK flag. This
conflicts with the intended meaning of the SDF_SKIP_DLM_UNLOCK flag, so
check whether the lockspace is still allocated instead.
(Given the current DLM API, checking for this kind of error after the
fact seems easier that than to make sure that the lockspace is still
allocated before calling dlm_lock(). Changing the DLM API so that users
maintain the lockspace references themselves would be an option.)
Fixes: 3e11e53041502 ("GFS2: ignore unlock failures after withdraw")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b01189333ee91c1ae6cd96dfd1e3a3c2e69202f0 ]
Commit fffe9bee14b0 ("gfs2: Delay withdraw from atomic context")
switched from gfs2_withdraw() to gfs2_withdraw_delayed() in
gfs2_ail_error(), but failed to then check if a delayed withdraw had
occurred. Fix that by adding the missing check in __gfs2_ail_flush(),
where the spin locks are already dropped and a withdraw is possible.
Fixes: fffe9bee14b0 ("gfs2: Delay withdraw from atomic context")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ad191e0eeebf64a60ca2d16ca01a223d2b1dd25e ]
This patch fixes the copy lvb decision for user space lock requests.
Checking dlm_lvb_operations is done earlier, where granted/requested
lock modes are available to use in the matrix.
The decision had been moved to the wrong location, where granted mode
and requested mode where the same, which causes the dlm_lvb_operations
matix to produce the wrong copy decision. For PW or EX requests, the
caller could get invalid lvb data.
Fixes: 61bed0baa4db ("fs: dlm: use a non-static queue for callbacks")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ad191eb6d6942bb835a0b20b647f7c53c1d99ca4 ]
When renaming onto an existing directory entry, user space expects
the replacement entry to have the same directory offset as the
original one.
Link: https://gitlab.alpinelinux.org/alpine/aports/-/issues/15966
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-4-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a1a25be995e1014abd01600479915683e356f5c ]
I'm about to fix a tmpfs rename bug that requires the use of
internal simple_offset helpers that are not available in mm/shmem.c
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-3-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: ad191eb6d694 ("shmem: Fix shmem_rename2()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 23cdd0eed3f1fff3af323092b0b88945a7950d8e ]
User space expects the replacement (old) directory entry to have
the same directory offset after the rename.
Suggested-by: Christian Brauner <brauner@kernel.org>
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-2-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e4a862174f2a8d1653a8a9cf0815020e1d3af24 ]
Test robot reports:
> kernel test robot noticed a -19.0% regression of aim9.disk_src.ops_per_sec on:
>
> commit: a2e459555c5f9da3e619b7e47a63f98574dc75f1 ("shmem: stable directory offsets")
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git master
Feng Tang further clarifies that:
> ... the new simple_offset_add()
> called by shmem_mknod() brings extra cost related with slab,
> specifically the 'radix_tree_node', which cause the regression.
Willy's analysis is that, over time, the test workload causes
xa_alloc_cyclic() to fragment the underlying SLAB cache.
This patch replaces the offset_ctx's xarray with a Maple Tree in the
hope that Maple Tree's dense node mode will handle this scenario
more scalably.
In addition, we can widen the simple directory offset maximum to
signed long (as loff_t is also signed).
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309081306.3ecb3734-oliver.sang@intel.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820145616.6328.12620992971699079156.stgit@91.116.238.104.host.secureserver.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 23cdd0eed3f1 ("libfs: Fix simple_offset_rename_exchange()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecba88a3b32d733d41e27973e25b2bc580f64281 ]
For simple filesystems that use directory offset mapping, rely
strictly on the directory offset map to tell when a directory has
no children.
After this patch is applied, the emptiness test holds only the RCU
read lock when the directory being tested has no children.
In addition, this adds another layer of confirmation that
simple_offset_add/remove() are working as expected.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820143463.6328.7872919188371286951.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 23cdd0eed3f1 ("libfs: Fix simple_offset_rename_exchange()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7beea725a8ca412c6190090ce7c3a13b169592a1 ]
This value is used in several places, so make it a symbolic
constant.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820142741.6328.12428356024575347885.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 23cdd0eed3f1 ("libfs: Fix simple_offset_rename_exchange()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3f6d810665dfde0d33785420618ceb03fba0619d ]
Liam and Matthew say that once the RCU read lock is released,
xa_state is not safe to re-use for the next xas_find() call. But the
RCU read lock must be released on each loop iteration so that
dput(), which might_sleep(), can be called safely.
Thus we are forced to walk the offset tree with fresh state for each
directory entry. xa_find() can do this for us, though it might be a
little less efficient than maintaining xa_state locally.
We believe that in the current code base, inode->i_rwsem provides
protection for the xa_state maintained in
offset_iterate_dir(). However, there is no guarantee that will
continue to be the case in the future.
Since offset_iterate_dir() doesn't build xa_state locally any more,
there's no longer a strong need for offset_find_next(). Clean up by
rolling these two helpers together.
Suggested-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Message-ID: <170785993027.11135.8830043889278631735.stgit@91.116.238.104.host.secureserver.net>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820142021.6328.15047865406275957018.stgit@91.116.238.104.host.secureserver.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 23cdd0eed3f1 ("libfs: Fix simple_offset_rename_exchange()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c473bcdd80d4ab2ae79a7a509a6712818366e32a ]
clang-14 points out that v_size is always smaller than a 64KB
page size if that is configured by the CPU architecture:
fs/nilfs2/ioctl.c:63:19: error: result of comparison of constant 65536 with expression of type '__u16' (aka 'unsigned short') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (argv->v_size > PAGE_SIZE)
~~~~~~~~~~~~ ^ ~~~~~~~~~
This is ok, so just shut up that warning with a cast.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240328143051.1069575-7-arnd@kernel.org
Fixes: 3358b4aaa84f ("nilfs2: fix problems of memory allocation in ioctl")
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 85a6a1aff08ec9f5b929d345d066e2830e8818e5 ]
The 'TAG 66 Packet Format' description is missing the cipher code and
checksum fields that are packed into the message packet. As a result,
the buffer allocated for the packet is 3 bytes too small and
write_tag_66_packet() will write up to 3 bytes past the end of the
buffer.
Fix this by increasing the size of the allocation so the whole packet
will always fit in the buffer.
This fixes the below kasan slab-out-of-bounds bug:
BUG: KASAN: slab-out-of-bounds in ecryptfs_generate_key_packet_set+0x7d6/0xde0
Write of size 1 at addr ffff88800afbb2a5 by task touch/181
CPU: 0 PID: 181 Comm: touch Not tainted 6.6.13-gnu #1 4c9534092be820851bb687b82d1f92a426598dc6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2/GNU Guix 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4c/0x70
print_report+0xc5/0x610
? ecryptfs_generate_key_packet_set+0x7d6/0xde0
? kasan_complete_mode_report_info+0x44/0x210
? ecryptfs_generate_key_packet_set+0x7d6/0xde0
kasan_report+0xc2/0x110
? ecryptfs_generate_key_packet_set+0x7d6/0xde0
__asan_store1+0x62/0x80
ecryptfs_generate_key_packet_set+0x7d6/0xde0
? __pfx_ecryptfs_generate_key_packet_set+0x10/0x10
? __alloc_pages+0x2e2/0x540
? __pfx_ovl_open+0x10/0x10 [overlay 30837f11141636a8e1793533a02e6e2e885dad1d]
? dentry_open+0x8f/0xd0
ecryptfs_write_metadata+0x30a/0x550
? __pfx_ecryptfs_write_metadata+0x10/0x10
? ecryptfs_get_lower_file+0x6b/0x190
ecryptfs_initialize_file+0x77/0x150
ecryptfs_create+0x1c2/0x2f0
path_openat+0x17cf/0x1ba0
? __pfx_path_openat+0x10/0x10
do_filp_open+0x15e/0x290
? __pfx_do_filp_open+0x10/0x10
? __kasan_check_write+0x18/0x30
? _raw_spin_lock+0x86/0xf0
? __pfx__raw_spin_lock+0x10/0x10
? __kasan_check_write+0x18/0x30
? alloc_fd+0xf4/0x330
do_sys_openat2+0x122/0x160
? __pfx_do_sys_openat2+0x10/0x10
__x64_sys_openat+0xef/0x170
? __pfx___x64_sys_openat+0x10/0x10
do_syscall_64+0x60/0xd0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f00a703fd67
Code: 25 00 00 41 00 3d 00 00 41 00 74 37 64 8b 04 25 18 00 00 00 85 c0 75 5b 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 85 00 00 00 48 83 c4 68 5d 41 5c c3 0f 1f
RSP: 002b:00007ffc088e30b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 00007ffc088e3368 RCX: 00007f00a703fd67
RDX: 0000000000000941 RSI: 00007ffc088e48d7 RDI: 00000000ffffff9c
RBP: 00007ffc088e48d7 R08: 0000000000000001 R09: 0000000000000000
R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000941
R13: 0000000000000000 R14: 00007ffc088e48d7 R15: 00007f00a7180040
</TASK>
Allocated by task 181:
kasan_save_stack+0x2f/0x60
kasan_set_track+0x29/0x40
kasan_save_alloc_info+0x25/0x40
__kasan_kmalloc+0xc5/0xd0
__kmalloc+0x66/0x160
ecryptfs_generate_key_packet_set+0x6d2/0xde0
ecryptfs_write_metadata+0x30a/0x550
ecryptfs_initialize_file+0x77/0x150
ecryptfs_create+0x1c2/0x2f0
path_openat+0x17cf/0x1ba0
do_filp_open+0x15e/0x290
do_sys_openat2+0x122/0x160
__x64_sys_openat+0xef/0x170
do_syscall_64+0x60/0xd0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Fixes: dddfa461fc89 ("[PATCH] eCryptfs: Public key; packet management")
Signed-off-by: Brian Kubisiak <brian@kubisiak.com>
Link: https://lore.kernel.org/r/5j2q56p6qkhezva6b2yuqfrsurmvrrqtxxzrnp3wqu7xrz22i7@hoecdztoplbl
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8f27829974b025d4df2e78894105d75e3bf349f0 ]
The original mount API conversion inexplicably left out the change
from ->remount_fs to ->reconfigure; do that now.
Fixes: 7ab2fa7693c3 ("vfs: Convert openpromfs to use the new mount API")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/90b968aa-c979-420f-ba37-5acc3391b28f@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4efaa5acf0a1d2b5947f98abb3acf8bfd966422b ]
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f2b8098d72a93890e69aa24ec549ef4bc34f4db ]
One of my CI runs popped the following lockdep splat
======================================================
WARNING: possible circular locking dependency detected
6.9.0-rc4+ #1 Not tainted
------------------------------------------------------
btrfs/471533 is trying to acquire lock:
ffff92ba46980850 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_quota_disable+0x54/0x4c0
but task is already holding lock:
ffff92ba46980bd0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1c8f/0x2600
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&fs_info->subvol_sem){++++}-{3:3}:
down_read+0x42/0x170
btrfs_rename+0x607/0xb00
btrfs_rename2+0x2e/0x70
vfs_rename+0xaf8/0xfc0
do_renameat2+0x586/0x600
__x64_sys_rename+0x43/0x50
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&sb->s_type->i_mutex_key#16){++++}-{3:3}:
down_write+0x3f/0xc0
btrfs_inode_lock+0x40/0x70
prealloc_file_extent_cluster+0x1b0/0x370
relocate_file_extent_cluster+0xb2/0x720
relocate_data_extent+0x107/0x160
relocate_block_group+0x442/0x550
btrfs_relocate_block_group+0x2cb/0x4b0
btrfs_relocate_chunk+0x50/0x1b0
btrfs_balance+0x92f/0x13d0
btrfs_ioctl+0x1abf/0x2600
__x64_sys_ioctl+0x97/0xd0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&fs_info->cleaner_mutex){+.+.}-{3:3}:
__lock_acquire+0x13e7/0x2180
lock_acquire+0xcb/0x2e0
__mutex_lock+0xbe/0xc00
btrfs_quota_disable+0x54/0x4c0
btrfs_ioctl+0x206b/0x2600
__x64_sys_ioctl+0x97/0xd0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of:
&fs_info->cleaner_mutex --> &sb->s_type->i_mutex_key#16 --> &fs_info->subvol_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->subvol_sem);
lock(&sb->s_type->i_mutex_key#16);
lock(&fs_info->subvol_sem);
lock(&fs_info->cleaner_mutex);
*** DEADLOCK ***
2 locks held by btrfs/471533:
#0: ffff92ba4319e420 (sb_writers#14){.+.+}-{0:0}, at: btrfs_ioctl+0x3b5/0x2600
#1: ffff92ba46980bd0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1c8f/0x2600
stack backtrace:
CPU: 1 PID: 471533 Comm: btrfs Kdump: loaded Not tainted 6.9.0-rc4+ #1
Call Trace:
<TASK>
dump_stack_lvl+0x77/0xb0
check_noncircular+0x148/0x160
? lock_acquire+0xcb/0x2e0
__lock_acquire+0x13e7/0x2180
lock_acquire+0xcb/0x2e0
? btrfs_quota_disable+0x54/0x4c0
? lock_is_held_type+0x9a/0x110
__mutex_lock+0xbe/0xc00
? btrfs_quota_disable+0x54/0x4c0
? srso_return_thunk+0x5/0x5f
? lock_acquire+0xcb/0x2e0
? btrfs_quota_disable+0x54/0x4c0
? btrfs_quota_disable+0x54/0x4c0
btrfs_quota_disable+0x54/0x4c0
btrfs_ioctl+0x206b/0x2600
? srso_return_thunk+0x5/0x5f
? __do_sys_statfs+0x61/0x70
__x64_sys_ioctl+0x97/0xd0
do_syscall_64+0x95/0x180
? srso_return_thunk+0x5/0x5f
? reacquire_held_locks+0xd1/0x1f0
? do_user_addr_fault+0x307/0x8a0
? srso_return_thunk+0x5/0x5f
? lock_acquire+0xcb/0x2e0
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? find_held_lock+0x2b/0x80
? srso_return_thunk+0x5/0x5f
? lock_release+0xca/0x2a0
? srso_return_thunk+0x5/0x5f
? do_user_addr_fault+0x35c/0x8a0
? srso_return_thunk+0x5/0x5f
? trace_hardirqs_off+0x4b/0xc0
? srso_return_thunk+0x5/0x5f
? lockdep_hardirqs_on_prepare+0xde/0x190
? srso_return_thunk+0x5/0x5f
This happens because when we call rename we already have the inode mutex
held, and then we acquire the subvol_sem if we are a subvolume. This
makes the dependency
inode lock -> subvol sem
When we're running data relocation we will preallocate space for the
data relocation inode, and we always run the relocation under the
->cleaner_mutex. This now creates the dependency of
cleaner_mutex -> inode lock (from the prealloc) -> subvol_sem
Qgroup delete is doing this in the opposite order, it is acquiring the
subvol_sem and then it is acquiring the cleaner_mutex, which results in
this lockdep splat. This deadlock can't happen in reality, because we
won't ever rename the data reloc inode, nor is the data reloc inode a
subvolume.
However this is fairly easy to fix, simply take the cleaner mutex in the
case where we are disabling qgroups before we take the subvol_sem. This
resolves the lockdep splat.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 405ee4097c4bc3e70556520aed5ba52a511c2266 upstream.
Trailing slashes in share paths (like: /home/me/Share/) caused permission
issues with shares for clients on iOS and on Android TV for me,
but otherwise they work fine with plain old Samba.
Cc: stable@vger.kernel.org
Signed-off-by: Nandor Kracser <bonifaido@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c91ecba9e421e4f2c9219cf5042fa63a12025310 upstream.
This patch fixes generic/011 when oplocks is enable.
Avoid to send duplicate oplock break notifications like smb2 leases
case.
Fixes: 97c2ec64667b ("ksmbd: avoid to send duplicate lease break notifications")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 302e9dca8428979c9c99f2dbb44dc1783f5011c3 upstream.
If we somehow attempt to read beyond the directory size, an error
is supposed to be returned.
However, in some cases, read requests do not stop and instead enter
into a loop.
To avoid this, we set the position in the directory to the end.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 05afeeebcac850a016ec4fb1f681ceda11963562 upstream.
In most cases when adding a cluster to the directory index,
they are placed at the end, and in the bitmap, this cluster corresponds
to the last bit. The new directory size is calculated as follows:
data_size = (u64)(bit + 1) << indx->index_bits;
In the case of reusing a non-final cluster from the index,
data_size is calculated incorrectly, resulting in the directory size
differing from the actual size.
A check for cluster reuse has been added, and the size update is skipped.
Fixes: 82cae269cfa95 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 110b24eb1a749bea3440f3ca2ff890a26179050a upstream.
When counting and checking hard links in an ntfs file record,
struct MFT_REC {
struct NTFS_RECORD_HEADER rhdr; // 'FILE'
__le16 seq; // 0x10: Sequence number for this record.
>> __le16 hard_links; // 0x12: The number of hard links to record.
__le16 attr_off; // 0x14: Offset to attributes.
...
the ntfs3 driver ignored short names (DOS names), causing the link count
to be reduced by 1 and messages to be output to dmesg.
For Windows, such a situation is a minor error, meaning chkdsk does not report
errors on such a volume, and in the case of using the /f switch, it silently
corrects them, reporting that no errors were found. This does not affect
the consistency of the file system.
Nevertheless, the behavior in the ntfs3 driver is incorrect and
changes the content of the file system. This patch should fix that.
PS: most likely, there has been a confusion of concepts
MFT_REC::hard_links and inode::__i_nlink.
Fixes: 82cae269cfa95 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a8948b5450e7c65a3a34ebf4ccfcebc19335d4fb upstream.
Removes the output of this purely informational message from the
kernel buffer:
"ntfs3: Max link count 4000"
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb85dace897c5986bc2f36b3c783c6abb8a4292e upstream.
Syzbot has reported a potential hang in nilfs_detach_log_writer() called
during nilfs2 unmount.
Analysis revealed that this is because nilfs_segctor_sync(), which
synchronizes with the log writer thread, can be called after
nilfs_segctor_destroy() terminates that thread, as shown in the call trace
below:
nilfs_detach_log_writer
nilfs_segctor_destroy
nilfs_segctor_kill_thread --> Shut down log writer thread
flush_work
nilfs_iput_work_func
nilfs_dispose_list
iput
nilfs_evict_inode
nilfs_transaction_commit
nilfs_construct_segment (if inode needs sync)
nilfs_segctor_sync --> Attempt to synchronize with
log writer thread
*** DEADLOCK ***
Fix this issue by changing nilfs_segctor_sync() so that the log writer
thread returns normally without synchronizing after it terminates, and by
forcing tasks that are already waiting to complete once after the thread
terminates.
The skipped inode metadata flushout will then be processed together in the
subsequent cleanup work in nilfs_segctor_destroy().
Link: https://lkml.kernel.org/r/20240520132621.4054-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+e3973c409251e136fdd0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e3973c409251e136fdd0
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 936184eadd82906992ff1f5ab3aada70cce44cee upstream.
A potential and reproducible race issue has been identified where
nilfs_segctor_sync() would block even after the log writer thread writes a
checkpoint, unless there is an interrupt or other trigger to resume log
writing.
This turned out to be because, depending on the execution timing of the
log writer thread running in parallel, the log writer thread may skip
responding to nilfs_segctor_sync(), which causes a call to schedule()
waiting for completion within nilfs_segctor_sync() to lose the opportunity
to wake up.
The reason why waking up the task waiting in nilfs_segctor_sync() may be
skipped is that updating the request generation issued using a shared
sequence counter and adding an wait queue entry to the request wait queue
to the log writer, are not done atomically. There is a possibility that
log writing and request completion notification by nilfs_segctor_wakeup()
may occur between the two operations, and in that case, the wait queue
entry is not yet visible to nilfs_segctor_wakeup() and the wake-up of
nilfs_segctor_sync() will be carried over until the next request occurs.
Fix this issue by performing these two operations simultaneously within
the lock section of sc_state_lock. Also, following the memory barrier
guidelines for event waiting loops, move the call to set_current_state()
in the same location into the event waiting loop to ensure that a memory
barrier is inserted just before the event condition determination.
Link: https://lkml.kernel.org/r/20240520132621.4054-3-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3bf ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5d4e04634c9cf68bdf23de08ada0bb92e8befe7 upstream.
Patch series "nilfs2: fix log writer related issues".
This bug fix series covers three nilfs2 log writer-related issues,
including a timer use-after-free issue and potential deadlock issue on
unmount, and a potential freeze issue in event synchronization found
during their analysis. Details are described in each commit log.
This patch (of 3):
A use-after-free issue has been reported regarding the timer sc_timer on
the nilfs_sc_info structure.
The problem is that even though it is used to wake up a sleeping log
writer thread, sc_timer is not shut down until the nilfs_sc_info structure
is about to be freed, and is used regardless of the thread's lifetime.
Fix this issue by limiting the use of sc_timer only while the log writer
thread is alive.
Link: https://lkml.kernel.org/r/20240520132621.4054-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240520132621.4054-2-konishi.ryusuke@gmail.com
Fixes: fdce895ea5dd ("nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: "Bai, Shuangpeng" <sjb7183@psu.edu>
Closes: https://groups.google.com/g/syzkaller/c/MK_LYqtt8ko/m/8rgdWeseAwAJ
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7af2ae1b1531feab5d38ec9c8f472dc6cceb4606 upstream.
When erofs_kill_sb() is called in block dev based mode, s_bdev may not
have been initialised yet, and if CONFIG_EROFS_FS_ONDEMAND is enabled,
it will be mistaken for fscache mode, and then attempt to free an anon_dev
that has never been allocated, triggering the following warning:
============================================
ida_free called for id=0 which is not allocated.
WARNING: CPU: 14 PID: 926 at lib/idr.c:525 ida_free+0x134/0x140
Modules linked in:
CPU: 14 PID: 926 Comm: mount Not tainted 6.9.0-rc3-dirty #630
RIP: 0010:ida_free+0x134/0x140
Call Trace:
<TASK>
erofs_kill_sb+0x81/0x90
deactivate_locked_super+0x35/0x80
get_tree_bdev+0x136/0x1e0
vfs_get_tree+0x2c/0xf0
do_new_mount+0x190/0x2f0
[...]
============================================
Now when erofs_kill_sb() is called, erofs_sb_info must have been
initialised, so use sbi->fsid to distinguish between the two modes.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240419123611.947084-3-libaokun1@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07abe43a28b2c660f726d66f5470f7f114f9643a upstream.
Instead of allocating the erofs_sb_info in fill_super() allocate it during
erofs_init_fs_context() and ensure that erofs can always have the info
available during erofs_kill_sb(). After this erofs_fs_context is no longer
needed, replace ctx with sbi, no functional changes.
Suggested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240419123611.947084-2-libaokun1@huawei.com
[ Gao Xiang: trivial conflict due to a warning message. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 22e61e15af731dbe46704c775d2335e56fcef4e9 upstream.
Treat the events directory the same as other directories when it comes to
permissions. The events directory was considered different because it's
dentry is persistent, whereas the other directory dentries are created
when accessed. But the way tracefs now does its ownership by using the
root dentry's permissions as the default permissions, the events directory
can get out of sync when a remount is performed setting the group and user
permissions.
Remove the special case for the events directory on setting the
attributes. This allows the updates caused by remount to work properly as
well as simplifies the code.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.002923579@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6599bd5517be66c8344f869f3ca3a91bc10f2b9e upstream.
If the instances directory's permissions were never change, then have it
and its children use the mount point permissions as the default.
Currently, the permissions of instance directories are determined by the
instance directory's permissions itself. But if the tracefs file system is
remounted and changes the permissions, the instance directory and its
children should use the new permission.
But because both the instance directory and its children use the instance
directory's inode for permissions, it misses the update.
To demonstrate this:
# cd /sys/kernel/tracing/
# mkdir instances/foo
# ls -ld instances/foo
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 18:57 current_tracer
# mount -o remount,gid=1002 .
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo/
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 18:57 current_tracer
Notice that changing the group id to that of "lkp" did not affect the
instances directory nor its children. It should have been:
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 19:19 current_tracer
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:25 instances/foo/
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 19:19 instances
# mount -o remount,gid=1002 .
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 19:19 current_tracer
# ls -ld instances
drwxr-x--- 3 root lkp 0 May 1 19:19 instances
# ls -ld instances/foo/
drwxr-x--- 5 root lkp 0 May 1 19:25 instances/foo/
Where all files were updated by the remount gid update.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.686838327@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit baa23a8d4360d981a49913841a726edede5cdd54 upstream.
There's an inconsistency with the way permissions are handled in tracefs.
Because the permissions are generated when accessed, they default to the
root inode's permission if they were never set by the user. If the user
sets the permissions, then a flag is set and the permissions are saved via
the inode (for tracefs files) or an internal attribute field (for
eventfs).
But if a remount happens that specify the permissions, all the files that
were not changed by the user gets updated, but the ones that were are not.
If the user were to remount the file system with a given permission, then
all files and directories within that file system should be updated.
This can cause security issues if a file's permission was updated but the
admin forgot about it. They could incorrectly think that remounting with
permissions set would update all files, but miss some.
For example:
# cd /sys/kernel/tracing
# chgrp 1002 current_tracer
# ls -l
[..]
-rw-r----- 1 root root 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root root 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root root 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root root 0 May 1 21:25 dynamic_events
-r--r----- 1 root root 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root root 0 May 1 21:25 enabled_functions
Where current_tracer now has group "lkp".
# mount -o remount,gid=1001 .
# ls -l
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root tracing 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root tracing 0 May 1 21:25 dynamic_events
-r--r----- 1 root tracing 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root tracing 0 May 1 21:25 enabled_functions
Everything changed but the "current_tracer".
Add a new link list that keeps track of all the tracefs_inodes which has
the permission flags that tell if the file/dir should use the root inode's
permission or not. Then on remount, clear all the flags so that the
default behavior of using the root inode's permission is done for all
files and directories.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.529542160@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 691aae4f36f9825df6781da4399a1e718951085a upstream.
This patch fix xfstests generic/070 test with smb2 leases = yes.
cifs.ko doesn't set parent lease key and epoch in create context v2 lease.
ksmbd suppose that parent lease and epoch are vaild if data length is
v2 lease context size and handle directory lease using this values.
ksmbd should hanle it as v1 lease not v2 lease if parent lease key and
epoch are not set in create context v2 lease.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 97c2ec64667bacc49881d2b2dd9afd4d1c3fbaeb upstream.
This patch fixes generic/011 when enable smb2 leases.
if ksmbd sends multiple notifications for a file, cifs increments
the reference count of the file but it does not decrement the count by
the failure of queue_work.
So even if the file is closed, cifs does not send a SMB2_CLOSE request.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc00bc83f26eb8f2d8d9f56b949b62fd774d8432 upstream.
ΕΛΕΝΗ reported that ksmbd binds to the IPV6 wildcard (::) by default for
ipv4 and ipv6 binding. So IPV4 connections are successful only when
the Linux system parameter bindv6only is set to 0 [default value].
If this parameter is set to 1, then the ipv6 wildcard only represents
any IPV6 address. Samba creates different sockets for ipv4 and ipv6
by default. This patch off sk_ipv6only to support IPV4/IPV6 connections
without creating two sockets.
Cc: stable@vger.kernel.org
Reported-by: ΕΛΕΝΗ ΤΖΑΒΕΛΛΑ <helentzavellas@yahoo.gr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c7ad9a590d1a99ec59c7d90cef41e2b296944c4 upstream.
pagemap_scan_pmd_entry() checks if uffd-wp is set on each pte to avoid
unnecessary if set. However it was previously checking with
`pte_uffd_wp(ptep_get(pte))` without first confirming that the pte was
present. It is only valid to call pte_uffd_wp() for present ptes. For
swap ptes, pte_swp_uffd_wp() must be called because the uffd-wp bit may be
kept in a different position, depending on the arch.
This was leading to test failures in the pagemap_ioctl mm selftest, when
bringing up uffd-wp support on arm64 due to incorrectly interpretting the
uffd-wp status of migration entries.
Let's fix this by using the correct check based on pte_present(). While
we are at it, let's pass the pte to make_uffd_wp_pte() to avoid the
pointless extra ptep_get() which can't be optimized out due to READ_ONCE()
on many arches.
Link: https://lkml.kernel.org/r/20240429114104.182890-1-ryan.roberts@arm.com
Fixes: 12f6b01a0bcb ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag")
Closes: https://lore.kernel.org/linux-arm-kernel/ZiuyGXt0XWwRgFh9@x1n/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c70dce4982ce1718bf978a35f8e26160b82081f4 upstream.
make_uffd_wp_pte() was previously doing:
pte = ptep_get(ptep);
ptep_modify_prot_start(ptep);
pte = pte_mkuffd_wp(pte);
ptep_modify_prot_commit(ptep, pte);
But if another thread accessed or dirtied the pte between the first 2
calls, this could lead to loss of that information. Since
ptep_modify_prot_start() gets and clears atomically, the following is the
correct pattern and prevents any possible race. Any access after the
first call would see an invalid pte and cause a fault:
pte = ptep_modify_prot_start(ptep);
pte = pte_mkuffd_wp(pte);
ptep_modify_prot_commit(ptep, pte);
Link: https://lkml.kernel.org/r/20240429114017.182570-1-ryan.roberts@arm.com
Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c88033efe9a391e72ba6b5df4b01d6e628f4e734 upstream.
Userfaultfd unregister includes a step to remove wr-protect bits from all
the relevant pgtable entries, but that only covered an explicit
UFFDIO_UNREGISTER ioctl, not a close() on the userfaultfd itself. Cover
that too. This fixes a WARN trace.
The only user visible side effect is the user can observe leftover
wr-protect bits even if the user close()ed on an userfaultfd when
releasing the last reference of it. However hopefully that should be
harmless, and nothing bad should happen even if so.
This change is now more important after the recent page-table-check
patch we merged in mm-unstable (446dd9ad37d0 ("mm/page_table_check:
support userfault wr-protect entries")), as we'll do sanity check on
uffd-wp bits without vma context. So it's better if we can 100%
guarantee no uffd-wp bit leftovers, to make sure each report will be
valid.
Link: https://lore.kernel.org/all/000000000000ca4df20616a0fe16@google.com/
Fixes: f369b07c8614 ("mm/uffd: reset write protection when unregister with wp-mode")
Analyzed-by: David Hildenbrand <david@redhat.com>
Link: https://lkml.kernel.org/r/20240422133311.2987675-1-peterx@redhat.com
Reported-by: syzbot+d8426b591c36b21c750e@syzkaller.appspotmail.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e03418abde871314e1a3a550f4c8afb7b89cb273 upstream.
We previously would call btrfs_check_leaf() if we had the check
integrity code enabled, which meant that we could only run the extended
leaf checks if we had WRITTEN set on the header flags.
This leaves a gap in our checking, because we could end up with
corruption on disk where WRITTEN isn't set on the leaf, and then the
extended leaf checks don't get run which we rely on to validate all of
the item pointers to make sure we don't access memory outside of the
extent buffer.
However, since 732fab95abe2 ("btrfs: check-integrity: remove
CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call
btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only
ever call it on blocks that are being written out, and thus have WRITTEN
set, or that are being read in, which should have WRITTEN set.
Add checks to make sure we have WRITTEN set appropriately, and then make
sure __btrfs_check_leaf() always does the item checking. This will
protect us from file systems that have been corrupted and no longer have
WRITTEN set on some of the blocks.
This was hit on a crafted image tweaking the WRITTEN bit and reported by
KASAN as out-of-bound access in the eb accessors. The example is a dir
item at the end of an eb.
[2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2
[2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
[2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f]
[2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1
[2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0
[2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206
[2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0
[2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748
[2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9
[2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a
[2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8
[2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
[2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0
[2.621] Call Trace:
[2.621] <TASK>
[2.621] ? show_regs+0x74/0x80
[2.621] ? die_addr+0x46/0xc0
[2.621] ? exc_general_protection+0x161/0x2a0
[2.621] ? asm_exc_general_protection+0x26/0x30
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? btrfs_get_16+0x34b/0x6d0
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? __pfx_btrfs_get_16+0x10/0x10
[2.621] ? __pfx_mutex_unlock+0x10/0x10
[2.621] btrfs_match_dir_item_name+0x101/0x1a0
[2.621] btrfs_lookup_dir_item+0x1f3/0x280
[2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10
[2.621] btrfs_get_tree+0xd25/0x1910
Reported-by: lei lu <llfamsec@gmail.com>
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more details from report ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5357cb268c41b4e2b7383d2759fc562f5b58c33 upstream.
[BUG]
After kernel commit 86211eea8ae1 ("btrfs: qgroup: validate
btrfs_qgroup_inherit parameter"), user space tool snapper will fail to
create snapshot using its timeline feature.
[CAUSE]
It turns out that, if using timeline snapper would unconditionally pass
btrfs_qgroup_inherit parameter (assigning the new snapshot to qgroup 1/0)
for snapshot creation.
In that case, since qgroup is disabled there would be no qgroup 1/0, and
btrfs_qgroup_check_inherit() would return -ENOENT and fail the whole
snapshot creation.
[FIX]
Just skip the check if qgroup is not enabled.
This is to keep the older behavior for user space tools, as if the
kernel behavior changed for user space, it is a regression of kernel.
Thankfully snapper is also fixing the behavior by detecting if qgroup is
running in the first place, so the effect should not be that huge.
Link: https://github.com/openSUSE/snapper/issues/894
Fixes: 86211eea8ae1 ("btrfs: qgroup: validate btrfs_qgroup_inherit parameter")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63a6ce5a1a6261e4c70bad2b55c4e0de8da4762e upstream.
[BUG]
When running generic/287, the following file extent items can be
generated:
item 16 key (258 EXTENT_DATA 2682880) itemoff 15305 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 1378414592 nr 462848
extent data offset 0 nr 462848 ram 2097152
extent compression 0 (none)
Note that file extent item is not a compressed one, but its ram_bytes is
way larger than its disk_num_bytes.
According to btrfs on-disk scheme, ram_bytes should match disk_num_bytes
if it's not a compressed one.
[CAUSE]
Since commit b73a6fd1b1ef ("btrfs: split partial dio bios before
submit"), for partial dio writes, we would split the ordered extent.
However the function btrfs_split_ordered_extent() doesn't update the
ram_bytes even it has already shrunk the disk_num_bytes.
Originally the function btrfs_split_ordered_extent() is only introduced
for zoned devices in commit d22002fd37bd ("btrfs: zoned: split ordered
extent when bio is sent"), but later commit b73a6fd1b1ef ("btrfs: split
partial dio bios before submit") makes non-zoned btrfs affected.
Thankfully for un-compressed file extent, we do not really utilize the
ram_bytes member, thus it won't cause any real problem.
[FIX]
Also update btrfs_ordered_extent::ram_bytes inside
btrfs_split_ordered_extent().
Fixes: d22002fd37bd ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9af503d91298c3f2945e73703f0e00995be08c30 upstream.
The previous patch that replaced BUG_ON by error handling forgot to
unlock the mutex in the error path.
Link: https://lore.kernel.org/all/Zh%2fHpAGFqa7YAFuM@duo.ucw.cz
Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 7411055db5ce ("btrfs: handle chunk tree lookup error in btrfs_relocate_sys_chunks()")
CC: stable@vger.kernel.org
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7fd524b9bd1be210fe79035800f4bd78a41b349f ]
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
