| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit e23d7e82b707d1d0a627e334fb46370e4f772c11 upstream.
There's an issue that if special files is created before quota
project is enabled, then it's not possible to link this file. This
works fine for normal files. This happens because xfs_quota skips
special files (no ioctls to set necessary flags). The check for
having the same project ID for source and destination then fails as
source file doesn't have any ID.
mkfs.xfs -f /dev/sda
mount -o prjquota /dev/sda /mnt/test
mkdir /mnt/test/foo
mkfifo /mnt/test/foo/fifo1
xfs_quota -xc "project -sp /mnt/test/foo 9" /mnt/test
> Setting up project 9 (path /mnt/test/foo)...
> xfs_quota: skipping special file /mnt/test/foo/fifo1
> Processed 1 (/etc/projects and cmdline) paths for project 9 with recursion depth infinite (-1).
ln /mnt/test/foo/fifo1 /mnt/test/foo/fifo1_link
> ln: failed to create hard link '/mnt/test/testdir/fifo1_link' => '/mnt/test/testdir/fifo1': Invalid cross-device link
mkfifo /mnt/test/foo/fifo2
ln /mnt/test/foo/fifo2 /mnt/test/foo/fifo2_link
Fix this by allowing linking of special files to the project quota
if special files doesn't have any ID set (ID = 0).
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f2e812c1522dab847912309b00abcc762dd696da upstream.
syzbot reported an ext4 panic during a page fault where found a
journal handle when it didn't expect to find one. The structure
it tripped over had a value of 'TRAN' in the first entry in the
structure, and that indicates it tripped over a struct xfs_trans
instead of a jbd2 handle.
The reason for this is that the page fault was taken during a
copy-out to a user buffer from an xfs bulkstat operation. XFS uses
an "empty" transaction context for bulkstat to do automated metadata
buffer cleanup, and so the transaction context is valid across the
copyout of the bulkstat info into the user buffer.
We are using empty transaction contexts like this in XFS to reduce
the risk of failing to release objects we reference during the
operation, especially during error handling. Hence we really need to
ensure that we can take page faults from these contexts without
leaving landmines for the code processing the page fault to trip
over.
However, this same behaviour could happen from any other filesystem
that triggers a page fault or any other exception that is handled
on-stack from within a task context that has current->journal_info
set. Having a page fault from some other filesystem bounce into XFS
where we have to run a transaction isn't a bug at all, but the usage
of current->journal_info means that this could result corruption of
the outer task's journal_info structure.
The problem is purely that we now have two different contexts that
now think they own current->journal_info. IOWs, no filesystem can
allow page faults or on-stack exceptions while current->journal_info
is set by the filesystem because the exception processing might use
current->journal_info itself.
If we end up with nested XFS transactions whilst holding an empty
transaction, then it isn't an issue as the outer transaction does
not hold a log reservation. If we ignore the current->journal_info
usage, then the only problem that might occur is a deadlock if the
exception tries to take the same locks the upper context holds.
That, however, is not a problem that setting current->journal_info
would solve, so it's largely an irrelevant concern here.
IOWs, we really only use current->journal_info for a warning check
in xfs_vm_writepages() to ensure we aren't doing writeback from a
transaction context. Writeback might need to do allocation, so it
can need to run transactions itself. Hence it's a debug check to
warn us that we've done something silly, and largely it is not all
that useful.
So let's just remove all the use of current->journal_info in XFS and
get rid of all the potential issues from nested contexts where
current->journal_info might get misused by another filesystem
context.
Reported-by: syzbot+cdee56dbcdf0096ef605@syzkaller.appspotmail.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Mark Tinguely <mark.tinguely@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15922f5dbf51dad334cde888ce6835d377678dc9 upstream.
If a filesystem has a busted stripe alignment configuration on disk
(e.g. because broken RAID firmware told mkfs that swidth was smaller
than sunit), then the filesystem will refuse to mount due to the
stripe validation failing. This failure is triggering during distro
upgrades from old kernels lacking this check to newer kernels with
this check, and currently the only way to fix it is with offline
xfs_db surgery.
This runtime validity checking occurs when we read the superblock
for the first time and causes the mount to fail immediately. This
prevents the rewrite of stripe unit/width via
mount options that occurs later in the mount process. Hence there is
no way to recover this situation without resorting to offline xfs_db
rewrite of the values.
However, we parse the mount options long before we read the
superblock, and we know if the mount has been asked to re-write the
stripe alignment configuration when we are reading the superblock
and verifying it for the first time. Hence we can conditionally
ignore stripe verification failures if the mount options specified
will correct the issue.
We validate that the new stripe unit/width are valid before we
overwrite the superblock values, so we can ignore the invalid config
at verification and fail the mount later if the new values are not
valid. This, at least, gives users the chance of correcting the
issue after a kernel upgrade without having to resort to xfs-db
hacks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e4c3b72a6ea93ed9c1815c74312eee9305638852 upstream.
While performing the IO fault injection test, I caught the following data
corruption report:
XFS (dm-0): Internal error ltbno + ltlen > bno at line 1957 of file fs/xfs/libxfs/xfs_alloc.c. Caller xfs_free_ag_extent+0x79c/0x1130
CPU: 3 PID: 33 Comm: kworker/3:0 Not tainted 6.5.0-rc7-next-20230825-00001-g7f8666926889 #214
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
Workqueue: xfs-inodegc/dm-0 xfs_inodegc_worker
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
xfs_corruption_error+0x134/0x150
xfs_free_ag_extent+0x7d3/0x1130
__xfs_free_extent+0x201/0x3c0
xfs_trans_free_extent+0x29b/0xa10
xfs_extent_free_finish_item+0x2a/0xb0
xfs_defer_finish_noroll+0x8d1/0x1b40
xfs_defer_finish+0x21/0x200
xfs_itruncate_extents_flags+0x1cb/0x650
xfs_free_eofblocks+0x18f/0x250
xfs_inactive+0x485/0x570
xfs_inodegc_worker+0x207/0x530
process_scheduled_works+0x24a/0xe10
worker_thread+0x5ac/0xc60
kthread+0x2cd/0x3c0
ret_from_fork+0x4a/0x80
ret_from_fork_asm+0x11/0x20
</TASK>
XFS (dm-0): Corruption detected. Unmount and run xfs_repair
After analyzing the disk image, it was found that the corruption was
triggered by the fact that extent was recorded in both inode datafork
and AGF btree blocks. After a long time of reproduction and analysis,
we found that the reason of free sapce btree corruption was that the
AGF btree was not recovered correctly.
Consider the following situation, Checkpoint A and Checkpoint B are in
the same record and share the same start LSN1, buf items of same object
(AGF btree block) is included in both Checkpoint A and Checkpoint B. If
the buf item in Checkpoint A has been recovered and updates metadata LSN
permanently, then the buf item in Checkpoint B cannot be recovered,
because log recovery skips items with a metadata LSN >= the current LSN
of the recovery item. If there is still an inode item in Checkpoint B
that records the Extent X, the Extent X will be recorded in both inode
datafork and AGF btree block after Checkpoint B is recovered. Such
transaction can be seen when allocing enxtent for inode bmap, it record
both the addition of extent to the inode extent list and the removing
extent from the AGF.
|------------Record (LSN1)------------------|---Record (LSN2)---|
|-------Checkpoint A----------|----------Checkpoint B-----------|
| Buf Item(Extent X) | Buf Item / Inode item(Extent X) |
| Extent X is freed | Extent X is allocated |
After commit 12818d24db8a ("xfs: rework log recovery to submit buffers
on LSN boundaries") was introduced, we submit buffers on lsn boundaries
during log recovery. The above problem can be avoided under normal paths,
but it's not guaranteed under abnormal paths. Consider the following
process, if an error was encountered after recover buf item in Checkpoint
A and before recover buf item in Checkpoint B, buffers that have been
added to the buffer_list will still be submitted, this violates the
submits rule on lsn boundaries. So buf item in Checkpoint B cannot be
recovered on the next mount due to current lsn of transaction equal to
metadata lsn on disk. The detailed process of the problem is as follows.
First Mount:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
/* recover buf item in Checkpoint A */
xlog_recover_buf_commit_pass2
xlog_recover_do_reg_buffer
/* add buffer of agf btree block to buffer_list */
xfs_buf_delwri_queue(bp, buffer_list)
...
==> Encounter read IO error and return
/* submit buffers regardless of error */
if (!list_empty(&buffer_list))
xfs_buf_delwri_submit(&buffer_list);
<buf items of agf btree block in Checkpoint A recovery success>
Second Mount:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
/* recover buf item in Checkpoint B */
xlog_recover_buf_commit_pass2
/* buffer of agf btree block wouldn't added to
buffer_list due to lsn equal to current_lsn */
if (XFS_LSN_CMP(lsn, current_lsn) >= 0)
goto out_release
<buf items of agf btree block in Checkpoint B wouldn't recovery>
In order to make sure that submits buffers on lsn boundaries in the
abnormal paths, we need to check error status before submit buffers that
have been added from the last record processed. If error status exist,
buffers in the bufffer_list should not be writen to disk.
Canceling the buffers in the buffer_list directly isn't correct, unlike
any other place where write list was canceled, these buffers has been
initialized by xfs_buf_item_init() during recovery and held by buf item,
buf items will not be released in xfs_buf_delwri_cancel(), it's not easy
to solve.
If the filesystem has been shut down, then delwri list submission will
error out all buffers on the list via IO submission/completion and do
all the correct cleanup automatically. So shutting down the filesystem
could prevents buffers in the bufffer_list from being written to disk.
Fixes: 50d5c8d8e938 ("xfs: check LSN ordering for v5 superblocks during recovery")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 75bcffbb9e7563259b7aed0fa77459d6a3a35627 upstream.
Chandan reported a AGI/AGF lock order hang on xfs/168 during recent
testing. The cause of the problem was the task running xfs_growfs
to shrink the filesystem. A failure occurred trying to remove the
free space from the btrees that the shrink would make disappear,
and that meant it ran the error handling for a partial failure.
This error path involves restoring the per-ag block reservations,
and that requires calculating the amount of space needed to be
reserved for the free inode btree. The growfs operation hung here:
[18679.536829] down+0x71/0xa0
[18679.537657] xfs_buf_lock+0xa4/0x290 [xfs]
[18679.538731] xfs_buf_find_lock+0xf7/0x4d0 [xfs]
[18679.539920] xfs_buf_lookup.constprop.0+0x289/0x500 [xfs]
[18679.542628] xfs_buf_get_map+0x2b3/0xe40 [xfs]
[18679.547076] xfs_buf_read_map+0xbb/0x900 [xfs]
[18679.562616] xfs_trans_read_buf_map+0x449/0xb10 [xfs]
[18679.569778] xfs_read_agi+0x1cd/0x500 [xfs]
[18679.573126] xfs_ialloc_read_agi+0xc2/0x5b0 [xfs]
[18679.578708] xfs_finobt_calc_reserves+0xe7/0x4d0 [xfs]
[18679.582480] xfs_ag_resv_init+0x2c5/0x490 [xfs]
[18679.586023] xfs_ag_shrink_space+0x736/0xd30 [xfs]
[18679.590730] xfs_growfs_data_private.isra.0+0x55e/0x990 [xfs]
[18679.599764] xfs_growfs_data+0x2f1/0x410 [xfs]
[18679.602212] xfs_file_ioctl+0xd1e/0x1370 [xfs]
trying to get the AGI lock. The AGI lock was held by a fstress task
trying to do an inode allocation, and it was waiting on the AGF
lock to allocate a new inode chunk on disk. Hence deadlock.
The fix for this is for the growfs code to hold the AGI over the
transaction roll it does in the error path. It already holds the AGF
locked across this, and that is what causes the lock order inversion
in the xfs_ag_resv_init() call.
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Fixes: 46141dc891f7 ("xfs: introduce xfs_ag_shrink_space()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4b2f459d86252619448455013f581836c8b1b7da upstream.
A data corruption problem was reported by CoreOS image builders
when using reflink based disk image copies and then converting
them to qcow2 images. The converted images failed the conversion
verification step, and it was isolated down to the fact that
qemu-img uses SEEK_HOLE/SEEK_DATA to find the data it is supposed to
copy.
The reproducer allowed me to isolate the issue down to a region of
the file that had overlapping data and COW fork extents, and the
problem was that the COW fork extent was being reported in it's
entirity by xfs_seek_iomap_begin() and so skipping over the real
data fork extents in that range.
This was somewhat hidden by the fact that 'xfs_bmap -vvp' reported
all the extents correctly, and reading the file completely (i.e. not
using seek to skip holes) would map the file correctly and all the
correct data extents are read. Hence the problem is isolated to just
the xfs_seek_iomap_begin() implementation.
Instrumentation with trace_printk made the problem obvious: we are
passing the wrong length to xfs_trim_extent() in
xfs_seek_iomap_begin(). We are passing the end_fsb, not the
maximum length of the extent we want to trim the map too. Hence the
COW extent map never gets trimmed to the start of the next data fork
extent, and so the seek code treats the entire COW fork extent as
unwritten and skips entirely over the data fork extents in that
range.
Link: https://github.com/coreos/coreos-assembler/issues/3728
Fixes: 60271ab79d40 ("xfs: fix SEEK_DATA for speculative COW fork preallocation")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e610e856b938a1fc86e7ee83ad2f39716082bca7 upstream.
When the kernel is in lockdown mode, debugfs will only show files that
are world-readable and cannot be written, mmaped, or used with ioctl.
That more or less describes the scrub stats file, except that the
permissions are wrong -- they should be 0444, not 0644. You can't write
the stats file, so the 0200 makes no sense.
Meanwhile, the clear_stats file is only writable, but it got mode 0400
instead of 0200, which would make more sense.
Fix both files so that they make sense.
Fixes: d7a74cad8f451 ("xfs: track usage statistics of online fsck")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0afba9a8363f17d4efed22a8764df33389aebe8 upstream.
A reviewer was confused by the init_sa logic in this function. Upon
checking the logic, I discovered that the code is imprecise. What we
want to do here is check that there is an ownership record in the rmap
btree for the AG that contains a btree block.
For an inode-rooted btree (e.g. the bmbt) the per-AG btree cursors have
not been initialized because inode btrees can span multiple AGs.
Therefore, we must initialize the per-AG btree cursors in sc->sa before
proceeding. That is what init_sa controls, and hence the logic should
be gated on XFS_BTREE_ROOT_IN_INODE, not XFS_BTREE_LONG_PTRS.
In practice, ROOT_IN_INODE and LONG_PTRS are coincident so this hasn't
mattered. However, we're about to refactor both of those flags into
separate btree_ops fields so we want this the logic to make sense
afterwards.
Fixes: 858333dcf021a ("xfs: check btree block ownership with bnobt/rmapbt when scrubbing btree")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0090d6e1b210551e63cf43958dc7a1ec942cdde9 upstream.
While loading a zone's info during creation of a block group, we can race
with a device replace operation and then trigger a use-after-free on the
device that was just replaced (source device of the replace operation).
This happens because at btrfs_load_zone_info() we extract a device from
the chunk map into a local variable and then use the device while not
under the protection of the device replace rwsem. So if there's a device
replace operation happening when we extract the device and that device
is the source of the replace operation, we will trigger a use-after-free
if before we finish using the device the replace operation finishes and
frees the device.
Fix this by enlarging the critical section under the protection of the
device replace rwsem so that all uses of the device are done inside the
critical section.
CC: stable@vger.kernel.org # 6.1.x: 15c12fcc50a1: btrfs: zoned: introduce a zone_info struct in btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 09a46725cc84: btrfs: zoned: factor out per-zone logic from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 9e0e3e74dc69: btrfs: zoned: factor out single bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 87463f7e0250: btrfs: zoned: factor out DUP bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 87463f7e0250d471fac41e7c9c45ae21d83b5f85 upstream.
Split the code handling a type DUP block group from
btrfs_load_block_group_zone_info to make the code more readable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
btrfs_load_block_group_zone_info
commit 9e0e3e74dc6928a0956f4e27e24d473c65887e96 upstream.
Split the code handling a type single block group from
btrfs_load_block_group_zone_info to make the code more readable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 09a46725cc84165af452d978a3532d6b97a28796 upstream.
Split out a helper for the body of the per-zone loop in
btrfs_load_block_group_zone_info to make the function easier to read and
modify.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15c12fcc50a1b12a747f8b6ec05cdb18c537a4d1 upstream.
Add a new zone_info structure to hold per-zone information in
btrfs_load_block_group_zone_info and prepare for breaking out helpers
from it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 952b023f06a24b2ad6ba67304c4c84d45bea2f18 upstream.
After commit "ocfs2: return real error code in ocfs2_dio_wr_get_block",
fstests/generic/300 become from always failed to sometimes failed:
========================================================================
[ 473.293420 ] run fstests generic/300
[ 475.296983 ] JBD2: Ignoring recovery information on journal
[ 475.302473 ] ocfs2: Mounting device (253,1) on (node local, slot 0) with ordered data mode.
[ 494.290998 ] OCFS2: ERROR (device dm-1): ocfs2_change_extent_flag: Owner 5668 has an extent at cpos 78723 which can no longer be found
[ 494.291609 ] On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted.
[ 494.292018 ] OCFS2: File system is now read-only.
[ 494.292224 ] (kworker/19:11,2628,19):ocfs2_mark_extent_written:5272 ERROR: status = -30
[ 494.292602 ] (kworker/19:11,2628,19):ocfs2_dio_end_io_write:2374 ERROR: status = -3
fio: io_u error on file /mnt/scratch/racer: Read-only file system: write offset=460849152, buflen=131072
=========================================================================
In __blockdev_direct_IO, ocfs2_dio_wr_get_block is called to add unwritten
extents to a list. extents are also inserted into extent tree in
ocfs2_write_begin_nolock. Then another thread call fallocate to puch a
hole at one of the unwritten extent. The extent at cpos was removed by
ocfs2_remove_extent(). At end io worker thread, ocfs2_search_extent_list
found there is no such extent at the cpos.
T1 T2 T3
inode lock
...
insert extents
...
inode unlock
ocfs2_fallocate
__ocfs2_change_file_space
inode lock
lock ip_alloc_sem
ocfs2_remove_inode_range inode
ocfs2_remove_btree_range
ocfs2_remove_extent
^---remove the extent at cpos 78723
...
unlock ip_alloc_sem
inode unlock
ocfs2_dio_end_io
ocfs2_dio_end_io_write
lock ip_alloc_sem
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_search_extent_list
^---failed to find extent
...
unlock ip_alloc_sem
In most filesystems, fallocate is not compatible with racing with AIO+DIO,
so fix it by adding to wait for all dio before fallocate/punch_hole like
ext4.
Link: https://lkml.kernel.org/r/20240408082041.20925-3-glass.su@suse.com
Fixes: b25801038da5 ("ocfs2: Support xfs style space reservation ioctls")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b8cb324277ee16f3eca3055b96fce4735a5a41c6 upstream.
The default atime related mount option is '-o realtime' which means file
atime should be updated if atime <= ctime or atime <= mtime. atime should
be updated in the following scenario, but it is not:
==========================================================
$ rm /mnt/testfile;
$ echo test > /mnt/testfile
$ stat -c "%X %Y %Z" /mnt/testfile
1711881646 1711881646 1711881646
$ sleep 5
$ cat /mnt/testfile > /dev/null
$ stat -c "%X %Y %Z" /mnt/testfile
1711881646 1711881646 1711881646
==========================================================
And the reason the atime in the test is not updated is that ocfs2 calls
ktime_get_real_ts64() in __ocfs2_mknod_locked during file creation. Then
inode_set_ctime_current() is called in inode_set_ctime_current() calls
ktime_get_coarse_real_ts64() to get current time.
ktime_get_real_ts64() is more accurate than ktime_get_coarse_real_ts64().
In my test box, I saw ctime set by ktime_get_coarse_real_ts64() is less
than ktime_get_real_ts64() even ctime is set later. The ctime of the new
inode is smaller than atime.
The call trace is like:
ocfs2_create
ocfs2_mknod
__ocfs2_mknod_locked
....
ktime_get_real_ts64 <------- set atime,ctime,mtime, more accurate
ocfs2_populate_inode
...
ocfs2_init_acl
ocfs2_acl_set_mode
inode_set_ctime_current
current_time
ktime_get_coarse_real_ts64 <-------less accurate
ocfs2_file_read_iter
ocfs2_inode_lock_atime
ocfs2_should_update_atime
atime <= ctime ? <-------- false, ctime < atime due to accuracy
So here call ktime_get_coarse_real_ts64 to set inode time coarser while
creating new files. It may lower the accuracy of file times. But it's
not a big deal since we already use coarse time in other places like
ocfs2_update_inode_atime and inode_set_ctime_current.
Link: https://lkml.kernel.org/r/20240408082041.20925-5-glass.su@suse.com
Fixes: c62c38f6b91b ("ocfs2: replace CURRENT_TIME macro")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5cbcb62dddf5346077feb82b7b0c9254222d3445 upstream.
While taking a kernel core dump with makedumpfile on a larger system,
softlockup messages often appear.
While softlockup warnings can be harmless, they can also interfere with
things like RCU freeing memory, which can be problematic when the kdump
kexec image is configured with as little memory as possible.
Avoid the softlockup, and give things like work items and RCU a chance to
do their thing during __read_vmcore by adding a cond_resched.
Link: https://lkml.kernel.org/r/20240507091858.36ff767f@imladris.surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e221c45da3770962418fb30c27d941bbc70d595a upstream.
The 'NFS error' NFSERR_OPNOTSUPP is not described by any of the official
NFS related RFCs, but appears to have snuck into some older .x files for
NFSv2.
Either way, it is not in RFC1094, RFC1813 or any of the NFSv4 RFCs, so
should not be returned by the knfsd server, and particularly not by the
"LOOKUP" operation.
Instead, let's return NFSERR_STALE, which is more appropriate if the
filesystem encodes the filehandle as FILEID_INVALID.
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2bfc4214c69c62da13a9da8e3c3db5539da2ccd3 upstream.
Fix an issue where get_write is not used in smb2_set_ea().
Fixes: 6fc0a265e1b9 ("ksmbd: fix potential circular locking issue in smb2_set_ea()")
Cc: stable@vger.kernel.org
Reported-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1cdeca6a7264021e20157de0baf7880ff0ced822 upstream.
If the directory name in the root of the share starts with
character like 镜(0x955c) or Ṝ(0x1e5c), it (and anything inside)
cannot be accessed. The leading slash check must be checked after
converting unicode to nls string.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 99bc9f2eb3f79a2b4296d9bf43153e1d10ca50d3 ]
dentry->d_fsdata is set to NFS_FSDATA_BLOCKED while unlinking or
renaming-over a file to ensure that no open succeeds while the NFS
operation progressed on the server.
Setting dentry->d_fsdata to NFS_FSDATA_BLOCKED is done under ->d_lock
after checking the refcount is not elevated. Any attempt to open the
file (through that name) will go through lookp_open() which will take
->d_lock while incrementing the refcount, we can be sure that once the
new value is set, __nfs_lookup_revalidate() *will* see the new value and
will block.
We don't have any locking guarantee that when we set ->d_fsdata to NULL,
the wait_var_event() in __nfs_lookup_revalidate() will notice.
wait/wake primitives do NOT provide barriers to guarantee order. We
must use smp_load_acquire() in wait_var_event() to ensure we look at an
up-to-date value, and must use smp_store_release() before wake_up_var().
This patch adds those barrier functions and factors out
block_revalidate() and unblock_revalidate() far clarity.
There is also a hypothetical bug in that if memory allocation fails
(which never happens in practice) we might leave ->d_fsdata locked.
This patch adds the missing call to unblock_revalidate().
Reported-and-tested-by: Richard Kojedzinszky <richard+debian+bugreport@kojedz.in>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1071501
Fixes: 3c59366c207e ("NFS: don't unhash dentry during unlink/rename")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 28568c906c1bb5f7560e18082ed7d6295860f1c2 ]
In commit 4ca9f31a2be66 ("NFSv4.1 test and add 4.1 trunking transport"),
we introduce the ability to query the NFS server for possible trunking
locations of the existing filesystem. However, we never checked the
returned file system path for these alternative locations. According
to the RFC, the server can say that the filesystem currently known
under "fs_root" of fs_location also resides under these server
locations under the following "rootpath" pathname. The client cannot
handle trunking a filesystem that reside under different location
under different paths other than what the main path is. This patch
enforces the check that fs_root path and rootpath path in fs_location
reply is the same.
Fixes: 4ca9f31a2be6 ("NFSv4.1 test and add 4.1 trunking transport")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 85e833cd7243bda7285492b0653c3abb1e2e757b ]
In ondemand mode, when the daemon is processing an open request, if the
kernel flags the cache as CACHEFILES_DEAD, the cachefiles_daemon_write()
will always return -EIO, so the daemon can't pass the copen to the kernel.
Then the kernel process that is waiting for the copen triggers a hung_task.
Since the DEAD state is irreversible, it can only be exited by closing
/dev/cachefiles. Therefore, after calling cachefiles_io_error() to mark
the cache as CACHEFILES_DEAD, if in ondemand mode, flush all requests to
avoid the above hungtask. We may still be able to read some of the cached
data before closing the fd of /dev/cachefiles.
Note that this relies on the patch that adds reference counting to the req,
otherwise it may UAF.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-12-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b4391e77a6bf24cba2ef1590e113d9b73b11039 ]
After installing the anonymous fd, we can now see it in userland and close
it. However, at this point we may not have gotten the reference count of
the cache, but we will put it during colse fd, so this may cause a cache
UAF.
So grab the cache reference count before fd_install(). In addition, by
kernel convention, fd is taken over by the user land after fd_install(),
and the kernel should not call close_fd() after that, i.e., it should call
fd_install() after everything is ready, thus fd_install() is called after
copy_to_user() succeeds.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
Suggested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-10-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4988e35e95fc938bdde0e15880fe72042fc86acf ]
Now every time the daemon reads an open request, it gets a new anonymous fd
and ondemand_id. With the introduction of "restore", it is possible to read
the same open request more than once, and therefore an object can have more
than one anonymous fd.
If the anonymous fd is not unique, the following concurrencies will result
in an fd leak:
t1 | t2 | t3
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
load->fd = fd0
ondemand_id = object_id0
------ restore ------
cachefiles_ondemand_restore
// restore REQ_A
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
load->fd = fd1
ondemand_id = object_id1
process_open_req(REQ_A)
write(devfd, ("copen %u,%llu", msg->msg_id, size))
cachefiles_ondemand_copen
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
kfree(REQ_A)
process_open_req(REQ_A)
// copen fails due to no req
// daemon close(fd1)
cachefiles_ondemand_fd_release
// set object closed
-- umount --
cachefiles_withdraw_cookie
cachefiles_ondemand_clean_object
cachefiles_ondemand_init_close_req
if (!cachefiles_ondemand_object_is_open(object))
return -ENOENT;
// The fd0 is not closed until the daemon exits.
However, the anonymous fd holds the reference count of the object and the
object holds the reference count of the cookie. So even though the cookie
has been relinquished, it will not be unhashed and freed until the daemon
exits.
In fscache_hash_cookie(), when the same cookie is found in the hash list,
if the cookie is set with the FSCACHE_COOKIE_RELINQUISHED bit, then the new
cookie waits for the old cookie to be unhashed, while the old cookie is
waiting for the leaked fd to be closed, if the daemon does not exit in time
it will trigger a hung task.
To avoid this, allocate a new anonymous fd only if no anonymous fd has
been allocated (ondemand_id == 0) or if the previously allocated anonymous
fd has been closed (ondemand_id == -1). Moreover, returns an error if
ondemand_id is valid, letting the daemon know that the current userland
restore logic is abnormal and needs to be checked.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-9-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4b4391e77a6b ("cachefiles: defer exposing anon_fd until after copy_to_user() succeeds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e6d704f02aa4c50c7bc5fe91a4401df249a137b ]
The err_put_fd label is only used once, so remove it to make the code
more readable. In addition, the logic for deleting error request and
CLOSE request is merged to simplify the code.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-6-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4b4391e77a6b ("cachefiles: defer exposing anon_fd until after copy_to_user() succeeds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da4a827416066191aafeeccee50a8836a826ba10 ]
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60
Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963
CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #564
Call Trace:
kasan_report+0x93/0xc0
cachefiles_ondemand_daemon_read+0xb41/0xb60
vfs_read+0x169/0xb50
ksys_read+0xf5/0x1e0
Allocated by task 116:
kmem_cache_alloc+0x140/0x3a0
cachefiles_lookup_cookie+0x140/0xcd0
fscache_cookie_state_machine+0x43c/0x1230
[...]
Freed by task 792:
kmem_cache_free+0xfe/0x390
cachefiles_put_object+0x241/0x480
fscache_cookie_state_machine+0x5c8/0x1230
[...]
==================================================================
Following is the process that triggers the issue:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_withdraw_cookie
cachefiles_ondemand_clean_object(object)
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
msg->object_id = req->object->ondemand->ondemand_id
------ restore ------
cachefiles_ondemand_restore
xas_for_each(&xas, req, ULONG_MAX)
xas_set_mark(&xas, CACHEFILES_REQ_NEW)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
copy_to_user(_buffer, msg, n)
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
------ close(fd) ------
cachefiles_ondemand_fd_release
cachefiles_put_object
cachefiles_put_object
kmem_cache_free(cachefiles_object_jar, object)
REQ_A->object->ondemand->ondemand_id
// object UAF !!!
When we see the request within xa_lock, req->object must not have been
freed yet, so grab the reference count of object before xa_unlock to
avoid the above issue.
Fixes: 0a7e54c1959c ("cachefiles: resend an open request if the read request's object is closed")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-5-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4b4391e77a6b ("cachefiles: defer exposing anon_fd until after copy_to_user() succeeds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de3e26f9e5b76fc628077578c001c4a51bf54d06 ]
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0x609/0xab0
Write of size 4 at addr ffff888109164a80 by task ondemand-04-dae/4962
CPU: 11 PID: 4962 Comm: ondemand-04-dae Not tainted 6.8.0-rc7-dirty #542
Call Trace:
kasan_report+0x94/0xc0
cachefiles_ondemand_daemon_read+0x609/0xab0
vfs_read+0x169/0xb50
ksys_read+0xf5/0x1e0
Allocated by task 626:
__kmalloc+0x1df/0x4b0
cachefiles_ondemand_send_req+0x24d/0x690
cachefiles_create_tmpfile+0x249/0xb30
cachefiles_create_file+0x6f/0x140
cachefiles_look_up_object+0x29c/0xa60
cachefiles_lookup_cookie+0x37d/0xca0
fscache_cookie_state_machine+0x43c/0x1230
[...]
Freed by task 626:
kfree+0xf1/0x2c0
cachefiles_ondemand_send_req+0x568/0x690
cachefiles_create_tmpfile+0x249/0xb30
cachefiles_create_file+0x6f/0x140
cachefiles_look_up_object+0x29c/0xa60
cachefiles_lookup_cookie+0x37d/0xca0
fscache_cookie_state_machine+0x43c/0x1230
[...]
==================================================================
Following is the process that triggers the issue:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
copy_to_user(_buffer, msg, n)
process_open_req(REQ_A)
------ restore ------
cachefiles_ondemand_restore
xas_for_each(&xas, req, ULONG_MAX)
xas_set_mark(&xas, CACHEFILES_REQ_NEW);
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
write(devfd, ("copen %u,%llu", msg->msg_id, size));
cachefiles_ondemand_copen
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
kfree(REQ_A)
cachefiles_ondemand_get_fd(REQ_A)
fd = get_unused_fd_flags
file = anon_inode_getfile
fd_install(fd, file)
load = (void *)REQ_A->msg.data;
load->fd = fd;
// load UAF !!!
This issue is caused by issuing a restore command when the daemon is still
alive, which results in a request being processed multiple times thus
triggering a UAF. So to avoid this problem, add an additional reference
count to cachefiles_req, which is held while waiting and reading, and then
released when the waiting and reading is over.
Note that since there is only one reference count for waiting, we need to
avoid the same request being completed multiple times, so we can only
complete the request if it is successfully removed from the xarray.
Fixes: e73fa11a356c ("cachefiles: add restore command to recover inflight ondemand read requests")
Suggested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-4-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4b4391e77a6b ("cachefiles: defer exposing anon_fd until after copy_to_user() succeeds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e73fa11a356ca0905c3cc648eaacc6f0f2d2c8b3 ]
Previously, in ondemand read scenario, if the anonymous fd was closed by
user daemon, inflight and subsequent read requests would return EIO.
As long as the device connection is not released, user daemon can hold
and restore inflight requests by setting the request flag to
CACHEFILES_REQ_NEW.
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-6-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4b4391e77a6b ("cachefiles: defer exposing anon_fd until after copy_to_user() succeeds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a790040838c736495d5afd6b2d636f159f817f1 ]
The following concurrency may cause a read request to fail to be completed
and result in a hung:
t1 | t2
---------------------------------------------------------
cachefiles_ondemand_copen
req = xa_erase(&cache->reqs, id)
// Anon fd is maliciously closed.
cachefiles_ondemand_fd_release
xa_lock(&cache->reqs)
cachefiles_ondemand_set_object_close(object)
xa_unlock(&cache->reqs)
cachefiles_ondemand_set_object_open
// No one will ever close it again.
cachefiles_ondemand_daemon_read
cachefiles_ondemand_select_req
// Get a read req but its fd is already closed.
// The daemon can't issue a cread ioctl with an closed fd, then hung.
So add spin_lock for cachefiles_ondemand_info to protect ondemand_id and
state, thus we can avoid the above problem in cachefiles_ondemand_copen()
by using ondemand_id to determine if fd has been closed.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-8-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a7e54c1959c0feb2de23397ec09c7692364313e ]
When an anonymous fd is closed by user daemon, if there is a new read
request for this file comes up, the anonymous fd should be re-opened
to handle that read request rather than fail it directly.
1. Introduce reopening state for objects that are closed but have
inflight/subsequent read requests.
2. No longer flush READ requests but only CLOSE requests when anonymous
fd is closed.
3. Enqueue the reopen work to workqueue, thus user daemon could get rid
of daemon_read context and handle that request smoothly. Otherwise,
the user daemon will send a reopen request and wait for itself to
process the request.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-4-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 0a790040838c ("cachefiles: add spin_lock for cachefiles_ondemand_info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c5ecfe16e7699011c12c2d44e55437415331fa3 ]
We'll introduce a @work_struct field for @object in subsequent patches,
it will enlarge the size of @object.
As the result of that, this commit extracts ondemand info field from
@object.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-3-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 0a790040838c ("cachefiles: add spin_lock for cachefiles_ondemand_info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 357a18d033143617e9c7d420c8f0dd4cbab5f34d ]
Previously, @ondemand_id field was used not only to identify ondemand
state of the object, but also to represent the index of the xarray.
This commit introduces @state field to decouple the role of @ondemand_id
and adds helpers to access it.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-2-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 0a790040838c ("cachefiles: add spin_lock for cachefiles_ondemand_info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0fc75c5940fa634d84e64c93bfc388e1274ed013 ]
Even with CACHEFILES_DEAD set, we can still read the requests, so in the
following concurrency the request may be used after it has been freed:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
// close dev fd
cachefiles_flush_reqs
complete(&REQ_A->done)
kfree(REQ_A)
xa_lock(&cache->reqs);
cachefiles_ondemand_select_req
req->msg.opcode != CACHEFILES_OP_READ
// req use-after-free !!!
xa_unlock(&cache->reqs);
xa_destroy(&cache->reqs)
Hence remove requests from cache->reqs when flushing them to avoid
accessing freed requests.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-3-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7c55b78818cfb732680c4a72ab270cc2d2ee3d0f upstream.
When an xattr size is not what is expected, it is printed out to the
kernel log in hex format as a form of debugging. But when that xattr
size is bigger than the expected size, printing it out can cause an
access off the end of the buffer.
Fix this all up by properly restricting the size of the debug hex dump
in the kernel log.
Reported-by: syzbot+9dfe490c8176301c1d06@syzkaller.appspotmail.com
Cc: Dave Kleikamp <shaggy@kernel.org>
Link: https://lore.kernel.org/r/2024051433-slider-cloning-98f9@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7373a51e7998b508af7136530f3a997b286ce81c ]
The error handling in nilfs_empty_dir() when a directory folio/page read
fails is incorrect, as in the old ext2 implementation, and if the
folio/page cannot be read or nilfs_check_folio() fails, it will falsely
determine the directory as empty and corrupt the file system.
In addition, since nilfs_empty_dir() does not immediately return on a
failed folio/page read, but continues to loop, this can cause a long loop
with I/O if i_size of the directory's inode is also corrupted, causing the
log writer thread to wait and hang, as reported by syzbot.
Fix these issues by making nilfs_empty_dir() immediately return a false
value (0) if it fails to get a directory folio/page.
Link: https://lkml.kernel.org/r/20240604134255.7165-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+c8166c541d3971bf6c87@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c8166c541d3971bf6c87
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09a46acb3697e50548bb265afa1d79163659dd85 ]
In prepartion for switching from kmap() to kmap_local(), return the kmap
address from nilfs_get_page() instead of having the caller look up
page_address().
[konishi.ryusuke: fixed a missing blank line after declaration]
Link: https://lkml.kernel.org/r/20231127143036.2425-7-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 7373a51e7998 ("nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 340f0c7067a95281ad13734f8225f49c6cf52067 ]
The change to update the permissions of the eventfs_inode had the
misconception that using the tracefs_inode would find all the
eventfs_inodes that have been updated and reset them on remount.
The problem with this approach is that the eventfs_inodes are freed when
they are no longer used (basically the reason the eventfs system exists).
When they are freed, the updated eventfs_inodes are not reset on a remount
because their tracefs_inodes have been freed.
Instead, since the events directory eventfs_inode always has a
tracefs_inode pointing to it (it is not freed when finished), and the
events directory has a link to all its children, have the
eventfs_remount() function only operate on the events eventfs_inode and
have it descend into its children updating their uid and gids.
Link: https://lore.kernel.org/all/CAK7LNARXgaWw3kH9JgrnH4vK6fr8LDkNKf3wq8NhMWJrVwJyVQ@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.754424703@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: baa23a8d4360d ("tracefs: Reset permissions on remount if permissions are options")
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1c189c6cb8b0fb7b5ee549237d27889c40c2f8b ]
lease break wait for lease break acknowledgment.
rwsem is more suitable than unlock while traversing the list for parent
lease break in ->m_op_list.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 02c418774f76a0a36a6195c9dbf8971eb4130a15 upstream.
Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such
deadlock.
Cc: stable@vger.kernel.org
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb33eb2ef0d88e75564983ef057b44c5b7e4fded upstream.
Qgroup extent records are created when delayed ref heads are created and
then released after accounting extents at btrfs_qgroup_account_extents(),
called during the transaction commit path.
If a transaction is aborted we free the qgroup records by calling
btrfs_qgroup_destroy_extent_records() at btrfs_destroy_delayed_refs(),
unless we don't have delayed references. We are incorrectly assuming
that no delayed references means we don't have qgroup extents records.
We can currently have no delayed references because we ran them all
during a transaction commit and the transaction was aborted after that
due to some error in the commit path.
So fix this by ensuring we btrfs_qgroup_destroy_extent_records() at
btrfs_destroy_delayed_refs() even if we don't have any delayed references.
Reported-by: syzbot+0fecc032fa134afd49df@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/0000000000004e7f980619f91835@google.com/
Fixes: 81f7eb00ff5b ("btrfs: destroy qgroup extent records on transaction abort")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d274c19a71b3a276949933859610721a453946b upstream.
We have been seeing crashes on duplicate keys in
btrfs_set_item_key_safe():
BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192)
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.c:2620!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs]
With the following stack trace:
#0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4)
#1 btrfs_drop_extents (fs/btrfs/file.c:411:4)
#2 log_one_extent (fs/btrfs/tree-log.c:4732:9)
#3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9)
#4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9)
#5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8)
#6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8)
#7 btrfs_sync_file (fs/btrfs/file.c:1933:8)
#8 vfs_fsync_range (fs/sync.c:188:9)
#9 vfs_fsync (fs/sync.c:202:9)
#10 do_fsync (fs/sync.c:212:9)
#11 __do_sys_fdatasync (fs/sync.c:225:9)
#12 __se_sys_fdatasync (fs/sync.c:223:1)
#13 __x64_sys_fdatasync (fs/sync.c:223:1)
#14 do_syscall_x64 (arch/x86/entry/common.c:52:14)
#15 do_syscall_64 (arch/x86/entry/common.c:83:7)
#16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121)
So we're logging a changed extent from fsync, which is splitting an
extent in the log tree. But this split part already exists in the tree,
triggering the BUG().
This is the state of the log tree at the time of the crash, dumped with
drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py)
to get more details than btrfs_print_leaf() gives us:
>>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"])
leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610
leaf 33439744 flags 0x100000000000000
fs uuid e5bd3946-400c-4223-8923-190ef1f18677
chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160
generation 7 transid 9 size 8192 nbytes 8473563889606862198
block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
sequence 204 flags 0x10(PREALLOC)
atime 1716417703.220000000 (2024-05-22 15:41:43)
ctime 1716417704.983333333 (2024-05-22 15:41:44)
mtime 1716417704.983333333 (2024-05-22 15:41:44)
otime 17592186044416.000000000 (559444-03-08 01:40:16)
item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13
index 195 namelen 3 name: 193
item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37
location key (0 UNKNOWN.0 0) type XATTR
transid 7 data_len 1 name_len 6
name: user.a
data a
item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 303144960 nr 12288
extent data offset 0 nr 4096 ram 12288
extent compression 0 (none)
item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53
generation 9 type 2 (prealloc)
prealloc data disk byte 303144960 nr 12288
prealloc data offset 4096 nr 8192
item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53
generation 9 type 2 (prealloc)
prealloc data disk byte 303144960 nr 12288
prealloc data offset 8192 nr 4096
...
So the real problem happened earlier: notice that items 4 (4k-12k) and 5
(8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and
item 5 starts at i_size.
Here is the state of the filesystem tree at the time of the crash:
>>> root = prog.crashed_thread().stack_trace()[2]["inode"].root
>>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0))
>>> print_extent_buffer(nodes[0])
leaf 30425088 level 0 items 184 generation 9 owner 5
leaf 30425088 flags 0x100000000000000
fs uuid e5bd3946-400c-4223-8923-190ef1f18677
chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
...
item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160
generation 7 transid 7 size 4096 nbytes 12288
block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
sequence 6 flags 0x10(PREALLOC)
atime 1716417703.220000000 (2024-05-22 15:41:43)
ctime 1716417703.220000000 (2024-05-22 15:41:43)
mtime 1716417703.220000000 (2024-05-22 15:41:43)
otime 1716417703.220000000 (2024-05-22 15:41:43)
item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13
index 195 namelen 3 name: 193
item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37
location key (0 UNKNOWN.0 0) type XATTR
transid 7 data_len 1 name_len 6
name: user.a
data a
item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 303144960 nr 12288
extent data offset 0 nr 8192 ram 12288
extent compression 0 (none)
item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53
generation 9 type 2 (prealloc)
prealloc data disk byte 303144960 nr 12288
prealloc data offset 8192 nr 4096
Item 5 in the log tree corresponds to item 183 in the filesystem tree,
but nothing matches item 4. Furthermore, item 183 is the last item in
the leaf.
btrfs_log_prealloc_extents() is responsible for logging prealloc extents
beyond i_size. It first truncates any previously logged prealloc extents
that start beyond i_size. Then, it walks the filesystem tree and copies
the prealloc extent items to the log tree.
If it hits the end of a leaf, then it calls btrfs_next_leaf(), which
unlocks the tree and does another search. However, while the filesystem
tree is unlocked, an ordered extent completion may modify the tree. In
particular, it may insert an extent item that overlaps with an extent
item that was already copied to the log tree.
This may manifest in several ways depending on the exact scenario,
including an EEXIST error that is silently translated to a full sync,
overlapping items in the log tree, or this crash. This particular crash
is triggered by the following sequence of events:
- Initially, the file has i_size=4k, a regular extent from 0-4k, and a
prealloc extent beyond i_size from 4k-12k. The prealloc extent item is
the last item in its B-tree leaf.
- The file is fsync'd, which copies its inode item and both extent items
to the log tree.
- An xattr is set on the file, which sets the
BTRFS_INODE_COPY_EVERYTHING flag.
- The range 4k-8k in the file is written using direct I/O. i_size is
extended to 8k, but the ordered extent is still in flight.
- The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this
calls copy_inode_items_to_log(), which calls
btrfs_log_prealloc_extents().
- btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the
filesystem tree. Since it starts before i_size, it skips it. Since it
is the last item in its B-tree leaf, it calls btrfs_next_leaf().
- btrfs_next_leaf() unlocks the path.
- The ordered extent completion runs, which converts the 4k-8k part of
the prealloc extent to written and inserts the remaining prealloc part
from 8k-12k.
- btrfs_next_leaf() does a search and finds the new prealloc extent
8k-12k.
- btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into
the log tree. Note that it overlaps with the 4k-12k prealloc extent
that was copied to the log tree by the first fsync.
- fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k
extent that was written.
- This tries to drop the range 4k-8k in the log tree, which requires
adjusting the start of the 4k-12k prealloc extent in the log tree to
8k.
- btrfs_set_item_key_safe() sees that there is already an extent
starting at 8k in the log tree and calls BUG().
Fix this by detecting when we're about to insert an overlapping file
extent item in the log tree and truncating the part that would overlap.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0bcfd9aa4dafa03b88d68bf66b694df2a3e76cf3 upstream.
When the inode is being dropped from the dentry, the TRACEFS_EVENT_INODE
flag needs to be cleared to prevent a remount from calling
eventfs_remount() on the tracefs_inode private data. There's a race
between the inode is dropped (and the dentry freed) to where the inode is
actually freed. If a remount happens between the two, the eventfs_inode
could be accessed after it is freed (only the dentry keeps a ref count on
it).
Currently the TRACEFS_EVENT_INODE flag is cleared from the dentry iput()
function. But this is incorrect, as it is possible that the inode has
another reference to it. The flag should only be cleared when the inode is
really being dropped and has no more references. That happens in the
drop_inode callback of the inode, as that gets called when the last
reference of the inode is released.
Remove the tracefs_d_iput() function and move its logic to the more
appropriate tracefs_drop_inode() callback function.
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.908205106@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Fixes: baa23a8d4360d ("tracefs: Reset permissions on remount if permissions are options")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8898e7f288c47d450a3cf1511c791a03550c0789 upstream.
The directories require unique inode numbers but all the eventfs files
have the same inode number. Prevent the directories from having the same
inode numbers as the files as that can confuse some tooling.
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.428826685@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Fixes: 834bf76add3e6 ("eventfs: Save directory inodes in the eventfs_inode structure")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d4e9a968738bf66d3bb852dd5588d4c7afd6d7f4 upstream.
In function eventfs_find_events,there is a potential null pointer
that may be caused by calling update_events_attr which will perform
some operations on the members of the ei struct when ei is NULL.
Hence,When ei->is_freed is set,return NULL directly.
Link: https://lore.kernel.org/linux-trace-kernel/20240513053338.63017-1-hao.ge@linux.dev
Cc: stable@vger.kernel.org
Fixes: 8186fff7ab64 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f06d1b10cb016d5aaecdb1804fefca025387bd10 upstream.
Olga showed me a case where the client was sending multiple READ_PLUS
calls to the server in parallel, and the server replied
NFS4ERR_OPNOTSUPP to each. The client would fall back to READ for the
first reply, but fail to retry the other calls.
I fix this by removing the test for NFS_CAP_READ_PLUS in
nfs4_read_plus_not_supported(). This allows us to reschedule any
READ_PLUS call that has a NFS4ERR_OPNOTSUPP return value, even after the
capability has been cleared.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: c567552612ec ("NFS: Add READ_PLUS data segment support")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c0a2e0b0ae661457c8505fecc7be5501aa7a715 upstream.
Shifting *signed int* typed constant 1 left by 31 bits causes undefined
behavior. Specify the correct *unsigned long* type by using 1UL instead.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0c0b4a49d3e7f49690a6827a41faeffad5df7e21 upstream.
Syzbot reports a warning as follows:
============================================
WARNING: CPU: 0 PID: 5075 at fs/mbcache.c:419 mb_cache_destroy+0x224/0x290
Modules linked in:
CPU: 0 PID: 5075 Comm: syz-executor199 Not tainted 6.9.0-rc6-gb947cc5bf6d7
RIP: 0010:mb_cache_destroy+0x224/0x290 fs/mbcache.c:419
Call Trace:
<TASK>
ext4_put_super+0x6d4/0xcd0 fs/ext4/super.c:1375
generic_shutdown_super+0x136/0x2d0 fs/super.c:641
kill_block_super+0x44/0x90 fs/super.c:1675
ext4_kill_sb+0x68/0xa0 fs/ext4/super.c:7327
[...]
============================================
This is because when finding an entry in ext4_xattr_block_cache_find(), if
ext4_sb_bread() returns -ENOMEM, the ce's e_refcnt, which has already grown
in the __entry_find(), won't be put away, and eventually trigger the above
issue in mb_cache_destroy() due to reference count leakage.
So call mb_cache_entry_put() on the -ENOMEM error branch as a quick fix.
Reported-by: syzbot+dd43bd0f7474512edc47@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=dd43bd0f7474512edc47
Fixes: fb265c9cb49e ("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240504075526.2254349-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a9f3a9842927e4af7ca10c19c94dad83bebd713 upstream.
Now ac_groups_linear_remaining is of type __u16 and s_mb_max_linear_groups
is of type unsigned int, so an overflow occurs when setting a value above
65535 through the mb_max_linear_groups sysfs interface. Therefore, the
type of ac_groups_linear_remaining is set to __u32 to avoid overflow.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240319113325.3110393-8-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2a09f3d782de952f09a3962d03b939e7fa7ffa4 upstream.
Truncate operation can race with writeback, in which inode->i_size can get
truncated and therefore size - folio_pos() can be negative. This fixes the
len calculation. However this path doesn't get easily triggered even
with data journaling.
Cc: stable@kernel.org # v6.5
Fixes: 80be8c5cc925 ("Fixes: ext4: Make mpage_journal_page_buffers use folio")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/cff4953b5c9306aba71e944ab176a5d396b9a1b7.1709182250.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d065f507d82307d6161ac75c025111fb8b08a46 upstream.
After switching smaps_rollup to use VMA iterator, searching for next entry
is part of the condition expression of the do-while loop. So the current
VMA needs to be addressed before the continue statement.
Otherwise, with some VMAs skipped, userspace observed memory
consumption from /proc/pid/smaps_rollup will be smaller than the sum of
the corresponding fields from /proc/pid/smaps.
Link: https://lkml.kernel.org/r/20240523183531.2535436-1-yzhong@purestorage.com
Fixes: c4c84f06285e ("fs/proc/task_mmu: stop using linked list and highest_vm_end")
Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
