Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Rename and export helpers that get write access to a mount. They
are used in overlayfs to get write access to the upper mount.
- Print the pretty name of the root device on boot failure. This
helps in scenarios where we would usually only print
"unknown-block(1,2)".
- Add an internal SB_I_NOUMASK flag. This is another part in the
endless POSIX ACL saga in a way.
When POSIX ACLs are enabled via SB_POSIXACL the vfs cannot strip
the umask because if the relevant inode has POSIX ACLs set it might
take the umask from there. But if the inode doesn't have any POSIX
ACLs set then we apply the umask in the filesytem itself. So we end
up with:
(1) no SB_POSIXACL -> strip umask in vfs
(2) SB_POSIXACL -> strip umask in filesystem
The umask semantics associated with SB_POSIXACL allowed filesystems
that don't even support POSIX ACLs at all to raise SB_POSIXACL
purely to avoid umask stripping. That specifically means NFS v4 and
Overlayfs. NFS v4 does it because it delegates this to the server
and Overlayfs because it needs to delegate umask stripping to the
upper filesystem, i.e., the filesystem used as the writable layer.
This went so far that SB_POSIXACL is raised eve on kernels that
don't even have POSIX ACL support at all.
Stop this blatant abuse and add SB_I_NOUMASK which is an internal
superblock flag that filesystems can raise to opt out of umask
handling. That should really only be the two mentioned above. It's
not that we want any filesystems to do this. Ideally we have all
umask handling always in the vfs.
- Make overlayfs use SB_I_NOUMASK too.
- Now that we have SB_I_NOUMASK, stop checking for SB_POSIXACL in
IS_POSIXACL() if the kernel doesn't have support for it. This is a
very old patch but it's only possible to do this now with the wider
cleanup that was done.
- Follow-up work on fake path handling from last cycle. Citing mostly
from Amir:
When overlayfs was first merged, overlayfs files of regular files
and directories, the ones that are installed in file table, had a
"fake" path, namely, f_path is the overlayfs path and f_inode is
the "real" inode on the underlying filesystem.
In v6.5, we took another small step by introducing of the
backing_file container and the file_real_path() helper. This change
allowed vfs and filesystem code to get the "real" path of an
overlayfs backing file. With this change, we were able to make
fsnotify work correctly and report events on the "real" filesystem
objects that were accessed via overlayfs.
This method works fine, but it still leaves the vfs vulnerable to
new code that is not aware of files with fake path. A recent
example is commit db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get
the i_version"). This commit uses direct referencing to f_path in
IMA code that otherwise uses file_inode() and file_dentry() to
reference the filesystem objects that it is measuring.
This contains work to switch things around: instead of having
filesystem code opt-in to get the "real" path, have generic code
opt-in for the "fake" path in the few places that it is needed.
Is it far more likely that new filesystems code that does not use
the file_dentry() and file_real_path() helpers will end up causing
crashes or averting LSM/audit rules if we keep the "fake" path
exposed by default.
This change already makes file_dentry() moot, but for now we did
not change this helper just added a WARN_ON() in ovl_d_real() to
catch if we have made any wrong assumptions.
After the dust settles on this change, we can make file_dentry() a
plain accessor and we can drop the inode argument to ->d_real().
- Switch struct file to SLAB_TYPESAFE_BY_RCU. This looks like a small
change but it really isn't and I would like to see everyone on
their tippie toes for any possible bugs from this work.
Essentially we've been doing most of what SLAB_TYPESAFE_BY_RCU for
files since a very long time because of the nasty interactions
between the SCM_RIGHTS file descriptor garbage collection. So
extending it makes a lot of sense but it is a subtle change. There
are almost no places that fiddle with file rcu semantics directly
and the ones that did mess around with struct file internal under
rcu have been made to stop doing that because it really was always
dodgy.
I forgot to put in the link tag for this change and the discussion
in the commit so adding it into the merge message:
https://lore.kernel.org/r/20230926162228.68666-1-mjguzik@gmail.com
Cleanups:
- Various smaller pipe cleanups including the removal of a spin lock
that was only used to protect against writes without pipe_lock()
from O_NOTIFICATION_PIPE aka watch queues. As that was never
implemented remove the additional locking from pipe_write().
- Annotate struct watch_filter with the new __counted_by attribute.
- Clarify do_unlinkat() cleanup so that it doesn't look like an extra
iput() is done that would cause issues.
- Simplify file cleanup when the file has never been opened.
- Use module helper instead of open-coding it.
- Predict error unlikely for stale retry.
- Use WRITE_ONCE() for mount expiry field instead of just commenting
that one hopes the compiler doesn't get smart.
Fixes:
- Fix readahead on block devices.
- Fix writeback when layztime is enabled and inodes whose timestamp
is the only thing that changed reside on wb->b_dirty_time. This
caused excessively large zombie memory cgroup when lazytime was
enabled as such inodes weren't handled fast enough.
- Convert BUG_ON() to WARN_ON_ONCE() in open_last_lookups()"
* tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
file, i915: fix file reference for mmap_singleton()
vfs: Convert BUG_ON to WARN_ON_ONCE in open_last_lookups
writeback, cgroup: switch inodes with dirty timestamps to release dying cgwbs
chardev: Simplify usage of try_module_get()
ovl: rely on SB_I_NOUMASK
fs: fix umask on NFS with CONFIG_FS_POSIX_ACL=n
fs: store real path instead of fake path in backing file f_path
fs: create helper file_user_path() for user displayed mapped file path
fs: get mnt_writers count for an open backing file's real path
vfs: stop counting on gcc not messing with mnt_expiry_mark if not asked
vfs: predict the error in retry_estale as unlikely
backing file: free directly
vfs: fix readahead(2) on block devices
io_uring: use files_lookup_fd_locked()
file: convert to SLAB_TYPESAFE_BY_RCU
vfs: shave work on failed file open
fs: simplify misleading code to remove ambiguity regarding ihold()/iput()
watch_queue: Annotate struct watch_filter with __counted_by
fs/pipe: use spinlock in pipe_read() only if there is a watch_queue
fs/pipe: remove unnecessary spinlock from pipe_write()
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull autofs mount api updates from Christian Brauner:
"This ports autofs to the new mount api. The patchset has existed for
quite a while but never made it upstream. Ian picked it back up.
This also fixes a bug where fs_param_is_fd() was passed a garbage
param->dirfd but it expected it to be set to the fd that was used to
set param->file otherwise result->uint_32 contains nonsense. So make
sure it's set.
One less filesystem using the old mount api. We're getting there,
albeit rather slow. The last remaining major filesystem that hasn't
converted is btrfs. Patches exist - I even wrote them - but so far
they haven't made it upstream"
* tag 'vfs-6.7.autofs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
autofs: fix add autofs_parse_fd()
fsconfig: ensure that dirfd is set to aux
autofs: fix protocol sub version setting
autofs: convert autofs to use the new mount api
autofs: validate protocol version
autofs: refactor parse_options()
autofs: reformat 0pt enum declaration
autofs: refactor super block info init
autofs: add autofs_parse_fd()
autofs: refactor autofs_prepare_pipe()
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs superblock updates from Christian Brauner:
"This contains the work to make block device opening functions return a
struct bdev_handle instead of just a struct block_device. The same
struct bdev_handle is then also passed to block device closing
functions.
This allows us to propagate context from opening to closing a block
device without having to modify all users everytime.
Sidenote, in the future we might even want to try and have block
device opening functions return a struct file directly but that's a
series on top of this.
These are further preparatory changes to be able to count writable
opens and blocking writes to mounted block devices. That's a separate
piece of work for next cycle and for that we absolutely need the
changes to btrfs that have been quietly dropped somehow.
Originally the series contained a patch that removed the old
blkdev_*() helpers. But since this would've caused needles churn in
-next for bcachefs we ended up delaying it.
The second piece of work addresses one of the major annoyances about
the work last cycle, namely that we required dropping s_umount
whenever we used the superblock and fs_holder_ops for a block device.
The reason for that requirement had been that in some codepaths
s_umount could've been taken under disk->open_mutex (that's always
been the case, at least theoretically). For example, on surprise block
device removal or media change. And opening and closing block devices
required grabbing disk->open_mutex as well.
So we did the work and went through the block layer and fixed all
those places so that s_umount is never taken under disk->open_mutex.
This means no more brittle games where we yield and reacquire s_umount
during block device opening and closing and no more requirements where
block devices need to be closed. Filesystems don't need to care about
this.
There's a bunch of other follow-up work such as moving block device
freezing and thawing to holder operations which makes it work for all
block devices and not just the main block device just as we did for
surprise removal. But that is for next cycle.
Tested with fstests for all major fses, blktests, LTP"
* tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (37 commits)
porting: update locking requirements
fs: assert that open_mutex isn't held over holder ops
block: assert that we're not holding open_mutex over blk_report_disk_dead
block: move bdev_mark_dead out of disk_check_media_change
block: WARN_ON_ONCE() when we remove active partitions
block: simplify bdev_del_partition()
fs: Avoid grabbing sb->s_umount under bdev->bd_holder_lock
jfs: fix log->bdev_handle null ptr deref in lbmStartIO
bcache: Fixup error handling in register_cache()
xfs: Convert to bdev_open_by_path()
reiserfs: Convert to bdev_open_by_dev/path()
ocfs2: Convert to use bdev_open_by_dev()
nfs/blocklayout: Convert to use bdev_open_by_dev/path()
jfs: Convert to bdev_open_by_dev()
f2fs: Convert to bdev_open_by_dev/path()
ext4: Convert to bdev_open_by_dev()
erofs: Convert to use bdev_open_by_path()
btrfs: Convert to bdev_open_by_path()
fs: Convert to bdev_open_by_dev()
mm/swap: Convert to use bdev_open_by_dev()
...
|
|
With recent block level changes we should never be in a situation where
we hold disk->open_mutex when calling into these helpers. So assert that
in the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-6-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The implementation of bdev holder operations such as fs_bdev_mark_dead()
and fs_bdev_sync() grab sb->s_umount semaphore under
bdev->bd_holder_lock. This is problematic because it leads to
disk->open_mutex -> sb->s_umount lock ordering which is counterintuitive
(usually we grab higher level (e.g. filesystem) locks first and lower
level (e.g. block layer) locks later) and indeed makes lockdep complain
about possible locking cycles whenever we open a block device while
holding sb->s_umount semaphore. Implement a function
bdev_super_lock_shared() which safely transitions from holding
bdev->bd_holder_lock to holding sb->s_umount on alive superblock without
introducing the problematic lock dependency. We use this function
fs_bdev_sync() and fs_bdev_mark_dead().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231018152924.3858-1-jack@suse.cz
Link: https://lore.kernel.org/r/20231017184823.1383356-1-hch@lst.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When sbi->flag is JFS_NOINTEGRITY in lmLogOpen(), log->bdev_handle can't
be inited, so it value will be NULL.
Therefore, add the "log ->no_integrity=1" judgment in lbmStartIO() to avoid such
problems.
Reported-and-tested-by: syzbot+23bc20037854bb335d59@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://lore.kernel.org/r/20231009094557.1398920-1-lizhi.xu@windriver.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert xfs to use bdev_open_by_path() and pass the handle around.
CC: "Darrick J. Wong" <djwong@kernel.org>
CC: linux-xfs@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-28-jack@suse.cz
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert reiserfs to use bdev_open_by_dev/path() and pass the handle
around.
CC: reiserfs-devel@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-27-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert ocfs2 heartbeat code to use bdev_open_by_dev() and pass the
handle around.
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: ocfs2-devel@oss.oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-26-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert block device handling to use bdev_open_by_dev/path() and pass
the handle around.
CC: linux-nfs@vger.kernel.org
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-25-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert jfs to use bdev_open_by_dev() and pass the handle around.
CC: Dave Kleikamp <shaggy@kernel.org>
CC: jfs-discussion@lists.sourceforge.net
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-24-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert f2fs to use bdev_open_by_dev/path() and pass the handle around.
CC: Jaegeuk Kim <jaegeuk@kernel.org>
CC: Chao Yu <chao@kernel.org>
CC: linux-f2fs-devel@lists.sourceforge.net
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-23-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert ext4 to use bdev_open_by_dev() and pass the handle around.
CC: linux-ext4@vger.kernel.org
CC: Ted Tso <tytso@mit.edu>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-22-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert erofs to use bdev_open_by_path() and pass the handle around.
CC: Gao Xiang <xiang@kernel.org>
CC: Chao Yu <chao@kernel.org>
CC: linux-erofs@lists.ozlabs.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-21-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert btrfs to use bdev_open_by_path() and pass the handle around. We
also drop the holder from struct btrfs_device as it is now not needed
anymore.
CC: David Sterba <dsterba@suse.com>
CC: linux-btrfs@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-20-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert mount code to use bdev_open_by_dev() and propagate the handle
around to bdev_release().
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-19-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull misc filesystem fixes from Al Viro:
"Assorted fixes all over the place: literally nothing in common, could
have been three separate pull requests.
All are simple regression fixes, but not for anything from this cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
sparc32: fix a braino in fault handling in csum_and_copy_..._user()
|
|
Use of dget() after we'd dropped ->d_lock is too late - dentry might
be gone by that point.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Today we got a report at [1] for rcu stalls on the i915 testsuite in [2]
due to the conversion of files to SLAB_TYPSSAFE_BY_RCU. Afaict,
get_file_rcu() goes into an infinite loop trying to carefully verify
that i915->gem.mmap_singleton hasn't changed - see the splat below.
So I stared at this code to figure out what it actually does. It seems
that the i915->gem.mmap_singleton pointer itself never had rcu semantics.
The i915->gem.mmap_singleton is replaced in
file->f_op->release::singleton_release():
static int singleton_release(struct inode *inode, struct file *file)
{
struct drm_i915_private *i915 = file->private_data;
cmpxchg(&i915->gem.mmap_singleton, file, NULL);
drm_dev_put(&i915->drm);
return 0;
}
The cmpxchg() is ordered against a concurrent update of
i915->gem.mmap_singleton from mmap_singleton(). IOW, when
mmap_singleton() fails to get a reference on i915->gem.mmap_singleton:
While mmap_singleton() does
rcu_read_lock();
file = get_file_rcu(&i915->gem.mmap_singleton);
rcu_read_unlock();
it allocates a new file via anon_inode_getfile() and does
smp_store_mb(i915->gem.mmap_singleton, file);
So, then what happens in the case of this bug is that at some point
fput() is called and drops the file->f_count to zero leaving the pointer
in i915->gem.mmap_singleton in tact.
Now, there might be delays until
file->f_op->release::singleton_release() is called and
i915->gem.mmap_singleton is set to NULL.
Say concurrently another task hits mmap_singleton() and does:
rcu_read_lock();
file = get_file_rcu(&i915->gem.mmap_singleton);
rcu_read_unlock();
When get_file_rcu() fails to get a reference via atomic_inc_not_zero()
it will try the reload from i915->gem.mmap_singleton expecting it to be
NULL, assuming it has comparable semantics as we expect in
__fget_files_rcu().
But it hasn't so it reloads the same pointer again, trying the same
atomic_inc_not_zero() again and doing so until
file->f_op->release::singleton_release() of the old file has been
called.
So, in contrast to __fget_files_rcu() here we want to not retry when
atomic_inc_not_zero() has failed. We only want to retry in case we
managed to get a reference but the pointer did change on reload.
<3> [511.395679] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
<3> [511.395716] rcu: Tasks blocked on level-1 rcu_node (CPUs 0-9): P6238
<3> [511.395934] rcu: (detected by 16, t=65002 jiffies, g=123977, q=439 ncpus=20)
<6> [511.395944] task:i915_selftest state:R running task stack:10568 pid:6238 tgid:6238 ppid:1001 flags:0x00004002
<6> [511.395962] Call Trace:
<6> [511.395966] <TASK>
<6> [511.395974] ? __schedule+0x3a8/0xd70
<6> [511.395995] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
<6> [511.396003] ? lockdep_hardirqs_on+0xc3/0x140
<6> [511.396013] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
<6> [511.396029] ? get_file_rcu+0x10/0x30
<6> [511.396039] ? get_file_rcu+0x10/0x30
<6> [511.396046] ? i915_gem_object_mmap+0xbc/0x450 [i915]
<6> [511.396509] ? i915_gem_mmap+0x272/0x480 [i915]
<6> [511.396903] ? mmap_region+0x253/0xb60
<6> [511.396925] ? do_mmap+0x334/0x5c0
<6> [511.396939] ? vm_mmap_pgoff+0x9f/0x1c0
<6> [511.396949] ? rcu_is_watching+0x11/0x50
<6> [511.396962] ? igt_mmap_offset+0xfc/0x110 [i915]
<6> [511.397376] ? __igt_mmap+0xb3/0x570 [i915]
<6> [511.397762] ? igt_mmap+0x11e/0x150 [i915]
<6> [511.398139] ? __trace_bprintk+0x76/0x90
<6> [511.398156] ? __i915_subtests+0xbf/0x240 [i915]
<6> [511.398586] ? __pfx___i915_live_setup+0x10/0x10 [i915]
<6> [511.399001] ? __pfx___i915_live_teardown+0x10/0x10 [i915]
<6> [511.399433] ? __run_selftests+0xbc/0x1a0 [i915]
<6> [511.399875] ? i915_live_selftests+0x4b/0x90 [i915]
<6> [511.400308] ? i915_pci_probe+0x106/0x200 [i915]
<6> [511.400692] ? pci_device_probe+0x95/0x120
<6> [511.400704] ? really_probe+0x164/0x3c0
<6> [511.400715] ? __pfx___driver_attach+0x10/0x10
<6> [511.400722] ? __driver_probe_device+0x73/0x160
<6> [511.400731] ? driver_probe_device+0x19/0xa0
<6> [511.400741] ? __driver_attach+0xb6/0x180
<6> [511.400749] ? __pfx___driver_attach+0x10/0x10
<6> [511.400756] ? bus_for_each_dev+0x77/0xd0
<6> [511.400770] ? bus_add_driver+0x114/0x210
<6> [511.400781] ? driver_register+0x5b/0x110
<6> [511.400791] ? i915_init+0x23/0xc0 [i915]
<6> [511.401153] ? __pfx_i915_init+0x10/0x10 [i915]
<6> [511.401503] ? do_one_initcall+0x57/0x270
<6> [511.401515] ? rcu_is_watching+0x11/0x50
<6> [511.401521] ? kmalloc_trace+0xa3/0xb0
<6> [511.401532] ? do_init_module+0x5f/0x210
<6> [511.401544] ? load_module+0x1d00/0x1f60
<6> [511.401581] ? init_module_from_file+0x86/0xd0
<6> [511.401590] ? init_module_from_file+0x86/0xd0
<6> [511.401613] ? idempotent_init_module+0x17c/0x230
<6> [511.401639] ? __x64_sys_finit_module+0x56/0xb0
<6> [511.401650] ? do_syscall_64+0x3c/0x90
<6> [511.401659] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
<6> [511.401684] </TASK>
Link: [1]: https://lore.kernel.org/intel-gfx/SJ1PR11MB6129CB39EED831784C331BAFB9DEA@SJ1PR11MB6129.namprd11.prod.outlook.com
Link: [2]: https://intel-gfx-ci.01.org/tree/linux-next/next-20231013/bat-dg2-11/igt@i915_selftest@live@mman.html#dmesg-warnings10963
Cc: Jann Horn <jannh@google.com>,
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231025-formfrage-watscheln-84526cd3bd7d@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We are seeing systemd hang on its autofs direct mount at
/proc/sys/fs/binfmt_misc.
Historically this was due to a mismatch in the communication structure
size between a 64 bit kernel and a 32 bit user space and was fixed by
making the pipe communication record oriented.
During autofs v5 development I decided to stay with the existing usage
instead of changing to a packed structure for autofs <=> user space
communications which turned out to be a mistake on my part.
Problems arose and they were fixed by allowing for the 64 bit to 32
bit size difference in the automount(8) code.
Along the way systemd started to use autofs and eventually encountered
this problem too. systemd refused to compensate for the length
difference insisting it be fixed in the kernel. Fortunately Linus
implemented the packetized pipe which resolved the problem in a
straight forward and simple way.
In the autofs mount api conversion series I inadvertatly dropped the
packet pipe flag settings when adding the autofs_parse_fd() function.
This patch fixes that omission.
Fixes: 546694b8f658 ("autofs: add autofs_parse_fd()")
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/20231023093359.64265-1-raven@themaw.net
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Cc: Bill O'Donnell <bodonnel@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The calling code actually handles -ECHILD, so this BUG_ON
can be converted to WARN_ON_ONCE.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Link: https://lore.kernel.org/r/20231023184718.11143-1-bschubert@ddn.com
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Dharmendra Singh <dsingh@ddn.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull nfsd fix from Al Viro:
"Catch from lock_rename() audit; nfsd_rename() checked that both
directories belonged to the same filesystem, but only after having
done lock_rename().
Trivial fix, tested and acked by nfs folks"
* tag 'pull-nfsd-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: lock_rename() needs both directories to live on the same fs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix for a problem with snapshot of a newly created subvolume
that can lead to inconsistent data under some circumstances. Kernel
6.5 added a performance optimization to skip transaction commit for
subvolume creation but this could end up with newer data on disk but
not linked to other structures.
The fix itself is an added condition, the rest of the patch is a
parameter added to several functions"
* tag 'for-6.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix unwritten extent buffer after snapshotting a new subvolume
|
|
When creating a snapshot of a subvolume that was created in the current
transaction, we can end up not persisting a dirty extent buffer that is
referenced by the snapshot, resulting in IO errors due to checksum failures
when trying to read the extent buffer later from disk. A sequence of steps
that leads to this is the following:
1) At ioctl.c:create_subvol() we allocate an extent buffer, with logical
address 36007936, for the leaf/root of a new subvolume that has an ID
of 291. We mark the extent buffer as dirty, and at this point the
subvolume tree has a single node/leaf which is also its root (level 0);
2) We no longer commit the transaction used to create the subvolume at
create_subvol(). We used to, but that was recently removed in
commit 1b53e51a4a8f ("btrfs: don't commit transaction for every subvol
create");
3) The transaction used to create the subvolume has an ID of 33, so the
extent buffer 36007936 has a generation of 33;
4) Several updates happen to subvolume 291 during transaction 33, several
files created and its tree height changes from 0 to 1, so we end up with
a new root at level 1 and the extent buffer 36007936 is now a leaf of
that new root node, which is extent buffer 36048896.
The commit root remains as 36007936, since we are still at transaction
33;
5) Creation of a snapshot of subvolume 291, with an ID of 292, starts at
ioctl.c:create_snapshot(). This triggers a commit of transaction 33 and
we end up at transaction.c:create_pending_snapshot(), in the critical
section of a transaction commit.
There we COW the root of subvolume 291, which is extent buffer 36048896.
The COW operation returns extent buffer 36048896, since there's no need
to COW because the extent buffer was created in this transaction and it
was not written yet.
The we call btrfs_copy_root() against the root node 36048896. During
this operation we allocate a new extent buffer to turn into the root
node of the snapshot, copy the contents of the root node 36048896 into
this snapshot root extent buffer, set the owner to 292 (the ID of the
snapshot), etc, and then we call btrfs_inc_ref(). This will create a
delayed reference for each leaf pointed by the root node with a
reference root of 292 - this includes a reference for the leaf
36007936.
After that we set the bit BTRFS_ROOT_FORCE_COW in the root's state.
Then we call btrfs_insert_dir_item(), to create the directory entry in
in the tree of subvolume 291 that points to the snapshot. This ends up
needing to modify leaf 36007936 to insert the respective directory
items. Because the bit BTRFS_ROOT_FORCE_COW is set for the root's state,
we need to COW the leaf. We end up at btrfs_force_cow_block() and then
at update_ref_for_cow().
At update_ref_for_cow() we call btrfs_block_can_be_shared() which
returns false, despite the fact the leaf 36007936 is shared - the
subvolume's root and the snapshot's root point to that leaf. The
reason that it incorrectly returns false is because the commit root
of the subvolume is extent buffer 36007936 - it was the initial root
of the subvolume when we created it. So btrfs_block_can_be_shared()
which has the following logic:
int btrfs_block_can_be_shared(struct btrfs_root *root,
struct extent_buffer *buf)
{
if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state) &&
buf != root->node && buf != root->commit_root &&
(btrfs_header_generation(buf) <=
btrfs_root_last_snapshot(&root->root_item) ||
btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)))
return 1;
return 0;
}
Returns false (0) since 'buf' (extent buffer 36007936) matches the
root's commit root.
As a result, at update_ref_for_cow(), we don't check for the number
of references for extent buffer 36007936, we just assume it's not
shared and therefore that it has only 1 reference, so we set the local
variable 'refs' to 1.
Later on, in the final if-else statement at update_ref_for_cow():
static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf,
struct extent_buffer *cow,
int *last_ref)
{
(...)
if (refs > 1) {
(...)
} else {
(...)
btrfs_clear_buffer_dirty(trans, buf);
*last_ref = 1;
}
}
So we mark the extent buffer 36007936 as not dirty, and as a result
we don't write it to disk later in the transaction commit, despite the
fact that the snapshot's root points to it.
Attempting to access the leaf or dumping the tree for example shows
that the extent buffer was not written:
$ btrfs inspect-internal dump-tree -t 292 /dev/sdb
btrfs-progs v6.2.2
file tree key (292 ROOT_ITEM 33)
node 36110336 level 1 items 2 free space 119 generation 33 owner 292
node 36110336 flags 0x1(WRITTEN) backref revision 1
checksum stored a8103e3e
checksum calced a8103e3e
fs uuid 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79
chunk uuid e8c9c885-78f4-4d31-85fe-89e5f5fd4a07
key (256 INODE_ITEM 0) block 36007936 gen 33
key (257 EXTENT_DATA 0) block 36052992 gen 33
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
total bytes 107374182400
bytes used 38572032
uuid 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79
The respective on disk region is full of zeroes as the device was
trimmed at mkfs time.
Obviously 'btrfs check' also detects and complains about this:
$ btrfs check /dev/sdb
Opening filesystem to check...
Checking filesystem on /dev/sdb
UUID: 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79
generation: 33 (33)
[1/7] checking root items
[2/7] checking extents
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
bad tree block 36007936, bytenr mismatch, want=36007936, have=0
owner ref check failed [36007936 4096]
ERROR: errors found in extent allocation tree or chunk allocation
[3/7] checking free space tree
[4/7] checking fs roots
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
bad tree block 36007936, bytenr mismatch, want=36007936, have=0
The following tree block(s) is corrupted in tree 292:
tree block bytenr: 36110336, level: 1, node key: (256, 1, 0)
root 292 root dir 256 not found
ERROR: errors found in fs roots
found 38572032 bytes used, error(s) found
total csum bytes: 16048
total tree bytes: 1265664
total fs tree bytes: 1118208
total extent tree bytes: 65536
btree space waste bytes: 562598
file data blocks allocated: 65978368
referenced 36569088
Fix this by updating btrfs_block_can_be_shared() to consider that an
extent buffer may be shared if it matches the commit root and if its
generation matches the current transaction's generation.
This can be reproduced with the following script:
$ cat test.sh
#!/bin/bash
MNT=/mnt/sdi
DEV=/dev/sdi
# Use a filesystem with a 64K node size so that we have the same node
# size on every machine regardless of its page size (on x86_64 default
# node size is 16K due to the 4K page size, while on PPC it's 64K by
# default). This way we can make sure we are able to create a btree for
# the subvolume with a height of 2.
mkfs.btrfs -f -n 64K $DEV
mount $DEV $MNT
btrfs subvolume create $MNT/subvol
# Create a few empty files on the subvolume, this bumps its btree
# height to 2 (root node at level 1 and 2 leaves).
for ((i = 1; i <= 300; i++)); do
echo -n > $MNT/subvol/file_$i
done
btrfs subvolume snapshot -r $MNT/subvol $MNT/subvol/snap
umount $DEV
btrfs check $DEV
Running it on a 6.5 kernel (or any 6.6-rc kernel at the moment):
$ ./test.sh
Create subvolume '/mnt/sdi/subvol'
Create a readonly snapshot of '/mnt/sdi/subvol' in '/mnt/sdi/subvol/snap'
Opening filesystem to check...
Checking filesystem on /dev/sdi
UUID: bbdde2ff-7d02-45ca-8a73-3c36f23755a1
[1/7] checking root items
[2/7] checking extents
parent transid verify failed on 30539776 wanted 7 found 5
parent transid verify failed on 30539776 wanted 7 found 5
parent transid verify failed on 30539776 wanted 7 found 5
Ignoring transid failure
owner ref check failed [30539776 65536]
ERROR: errors found in extent allocation tree or chunk allocation
[3/7] checking free space tree
[4/7] checking fs roots
parent transid verify failed on 30539776 wanted 7 found 5
Ignoring transid failure
Wrong key of child node/leaf, wanted: (256, 1, 0), have: (2, 132, 0)
Wrong generation of child node/leaf, wanted: 5, have: 7
root 257 root dir 256 not found
ERROR: errors found in fs roots
found 917504 bytes used, error(s) found
total csum bytes: 0
total tree bytes: 851968
total fs tree bytes: 393216
total extent tree bytes: 65536
btree space waste bytes: 736550
file data blocks allocated: 0
referenced 0
A test case for fstests will follow soon.
Fixes: 1b53e51a4a8f ("btrfs: don't commit transaction for every subvol create")
CC: stable@vger.kernel.org # 6.5+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull iomap fix from Darrick Wong:
- Fix a bug where a writev consisting of a bunch of sub-fsblock writes
where the last buffer address is invalid could lead to an infinite
loop
* tag 'iomap-6.6-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: fix short copy in iomap_write_iter()
|
|
Pull NFS client fixes from Anna Schumaker:
"Stable Fix:
- Fix a pNFS hang in nfs4_evict_inode()
Fixes:
- Force update of suid/sgid bits after an NFS v4.2 ALLOCATE op
- Fix a potential oops in nfs_inode_remove_request()
- Check the validity of the layout pointer in ff_layout_mirror_prepare_stats()
- Fix incorrectly marking the pNFS MDS with USE_PNFS_DS in some cases"
* tag 'nfs-for-6.6-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.1: fixup use EXCHGID4_FLAG_USE_PNFS_DS for DS server
pNFS/flexfiles: Check the layout validity in ff_layout_mirror_prepare_stats
pNFS: Fix a hang in nfs4_evict_inode()
NFS: Fix potential oops in nfs_inode_remove_request()
nfs42: client needs to strip file mode's suid/sgid bit after ALLOCATE op
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fanotify fix from Jan Kara:
"Disable superblock / mount marks for filesystems that can encode file
handles but not open them (currently only overlayfs).
It is not clear the functionality is useful in any way so let's better
disable it before someone comes up with some creative misuse"
* tag 'fsnotify_for_v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: limit reporting of event with non-decodeable file handles
|
|
Starting with commit 5d8edfb900d5 ("iomap: Copy larger chunks from
userspace"), iomap_write_iter() can get into endless loop. This can
be reproduced with LTP writev07 which uses partially valid iovecs:
struct iovec wr_iovec[] = {
{ buffer, 64 },
{ bad_addr, 64 },
{ buffer + 64, 64 },
{ buffer + 64 * 2, 64 },
};
commit bc1bb416bbb9 ("generic_perform_write()/iomap_write_actor():
saner logics for short copy") previously introduced the logic, which
made short copy retry in next iteration with amount of "bytes" it
managed to copy:
if (unlikely(status == 0)) {
/*
* A short copy made iomap_write_end() reject the
* thing entirely. Might be memory poisoning
* halfway through, might be a race with munmap,
* might be severe memory pressure.
*/
if (copied)
bytes = copied;
However, since 5d8edfb900d5 "bytes" is no longer carried into next
iteration, because it is now always initialized at the beginning of
the loop. And for iov_iter_count < PAGE_SIZE, "bytes" ends up with
same value as previous iteration, making the loop retry same copy
over and over, which leads to writev07 testcase hanging.
Make next iteration retry with amount of bytes we managed to copy.
Fixes: 5d8edfb900d5 ("iomap: Copy larger chunks from userspace")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fix from Christian Brauner:
"An openat() call from io_uring triggering an audit call can apparently
cause the refcount of struct filename to be incremented from multiple
threads concurrently during async execution, triggering a refcount
underflow and hitting a BUG_ON(). That bug has been lurking around
since at least v5.16 apparently.
Switch to an atomic counter to fix that. The underflow check is
downgraded from a BUG_ON() to a WARN_ON_ONCE() but we could easily
remove that check altogether tbh"
* tag 'v6.6-rc7.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
audit,io_uring: io_uring openat triggers audit reference count underflow
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 fixes from Konstantin Komarov:
- memory leak
- some logic errors, NULL dereferences
- some code was refactored
- more sanity checks
* tag 'ntfs3_for_6.6' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Avoid possible memory leak
fs/ntfs3: Fix directory element type detection
fs/ntfs3: Fix possible null-pointer dereference in hdr_find_e()
fs/ntfs3: Fix OOB read in ntfs_init_from_boot
fs/ntfs3: fix panic about slab-out-of-bounds caused by ntfs_list_ea()
fs/ntfs3: Fix NULL pointer dereference on error in attr_allocate_frame()
fs/ntfs3: Fix possible NULL-ptr-deref in ni_readpage_cmpr()
fs/ntfs3: Do not allow to change label if volume is read-only
fs/ntfs3: Add more info into /proc/fs/ntfs3/<dev>/volinfo
fs/ntfs3: Refactoring and comments
fs/ntfs3: Fix alternative boot searching
fs/ntfs3: Allow repeated call to ntfs3_put_sbi
fs/ntfs3: Use inode_set_ctime_to_ts instead of inode_set_ctime
fs/ntfs3: Fix shift-out-of-bounds in ntfs_fill_super
fs/ntfs3: fix deadlock in mark_as_free_ex
fs/ntfs3: Add more attributes checks in mi_enum_attr()
fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)
fs/ntfs3: Write immediately updated ntfs state
fs/ntfs3: Add ckeck in ni_update_parent()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Fix a bug in chunk size decision that could lead to suboptimal
placement and filling patterns"
* tag 'for-6.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix stripe length calculation for non-zoned data chunk allocation
|
|
Commit a95aef69a740 ("fanotify: support reporting non-decodeable file
handles") merged in v6.5-rc1, added the ability to use an fanotify group
with FAN_REPORT_FID mode to watch filesystems that do not support nfs
export, but do know how to encode non-decodeable file handles, with the
newly introduced AT_HANDLE_FID flag.
At the time that this commit was merged, there were no filesystems
in-tree with those traits.
Commit 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles"),
merged in v6.6-rc1, added this trait to overlayfs, thus allowing fanotify
watching of overlayfs with FAN_REPORT_FID mode.
In retrospect, allowing an fanotify filesystem/mount mark on such
filesystem in FAN_REPORT_FID mode will result in getting events with
file handles, without the ability to resolve the filesystem objects from
those file handles (i.e. no open_by_handle_at() support).
For v6.6, the safer option would be to allow this mode for inode marks
only, where the caller has the opportunity to use name_to_handle_at() at
the time of setting the mark. In the future we can revise this decision.
Fixes: a95aef69a740 ("fanotify: support reporting non-decodeable file handles")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20231018100000.2453965-2-amir73il@gmail.com>
|
|
The cgwb cleanup routine will try to release the dying cgwb by switching
the attached inodes. It fetches the attached inodes from wb->b_attached
list, omitting the fact that inodes only with dirty timestamps reside in
wb->b_dirty_time list, which is the case when lazytime is enabled. This
causes enormous zombie memory cgroup when lazytime is enabled, as inodes
with dirty timestamps can not be switched to a live cgwb for a long time.
It is reasonable not to switch cgwb for inodes with dirty data, as
otherwise it may break the bandwidth restrictions. However since the
writeback of inode metadata is not accounted for, let's also switch
inodes with dirty timestamps to avoid zombie memory and block cgroups
when laztytime is enabled.
Fixes: c22d70a162d3 ("writeback, cgroup: release dying cgwbs by switching attached inodes")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231014125511.102978-1-jefflexu@linux.alibaba.com
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
try_module_get(NULL) is true, so there is no need to check owner being
NULL.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231013132441.1406200-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In commit f61b9bb3f838 ("fs: add a new SB_I_NOUMASK flag") we added a
new SB_I_NOUMASK flag that is used by filesystems like NFS to indicate
that umask stripping is never supposed to be done in the vfs independent
of whether or not POSIX ACLs are supported.
Overlayfs falls into the same category as it raises SB_POSIXACL
unconditionally to defer umask application to the upper filesystem.
Now that we have SB_I_NOUMASK use that and make SB_POSIXACL properly
conditional on whether or not the kernel does have support for it. This
will enable use to turn IS_POSIXACL() into nop on kernels that don't
have POSIX ACL support avoding bugs from missed umask stripping.
Link: https://lore.kernel.org/r/20231012-einband-uferpromenade-80541a047a1f@brauner
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A backing file struct stores two path's, one "real" path that is referring
to f_inode and one "fake" path, which should be displayed to users in
/proc/<pid>/maps.
There is a lot more potential code that needs to know the "real" path, then
code that needs to know the "fake" path.
Instead of code having to request the "real" path with file_real_path(),
store the "real" path in f_path and require code that needs to know the
"fake" path request it with file_user_path().
Replace the file_real_path() helper with a simple const accessor f_path().
After this change, file_dentry() is not expected to observe any files
with overlayfs f_path and real f_inode, so the call to ->d_real() should
not be needed. Leave the ->d_real() call for now and add an assertion
in ovl_d_real() to catch if we made wrong assumptions.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpegtt48eXhhjDFA1ojcHPNKj3Go6joryCPtEFAKpocyBsnw@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231009153712.1566422-4-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Overlayfs uses backing files with "fake" overlayfs f_path and "real"
underlying f_inode, in order to use underlying inode aops for mapped
files and to display the overlayfs path in /proc/<pid>/maps.
In preparation for storing the overlayfs "fake" path instead of the
underlying "real" path in struct backing_file, define a noop helper
file_user_path() that returns f_path for now.
Use the new helper in procfs and kernel logs whenever a path of a
mapped file is displayed to users.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231009153712.1566422-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A writeable mapped backing file can perform writes to the real inode.
Therefore, the real path mount must be kept writable so long as the
writable map exists.
This may not be strictly needed for ovelrayfs private upper mount,
but it is correct to take the mnt_writers count in the vfs helper.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231009153712.1566422-2-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
So happens it already was not doing it, but there is no need to "hope"
as indicated in the comment.
No changes in generated assembly.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20231004111916.728135-3-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Backing files as used by overlayfs are never installed into file
descriptor tables and are explicitly documented as such. They aren't
subject to rcu access conditions like regular files are.
Their lifetime is bound to the lifetime of the overlayfs file, i.e.,
they're stashed in ovl_file->private_data and go away otherwise. If
they're set as vma->vm_file - which is their main purpose - then they're
subject to regular refcount rules and vma->vm_file can't be installed
into an fdtable after having been set. All in all I don't see any need
for rcu delay here. So free it directly.
This all hinges on such hybrid beasts to never actually be installed
into fdtables which - as mentioned before - is not allowed. So add an
explicit WARN_ON_ONCE() so we catch any case where someone is suddenly
trying to install one of those things into a file descriptor table so we
can have a nice long chat with them.
Link: https://lore.kernel.org/r/20231005-sakralbau-wappnen-f5c31755ed70@brauner
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In recent discussions around some performance improvements in the file
handling area we discussed switching the file cache to rely on
SLAB_TYPESAFE_BY_RCU which allows us to get rid of call_rcu() based
freeing for files completely. This is a pretty sensitive change overall
but it might actually be worth doing.
The main downside is the subtlety. The other one is that we should
really wait for Jann's patch to land that enables KASAN to handle
SLAB_TYPESAFE_BY_RCU UAFs. Currently it doesn't but a patch for this
exists.
With SLAB_TYPESAFE_BY_RCU objects may be freed and reused multiple times
which requires a few changes. So it isn't sufficient anymore to just
acquire a reference to the file in question under rcu using
atomic_long_inc_not_zero() since the file might have already been
recycled and someone else might have bumped the reference.
In other words, callers might see reference count bumps from newer
users. For this reason it is necessary to verify that the pointer is the
same before and after the reference count increment. This pattern can be
seen in get_file_rcu() and __files_get_rcu().
In addition, it isn't possible to access or check fields in struct file
without first aqcuiring a reference on it. Not doing that was always
very dodgy and it was only usable for non-pointer data in struct file.
With SLAB_TYPESAFE_BY_RCU it is necessary that callers first acquire a
reference under rcu or they must hold the files_lock of the fdtable.
Failing to do either one of this is a bug.
Thanks to Jann for pointing out that we need to ensure memory ordering
between reallocations and pointer check by ensuring that all subsequent
loads have a dependency on the second load in get_file_rcu() and
providing a fixup that was folded into this patch.
Cc: Jann Horn <jannh@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Failed opens (mostly ENOENT) legitimately happen a lot, for example here
are stats from stracing kernel build for few seconds (strace -fc make):
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ------------------
0.76 0.076233 5 15040 3688 openat
(this is tons of header files tried in different paths)
In the common case of there being nothing to close (only the file object
to free) there is a lot of overhead which can be avoided.
This is most notably delegation of freeing to task_work, which comes
with an enormous cost (see 021a160abf62 ("fs: use __fput_sync in
close(2)" for an example).
Benchmarked with will-it-scale with a custom testcase based on
tests/open1.c, stuffed into tests/openneg.c:
[snip]
while (1) {
int fd = open("/tmp/nonexistent", O_RDONLY);
assert(fd == -1);
(*iterations)++;
}
[/snip]
Sapphire Rapids, openneg_processes -t 1 (ops/s):
before: 1950013
after: 2914973 (+49%)
file refcount is checked as a safety belt against buggy consumers with
an atomic cmpxchg. Technically it is not necessary, but it happens to
not be measurable due to several other atomics which immediately follow.
Optmizing them away to make this atomic into a problem is left as an
exercise for the reader.
v2:
- unexport fput_badopen and move to fs/internal.h
- handle the refcount with cmpxchg, adjust commentary accordingly
- tweak the commit message
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20230926162228.68666-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Because 'inode' is being initialised before checking if 'dentry' is negative
it looks like an extra iput() on 'inode' may happen since the ihold() is
done only if the dentry is *not* negative. In reality this doesn't happen
because d_is_negative() is never true if ->d_inode is NULL. This patch only
makes the code easier to understand, as I was initially mislead by it.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20230928152341.303-1-lhenriques@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If there is no watch_queue, holding the pipe mutex is enough to
prevent concurrent writes, and we can avoid the spinlock.
O_NOTIFICATION_QUEUE is an exotic and rarely used feature, and of all
the pipes that exist at any given time, only very few actually have a
watch_queue, therefore it appears worthwile to optimize the common
case.
This patch does not optimize pipe_resize_ring() where the spinlocks
could be avoided as well; that does not seem like a worthwile
optimization because this function is not called often.
Related commits:
- commit 8df441294dd3 ("pipe: Check for ring full inside of the
spinlock in pipe_write()")
- commit b667b8673443 ("pipe: Advance tail pointer inside of wait
spinlock in pipe_read()")
- commit 189b0ddc2451 ("pipe: Fix missing lock in pipe_resize_ring()")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-4-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This reverts commit 8df441294dd3 ("pipe: Check for ring full inside of
the spinlock in pipe_write()") which was obsoleted by commit
c73be61cede ("pipe: Add general notification queue support") because
now pipe_write() fails early with -EXDEV if there is a watch_queue.
Without a watch_queue, no notifications can be posted to the pipe and
mutex protection is enough, as can be seen in splice_pipe_to_pipe()
which does not use the spinlock either.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-3-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This declutters the code by reducing the number of #ifdefs and makes
the watch_queue checks simpler. This has no runtime effect; the
machine code is identical.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-2-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
SB_POSIXACL must be set when a filesystem supports POSIX ACLs, but NFSv4
also sets this flag to prevent the VFS from applying the umask on
newly-created files. NFSv4 doesn't support POSIX ACLs however, which
causes confusion when other subsystems try to test for them.
Add a new SB_I_NOUMASK flag that allows filesystems to opt-in to umask
stripping without advertising support for POSIX ACLs. Set the new flag
on NFSv4 instead of SB_POSIXACL.
Also, move mode_strip_umask to namei.h and convert init_mknod and
init_mkdir to use it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230911-acl-fix-v3-1-b25315333f6c@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This patches fixes commit 51d674a5e488 "NFSv4.1: use
EXCHGID4_FLAG_USE_PNFS_DS for DS server", purpose of that
commit was to mark EXCHANGE_ID to the DS with the appropriate
flag.
However, connection to MDS can return both EXCHGID4_FLAG_USE_PNFS_DS
and EXCHGID4_FLAG_USE_PNFS_MDS set but previous patch would only
remember the USE_PNFS_DS and for the 2nd EXCHANGE_ID send that
to the MDS.
Instead, just mark the pnfs path exclusively.
Fixes: 51d674a5e488 ("NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Ensure that we check the layout pointer and validity after dereferencing
it in ff_layout_mirror_prepare_stats.
Fixes: 08e2e5bc6c9a ("pNFS/flexfiles: Clean up layoutstats")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We are not allowed to call pnfs_mark_matching_lsegs_return() without
also holding a reference to the layout header, since doing so could lead
to the reference count going to zero when we call
pnfs_layout_remove_lseg(). This again can lead to a hang when we get to
nfs4_evict_inode() and are unable to clear the layout pointer.
pnfs_layout_return_unused_byserver() is guilty of this behaviour, and
has been seen to trigger the refcount warning prior to a hang.
Fixes: b6d49ecd1081 ("NFSv4: Fix a pNFS layout related use-after-free race when freeing the inode")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|