| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull kernfs bugfix and documentation update from Greg KH:
"Here are two changes for 6.9-rc5 that deal with "driver core" stuff,
that do the following:
- sysfs reference leak fix
- embargoed-hardware-issues.rst update for Power
Both of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for Power
fs: sysfs: Fix reference leak in sysfs_break_active_protection()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull fs/9p fixes from Eric Van Hensbergen:
"This contains a reversion of one of the original 6.9 patches which
seems to have been the cause of most of the instability. It also
incorporates several fixes to legacy support and cache fixes.
There are few additional changes to improve stability, but I want
another week of testing before sending them upstream"
* tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: drop inodes immediately on non-.L too
fs/9p: Revert "fs/9p: fix dups even in uncached mode"
fs/9p: remove erroneous nlink init from legacy stat2inode
9p: explicitly deny setlease attempts
fs/9p: fix the cache always being enabled on files with qid flags
fs/9p: translate O_TRUNC into OTRUNC
fs/9p: only translate RWX permissions for plain 9P2000
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix two bugs in the new passthrough mode
- Fix a statx bug introduced in v6.6
- Fix code documentation
* tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
cuse: add kernel-doc comments to cuse_process_init_reply()
fuse: fix leaked ENOSYS error on first statx call
fuse: fix parallel dio write on file open in passthrough mode
fuse: fix wrong ff->iomode state changes from parallel dio write
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"15 hotfixes. 9 are cc:stable and the remainder address post-6.8 issues
or aren't considered suitable for backporting.
There are a significant number of fixups for this cycle's page_owner
changes (series "page_owner: print stacks and their outstanding
allocations"). Apart from that, singleton changes all over, mainly in
MM"
* tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix OOB in nilfs_set_de_type
MAINTAINERS: update Naoya Horiguchi's email address
fork: defer linking file vma until vma is fully initialized
mm/shmem: inline shmem_is_huge() for disabled transparent hugepages
mm,page_owner: defer enablement of static branch
Squashfs: check the inode number is not the invalid value of zero
mm,swapops: update check in is_pfn_swap_entry for hwpoison entries
mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled
mm/userfaultfd: allow hugetlb change protection upon poison entry
mm,page_owner: fix printing of stack records
mm,page_owner: fix accounting of pages when migrating
mm,page_owner: fix refcount imbalance
mm,page_owner: update metadata for tail pages
userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE
mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixup in zoned mode for out-of-order writes of metadata that are no
longer necessary, this used to be tracked in a separate list but now
the old locaion needs to be zeroed out, also add assertions
- fix bulk page allocation retry, this may stall after first failure
for compression read/write
* tag 'for-6.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: do not wait for short bulk allocation
btrfs: zoned: add ASSERT and WARN for EXTENT_BUFFER_ZONED_ZEROOUT handling
btrfs: zoned: do not flag ZEROOUT on non-dirty extent buffer
|
|
The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is
defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function,
which uses this array, specifies the index to read from the array in the
same way as "(mode & S_IFMT) >> S_SHIFT".
static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode
*inode)
{
umode_t mode = inode->i_mode;
de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob
}
However, when the index is determined this way, an out-of-bounds (OOB)
error occurs by referring to an index that is 1 larger than the array size
when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a
patch to resize the nilfs_type_by_mode array should be applied to prevent
OOB errors.
Link: https://lkml.kernel.org/r/20240415182048.7144-1-konishi.ryusuke@gmail.com
Reported-by: syzbot+2e22057de05b9f3b30d8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e22057de05b9f3b30d8
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syskiller has produced an out of bounds access in fill_meta_index().
That out of bounds access is ultimately caused because the inode
has an inode number with the invalid value of zero, which was not checked.
The reason this causes the out of bounds access is due to following
sequence of events:
1. Fill_meta_index() is called to allocate (via empty_meta_index())
and fill a metadata index. It however suffers a data read error
and aborts, invalidating the newly returned empty metadata index.
It does this by setting the inode number of the index to zero,
which means unused (zero is not a valid inode number).
2. When fill_meta_index() is subsequently called again on another
read operation, locate_meta_index() returns the previous index
because it matches the inode number of 0. Because this index
has been returned it is expected to have been filled, and because
it hasn't been, an out of bounds access is performed.
This patch adds a sanity check which checks that the inode number
is not zero when the inode is created and returns -EINVAL if it is.
[phillip@squashfs.org.uk: whitespace fix]
Link: https://lkml.kernel.org/r/20240409204723.446925-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20240408220206.435788-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: "Ubisectech Sirius" <bugreport@ubisectech.com>
Closes: https://lore.kernel.org/lkml/87f5c007-b8a5-41ae-8b57-431e924c5915.bugreport@ubisectech.com/
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a potential tracepoint crash
- Fix NFSv4 GETATTR on big-endian platforms
* tag 'nfsd-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix endianness issue in nfsd4_encode_fattr4
SUNRPC: Fix rpcgss_context trace event acceptor field
|
|
Pull yet more bcachefs fixes from Kent Overstreet:
"This gets recovery working again for the affected user I've been
working with, and I'm still waiting to hear back on other bug reports
but should fix it for everyone else who's been having issues with
recovery.
- Various recovery fixes:
- fixes for the btree_insert_entry being resized on path
allocation btree_path array recently became dynamically
resizable, and btree_insert_entry along with it; this was being
observed during journal replay, when write buffer btree updates
don't use the write buffer and instead use the normal btree
update path
- multiple fixes for deadlock in recovery when we need to do lots
of btree node merges; excessive merges were clocking up the
whole pipeline
- write buffer path now correctly does btree node merges when
needed
- fix failure to go RW when superblock indicates recovery passes
needed (i.e. to complete an unfinished upgrade)
- Various unsafety fixes - test case contributed by a user who had
two drives out of a six drive array write out a whole bunch of
garbage after power failure
- New (tiny) on disk format feature: since it appears the btree node
scan tool will be a more regular thing (crappy hardware, user
error) - this adds a 64 bit per-device bitmap of regions that have
ever had btree nodes.
- A path->should_be_locked fix, from a larger patch series tightening
up invariants and assertions around btree transaction and path
locking state.
This particular fix prevents us from keeping around btree_paths
that are no longer needed"
* tag 'bcachefs-2024-04-15' of https://evilpiepirate.org/git/bcachefs: (24 commits)
bcachefs: set_btree_iter_dontneed also clears should_be_locked
bcachefs: fix error path of __bch2_read_super()
bcachefs: Check for backpointer bucket_offset >= bucket size
bcachefs: bch_member.btree_allocated_bitmap
bcachefs: sysfs internal/trigger_journal_flush
bcachefs: Fix bch2_btree_node_fill() for !path
bcachefs: add safety checks in bch2_btree_node_fill()
bcachefs: Interior known are required to have known key types
bcachefs: add missing bounds check in __bch2_bkey_val_invalid()
bcachefs: Fix btree node merging on write buffer btrees
bcachefs: Disable merges from interior update path
bcachefs: Run merges at BCH_WATERMARK_btree
bcachefs: Fix missing write refs in fs fio paths
bcachefs: Fix deadlock in journal replay
bcachefs: Go rw if running any explicit recovery passes
bcachefs: Standardize helpers for printing enum strs with bounds checks
bcachefs: don't queue btree nodes for rewrites during scan
bcachefs: fix race in bch2_btree_node_evict()
bcachefs: fix unsafety in bch2_stripe_to_text()
bcachefs: fix unsafety in bch2_extent_ptr_to_text()
...
|
|
This is part of a larger series cleaning up the semantics of
should_be_locked and adding assertions around it; if we don't need an
iterator/path anymore, it clearly doesn't need to be locked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In __bch2_read_super(), if kstrdup() fails, it needs to release memory
in sb->holder, fix to call bch2_free_super() in the error path.
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This commit adds kernel-doc style comments with complete parameter
descriptions for the function cuse_process_init_reply.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
FUSE attempts to detect server support for statx by trying it once and
setting no_statx=1 if it fails with ENOSYS, but consider the following
scenario:
- Userspace (e.g. sh) calls stat() on a file
* succeeds
- Userspace (e.g. lsd) calls statx(BTIME) on the same file
- request_mask = STATX_BASIC_STATS | STATX_BTIME
- first pass: sync=true due to differing cache_mask
- statx fails and returns ENOSYS
- set no_statx and retry
- retry sets mask = STATX_BASIC_STATS
- now mask == cache_mask; sync=false (time_before: still valid)
- so we take the "else if (stat)" path
- "err" is still ENOSYS from the failed statx call
Fix this by zeroing "err" before retrying the failed call.
Fixes: d3045530bdd2 ("fuse: implement statx")
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Danny Lin <danny@orbstack.dev>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Parallel dio write takes a negative refcount of fi->iocachectr and so does
open of file in passthrough mode.
The refcount of passthrough mode is associated with attach/detach of a
fuse_backing object to fuse inode.
For parallel dio write, the backing file is irrelevant, so the call to
fuse_inode_uncached_io_start() passes a NULL fuse_backing object.
Passing a NULL fuse_backing will result in false -EBUSY error if the file
is already open in passthrough mode.
Allow taking negative fi->iocachectr refcount with NULL fuse_backing,
because it does not conflict with an already attached fuse_backing object.
Fixes: 4a90451bbc7f ("fuse: implement open in passthrough mode")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There is a confusion with fuse_file_uncached_io_{start,end} interface.
These helpers do two things when called from passthrough open()/release():
1. Take/drop negative refcount of fi->iocachectr (inode uncached io mode)
2. State change ff->iomode IOM_NONE <-> IOM_UNCACHED (file uncached open)
The calls from parallel dio write path need to take a reference on
fi->iocachectr, but they should not be changing ff->iomode state, because
in this case, the fi->iocachectr reference does not stick around until file
release().
Factor out helpers fuse_inode_uncached_io_{start,end}, to be used from
parallel dio write path and rename fuse_file_*cached_io_{start,end} helpers
to fuse_file_*cached_io_{open,release} to clarify the difference.
Fixes: 205c1d802683 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a small (64 bit) per-device bitmap that tracks ranges that
have btree nodes, for accelerating btree node scan if it is ever needed.
- New helpers, bch2_dev_btree_bitmap_marked() and
bch2_dev_bitmap_mark(), for checking and updating the bitmap
- Interior btree update path updates the bitmaps when required
- The check_allocations pass has a new fsck_err check,
btree_bitmap_not_marked
- New on disk format version, mi_btree_mitmap, which indicates the new
bitmap is present
- Upgrade table lists the required recovery pass and expected fsck error
- Btree node scan uses the bitmap to skip ranges if we're on the new
version
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a sysfs knob for immediately flushing the entire journal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We shouldn't be doing the unlock/relock dance when we're not using a
path - this fixes an assertion pop when called from btree node scan.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For forwards compatibilyt, we allow bkeys of unknown type in leaf nodes;
we can simply ignore metadata we don't understand. Pointers to btree
nodes must always be of known types, howwever.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull sysfs fix from Al Viro:
"Get rid of lockdep false positives around sysfs/overlayfs
syzbot has uncovered a class of lockdep false positives for setups
with sysfs being one of the backing layers in overlayfs. The root
cause is that of->mutex allocated when opening a sysfs file read-only
(which overlayfs might do) is confused with of->mutex of a file opened
writable (held in write to sysfs file, which overlayfs won't do).
Assigning them separate lockdep classes fixes that bunch and it's
obviously safe"
* tag 'pull-sysfs-annotation-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kernfs: annotate different lockdep class for of->mutex of writable files
|
|
The writable file /sys/power/resume may call vfs lookup helpers for
arbitrary paths and readonly files can be read by overlayfs from vfs
helpers when sysfs is a lower layer of overalyfs.
To avoid a lockdep warning of circular dependency between overlayfs
inode lock and kernfs of->mutex, use a different lockdep class for
writable and readonly kernfs files.
Reported-by: syzbot+9a5b0ced8b1bfb238b56@syzkaller.appspotmail.com
Fixes: 0fedefd4c4e3 ("kernfs: sysfs: support custom llseek method for sysfs entries")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The btree write buffer flush fastpath that avoids the main transaction
commit path had the unfortunate side effect of not doing btree node
merging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There's been a bug in the btree write buffer where it wasn't triggering
btree node merges - and leaving behind a bunch of nearly empty btree
nodes.
Then during journal replay, when updates to the backpointers btree
aren't using the btree write buffer (because we require synchronization
with journal replay), we end up doing those merges all at once.
Then if it's the interior update path running them, we deadlock because
those run with the highest watermark.
There's no real need for the interior update path to be doing btree node
merges; other code paths can handle that at lower watermarks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a deadlock where the interior update path during journal
replay ends up doing a ton of merges on the backpointers btree, and
deadlocking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_journal_flush_seq requires us to have a write ref
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_key_can_insert_cached() should be checking the watermark -
BCH_TRANS_COMMIT_journal_replay really means nonblocking mode when
watermark < reclaim, it was being used incorrectly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a bug where we fail to start when upgrading/downgrading
because we forgot we needed to go rw.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
many nodes found during scan will be old nodes, overwritten by newer
nodes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
.to_text() functions need to work on key values that didn't pass .valid
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Need to check if we have a valid bucket before checking if ptr is stale
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
add missing validation; fixes assertion pop in bkey unpack
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The btree paths array is now dynamically resizable - and as well the
btree_insert_entries array, as it needs to be the same size.
The merge path (and interior update path) allocates new btree paths,
thus can trigger a resize; thus we need to not retain direct pointers
after invoking merge; similarly when running btree node triggers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- Suppress a coccicheck warning using str_plural()
* tag 'zonefs-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Use str_plural() to fix Coccinelle warning
|
|
Pull smb client fixes from Steve French:
- fix for oops in cifs_get_fattr of deleted files
- fix for the remote open counter going negative in some directory
lease cases
- fix for mkfifo to instantiate dentry to avoid possible crash
- important fix to allow handling key rotation for mount and remount
(ie cases that are becoming more common when password that was used
for the mount will expire soon but will be replaced by new password)
* tag 'v6.9-rc3-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix broken reconnect when password changing on the server by allowing password rotation
smb: client: instantiate when creating SFU files
smb3: fix Open files on server counter going negative
smb: client: fix NULL ptr deref in cifs_mark_open_handles_for_deleted_file()
|
|
Pull ceph fixes from Ilya Dryomov:
"Two CephFS fixes marked for stable and a MAINTAINERS update"
* tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-client:
MAINTAINERS: remove myself as a Reviewer for Ceph
ceph: switch to use cap_delay_lock for the unlink delay list
ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the buffer_percent accounting as it is dependent on three
variables:
1) pages_read - number of subbuffers read
2) pages_lost - number of subbuffers lost due to overwrite
3) pages_touched - number of pages that a writer entered
These three counters only increment, and to know how many active
pages there are on the buffer at any given time, the pages_read and
pages_lost are subtracted from pages_touched.
But the pages touched was incremented whenever any writer went to the
next subbuffer even if it wasn't the only one, so it was incremented
more than it should be causing the counter for how many subbuffers
currently have content incorrect, which caused the buffer_percent
that holds waiters until the ring buffer is filled to a given
percentage to wake up early.
- Fix warning of unused functions when PERF_EVENTS is not configured in
- Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE
- Fix to some kerneldoc function comments in eventfs code.
* tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Only update pages_touched when a new page is touched
tracing: hide unused ftrace_event_id_fops
tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry
eventfs: Fix kernel-doc comments to functions
|
|
It turns out - btree splits happen with the rest of the transaction
still locked, to avoid unnecessary restarts, which means using nofail
doesn't work here - we can deadlock.
Fortunately, we now have the ability to return errors here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
|
|
This reverts commit be57855f505003c5cafff40338d5d0f23b00ba4d.
It caused a regression involving duplicate inode numbers in
some tester trees. The bad behavior seems to be dependent on inode
reuse policy in underlying file system, so it did not trigger in my
test setup.
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
|
|
This commit fix kernel-doc style comments with complete parameter
descriptions for the lookup_file(),lookup_dir_entry() and
lookup_file_dentry().
Link: https://lore.kernel.org/linux-trace-kernel/20240322062604.28862-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
password rotation
There are various use cases that are becoming more common in which password
changes are scheduled on a server(s) periodically but the clients connected
to this server need to stay connected (even in the face of brief network
reconnects) due to mounts which can not be easily unmounted and mounted at
will, and servers that do password rotation do not always have the ability
to tell the clients exactly when to the new password will be effective,
so add support for an alt password ("password2=") on mount (and also
remount) so that we can anticipate the upcoming change to the server
without risking breaking existing mounts.
An alternative would have been to use the kernel keyring for this but the
processes doing the reconnect do not have access to the keyring but do
have access to the ses structure.
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In cifs_sfu_make_node(), on success, instantiate rather than leave it
with dentry unhashed negative to support callers that expect mknod(2)
to always instantiate.
This fixes the following test case:
mount.cifs //srv/share /mnt -o ...,sfu
mkfifo /mnt/fifo
./xfstests/ltp/growfiles -b -W test -e 1 -u -i 0 -L 30 /mnt/fifo
...
BUG: unable to handle page fault for address: 000000034cec4e58
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 1 PREEMPT SMP PTI
CPU: 0 PID: 138098 Comm: growfiles Kdump: loaded Not tainted
5.14.0-436.3987_1240945149.el9.x86_64 #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:_raw_callee_save__kvm_vcpu_is_preempted+0x0/0x20
Code: e8 15 d9 61 00 e9 63 ff ff ff 41 bd ea ff ff ff e9 58 ff ff ff e8
d0 71 c0 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <48> 8b 04
fd 60 2b c1 99 80 b8 90 50 03 00 00 0f 95 c0 c3 cc cc cc
RSP: 0018:ffffb6a143cf7cf8 EFLAGS: 00010206
RAX: ffff8a9bc30fb038 RBX: ffff8a9bc666a200 RCX: ffff8a9cc0260000
RDX: 00000000736f622e RSI: ffff8a9bc30fb038 RDI: 000000007665645f
RBP: ffffb6a143cf7d70 R08: 0000000000001000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff8a9bc666a200
R13: 0000559a302a12b0 R14: 0000000000001000 R15: 0000000000000000
FS: 00007fbed1dbb740(0000) GS:ffff8a9cf0000000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000034cec4e58 CR3: 0000000128ec6006 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? __mutex_lock.constprop.0+0x5f7/0x6a0
? __die_body.cold+0x8/0xd
? page_fault_oops+0x134/0x170
? exc_page_fault+0x62/0x150
? asm_exc_page_fault+0x22/0x30
? _pfx_raw_callee_save__kvm_vcpu_is_preempted+0x10/0x10
__mutex_lock.constprop.0+0x5f7/0x6a0
? __mod_memcg_lruvec_state+0x84/0xd0
pipe_write+0x47/0x650
? do_anonymous_page+0x258/0x410
? inode_security+0x22/0x60
? selinux_file_permission+0x108/0x150
vfs_write+0x2cb/0x410
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0xf0
? syscall_exit_to_user_mode+0x22/0x40
? do_syscall_64+0x6b/0xf0
? sched_clock_cpu+0x9/0xc0
? exc_page_fault+0x62/0x150
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Cc: stable@vger.kernel.org
Fixes: 72bc63f5e23a ("smb3: fix creating FIFOs when mounting with "sfu" mount option")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We were decrementing the count of open files on server twice
for the case where we were closing cached directories.
Fixes: 8e843bf38f7b ("cifs: return a single-use cfid if we did not get a lease")
Cc: stable@vger.kernel.org
Acked-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The same list item will be used in both cap_delay_list and
cap_unlink_delay_list, so it's buggy to use two different locks
to protect them.
Cc: stable@vger.kernel.org
Fixes: dbc347ef7f0c ("ceph: add ceph_cap_unlink_work to fire check_caps() immediately")
Link: https://lists.ceph.io/hyperkitty/list/ceph-users@ceph.io/thread/AODC76VXRAMXKLFDCTK4TKFDDPWUSCN5
Reported-by: Marc Ruhmann <ruhmann@luis.uni-hannover.de>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Marc Ruhmann <ruhmann@luis.uni-hannover.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
