summaryrefslogtreecommitdiff
path: root/include/dt-bindings/clock
AgeCommit message (Collapse)AuthorFilesLines
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds17-32/+1013
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-01Merge branches 'clk-vc5', 'clk-hsdk', 'clk-mediatek' and 'clk-baikal' into ↵Stephen Boyd2-0/+361
clk-next - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - New clk driver for Baikal-T1 SoCs * clk-vc5: dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 * clk-hsdk: CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first * clk-mediatek: clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC * clk-baikal: clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
2020-06-01Merge branches 'clk-mmp', 'clk-intel', 'clk-ingenic', 'clk-qcom' and ↵Stephen Boyd8-28/+477
'clk-silabs' into clk-next - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for Qualcomm's MSM8939 Generic Clock Controller - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips * clk-mmp: clk: mmp2: Add audio clock controller driver dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding clk: mmp2: Add support for power islands dt-bindings: marvell,mmp2: Add ids for the power domains dt-bindings: clock: Make marvell,mmp2-clock a power controller clk: mmp2: Add the audio clock clk: mmp2: Add the I2S clocks clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init() clk: mmp2: Move thermal register defines up a bit dt-bindings: marvell,mmp2: Add clock id for the Audio clock dt-bindings: marvell,mmp2: Add clock id for the I2S clocks clk: mmp: frac: Allow setting bits other than the numerator/denominator clk: mmp: frac: Do not lose last 4 digits of precision * clk-intel: clk: intel: remove redundant initialization of variable rate64 clk: intel: Add CGU clock driver for a new SoC dt-bindings: clk: intel: Add bindings document & header file for CGU * clk-ingenic: clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused clk: X1000: Add FIXDIV for SSI clock of X1000. dt-bindings: clock: Add and reorder ABI for X1000. clk: Ingenic: Add CGU driver for X1830. dt-bindings: clock: Add X1830 clock bindings. clk: Ingenic: Adjust cgu code to make it compatible with X1830. clk: Ingenic: Remove unnecessary spinlock when reading registers. * clk-qcom: clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src dt-bindings: clock: Add YAML schemas for QCOM A53 PLL clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller clk: qcom: gcc: Add support for Secure control source clock dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID clk: qcom: gcc: Add support for a new frequency for SC7180 clk: qcom: Add DT bindings for MSM8939 GCC clk: qcom: gcc: Add missing UFS clocks for SM8150 clk: qcom: gcc: Add GPU and NPU clocks for SM8150 clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc clk: qcom: gdsc: Handle GDSC regulator supplies clk: qcom: msm8916: Fix the address location of pll->config_reg * clk-silabs: clk: clk-si5341: Add support for the Si5345 series
2020-06-01Merge branches 'clk-unisoc', 'clk-trivial', 'clk-bcm', 'clk-st' and ↵Stephen Boyd1-0/+5
'clk-ast2600' into clk-next * clk-unisoc: clk: sprd: add mipi_csi_xx gate clocks clk: sprd: add dt-bindings include for mipi_csi_xx clocks dt-bindings: clk: sprd: add mipi_csi_xx clocks for SC9863A clk: sprd: check its parent status before reading gate clock clk: sprd: return correct type of value for _sprd_pll_recalc_rate clk: sprd: mark the local clock symbols static * clk-trivial: clk: versatile: remove redundant assignment to pointer clk clk: clk-xgene: Fix a typo in Kconfig clk: Remove unused inline function clk_debug_reparent * clk-bcm: clk: bcm2835: Constify struct debugfs_reg32 clk: bcm2835: Remove casting to bcm2835_clk_register clk: bcm2835: Fix return type of bcm2835_register_gate * clk-st: clk: clk-flexgen: fix clock-critical handling * clk-ast2600: clk: ast2600: Fix AHB clock divider for A1
2020-06-01Merge branches 'clk-tegra', 'clk-imx', 'clk-zynq', 'clk-socfpga', 'clk-at91' ↵Stephen Boyd5-5/+170
and 'clk-ti' into clk-next - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - Support for Intel Agilex clks * clk-tegra: clk: tegra: Add Tegra210 CSI TPG clock gate clk: tegra30: Use custom CCLK implementation clk: tegra20: Use custom CCLK implementation clk: tegra: cclk: Add helpers for handling PLLX rate changes clk: tegra: pll: Add pre/post rate-change hooks clk: tegra: Add custom CCLK implementation clk: tegra: Remove the old emc_mux clock for Tegra210 clk: tegra: Implement Tegra210 EMC clock clk: tegra: Export functions for EMC clock scaling clk: tegra: Add PLLP_UD and PLLMB_UD for Tegra210 clk: tegra: Rename Tegra124 EMC clock source file dt-bindings: clock: tegra: Add clock ID for CSI TPG clock * clk-imx: clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice clk: imx: add imx8m_clk_hw_composite_bus clk: imx: add mux ops for i.MX8M composite clk clk: imx8m: migrate A53 clk root to use composite core clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code clk: imx8mp: Define gates for pll1/2 fixed dividers clk: imx: imx8mp: fix pll mux bit clk: imx8m: drop clk_hw_set_parent for A53 dt-bindings: clocks: imx8mp: Add ids for audiomix clocks clk: imx: Add helpers for passing the device as argument clk: imx: pll14xx: Add the device as argument when registering clk: imx: gate2: Allow single bit gating clock clk: imx: clk-pllv3: Use readl_relaxed_poll_timeout() for PLL lock wait clk: imx: clk-sscg-pll: Remove unnecessary blank lines clk: imx: drop the dependency on ARM64 for i.MX8M clk: imx7ulp: make it easy to change ARM core clk clk: imx: imx6ul: change flexcan clock to support CiA bitrates * clk-zynq: clk: zynqmp: Make zynqmp_clk_get_max_divisor static clk: zynqmp: Update fraction clock check from custom type flags clk: zynqmp: Add support for custom type flags clk: zynqmp: fix memory leak in zynqmp_register_clocks clk: zynqmp: Fix invalid clock name queries clk: zynqmp: Fix divider2 calculation clk: zynqmp: Limit bestdiv with maxdiv * clk-socfpga: clk: socfpga: agilex: add clock driver for the Agilex platform dt-bindings: documentation: add clock bindings information for Agilex clk: socfpga: add const to _ops data structures clk: socfpga: remove clk_ops enable/disable methods clk: socfpga: stratix10: use new parent data scheme * clk-at91: clk: at91: allow setting all PMC clock parents via DT clk: at91: allow setting PCKx parent via DT clk: at91: optimize pmc data allocation clk: at91: pmc: decrement node's refcount clk: at91: pmc: do not continue if compatible not located clk: at91: Add peripheral clock for PTC * clk-ti: clk: ti: dra7: remove two unused symbols clk: ti: dra7xx: fix RNG clock parent clk: ti: dra7xx: mark MCAN clock as DRA76x only clk: ti: dra7xx: fix gpu clkctrl parent clk: ti: omap5: Add proper parent clocks for l4-secure clocks clk: ti: omap4: Add proper parent clocks for l4-secure clocks clk: ti: composite: fix memory leak
2020-06-01Merge branches 'clk-selectable', 'clk-amlogic', 'clk-renesas', 'clk-samsung' ↵Stephen Boyd2-0/+43
and 'clk-allwinner' into clk-next - Allow the COMMON_CLK config to be selectable * clk-selectable: clk: Move HAVE_CLK config out of architecture layer MIPS: Loongson64: Drop asm/clock.h include ARM: mmp: Remove legacy clk code clk: Allow the common clk framework to be selectable mmc: meson-mx-sdio: Depend on OF_ADDRESS and not just OF MIPS: Remove redundant CLKDEV_LOOKUP selects h8300: Remove redundant CLKDEV_LOOKUP selects arm64: tegra: Remove redundant CLKDEV_LOOKUP selects ARM: Remove redundant CLKDEV_LOOKUP selects ARM: Remove redundant COMMON_CLK selects * clk-amlogic: clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers clk: meson: meson8b: Make the CCF use the glitch-free VPU mux clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits clk: meson: meson8b: Fix the polarity of the RESET_N lines clk: meson: meson8b: Fix the first parent of vid_pll_in_sel clk: meson: g12a: Prepare the GPU clock tree to change at runtime clk: meson: gxbb: Prepare the GPU clock tree to change at runtime clk: meson: meson8b: make the hdmi_sys clock tree mutable clk: meson8b: export the HDMI system clock * clk-renesas: dt-bindings: clock: renesas: mstp: Convert to json-schema dt-bindings: clock: renesas: div6: Convert to json-schema clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling clk: renesas: rcar-gen2: Remove superfluous CLK_RENESAS_DIV6 selects clk: renesas: cpg-mssr: Add R8A7742 support dt-bindings: clock: renesas: cpg-mssr: Document r8a7742 binding clk: renesas: Add r8a7742 CPG Core Clock Definitions dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros MAINTAINERS: Add DT Bindings for Renesas Clock Generators clk: renesas: r9a06g032: Fix some typo in comments dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add r8a77961 support * clk-samsung: clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES: Use fallthrough; clk: samsung: Fix CLK_SMMU_FIMCL3 clock name on Exynos542x clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical * clk-allwinner: clk: sunxi: Fix incorrect usage of round_down()
2020-05-30dt-bindings: clk: Add Baikal-T1 CCU Dividers bindingSerge Semin1-0/+32
After being gained by the CCU PLLs the signals must be transformed to be suitable for the clock-consumers. This is done by a set of dividers embedded into the CCU. A first block of dividers is used to create reference clocks for AXI-bus of high-speed peripheral IP-cores of the chip. The second block dividers alter the PLLs output signals to be then consumed by SoC peripheral devices. Both block DT nodes are ordinary clock-providers with standard set of properties supported. But in addition to that each clock provider can be used to reset the corresponding clock domain. This makes the AXI-bus and System Devices CCU DT nodes to be also reset-providers. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200526222056.18072-3-Sergey.Semin@baikalelectronics.ru Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-30dt-bindings: clk: Add Baikal-T1 CCU PLLs bindingSerge Semin1-0/+16
Baikal-T1 Clocks Control Unit is responsible for transformation of a signal coming from an external oscillator into clocks of various frequencies to propagate them then to the corresponding clocks consumers (either individual IP-blocks or clock domains). In order to create a set of high-frequency clocks the external signal is firstly handled by the embedded into CCU PLLs. So the corresponding dts-node is just a normal clock-provider node with standard set of properties. Note as being part of the Baikal-T1 System Controller its DT node is supposed to be a child the system controller node. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200526222056.18072-2-Sergey.Semin@baikalelectronics.ru Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-29clk: mediatek: add mt6765 clock IDsMars Cheng1-0/+313
Add MT6765 clock dt-bindings, include topckgen, apmixedsys, infracfg, mcucfg and subsystem clocks. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Owen Chen <owen.chen@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1582278742-1626-5-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-29clk: qcom: Add missing msm8998 ufs_unipro_core_clk_srcJeffrey Hugo1-0/+1
ufs_unipro_core_clk_src is required to allow UFS to clock scale for power savings. Fixes: b5f5f525c547 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20200528142205.44003-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-29dt-bindings: clock: Add and reorder ABI for X1000.周琰杰 (Zhou Yanjie)1-28/+36
1.The SSI clock of X1000 not like JZ4770 and JZ4780, they are not directly derived from the output of SSIPLL, but from the clock obtained by dividing the frequency by 2. "X1000_CLK_SSIPLL_DIV2" is added for this purpose, it must between "X1000_CLK_SSIPLL" and "X1000_CLK_SSIMUX", otherwise an error will occurs when initializing the clock. These ABIs are only used for X1000, and I'm sure that no other devicetree out there is using these ABIs, so we should be able to reorder them. 2.Clocks of LCD, OTG, EMC, EFUSE, OST, TCU are also added. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200528031549.13846-7-zhouyanjie@wanyeetech.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-29dt-bindings: clock: Add X1830 clock bindings.周琰杰 (Zhou Yanjie)1-0/+55
Add the clock bindings for the X1830 Soc from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200528031549.13846-5-zhouyanjie@wanyeetech.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28dt-bindings: clock: Add Marvell MMP Audio Clock Controller bindingLubomir Rintel1-0/+10
This describes the bindings for a controller that generates master and bit clocks for the I2S interface. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-13-lkundrak@v3.sk Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28dt-bindings: marvell,mmp2: Add clock id for the Audio clockLubomir Rintel1-0/+1
This clocks the Audio block. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200519224151.2074597-5-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28dt-bindings: marvell,mmp2: Add clock id for the I2S clocksLubomir Rintel1-0/+2
There are two of these on a MMP2. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200519224151.2074597-4-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27clk: sprd: add dt-bindings include for mipi_csi_xx clocksChunyan Zhang1-0/+5
mipi_csi_xx clocks are used by camera sensors. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200527053638.31439-4-zhang.lyra@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27clk: at91: allow setting all PMC clock parents via DTMichał Mirosław1-0/+3
We need to have clocks accessible via phandle to select them as peripheral clock parent using assigned-clock-parents in DT. Add support for PLLACK/PLLBCK/AUDIOPLLCK clocks where available. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/fa39cc10dab8341ea4bc2b7152be9217b2cd34a5.1588630999.git.mirq-linux@rere.qmqm.pl Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27clk: at91: allow setting PCKx parent via DTMichał Mirosław1-0/+1
This exposes PROGx clocks for use in assigned-clocks DeviceTree property for selecting PCKx parent clock. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lkml.kernel.org/r/0054532c00163ddf405dad658b32f0d7d97fcc8e.1588630999.git.mirq-linux@rere.qmqm.pl Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock IDTaniya Das1-0/+1
The gcc_sec_ctrl_clk_src clock is required to be controlled by the secure controller driver. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1589709861-27580-3-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27dt-bindings: documentation: add clock bindings information for AgilexDinh Nguyen1-0/+70
Document the Agilex clock bindings, and add the clock header file. The clock header is an enumeration of all the different clocks on the Agilex platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200512181647.5071-4-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27dt-bindings: clk: intel: Add bindings document & header file for CGURahul Tanwar1-0/+165
Clock generation unit(CGU) is a clock controller IP of Intel's Lightning Mountain(LGM) SoC. Add DT bindings include file and document for CGU clock controller driver of LGM. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lkml.kernel.org/r/8dce2be13195aab20c6b11fca6af0fffe22d5241.1587102634.git.rahul.tanwar@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26Merge tag 'tegra-for-5.8-media' of ↵Arnd Bergmann5-30/+30
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers media: tegra: Changes for v5.8-rc1 This contains a V4L2 video capture driver for Tegra210. * tag 'tegra-for-5.8-media' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: media: tegra-video: Do not enable COMPILE_TEST MAINTAINERS: correct path in TEGRA VIDEO DRIVER media: tegra-video: Make tegra210_video_formats static MAINTAINERS: Add Tegra Video driver section media: tegra-video: Add Tegra210 Video input driver dt-bindings: i2c: tegra: Document Tegra210 VI I2C dt-bindings: tegra: Add VI and CSI bindings dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30 dt-bindings: memory: tegra: Add external memory controller binding for Tegra210 dt-bindings: clock: tegra: Remove PMC clock IDs dt-bindings: clock: tegra: Add clock ID for CSI TPG clock Link: https://lore.kernel.org/r/20200515145311.1580134-7-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-20clk: imx8mp: use imx8m_clk_hw_composite_core to simplify codePeng Fan1-1/+10
Use imx8m_clk_hw_composite_core to simpliy clks that belong to core clk slice. Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20clk: imx8mp: Define gates for pll1/2 fixed dividersPeng Fan1-1/+18
Inspried from commit e8688fe8df7d ("clk: imx8mn: Define gates for pll1/2 fixed dividers") On imx8mp there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate. Only one of these gates (the one "dividing" by one) is currently defined and it's incorrectly set as the parent of all the fixed-factor dividers. Add the other 8 gates to the clock tree between sys_pll1/2_bypass and the fixed dividers. Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-15clk: qcom: Add DT bindings for MSM8939 GCCBryan O'Donoghue1-0/+206
Add compatible strings and the include files for the MSM8939 GCC. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lkml.kernel.org/r/20200512115023.2856617-2-bryan.odonoghue@linaro.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-12clk: tegra: Add PLLP_UD and PLLMB_UD for Tegra210Joseph Lo1-2/+2
Introduce the low jitter path of PLLP and PLLMB which can be used as EMC clock source. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12dt-bindings: clock: tegra: Add clock ID for CSI TPG clockSowjanya Komatineni1-1/+1
Tegra210 uses PLLD out internally for CSI TPG. This patch adds a clock ID for this CSI TPG clock from PLLD. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12dt-bindings: clock: tegra: Remove PMC clock IDsSowjanya Komatineni5-29/+29
clk_out_1, clk_out_2, clk_out_3, blink are part of Tegra PMC block so these clocks should be provided by the Tegra PMC. IDs for these clocks have been defined in dt-bindings/soc/tegra-pmc.h. This patch removes the IDs for these clocks from the Tegra clock device tree bindings. Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-04-29dt-bindings: clocks: imx8mp: Add ids for audiomix clocksAbel Vesa1-0/+62
Add all the clock ids for the audiomix clocks. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-04-28clk: renesas: Add r8a7742 CPG Core Clock DefinitionsLad Prabhakar1-0/+42
Add all RZ/G1H Clock Pulse Generator Core Clock Outputs, as listed in Table 7.2a ("List of Clocks [RZ/G1H]") of the RZ/G1 Hardware User's Manual. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1587678050-23468-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-14clk: imx7ulp: make it easy to change ARM core clkPeng Fan1-1/+4
ARM clk could only source from divcore or hsrun_divcore. Follow what we already used on i.MX7D and i.MX8M SoCs, use imx_clk_hw_cpu API. When ARM core is running normaly, whether divcore or hwrun_divcore will finally source from SPLL_PFD0. However SPLL_PFD0 is marked with CLK_SET_GATE, so we need to disable SPLL_PFD0, when configure the rate. So add CORE and HSRUN_CORE virtual clk to make it easy to configure the clk using imx_clk_hw_cpu API. Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk, prograting it the parent with CLK_SET_RATE_PARENT will finally set the SPLL_PFD0 clk. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-04-14clk: meson8b: export the HDMI system clockMartin Blumenstingl1-0/+1
Export the HDMI system clock (used by the HDMI transmitter) so it can be used in the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200330234535.3327513-2-martin.blumenstingl@googlemail.com
2020-04-09Merge tag 'riscv-for-linus-5.7' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of new features: - Partial support for the Kendryte K210. There are still a few outstanding issues that I have patches for, but I don't actually have a board to test them so they're not included yet. - SBI v0.2 support. - Fixes to support for building with LLVM-based toolchains. The resulting images are known not to boot yet. I don't anticipate a part two, but I'll probably have something early in the RCs to finish up the K210 support" * tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits) riscv: create a loader.bin boot image for Kendryte SoC riscv: Kendryte K210 default config riscv: Add Kendryte K210 device tree riscv: Select required drivers for Kendryte SOC riscv: Add Kendryte K210 SoC support riscv: Add SOC early init support riscv: Unaligned load/store handling for M_MODE RISC-V: Support cpu hotplug RISC-V: Add supported for ordered booting method using HSM RISC-V: Add SBI HSM extension definitions RISC-V: Export SBI error to linux error mapping function RISC-V: Add cpu_ops and modify default booting method RISC-V: Move relocate and few other functions out of __init RISC-V: Implement new SBI v0.2 extensions RISC-V: Introduce a new config for SBI v0.1 RISC-V: Add SBI v0.2 extension definitions RISC-V: Add basic support for SBI v0.2 RISC-V: Mark existing SBI as 0.1 SBI. riscv: Use macro definition instead of magic number riscv: Add support to dump the kernel page tables ...
2020-04-05Merge tag 'clk-for-linus' of ↵Linus Torvalds15-10/+678
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's not much to see in the core framework this time around. Instead the majority of the diff is the normal collection of driver additions for new SoCs and non-critical clk data fixes and updates. The framework must be middle aged. The two biggest directories in the diffstat show that the Qualcomm and Unisoc support added a handful of big drivers for new SoCs but that's not really the whole story because those new drivers tend to add large numbers of lines of clk data. There's a handful of AT91 clk drivers added this time around too and a bunch of improvements to drivers like the i.MX driver. All around lots of updates and fixes in various clk drivers which is good to see. The core framework has only one real major change which has been baking in next for the past couple months. It fixes the framework so that it stops caching a clk's phase when the phase clk_op returns an error. Before this change we would consider some negative errno as a phase and that just doesn't make sense. Core: - Don't show clk phase when it is invalid New Drivers: - Add support for Unisoc SC9863A clks - Qualcomm SM8250 RPMh and MSM8976 RPM clks - Qualcomm SM8250 Global Clock Controller (GCC) support - Qualcomm SC7180 Modem Clock Controller (MSS CC) support - EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs - Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and at91sam9g45 SoCs Updates: - GPU GX GDSC support on Qualcomm sc7180 - Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers - A series from Anson to convert i.MX8 clock bindings to json-schema - Update i.MX pll14xx driver to include new frequency entries for pll1443x table, and return error for invalid PLL type - Add missing of_node_put() call for a number of i.MX clock drivers - Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already have the flag on its child cpu clock - Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL via CORE_SEL slice, and source from A53 CCM clk root when we need to change ARM PLL frequency. Thus, we can support core running above 1GHz safely - Update i.MX pfdv2 driver to check zero rate and use determine_rate for getting the best rate - Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for imx7d - Remove PMC clks from Tegra clk driver - Improved clock/reset handling for the Renesas R-Car USB2 Clock Selector - Conversion to json-schema of the Renesas CPG/MSSR DT bindings - Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3 - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and M3-N - Update Amlogic audio clock gate hierarchy for meson8 and gxbb - Update Amlogic g12a spicc clock sources - Support for Ingenic X1000 TCU clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (146 commits) clk: sprd: fix to get a correct ibias of pll dt-bindings: imx8mm-clock: Fix the file path dt-bindings: imx8mq-clock: Fix the file path clk: qcom: rpmh: Drop unnecessary semicolons clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd() clk: tegra: Use NULL for pointer initialization clk: sprd: add clocks support for SC9863A clk: sprd: support to get regmap from parent node clk: sprd: Add macros for referencing parents without strings clk: sprd: Add dt-bindings include file for SC9863A dt-bindings: clk: sprd: add bindings for sc9863a clock controller dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific clk: sprd: add gate for pll clocks MAINTAINERS: dt: update reference for arm-integrator.txt clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks clk: mmp2: Add clock for fifth SD HCI on MMP3 dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3 clk: mmp2: Add clocks for the thermal sensors dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors clk: mmp2: add the GPU clocks ...
2020-04-04Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds4-1/+11
Pull ARM devicetree updates from Arnd Bergmann: "Most of the commits are for additional hardware support and minor fixes for existing machines for all the usual platforms: qcom, amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap, and versatile. The conversion of binding files to machine-readable yaml format continues, along with fixes found during the validation. Andre Przywara takes over maintainership for the old Calxeda Highbank platform and provides a number of updates. The OMAP2+ platforms see a continued move from platform data into dts files, for many devices that relied on a mix of auxiliary data in addition to the DT description A moderate number of new SoCs and machines are added, here is a full list: - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865 (SM8250) is the current high-end phone chip, and IPQ6018 is a new WiFi-6 router chip. - Mediatek MT8516 application processor SoC for voice assistants, along with the "pumpkin" development board - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an evaluation board. - Kontron "sl28" board family based on NXP LS1028A - Eleven variations of the new i.MX6 TechNexion Pico board, combining the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7 SoM carriers - Three additional variants of the Toradex Colibri board family, all based on versions of the NXP i.MX7. - The Pinebook Pro laptop based on Rockchip RK3399 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on the ST-Ericsson u8500 platform - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on STMicroelectronics stm32mp157 - Renesas M3ULCB starter kit for R-Car M3-W+ - Hoperun HiHope development board with Renesas RZ/G2M - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13" * tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits) ARM: dts: ux500: Fix missing node renames arm64: dts: Revert "specify console via command line" MAINTAINERS: Update Calxeda Highbank maintainership arm: dts: calxeda: Group port-phys and sgpio-gpio items arm: dts: calxeda: Fix interrupt grouping arm: dts: calxeda: Provide UART clock arm: dts: calxeda: Basic DT file fixes arm64: dts: specify console via command line ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node ...
2020-04-04Merge branches 'clk-unisoc', 'clk-tegra', 'clk-qcom' and 'clk-imx' into clk-nextStephen Boyd17-13/+678
- Add support for Unisoc SC9863A clks - GPU GX GDSC support on Qualcomm sc7180 - Qualcomm SM8250 RPMh and MSM8976 RPM clks - Qualcomm SM8250 Global Clock Controller (GCC) support - Qualcomm SC7180 Modem Clock Controller (MSS CC) support * clk-unisoc: clk: sprd: fix to get a correct ibias of pll clk: sprd: add clocks support for SC9863A clk: sprd: support to get regmap from parent node clk: sprd: Add macros for referencing parents without strings clk: sprd: Add dt-bindings include file for SC9863A dt-bindings: clk: sprd: add bindings for sc9863a clock controller dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific clk: sprd: add gate for pll clocks * clk-tegra: clk: tegra: Use NULL for pointer initialization clk: tegra: Remove audio clocks configuration from clock driver clk: tegra: Remove tegra_pmc_clk_init along with clk ids clk: tegra: Remove CLK_M_DIV fixed clocks clk: tegra: Fix Tegra PMC clock out parents clk: tegra: Add Tegra OSC to clock lookup clk: tegra: Add support for OSC_DIV fixed clocks dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings dt-bindings: tegra: Convert Tegra PMC bindings to YAML dt-bindings: clock: tegra: Add IDs for OSC clocks * clk-qcom: (21 commits) clk: qcom: rpmh: Drop unnecessary semicolons clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd() clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150 ipq806x: gcc: Added the enable regs and mask for PRNG clk: qcom: Add modem clock controller driver for SC7180 clk: qcom: gcc: Add support for modem clocks in GCC dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings clk: qcom: clk-rpm: add missing rpm clk for ipq806x clk: qcom: gcc: Add global clock controller driver for SM8250 dt-bindings: clock: Add SM8250 GCC clock bindings clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs clk: qcom: clk-alpha-pll: Refactor trion PLL clk: qcom: clk-alpha-pll: Use common names for defines dt-bindings: clock: rpmcc: Document msm8976 compatible clk: qcom: smd: Add support for MSM8976 rpm clocks clk: qcom: clk-rpmh: Wait for completion when enabling clocks clk: qcom: rpmh: Add support for RPMH clocks on SM8250 dt-bindings: clock: Add RPMHCC bindings for SM8250 clk: qcom: alpha-pll: Make error prints more informative clk: qcom: gpucc: Add support for GX GDSC for SC7180 ... * clk-imx: (43 commits) dt-bindings: imx8mm-clock: Fix the file path dt-bindings: imx8mq-clock: Fix the file path clk: imx: clk-gate2: Pass the device to the register function clk: imx7d: Add PXP clock clk: imx8mq: A53 core clock no need to be critical clk: imx8mp: A53 core clock no need to be critical clk: imx8mm: A53 core clock no need to be critical clk: imx8mn: A53 core clock no need to be critical clk: imx: pllv4: use prepare/unprepare clk: imx: pfdv2: determine best parent rate clk: imx: pfdv2: switch to use determine_rate clk: imx: Fix division by zero warning on pfdv2 clk: imx: clk-sscg-pll: Drop unnecessary initialization clk: imx: pll14xx: Return error if pll type is invalid clk: imx: imx8mp: fix a53 cpu clock clk: imx: imx8mn: fix a53 cpu clock clk: imx: imx8mm: fix a53 cpu clock clk: imx: imx8mq: fix a53 cpu clock clk: imx8mp: Rename the IMX8MP_CLK_HDMI_27M clock clk: imx8mn: Remove unused includes ...
2020-04-04Merge branches 'clk-ti', 'clk-ingenic', 'clk-typo', 'clk-at91', 'clk-mmp2' ↵Stephen Boyd1-0/+13
and 'clk-arm-icst' into clk-next - EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs - Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and at91sam9g45 SoCs - Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers * clk-ti: clk: keystone: Add new driver to handle syscon based clocks dt-bindings: clock: Add binding documentation for TI EHRPWM TBCLK * clk-ingenic: clk: ingenic/TCU: Fix round_rate returning error clk: ingenic/jz4770: Exit with error if CGU init failed clk: JZ4780: Add function for enable the second core. clk: Ingenic: Add support for TCU of X1000. * clk-typo: clk: Fix trivia typo in comment exlusive => exclusive * clk-at91: clk: at91: add at91rm9200 pmc driver clk: at91: add at91sam9n12 pmc driver clk: at91: add sama5d3 pmc driver clk: at91: add at91sam9g45 pmc driver clk: at91: usb: introduce num_parents in driver's structure clk: at91: usb: use proper usbs_mask clk: at91: sam9x60: fix usb clock parents clk: at91: usb: continue if clk_hw_round_rate() return zero clk: at91: sam9x60: Don't use audio PLL * clk-mmp2: clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks clk: mmp2: Add clock for fifth SD HCI on MMP3 dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3 clk: mmp2: Add clocks for the thermal sensors dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors clk: mmp2: add the GPU clocks dt-bindings: marvell,mmp2: Add clock ids for the GPU clocks clk: mmp2: Add PLLs that are available on MMP3 dt-bindings: marvell,mmp2: Add clock ids for MMP3 PLLs clk: mmp2: Check for MMP3 dt-bindings: clock: Add MMP3 compatible string clk: mmp2: Stop pretending PLL outputs are constant clk: mmp2: Add support for PLL clock sources dt-bindings: clock: Convert marvell,mmp2-clock to json-schema clk: mmp2: Constify some strings clk: mmp2: Remove a unused prototype * clk-arm-icst: MAINTAINERS: dt: update reference for arm-integrator.txt clk: versatile: Add device tree probing for IM-PD1 clocks clk: versatile: Export icst_clk_setup() dt-bindings: clock: Create YAML schema for ICST clocks
2020-04-04Merge branches 'clk-phase-errors', 'clk-amlogic', 'clk-renesas' and ↵Stephen Boyd3-1/+4
'clk-allwinner' into clk-next - Don't show clk phase when it is invalid * clk-phase-errors: clk: rockchip: fix mmc get phase clk: Fix phase init check clk: Bail out when calculating phase fails during clk registration clk: Move rate and accuracy recalc to mostly consumer APIs clk: Use 'parent' to shorten lines in __clk_core_init() clk: Don't cache errors from clk_ops::get_phase() * clk-amlogic: clk: meson: meson8b: set audio output clock hierarchy clk: meson: g12a: add support for the SPICC SCLK Source clocks dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs clk: meson: gxbb: set audio output clock hierarchy clk: meson: gxbb: add the gxl internal dac gate dt-bindings: clk: meson: add the gxl internal dac gate * clk-renesas: dt-bindings: clock: renesas: cpg-mssr: Convert to json-schema clk: renesas: rcar-usb2-clock-sel: Add reset_control clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add power-domains and resets properties dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties clk: renesas: Remove use of ARCH_R8A7795 clk: renesas: r8a77965: Add RPC clocks clk: renesas: r8a7796: Add RPC clocks clk: renesas: r8a7795: Add RPC clocks clk: renesas: rcar-gen3: Add CCREE clocks * clk-allwinner: clk: sunxi-ng: sun8i-de2: Sort structures clk: sunxi-ng: sun8i-de2: Add R40 specific quirks clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A83T clk: sunxi-ng: sun8i-de2: Don't reuse A83T resets clk: sunxi-ng: sun8i-de2: H6 doesn't have rotate core clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A64 clk: sunxi-ng: sun8i-de2: Split out H5 definitions clk: sunxi-ng: a64: Export MBUS clock
2020-04-04Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds4-4/+12
Pull ARM SoC updates from Arnd Bergmann: "The code changes are mostly for 32-bit platforms and include: - Lots of updates for the Nvidia Tegra platform, including cpuidle, pmc, and dt-binding changes - Microchip at91 power management updates for the recently added sam9x60 SoC - Treewide setup_irq deprecation by afzal mohammed - STMicroelectronics stm32 gains earlycon support - Renesas platforms with Cortex-A9 can now use the global timer - Some TI OMAP2+ platforms gain cpuidle support - Various cleanups for the i.MX6 and Orion platforms, as well as Kconfig files across all platforms" * tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits) ARM: qcom: Add support for IPQ40xx ARM: mmp: replace setup_irq() by request_irq() ARM: cns3xxx: replace setup_irq() by request_irq() ARM: spear: replace setup_irq() by request_irq() ARM: ep93xx: Replace setup_irq() by request_irq() ARM: iop32x: replace setup_irq() by request_irq() arm: mach-dove: Mark dove_io_desc as __maybe_unused ARM: orion: replace setup_irq() by request_irq() ARM: debug: stm32: add UART early console support for STM32MP1 ARM: debug: stm32: add UART early console support for STM32H7 ARM: debug: stm32: add UART early console configuration for STM32F7 ARM: debug: stm32: add UART early console configuration for STM32F4 cpuidle: tegra: Disable CC6 state if LP2 unavailable cpuidle: tegra: Squash Tegra114 driver into the common driver cpuidle: tegra: Squash Tegra30 driver into the common driver cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle ARM: tegra: cpuidle: Remove unnecessary memory barrier ARM: tegra: cpuidle: Make abort_flag atomic ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2 ARM: tegra: Make outer_disable() open-coded ...
2020-04-03Merge branch 'arm/late' into arm/dtArnd Bergmann1-0/+5
Include originally "late" updates for OMAP and Qualcomm, now that it's not late any more. * arm/late: (122 commits) ARM: OMAP2+: Drop legacy platform data for ti81xx edma ARM: dts: Configure interconnect target module for ti816x edma ARM: dts: Configure interconnect target module for dm814x tptc3 ARM: dts: Configure interconnect target module for dm814x tptc2 ARM: dts: Configure interconnect target module for dm814x tptc1 ARM: dts: Configure interconnect target module for dm814x tptc0 ARM: dts: Configure interconnect target module for dm814x tpcc ARM: OMAP2+: Drop legacy platform data for dm814x cpsw ARM: dts: Configure interconnect target module for dm814x cpsw clk: ti: Fix dm814x clkctrl for ethernet arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware arm64: dts: sdm845: add IPA information arm64: dts: qcom: db845c: add analog audio support arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s arm64: dts: qcom: c630: Enable audio support arm64: dts: qcom: sdm845: add apr nodes arm64: dts: qcom: sdm845: add slimbus nodes arm64: dts: qcom: sc7180: Update reg names for SDHC arm64: dts: qcom: qcs404: Enable CQE support for eMMC arm64: dts: msm8916: Add fastrpc node ...
2020-04-03riscv: Add Kendryte K210 device treeDamien Le Moal1-0/+20
Add a generic device tree for Kendryte K210 SoC based boards. This is for now a very simple device tree describing the core elements of the SoC. This is suitable (and tested) for the Kendryte KD233 development board, the Sipeed MAIX M1 Dan Dock board and the Sipeed MAIXDUINO board. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26Merge tag 'amlogic-dt64-2' of ↵Arnd Bergmann2-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.7 (round 2) - G12[ab]: add SPI support, enable on odroid-n2 * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node arm64: dts: meson-g12: add the SPIFC nodes arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width arm64: dts: meson-g12-common: add spicc controller nodes dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs dt-bindings: clk: meson: add the gxl internal dac gate Link: https://lore.kernel.org/r/7hftdyhfq4.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-26Merge tag 'imx-dt64-5.7' of ↵Arnd Bergmann1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 DTS update for 5.7: - New support for Kontron LS1028A based boards and NXP i.MX8MP EVK. - Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board. - Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board. - Add SNVS clock description to pwrkey device for i.MX8 SoCs. - A number of updates on librem5-devkit board to add audio, proximity sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD devices as well. - A series of patches from Anson Huang to update i.MX8 EVK boards for support of I2C PCA6416, thermal, GPIO LED, OPP table etc. - Add PCIe device nodes for LX2160A and LS1028A SoC. - Add FSPI deivce support for LX2160A evaluation boards. - Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board. - Other small and random updates on LS1028A and i.MX8 support. * tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits) arm64: dts: ls1028a: disable the felix switch by default arm64: dts: imx8mp: Add snvs clock to powerkey arm64: dts: imx8mn: Add snvs clock to powerkey arm64: dts: ls1028a: Add PCIe controller DT nodes arm64: dts: ls1028a: sl28: add support for variant 2 arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS arm64: dts: ls1028a: sl28: fix on-board EEPROMS arm64: dts: freescale: sl28: add SPI flash arm64: dts: imx8m: fix aips dts node arm64: dts: imx8mn: Add CPU thermal zone support arm64: dts: imx8mm: Add thermal zone support arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration arm64: dts: enable fspi in imx8mm dts arm64: dts: imx8mn: align name for crypto child nodes arm64: dts: lx2160aqds: Add FSPI node properties arm64: dts: lx2160ardb: Update FSPI node properties arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support arm64: dts: layerscape: add iommu-map property to pci nodes arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus arm64: dts: imx8mp-evk: Add i2c3 support ... Link: https://lore.kernel.org/r/20200318051918.32579-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25clk: sprd: Add dt-bindings include file for SC9863AChunyan Zhang1-0/+334
This file defines all SC9863A clock indexes, it should be included in the device tree in which there's device using the clocks. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200304072730.9193-5-zhang.lyra@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3Lubomir Rintel1-0/+1
There's one extra SDHCI on MMP3, used by the internal SD card on OLPC XO-4. Add a clock for it. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-16-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21dt-bindings: marvell,mmp2: Add clock ids for the thermal sensorsLubomir Rintel1-0/+4
There seems to be a single thermal sensor block on MMP2 and a couple more on MMP3. Add definitions for their respective clocks. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-14-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21dt-bindings: marvell,mmp2: Add clock ids for the GPU clocksLubomir Rintel1-0/+5
MMP2 has a single GC860 core while MMP3 has a GC2000 and a GC300. On both platforms there's an AXI bus interface clock that's common for all GPUs and each GPU core has a separate clock. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-12-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21dt-bindings: marvell,mmp2: Add clock ids for MMP3 PLLsLubomir Rintel1-0/+3
MMP3 variant provides some more clocks. Add respective IDs. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200309194254.29009-9-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150Wesley Cheng1-0/+4
This adds the USB3 PIPE clock and GDSC structures, so that the USB driver can vote for these resources to be enabled/disabled when required. Both are needed for SS and HS USB paths to operate properly. The GDSC will allow the USB system to be brought out of reset, while the PIPE clock is needed for data transactions between the PHY and controller. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lkml.kernel.org/r/1584478412-7798-2-git-send-email-wcheng@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindingsTaniya Das2-1/+18
The Modem Subsystem clock provider have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those. Add clock ids for GCC MSS and MSS clocks which are required to bring the modem out of reset. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1584596131-22741-2-git-send-email-tdas@codeaurora.org Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-16 12:32:10 +0300