summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)AuthorFilesLines
2018-08-16Merge tag 'clk-for-linus' of ↵Linus Torvalds14-4/+841
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The new and exciting feature this time around is in the clk core. We've added duty cycle support to the clk API so that clk signal duty cycle ratios can be adjusted while taking into account things like clk dividers and clk tree hierarchy. So far only one SoC has implemented support for this, but I expect there will be more to come in the future. Outside of the core, we have the usual pile of clk driver updates and additions. The Amlogic meson driver got the most lines in the diffstat this time around because it added support for a whole bunch of hardware and duty cycle configuration. After that the Rockchip PX30, Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the diff. We're left with the collection of non-critical fixes after that. Overall it looks pretty quiet this time. Core: - Clk duty cycle support - Proper CLK_SET_RATE_GATE support throughout the tree New Drivers: - Actions Semi Owl series S700 SoC clk driver - Qualcomm SDM845 display clock controller - i.MX6SX ocram_s clk support - Uniphier NAND, USB3 PHY, and SPI clk support - Qualcomm RPMh clk driver - i.MX7D mailbox clk support - Maxim 9485 Programmable Clock Generator - expose 32 kHz PLL on PXA SoCs - imx6sll GPIO clk gate support - Atmel at91 I2S audio clk support - SI544/SI514 clk on/off support - i.MX6UL GPIO clock gates in CCM CCGR - Renesas Crypto Engine clocks on R-Car H3 - Renesas clk support for the new RZ/N1D SoC - Allwinner A64 display engine clock support - support for Rockchip's PX30 SoC - Amlogic Meson axg PCIe and audio clocks - Amlogic Meson GEN CLK on gxbb, gxl and axg Updates: - remove an unused variable from Exynos4412 ISP driver - fix a thinko bug in SCMI clk division logic - add missing of_node_put()s in some i.MX clk drivers - Tegra SDMMC clk jitter improvements with high speed signaling modes - SPDX tagging for qcom and cs2000-cp drivers - stop leaking con ids in __clk_put() - fix a corner case in fixed factor clk probing where node is in DT but parent clk is registered much later - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value - i.MX clk init arrays removed in place of CLK_IS_CRITICAL - convert to CLK_IS_CRITICAL for i.MX51/53 driver - fix Tegra BPMP driver oops when xlating a NULL clk - proper default configuration for vic03 and vde clks on Tegra124 - mark Tegra memory controller clks as critical - fix array bounds clamp in Tegra's emc determine_rate() op - Ingenic i2s bit update and allow UDC clk to gate - fix name of aspeed SDC clk define to have only one 'CLK' - fix i.MX6QDL video clk parent - critical clk markings for qcom SDM845 - fix Stratix10 mpu_free_clk and sdmmc_free_clk parents - mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it supplying the pwm used to drive the logic supply of the rk3399 core" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (85 commits) clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: cs2000-cp: convert to SPDX identifiers clk: scmi: Fix the rounding of clock rate clk: qcom: Add display clock controller driver for SDM845 clk: mvebu: armada-37xx-periph: Remove unused var num_parents clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable clk: actions: Add S700 SoC clock support dt-bindings: clock: Add S700 support for Actions Semi Soc's clk: actions: Add missing REGMAP_MMIO dependency clk: uniphier: add clock frequency support for SPI clk: uniphier: add more USB3 PHY clocks clk: uniphier: add NAND 200MHz clock clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks clk: tegra: Add sdmmc mux divider clock clk: tegra: Refactor fractional divider calculation clk: tegra: Fix includes required by fence_udelay() clk: imx6sll: fix missing of_node_put() clk: imx6ul: fix missing of_node_put() clk: imx: add ocram_s clock for i.mx6sx clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent ...
2018-08-16Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+11
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...
2018-08-15Merge branches 'clk-actions-s700', 'clk-exynos-unused', ↵Stephen Boyd2-0/+163
'clk-qcom-dispcc-845', 'clk-scmi-round' and 'clk-cs2000-spdx' into clk-next * clk-actions-s700: : - Actions Semi Owl series S700 SoC clk driver clk: actions: Add S700 SoC clock support dt-bindings: clock: Add S700 support for Actions Semi Soc's clk: actions: Add missing REGMAP_MMIO dependency * clk-exynos-unused: : - Remove an unused variable from Exynos4412 ISP driver clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable * clk-qcom-dispcc-845: : - Qualcomm SDM845 display clock controller clk: qcom: Add display clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Display clock bindings clk: qcom: Move frequency table macro to common file * clk-scmi-round: : - Fix a thinko bug in SCMI clk division logic clk: scmi: Fix the rounding of clock rate * clk-cs2000-spdx: clk: cs2000-cp: convert to SPDX identifiers
2018-08-15Merge branches 'clk-imx6-ocram', 'clk-missing-put', ↵Stephen Boyd1-0/+4
'clk-tegra-sdmmc-jitter', 'clk-allwinner' and 'clk-uniphier' into clk-next * clk-imx6-ocram: : - i.MX6SX ocram_s clk support clk: imx: add ocram_s clock for i.mx6sx * clk-missing-put: : - Add missing of_node_put()s in some i.MX clk drivers clk: imx6sll: fix missing of_node_put() clk: imx6ul: fix missing of_node_put() * clk-tegra-sdmmc-jitter: : - Tegra SDMMC clk jitter improvements with high speed signaling modes clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks clk: tegra: Add sdmmc mux divider clock clk: tegra: Refactor fractional divider calculation clk: tegra: Fix includes required by fence_udelay() * clk-allwinner: clk: sunxi-ng: add A64 compatible string dt-bindings: add compatible string for the A64 DE2 CCU clk: sunxi-ng: r40: Export video PLLs clk: sunxi-ng: r40: Allow setting parent rate to display related clocks clk: sunxi-ng: r40: Add minimal rate for video PLLs * clk-uniphier: : - Uniphier NAND, USB3 PHY, and SPI clk support clk: uniphier: add clock frequency support for SPI clk: uniphier: add more USB3 PHY clocks clk: uniphier: add NAND 200MHz clock
2018-08-15Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu', ↵Stephen Boyd4-0/+488
'clk-imx-init-array-cleanup' and 'clk-rockchip' into clk-next * clk-mvebu-spdx: clk: mvebu: armada-37xx-periph: switch to SPDX license identifier * clk-meson: clk: meson: add gen_clk clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition clk: meson-axg: add clocks required by pcie driver clk: meson: remove unused clk-audio-divider driver clk: meson: stop rate propagation for audio clocks clk: meson: axg: add the audio clock controller driver clk: meson: add axg audio sclk divider driver clk: meson: add triple phase clock driver clk: meson: add clk-phase clock driver clk: meson: clean-up meson clock configuration clk: meson: remove obsolete register access clk: meson: expose GEN_CLK clkid clk: meson-axg: add pcie and mipi clock bindings dt-bindings: clock: add meson axg audio clock controller bindings clk: meson: audio-divider is one based clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL * clk-imx7d-mu: : - i.MX7D mailbox clk support clk: imx7d: add IMX7D_MU_ROOT_CLK * clk-imx-init-array-cleanup: : - i.MX clk init arrays removed in place of CLK_IS_CRITICAL clk: imx6sx: remove clks_init_on array clk: imx6sl: remove clks_init_on array clk: imx6q: remove clks_init_on array * clk-rockchip: clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: rockchip: fix clk_i2sout parent selection bits on rk3399 clk: rockchip: add clock controller for px30 clk: rockchip: add support for half divider dt-bindings: add bindings for px30 clock controller clk: rockchip: add dt-binding header for px30
2018-08-15Merge branches 'clk-ingenic-fixes', 'clk-max9485', 'clk-pxa-32k-pll', ↵Stephen Boyd4-3/+29
'clk-aspeed' and 'clk-imx6sll-gpio' into clk-next * clk-ingenic-fixes: : - Ingenic i2s bit update and allow UDC clk to gate clk: ingenic: Add missing flag for UDC clock clk: ingenic: Fix incorrect data for the i2s clock * clk-max9485: : - Maxim 9485 Programmable Clock Generator clk: Add driver for MAX9485 dts: clk: add devicetree bindings for MAX9485 * clk-pxa-32k-pll: : - Expose 32 kHz PLL on PXA SoCs clk: pxa: export 32kHz PLL * clk-aspeed: : - Fix name of aspeed SDC clk define to have only one 'CLK' clk: aspeed: Fix SDCLK name * clk-imx6sll-gpio: : - imx6sll GPIO clk gate support clk: imx6sll: add GPIO LPCGs
2018-08-15Merge branches 'clk-imx6-video-parent', 'clk-qcom-sdm845-criticals', ↵Stephen Boyd2-0/+150
'clk-renesas', 'clk-stratix10-fixes' and 'clk-atmel-i2s' into clk-next * clk-imx6-video-parent: : - Fix i.MX6QDL video clk parent clk: imx6: fix video_27m parent for IMX6QDL_CLK_CKO1_SEL * clk-qcom-sdm845-criticals: : - critical clk markings for qcom SDM845 clk: qcom: Enable clocks which needs to be always on for SDM845 * clk-renesas: clk: renesas: Renesas R9A06G032 clock driver dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation dt-bindings: clock: Add the r9a06g032-sysctrl.h file clk: renesas: r8a7795: Add CCREE clock clk: renesas: r8a7795: Add CR clock * clk-stratix10-fixes: : - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents clk: socfpga: stratix10: fix the sdmmc_free_clk mux clk: socfpga: stratix10: fix the parents of mpu_free_clk * clk-atmel-i2s: : - Atmel at91 I2S audio clk support clk: at91: add I2S clock mux driver dt-bindings: clk: at91: add an I2S mux clock
2018-08-14Merge tag 'pm-4.19-rc1' of ↵Linus Torvalds1-0/+56
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new framework for CPU idle time injection, to be used by all of the idle injection code in the kernel in the future, fix some issues and add a number of relatively small extensions in multiple places. Specifics: - Add a new framework for CPU idle time injection (Daniel Lezcano). - Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT). - Add support for current CPU frequency reporting to the ACPI CPPC cpufreq driver (George Cherian). - Rework the cooling device registration in the imx6q/thermal driver (Bastian Stender). - Make the pcc-cpufreq driver refuse to work with dynamic scaling governors on systems with many CPUs to avoid scalability issues with it (Rafael Wysocki). - Fix the intel_pstate driver to report different maximum CPU frequencies on systems where they really are different and to ignore the turbo active ratio if hardware-managend P-states (HWP) are in use; make it use the match_string() helper (Xie Yisheng, Srinivas Pandruvada). - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver (Niklas Cassel). - Add a tracepoint for the tracking of frequency limits changes (from Andriod) to the cpufreq core (Ruchi Kandoi). - Fix a circular lock dependency between CPU hotplug and sysfs locking in the cpufreq core reported by lockdep (Waiman Long). - Avoid excessive error reports on driver registration failures in the ARM cpuidle driver (Sudeep Holla). - Add a new device links flag to the driver core to make links go away automatically on supplier driver removal (Vivek Gautam). - Eliminate potential race condition between system-wide power management transitions and system shutdown (Pingfan Liu). - Add a quirk to save NVS memory on system suspend for the ASUS 1025C laptop (Willy Tarreau). - Make more systems use suspend-to-idle (instead of ACPI S3) by default (Tristian Celestin). - Get rid of stack VLA usage in the low-level hibernation code on 64-bit x86 (Kees Cook). - Fix error handling in the hibernation core and mark an expected fall-through switch in it (Chengguang Xu, Gustavo Silva). - Extend the generic power domains (genpd) framework to support attaching a device to a power domain by name (Ulf Hansson). - Fix device reference counting and user limits initialization in the devfreq core (Arvind Yadav, Matthias Kaehlcke). - Fix a few issues in the rk3399_dmc devfreq driver and improve its documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner). - Drop a redundant error message from the exynos-ppmu devfreq driver (Markus Elfring)" * tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through cpufreq: intel_pstate: Ignore turbo active ratio in HWP cpufreq: Fix a circular lock dependency problem cpu/hotplug: Add a cpus_read_trylock() function x86/power/hibernate_64: Remove VLA usage cpufreq: trace frequency limits change cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC cpufreq: armada-37xx: Add AVS support dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload. PM / devfreq: Init user limits from OPP limits, not viceversa PM / devfreq: rk3399_dmc: fix spelling mistakes. PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer. dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional. PM / devfreq: rk3399_dmc: remove wait for dcf irq event. dt-bindings: clock: add rk3399 DDR3 standard speed bins. ...
2018-08-14Merge tag 'pinctrl-v4.19-1' of ↵Linus Torvalds2-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for v4.19: Core changes: - Augment pinctrl_generic_add_group() and pinmux_generic_add_function() to return the selector for the added group/function to the caller and augment (hopefully) all drivers to handle this New subdrivers: - Qualcomm PM8998 and PM8005 are supported in the SPMI pin control and GPIO driver - Intel Ice Lake PCH (platform controller hub) support - NXP (ex Freescale) i.MX8MQ support - Berlin AS370 support Improvements to drivers: - Support interrupts on the Ocelot pin controller - Add SPI pins to the Uniphier driver - Define a GPIO compatible per SoC in the Tegra driver - Push Tegra initialization down in the initlevels - Support external wakeup interrupts on the Exynos - Add generic clocks pins to the meson driver - Add USB and HSCIF pins for some Renesas PFC chips - Suspend/resume support in the armada-37xx - Interrupt support for the Actions Semiconductor S900 also known as "owl" - Correct the pin ordering in Cedarfork - Debugfs output for INTF in the mcp23s08 driver - Avoid divisions in context save/restore in pinctrl-single The rest is minor bug fixes or cleanups" * tag 'pinctrl-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (69 commits) pinctrl: nomadik: silence uninitialized variable warning pinctrl: axp209: Fix NULL pointer dereference after allocation pinctrl: samsung: Remove duplicated "wakeup" in printk pinctrl: ocelot: add support for interrupt controller pinctrl: intel: Don't shadow error code of gpiochip_lock_as_irq() pinctrl: berlin: fix 'pctrl->functions' allocation in berlin_pinctrl_build_state gpio: tegra: Move driver registration to subsys_init level pinctrl: tegra: Move drivers registration to arch_init level pinctrl: baytrail: actually print the apparently misconfigured pin MAINTAINERS: Replace Heikki as maintainer of Intel pinctrl pinctrl: freescale: off by one in imx1_pinconf_group_dbg_show() pinctrl: uniphier: add spi pin-mux settings pinctrl: cannonlake: Fix community ordering for H variant pinctrl: tegra: define GPIO compatible node per SoC pinctrl: intel: Do pin translation when lock IRQ pinctrl: imx: off by one in imx_pinconf_group_dbg_show() pinctrl: mediatek: include chained_irq.h header pinctrl/amd: only handle irq if it is pending and unmasked pinctrl/amd: fix gpio irq level in debugfs pinctrl: stm32: add syscfg mask parameter ...
2018-08-10Merge branch 'regulator-4.19' into regulator-nextMark Brown3-4/+51
2018-08-10regulator: dt-bindings: add QCOM RPMh regulator bindingsDavid Collins1-0/+36
Introduce bindings for RPMh regulator devices found on some Qualcomm Technlogies, Inc. SoCs. These devices allow a given processor within the SoC to make PMIC regulator requests which are aggregated within the RPMh hardware block along with requests from other processors in the SoC to determine the final PMIC regulator hardware state. Signed-off-by: David Collins <collinsd@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-10Merge tag 'qcom-drivers-for-4.19' of ↵Mark Brown1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into regulator-4.19 for RPMH Qualcomm ARM Based Driver Updates for v4.19 * Add Qualcomm LLCC driver * Add Qualcomm RPMH controller * Fix memleak in Qualcomm RMTFS * Add dummy qcom_scm_assign_mem() * Fix check for global partition in SMEM
2018-08-08regulator: maxim: Add SPDX license identifiersKrzysztof Kozlowski1-4/+1
Replace GPL v2.0 and v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-30BackMerge v4.18-rc7 into drm-nextDave Airlie1-21/+19
rmk requested this for armada and I think we've had a few conflicts build up. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-26dt-bindings: clock: Add S700 support for Actions Semi Soc'sSaravanan Sekar1-0/+118
Add clock bindings constants for action S700 Maintain common clock dt-bindings for Actions Semi SoC's S700 and S900. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-25Merge tag 'samsung-pinctrl-4.19' of ↵Linus Walleij1-5/+2
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers changes for v4.19 1. Add handling of external wakeup interrupts mask inside the pin controller driver. Existing solution is spread between the driver and machine code. The machine code writes the mask but its value is taken from pin controller driver. This moves everything into pin controller driver allowing later to remove the cross-subsystem interaction. Also this is a necessary step for implementing later Suspend to RAM on ARMv8 Exynos5433. 2. Bring necessary suspend/resume callbacks for Exynos542x and Exynos5260. 3. Document hidden requirement about one external wakeup interrupts device node. 4. Minor documentation cleanups.
2018-07-24dt-bindings: pinctrl: samsung: Add SPDX license identifierKrzysztof Kozlowski1-5/+2
Replace GPL license statement with SPDX license identifier (GPL-2.0). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-07-21drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCsLina Iyer1-0/+14
Add controller driver for QCOM SoCs that have hardware based shared resource management. The hardware IP known as RSC (Resource State Coordinator) houses multiple Direct Resource Voter (DRV) for different execution levels. A DRV is a unique voter on the state of a shared resource. A Trigger Control Set (TCS) is a bunch of slots that can house multiple resource state requests, that when triggered will issue those requests through an internal bus to the Resource Power Manager Hardened (RPMH) blocks. These hardware blocks are capable of adjusting clocks, voltages, etc. The resource state request from a DRV are aggregated along with state requests from other processors in the SoC and the aggregate value is applied on the resource. Some important aspects of the RPMH communication - - Requests are <addr, value> with some header information - Multiple requests (upto 16) may be sent through a TCS, at a time - Requests in a TCS are sent in sequence - Requests may be fire-n-forget or completion (response expected) - Multiple TCS from the same DRV may be triggered simultaneously - Cannot send a request if another request for the same addr is in progress from the same DRV - When all the requests from a TCS are complete, an IRQ is raised - The IRQ handler needs to clear the TCS before it is available for reuse - TCS configuration is specific to a DRV - Platform drivers may use DRV from different RSCs to make requests Resource state requests made when CPUs are active are called 'active' state requests. Requests made when all the CPUs are powered down (idle state) are called 'sleep' state requests. They are matched by a corresponding 'wake' state requests which puts the resources back in to previously requested active state before resuming any CPU. TCSes are dedicated for each type of requests. Active mode TCSes (AMC) are used to send requests immediately to the resource, while control TCS are used to provide specific information to the controller. Sleep and Wake TCS send sleep and wake requests, after and before the system halt respectively. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-18dt-bindings: clock: add rk3399 DDR3 standard speed bins.Enric Balletbo i Serra1-0/+56
DDR3 SDRAM Standard (JESD79-3F) defines some standard speed bins for DDR3 memories. The rk3399_dmc driver allows you to pass these values via the device tree. For that purpose the devfreq/rk3399_dmc.txt binding refers to a ddr.h file which does not exist. This patch adds the missing defines in a include file called rk3399-ddr.h with the definition of standard speed bins according to the ARM Trusted Firmware (ATF). Fixes: c1ceb8f7c167 (Documentation: bindings: add dt documentation for rk3399 dmc) Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-07-16pinctrl: at91-pio4: add support for drive strengthLudovic Desroches1-0/+4
Add support for the drive strength configuration. Usually, this value is expressed in mA. Since the numeric value depends on VDDIOP voltage, a value we can't retrieve at runtime, the controller uses low, medium and high to define the drive strength. The PIO controller accepts two values for the low drive configuration: 0 and 1. Most of the time, we don't care about the drive strength. So we keep the default value which is 0. The drive strength is advertised through the sysfs only when it has been explicitly set in the device tree i.e. if its value is different from 0. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-09clk: meson: expose GEN_CLK clkidJerome Brunet2-0/+2
Expose GEN_CLK clock id Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-07dt-bindings: clock: Introduce QCOM Display clock bindingsTaniya Das1-0/+45
Add device tree bindings for display clock controller for Qualcomm Technology Inc's SDM845 SoCs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06clk: imx6sll: add GPIO LPCGsAnson Huang1-1/+8
According to Reference Manual Rev.0, 06/2017, there are GPIO LPCGs defined in CCM CCGRs, add them into clock tree. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06clk: aspeed: Fix SDCLK nameLei YU1-1/+1
The SDCLK was named SDCLKCLK, and no one has used this yet. Fix it. Signed-off-by: Lei YU <mine260309@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06clk: pxa: export 32kHz PLLRobert Jarzmik1-1/+2
This clock is especially used by the RTC driver, so export it so that devicetree users can use it. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06dts: clk: add devicetree bindings for MAX9485Daniel Mack1-0/+18
This patch adds the devicetree bindings for MAX9485, a programmable audio clock generator. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-03clk: rockchip: add dt-binding header for px30Elaine Zhang1-0/+389
Add the dt-bindings header for the px30, that gets shared between the clock controller and the clock references in the dts. Add softreset ID for px30. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-03clk: qcom: Enable clocks which needs to be always on for SDM845Amit Nischal1-0/+2
There are certain clocks which needs to be always enabled for system operation. Add support for the same by adding 'CLK_IS_CRITICAL' flag for such clocks. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-03clk: meson-axg: add pcie and mipi clock bindingsYixun Lan1-0/+3
Add the pcie and mipi clock dt-bindings for the pcie driver. Since the mipi clock isalso used by the pcie driver, we add it together in this patch. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-06-29clk: imx6ul: add GPIO clock gatesAnson Huang1-1/+7
i.MX6UL has GPIO clock gates in CCM CCGR, add them into clock tree for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-29dt-bindings: clock: imx6ul: Do not change the clock definition orderFabio Estevam1-21/+19
Commit f5a4670de966 ("clk: imx: Add new clo01 and clo2 controlled by CCOSR") introduced the CLK_CLKO definitions, but didn't put them at the end of the list, which may cause dtb breakage when running an old dtb with a newer kernel. In order to avoid that, simply add the new CLK_CKO clock definitions at the end of the list. Fixes: f5a4670de966 ("clk: imx: Add new clo01 and clo2 controlled by CCOSR") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-28Merge tag 'drm-misc-next-2018-06-27' of ↵Dave Airlie1-0/+11
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: Cross-subsystem Changes: devicetree documentation dt-bindings defintions for sun8i (Jernej Skrabec) Core Changes: Consider drivers setting DRIVER_ATOMIC as atomic (Eric Anholt) Improvements for in-kernel clients (Noralf Trønnes) Export and rename drm_crtc_port_mask() (Jernej Skrabec) Driver Changes: v3d: Add looking for GPU scheduler jobs management (Eric Anholt) Add Ilitek ILI9881c panel driver(Maxime Ripard) rockchip: vop: fixup linebuffer mode calc error (Sandy Huang) tinydrm: new driver for ILI9341 display panels (David Lechner) sun4i: Add TCON TOP driver (Jernej Skrabec) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628010018.GA10929@juma
2018-06-27dt-bindings: display: sunxi-drm: Add TCON TOP descriptionJernej Skrabec1-0/+11
TCON TOP main purpose is to configure whole display pipeline. It determines relationships between mixers and TCONs, selects source TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder clock source and contains additional TV TCON and DSI gates. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-5-jernej.skrabec@siol.net
2018-06-27clk: sunxi-ng: r40: Export video PLLsJernej Skrabec1-0/+4
Video PLLs need to be referenced in R40 DT as possible HDMI PHY parent. Export them. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-06-22dt-bindings: clock: Add the r9a06g032-sysctrl.h fileMichel Pollet1-0/+148
This adds the constants necessary to use the renesas,r9a06g032-sysctrl node. Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-06-22dt-bindings: clock: add meson axg audio clock controller bindingsJerome Brunet1-0/+94
Export the clock ids dt-bindings usable by the consumers of the clock controller and add the documentation for the device tree bindings of the audio clock controller of the A113 based SoCs. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-06-12Merge tag 'armsoc-drivers' of ↵Linus Torvalds9-0/+188
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This contains platform-related driver updates for ARM and ARM64. Highlights: - ARM SCMI (System Control & Management Interface) driver cleanups - Hisilicon support for LPC bus w/ ACPI - Reset driver updates for several platforms: Uniphier, - Rockchip power domain bindings and hardware descriptions for several SoCs. - Tegra memory controller reset improvements" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits) ARM: tegra: fix compile-testing PCI host driver soc: rockchip: power-domain: add power domain support for px30 dt-bindings: power: add binding for px30 power domains dt-bindings: power: add PX30 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3228 dt-bindings: power: add binding for rk3228 power domains dt-bindings: power: add RK3228 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3128 dt-bindings: power: add binding for rk3128 power domains dt-bindings: power: add RK3128 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3036 dt-bindings: power: add binding for rk3036 power domains dt-bindings: power: add RK3036 SoCs header for power-domain dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Register SMMU after MC driver became ready soc: mediatek: remove unneeded semicolon soc: mediatek: add a fixed wait for SRAM stable soc: mediatek: introduce a CAPS flag for scp_domain_data soc: mediatek: reuse regmap_read_poll_timeout helpers ...
2018-06-12Merge tag 'armsoc-soc' of ↵Linus Torvalds2-0/+48
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Here are the main updates for SoC support (besides DT additions) for ARM 32- and 64-bit platforms. The branch also contains defconfig updates to turn on drivers and options as needed on the various platforms. The largest parts of the delta are from cleanups moving platform data and board file setup of TI platforms to ti-sysc bus drivers. There are also some sweeping changes of eeprom and nand setup on Davinci, i.MX and other platforms. Samsung is removing support for Exynos5440, which was an oddball SoC that hasn't been seen much use in designs. Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D). Linus Walleij is also removing support for ux500 (Sony Ericsson) U8540/9540 SoCs that never made it to significant mass production and products" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) MAINTAINERS: add NXP linux team maillist as i.MX reviewer ARM: stm32: Don't select DMA unconditionally on STM32MP157C arm64: defconfig: Enable PCIe on msm8996 and db820c ARM: pxa3xx: enable external wakeup pins ARM: pxa: stargate2: use device properties for at24 eeprom arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 ARM: berlin: switch to SPDX license identifier arm: berlin: remove non-necessary flush_cache_all() ARM: berlin: extend BG2CD Kconfig entry OMAP: CLK: CLKSRC: Add suspend resume hooks ARM: AM43XX: Add functions to save/restore am43xx control registers ASoC: ams_delta: use GPIO lookup table ARM: OMAP1: ams-delta: add GPIO lookup tables bus: ti-sysc: Fix optional clocks array access ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore ...
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds23-33/+938
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-06-07Merge tag 'pinctrl-v4.18-1' of ↵Linus Torvalds1-3/+87
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for v4.18. No core changes this time! Just a calm all-over-the-place drivers, updates and fixes cycle as it seems. New drivers/subdrivers: - Actions Semiconductor S900 driver with more Actions variants for S700, S500 in the pipe. Also generic GPIO support on top of the same driver and IRQ support is in the pipe. - Renesas r8a77470 PFC support. - Renesas r8a77990 PFC support. - Allwinner Sunxi H6 R_PIO support. - Rockchip PX30 support. - Meson Meson8m2 support. - Remove support for the ill-fated Samsung Exynos 5440 SoC. Improvements: - Context save/restore support in pinctrl-single. - External interrupt support for the Mediatek MT7622. - Qualcomm ACPI HID QCOM8002 supported. Fixes: - Fix up suspend/resume support for Exynos 5433. - Fix Strago DMI fixes on the Intel Cherryview" * tag 'pinctrl-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: cherryview: limit Strago DMI workarounds to version 1.0 pinctrl: at91-pio4: add missing of_node_put pinctrl: armada-37xx: Fix spurious irq management gpiolib: discourage gpiochip_add_pin[group]_range for DT pinctrls pinctrl: msm: fix gpio-hog related boot issues MAINTAINERS: update entry for Mediatek pin controller pinctrl: mediatek: remove unused fields in struct mtk_eint_hw pinctrl: mediatek: use generic EINT register maps for each SoC pinctrl: mediatek: add EINT support to MT7622 SoC pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit dt-bindings: pinctrl: add external interrupt support to MT7622 pinctrl pinctrl: freescale: Switch to SPDX identifier pinctrl: samsung: Fix suspend/resume for Exynos5433 GPF1..5 banks pinctrl: sh-pfc: rcar-gen3: Fix grammar in static pin comments pinctrl: sh-pfc: r8a77965: Add I2C pin support pinctrl: sh-pfc: r8a77990: Add EthernetAVB pins, groups and functions pinctrl: sh-pfc: r8a77990: Add I2C{1,2,4,5,6,7} pins, groups and functions pinctrl: sh-pfc: r8a77990: Add SCIF pins, groups and functions pinctrl: sh-pfc: r8a77990: Add bias pinconf support pinctrl: sh-pfc: Initial R8A77990 PFC support ...
2018-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+21
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-06Merge tag 'sound-4.18-rc1' of ↵Linus Torvalds5-0/+193
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "We've got many code additions at this cycle as a result of quite a few new drivers. Below are highlights: Core stuff: - Fix the long-standing issue with the device registration order; the control device is now registered at last - PCM locking code cleanups for RT kernels - Fixes for possible races in ALSA timer resolution accesses - TLV offset definitions in uapi ASoC: - Many fixes for the topology stuff, including fixes for v4 ABI compatibility - Lots of cleanups / quirks for Intel platforms based on Realtek CODECs - Continued componentization works, removing legacy CODEC stuff - Conversion of OMAP DMA to the new, more standard SDMA-PCM driver - Fixes and updates to Cirrus Logic SoC drivers - New Qualcomm DSP support - New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306 and RT5668 and TI TSCS454 HD-audio: - Finally better support for some CA0132 boards, allowing Windows firmware - HP Spectre x360 support along with a bulk of COEF stuff - Blacklisting power save default some known boards reported on Fedora USB-audio: - Continued improvements on UAC3 support; now BADD is supported - Fixes / improvements for Dell WD15 dock - Allow DMA coherent pages for PCM buffers for ARCH, MIPS & co Others: - New Xen sound frontend driver support - Cache implementation and other improvements for FireWire DICE - Conversions to octal permissions in allover places" * tag 'sound-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (386 commits) ASoC: dapm: delete dapm_kcontrol_data paths list before freeing it ALSA: usb-audio: remove redundant check on err ASoC: topology: Move skl-tplg-interface.h to uapi ASoC: topology: Move v4 manifest header data structures to uapi ASoC: topology: Improve backwards compatibility with v4 topology files ALSA: pci/hda: Remove unused, broken, header file ASoC: TSCS454: Add Support ASoC: Intel: kbl: Move codec sysclk config to codec_init function ASoC: simple-card: set cpu dai clk in hw_params ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream() ALSA: oxygen: use match_string() helper ASoC: dapm: use match_string() helper ASoC: max98095: use match_string() helper ASoC: max98088: use match_string() helper ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks ASoC: mt6797-mt6351: add hostless phone call path ASoC: mt6797: add Hostless DAI ASoC: mt6797: add PCM interface ASoC: mediatek: export mtk-afe symbols as needed ASoC: codecs: PCM1789: include gpio/consumer.h ...
2018-06-06Merge tag 'usb-4.18-rc1' of ↵Linus Torvalds1-0/+37
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and PHY updates from Greg KH: "Here is the big USB pull request for 4.18-rc1. Lots of stuff here, the highlights are: - phy driver updates and new additions - usual set of xhci driver updates - normal set of musb updates - gadget driver updates and new controllers - typec work, it's getting closer to getting fully out of the staging portion of the tree. - lots of minor cleanups and bugfixes. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue" xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers xhci: Allow more than 32 quirks usb: xhci: force all memory allocations to node selftests: add test for USB over IP driver USB: typec: fsusb302: no need to check return value of debugfs_create_dir() USB: gadget: udc: s3c2410_udc: no need to check return value of debugfs_create functions USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_create functions USB: gadget: udc: pxa27x_udc: no need to check return value of debugfs_create functions USB: gadget: udc: gr_udc: no need to check return value of debugfs_create functions USB: gadget: udc: bcm63xx_udc: no need to check return value of debugfs_create functions USB: udc: atmel_usba_udc: no need to check return value of debugfs_create functions USB: dwc3: no need to check return value of debugfs_create functions USB: dwc2: no need to check return value of debugfs_create functions USB: core: no need to check return value of debugfs_create functions USB: chipidea: no need to check return value of debugfs_create functions USB: ehci-hcd: no need to check return value of debugfs_create functions USB: fhci-hcd: no need to check return value of debugfs_create functions USB: fotg210-hcd: no need to check return value of debugfs_create functions USB: imx21-hcd: no need to check return value of debugfs_create functions ...
2018-06-06Merge tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds1-0/+49
Pull MMC updates from Ulf Hansson: "MMC core: - Decrease polling rate for erase/trim/discard - Allow non-sleeping GPIOs for card detect - Improve mmc block removal path - Enable support for mmc_sw_reset() for SDIO cards - Add mmc_sw_reset() to allow users to do a soft reset of the card - Allow power delay to be tunable via DT - Allow card detect debounce delay to be tunable via DT - Enable new quirk to limit clock rate for Marvell 8887 chip - Don't show eMMC RPMB and BOOT areas in /proc/partitions - Add capability to avoid 3.3V signaling for fragile HWs MMC host: - Improve/fixup support for handle highmem pages - Remove depends on HAS_DMA in case of platform dependency - mvsdio: Enable support for erase/trim/discard - rtsx_usb: Enable support for erase/trim/discard - renesas_sdhi: Fix WP logic regressions - renesas_sdhi: Add r8a77965 support - renesas_sdhi: Add R8A77980 to whitelist - meson: Add optional support for device reset - meson: Add support for the Meson-AXG platform - dw_mmc: Add new driver for BlueField DW variant - mediatek: Add support for 64G DRAM DMA - sunxi: Deploy runtime PM support - jz4740: Add support for JZ4780 - jz4740: Enable support for DT based platforms - sdhci: Various improvement to timeout handling - sdhci: Disable support for HS200/HS400/UHS when no 1.8V support - sdhci-omap: Add support for controller in k2g SoC - sdhci-omap: Add workarounds for a couple of Erratas - sdhci-omap: Enable support for generic sdhci DT properties - sdhci-cadence: Re-send tune request to deal with errata - sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers - sdhci-pci: Avoid 3.3V signaling on some NI 904x - sdhci-esdhc-imx: Use watermark levels for PIO access - sdhci-msm: Improve card detection handling - sdhci-msm: Add support voltage pad switching" * tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (104 commits) mmc: renesas_sdhi: really fix WP logic regressions mmc: mvsdio: Enable MMC_CAP_ERASE mmc: mvsdio: Respect card busy time out from mmc core mmc: sdhci-msm: Remove NO_CARD_NO_RESET quirk mmc: sunxi: Use ifdef rather than __maybe_unused mmc: mxmmc: Use ifdef rather than __maybe_unused mmc: mxmmc: include linux/highmem.h mmc: sunxi: mark PM functions as __maybe_unused mmc: Throttle calls to MMC_SEND_STATUS during mmc_do_erase() mmc: au1xmmc: handle highmem pages mmc: Allow non-sleeping GPIO cd mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails mmc: sd: Define name for default speed dtr mmc: core: Move calls to ->prepare_hs400_tuning() closer to mmc code mmc: sdhci-xenon: use match_string() helper mmc: wbsd: handle highmem pages mmc: ushc: handle highmem pages mmc: mxcmmc: handle highmem pages mmc: atmel-mci: use sg_copy_{from,to}_buffer mmc: android-goldfish: use sg_copy_{from,to}_buffer ...
2018-06-04Merge branches 'clk-davinci-psc-da830', 'clk-renesas', 'clk-at91-recalc', ↵Stephen Boyd6-0/+147
'clk-davinci' and 'clk-meson' into clk-next * clk-davinci-psc-da830: clk: davinci: psc-da830: fix USB0 48MHz PHY clock registration * clk-renesas: clk: renesas: cpg-mssr: Add support for R-Car E3 clk: renesas: Add r8a77990 CPG Core Clock Definitions clk: renesas: rcar-gen2: Centralize quirks handling clk: renesas: r8a77980: Correct parent clock of PCIEC0 clk: renesas: r8a7794: Fix LB clock divider clk: renesas: r8a7792: Fix LB clock divider clk: renesas: r8a7791/r8a7793: Fix LB clock divider clk: renesas: r8a7745: Fix LB clock divider clk: renesas: r8a7743: Fix LB clock divider clk: renesas: cpg-mssr: Add r8a77470 support clk: renesas: Add r8a77470 CPG Core Clock Definitions clk: renesas: r8a77965: Add MSIOF controller clocks * clk-at91-recalc: clk: at91: PLL recalc_rate() now using cached MUL and DIV values * clk-davinci: clk: davinci: Fix link errors when not all SoCs are enabled clk: davinci: psc: allow for dev == NULL clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE clk: davinci: pll: allow dev == NULL clk: davinci: psc-dm365: fix few clocks clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabled clk: davinci: psc-dm355: fix ASP0/1 clkdev lookups clk: davinci: pll-dm355: fix SYSCLKn parent names clk: davinci: pll-dm355: drop pll2_sysclk2 * clk-meson: clk: meson: axg: let mpll clocks round closest clk: meson: mpll: add round closest support clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL clk: meson: use SPDX license identifiers consistently clk: meson: drop CLK_SET_RATE_PARENT flag clk: meson-axg: Add AO Clock and Reset controller driver clk: meson: aoclk: refactor common code into dedicated file clk: meson: migrate to devm_of_clk_add_hw_provider API clk: meson: gxbb: add the video decoder clocks clk: meson: meson8b: add support for the NAND clocks dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC clk: meson: gxbb: expose VDEC_1 and VDEC_HEVC clocks dt-bindings: clock: meson8b: export the NAND clock
2018-06-04Merge branch 'clk-qcom-sdm845' into clk-nextStephen Boyd2-0/+274
* clk-qcom-sdm845: clk: qcom: Export clk_fabia_pll_configure() clk: qcom: Add video clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Video clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SDM845 clk: qcom: Add DT bindings for SDM845 gcc clock controller clk: qcom: Configure the RCGs to a safe source as needed clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks clk: qcom: Simplify gdsc status checking logic clk: qcom: gdsc: Add support to poll CFG register to check GDSC state clk: qcom: gdsc: Add support to poll for higher timeout value clk: qcom: gdsc: Add support to reset AON and block reset logic clk: qcom: Add support for controlling Fabia PLL clk: qcom: Clear hardware clock control bit of RCG Also fixup the Kconfig mess where SDM845 GCC has msm8998 in the description and also the video Kconfig says things slightly differently from the GCC one so just make it the same.
2018-06-04Merge branches 'clk-match-string', 'clk-ingenic', 'clk-si544-round-fix' and ↵Stephen Boyd1-7/+17
'clk-bcm-stingray' into clk-next * clk-match-string: clk: use match_string() helper clk: bcm2835: use match_string() helper * clk-ingenic: clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted * clk-si544-round-fix: clk-si544: Properly round requested frequency to nearest match * clk-bcm-stingray: clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc
2018-06-04Merge branches 'clk-imx7d', 'clk-hisi-stub', 'clk-mvebu', 'clk-imx6-epit' ↵Stephen Boyd1-1/+3
and 'clk-debugfs-simple' into clk-next * clk-imx7d: clk: imx7d: reset parent for mipi csi root clk: imx7d: fix mipi dphy div parent * clk-hisi-stub: clk/driver/hisi: Consolidate the Kconfig for the CLOCK_STUB * clk-mvebu: clk: mvebu: use correct bit for 98DX3236 NAND * clk-imx6-epit: clk: imx6: add EPIT clock support * clk-debugfs-simple: clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions
2018-06-04Merge branches 'clk-imx6sx', 'clk-imx7d-enet' and 'clk-aspeed-24' into clk-nextStephen Boyd3-3/+8
* clk-imx6sx: clk: imx6sl: correct ocram_podf clock type clk: imx6sx: disable unnecessary clocks during clock initialization clk: imx6sx: add missing lvds2 clock to the clock tree * clk-imx7d-enet: ARM: dts: imx7: correct enet ipg clock clk: imx7d: correct enet clock CCGR registers clk: imx7d: correct enet phy ref clock gates * clk-aspeed-24: clk: aspeed: Add 24MHz fixed clock
2018-06-04Merge branches 'clk-allwinner', 'clk-rockchip', 'clk-tegra', 'clk-berlin' ↵Stephen Boyd2-0/+41
and 'clk-qcom-mmagic' into clk-next * clk-allwinner: clk: sunxi-ng: r40: export a regmap to access the GMAC register clk: sunxi-ng: r40: rewrite init code to a platform driver clk: sunxi-ng: add support for H6 PRCM CCU * clk-rockchip: clk: rockchip: remove deprecated gate-clk code and dt-binding clk: rockchip: use match_string() helper * clk-tegra: clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20 clk: tegra20: Correct parents of CDEV1/2 clocks clk: tegra20: Add DEV1/DEV2 OSC dividers * clk-berlin: clk: berlin: switch to SPDX license identifier * clk-qcom-mmagic: clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled clk: qcom: Register the gdscs before the clocks clk: qcom: gdsc: Add support for ALWAYS_ON gdscs
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 14:55:14 +0300