summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)AuthorFilesLines
2023-07-04Merge tag 'clk-for-linus' of ↵Linus Torvalds2-0/+53
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "Another set of clk driver updates and fixes for the merge window. The driver updates needed more time to bake in linux-next. Updates: - Support for more clk controllers in Qualcomm SoCs such as SM8350, SM8450, SDX75, SC8280XP, and IPQ9574 - Runtime PM enablement of some more Qualcomm clk controllers - Various fixes to Qualcomm clk driver data to use correct clk_ops and to check halt bits properly - AT91 updates to modernize with clk_parent_data structures Fixes: - Remove 'syscon' from dt binding fix for ti,j721e-system-controller - Fix determine rate in the Tegra driver that got wrecked by the refactorting of muxes this merge window" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits) clk: tegra: Avoid calling an uninitialized function dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id clk: at91: sama7g5: switch to parent_hw and parent_data clk: at91: sckc: switch to parent_data/parent_hw clk: at91: clk-sam9x60-pll: add support for parent_hw clk: at91: clk-utmi: add support for parent_hw clk: at91: clk-system: add support for parent_hw clk: at91: clk-programmable: add support for parent_hw clk: at91: clk-peripheral: add support for parent_hw clk: at91: clk-master: add support for parent_hw clk: at91: clk-generated: add support for parent_hw clk: at91: clk-main: add support for parent_data/parent_hw clk: qcom: gcc-sc8280xp: Add runtime PM clk: qcom: gpucc-sc8280xp: Add runtime PM clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags clk: qcom: gpucc-sm6375: Enable runtime pm dt-bindings: clock: sm6375-gpucc: Add VDD_GX clk: qcom: gcc-sm6115: Add missing PLL config properties clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi) ...
2023-07-03Merge tag 'char-misc-6.5-rc1' of ↵Linus Torvalds2-0/+74
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull Char/Misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem updates for 6.5-rc1. Lots of different, tiny, stuff in here, from a range of smaller driver subsystems, including pulls from some substems directly: - IIO driver updates and additions - W1 driver updates and fixes (and a new maintainer!) - FPGA driver updates and fixes - Counter driver updates - Extcon driver updates - Interconnect driver updates - Coresight driver updates - mfd tree tag merge needed for other updates on top of that, lots of small driver updates as patches, including: - static const updates for class structures - nvmem driver updates - pcmcia driver fix - lots of other small driver updates and fixes All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits) bsr: fix build problem with bsr_class static cleanup comedi: make all 'class' structures const char: xillybus: make xillybus_class a static const structure xilinx_hwicap: make icap_class a static const structure virtio_console: make port class a static const structure ppdev: make ppdev_class a static const structure char: misc: make misc_class a static const structure /dev/mem: make mem_class a static const structure char: lp: make lp_class a static const structure dsp56k: make dsp56k_class a static const structure bsr: make bsr_class a static const structure oradax: make 'cl' a static const structure hwtracing: hisi_ptt: Fix potential sleep in atomic context hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU hwtracing: hisi_ptt: Export available filters through sysfs hwtracing: hisi_ptt: Add support for dynamically updating the filter list hwtracing: hisi_ptt: Factor out filter allocation and release operation samples: pfsm: add CC_CAN_LINK dependency misc: fastrpc: check return value of devm_kasprintf() coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable() ...
2023-07-03Merge tag 'leds-next-6.5' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "New Drivers: - Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs - Add support for Awinic AW20036/AW20054/AW20072 LEDs New Device Support: - Add support for PMI632 LPG to QCom LPG - Add support for PMI8998 to QCom Flash - Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC New Functionality: - Implement the LP55xx Charge Pump - Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC - Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC - Enable per-pin resolution Pinctrl in LEDs GPIO Fix-ups: - Allow thread to sleep by switching from spinlock to mutex - Add lots of Device Tree bindings / support - Adapt relationships / dependencies driven by Kconfig - Switch I2C drivers from .probe_new() to .probe() - Remove superfluous / duplicate code - Replace strlcpy() with strscpy() for efficiency and overflow prevention - Staticify various functions - Trivial: Fixing coding style - Simplify / reduce code Bug Fixes: - Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename - Repair race between led_set_brightness(LED_{OFF,FULL}) - Fix Oops relating to sleeping in critical sections - Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger - Do not leak resources in error handling paths - Fix unsigned comparison which can never be negative - Provide missing NULL terminating entries in tables - Fix misnaming issues" * tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits) leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks leds: sgm3140: Add richtek,rt5033-led compatible dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks" dt-bindings: leds: Drop unneeded quotes leds: Fix config reference for AW200xx driver leds: leds-mt6323: Add support for WLEDs and MT6332 leds: leds-mt6323: Add support for MT6331 leds leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro leds: leds-mt6323: Drop MT6323_ prefix from macros and defines leds: leds-mt6323: Specify registers and specs in platform data dt-bindings: leds: leds-mt6323: Document mt6332 compatible dt-bindings: leds: leds-mt6323: Document mt6331 compatible leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches leds: simatic-ipc-leds-gpio: Split up into multiple drivers leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative leds: cht-wcove: Remove unneeded semicolon leds: cht-wcove: Fix an unsigned comparison which can never be negative ...
2023-07-03Merge tag 'mfd-next-6.5' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for TI TPS6594/TPS6593/LP8764 PMICs - Add support for Samsung RT5033 Battery Charger - Add support for Analog Devices MAX77540 and MAX77541 PMICs New Device Support: - Add support for SPI to Rockchip RK808 (and friends) - Add support for AXP192 PMIC to X-Powers AXP20X - Add support for AXP313a PMIC to X-Powers AXP20X - Add support for RK806 to Rockchip RK8XX Removed Device Support: - Removed MFD support for Richtek RT5033 Battery Fix-ups: - Remove superfluous code - Switch I2C drivers from .probe_new() to .probe() - Convert over to managed resources (devm_*(), etc) - Use dev_err_probe() for returning errors from .probe() - Add lots of Device Tree bindings / support - Improve cache efficiency by switching to Maple - Use own exported namespaces (NS) - Include missing and remove superfluous headers - Start using / convert to the new shutdown sys-off API - Trivial: variable / define renaming - Make use of of_property_read_reg() when requesting DT 'reg's Bug Fixes: - Fix chip revision readout due to incorrect data masking - Amend incorrect register and mask values used for charger state - Hide unused functionality at compile time - Fix resource leaks following error handling routines - Return correct error values and fix error handling in general - Repair incorrect device names - used for device matching - Remedy broken module auto-loading" * tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits) dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540 iio: adc: max77541: Add ADI MAX77541 ADC Support regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator mfd: Switch two more drivers back to use struct i2c_driver::probe dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties mfd: stmpe: Only disable the regulators if they are enabled mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes mfd: core: Use of_property_read_reg() to parse "reg" mfd: stmfx: Nullify stmfx->vdd in case of error mfd: stmfx: Fix error path in stmfx_chip_init mfd: intel-lpss: Add missing check for platform_get_resource mfd: stpmic1: Add PMIC poweroff via sys-off handler mfd: stpmic1: Fixup main control register and bits naming dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074 mfd: tps65219: Add support for soft shutdown via sys-off API mfd: pm8008: Drop bogus i2c module alias mfd: pm8008: Fix module autoloading mfd: tps65219: Add GPIO cell instance ...
2023-07-01Merge tag 'pinctrl-v6.5-1' of ↵Linus Torvalds1-60/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time New drivers: - Tegra234 support - Qualcomm IPQ5018 support - Intel Meteor Lake-S support - Qualcomm SDX75 subdriver - Qualcomm SPMI-based PM8953 support Improvements: - Fix up support for GPIO3 on the AXP209 - Push-pull drive configuration support for the AT91 PIO4 - Fix misc non-urgent bugs in the AMD driver - Misc non-urgent improved error handling - Misc janitorial and minor improvements" * tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits) pinctrl: cherryview: Drop goto label pinctrl: baytrail: invert if condition pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook pinctrl: tegra: avoid duplicate field initializers dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function pinctrl: mlxbf3: remove broken Kconfig 'select' pinctrl: spear: Remove unused of_gpio.h inclusion pinctrl: lantiq: Remove unused of_gpio.h inclusion pinctrl: at91-pio4: check return value of devm_kasprintf() pinctrl: microchip-sgpio: check return value of devm_kasprintf() pinctrl: freescale: Fix a memory out of bounds when num_configs is 1 pinctrl: intel: refine ->irq_set_type() hook pinctrl: intel: refine ->set_mux() hook pinctrl: baytrail: Use str_hi_lo() helper lib/string_choices: Add str_high_low() helper lib/string_helpers: Split out string_choices.h lib/string_helpers: Add missing header files to MAINTAINERS database pinctrl: npcm7xx: Add missing check for ioremap pinctrl:sunplus: Add check for kmalloc ...
2023-06-30Merge tag 'soc-drivers-6.5' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Nothing surprising in the SoC specific drivers, with the usual updates: - Added or improved SoC driver support for Tegra234, Exynos4121, RK3588, as well as multiple Mediatek and Qualcomm chips - SCMI firmware gains support for multiple SMC/HVC transport and version 3.2 of the protocol - Cleanups amd minor changes for the reset controller, memory controller, firmware and sram drivers - Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm, amlogic and renesas SoC specific drivers" * tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits) dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding MAINTAINERS: add PHY-related files to Amlogic SoC file list drivers: meson: secure-pwrc: always enable DMA domain tee: optee: Use kmemdup() to replace kmalloc + memcpy soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer dt-bindings: sram: qcom,imem: document qdu1000 soc: qcom: icc-bwmon: Fix MSM8998 count unit dt-bindings: soc: qcom,rpmh-rsc: Require power-domains soc: qcom: socinfo: Add Soc ID for IPQ5300 dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300 soc: qcom: Fix a IS_ERR() vs NULL bug in probe soc: qcom: socinfo: Add support for new fields in revision 19 soc: qcom: socinfo: Add support for new fields in revision 18 dt-bindings: firmware: scm: Add compatible for SDX75 soc: qcom: mdt_loader: Fix split image detection dt-bindings: memory-controllers: drop unneeded quotes soc: rockchip: dtpm: use C99 array init syntax firmware: tegra: bpmp: Add support for DRAM MRQ GSCs soc/tegra: pmc: Use devm_clk_notifier_register() soc/tegra: pmc: Simplify debugfs initialization ...
2023-06-30Merge tag 'soc-newsoc-6.5' of ↵Linus Torvalds3-0/+364
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone" * tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) clk: nuvoton: Use clk_parent_data instead of string for parent clock clk: nuvoton: Update all constant hex values to lowercase clk: nuvoton: Add clk-ma35d1.h for driver extern functions remoteproc: stm32: use correct format strings on 64-bit MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE arm64: defconfig: enable ARCH_STM32 and STM32 serial driver arm64: dts: st: add stm32mp257f-ev1 board support dt-bindings: stm32: document stm32mp257f-ev1 board arm64: dts: st: introduce stm32mp25 pinctrl files arm64: dts: st: introduce stm32mp25 SoCs family arm64: introduce STM32 family on Armv8 architecture dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon pinctrl: stm32: add stm32mp257 pinctrl support dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages Documentation/process: add soc maintainer handbook reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35 reset: Add Nuvoton ma35d1 reset driver support clk: nuvoton: Add clock driver for ma35d1 clock controller arm64: dts: nuvoton: Add initial ma35d1 device tree dt-bindings: serial: Document ma35d1 uart controller ...
2023-06-30Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds12-26/+425
Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files, which are all moved to a new location, using separate subdirectories for each SoC vendor, following the same scheme that is used on arm64, mips and riscv. This has been discussed for many years, but so far we never did this as there was a plan to move the files out of the kernel entirely, which has never happened. The impact of this will be that all external patches no longer apply, and anything depending on the location of the dtb files in the build directory will have to change. The installed files after 'make dtbs_install' keep the current location. There are six added SoCs here that are largely variants of previously added chips. Two other chips are added in a separate branch along with their device drivers. - The Samsung Exynos 4212 makes its return after the Samsung Galaxy Express phone is addded at last. The SoC support was originally added in 2012 but removed again in 2017 as it was unused at the time. - Amlogic C3 is a Cortex-A35 based smart IP camera chip - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of the still common MSM8916 (Snapdragon 410) phone chip that has been supported for a long time. - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end laptop chips, used in the Lenovo Flex 5G, which is added along with the reference board. - Qualcomm SDX75 is the latest generation modem chip that is used as a peripherial in phones but can also run a standalone Linux. Unlike the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55. - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie C910 core, a step up from all previously added rv64 chips. All of the above come with reference board implementations, those included there are 39 new board files, but only five more 32-bit this time, probably a new low: - Marantec Maveo board based on dhcor imx6ull module - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip - Epson Moverio BT-200 AR glasses based on TI OMAP4 - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM - ICnova ADB4006 board based on Allwinner A20 On the 64-bit side, there are also fewer addded machines than we had in the recent releases: - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device. - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234 - Qualcomm gains support for 6 reference boards on various members of their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top of the various reference platforms for their new chips. - Rockchips support for several newer boards: Indiedroid Nova (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S (rk3568) - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin family with AM62 COM, carrier and dev boards Other changes to existing boards contain the usual minor improvements along with - continued updates to clean up dts files based on dtc warnings and binding checks, in particular cache properties and node names - support for devicetree overlays on at91, bcm283x - significant additions to existing SoC support on mediatek, qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1 As usual, a lot more detail is available in the individual merge commits" * tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits) ARM: mvebu: fix unit address on armada-390-db flash ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards arm: dts: Enable device-tree overlay support for AT91 boards arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller ARM: dts: at91: use generic name for shutdown controller ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML riscv: dts: sort makefile entries by directory riscv: defconfig: enable T-HEAD SoC MAINTAINERS: add entry for T-HEAD RISC-V SoC riscv: dts: thead: add sipeed Lichee Pi 4A board device tree riscv: dts: add initial T-HEAD TH1520 SoC device tree riscv: Add the T-HEAD SoC family Kconfig option ...
2023-06-29Merge tag 'sound-6.5-rc1' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Lots of changes as usual, but the only significant stuff in ALSA core part is the MIDI 2.0 support, while ASoC core kept receiving the code refactoring. The majority of changes are seen rather in device drivers, and quite a few new drivers can be found there. Here we go, some highlights: ALSA and ASoC Core: - Support of MIDI 2.0 devices: rawmidi and sequencer API have been extended for the support of the new UMP (Universal MIDI Packet) protocol, USB audio driver got the USB MIDI 2.0 interface support - Continued refactoring around ASoC DAI links and the ordering of trigger callbacks - PCM ABI extension for better drain support ASoC Drivers: - Conversions of many drivers to use maple tree based caches - Everlasting improvement works on ASoC Intel drivers - Compressed audio support for Qualcomm - Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon, Ingenic X1000, Intel systems with various CODECs, Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781 HD-audio: - Quirks for HP and ASUS machines - CS35L41 HD-audio codec fixes - Loongson HD-audio support Misc: - A new virtual PCM test driver for kselftests - Continued refactoring and improvements on the legacy emu10k1 driver" * tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits) ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook ASoC: hdmi-codec: fix channel info for compressed formats ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats ASoC: core: Always store of_node when getting DAI link component ASoC: tas2781: Fix error code in tas2781_load_calibration() ASoC: amd: update pm_runtime enable sequence ALSA: ump: Export MIDI1 / UMP conversion helpers ASoC: tas2781: fix Kconfig dependencies ASoC: amd: acp: remove acp poweroff function ASoC: amd: acp: clear pdm dma interrupt mask ASoC: codecs: max98090: Allow dsp_a mode ASoC: qcom: common: add default jack dapm pins ASoC: loongson: fix address space confusion ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints ASoC: tegra: Remove stale comments in AHUB ASoC: tegra: Use normal system sleep for ASRC ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio ASoC: fsl-asoc-card: Allow passing the number of slots in use ASoC: codecs: wsa884x: Add WSA884x family of speakers ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers ...
2023-06-29Merge tag 'clk-for-linus' of ↵Linus Torvalds5-5/+145
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This batch of clk driver updates contains almost no new SoC support. Instead there's a treewide patch series from Maxime that makes clk_ops::determine_rate mandatory for muxes. Beyond that core framework change we have the usual pile of clk driver updates such as migrating i2c drivers to use .probe() again or YAMLfication of clk DT bindings so we can validate DTBs. Overall the SoCs that got the most updates this time around in terms of diffstat are the Amlogic and Mediatek drivers because they added new SoC support or fixed up various drivers to have proper data. In general things look kinda quiet. I suspect the core framework change may still shake out some problems after the merge window, mostly because not everyone tests linux-next where that series has been for some number of weeks. I saw that there's at least one pending fix for Tegra that needs to be wrapped up into a proper patch. I'll try to catch those bits before the window closes so that -rc1 is bootable. More details below. Core: - Make clk_ops::determine_rate mandatory for muxes New Drivers: - Add amlogic a1 SoC family PLL and peripheral clock controller support Updates: - Handle allocation failures from kasprintf() and friends - Migrate platform clk drivers to .remove_new() - Migrate i2c clk drivers to .probe() instead of .probe_new() - Remove CLK_SET_PARENT from all Mediatek MSDC core clocks - Add infra_ao reset support for Mediatek MT8188 SoCs - Align driver_data to i2c_device_id tables in some i2c clk drivers - Use device_get_match_data() in vc5 clk driver - New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip FPGA clock drivers - Use of_property_read_bool() to read "microchip,pic32mzda-sosc" boolean DT property in clk-pic32mzda - Convert AT91 clock dt-bindings to YAML - Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX - Keep i.MX UART clocks enabled during kernel boot if earlycon is set - Drop imx_unregister_clocks() as there are no users anymore - Switch to _safe iterator on imx_clk_scu_unregister() to avoid use after free - Add determine_rate op to the imx8m composite clock - Use device managed API for iomap and kzalloc for i.MXRT1050, i.MX8MN, i.MX8MP and i.MX93 clock controller drivers - Add missing interrupt DT property for the i.MX8M clock controller - Re-add support for Exynos4212 clock controller because we are re-introducing the SoC in the mainline - Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve some objtool warnings - Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC - Convert the Renesas clock drivers to readl_poll_timeout_atomic() - Add PWM clock on Renesas R-Car V3U - Fix PLL5 on Renesas RZ/G2L and RZ/V2L" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits) clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro clk: Fix memory leak in devm_clk_notifier_register() clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes clk: mvebu: Use of_get_cpu_hwid() to read CPU ID MAINTAINERS: Add Marvell mvebu clock drivers clk: clocking-wizard: check return value of devm_kasprintf() clk: ti: clkctrl: check return value of kasprintf() clk: keystone: sci-clk: check return value of kasprintf() clk: si5341: free unused memory on probe failure clk: si5341: check return value of {devm_}kasprintf() clk: si5341: return error if one synth clock registration fails clk: cdce925: check return value of kasprintf() clk: vc5: check memory returned by kasprintf() clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks clk: keystone: syscon-clk: Add support for audio refclk dt-bindings: clock: Add binding documentation for TI Audio REFCLK dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible clk: keystone: syscon-clk: Allow the clock node to not be of type syscon ...
2023-06-27Merge branches 'clk-qcom' and 'clk-microchip' into clk-nextStephen Boyd10-0/+422
* clk-qcom: (63 commits) clk: qcom: gcc-sc8280xp: Add runtime PM clk: qcom: gpucc-sc8280xp: Add runtime PM clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags clk: qcom: gpucc-sm6375: Enable runtime pm dt-bindings: clock: sm6375-gpucc: Add VDD_GX clk: qcom: gcc-sm6115: Add missing PLL config properties clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi) clk: qcom: gcc-ipq6018: remove duplicate initializers clk: qcom: gcc-ipq9574: Enable crypto clocks dt-bindings: clock: Add crypto clock and reset definitions clk: qcom: Add lpass audio clock controller driver for SC8280XP clk: qcom: Add lpass clock controller driver for SC8280XP dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226 clk: qcom: gpucc-sm8550: Add support for graphics clock controller clk: qcom: Add support for SM8450 GPUCC clk: qcom: gcc-sm8450: Enable hw_clk_ctrl clk: qcom: rcg2: Make hw_clk_ctrl toggleable dt-bindings: clock: qcom: Add SM8550 graphics clock controller ... * clk-microchip: clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id clk: at91: sama7g5: switch to parent_hw and parent_data clk: at91: sckc: switch to parent_data/parent_hw clk: at91: clk-sam9x60-pll: add support for parent_hw clk: at91: clk-utmi: add support for parent_hw clk: at91: clk-system: add support for parent_hw clk: at91: clk-programmable: add support for parent_hw clk: at91: clk-peripheral: add support for parent_hw clk: at91: clk-master: add support for parent_hw clk: at91: clk-generated: add support for parent_hw clk: at91: clk-main: add support for parent_data/parent_hw
2023-06-26Merge branch '20230608125315.11454-2-srinivas.kandagatla@linaro.org' into ↵Bjorn Andersson1-0/+17
clk-for-6.5 Merge the missing SC8280XP LPASS DeviceTree changes, which where brought in through a topic branch in order to be shared with the DeviceTree source files, but not merged into the clock tree until now.
2023-06-26Merge branches 'clk-imx', 'clk-microchip', 'clk-cleanup', 'clk-bindings', ↵Stephen Boyd2-5/+5
'clk-ti' and 'clk-kasprintf' into clk-next - Handle allocation failures from kasprintf() and friends * clk-imx: clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe() clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probe dt-bindings: clock: imx8m: Add missing interrupt property clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probe clk: imx: composite-8m: Add imx8m_divider_determine_rate clk: imx: scu: use _safe list iterator to avoid a use after free clk: imx: drop imx_unregister_clocks clk: imx6ul: retain early UART clocks during kernel init clk: imx: imx6sx: Remove CLK_SET_RATE_PARENT from the LDB clocks * clk-microchip: dt-bindings: clocks: at91sam9x5-sckc: convert to yaml dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml clk: microchip: Use of_property_read_bool() for boolean properties clk: microchip: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE * clk-cleanup: clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro clk: Fix memory leak in devm_clk_notifier_register() clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes clk: mvebu: Use of_get_cpu_hwid() to read CPU ID MAINTAINERS: Add Marvell mvebu clock drivers clk: mvebu: Use of_address_to_resource() clk: tegra: tegra124-emc: Fix potential memory leak clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider() clk: bcm: rpi: Fix off by one in raspberrypi_discover_clocks() clk: sifive: Use devm_platform_ioremap_resource() * clk-bindings: dt-bindings: clock: drop unneeded quotes and use absolute /schemas path dt-bindings: rcc: stm32: Sync with u-boot copy for STM32MP13 SoC * clk-ti: clk: keystone: syscon-clk: Add support for audio refclk dt-bindings: clock: Add binding documentation for TI Audio REFCLK dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible clk: keystone: syscon-clk: Allow the clock node to not be of type syscon * clk-kasprintf: clk: clocking-wizard: check return value of devm_kasprintf() clk: ti: clkctrl: check return value of kasprintf() clk: keystone: sci-clk: check return value of kasprintf() clk: si5341: free unused memory on probe failure clk: si5341: check return value of {devm_}kasprintf() clk: si5341: return error if one synth clock registration fails clk: cdce925: check return value of kasprintf() clk: vc5: check memory returned by kasprintf()
2023-06-26Merge branches 'clk-renesas', 'clk-determine-rate', 'clk-allwinner', ↵Stephen Boyd2-0/+135
'clk-samsung' and 'clk-amlogic' into clk-next - Make clk_ops::determine_rate mandatory for muxes * clk-renesas: clk: renesas: rzg2l: Convert to readl_poll_timeout_atomic() clk: renesas: mstp: Convert to readl_poll_timeout_atomic() clk: renesas: cpg-mssr: Convert to readl_poll_timeout_atomic() iopoll: Do not use timekeeping in read_poll_timeout_atomic() iopoll: Call cpu_relax() in busy loops clk: renesas: rzg2l: Fix CPG_SIPLL5_CLK1 register write clk: renesas: r8a779a0: Add PWM clock * clk-determine-rate: (71 commits) clk: sprd: composite: Simplify determine_rate implementation ASoC: tlv320aic32x4: pll: Remove impossible condition in clk_aic32x4_pll_determine_rate() clk: Fix best_parent_rate after moving code into a separate function clk: Forbid to register a mux without determine_rate ASoC: tlv320aic32x4: div: Switch to determine_rate ASoC: tlv320aic32x4: pll: Switch to determine_rate clk: tegra: super: Switch to determine_rate clk: tegra: periph: Switch to determine_rate clk: stm32: composite: Switch to determine_rate clk: st: flexgen: Switch to determine_rate clk: sprd: composite: Switch to determine_rate clk: ingenic: tcu: Switch to determine_rate clk: ingenic: cgu: Switch to determine_rate clk: imx: scu: Switch to determine_rate clk: da8xx: clk48: Switch to determine_rate clk: si5351: clkout: Switch to determine_rate clk: si5351: msynth: Switch to determine_rate clk: si5351: pll: Switch to determine_rate clk: si5341: Switch to determine_rate clk: cdce706: clkout: Switch to determine_rate ... * clk-allwinner: clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux * clk-samsung: clk: samsung: add CONFIG_OF dependency clk: samsung: Re-add support for Exynos4212 CPU clock clk: samsung: Add Exynos4212 compatible to CLKOUT driver dt-bindings: clock: samsung,exynos: add Exynos4212 clock compatible * clk-amlogic: MAINTAINERS: repair pattern in ARM/Amlogic Meson SoC CLOCK FRAMEWORK clk: meson: pll: remove unneeded semicolon clk: meson: a1: Staticize rtc clk clk: meson: a1: add Amlogic A1 Peripherals clock controller driver clk: meson: a1: add Amlogic A1 PLL clock controller driver clk: meson: introduce new pll power-on sequence for A1 SoC family clk: meson: make pll rst bit as optional dt-bindings: clock: meson: add A1 Peripherals clock controller bindings dt-bindings: clock: meson: add A1 PLL clock controller bindings
2023-06-21Merge tag 'qcom-drivers-for-6.5-2' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for v6.5 The detection of split/non-split firmware files in the MDT loader is corrected. The Geni driver is updated to not enable unused interrupts, in some configurations. The count unit for MSM8998 in BWMON is corrected. RPM master stats driver is corrected to check for the right return value of devm_ioremap(). Support for socinfo version 18 and 19 are aded, and IPQ5300 is added to the list of platforms. * tag 'qcom-drivers-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer dt-bindings: sram: qcom,imem: document qdu1000 soc: qcom: icc-bwmon: Fix MSM8998 count unit dt-bindings: soc: qcom,rpmh-rsc: Require power-domains soc: qcom: socinfo: Add Soc ID for IPQ5300 dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300 soc: qcom: Fix a IS_ERR() vs NULL bug in probe soc: qcom: socinfo: Add support for new fields in revision 19 soc: qcom: socinfo: Add support for new fields in revision 18 dt-bindings: firmware: scm: Add compatible for SDX75 soc: qcom: mdt_loader: Fix split image detection Link: https://lore.kernel.org/r/20230615163104.1461905-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21Merge tag 'qcom-drivers-for-6.5' of ↵Arnd Bergmann1-0/+10
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.5 Konrad Dybcio is promoted, from reviewer, to co-maintainer. The mdt_loader gets a fix to the detection of split binaries, where the previous logic sometimes concluded that the first segments was not split, in a split image. The unconditional calling of scm_pas_mem_setup() turns out to cause a regression and is reverted. The altmode subfunction of pmic_glink is enabled for SM8450. A new driver for exposing power statistics from the RPM, for debugging purposes, is introduced. OCMEM gets a debug prints of the hardware version, QMI helpers are transitioned to alloc_ordered_workqueue() and an error message in ramp_controller is improved. An API is introduced to the SMEM driver to allow other drivers to query the SoC id, rather than open-coding the parsing of the relevant SMEM item. This is then used to clean up the Qualcomm NVMEM-based cpufreq driver. Socinfo is extended with knowledge about IPQ5018, IPQ5312 and IPQ5302. * tag 'qcom-drivers-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits) soc: qcom: ocmem: Add OCMEM hardware version print cpufreq: qcom-nvmem: use helper to get SMEM SoC ID cpufreq: qcom-nvmem: use SoC ID-s from bindings soc: qcom: smem: introduce qcom_smem_get_soc_id() soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL() soc: qcom: socinfo: move SMEM item struct and defines to a header soc: qcom: mdt_loader: Fix unconditional call to scm_pas_mem_setup MAINTAINERS: Add Konrad Dybcio as linux-arm-msm co-maintainer dt-bindings: sram: qcom,imem: Document MSM8226 soc: qcom: socinfo: Add Soc ID for IPQ5312 and IPQ5302 dt-bindings: arm: qcom,ids: add SoC ID for IPQ5312 and IPQ5302 soc: qcom: socinfo: Add IDs for IPQ5018 family dt-bindings: arm: qcom,ids: Add IDs for IPQ5018 family soc: qcom: Introduce RPM master stats driver dt-bindings: soc: qcom: Add RPM Master stats soc: qcom: qmi: Use alloc_ordered_workqueue() to create ordered workqueues soc: qcom: ramp_controller: Improve error message for failure in .remove() dt-bindings: soc: qcom: smd-rpm: allow MSM8226 over SMD soc: qcom: rpmpd: use correct __le32 type dt-bindings: soc: qcom: eud: Fix compatible string in the example ... Link: https://lore.kernel.org/r/20230611010044.2481875-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21Merge tag 'icc-6.5-rc1' of ↵Greg Kroah-Hartman1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 6.5 This pull request contains the interconnect changes for the 6.5-rc1 merge window which is a mix of core and driver changes with the following highlights: - Support for configuring QoS on the Qualcomm's RPM-based platforms, that required special handling of some interface (non-scaling) clocks. - Support for clock-based interconnect providers for cases when clock corresponds to bus bandwidth. This is used to enable CPU cluster bandwidth scaling on MSM8996 platforms. One patch is touching a file in the clock subsystem that has been acked by the maintainer. Core changes: interconnect: add clk-based icc provider support interconnect: icc-clk: fix modular build interconnect: drop unused icc_get() interface Driver changes: interconnect: qcom: rpm: Rename icc desc clocks to bus_blocks interconnect: qcom: rpm: Rename icc provider num_clocks to num_bus_clocks interconnect: qcom: rpm: Drop unused parameters interconnect: qcom: rpm: Set QoS registers only once interconnect: qcom: rpm: Handle interface clocks interconnect: qcom: icc-rpm: Enforce 2 or 0 bus clocks interconnect: qcom: rpm: Don't use clk_get_optional for bus clocks anymore interconnect: qcom: msm8996: Promote to core_initcall interconnect: qcom: rpm: allocate enough data in probe() dt-bindings: interconnect/msm8996-cbf: add defines to be used by CBF clk: qcom: cbf-msm8996: scale CBF clock according to the CPUfreq dt-bindings: interconnect: fsl,imx8m-noc: drop unneeded quotes Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: dt-bindings: interconnect: fsl,imx8m-noc: drop unneeded quotes interconnect: icc-clk: fix modular build clk: qcom: cbf-msm8996: scale CBF clock according to the CPUfreq interconnect: drop unused icc_get() interface interconnect: qcom: rpm: allocate enough data in probe() interconnect: qcom: msm8996: Promote to core_initcall interconnect: qcom: rpm: Don't use clk_get_optional for bus clocks anymore interconnect: qcom: icc-rpm: Enforce 2 or 0 bus clocks interconnect: qcom: rpm: Handle interface clocks interconnect: add clk-based icc provider support dt-bindings: interconnect/msm8996-cbf: add defines to be used by CBF interconnect: qcom: rpm: Set QoS registers only once interconnect: qcom: rpm: Drop unused parameters interconnect: qcom: rpm: Rename icc provider num_clocks to num_bus_clocks interconnect: qcom: rpm: Rename icc desc clocks to bus_blocks
2023-06-20Merge tag 'qcom-arm64-for-6.5-2' of ↵Arnd Bergmann4-0/+215
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm ARM64 DTS changes for v6.5 This introduces support for the Qualcomm SDX75 platform, with the IDP reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the RDP454 is introduced. On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added. For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added to the CPU cluster power-domain to flush sleep & wake votes as the cluster goes down. On IPQ5332 additional reserved-memory regions to improve post mortem debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the RDP474 is added. On IPQ8074 critical thermal trip points are defined. As with IPQ5332 additional reserved-memory regions are used to improve post mortem debugging. Thermal sensors (tsens) are added and zones defined. The crypto engine is added, and support for the RDP454 board is added. Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and the purpose of msm8939-pm8916 is documented. MSM8939 has regulator definitions cleaned up, following to the previous effort on MSM8916. CPU Bus Fabric scaling support is added to MSM8996 Pro. On QCM2290 CPU idle states are added. For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC support. IMEM and PIL information regions are defined for improved post mortem debugging. The Qualcomm Robotics RB2 kit gets its on-board buttons described. A few fixes are introduced for the newly merged SC8180X, in particluar the DisplayPort blocks are moved to the MMCX power domain to avoid power being reduced prematurely during boot. The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s, and resets for the soundwire controllers are added. The OUI is specified for ethernet phys on SA8540P Ride platform, to avoid reset issues. Charger description is added to the PMI8998 PMIC and enabled across OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1. On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU clock controller and IOMMU definitions. The Fairphone FP4 gains Bluetooth support. SM8150 is transitioned to use 2 interconnect-cells, and the USB interconnect path is described to ensure buses are adequately voted for. The same changes are done for SM8250, and the resolution of the static framebuffer on Sony Xperia 1 II and 5 II are corrected. The USB bus paths are also added to SM8350, SM8450 and SM8550. On SM8550 DisplayPort nodes are added, as is the PWM controller for driving the notification LED and the RTC is enabled. For the MTP and QRD boards, the soundcard and audio codecs are defined. A Tegra change, related to LP855X binding changes, was accidentally picked up and dropped again later. A number of DeviceTree fixes identified through validation was introduced as well. Additionally a few nodes got their default status changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu node). * tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits) Revert "arm64: dts: adapt to LP855X bindings changes" arm64: dts: qcom: sc8280xp: Enable GPU related nodes arm64: dts: qcom: sc8280xp: Add GPU related nodes arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators arm64: dts: qcom: msm8939: Define regulator constraints next to usage arm64: dts: qcom: msm8939-pm8916: Clarify purpose arm64: dts: qcom: msm8939: Fix regulator constraints arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6 arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages arm64: dts: qcom: msm8939: Disable lpass_codec by default arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl arm64: dts: qcom: msm8996: rename labels for HDMI nodes arm64: dts: qcom: sm8250: rename labels for DSI nodes ... Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'qcom-arm64-for-6.5' of ↵Arnd Bergmann5-14/+178
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DeviceTree updates for v6.5 This introduces the RDP442 and RDP433 reference devices on IPQ5332 and IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574 are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is added. Support for Acer Apire 1, built on the Snapdragon 7c platform is introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating support for SC8180X and the Lenovo Flex 5G, and the Primus reference device, has been added. On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described above the RDP442 board on the prior. Download mode support and various reserved-memory regions are also introduced on IPQ6018. IPQ8074 gains another SPI controller. On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog, qfprom, SMEM and RPM are introduced. As are support for four new board, mentioned above. MSM8916 gains a range of structural improvements, to better suite the various boards supported. Regulator constraints are corrected and their states are adjusted to match reality (e.g. always-on regulators marked as always-on). BQ Aquaris X5 gains support for front flash LED. As mentioned above, MSM8939 support is introduced with support for boards from Sony and Square. MSM8953 gains DMA support in I2C masters. MSM8996-based Sony Xperia boards gains description of their RGB notification LED. On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU, AOSS, watchdog and missing low-speed controllers are added. On the Ride platform UFS, USB and an i2c bus are enabled. iommu properties are added to QSPI on both SC7180 and SC7280. LPASS clocks are adjusted and MDP node cleaned up slightly, on SC7180. As mentioned above, support for Acer Aspire 1 is introduced. Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the Primus reference device has been merged. On SC8280XP ethernet is added and enabled on the automotive ride platform. An SDC controller is introduced and enabled on the SC8280XP CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB SuperSpeed phy is added to the Type-C graph, to enable support for orientation switching. Fairphone 3 gains support for its notification LED. On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains support for flash LED and the RB3 (DB845c) board gains support for bonded/dual DSI-mode, to allow 4k output. On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY are introduced. As mentioned above Fxtec Pro1X is introduced. On the QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display, CAN-bus and GPIO LEDs are introduced, fixed regulators are described and the SD-card description is corrected. Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5 gains SD-card support, camera regulators and GPIO line names sorted out. SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5 II gains support for hardware video accelerator. Crypto engine is introduced for SM8350 as well. The HDK gets the USB Type-C graph described for Superspeed orientation switching and DisplayPort output. On SM8450 video clock controller and crypto engine are added, missing opp levels are introduced and the USB Type-C graph is defined for orientation switching and altmode. SM8550 gains GPU and video clock controllers and missing opp levels are added. The WCD9385 audio codec is added for the SM8550 MTP and on the QRD PCIe, USB, audio display and flash LED are added. * tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits) arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G arm64: dts: qcom: sc8180x: Introduce Primus arm64: dts: qcom: sc8180x: Add pmics arm64: dts: qcom: sc8180x: Add display and gpu nodes arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes arm64: dts: qcom: sc8180x: Add PCIe instances arm64: dts: qcom: sc8180x: Add QUPs arm64: dts: qcom: sc8180x: Add thermal zones arm64: dts: qcom: sc8180x: Add interconnects and lmh arm64: dts: qcom: Introduce the SC8180x platform arm64: dts: qcom: msm8916: Move aliases to boards arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec arm64: dts: qcom: msm8916/39: Clean up MDSS labels arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm arm64: dts: qcom: qrb4210-rb2: Enable USB node arm64: dts: qcom: sm6115: Add USB SS qmp phy node arm64: dts: qcom: ipq5332: add support for the RDP442 variant dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family ... Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'tegra-for-6.5-arm64-dt' of ↵Arnd Bergmann1-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.5-rc1 This introduces support for the IGX Orin and Jetson Orin Nano devices and enables various additional features on the Jetson AGX Orin and Jetson Orin NX. This also enables some basic thermal support to prevent the devices from overheating. Support for the GPU on the Google Pixel C is enabled and various minor issues are fixed and cleaned up. * tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable thermal support on Jetson Orin Nano arm64: tegra: Enable thermal support on Jetson Orin NX arm64: tegra: Enable thermal support on Jetson AGX Orin arm64: tegra: Add Tegra234 thermal support arm64: tegra: Add a few blank lines for better readability arm64: tegra: Sort properties more logically arm64: tegra: Enable GPU on Smaug arm64: tegra: Add GPU power rail regulator on Smaug arm64: tegra: Update USB phy-name for Jetson Orin NX arm64: tegra: Enable USB device for Jetson AGX Orin arm64: tegra: Add Tegra234 pin controllers arm64: tegra: Support Jetson Orin Nano Developer Kit arm64: tegra: Add missing cache properties on Tegra210 arm64: tegra: Fix PCIe regulator for Orin Jetson AGX arm64: tegra: Add CPU OPP tables and interconnects property arm64: tegra: Add support for IGX Orin Link: https://lore.kernel.org/r/20230609193620.2275240-6-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'stm32-mp25-for-v6.5-1' of ↵Arnd Bergmann1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/newsoc STM32 STM32MP25 for v6.5, round 1 Highlights: ---------- STM32MP25 family is composed of 4 SoCs defined as following: -STM32MP251: common part composed of 1*Cortex-A35, common peripherals like SDMMC, UART, SPI, I2C, PCIe, USB3, parallel and DSI display, 1*ETH ... -STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD and LVDS display. -STM32MP255: STM32MP253 + GPU/AI and video encode/decode. -STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports). A second diversity layer exists for security features/A35 frequency: -STM32MP25xY, "Y" gives information: -Y = A means A35@1.2GHz + no cryp IP and no secure boot. -Y = C means A35@1.2GHz + cryp IP and secure boot. -Y = D means A35@1.5GHz + no cryp IP and no secure boot. -Y = F means A35@1.5GHz + cryp IP and secure boot. This PR adds the STM32MP257F EV1 board support. This board embeds a STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports), 2*USB typeA, 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ... * tag 'stm32-mp25-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (44 commits) MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE arm64: defconfig: enable ARCH_STM32 and STM32 serial driver arm64: dts: st: add stm32mp257f-ev1 board support dt-bindings: stm32: document stm32mp257f-ev1 board arm64: dts: st: introduce stm32mp25 pinctrl files arm64: dts: st: introduce stm32mp25 SoCs family arm64: introduce STM32 family on Armv8 architecture dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon pinctrl: stm32: add stm32mp257 pinctrl support dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1 ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1 ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards ARM: dts: stm32: add vrefint support to adc2 on stm32mp15 ... Link: https://lore.kernel.org/r/080fc303-45c1-6cc0-4c5e-694e730896a6@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-15dt-bindings: mfd: stm32f7: Add binding definition for CAN3Dario Binacchi1-0/+1
Add binding definition for CAN3 peripheral. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230423172528.1398158-2-dario.binacchi@amarulasolutions.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-15dt-bindings: rcc: stm32: Sync with u-boot copy for STM32MP13 SoCPatrick Delaunay2-5/+5
Minor cosmetic change, aligned with files in U-Boot: - change obsolete SPDX id : GPL-2.0+ and use the same license GPL-2.0-only for the 2 files - use correct mail address gabriel.fernandez@foss.st.com - remove extra space Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20230510184305.v2.1.I417093ddcea282be479f10a37147d1935a9050b7@changeid Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-14Merge branch '20230526161129.1454-2-quic_anusha@quicinc.com' into clk-for-6.5Bjorn Andersson2-0/+5
Merge the DeviceTree binding updates for IPQ9574 GCC adding clocks and resets related to Crypto Engine, through a topic branch in order to make them available in the DeviceTree source tree as well.
2023-06-14Merge branch '20230526161129.1454-2-quic_anusha@quicinc.com' into arm64-for-6.5Bjorn Andersson2-0/+5
Merge IPQ9574 Crypto Engine-related DeviceTree bindings, to gain the additional clock defines needed to add the related nodes.
2023-06-14dt-bindings: clock: Add crypto clock and reset definitionsAnusha Rao2-0/+5
Add crypto clock and reset ID definitions for ipq9574. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230526161129.1454-2-quic_anusha@quicinc.com
2023-06-14dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300Kathiravan T1-0/+1
Add the SoC ID for IPQ5300, which belong to the family of IPQ5332 SoC. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230605080531.3879-2-quic_kathirav@quicinc.com
2023-06-13Merge branch '20230608125315.11454-2-srinivas.kandagatla@linaro.org' into ↵Bjorn Andersson1-0/+17
arm64-for-6.5 Merge the SC8280XP LPASSCC DeviceTree bindings in order to get access to the newly added reset defines.
2023-06-13dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XPSrinivas Kandagatla1-0/+5
The LPASS (Low Power Audio Subsystem) Audio clock controller provides reset support when it is under the control of Q6DSP. Add support for those resets and adds IDs for clients to request the reset. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230608125315.11454-3-srinivas.kandagatla@linaro.org
2023-06-13dt-bindings: clock: Add LPASSCC and reset controller for SC8280XPSrinivas Kandagatla1-0/+12
The LPASS (Low Power Audio Subsystem) clock controller provides reset support when it is under the control of Q6DSP. Add support for those resets and adds IDs for clients to request the reset. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230608125315.11454-2-srinivas.kandagatla@linaro.org
2023-06-13Merge branch '20230512122347.1219-3-quic_tdas@quicinc.com' into arm64-for-6.5Bjorn Andersson1-0/+193
Merge the SDX75 GCC DeviceTree binding, in order to get access to the clock defines in the DeviceTree source.
2023-06-13dt-bindings: reset: mt8188: add thermal reset control bitRunyang Chen1-0/+5
To support reset of infra_ao, add the index of infra_ao reset of thermal for MT8188. Signed-off-by: Runyang Chen <runyang.chen@mediatek.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230525075011.7032-2-runyang.chen@mediatek.com Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-09arm64: tegra: Add Tegra234 thermal supportThierry Reding1-0/+19
Add device tree node for the BPMP thermal node on Tegra234 and add thermal zone definitions. Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-06-09dt-bindings: pinctrl: Drop k3Nishanth Menon1-60/+0
For convenience (less code duplication), the pin controller pin configuration register values were defined in the bindings header. These are not some IDs or other abstraction layer but raw numbers used in the registers. These constants do not fit the purpose of bindings. They do not provide any abstraction, any hardware and driver independent ID. In fact, the Linux pinctrl-single driver actually do not use the bindings header at all. Commit f2de003e1426 ("dt-bindings: pinctrl: k3: Deprecate header with register constants") already moved users to the local header, so, drop the binding header. See background discussion in [1]. While at it, clean up the MAINTAINERS file which is the only reference left. [1]: https://lore.kernel.org/linux-arm-kernel/71c7feff-4189-f12f-7353-bce41a61119d@linaro.org/ Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230601173831.982429-1-nm@ti.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-08dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packagesAlexandre Torgue1-0/+3
Add support for st,stm32mp257-pinctrl and st,stm32mp257-z-pinctrl. Add packages AI, AK and AL (values : 0x100, 0x400 and 0x800) Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-06dt-bindings: gpio: Remove FSI domain ports on Tegra234Prathamesh Shete1-12/+8
Ports S, T, U and V are in a separate controller that is part of the FSI domain. Remove their definitions from the MAIN controller definitions to get rid of the confusion. This technically breaks ABI compatibility with old device trees. However it doesn't cause issues in practice. The GPIO pins impacted by this are used for non-critical functionality. Fixes: a8b10f3d12cfc ("dt-bindings: gpio: Add Tegra234 support") Signed-off-by: Prathamesh Shete <pshete@nvidia.com> [treding@nvidia.com: rewrite commit message] Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-06-05dt-bindings: reset: nuvoton: Document ma35d1 reset controlJacky Huang1-0/+108
Add the dt-bindings header for Nuvoton ma35d1, that gets shared between the reset controller and reset references in the dts. Add documentation to describe nuvoton ma35d1 reset driver. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05dt-bindings: clock: nuvoton: add binding for ma35d1 clock controllerJacky Huang1-0/+253
Add the dt-bindings header for Nuvoton ma35d1, that gets shared between the clock controller and clock references in the dts. Add documentation to describe nuvoton ma35d1 clock driver. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-01dt-bindings: ti-serdes-mux: Add defines for J784S4 SoCMatt Ranostay1-0/+62
There are 4 lanes in the single instance of J784S4 SERDES. Each SERDES lane mux can select up to 4 different IPs. Define all the possible functions. Signed-off-by: Matt Ranostay <mranostay@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/755a14f1-92ad-ce4b-3fde-2a4b0650475c@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30dt-bindings: clock: meson: add A1 Peripherals clock controller bindingsDmitry Rokosov1-0/+115
Add documentation and dt bindings for the Amlogic A1 Peripherals clock controller. A1 PLL clock controller has references to A1 Peripherals clock controller objects, so reflect them in the schema. Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230523135351.19133-6-ddrokosov@sberdevices.ru Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-05-30dt-bindings: clock: meson: add A1 PLL clock controller bindingsDmitry Rokosov1-0/+20
Add the documentation and dt bindings for Amlogic A1 PLL clock controller. Also include new A1 clock controller dt bindings to MAINTAINERS. Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230523135351.19133-4-ddrokosov@sberdevices.ru Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-05-27Merge branch 'sm8450-sm8550-gpucc-binding' into arm64-for-6.5Bjorn Andersson3-0/+116
Introduce DeviceTree bindings for SM8450 and SM8550 GPU clock controller, to introduce the constants necessary to referr to these clocks.
2023-05-27Merge branch 'sm8450-sm8550-gpucc-binding' into clk-for-6.5Bjorn Andersson3-0/+116
Bring GPUCC DeviceTree bindings for SM8450 and SM8550 in through a topic branch to allow sharing it with the DeviceTree source tree as well.
2023-05-27dt-bindings: clock: qcom: Add SM8550 graphics clock controllerJagadeesh Kona1-0/+48
Add device tree bindings for the graphics clock controller on Qualcomm SM8550 platform. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230524181800.28717-2-quic_jkona@quicinc.com
2023-05-27dt-bindings: clock: Add Qcom SM8450 GPUCCKonrad Dybcio2-0/+68
Add device tree bindings for the graphics clock controller on Qualcomm Technology Inc's SM8450 SoCs. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230517-topic-waipio-gpucc-v1-1-4f40e282af1d@linaro.org
2023-05-25dt-bindings: leds-lp55xx: Add ti,charge-pump-modeMaarten Zanders1-0/+10
Add a binding to configure the internal charge pump for lp55xx. Signed-off-by: Maarten Zanders <maarten.zanders@mind.be> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230421075305.37597-2-maarten.zanders@mind.be
2023-05-25Merge branch '20230524140656.7076-2-quic_tdas@quicinc.com' into HEADBjorn Andersson1-0/+38
Merge the SM8450 Video Clock Controller DeviceTree binding topic branch in order to get access to the clock constants defined by the binding.
2023-05-25Merge branch '20230512122347.1219-3-quic_tdas@quicinc.com' into clk-for-6.5Bjorn Andersson1-0/+193
Merge SDX75 Global Clock Controller DeviceTree binding through a topic branch, to allow inclusion in DeviceTree source as well.
2023-05-25Merge branch '20230524140656.7076-2-quic_tdas@quicinc.com' into HEADBjorn Andersson1-0/+38
Merge the SM8450 Video Clock Controller DeviceTree binding through a topic branch, in order to be able to use the introduced constants in changes on DeviceTree source branch as well.
2023-05-25dt-bindings: clock: Add SM8350 VIDEOCCKonrad Dybcio2-0/+53
SM8350, like most recent higher-end chips has a separate clock controller block just for the Venus IP. Document it. The binding was separated as the driver, unlike the earlier ones, doesn't expect clock-names to keep it easier to maintain. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230413-topic-lahaina_vidcc-v4-1-86c714a66a81@linaro.org
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-09 01:18:40 +0300