summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)AuthorFilesLines
2014-10-15Merge tag 'mfd-for-linus-3.18' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - DT clean-ups in da9055-core, max14577, rn5t618, arizona, hi6421, stmpe, twl4030 - Export symbols for use in modules in max14577 - Plenty of static code analysis/Coccinelle fixes throughout the SS - Regmap clean-ups in arizona, wm5102, wm5110, da9052, tps65217, rk808 - Remove unused/duplicate code in da9052, 88pm860x, ti_ssp, lpc_sch, arizona - Bug fixes in ti_am335x_tscadc, da9052, ti_am335x_tscadc, rtsx_pcr - IRQ fixups in arizona, stmpe, max14577 - Regulator related changes in axp20x - Pass DMA coherency information from parent => child in MFD core - Rename DT document files for consistency - Add ACPI support to the MFD core - Add Andreas Werner to MAINTAINERS for MEN F21BMC New drivers/supported devices: - New driver for MEN 14F021P00 Board Management Controller - New driver for Ricoh RN5T618 PMIC - New driver for Rockchip RK808 - New driver for HiSilicon Hi6421 PMIC - New driver for Qualcomm SPMI PMICs - Add support for Intel Braswell in lpc_ich - Add support for Intel 9 Series PCH in lpc_ich - Add support for Intel Quark ILB in lpc_sch" [ Delayed to after the poweer/reset pull due to Kconfig problems with recursive Kconfig select/depends-on chains. - Linus ] * tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) mfd: cros_ec: wait for completion of commands that return IN_PROGRESS i2c: i2c-cros-ec-tunnel: Set retries to 3 mfd: cros_ec: move locking into cros_ec_cmd_xfer mfd: cros_ec: stop calling ->cmd_xfer() directly mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC mfd: arizona: Correct mask to allow setting micbias external cap mfd: Add ACPI support Revert "mfd: wm5102: Manually apply register patch" mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS mfd: dt-bindings: atmel-gpbr: Rename doc file to conform to naming convention mfd: dt-bindings: qcom-pm8xxx: Rename doc file to conform to naming convention mfd: Inherit coherent_dma_mask from parent device mfd: Document DT bindings for Qualcomm SPMI PMICs mfd: Add support for Qualcomm SPMI PMICs mfd: dt-bindings: pm8xxx: Add new compatible string mfd: axp209x: Drop the parent supplies field mfd: twl4030-power: Use 'ti,system-power-controller' as alternative way to support system power off mfd: dt-bindings: twl4030-power: Use the standard property to mark power control mfd: syscon: Add Atmel GPBR DT bindings documention ...
2014-10-11Merge tag 'sound-3.18-rc1' of ↵Linus Torvalds1-0/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This time it's a relatively calm update batch, but the amount isn't too small in the end. Here we go over some highlights: ALSA core: - One major change is the support of nonatomic PCM operations. This allows the trigger and other callbacks to call schedule(), which would be useful for mailbox type communications. Already some drivers (Digigram ones) have been converted to use together with threaded irqs as an example. - Improvement / fixes of DSD PCM format support HD-audio: - Large volume of rewrites are found in Realtek codec driver for converting Dell and HP quirks to generic forms. - Inverted dmic code cleanup from David. - Realtek COEF access has been optimized. - Now HD-audio jack infrastructure allows multiple callbacks, which fixes / simplifies the jack-dependent power controls on STAC/IDT and VIA codecs. - Many additional device-specific fixups as usual - A few deadcode cleanups, CA0132 code cleanup, etc. ASoC: - More componentization work from Lars-Peter, this time mainly cleaning up the suspend and bias level transition callbacks. - Real system support for the Intel drivers and a bunch of fixes and enhancements for the associated CODEC drivers, this is going to need a lot quirks over time due to the lack of any firmware description of the boards. - Jack detect support for simple card from Dylan Reid. - A bunch of small fixes and enhancements for the Freescale drivers. - New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32, Everest Semiconductor ES8328 and Freescale cards using the ASRC in newer i.MX processors. - A few simple-card fixes, mostly cleanups but also a fix for interaction between GPIO 0 and simple-card. Misc: - Virtuoso / Oxygen updates by Clemens - USB-audio: Yamaha MOTIF XF MIDI port name fixes - Conversion of kernel messages to standard dev_*() in ctxfi driver" * tag 'sound-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (251 commits) ASoC: mc13783: Ensure we only try to dereference valid of_nodes ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_txctrl ALSA: hda - Add dock port support to Thinkpad L440 (71aa:501e) ALSA: Allow pass NULL dev for snd_pci_quirk_lookup() ASoC: imx-es8328: Fix of_node_put() call with uninitialized object ASoC: soc-pcm: fix sig_bits determination in soc_pcm_apply_msb() ASoC: simple-card: Initialize headphone and mic GPIO numbers ASoC: imx-es8328: Fix missing return code in imx_es8328_probe() ALSA: hda - Add dock support for Thinkpad T440 (17aa:2212) ALSA: usb: caiaq: check for cdev->n_streams > 1 ASoC: 88pm860x-codec: Fix possibly missing string termination ASoC: core: fix use after free in snd_soc_remove_platform() ASoC: soc-dapm: fix use after free ALSA: hda - Make the inv dmic handling for Realtek use generic parser ALSA: hda - Add Inverted Internal mic for Samsung Ativ book 9 (NP900X3G) ALSA: hda - Add inverted internal mic for Asus Aspire 4830T ASoC: Intel: byt-rt5640: fix coccinelle warnings ASoC: fsl_esai doc: Add "fsl,vf610-esai" as compatible string ASoC: da732x: Remove unnecessary KERN_ERR in pr_err() ASoC: simple-card: Fix detect gpio documentation. ...
2014-10-09Merge tag 'dt-for-linus' of ↵Linus Torvalds3-0/+82
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Arnd Bergmann: "As usual, this is the largest branch, though this time a little under half of the total changes with 307 individual non-merge changesets. The largest changes are the addition of new machines, in particular the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support for the old i.MX1 platform. Other changes include - at91: various sam9 and sama5 updates - exynos: much extended Peach Pi/Pit (Chromebook 2) support - keystone: new peripherals - meson: added DT for meson6 SoC - mvebu: new device support for Armada 370/375 - qcom: improved support for IPQ8064 and MSM8x60 - rockchip: much improved support for rk3288 - shmobile: lots of updates all over the place - sunxi: dts license change - sunxi: more a23 device support - vexpress: CLCD DT description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits) ARM: DTS: meson: update DTSI to add watchdog node ARM: dts: keystone-k2l: fix mdio io start address ARM: dts: keystone-k2e: fix mdio io start address ARM: dts: keystone-k2e: update usb1 node for dma properties ARM: dts: keystone: fix io range for usb_phy0 Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt" Revert "ARM: dts: hix5hd2: add wdg node" ARM: dts: add rk3288 i2s controller ARM: vexpress: Add CLCD Device Tree properties ARM: bcm2835: add I2S pinctrl to device tree ARM: meson: documentation: add bindings documentation ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS ARM: dts: mt6589: Change compatible string for GIC ARM: dts: mediatek: Add compatible property for aquaris5 ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk ARM: dts: mt6589: Fix typo in GIC unit address ARM: dts: Build dtb for Mediatek board ARM: dts: keystone: fix bindings for pcie and usb clock nodes ARM: dts: keystone: k2l: Fix chip selects for SPI devices ARM: dts: keystone: add dsp gpio controllers nodes ...
2014-10-09Merge tag 'soc-for-linus' of ↵Linus Torvalds5-6/+166
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support. Among the things new for this release are: - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3 - bcm: Added support for BCM63XX family of DSL SoCs - hisi: Added support for HiP04 server-class SoC - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC Noteworthy changes to existing SoC support are: - imx: convert i.MX1 to device tree - omap: lots of power management work - omap: base support to enable moving to standard UART driver - shmobile: lots of progress for multiplatform support, still ongoing" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits) ARM: hisi: depend on ARCH_MULTI_V7 CNS3xxx: Fix debug UART. ARM: at91: fix nommu build regression ARM: meson: add basic support for MesonX SoCs ARM: meson: debug: add debug UART for earlyprintk support irq: Export handle_fasteoi_irq ARM: mediatek: Add earlyprintk support for mt6589 ARM: hisi: Fix platmcpm compilation when ARMv6 is selected ARM: debug: fix alphanumerical order on debug uarts ARM: at91: document Atmel SMART compatibles ARM: at91: add sama5d4 support to sama5_defconfig ARM: at91: dt: add device tree file for SAMA5D4ek board ARM: at91: dt: add device tree file for SAMA5D4 SoC ARM: at91: SAMA5D4 SoC detection code and low level routines ARM: at91: introduce basic SAMA5D4 support clk: at91: add a driver for the h32mx clock ARM: pxa3xx: provide specific platform_devices for all ssp ports ARM: pxa: ssp: provide platform_device_id for PXA3xx ARM: OMAP4+: Remove static iotable mappings for SRAM ARM: OMAP4+: Move SRAM data to DT ...
2014-10-08Merge branch 'for-linus' of ↵Linus Torvalds1-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A few new haptic/button drivers, a rudimentary support for laptops using FocalTech touchpads; xpad driver will bind to more devices, and a few other driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - convert to platform bus Input: palmas-pwrbutton - fix typo in the license string Input: palmas-pwrbutton - use IRQF_ONESHOT Input: psmouse - add support for detecting FocalTech PS/2 touchpads Input: psmouse - add psmouse_matches_pnp_id helper function Input: joystick - use ktime for measuring timing Input: add haptic driver on max77693 Input: introduce palmas-pwrbutton Input: add support for the DRV2667 haptic driver Input: xpad - sync device IDs with xboxdrv Input: xpad - add VID/PID for Razer Sabertooth Input: cros_ec_keyb - optimize ghosting algorithm Input: drv260x - fix binding document Input: drv260x - add check for ERM mode and LRA Libraries Input: drv260x - remove unused defines Input: drv260x - add TI drv260x haptics driver
2014-09-26mfd: dt-bindings: Add RK808 device tree bindings documentChris Zhong1-0/+11
Add device tree bindings documentation and a header file for rockchip's RK808 pmic. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Zhang Qing <zhangqing@rock-chips.com> Tested-by: Heiko <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24Merge tag 'imx-dt-3.18' of ↵Olof Johansson4-6/+89
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree changes for 3.18" from Shawn Guo: The i.MX device tree changes for 3.18: - Device tree support for i.MX ADS and Armadeus APF9328 boards - Enable thermal sensor support for i.MX6SL - Add LCD support for i.MX6SL EVK board - Fix display duplicate name for a bunch of board dts files - Configure imx6qdl-sabresd board pins locally to remove the dependency on bootloader - A set of imx28-tx28 board dts updates from Lothar - Add pci config space as platform resource - Enable devices RTC, I2C and HDMI for nitrogen6x board - Split HummingBoard DT to support s/dl and d/q - mSATA and IR input support for HummingBoard - Add SSI baud clock for i.MX6 device trees - Add USB support for vf610-colibri and vf610-twr boards - A set of cleanup and updates on Gateworks boards * tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (86 commits) ARM: dts: imx6: make gpt per clock can be from OSC ARM: dts: imx: ventana: add canbus support for GW52xx ARM: dts: imx: ventana: cleanup pinctrl groups ARM: dts: imx: ventana: configure padconf for all pins ARM: dts: imx: ventana: use gpio constants ARM: dts: imx: ventana: remove unused aliases ARM: dts: imx: ventana: remove unsupported dt nodes ARM: dts: imx28-tx28: add alias for CAN XCVR regulator ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs ARM: dts: imx28-tx28: use GPIO flags ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev ARM: dts: imx6sl: add baud clock and clock-names for ssi ARM: dts: imx6qdl: add baud clock and clock-names for ssi ARM: dts: imx6qdl-sabresd: Configure the pins locally ARM: dts: imx28-m28evk: Fix display duplicate name warning ARM: dts: imx28-tx28: Fix display duplicate name warning ARM: dts: imx28-m28cu: Fix display duplicate name warning ARM: dts: imx28-cfa100: Fix display duplicate name warning ARM: dts: imx28-apf28dev: Fix display duplicate name warning ARM: dts: imx28-apx4devkit: Fix display duplicate name warning ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-24Merge tag 'imx-soc-3.18' of ↵Olof Johansson4-6/+89
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc Merge "ARM: imx: SoC updates for 3.18" from Shawn Guo: The i.MX SoC updates for 3.18: - Add initial devicetree support for i.MX1 - Support GPT per clock source from OSC for i.MX6 - A couple of parent selection corrections for i.MX6SL clock driver - Support more chip revision for i.MX6 - Convert pr_warning to pr_warn - Add exclusive gate clock support - Add BYPASS support for i.MX6 PLL clocks - Update i.MX6 clock tree for audio use case - A couple of VF610 clock driver updates * tag 'imx-soc-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits) ARM: imx_v6_v7_defconfig updates ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIM arm: mach-imx: Convert pr_warning to pr_warn ARM: imx: source gpt per clk from OSC for system timer ARM: imx: add gpt_3m clk for i.mx6qdl ARM: imx: fix register offset of pll7_usb_host gate clock ARM: clk-imx6sl: refine clock tree for SSI ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver ARM: imx6sx: add BYPASS support for PLL clocks ARM: imx6sl: add BYPASS support for PLL clocks ARM: imx6q: add BYPASS support for PLL clocks ARM: imx: add an exclusive gate clock type ARM: clk-imx6q: refine clock tree for SSI ARM: clk-imx6q: refine clock tree for ASRC ARM: clk-imx6sl: correct the pxp and epdc axi clock selections ARM: clk-imx6q: refine clock tree for ESAI ARM: clk-imx6sl: Select appropriate parents for LCDIF clocks ARM: clk-imx6sl: Remove csi_lcdif_sels[] ARM: imx: clk-vf610: Add USBPHY clocks ARM: imx: add cpufreq support for i.mx6sx ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-16ARM: imx: add gpt_3m clk for i.mx6qdlAnson Huang1-1/+2
Add gpt_3m clock for i.mx6qdl, as gpt can source clock from OSC, some i.MX6 series SOCs has fixed divider of 8 for gpt clock, so here add a fix clk of gpt_3m. i.MX6Q TO1.0 has no gpt_3m option, so force it to be from ipg_per. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: clk-imx6sl: refine clock tree for SSIShengjiu Wang1-1/+4
Each SSI has "ssi", "ssi_ipg" clocks, and they share same gate bits. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: imx6sx: add BYPASS support for PLL clocksShawn Guo1-1/+24
This is the same change for imx6sx clock driver as "ARM: imx6q: add BYPASS support for PLL clocks" for imx6q. The difference is that only anaclk1 is available on imx6sx. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: imx6sl: add BYPASS support for PLL clocksShawn Guo1-1/+26
This is the same change for imx6sl clock driver as "ARM: imx6q: add BYPASS support for PLL clocks" for imx6q. The difference is that only anaclk1 is available on imx6sl. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: imx6q: add BYPASS support for PLL clocksShawn Guo1-1/+26
The imx6q clock driver currently hard-codes all PLL clocks to source from OSC24M without BYPASS support. The patch adds the missing lvds_in clock which is mutually exclusive with lvds_gate, and implements BYPASS and BYPASS_CLK_SRC selection for PLL clocks as per Figure 10-3. Primary Clock Generation in IMX6DQRM, i.e. both BYPASS_CLK_SRC and BYPASS bits are implemented as mux clocks, and ENABLE bit of PLL clocks is implemented as a gate clock after BYPASS mux. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: clk-imx6q: refine clock tree for ASRCShengjiu Wang1-1/+3
ASRC has "asrc", "asrc_ipg", "asrc_mem" clocks, and they share the same gate bits. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: clk-imx6q: refine clock tree for ESAIShengjiu Wang1-3/+4
There are three clock for ESAI, esai_extal, esai_ipg, esai_mem. Rename 'esai' to 'esai_extal', 'esai_ahb' to 'esai_mem', and add 'esai_ipg'. Make the clock for ESAI more clear and align them with imx6sx. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: imx: clk-vf610: Add USBPHY clocksStefan Agner1-1/+4
This commit adds PLL7 which is required for USBPHY1. It also adds the USB PHY and USB Controller clocks and the gates to enable them. Acked-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-09ARM: shmobile: Initial r8a7794 SoC device treeUlrich Hecht1-0/+80
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> [uli: reduced to minimum, added cmt, enabled scif2, split off board part] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-09-05pinctrl: at91: add drive strength configurationMarek Roszko1-0/+5
The SAMA5 and SAM9x5 series both have drive strength options for the PIOs. This patch adds the ability to set one of three hardware options for drive strengths of low, medium or high for the each pin. The actual current output of the chip based on the setting is defined in the datasheets and varies per pins separate from banks and with supply voltage. This patch adds three new dt-bindings that allow setting the strength when configuring pins. By default, no change will be made to the drive strength of a pin from its reset value. Due to the difference between the register addresses of the SAMA5 and SAM9x5 series, a new sama5d3-pinctrl id was added. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04Merge tag 'v3.17-rc3' into nextDmitry Torokhov34-9/+2688
Sync with mainline to bring in Chrome EC changes.
2014-08-28pinctrl: Add mux options 3 and 4 for rockchip pinctrlDoug Anderson1-0/+2
Newer Rockchip SoCs have more muxing slots. Add slots 3 and 4 since the rk3288 table goes all the way up to 4. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-23ARM: shmobile: r8a7740: clock register bitsUlrich Hecht1-0/+77
Contains the header file with the clock pulse generator and MSTP bits. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-22ARM: shmobile: r8a7740: clock register bitsUlrich Hecht1-0/+77
Contains the header file with the clock pulse generator and MSTP bits. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-22ARM: shmobile: r8a7791: Add JPU clock dt and CPG define.Mikhail Ulyanov1-0/+1
Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-22ARM: shmobile: r8a7790: Add JPU clock dt and CPG define.Mikhail Ulyanov1-0/+1
Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-20Input: drv260x - add TI drv260x haptics driverDan Murphy1-0/+36
Add the TI drv260x haptics/vibrator driver. This device uses the input force feedback to produce a wave form to driver an ERM or LRA actuator device. The initial driver supports the devices real time playback mode. But the device has additional wave patterns in ROM. This functionality will be added in future patchsets. Product data sheet is located here: http://www.ti.com/product/drv2605 Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-17ASoC: cs35l32: Add support for CS35L32 Boosted AmplifierBrian Austin1-0/+26
This patch adds support for the Cirrus Logic CS35L32 Boosted Amplifier I2S output provides monitor data to the SOC/CODEC/DSP for speaker protection/enhancement algorithms Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-11Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-0/+20
Pull slave-dma updates from Vinod Koul: "Some notable changes are: - new driver for AMBA AXI NBPF by Guennadi - new driver for sun6i controller by Maxime - pl330 drivers fixes from Lar's - sh-dma updates and fixes from Laurent, Geert and Kuninori - Documentation updates from Geert - drivers fixes and updates spread over dw, edma, freescale, mpc512x etc.." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits) dmaengine: sun6i: depends on RESET_CONTROLLER dma: at_hdmac: fix invalid remaining bytes detection dmaengine: nbpfaxi: don't build this driver where it cannot be used dmaengine: nbpf_error_get_channel() can be static dma: pl08x: Use correct specifier for size_t values dmaengine: Remove the context argument to the prep_dma_cyclic operation dmaengine: nbpfaxi: convert to tasklet dmaengine: nbpfaxi: fix a theoretical race dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores dmaengine: add device tree binding documentation for the nbpfaxi driver dmaengine: edma: Do not register second device when booted with DT dmaengine: edma: Do not change the error code returned from edma_alloc_slot dmaengine: rcar-dmac: Add device tree bindings documentation dmaengine: shdma: Allocate cyclic sg list dynamically dmaengine: shdma: Make channel filter ignore unrelated devices dmaengine: sh: Rework Kconfig and Makefile dmaengine: sun6i: Fix memory leaks dmaengine: sun6i: Free the interrupt before killing the tasklet dmaengine: sun6i: Remove switch statement from buswidth convertion routine dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected ...
2014-08-08Merge tag 'dt-for-3.17' of ↵Linus Torvalds3-0/+61
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device-tree changes from Olof Johansson: "Unlike the board branch, this keeps having large sets of changes for every release, but that's quite expected and is so far working well. Most of this is plumbing for various device bindings and new platforms, but there's also a bit of cleanup and code removal for things that are moved from platform code to DT contents (some OMAP clock code in particular). There's also a pinctrl driver for tegra here (appropriately acked), that's introduced this way to make it more bisectable. I'm happy to say that there were no conflicts at all with this branch this release, which means that changes are flowing through our tree as expected instead of merged through driver maintainers (or at least not done with conflicts). There are several new boards added, and a couple of SoCs. In no particular order: - Rockchip RK3288 SoC support, including DTS for a dev board that they have seeded with some community developers. - Better support for Hardkernel Exynos4-based ODROID boards. - CCF conversions (and dtsi contents) for several Renesas platforms. - Gumstix Pepper (TI AM335x) board support - TI eval board support for AM437x - Allwinner A23 SoC, very similar to existing ones which mostly has resulted in DT changes for support. Also includes support for an Ippo tablet with the chipset. - Allwinner A31 Hummingbird board support, not to be confused with the SolidRun i.MX-based Hummingboard. - Tegra30 Apalis board support" * tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (334 commits) ARM: dts: Enable USB host0 (EHCI) on rk3288-evb ARM: dts: add rk3288 ehci usb devices ARM: dts: Turn on USB host vbus on rk3288-evb ARM: tegra: apalis t30: fix device tree compatible node ARM: tegra: paz00: Fix some indentation inconsistencies ARM: zynq: DT: Clarify Xilinx Zynq platform ARM: dts: rockchip: add watchdog node ARM: dts: rockchip: remove pinctrl setting from radxarock uart2 ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250 ARM: dts: Add TMU dt node to monitor the temperature for exynos3250 ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250 ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only ARM: dts: max77686 is exynos5250-snow only ARM: zynq: DT: Remove DMA from board DTs ARM: zynq: DT: Add CAN node ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table ARM: dts: Add PMU DT node for exynos5260 SoC ARM: EXYNOS: Add support for Exynos5410 PMU ARM: dts: Add PMU to exynos5410 ...
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds7-1/+728
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-08-08Merge tag 'mfd-for-linus-3.17' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD update from Lee Jones: "Changes to existing drivers: - checkpatch fixes throughout the subsystem - use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core - use DMA in rtsx_pcr - restrict building on unsupported architectures on timberdale, cs5535 - SPI hardening in cros_ec_spi - more robust error handing in asic3, cros_ec, ab8500-debugfs, max77686 and pcf50633-core - reorder PM runtime and regulator handing during shutdown in arizona - enable wakeup in cros_ec_spi - unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld, tps65912-spi, wm5110-tables and ab8500-debugfs - add regulator handing into suspend() in sec-core - remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel - use cross-architecture friendly data sizes in stmpe-i2c, arizona, max77686 and tps65910 - devicetree documentation updates throughout - provide power management support in max77686 - few OF clean-ups in max77686 - use manged resources in tps6105x New drivers/supported devices: - add support for s2mpu02 to sec-core - add support for Allwinner A32 to sun6i-prcm - add support for Maxim 77802 in max77686 - add support for DA9063 AD in da9063 - new driver for Intel PMICs (generic) and specifically Crystal Cove (Re-)moved drivers == - move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb" * tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits) MAINTAINERS: Update MFD repo location mfd: omap-usb-host: Fix improper mask use. mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it mfd: arizona: Add missing handling for ISRC3 under/overclocked mfd: wm5110: Add new interrupt register definitions mfd: arizona: Rename thermal shutdown interrupt mfd: wm5110: Add in the output done interrupts mfd: wm5110: Remove non-existant interrupts mfd: tps65912-spi: Remove unused variable mfd: htc-i2cpld: Remove unused code mfd: da9063: Add support for AD silicon variant mfd: arizona: Map MICVDD from extcon device to the Arizona core mfd: arizona: Add MICVDD to mapped regulators for wm8997 mfd: max77686: Ensure device type IDs are architecture agnostic mfd: max77686: Add Maxim 77802 PMIC support mfd: tps6105x: Use managed resources when allocating memory mfd: wm8997-tables: Suppress 'line over 80 chars' warnings mfd: kempld-core: Correct a variety of checkpatch warnings mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch mfd: si476x-cmd: Remedy checkpatch style complains ...
2014-08-05Merge tag 'usb-3.17-rc1' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB driver update for 3.17-rc1. Loads of gadget driver changes in here, including some big file movements to make things easier to manage over time. There's also the usual xhci and uas driver updates, and a handful of other changes in here. The changelog has the full details. All of these have been in linux-next for a while" * tag 'usb-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (211 commits) USB: devio: fix issue with log flooding uas: Log a warning when we cannot use uas because the hcd lacks streams uas: Only complain about missing sg if all other checks succeed xhci: Add missing checks for xhci_alloc_command failure xhci: Rename Asrock P67 pci product-id to EJ168 xhci: Blacklist using streams on the Etron EJ168 controller uas: Limit qdepth to 32 when connected over usb-2 uwb/whci: use correct structure type name in sizeof usb-core bInterval quirk USB: serial: ftdi_sio: Add support for new Xsens devices USB: serial: ftdi_sio: Annotate the current Xsens PID assignments usb: chipidea: debug: fix sparse non static symbol warnings usb: ci_hdrc_imx doc: fsl,usbphy is required usb: ci_hdrc_imx: Return -EINVAL for missing USB PHY usb: core: allow zero packet flag for interrupt urbs usb: lvstest: Fix sparse warnings generated by kbuild test bot USB: core: hcd-pci: free IRQ before disabling PCI device when shutting down phy: miphy365x: Represent each PHY channel as a DT subnode phy: miphy365x: Provide support for the MiPHY356x Generic PHY phy: miphy365x: Add Device Tree bindings for the MiPHY365x ...
2014-08-04Merge tag 'clk-for-linus-3.17' of ↵Linus Torvalds20-4/+1860
git://git.linaro.org/people/mike.turquette/linux Pull clock framework updates from Mike Turquette: "The clock framework changes for 3.17 are mostly additions of new clock drivers and fixes/enhancements to existing clock drivers. There are also some non-critical fixes and improvements to the framework core. Changes to the clock framework core include: - improvements to printks on errors - flattening the previously hierarchal structure of per-clock entries in debugfs - allow per-clock debugfs entries that are specific to a particular clock driver - configure initial clock parent and/or initial clock rate from Device Tree - several feature enhancements to the composite clock type - misc fixes New clock drivers added include: - TI Palmas PMIC - Allwinner A23 SoC - Qualcomm APQ8084 and IPQ8064 SoCs - Rockchip rk3188, rk3066 and rk3288 SoCs - STMicroelectronics STiH407 SoC - Cirrus Logic CLPS711X SoC Many fixes, feature enhancements and further clock tree support for existing clock drivers also were merged, such as Samsung's "ARMCLK down" power saving feature for their Exynos4 & Exynos5 SoCs" * tag 'clk-for-linus-3.17' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: Add missing of_clk_set_defaults export clk: checking wrong variable in __set_clk_parents() clk: Propagate any error return from debug_init() clk: clps711x: Add DT bindings documentation clk: Add CLPS711X clk driver clk: st: Use round to closest divider flag clk: st: Update frequency tables for fs660c32 and fs432c65 clk: st: STiH407: Support for clockgenA9 clk: st: STiH407: Support for clockgenD0/D2/D3 clk: st: STiH407: Support for clockgenC0 clk: st: Add quadfs reset handling clk: st: Add polarity bit indication clk: st: STiH407: Support for clockgenA0 clk: st: STiH407: Support for A9 MUX Clocks clk: st: STiH407: Support for Flexgen Clocks clk: st: Adds Flexgen clock binding clk: st: Remove uncessary (void *) cast clk: st: use static const for clkgen_pll_data tables clk: st: use static const for stm_fs tables clk: st: Update ST clock binding documentation ...
2014-08-04dmaengine: add device tree binding documentation for the nbpfaxi driverGuennadi Liakhovetski1-0/+20
The nbpfaxi dmaengine driver doesn't define any new bindings, it only uses standard dmaengine bindings and defines 3 flags for the 3rd parameter of the "dmas" property. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-31Merge tag 'for_3.17/samsung-clk' of ↵Mike Turquette4-4/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-next-samsung Samsung clock patches for 3.17 1) non-critical fixes (without need to push to stable): d5e136a clk: samsung: Register clk provider only after registering its all clocks 305cfab clk: samsung: Make of_device_id array const e9d5295 clk: samsung: exynos5420: Setup clocks before system suspend f65d518 clk: samsung: trivial: Correct typo in author's name 2) Exynos CLKOUT driver: 800c979 clk: samsung: exynos4: Add missing CPU/DMC clock hierarchy 01f7ec2 clk: samsung: exynos4: Add CLKOUT clock hierarchy 1e832e5 clk: samsung: Add driver to control CLKOUT line on Exynos SoCs d19bb39 ARM: dts: exynos: Update PMU node with CLKOUT related data 3) Clock hierarchy extensions: 17d3f1d clk: exynos4: Add PPMU IP block source clocks. ca5b402 clk: samsung: register exynos5420 apll/kpll configuration data 4) ARM CLKDOWN functionality enablement for Exynos4 and 3250: 42773b2 clk: samsung: exynos4: Enable ARMCLK down feature 45c5b0a clk: samsung: exynos3250: Enable ARMCLK down feature
2014-07-29clk: Add CLPS711X clk driverAlexander Shiyan1-0/+27
This adds the clock driver for Cirrus Logic CLPS711X series SoCs using common clock infrastructure. Designed primarily for migration CLPS711X subarch for multiplatform & DT, for this as the "OF" and "non-OF" calls implemented. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28Merge branch 'clk-rockchip' of ↵Arnd Bergmann4-0/+613
git://git.linaro.org/people/mike.turquette/linux into next/soc This is a dependency for the rk3288 DT updates, the branch should first get merged through Mike's clk git. * 'clk-rockchip' of git://git.linaro.org/people/mike.turquette/linux: ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER clk: rockchip: add clock controller for rk3288 dt-bindings: add documentation for rk3288 cru clk: rockchip: add clock driver for rk3188 and rk3066 clocks dt-bindings: add documentation for rk3188 clock and reset unit clk: rockchip: add reset controller clk: rockchip: add clock type for pll clocks and pll used on rk3066 clk: rockchip: add basic infrastructure for clock branches clk: composite: improve rate_hw sanity check logic clk: composite: allow read-only clocks clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-28Merge branch 'clk-rockchip' of ↵Arnd Bergmann4-0/+613
git://git.linaro.org/people/mike.turquette/linux into next/soc This is a dependency for the rk3288 DT updates, the branch should first get merged through Mike's clk git. * 'clk-rockchip' of git://git.linaro.org/people/mike.turquette/linux: ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER clk: rockchip: add clock controller for rk3288 dt-bindings: add documentation for rk3288 cru clk: rockchip: add clock driver for rk3188 and rk3066 clocks dt-bindings: add documentation for rk3188 clock and reset unit clk: rockchip: add reset controller clk: rockchip: add clock type for pll clocks and pll used on rk3066 clk: rockchip: add basic infrastructure for clock branches clk: composite: improve rate_hw sanity check logic clk: composite: allow read-only clocks clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26Merge tag 's5pv210-dt' of ↵Arnd Bergmann2-0/+273
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung S5PV210 DT support for v3.17" from Kukjin Kim: - support common clock framework for s5pv210 clock - add generic PHY driver on s5pv210 to support it via DT - add dt support for s5pv210-goni, smdkc110, smdkv210 and torbreck boards - remove board files from mach-s5pv210 and unused codes - enable multiplatform for s5pv210 * tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clk: samsung: s5pv210: Remove legacy board support ARM: SAMSUNG: Remove remaining legacy code gpio: samsung: Remove legacy support of S5PV210 ARM: S5PV210: Enable multi-platform build support cpufreq: s5pv210: Make the driver multiplatform aware ARM: S5PV210: Register cpufreq platform device ARM: S5PV210: move debug-macro.S into the common space ARM: S5PV210: Untie PM support from legacy code ARM: S5PV210: Remove support for board files ARM: dts: Add Device tree for s5pc110/s5pv210 boards ARM: dts: Add Device tree for s5pv210 SoC ARM: S5PV210: Add board file for boot using Device Tree phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver clk: samsung: Add S5PV210 Audio Subsystem clock driver ARM: SAMSUNG: Remove legacy clock code serial: samsung: Remove support for legacy clock code cpufreq: s3c24xx: Remove some dead code ARM: S5PV210: Migrate clock handling to Common Clock Framework clk: samsung: Add clock driver for S5PV210 and compatible SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26clk: samsung: trivial: Correct typo in author's nameTomasz Figa4-4/+4
This patch corrects mistyped author's name in four header files. While at it, a copy/paste error in author's e-mail in one of the headers is also fixed. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-07-26clk: samsung: exynos4: Add CLKOUT clock hierarchyTomasz Figa1-0/+5
This patch adds definitions of clocks that are used to drive clock output signals of particular CMU sub-blocks that are then fed to PMU and handled by Exynos CLKOUT driver added in further patch. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-07-26Merge tag 'qcom-clocks-for-3.17' of ↵Mike Turquette10-0/+1175
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into clk-next-msm qcom clock changes for 3.17 These patches add support for a handful of Qualcomm's SoC clock controllers: APQ8084 gcc and mmcc, IPQ8064 gcc, and APQ8064. There's also a small collection of bug fixes that aren't critical -rc worthy regressions because the consumer drivers aren't present or using the buggy clocks and one optimization for HDMI.
2014-07-24Merge tag 'omap-for-v3.16/fixes-rc6' of ↵Arnd Bergmann1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "Two regression fixes for omaps and one fix for device signaling" from Tony Lindgren: - L2 cache regression fix for a warning about trying to access a read-only register - GPMC ECC software fallback regression fix for omap3 - Fix for dra7 pinctrl pull-up direction that causes signal issues for anybody trying to use the internal pull up or down * tag 'omap-for-v3.16/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: gpmc: fix gpmc_hwecc_bch_capable() pinctrl: dra: dt-bindings: Fix pull enable/disable ARM: OMAP2+: l2c: squelch warning dump on power control setting Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-24Merge branch 'clk-rockchip' into clk-nextMike Turquette4-0/+613
2014-07-23pinctrl: dra: dt-bindings: Fix pull enable/disableNishanth Menon1-3/+4
The DRA74/72 control module pins have a weak pull up and pull down. This is configured by bit offset 17. if BIT(17) is 1, a pull up is selected, else a pull down is selected. However, this pull resisstor is applied based on BIT(16) - PULLUDENABLE - if BIT(18) is *0*, then pull as defined in BIT(17) is applied, else no weak pulls are applied. We defined this in reverse. Reference: Table 18-5 (Description of the pad configuration register bits) in Technical Reference Manual Revision (DRA74x revision Q: SPRUHI2Q Revised June 2014 and DRA72x revision F: SPRUHP2F - Revised June 2014) Fixes: 6e58b8f1daaf1a ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board") Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-22phy: miphy365x: Add MiPHY365x header file for DT x Driver definesLee Jones1-0/+14
This provides the shared header file which will be reference from both the MiPHY365x driver and its associated Device Tree node(s). Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-20Merge tag 'exynos-cpuidle' of ↵Olof Johansson1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung exynos cpuidle update for v3.17" from Kukjin Kim: - add callbacks exynos_suspend() and exynos_powered_up() for support cpuidle through mcpm - skip exynos_cpuidle for exynos5420 because is uses cpuidle-big-liggle generic cpuidle driver - add generic functions to calculate cpu number is used for pmu and this is required for exynos5420 multi-cluster - add of_device_id structure for big.LITTLE cpuidle and add "samsung,exynos5420" compatible string for exynos5420 * tag 'exynos-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: populate suspend and powered_up callbacks for mcpm ARM: EXYNOS: do not allow cpuidle registration for exynos5420 cpuidle: big.LITTLE: init driver for exynos5420 cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in config ARM: EXYNOS: add generic function to calculate cpu number cpuidle: big.LITTLE: add of_device_id structure + Linux 3.16-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'tegra-for-3.17-xusb-padctl' of ↵Olof Johansson1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: Add XUSB pad controller support" from Thierry Reding: Adds device tree bindings and a driver for the XUSB pad controller found on Tegra114 and later. This is a prerequisites for PCIe, SATA and XUSB drivers which are all currently being reviewed or pending for merge. This is a separate branch in case it needs to be pulled into the pinctrl tree to resolve conflicts. * tag 'tegra-for-3.17-xusb-padctl' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: pinctrl: Add NVIDIA Tegra XUSB pad controller support of: Add NVIDIA Tegra XUSB pad controller binding Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'zynq-dt-for-3.17' of git://git.xilinx.com/linux-xlnx into next/dtOlof Johansson1-1/+2
Merge "Xilinx Zynq changes for v3.17" from Michal Simek: arm: Xilinx Zynq dt patches for v3.17 - Document and use new cadence serial binding * tag 'zynq-dt-for-3.17' of git://git.xilinx.com/linux-xlnx: ARM: zynq: DT: Migrate UART to Cadence binding tty: cadence: Document DT binding + Linux 3.16-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'imx-dt-3.17' of ↵Olof Johansson5-1/+455
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree updates for 3.17" from Shawn Guo: The i.MX device tree updates for 3.17: - Add device tree sources and pin function header for i.MX6SX SoC - Initial imx6sx-sdb board support with FEC, MMC, USB, PMIC, Audio and GPIO key enabled - New board support: mbimxsd25 and mbimxsd27 from Eukrea, aristainetos imx6dl boards, Rex Pro and Basic, Ka-Ro TX6 - Restructure imx6qdl-wandboard.dtsi for new rev C1 board - Split M28EVK and M53EVK into SoM and EVK parts - A few correction around SDMA, SSI and SATA device nodes - Add eSATA support for Cubox-i board - Updates on edmqmx6 to enable PCIe, I2C and CAN - Use DT macro for clock ID for imx27 and imx6qdl - Add FlexCAN support for VF610 SoC * tag 'imx-dt-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (125 commits) ARM: dts: vf610: add FlexCAN node ARM: dts: add initial Rex Basic board support ARM: dts: add initial Rex Pro board support ARM: dts: mx5: Split M53EVK into SoM and EVK parts ARM: dts: imx6: RIoTboard explicitly define pad settings ARM: dts: vf610: fix length of eshdc1 register property ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. ARM: dts: imx53: correct clock-names of SATA node ARM: imx6: Align ssi nodes between mx6 variants ARM: i.MX27 clk: dts: Use clock defines in DTS files ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sx ARM: dts: imx6sx-sdb: Add audio support ARM: dts: imx6sx: Pass the fsl,fifo-depth property ARM: dts: imx6sx: Fix sdma node ARM: dts: imx6: edmqmx6: Add can bus ARM: dts: imx6: edmqmx6: Add two other i2c buses ARM: dts: imx6: edmqmx6: Add PCIe support ARM: dts: imx25-pdk: Add USB OTG support ARM: dts: i.MX53: add aipstz nodes ARM: dts: mxs: Split M28EVK into SoM and EVK parts ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18clk: samsung: Add S5PV210 Audio Subsystem clock driverTomasz Figa1-0/+34
This patch adds a driver for clock controller being a part of Audio Subsystem present on S5PV210 and compatible SoCs. It is used to provide clocks for other IP blocks of this subsystem. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>