| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Most of the internal definitions for PMU emulation are guarded with
CONFIG_HW_PERF_EVENTS. However, this isn't enough, and leads to
these definitions leaking if CONFIG_KVM isn't enabled.
This leads to some compilation breakage in this exact configuration.
Fix it by falling back to the dummy stubs if either perf or KVM
isn't selected.
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Huang Shijie reports that, when profiling a guest from the host
with a number of events that exceeds the number of available
counters, the reported counts are wildly inaccurate. Without
the counter oversubscription, the reported counts are correct.
Their investigation indicates that upon counter rotation (which
takes place on the back of a timer interrupt), we fail to
re-apply the guest EL0 enabling, leading to the counting of host
events instead of guest events.
In order to solve this, add yet another hook between the host PMU
driver and KVM, re-applying the guest EL0 configuration if the
right conditions apply (the host is VHE, we are in interrupt
context, and we interrupted a running vcpu). This triggers a new
vcpu request which will apply the correct configuration on guest
reentry.
With this, we have the correct counts, even when the counters are
oversubscribed.
Reported-by: Huang Shijie <shijie@os.amperecomputing.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Tested_by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230809013953.7692-1-shijie@os.amperecomputing.com
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230820090108.177817-1-maz@kernel.org
|
|
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when
running a preemptible kernel, as it is possible that a vCPU is blocked
without requesting a doorbell interrupt.
The issue is that any preemption that occurs between vgic_v4_put() and
schedule() on the block path will mark the vPE as nonresident and *not*
request a doorbell irq. This occurs because when the vcpu thread is
resumed on its way to block, vcpu_load() will make the vPE resident
again. Once the vcpu actually blocks, we don't request a doorbell
anymore, and the vcpu won't be woken up on interrupt delivery.
Fix it by tracking that we're entering WFI, and key the doorbell
request on that flag. This allows us not to make the vPE resident
when going through a preempt/schedule cycle, meaning we don't lose
any state.
Cc: stable@vger.kernel.org
Fixes: 8e01d9a396e6 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Suggested-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Common KVM changes for 6.5:
- Fix unprotected vcpu->pid dereference via debugfs
- Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals
- Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code
- Misc cleanups
|
|
There's no longer a need for the baggage of the old scheme for handling
configurable ID register fields. Rip it all out in favor of the
generalized infrastructure.
Link: https://lore.kernel.org/r/20230609190054.1542113-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Current usage of kvm_io_device requires users to destruct it with an extra
call of kvm_iodevice_destructor after the device gets unregistered from
kvm_io_bus. This is not necessary and can cause errors if a user forgot
to make the extra call.
Simplify the usage by combining kvm_iodevice_destructor into
kvm_io_bus_unregister_dev. This reduces LOCs a bit for users and can
avoid the leakage of destructing the device explicitly.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230207123713.3905-2-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM allows userspace to write an IMPDEF PMU version to the corresponding
32bit and 64bit ID register fields for the sake of backwards
compatibility with kernels that lacked commit 3d0dba5764b9 ("KVM: arm64:
PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation"). Plumbing
that IMPDEF PMU version through to the gues is getting in the way of
progress, and really doesn't any sense in the first place.
Bite the bullet and reinterpret the IMPDEF PMU version as NI (0) for
userspace writes. Additionally, spill the dirty details into a comment.
Link: https://lore.kernel.org/r/20230609190054.1542113-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
|
|
* kvm-arm64/smccc-filtering:
: .
: SMCCC call filtering and forwarding to userspace, courtesy of
: Oliver Upton. From the cover letter:
:
: "The Arm SMCCC is rather prescriptive in regards to the allocation of
: SMCCC function ID ranges. Many of the hypercall ranges have an
: associated specification from Arm (FF-A, PSCI, SDEI, etc.) with some
: room for vendor-specific implementations.
:
: The ever-expanding SMCCC surface leaves a lot of work within KVM for
: providing new features. Furthermore, KVM implements its own
: vendor-specific ABI, with little room for other implementations (like
: Hyper-V, for example). Rather than cramming it all into the kernel we
: should provide a way for userspace to handle hypercalls."
: .
KVM: selftests: Fix spelling mistake "KVM_HYPERCAL_EXIT_SMC" -> "KVM_HYPERCALL_EXIT_SMC"
KVM: arm64: Test that SMC64 arch calls are reserved
KVM: arm64: Prevent userspace from handling SMC64 arch range
KVM: arm64: Expose SMC/HVC width to userspace
KVM: selftests: Add test for SMCCC filter
KVM: selftests: Add a helper for SMCCC calls with SMC instruction
KVM: arm64: Let errors from SMCCC emulation to reach userspace
KVM: arm64: Return NOT_SUPPORTED to guest for unknown PSCI version
KVM: arm64: Introduce support for userspace SMCCC filtering
KVM: arm64: Add support for KVM_EXIT_HYPERCALL
KVM: arm64: Use a maple tree to represent the SMCCC filter
KVM: arm64: Refactor hvc filtering to support different actions
KVM: arm64: Start handling SMCs from EL1
KVM: arm64: Rename SMC/HVC call handler to reflect reality
KVM: arm64: Add vm fd device attribute accessors
KVM: arm64: Add a helper to check if a VM has ran once
KVM: x86: Redefine 'longmode' as a flag for KVM_EXIT_HYPERCALL
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/timer-vm-offsets: (21 commits)
: .
: This series aims at satisfying multiple goals:
:
: - allow a VMM to atomically restore a timer offset for a whole VM
: instead of updating the offset each time a vcpu get its counter
: written
:
: - allow a VMM to save/restore the physical timer context, something
: that we cannot do at the moment due to the lack of offsetting
:
: - provide a framework that is suitable for NV support, where we get
: both global and per timer, per vcpu offsetting, and manage
: interrupts in a less braindead way.
:
: Conflict resolution involves using the new per-vcpu config lock instead
: of the home-grown timer lock.
: .
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: selftests: Augment existing timer test to handle variable offset
KVM: arm64: selftests: Deal with spurious timer interrupts
KVM: arm64: selftests: Add physical timer registers to the sysreg list
KVM: arm64: nv: timers: Support hyp timer emulation
KVM: arm64: nv: timers: Add a per-timer, per-vcpu offset
KVM: arm64: Document KVM_ARM_SET_CNT_OFFSETS and co
KVM: arm64: timers: Abstract the number of valid timers per vcpu
KVM: arm64: timers: Fast-track CNTPCT_EL0 trap handling
KVM: arm64: Elide kern_hyp_va() in VHE-specific parts of the hypervisor
KVM: arm64: timers: Move the timer IRQs into arch_timer_vm_data
KVM: arm64: timers: Abstract per-timer IRQ access
KVM: arm64: timers: Rationalise per-vcpu timer init
KVM: arm64: timers: Allow save/restoring of the physical timer
KVM: arm64: timers: Allow userspace to set the global counter offset
KVM: arm64: Expose {un,}lock_all_vcpus() to the rest of KVM
KVM: arm64: timers: Allow physical offset without CNTPOFF_EL2
KVM: arm64: timers: Use CNTPOFF_EL2 to offset the physical timer
arm64: Add HAS_ECV_CNTPOFF capability
arm64: Add CNTPOFF_EL2 register definition
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As the SMCCC (and related specifications) march towards an 'everything
and the kitchen sink' interface for interacting with a system it becomes
less likely that KVM will support every related feature. We could do
better by letting userspace have a crack at it instead.
Allow userspace to define an 'SMCCC filter' that applies to both HVCs
and SMCs initiated by the guest. Supporting both conduits with this
interface is important for a couple of reasons. Guest SMC usage is table
stakes for a nested guest, as HVCs are always taken to the virtual EL2.
Additionally, guests may want to interact with a service on the secure
side which can now be proxied by userspace.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404154050.2270077-10-oliver.upton@linux.dev
|
|
Maple tree is an efficient B-tree implementation that is intended for
storing non-overlapping intervals. Such a data structure is a good fit
for the SMCCC filter as it is desirable to sparsely allocate the 32 bit
function ID space.
To that end, add a maple tree to kvm_arch and correctly init/teardown
along with the VM. Wire in a test against the hypercall filter for HVCs
which does nothing until the controls are exposed to userspace.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404154050.2270077-8-oliver.upton@linux.dev
|
|
KVM handles SMCCC calls from virtual EL2 that use the SMC instruction
since commit bd36b1a9eb5a ("KVM: arm64: nv: Handle SMCs taken from
virtual EL2"). Thus, the function name of the handler no longer reflects
reality.
Normalize the name on SMCCC, since that's the only hypercall interface
KVM supports in the first place. No fuctional change intended.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404154050.2270077-5-oliver.upton@linux.dev
|
|
Emulating EL2 also means emulating the EL2 timers. To do so, we expand
our timer framework to deal with at most 4 timers. At any given time,
two timers are using the HW timers, and the two others are purely
emulated.
The role of deciding which is which at any given time is left to a
mapping function which is called every time we need to make such a
decision.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-18-maz@kernel.org
|
|
Being able to set a global offset isn't enough.
With NV, we also need to a per-vcpu, per-timer offset (for example,
CNTVCT_EL0 being offset by CNTVOFF_EL2).
Use a similar method as the VM-wide offset to have a timer point
to the shadow register that contains the offset value.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-17-maz@kernel.org
|
|
Having the timer IRQs duplicated into each vcpu isn't great, and
becomes absolutely awful with NV. So let's move these into
the per-VM arch_timer_vm_data structure.
This simplifies a lot of code, but requires us to introduce a
mutex so that we can reason about userspace trying to change
an interrupt number while another vcpu is running, something
that wasn't really well handled so far.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-12-maz@kernel.org
|
|
As we are about to move the location of the per-timer IRQ into
the VM structure, abstract the location of the IRQ behind an
accessor. This will make the repainting sligntly less painful.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-11-maz@kernel.org
|
|
The way we initialise our timer contexts may be satisfactory
for two timers, but will be getting pretty annoying with four.
Cleanup the whole thing by removing the code duplication and
getting rid of unused IRQ configuration elements.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-10-maz@kernel.org
|
|
With ECV and CNTPOFF_EL2, it is very easy to offer an offset for
the physical timer. So let's do just that.
Nothing can set the offset yet, so this should have no effect
whatsoever (famous last words...).
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-5-maz@kernel.org
|
|
Instead of accumulating the fractional ns value generated every time
we compute a ns delta in a global variable, use a per-vcpu, per-timer
variable. This keeps the fractional ns local to the timer instead of
contributing to any odd, unrelated timer.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-2-maz@kernel.org
|
|
Having the ARM PMUv3 driver sitting in arch/arm64/kernel is getting
in the way of being able to use perf on ARMv8 cores running a 32bit
kernel, such as 32bit KVM guests.
This patch moves it into drivers/perf/arm_pmuv3.c, with an include
file in include/linux/perf/arm_pmuv3.h. The only thing left in
arch/arm64 is some mundane perf stuff.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Zaid Al-Bassam <zalbassam@google.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230317195027.3746949-2-zalbassam@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Having a per-vcpu virtual offset is a pain. It needs to be synchronized
on each update, and expands badly to a setup where different timers can
have different offsets, or have composite offsets (as with NV).
So let's start by replacing the use of the CNTVOFF_EL2 shadow register
(which we want to reclaim for NV anyway), and make the virtual timer
carry a pointer to a VM-wide offset.
This simplifies the code significantly. It also addresses two terrible bugs:
- The use of CNTVOFF_EL2 leads to some nice offset corruption
when the sysreg gets reset, as reported by Joey.
- The kvm mutex is taken from a vcpu ioctl, which goes against
the locking rules...
Reported-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230224173915.GA17407@e124191.cambridge.arm.com
Tested-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20230224191640.3396734-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM/riscv changes for 6.3
- Fix wrong usage of PGDIR_SIZE to check page sizes
- Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect()
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
|
|
Currently, the unknown no-running-vcpu sites are reported when a
dirty page is tracked by mark_page_dirty_in_slot(). Until now, the
only known no-running-vcpu site is saving vgic/its tables through
KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_SAVE_TABLES} command on KVM device
"kvm-arm-vgic-its". Unfortunately, there are more unknown sites to
be handled and no-running-vcpu context will be allowed in these
sites: (1) KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_RESTORE_TABLES} command
on KVM device "kvm-arm-vgic-its" to restore vgic/its tables. The
vgic3 LPI pending status could be restored. (2) Save vgic3 pending
table through KVM_DEV_ARM_{VGIC_GRP_CTRL, VGIC_SAVE_PENDING_TABLES}
command on KVM device "kvm-arm-vgic-v3".
In order to handle those unknown cases, we need a unified helper
vgic_write_guest_lock(). struct vgic_dist::save_its_tables_in_progress
is also renamed to struct vgic_dist::save_tables_in_progress.
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230126235451.469087-3-gshan@redhat.com
|
|
Define pr_fmt using KBUILD_MODNAME for all KVM x86 code so that printks
use consistent formatting across common x86, Intel, and AMD code. In
addition to providing consistent print formatting, using KBUILD_MODNAME,
e.g. kvm_amd and kvm_intel, allows referencing SVM and VMX (and SEV and
SGX and ...) as technologies without generating weird messages, and
without causing naming conflicts with other kernel code, e.g. "SEV: ",
"tdx: ", "sgx: " etc.. are all used by the kernel for non-KVM subsystems.
Opportunistically move away from printk() for prints that need to be
modified anyways, e.g. to drop a manual "kvm: " prefix.
Opportunistically convert a few SGX WARNs that are similarly modified to
WARN_ONCE; in the very unlikely event that the WARNs fire, odds are good
that they would fire repeatedly and spam the kernel log without providing
unique information in each print.
Note, defining pr_fmt yields undesirable results for code that uses KVM's
printk wrappers, e.g. vcpu_unimpl(). But, that's a pre-existing problem
as SVM/kvm_amd already defines a pr_fmt, and thankfully use of KVM's
wrappers is relatively limited in KVM x86 code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20221130230934.1014142-35-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For a number of historical reasons, the KVM/arm64 hotplug setup is pretty
complicated, and we have two extra CPUHP notifiers for vGIC and timers.
It looks pretty pointless, and gets in the way of further changes.
So let's just expose some helpers that can be called from the core
CPUHP callback, and get rid of everything else.
This gives us the opportunity to drop a useless notifier entry,
as well as tidy-up the timer enable/disable, which was a bit odd.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
* kvm-arm64/pmu-unchained:
: .
: PMUv3 fixes and improvements:
:
: - Make the CHAIN event handling strictly follow the architecture
:
: - Add support for PMUv3p5 (64bit counters all the way)
:
: - Various fixes and cleanups
: .
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: arm64: PMU: Sanitise PMCR_EL0.LP on first vcpu run
KVM: arm64: PMU: Simplify PMCR_EL0 reset handling
KVM: arm64: PMU: Replace version number '0' with ID_AA64DFR0_EL1_PMUVer_NI
KVM: arm64: PMU: Make kvm_pmc the main data structure
KVM: arm64: PMU: Simplify vcpu computation on perf overflow notification
KVM: arm64: PMU: Allow PMUv3p5 to be exposed to the guest
KVM: arm64: PMU: Implement PMUv3p5 long counter support
KVM: arm64: PMU: Allow ID_DFR0_EL1.PerfMon to be set from userspace
KVM: arm64: PMU: Allow ID_AA64DFR0_EL1.PMUver to be set from userspace
KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation
KVM: arm64: PMU: Do not let AArch32 change the counters' top 32 bits
KVM: arm64: PMU: Simplify setting a counter to a specific value
KVM: arm64: PMU: Add counter_index_to_*reg() helpers
KVM: arm64: PMU: Only narrow counters that are not 64bit wide
KVM: arm64: PMU: Narrow the overflow checking when required
KVM: arm64: PMU: Distinguish between 64bit counter and 64bit overflow
KVM: arm64: PMU: Always advertise the CHAIN event
KVM: arm64: PMU: Align chained counter implementation with architecture pseudocode
arm64: Add ID_DFR0_EL1.PerfMon values for PMUv3p7 and IMP_DEF
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
PMUv3p5 (which is mandatory with ARMv8.5) comes with some extra
features:
- All counters are 64bit
- The overflow point is controlled by the PMCR_EL0.LP bit
Add the required checks in the helpers that control counter
width and overflow, as well as the sysreg handling for the LP
bit. A new kvm_pmu_is_3p5() helper makes it easy to spot the
PMUv3p5 specific handling.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-14-maz@kernel.org
|
|
As further patches will enable the selection of a PMU revision
from userspace, sample the supported PMU revision at VM creation
time, rather than building each time the ID_AA64DFR0_EL1 register
is accessed.
This shouldn't result in any change in behaviour.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-11-maz@kernel.org
|
|
pseudocode
Ricardo recently pointed out that the PMU chained counter emulation
in KVM wasn't quite behaving like the one on actual hardware, in
the sense that a chained counter would expose an overflow on
both halves of a chained counter, while KVM would only expose the
overflow on the top half.
The difference is subtle, but significant. What does the architecture
say (DDI0087 H.a):
- Up to PMUv3p4, all counters but the cycle counter are 32bit
- A 32bit counter that overflows generates a CHAIN event on the
adjacent counter after exposing its own overflow status
- The CHAIN event is accounted if the counter is correctly
configured (CHAIN event selected and counter enabled)
This all means that our current implementation (which uses 64bit
perf events) prevents us from emulating this overflow on the lower half.
How to fix this? By implementing the above, to the letter.
This largely results in code deletion, removing the notions of
"counter pair", "chained counters", and "canonical counter".
The code is further restructured to make the CHAIN handling similar
to SWINC, as the two are now extremely similar in behaviour.
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20221113163832.3154370-3-maz@kernel.org
|
|
Enable ring-based dirty memory tracking on ARM64:
- Enable CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL.
- Enable CONFIG_NEED_KVM_DIRTY_RING_WITH_BITMAP.
- Set KVM_DIRTY_LOG_PAGE_OFFSET for the ring buffer's physical page
offset.
- Add ARM64 specific kvm_arch_allow_write_without_running_vcpu() to
keep the site of saving vgic/its tables out of the no-running-vcpu
radar.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-5-gshan@redhat.com
|
|
Align kvm_vgic_addr() with the rest of the code by moving the
userspace accesses into it. kvm_vgic_addr() is also made static.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We carry a legacy interface to set the base addresses for GICv2.
As this is currently plumbed into the same handling code as
the modern interface, it limits the evolution we can make there.
Add a helper dedicated to this handling, with a view of maybe
removing this in the future.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/per-vcpu-host-pmu-data:
: .
: Pass the host PMU state in the vcpu to avoid the use of additional
: shared memory between EL1 and EL2 (this obviously only applies
: to nVHE and Protected setups).
:
: Patches courtesy of Fuad Tabba.
: .
KVM: arm64: pmu: Restore compilation when HW_PERF_EVENTS isn't selected
KVM: arm64: Reenable pmu in Protected Mode
KVM: arm64: Pass pmu events to hyp via vcpu
KVM: arm64: Repack struct kvm_pmu to reduce size
KVM: arm64: Wrapper for getting pmu_events
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/vgic-invlpir:
: .
: Implement MMIO-based LPI invalidation for vGICv3.
: .
KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revision
KVM: arm64: vgic-v3: Implement MMIO-based LPI invalidation
KVM: arm64: vgic-v3: Expose GICR_CTLR.RWP when disabling LPIs
irqchip/gic-v3: Exposes bit values for GICR_CTLR.{IR, CES}
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/hcall-selection:
: .
: Introduce a new set of virtual sysregs for userspace to
: select the hypercalls it wants to see exposed to the guest.
:
: Patches courtesy of Raghavendra and Oliver.
: .
KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run
KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace
Documentation: Fix index.rst after psci.rst renaming
selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list
selftests: KVM: aarch64: Introduce hypercall ABI test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
tools: Import ARM SMCCC definitions
Docs: KVM: Add doc for the bitmap firmware registers
Docs: KVM: Rename psci.rst to hypercalls.rst
KVM: arm64: Add vendor hypervisor firmware register
KVM: arm64: Add standard hypervisor firmware register
KVM: arm64: Setup a framework for hypercall bitmap firmware registers
KVM: arm64: Factor out firmware register handling from psci.c
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Moving kvm_pmu_events into the vcpu (and refering to it) broke the
somewhat unusual case where the kernel has no support for a PMU
at all.
In order to solve this, move things around a bit so that we can
easily avoid refering to the pmu structure outside of PMU-aware
code. As a bonus, pmu.c isn't compiled in when HW_PERF_EVENTS
isn't selected.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/202205161814.KQHpOzsJ-lkp@intel.com
|
|
Instead of the host accessing hyp data directly, pass the pmu
events of the current cpu to hyp via the vcpu.
This adds 64 bits (in two fields) to the vcpu that need to be
synced before every vcpu run in nvhe and protected modes.
However, it isolates the hypervisor from the host, which allows
us to use pmu in protected mode in a subsequent patch.
No visible side effects in behavior intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-4-tabba@google.com
|
|
struct kvm_pmu has 2 holes using 10 bytes. This is instantiated
in all vcpus, so it adds up. Repack the structures to remove the
holes.
No functional change intended.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-3-tabba@google.com
|
|
Since adversising GICR_CTLR.{IC,CES} is directly observable from
a guest, we need to make it selectable from userspace.
For that, bump the default GICD_IIDR revision and let userspace
downgrade it to the previous default. For GICv2, the two distributor
revisions are strictly equivalent.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405182327.205520-5-maz@kernel.org
|
|
Since GICv4.1, it has become legal for an implementation to advertise
GICR_{INVLPIR,INVALLR,SYNCR} while having an ITS, allowing for a more
efficient invalidation scheme (no guest command queue contention when
multiple CPUs are generating invalidations).
Provide the invalidation registers as a primitive to their ITS
counterpart. Note that we don't advertise them to the guest yet
(the architecture allows an implementation to do this).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Link: https://lore.kernel.org/r/20220405182327.205520-4-maz@kernel.org
|
|
When disabling LPIs, a guest needs to poll GICR_CTLR.RWP in order
to be sure that the write has taken effect. We so far reported it
as 0, as we didn't advertise that LPIs could be turned off the
first place.
Start tracking this state during which LPIs are being disabled,
and expose the 'in progress' state via the RWP bit.
We also take this opportunity to disallow enabling LPIs and programming
GICR_{PEND,PROP}BASER while LPI disabling is in progress, as allowed by
the architecture (UNPRED behaviour).
We don't advertise the feature to the guest yet (which is allowed by
the architecture).
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405182327.205520-3-maz@kernel.org
|
|
KVM regularly introduces new hypercall services to the guests without
any consent from the userspace. This means, the guests can observe
hypercall services in and out as they migrate across various host
kernel versions. This could be a major problem if the guest
discovered a hypercall, started using it, and after getting migrated
to an older kernel realizes that it's no longer available. Depending
on how the guest handles the change, there's a potential chance that
the guest would just panic.
As a result, there's a need for the userspace to elect the services
that it wishes the guest to discover. It can elect these services
based on the kernels spread across its (migration) fleet. To remedy
this, extend the existing firmware pseudo-registers, such as
KVM_REG_ARM_PSCI_VERSION, but by creating a new COPROC register space
for all the hypercall services available.
These firmware registers are categorized based on the service call
owners, but unlike the existing firmware pseudo-registers, they hold
the features supported in the form of a bitmap.
During the VM initialization, the registers are set to upper-limit of
the features supported by the corresponding registers. It's expected
that the VMMs discover the features provided by each register via
GET_ONE_REG, and write back the desired values using SET_ONE_REG.
KVM allows this modification only until the VM has started.
Some of the standard features are not mapped to any bits of the
registers. But since they can recreate the original problem of
making it available without userspace's consent, they need to
be explicitly added to the case-list in
kvm_hvc_call_default_allowed(). Any function-id that's not enabled
via the bitmap, or not listed in kvm_hvc_call_default_allowed, will
be returned as SMCCC_RET_NOT_SUPPORTED to the guest.
Older userspace code can simply ignore the feature and the
hypercall services will be exposed unconditionally to the guests,
thus ensuring backward compatibility.
In this patch, the framework adds the register only for ARM's standard
secure services (owner value 4). Currently, this includes support only
for ARM True Random Number Generator (TRNG) service, with bit-0 of the
register representing mandatory features of v1.0. Other services are
momentarily added in the upcoming patches.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
[maz: reduced the scope of some helpers, tidy-up bitmap max values,
dropped error-only fast path]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-3-rananta@google.com
|
|
Common hypercall firmware register handing is currently employed
by psci.c. Since the upcoming patches add more of these registers,
it's better to move the generic handling to hypercall.c for a
cleaner presentation.
While we are at it, collect all the firmware registers under
fw_reg_ids[] to help implement kvm_arm_get_fw_num_regs() and
kvm_arm_copy_fw_reg_indices() in a generic way. Also, define
KVM_REG_FEATURE_LEVEL_MASK using a GENMASK instead.
No functional change intended.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
[maz: fixed KVM_REG_FEATURE_LEVEL_MASK]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-2-rananta@google.com
|
|
kvm_cpu_has_pending_timer() ends up checking all the possible
timers for a wake-up cause. However, we already check for
pending interrupts whenever we try to wake-up a vcpu, including
the timer interrupts.
Obviously, doing the same work twice is once too many. Reduce
this helper to almost nothing, but keep it around, as we are
going to make use of it soon.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419182755.601427-4-maz@kernel.org
|
|
* kvm-arm64/psci-1.1:
: .
: Limited PSCI-1.1 support from Will Deacon:
:
: This small series exposes the PSCI SYSTEM_RESET2 call to guests, which
: allows the propagation of a "reset_type" and a "cookie" back to the VMM.
: Although Linux guests only ever pass 0 for the type ("SYSTEM_WARM_RESET"),
: the vendor-defined range can be used by a bootloader to provide additional
: information about the reset, such as an error code.
: .
KVM: arm64: Remove unneeded semicolons
KVM: arm64: Indicate SYSTEM_RESET2 in kvm_run::system_event flags field
KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest
KVM: arm64: Bump guest PSCI version to 1.1
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Expose PSCI version v1.1 to the guest by default. The only difference
for now is that an updated version number is reported by PSCI_VERSION.
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220221153524.15397-2-will@kernel.org
|
|
* kvm-arm64/pmu-bl:
: .
: Improve PMU support on heterogeneous systems, courtesy of Alexandru Elisei
: .
KVM: arm64: Refuse to run VCPU if the PMU doesn't match the physical CPU
KVM: arm64: Add KVM_ARM_VCPU_PMU_V3_SET_PMU attribute
KVM: arm64: Keep a list of probed PMUs
KVM: arm64: Keep a per-VM pointer to the default PMU
perf: Fix wrong name in comment for struct perf_cpu_context
KVM: arm64: Do not change the PMU event filter after a VCPU has run
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The ARM PMU driver calls kvm_host_pmu_init() after probing to tell KVM that
a hardware PMU is available for guest emulation. Heterogeneous systems can
have more than one PMU present, and the callback gets called multiple
times, once for each of them. Keep track of all the PMUs available to KVM,
as they're going to be needed later.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-5-alexandru.elisei@arm.com
|
|
kvm_psci_version() consumes a pointer to struct kvm in addition to a
vcpu pointer. Drop the kvm pointer as it is unused. While the comment
suggests the explicit kvm pointer was useful for calling from hyp, there
exist no such callsite in hyp.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220208012705.640444-1-oupton@google.com
|
