summaryrefslogtreecommitdiff
path: root/include/linux/basic_mmio_gpio.h
AgeCommit message (Collapse)AuthorFilesLines
2016-01-05gpio: generic: factor into gpio_chip structLinus Walleij1-80/+0
The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27gpio: generic: support input-only chipsRabin Vincent1-0/+1
Allow chips to indicates that they are input-only and thus cannot set the output value. This will be used by the gpio-etraxfs driver. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-11gpio: gpio-generic: add flag to read out output value from reg_setVladimir Zapolskiy1-0/+1
The change introduces BGPIOF_READ_OUTPUT_REG_SET flag for gpio-generic GPIO chip implementation, which allows to get correct configured value from reg_set register, input value is still get from reg_dat. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-06gpio: generic: Add label to platform dataPawel Moll1-0/+1
When registering more than one platform device, it is useful to set the gpio chip label in the platform data. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11gpio: gpio-generic: Add 16 and 32 bit big endian byte order supportAndreas Larsson1-0/+1
There is no general support for 64-bit big endian accesses, so that is left unsupported. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-19gpio/generic: initialize basic_mmio_gpio shadow variables properlyShawn Guo1-1/+5
It fixes the issue in gpio-generic that commit fb14921 (gpio/mxc: add missing initialization of basic_mmio_gpio shadow variables) manged to fix in gpio-mxc driver, so that other platform specific drivers do not suffer from the same problem over and over again. Changes since v1: * Turn the last parameter of bgpio_init() "bool big_endian" into "unsigned long flags" and give those really quirky hardwares a chance to tell that reg_set and reg_dir are unreadable. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> [grant.likely: Fix big-endian usage to explicitly set BBGPIOF_BIG_ENDIAN] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-09-15drivers/gpio/gpio-generic.c: fix build errorsRussell King1-10/+5
Building a kernel with hotplug disabled results in a link failure: `bgpio_remove' referenced in section `___ksymtab_gpl+bgpio_remove' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o This is because of bgpio_remove() is exported. It is illegal to export symbols which are discarded either at link time or as part of an init/exit section. Fix this by dropping the __devexit attributation from bgpio_remove(). Also drop the __devinit attributation from bgpio_init(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-10gpio/basic_mmio: add missing include of spinlock_types.hJamie Iles1-0/+1
include/linux/basic_mmio_gpio.h uses a spinlock_t without including any of the spinlock headers resulting in this compiler warning. include/linux/basic_mmio_gpio.h:51:2: error: expected specifier-qualifier-list before 'spinlock_t' Explicitly include linux/spinlock_types.h to fix it. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20basic_mmio_gpio: split into a gpio library and platform deviceJamie Iles1-0/+55
Allow GPIO_BASIC_MMIO_CORE to be used to provide an accessor library for implementing GPIO drivers whilst abstracting the register access detail. Based on a patch from Anton Vorontsov[1] and adapted to allow bgpio_chip to be embedded in another structure. Changes since v1: - Register the gpio_chip in the platform device probe 1. https://lkml.org/lkml/2011/4/19/401 Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20basic_mmio_gpio: allow overriding number of gpioJamie Iles1-0/+1
Some platforms may have a number of GPIO that is less than the register width of the peripheral. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-28gpio: add driver for basic memory-mapped GPIO controllersAnton Vorontsov1-0/+20
The basic GPIO controllers may be found in various on-board FPGA and ASIC solutions that are used to control board's switches, LEDs, chip-selects, Ethernet/USB PHY power, etc. These controllers may not provide any means of pin setup (in/out/open drain). The driver supports: - 8/16/32/64 bits registers; - GPIO controllers with clear/set registers; - GPIO controllers with a single "data" register; - Big endian bits/GPIOs ordering (mostly used on PowerPC). Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Brownell <david-b@pacbell.net> Cc: Samuel Ortiz <sameo@linux.intel.com>, Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>