summaryrefslogtreecommitdiff
path: root/include/linux/clockchips.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-12Revert "clockevents: Add a clkevt-of mechanism like clksrc-of"Daniel Lezcano1-9/+0
After discussing it, this feature is dropped as it is not considered adequate: https://patchwork.kernel.org/patch/9639317/ There is no user of this macro yet, so there is no impact on the drivers. This reverts commit 376bc27150f180d9f5eddec6a14117780177589d. Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-05-02Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer departement delivers: - more year 2038 rework - a massive rework of the arm achitected timer - preparatory patches to allow NTP correction of clock event devices to avoid early expiry - the usual pile of fixes and enhancements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits) timer/sysclt: Restrict timer migration sysctl values to 0 and 1 arm64/arch_timer: Mark errata handlers as __maybe_unused Clocksource/mips-gic: Remove redundant non devicetree init MIPS/Malta: Probe gic-timer via devicetree clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver clocksource: arm_arch_timer: add GTDT support for memory-mapped timer acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource: arm_arch_timer: simplify ACPI support code. acpi/arm64: Add GTDT table parse driver clocksource: arm_arch_timer: split MMIO timer probing. clocksource: arm_arch_timer: add structs to describe MMIO timer clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call clocksource: arm_arch_timer: refactor arch_timer_needs_probing clocksource: arm_arch_timer: split dt-only rate handling x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks um/time: Set ->min_delta_ticks and ->max_delta_ticks tile/time: Set ->min_delta_ticks and ->max_delta_ticks score/time: Set ->min_delta_ticks and ->max_delta_ticks ...
2017-03-28clockevents: Fix syntax error in clkevt-of macroAlexander Kochetkov1-1/+1
The patch fix syntax errors introduced by commit 0c8893c9095d ("clockevents: Add a clkevt-of mechanism like clksrc-of"). Fixes: 0c8893c9095d ("clockevents: Add a clkevt-of mechanism like clksrc-of") Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-03-23clockevents: Make clockevents_config() staticNicolai Stange1-1/+0
A clockevent device's rate should be configured before or at registration and changed afterwards through clockevents_update_freq() only. For the configuration at registration, we already have clockevents_config_and_register(). Right now, there are no clockevents_config() users outside of the clockevents core. To mitigiate the risk of drivers errorneously reconfiguring their rates through clockevents_config() *after* device registration, make clockevents_config() static. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-02-07clockevents: Add a clkevt-of mechanism like clksrc-ofDaniel Lezcano1-0/+9
The current code uses the CLOCKSOURCE_OF_DECLARE macro to fill the clksrc table with a t-uple (name, init_function). Unfortunately it ends up to the clockevent and the clocksource being both initialized with this macro. It is not a problem by itself but there is not a clear distinction between a clockevent and a clocksource in the code initialization path. Somebody can argue there are the same IP block and the same DT node. But conceptually from the software side, there are two distincts entities and as is they should be initialized separetely. Some drivers which do not have a clocksource end up by using the CLOCKSOURCE_OF_DECLARE macro to declare a clockevent. Another result is the fuzzy organization in the clocksource directory, where the clockevents are implemented in the same file than the clocksources or file labelled timer-something implementing a clocksource. This patch provides another macro to specifically declare a clockevent in the same way than the clocksource and gives the opportunity to write two separate drivers, one for the clocksource and another for the clockevents. Hopefully, that can help to do some housework in the directory, perhaps split the drivers in to entities, for example: - clksrc-rockchip.c - clkevt-rockchip.c Also, it gives the possibility to declare clocksources separately in the DT and then use a clocksource from IP block while while clockevents are used from another IP block. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-01-27clockevents: Rename last parameter of clocks_calc_mult_shift() to maxsecAlexander Kuleshov1-2/+2
Last parameter of the clocks_calc_mult_shift() was renamed from minsec to maxsec in the 5fdade95 (time: Rename misnamed minsec argument of clocks_calc_mult_shift()). Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Link: http://lkml.kernel.org/r/1444987253-11018-1-git-send-email-kuleshovmail@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-14clockevents: Remove unused set_mode() callbackViresh Kumar1-24/+5
All users are migrated to the per-state callbacks, get rid of the unused interface and the core support code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linaro-kernel@lists.linaro.org Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/fd60de14cf6d125489c031207567bb255ad946f6.1441943991.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-20clockevents: Remove clockevents_notify() prototypeStephen Boyd1-3/+0
This function no longer exists after commit a49b116dcb12 (clockevents: Cleanup dead cpu explicitely, 2015-04-03). Remove the prototype and the stub function. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: trivial@kernel.org Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: http://lkml.kernel.org/r/1436984500-5425-1-git-send-email-sboyd@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-02clockevents: Rename state to state_use_accessorsThomas Gleixner1-7/+7
The only sensible way to make abuse of core internal fields obvious and easy to grep for. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org>
2015-06-02clockevents: Add helpers to check the state of a clockevent deviceViresh Kumar1-0/+26
Some clockevent drivers, once migrated to use per-state callbacks, need to check the state of the clockevent device in their callbacks or interrupt handler. Add accessor functions clockevent_state_*() to get this information. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/04a717d490335c688dd7af899fbcede97e1bb8ee.1432192527.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-19clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED stateViresh Kumar1-1/+6
When no timers/hrtimers are pending, the expiry time is set to a special value: 'KTIME_MAX'. This normally happens with NO_HZ_{IDLE|FULL} in both LOWRES/HIGHRES modes. When 'expiry == KTIME_MAX', we either cancel the 'tick-sched' hrtimer (NOHZ_MODE_HIGHRES) or skip reprogramming clockevent device (NOHZ_MODE_LOWRES). But, the clockevent device is already reprogrammed from the tick-handler for next tick. As the clock event device is programmed in ONESHOT mode it will at least fire one more time (unnecessarily). Timers on few implementations (like arm_arch_timer, etc.) only support PERIODIC mode and their drivers emulate ONESHOT over that. Which means that on these platforms we will get spurious interrupts periodically (at last programmed interval rate, normally tick rate). In order to avoid spurious interrupts, the clockevent device should be stopped or its interrupts should be masked. A simple (yet hacky) solution to get this fixed could be: update hrtimer_force_reprogram() to always reprogram clockevent device and update clockevent drivers to STOP generating events (or delay it to max time) when 'expires' is set to KTIME_MAX. But the drawback here is that every clockevent driver has to be hacked for this particular case and its very easy for new ones to miss this. However, Thomas suggested to add an optional state ONESHOT_STOPPED to solve this problem: lkml.org/lkml/2014/5/9/508. This patch adds support for ONESHOT_STOPPED state in clockevents core. It will only be available to drivers that implement the state-specific callbacks instead of the legacy ->set_mode() callback. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com> Cc: linaro-kernel@lists.linaro.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/b8b383a03ac07b13312c16850b5106b82e4245b5.1428031396.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-03clockevents: Cleanup dead cpu explicitelyThomas Gleixner1-6/+0
clockevents_notify() is a leftover from the early design of the clockevents facility. It's really not a notification mechanism, it's a multiplex call. We are way better off to have explicit calls instead of this monstrosity. Split out the cleanup function for a dead cpu and invoke it directly from the cpu down code. Make it conditional on CPU_HOTPLUG as well. Temporary change, will be refined in the future. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Rebased, added clockevents_notify() removal ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1735025.raBZdQHM3m@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03clockevents: Make tick handover explicitThomas Gleixner1-1/+0
clockevents_notify() is a leftover from the early design of the clockevents facility. It's really not a notification mechanism, it's a multiplex call. We are way better off to have explicit calls instead of this monstrosity. Split out the tick_handover call and invoke it explicitely from the hotplug code. Temporary solution will be cleaned up in later patches. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Rebase ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1658173.RkEEILFiQZ@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03clockevents: Remove broadcast oneshot control leftoversRafael J. Wysocki1-2/+0
Now that all users are converted over to explicit calls into the clockevents state machine, remove the notification chain leftovers. Original-from: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/14018863.NQUzkFuafr@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03clockevents: Remove the broadcast control leftoversThomas Gleixner1-3/+0
All users converted. Remove the notify leftovers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/2076318.76XJZ8QYP3@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02clockevents: Clean up clockchips.hIngo Molnar1-46/+41
Do various cleanups on the clockchips.h file: - indent preprocessor blocks to make it more clear which block we are in, this also makes merge resolution easier - comment larger preprocessor blocks consistently, using the: #if FOO ... #else /* !FOO: */ ... #endif /* !FOO */ notation. - unbreak lines - etc. No change in functionality. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01arm/bL_switcher: Kill tick suspend hackeryThomas Gleixner1-6/+0
Use the new tick_suspend/resume_local() and get rid of the homebrewn implementation of these in the ARM bL switcher. The check for the cpumask is completely pointless. There is no harm to suspend a per cpu tick device unconditionally. If that's a real issue then we fix it proper at the core level and not with some completely undocumented hacks in some random core code. Move the tick internals to the core code, now that this nuisance is gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ rjw: Rebase, changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Link: http://lkml.kernel.org/r/1655112.Ws17YsMfN7@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01clockevents: Make suspend/resume calls explicitThomas Gleixner1-2/+0
clockevents_notify() is a leftover from the early design of the clockevents facility. It's really not a notification mechanism, it's a multiplex call. We are way better off to have explicit calls instead of this monstrosity. Split out the suspend/resume() calls and invoke them directly from the call sites. No locking required at this point because these calls happen with interrupts disabled and a single cpu online. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Rebased on top of 4.0-rc5. ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/713674030.jVm1qaHuPf@vostro.rjw.lan [ Rebased on top of latest timers/core. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01tick: Move core only declarations and functions to coreThomas Gleixner1-9/+6
No point to expose everything to the world. People just believe such functions can be abused for whatever purposes. Sigh. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Rebased on top of 4.0-rc5 ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Nicolas Pitre <nico@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/28017337.VbCUc39Gme@vostro.rjw.lan [ Merged to latest timers/core ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01clockevents: Remove CONFIG_GENERIC_CLOCKEVENTS_BUILDThomas Gleixner1-6/+3
This option was for simpler migration to the clock events code. Most architectures have been converted and the option has been disfunctional as a standalone option for quite some time. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5021859.jl9OC1medj@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27clockevents: Manage device's state separately for the coreViresh Kumar1-13/+31
'enum clock_event_mode' is used for two purposes today: - to pass mode to the driver of clockevent device::set_mode(). - for managing state of the device for clockevents core. For supporting new modes/states we have moved away from the legacy set_mode() callback to new per-mode/state callbacks. New modes/states shouldn't be exposed to the legacy (now OBSOLOTE) callbacks and so we shouldn't add new states to 'enum clock_event_mode'. Lets have separate enums for the two use cases mentioned above. Keep using the earlier enum for legacy set_mode() callback and mark it OBSOLETE. And add another enum to clearly specify the possible states of a clockevent device. This also renames the newly added per-mode callbacks to reflect state changes. We haven't got rid of 'mode' member of 'struct clock_event_device' as it is used by some of the clockevent drivers and it would automatically die down once we migrate those drivers to the new interface. It ('mode') is only updated now for the drivers using the legacy interface. Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: linaro-kernel@lists.linaro.org Cc: linaro-networking@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/b6b0143a8a57bd58352ad35e08c25424c879c0cb.1425037853.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27clockevents: Handle tick device's resume separatelyViresh Kumar1-2/+2
Upcoming patch will redefine possible states of a clockevent device. The RESUME mode is a special case only for tick's clockevent devices. In future it can be replaced by ->resume() callback already available for clockevent devices. Lets handle it separately so that clockevents_set_mode() only handles states valid across all devices. This also renames set_mode_resume() to tick_resume() to make it more explicit. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: linaro-kernel@lists.linaro.org Cc: linaro-networking@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/c1b0112410870f49e7bf06958e1483eac6c15e20.1425037853.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18clockevents: Introduce mode specific callbacksViresh Kumar1-2/+19
It is not possible for the clockevents core to know which modes (other than those with a corresponding feature flag) are supported by a particular implementation. And drivers are expected to handle transition to all modes elegantly, as ->set_mode() would be issued for them unconditionally. Now, adding support for a new mode complicates things a bit if we want to use the legacy ->set_mode() callback. We need to closely review all clockevents drivers to see if they would break on addition of a new mode. And after such reviews, it is found that we have to do non-trivial changes to most of the drivers [1]. Introduce mode-specific set_mode_*() callbacks, some of which the drivers may or may not implement. A missing callback would clearly convey the message that the corresponding mode isn't supported. A driver may still choose to keep supporting the legacy ->set_mode() callback, but ->set_mode() wouldn't be supporting any new modes beyond RESUME. If a driver wants to benefit from using a new mode, it would be required to migrate to the mode specific callbacks. The legacy ->set_mode() callback and the newly introduced mode-specific callbacks are mutually exclusive. Only one of them should be supported by the driver. Sanity check is done at the time of registration to distinguish between optional and required callbacks and to make error recovery and handling simpler. If the legacy ->set_mode() callback is provided, all mode specific ones would be ignored by the core but a warning is thrown if they are present. Call sites calling ->set_mode() directly are also updated to use __clockevents_set_mode() instead, as ->set_mode() may not be available anymore for few drivers. [1] https://lkml.org/lkml/2014/12/9/605 [2] https://lkml.org/lkml/2015/1/23/255 Suggested-by: Thomas Gleixner <tglx@linutronix.de> [2] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: linaro-kernel@lists.linaro.org Cc: linaro-networking@linaro.org Link: http://lkml.kernel.org/r/792d59a40423f0acffc9bb0bec9de1341a06fa02.1423788565.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-09tick: Fixup more fallout from hrtimer broadcast modePreeti U Murthy1-0/+1
The hrtimer mode of broadcast is supported only when GENERIC_CLOCKEVENTS_BROADCAST and TICK_ONESHOT config options are enabled. Hence compile in the functions for hrtimer mode of broadcast only when these options are selected. Also fix max_delta_ticks value for the pseudo clock device. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/52F719EE.9010304@linux.vnet.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-07time: Fixup fallout from recent clockevent/tick changesThomas Gleixner1-1/+1
Make the stub function static inline instead of static and move the clockevents related function into the proper ifdeffed section. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
2014-02-07tick: Introduce hrtimer based broadcastPreeti U Murthy1-0/+9
On some architectures, in certain CPU deep idle states the local timers stop. An external clock device is used to wakeup these CPUs. The kernel support for the wakeup of these CPUs is provided by the tick broadcast framework by using the external clock device as the wakeup source. However not all implementations of architectures provide such an external clock device. This patch includes support in the broadcast framework to handle the wakeup of the CPUs in deep idle states on such systems by queuing a hrtimer on one of the CPUs, which is meant to handle the wakeup of CPUs in deep idle states. This patchset introduces a pseudo clock device which can be registered by the archs as tick_broadcast_device in the absence of a real external clock device. Once registered, the broadcast framework will work as is for these architectures as long as the archs take care of the BROADCAST_ENTER notification failing for one of the CPUs. This CPU is made the stand by CPU to handle wakeup of the CPUs in deep idle and it *must not enter deep idle states*. The CPU with the earliest wakeup is chosen to be this CPU. Hence this way the stand by CPU dynamically moves around and so does the hrtimer which is queued to trigger at the next earliest wakeup time. This is consistent with the case where an external clock device is present. The smp affinity of this clock device is set to the CPU with the earliest wakeup. This patchset handles the hotplug of the stand by CPU as well by moving the hrtimer on to the CPU handling the CPU_DEAD notification. Originally-from: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: deepthi@linux.vnet.ibm.com Cc: paulmck@linux.vnet.ibm.com Cc: fweisbec@gmail.com Cc: paulus@samba.org Cc: srivatsa.bhat@linux.vnet.ibm.com Cc: svaidy@linux.vnet.ibm.com Cc: peterz@infradead.org Cc: benh@kernel.crashing.org Cc: rafael.j.wysocki@intel.com Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20140207080632.17187.80532.stgit@preeti.in.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-07time: Change the return type of clockevents_notify() to integerPreeti U Murthy1-3/+3
The broadcast framework can potentially be made use of by archs which do not have an external clock device as well. Then, it is required that one of the CPUs need to handle the broadcasting of wakeup IPIs to the CPUs in deep idle. As a result its local timers should remain functional all the time. For such a CPU, the BROADCAST_ENTER notification has to fail indicating that its clock device cannot be shutdown. To make way for this support, change the return type of tick_broadcast_oneshot_control() and hence clockevents_notify() to indicate such scenarios. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: deepthi@linux.vnet.ibm.com Cc: paulmck@linux.vnet.ibm.com Cc: fweisbec@gmail.com Cc: paulus@samba.org Cc: srivatsa.bhat@linux.vnet.ibm.com Cc: svaidy@linux.vnet.ibm.com Cc: peterz@infradead.org Cc: benh@kernel.crashing.org Cc: rafael.j.wysocki@intel.com Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20140207080606.17187.78306.stgit@preeti.in.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-10-02clockchips: Add FEAT_PERCPU clockevent flagSoren Brinkmann1-0/+1
Add the flag CLOCK_EVT_FEAT_PERCPU which is supposed to be set for per cpu clockevent devices. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
2013-05-16clockevents: Implement unbind functionalityThomas Gleixner1-0/+1
Provide a sysfs interface to allow unbinding of clockevent devices. The device is unbound if it is unused or if there is a replacement device available. Unbinding of broadcast devices is not supported as we don't want to foster that nonsense. If no replacement device is available the unbind returns -EBUSY. Unbind is available from the kernel and through sysfs, which is necessary to drop the module refcount. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130425143436.499216659@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-16clockevents: Add module refcountThomas Gleixner1-0/+3
We want to be able to remove clockevent modules as well. Add a refcount so we don't remove a module with an active clock event device. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130425143436.307435149@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-16clockevents: Get rid of the notifier chainThomas Gleixner1-1/+0
7+ years and still a single user. Kill it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130425143436.098520211@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-01Merge tag 'pm+acpi-3.10-rc1' of ↵Linus Torvalds1-16/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
2013-04-01timer: move enum definition out of ifdef sectionDaniel Lezcano1-16/+16
The next patch will setup automatically the broadcast timer for the different cpuidle driver when one idle state stops its timer. This will be part of the generic code. But some ARM boards, like s3c64xx, uses cpuidle but without the CONFIG_GENERIC_CLOCKEVENTS_BUILD set. Hence the cpuidle framework will be compiled with the code supposed to be generic, that is with clockevents_notify and the different enum. Also the function clockevents_notify is a noop macro, this is fine except the usual code is: int cpu = smp_processor_id(); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); and that raises a warning for the variable cpu which is not used. Move the clock_event_nofitiers enum definition out of the CONFIG_GENERIC_CLOCKEVENTS_BUILD section to prevent a compilation error when these are used in the code. Change the clockevents_notify macro to a static inline noop function to prevent a compilation warning. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-22clockevents: Add missing tick_check_broadcast_expired() for CLOCKEVENTS=nThomas Gleixner1-0/+1
Fengs build robot reports: arch/arm/kernel/process.c: In function 'cpu_idle': arch/arm/kernel/process.c:211:4: error: implicit declaration of function 'tick_check_broadcast_expired' [-Werror=implicit-function-declaration] Add the missing inline function for non clockevent builds Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-03-13tick: Provide a check for a forced broadcast pendingThomas Gleixner1-0/+6
On the CPU which gets woken along with the target CPU of the broadcast the following happens: deep_idle() <-- spurious wakeup broadcast_exit() set forced bit enable interrupts <-- Nothing happens disable interrupts broadcast_enter() <-- Here we observe the forced bit is set deep_idle() Now after that the target CPU of the broadcast runs the broadcast handler and finds the other CPU in both the broadcast and the forced mask, sends the IPI and stuff gets back to normal. So it's not actually harmful, just more evidence for the theory, that hardware designers have access to very special drug supplies. Now there is no point in going back to deep idle just to wake up again right away via an IPI. Provide a check which allows the idle code to avoid the deep idle transition. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: LAK <linux-arm-kernel@lists.infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Arjan van de Veen <arjan@infradead.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Jason Liu <liu.h.jason@gmail.com> Link: http://lkml.kernel.org/r/20130306111537.565418308@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-03-07tick: Dynamically set broadcast irq affinityDaniel Lezcano1-0/+5
When a cpu goes to a deep idle state where its local timer is shutdown, it notifies the time frame work to use the broadcast timer instead. Unfortunately, the broadcast device could wake up any CPU, including an idle one which is not concerned by the wake up at all. So in the worst case an idle CPU will wake up to send an IPI to the CPU whose timer expired. Provide an opt-in feature CLOCK_EVT_FEAT_DYNIRQ which tells the core that is should set the interrupt affinity of the broadcast interrupt to the cpu which has the earliest expiry time. This avoids unnecessary spurious wakeups and IPIs. [ tglx: Adopted to cpumask rework, silenced an uninitialized warning, massaged changelog ] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: viresh.kumar@linaro.org Cc: jacob.jun.pan@linux.intel.com Cc: linux-arm-kernel@lists.infradead.org Cc: santosh.shilimkar@ti.com Cc: linaro-kernel@lists.linaro.org Cc: patches@linaro.org Cc: rickard.andersson@stericsson.com Cc: vincent.guittot@linaro.org Cc: linus.walleij@stericsson.com Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/1362219013-18173-3-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-01clockevents: Add generic timer broadcast functionMark Rutland1-0/+5
Currently, the timer broadcast mechanism is defined by a function pointer on struct clock_event_device. As the fundamental mechanism for broadcast is architecture-specific, this means that clock_event_device drivers cannot be shared across multiple architectures. This patch adds an (optional) architecture-specific function for timer tick broadcast, allowing drivers which may require broadcast functionality to be shared across multiple architectures. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: nico@linaro.org Cc: Will.Deacon@arm.com Cc: Marc.Zyngier@arm.com Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/1358183124-28461-3-git-send-email-mark.rutland@arm.com Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-01clockevents: Add generic timer broadcast receiverMark Rutland1-0/+4
Currently the broadcast mechanism used for timers is abstracted by a function pointer on struct clock_event_device. As the fundamental mechanism for broadcast is architecture-specific, this ties each clock_event_device driver to a single architecture, even where the driver is otherwise generic. This patch adds a standard path for the receipt of timer broadcasts, so drivers and/or architecture backends need not manage redundant lists of timers for the purpose of routing broadcast timer ticks. [tglx: Made the implementation depend on the config switch as well ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: nico@linaro.org Cc: Will.Deacon@arm.com Cc: Marc.Zyngier@arm.com Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/1358183124-28461-2-git-send-email-mark.rutland@arm.com Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-09-04timekeeping: Add suspend and resume of clock event devicesRafael J. Wysocki1-0/+8
Some clock event devices, for example such that belong to PM domains, need to be handled in a spcial way during the timekeeping suspend and resume (which takes place in the system core, or "syscore", stages of system power transitions) in analogy with clock sources. Introduce .suspend() and .resume() callbacks for clock event devices that will be executed by timekeeping_suspend/_resume(), respectively, next the the clock sources' .suspend() and .resume() callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-25clockevents: Make clockevents_config() a global symbolMagnus Damm1-0/+1
Make clockevents_config() into a global symbol to allow it to be used by compiled-in clockevent drivers. This is needed by drivers that want to update the timer frequency after registration time. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Simon Horman <horms@verge.net.au> Cc: arnd@arndb.de Cc: johnstul@us.ibm.com Cc: rjw@sisk.pl Cc: lethal@linux-sh.org Cc: gregkh@linuxfoundation.org Cc: olof@lixom.net Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20120509143934.27521.46553.sendpatchset@w520 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-08clockevents: Add direct ktime programming functionMartin Schwidefsky1-3/+7
There is at least one architecture (s390) with a sane clockevent device that can be programmed with the equivalent of a ktime. No need to create a delta against the current time, the ktime can be used directly. A new clock device function 'set_next_ktime' is introduced that is called with the unmodified ktime for the timer if the clock event device has the CLOCK_EVT_FEAT_KTIME bit set. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: john stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20110823133142.815350967@de.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-08clockevents: Make minimum delay adjustments configurableMartin Schwidefsky1-1/+1
The automatic increase of the min_delta_ns of a clockevents device should be done in the clockevents code as the minimum delay is an attribute of the clockevents device. In addition not all architectures want the automatic adjustment, on a massively virtualized system it can happen that the programming of a clock event fails several times in a row because the virtual cpu has been rescheduled quickly enough. In that case the minimum delay will erroneously be increased with no way back. The new config symbol GENERIC_CLOCKEVENTS_MIN_ADJUST is used to enable the automatic adjustment. The config option is selected only for x86. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: john stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20110823133142.494157493@de.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-19clockevents: Provide interface to reconfigure an active clock event deviceThomas Gleixner1-0/+2
Some ARM SoCs have clock event devices which have their frequency modified due to frequency scaling. Provide an interface which allows to reconfigure an active device. After reconfiguration reprogram the current pending event. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: LAK <linux-arm-kernel@lists.infradead.org> Cc: John Stultz <john.stultz@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ingo Molnar <mingo@elte.hu> Link: http://lkml.kernel.org/r/%3C20110518210136.437459958%40linutronix.de%3E
2011-05-19clockevents: Provide combined configure and register functionThomas Gleixner1-0/+9
All clockevent devices have the same open coded initialization functions. Provide an interface which does all necessary initialization in the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Reviewed-by: Ingo Molnar <mingo@elte.hu> Link: http://lkml.kernel.org/r/%3C20110518210136.331975870%40linutronix.de%3E
2011-05-19clockevents: Restructure clock_event_device membersThomas Gleixner1-22/+23
Group the hot path members of struct clock_event_device together so we have a better cache line footprint. Make it cacheline aligned. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Reviewed-by: Ingo Molnar <mingo@elte.hu> Link: http://lkml.kernel.org/r/%3C20110518210136.223607682%40linutronix.de%3E
2010-03-12clockevents: Sanitize min_delta_ns adjustment and prevent overflowsThomas Gleixner1-0/+2
The current logic which handles clock events programming failures can increase min_delta_ns unlimited and even can cause overflows. Sanitize it by: - prevent zero increase when min_delta_ns == 1 - limiting min_delta_ns to a jiffie - bail out if the jiffie limit is hit - add retries stats for /proc/timer_list so we can gather data Reported-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-11-13nohz: Allow 32-bit machines to sleep for more than 2.15 secondsJon Hunter1-4/+4
In the dynamic tick code, "max_delta_ns" (member of the "clock_event_device" structure) represents the maximum sleep time that can occur between timer events in nanoseconds. The variable, "max_delta_ns", is defined as an unsigned long which is a 32-bit integer for 32-bit machines and a 64-bit integer for 64-bit machines (if -m64 option is used for gcc). The value of max_delta_ns is set by calling the function "clockevent_delta2ns()" which returns a maximum value of LONG_MAX. For a 32-bit machine LONG_MAX is equal to 0x7fffffff and in nanoseconds this equates to ~2.15 seconds. Hence, the maximum sleep time for a 32-bit machine is ~2.15 seconds, where as for a 64-bit machine it will be many years. This patch changes the type of max_delta_ns to be "u64" instead of "unsigned long" so that this variable is a 64-bit type for both 32-bit and 64-bit machines. It also changes the maximum value returned by clockevent_delta2ns() to KTIME_MAX. Hence this allows a 32-bit machine to sleep for longer than ~2.15 seconds. Please note that this patch also changes "min_delta_ns" to be "u64" too and although this is unnecessary, it makes the patch simpler as it avoids to fixup all callers of clockevent_delta2ns(). [ tglx: changed "unsigned long long" to u64 as we use this data type through out the time code ] Signed-off-by: Jon Hunter <jon-hunter@ti.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <1250617512-23567-3-git-send-email-jon-hunter@ti.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-11-13clocksource: Provide a generic mult/shift factor calculationThomas Gleixner1-0/+7
MIPS has two functions to calculcate the mult/shift factors for clock sources and clock events at run time. ARM needs such functions as well. Implement a function which calculates the mult/shift factors based on the frequencies to which and from which is converted. The function also has a parameter to specify the minimum conversion range in seconds. This range is guaranteed not to produce a 64bit overflow when a value is multiplied with the calculated mult factor. The larger the conversion range the less becomes the conversion accuracy. Provide two inline wrappers which handle clock events and clock sources. For clock events the "from" frequency is nano seconds per second which corresponds to 1GHz and "to" is the device frequency. For clock sources "from" is the device frequency and "to" is nano seconds per second. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20091111134229.766673305@linutronix.de>
2009-11-13clockevents: Use u32 for mult and shift factorsThomas Gleixner1-2/+2
The mult and shift factors of clock events differ in their data type from those of clock sources for no reason. u32 is sufficient for both. shift is always <= 32 and mult is limited to 2^32-1 to avoid 64bit multiplication overflows in the conversion. Preparatory patch for a generic mult/shift factor calculation function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20091111134229.725664788@linutronix.de>