summaryrefslogtreecommitdiff
path: root/include/linux/f2fs_fs.h
AgeCommit message (Collapse)AuthorFilesLines
2017-05-03f2fs: introduce CP_TRIMMED_FLAG to avoid unneeded discardChao Yu1-0/+1
Introduce CP_TRIMMED_FLAG to indicate all invalid block were trimmed before umount, so once we do mount with image which contain the flag, we don't record invalid blocks as undiscard one, when fstrim is being triggered, we can avoid issuing redundant discard commands. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-05-03f2fs: sanity check segment countJin Qian1-0/+6
F2FS uses 4 bytes to represent block address. As a result, supported size of disk is 16 TB and it equals to 16 * 1024 * 1024 / 2 segments. Signed-off-by: Jin Qian <jinqian@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-04-24f2fs: add parentheses for macro variables moreJaegeuk Kim1-5/+5
This patch adds parentheses for macro variables more in include/linux/f2fs_fs.h. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-27f2fs: introduce free nid bitmapChao Yu1-0/+1
In scenario of intensively node allocation, free nids will be ran out soon, then it needs to stop to load free nids by traversing NAT blocks, in worse case, if NAT blocks does not be cached in memory, it generates IOs which slows down our foreground operations. In order to speed up node allocation, in this patch we introduce a new free_nid_bitmap array, so there is an bitmap table for each NAT block, Once the NAT block is loaded, related bitmap cache will be switched on, and bitmap will be set during traversing nat entries in NAT block, later we can query and update nid usage status in memory completely. With such implementation, I expect performance of node allocation can be improved in the long-term after filesystem image is mounted. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-27f2fs: add bitmaps for empty or full NAT blocksJaegeuk Kim1-0/+1
This patches adds bitmaps to represent empty or full NAT blocks containing free nid entries. If we can find valid crc|cp_ver in the last block of checkpoint pack, we'll use these bitmaps when building free nids. In order to avoid checkpointing burden, up-to-date bitmaps will be flushed only during umount time. So, normally we can get this gain, but when power-cut happens, we rely on fsck.f2fs which recovers this bitmap again. After this patch, we build free nids from nid #0 at mount time to make more full NAT blocks, but in runtime, we check empty NAT blocks to load free nids without loading any NAT pages from disk. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29f2fs: support IO alignment for DATA and NODE writesJaegeuk Kim1-0/+6
This patch implements IO alignment by filling dummy blocks in DATA and NODE write bios. If we can guarantee, for example, 32KB or 64KB for such the IOs, we can eliminate underlying dummy page problem which FTL conducts in order to close MLC or TLC partial written pages. Note that, - it requires "-o mode=lfs". - IO size should be power of 2, not exceed BIO_MAX_PAGES, 256. - read IO is still 4KB. - do checkpoint at fsync, if dummy NODE page was written. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-25f2fs: support multiple devicesJaegeuk Kim1-1/+9
This patch implements multiple devices support for f2fs. Given multiple devices by mkfs.f2fs, f2fs shows them entirely as one big volume under one f2fs instance. Internal block management is very simple, but we will modify block allocation and background GC policy to boost IO speed by exploiting them accoording to each device speed. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-30f2fs: use crc and cp version to determine roll-forward recoveryJaegeuk Kim1-0/+1
Previously, we used cp_version only to detect recoverable dnodes. In order to avoid same garbage cp_version, we needed to truncate the next dnode during checkpoint, resulting in additional discard or data write. If we can distinguish this by using crc in addition to cp_version, we can remove this overhead. There is backward compatibility concern where it changes node_footer layout. So, this patch introduces a new checkpoint flag, CP_CRC_RECOVERY_FLAG, to detect new layout. New layout will be activated only when this flag is set. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-15f2fs: fix to convert inline directory correctlyChao Yu1-0/+2
With below serials, we will lose parts of dirents: 1) mount f2fs with inline_dentry option 2) echo 1 > /sys/fs/f2fs/sdX/dir_level 3) mkdir dir 4) touch 180 files named [1-180] in dir 5) touch 181 in dir 6) echo 3 > /proc/sys/vm/drop_caches 7) ll dir ls: cannot access 2: No such file or directory ls: cannot access 4: No such file or directory ls: cannot access 5: No such file or directory ls: cannot access 6: No such file or directory ls: cannot access 8: No such file or directory ls: cannot access 9: No such file or directory ... total 360 drwxr-xr-x 2 root root 4096 Feb 19 15:12 ./ drwxr-xr-x 3 root root 4096 Feb 19 15:11 ../ -rw-r--r-- 1 root root 0 Feb 19 15:12 1 -rw-r--r-- 1 root root 0 Feb 19 15:12 10 -rw-r--r-- 1 root root 0 Feb 19 15:12 100 -????????? ? ? ? ? ? 101 -????????? ? ? ? ? ? 102 -????????? ? ? ? ? ? 103 ... The reason is: when doing the inline dir conversion, we didn't consider that directory has hierarchical hash structure which can be configured through sysfs interface 'dir_level'. By default, dir_level of directory inode is 0, it means we have one bucket in hash table located in first level, all dirents will be hashed in this bucket, so it has no problem for us to do the duplication simply between inline dentry page and converted normal dentry page. However, if we configured dir_level with the value N (greater than 0), it will expand the bucket number of first level hash table by 2^N - 1, it hashs dirents into different buckets according their hash value, if we still move all dirents to first bucket, it makes incorrent locating for inline dirents, the result is, although we can iterate all dirents through ->readdir, we can't stat some of them in ->lookup which based on hash table searching. This patch fixes this issue by rehashing dirents into correct position when converting inline directory. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-2/+2
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-23f2fs: introduce f2fs_journal struct to wrap journal infoChao Yu1-3/+7
Introduce a new structure f2fs_journal to wrap journal info in struct f2fs_summary_block for readability. struct f2fs_journal { union { __le16 n_nats; __le16 n_sits; }; union { struct nat_journal nat_j; struct sit_journal sit_j; struct f2fs_extra_info info; }; } __packed; struct f2fs_summary_block { struct f2fs_summary entries[ENTRIES_IN_SUM]; struct f2fs_journal journal; struct summary_footer footer; } __packed; Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-23f2fs: preallocate blocks for buffered aio writesJaegeuk Kim1-1/+1
This patch preallocates data blocks for buffered aio writes. With this patch, we can avoid redundant locking and unlocking of node pages given consecutive aio request. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-23f2fs: fix endianness of on-disk summary_footerSheng Yong1-1/+1
Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-23f2fs: remove unneeded pointer conversionChao Yu1-3/+3
There are redundant pointer conversion in following call stack: - at position a, inode was been converted to f2fs_file_info. - at position b, f2fs_file_info was been converted to inode again. - truncate_blocks(inode,..) - fi = F2FS_I(inode) ---a - ADDRS_PER_PAGE(node_page, fi) - addrs_per_inode(fi) - inode = &fi->vfs_inode ---b - f2fs_has_inline_xattr(inode) - fi = F2FS_I(inode) - is_inode_flag_set(fi,..) In order to avoid unneeded conversion, alter ADDRS_PER_PAGE and addrs_per_inode to acept parameter with type of inode pointer. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-23f2fs: introduce lifetime write IO statisticsShuoran Liu1-1/+13
This patch introduces lifetime IO write statistics exposed to the sysfs interface. The write IO amount is obtained from block layer, accumulated in the file system and stored in the hot node summary of checkpoint. Signed-off-by: Shuoran Liu <liushuoran@huawei.com> Signed-off-by: Pengyang Hou <houpengyang@huawei.com> [Jaegeuk Kim: add sysfs documentation] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-12-15f2fs: add symbol to avoid any confusion with toolsJaegeuk Kim1-1/+2
This patch adds MAX_VOLUME_NAME to sync with f2fs-tools. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-22f2fs: add annotation for space utilization of regular/inline dentryChao Yu1-3/+13
Add annotation to let us know more clearly about space utilization information of regular dentry and inline dentry. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-05-29f2fs crypto: declare some definitions for f2fs encryption featureJaegeuk Kim1-1/+3
This definitions will be used by inode and superblock for encyption. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-05-29f2fs: add feature facility in superblockJaegeuk Kim1-1/+2
This patch introduces a feature in superblock, which will indicate any new features for f2fs. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-05-29f2fs: add missing version info in superblockJaegeuk Kim1-0/+5
The mkfs.f2fs remains kernel version in superblock, but f2fs module has not added that so far. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-04-11f2fs: add F2FS_INLINE_DOTS to recover missing dot dentriesJaegeuk Kim1-0/+1
If f2fs was corrupted with missing dot dentries, it needs to recover them after fsck.f2fs detection. The underlying precedure is: 1. The fsck.f2fs remains F2FS_INLINE_DOTS flag in directory inode, if it detects missing dot dentries. 2. When f2fs looks up the corrupted directory, it triggers f2fs_add_link with proper inode numbers and their dot and dotdot names. 3. Once f2fs recovers the directory without errors, it removes F2FS_INLINE_DOTS finally. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-03f2fs: simplfy a field name in struct f2fs_extent,extent_infoChao Yu1-1/+1
Rename a filed name from 'blk_addr' to 'blk' in struct {f2fs_extent,extent_info} as annotation of this field descripts its meaning well to us. By this way, we can avoid long statement in code of following patches. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-02-12f2fs: introduce macros to convert bytes and blocks in f2fsJaegeuk Kim1-0/+4
This patch adds two macros for transition between byte and block offsets. Currently, f2fs only supports 4KB blocks, so use the default size for now. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-02-12f2fs: split UMOUNT and FASTBOOT flagsJaegeuk Kim1-0/+1
This patch adds FASTBOOT flag into checkpoint as follows. - CP_UMOUNT_FLAG is set when system is umounted. - CP_FASTBOOT_FLAG is set when intermediate checkpoint having node summaries was done. So, if you get CP_UMOUNT_FLAG from checkpoint, the system was umounted cleanly. Instead, if there was sudden-power-off, you can get CP_FASTBOOT_FLAG or nothing. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-01-10f2fs: fix missing cold bit during recoveryJaegeuk Kim1-0/+2
In do_recover_data, we find and update previous node pages after updating its new block addresses. After then, we call fill_node_footer without reset field, we erase its cold bit so that this new cold node block is written to wrong log area. This patch fixes not to miss its old flag. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-05f2fs: remove unnecessary macroJaegeuk Kim1-4/+0
Let's remove unused macro. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-05f2fs: revisit inline_data to avoid data races and potential bugsJaegeuk Kim1-0/+1
This patch simplifies the inline_data usage with the following rule. 1. inline_data is set during the file creation. 2. If new data is requested to be written ranges out of inline_data, f2fs converts that inode permanently. 3. There is no cases which converts non-inline_data inode to inline_data. 4. The inline_data flag should be changed under inode page lock. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-04f2fs: add infra struct and helper for inline dirChao Yu1-0/+19
This patch defines macro/inline dentry structure, and adds some helpers for inline dir infrastructure. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-04f2fs: use highmem for directory pagesJaegeuk Kim1-1/+2
This patch fixes to use highmem for directory pages. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-23f2fs: support large sector sizeChao Yu1-2/+3
Block size in f2fs is 4096 bytes, so theoretically, f2fs can support 4096 bytes sector device at maximum. But now f2fs only support 512 bytes size sector, so block device such as zRAM which uses page cache as its block storage space will not be mounted successfully as mismatch between sector size of zRAM and sector size of f2fs supported. In this patch we support large sector size in f2fs, so block device with sector size of 512/1024/2048/4096 bytes can be supported in f2fs. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-10f2fs: retain inconsistency information to initiate fsck.f2fsJaegeuk Kim1-0/+1
This patch adds sbi->need_fsck to conduct fsck.f2fs later. This flag can only be removed by fsck.f2fs. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-23f2fs: use macro for code readabilityChao Yu1-3/+10
This patch introduces DEF_NIDS_PER_INODE/GET_ORPHAN_BLOCKS/F2FS_CP_PACKS macro instead of numbers in code for readability. change log from v1: o fix typo pointed out by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-22f2fs: fix incorrect calculation with total/free inode numChao Yu1-0/+3
Theoretically, our total inodes number is the same as total node number, but there are three node ids are reserved in f2fs, they are 0, 1 (node nid), and 2 (meta nid), and they should never be used by user, so our total/free inode number calculated in ->statfs is wrong. This patch indroduces F2FS_RESERVED_NODE_NUM and then fixes this issue by recalculating total/free inode number with the macro. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-04f2fs: large volume supportChangman Lee1-0/+2
f2fs's cp has one page which consists of struct f2fs_checkpoint and version bitmap of sit and nat. To support lots of segments, we need more blocks for sit bitmap. So let's arrange sit bitmap as following: +-----------------+------------+ | f2fs_checkpoint | sit bitmap | | + nat bitmap | | +-----------------+------------+ 0 4k N blocks Signed-off-by: Changman Lee <cm224.lee@samsung.com> [Jaegeuk Kim: simple code change for readability] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-04f2fs: avoid overflow when large directory feathure is enabledChao Yu1-0/+3
When large directory feathure is enable, We have one case which could cause overflow in dir_buckets() as following: special case: level + dir_level >= 32 and level < MAX_DIR_HASH_DEPTH / 2. Here we define MAX_DIR_BUCKETS to limit the return value when the condition could trigger potential overflow. Changes from V1 o modify description of calculation in f2fs.txt suggested by Changman Lee. Suggested-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-05-07f2fs: introduce help macro ADDRS_PER_PAGE()Chao Yu1-0/+3
Introduce help macro ADDRS_PER_PAGE() to get the number of address pointers in direct node or inode. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-27f2fs: introduce large directory supportJaegeuk Kim1-1/+1
This patch introduces an i_dir_level field to support large directory. Previously, f2fs maintains multi-level hash tables to find a dentry quickly from a bunch of chiild dentries in a directory, and the hash tables consist of the following tree structure as below. In Documentation/filesystems/f2fs.txt, ---------------------- A : bucket B : block N : MAX_DIR_HASH_DEPTH ---------------------- level #0 | A(2B) | level #1 | A(2B) - A(2B) | level #2 | A(2B) - A(2B) - A(2B) - A(2B) . | . . . . level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) But, if we can guess that a directory will handle a number of child files, we don't need to traverse the tree from level #0 to #N all the time. Since the lower level tables contain relatively small number of dentries, the miss ratio of the target dentry is likely to be high. In order to avoid that, we can configure the hash tables sparsely from level #0 like this. level #0 | A(2B) - A(2B) - A(2B) - A(2B) level #1 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) With this structure, we can skip the ineffective tree searches in lower level hash tables. This patch adds just a facility for this by introducing i_dir_level in f2fs_inode. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06f2fs: add inline_data recovery routineJaegeuk Kim1-2/+1
This patch adds a inline_data recovery routine with the following policy. [prev.] [next] of inline_data flag o o -> recover inline_data o x -> remove inline_data, and then recover data blocks x o -> remove inline_data, and then recover inline_data x x -> recover data blocks Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: add flags and helpers to support inline dataHuajun Li1-0/+8
Add new inode flags F2FS_INLINE_DATA and FI_INLINE_DATA to indicate whether the inode has inline data. Inline data makes use of inode block's data indices region to save small file. Currently there are 923 data indices in an inode block. Since inline xattr has made use of the last 50 indices to save its data, there are 873 indices left which can be used for inline data. When FI_INLINE_DATA is set, the layout of inode block's indices region is like below: +-----------------+ | | Reserved. reserve_new_block() will make use of | i_addr[0] | i_addr[0] when we need to reserve a new data block | | to convert inline data into regular one's. |-----------------| | | Used by inline data. A file whose size is less than | i_addr[1~872] | 3488 bytes(~3.4k) and doesn't reserve extra | | blocks by fallocate() can be saved here. |-----------------| | | | i_addr[873~922] | Reserved for inline xattr | | +-----------------+ Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Weihong Xu <weihong.xu@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-26f2fs: support the inline xattrsJaegeuk Kim1-1/+1
0. modified inode structure -------------------------------------- metadata (e.g., i_mtime, i_ctime, etc) -------------------------------------- direct pointers [0 ~ 873] inline xattrs (200 bytes by default) indirect pointers [0 ~ 4] -------------------------------------- node footer -------------------------------------- 1. setxattr flow - read_all_xattrs copies all the xattrs from inline and xattr node block. - handle xattr entries - write_all_xattrs copies modified xattrs into inline and xattr node block. 2. getxattr flow - read_all_xattrs copies all the xattrs from inline and xattr node block. - check target entries 3. Usage # mount -t f2fs -o inline_xattr $DEV $MNT Once mounted with the inline_xattr option, f2fs marks all the newly created files to reserve an amount of inline xattr space explicitly inside the inode block. Without the mount option, f2fs will not touch any existing files and newly created files as well. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-26f2fs: reserve the xattr space dynamicallyJaegeuk Kim1-4/+12
This patch enables the number of direct pointers inside on-disk inode block to be changed dynamically according to the size of inline xattr space. The number of direct pointers, ADDRS_PER_INODE, can be changed only if the file has inline xattr flag. The number of direct pointers that will be used by inline xattrs is defined as F2FS_INLINE_XATTR_ADDRS. Current patch assigns F2FS_INLINE_XATTR_ADDRS to 0 temporarily. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-26f2fs: add flags for inline xattrsJaegeuk Kim1-1/+3
This patch adds basic inode flags for inline xattrs, F2FS_INLINE_XATTR, and add a mount option, inline_xattr, which is enabled when xattr is set. If the mount option is enabled, all the files are marked with the inline_xattrs flag. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28f2fs: align data types between on-disk and in-memory block addressesJaegeuk Kim1-2/+2
The on-disk block address is defined as __le32, but in-memory block address, block_t, does as u64. Let's synchronize them to 32 bits. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-18f2fs: align f2fs maximum name length to linux based filesystemJaegeuk Kim1-8/+9
The maximum filename length supported in linux is 255 characters. So let's follow that. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11f2fs: introduce accessor to retrieve number of dentry slotsNamjae Jeon1-0/+3
Simplify code by providing the accessor macro to retrieve the number of dentry slots for a given filename length. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11f2fs: fix endian conversion bugs reported by sparseJaegeuk Kim1-3/+3
This patch should resolve the bugs reported by the sparse tool. Initial reports were written by "kbuild test robot" managed by fengguang.wu. In my local machines, I've tested also by running: > make C=2 CF="-D__CHECK_ENDIAN__" Accordingly, I've found lots of warnings and bugs related to the endian conversion. And I've fixed all at this moment. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11f2fs: add on-disk layoutJaegeuk Kim1-0/+410
This adds a header file describing the on-disk layout of f2fs. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Chul Lee <chur.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>