summaryrefslogtreecommitdiff
path: root/include/linux/genhd.h
AgeCommit message (Collapse)AuthorFilesLines
2019-04-22block: fix use-after-free on gendiskYufen Yu1-0/+1
commit 2da78092dda "block: Fix dev_t minor allocation lifetime" specifically moved blk_free_devt(dev->devt) call to part_release() to avoid reallocating device number before the device is fully shutdown. However, it can cause use-after-free on gendisk in get_gendisk(). We use md device as example to show the race scenes: Process1 Worker Process2 md_free blkdev_open del_gendisk add delete_partition_work_fn() to wq __blkdev_get get_gendisk put_disk disk_release kfree(disk) find part from ext_devt_idr get_disk_and_module(disk) cause use after free delete_partition_work_fn put_device(part) part_release remove part from ext_devt_idr Before <devt, hd_struct pointer> is removed from ext_devt_idr by delete_partition_work_fn(), we can find the devt and then access gendisk by hd_struct pointer. But, if we access the gendisk after it have been freed, it can cause in use-after-freeon gendisk in get_gendisk(). We fix this by adding a new helper blk_invalidate_devt() in delete_partition() and del_gendisk(). It replaces hd_struct pointer in idr with value 'NULL', and deletes the entry from idr in part_release() as we do now. Thanks to Jan Kara for providing the solution and more clear comments for the code. Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime") Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: disk_events: introduce event flagsMartin Wilck1-1/+9
Currently, an empty disk->events field tells the block layer not to forward media change events to user space. This was done in commit 7c88a168da80 ("block: don't propagate unlisted DISK_EVENTs to userland") in order to avoid events from "fringe" drivers to be forwarded to user space. By doing so, the block layer lost the information which events were supported by a particular block device, and most importantly, whether or not a given device supports media change events at all. Prepare for not interpreting the "events" field this way in the future any more. This is done by adding an additional field "event_flags" to struct gendisk, and two flag bits that can be set to have the device treated like one that had the "events" field set to a non-zero value before. This applies only to the sd and sr drivers, which are changed to set the new flags. The new flags are DISK_EVENT_FLAG_POLL to enforce polling of the device for synchronous events, and DISK_EVENT_FLAG_UEVENT to tell the blocklayer to generate udev events from kernel events. In order to add the event_flags field to struct gendisk, the events field is converted to an "unsigned short"; it doesn't need to hold values bigger than 2 anyway. This patch doesn't change behavior. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: genhd: remove async_events fieldMartin Wilck1-1/+0
The async_events field, intended to be used for drivers that support asynchronous notifications about disk events (aka media change events), isn't currently used by any driver, and apparently that has been that way for a long time (if not forever). Remove it. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: remove CONFIG_LBDAFChristoph Hellwig1-4/+4
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit architectures. These types are required to support block device and/or file sizes larger than 2 TiB, and have generally defaulted to on for a long time. Enabling the option only increases the i386 tinyconfig size by 145 bytes, and many data structures already always use 64-bit values for their in-core and on-disk data structures anyway, so there should not be a large change in dynamic memory usage either. Dropping this option removes a somewhat weird non-default config that has cause various bugs or compiler warnings when actually used. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: return just one value from part_in_flightMikulas Patocka1-2/+1
The previous patches deleted all the code that needed the second value returned from part_in_flight - now the kernel only uses the first value. Consequently, part_in_flight (and blk_mq_in_flight) may be changed so that it only returns one value. This patch just refactors the code, there's no functional change. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: switch to per-cpu in-flight countersMikulas Patocka1-7/+22
Now when part_round_stats is gone, we can switch to per-cpu in-flight counters. We use the local-atomic type local_t, so that if part_inc_in_flight or part_dec_in_flight is reentrantly called from an interrupt, the value will be correct. The other counters could be corrupted due to reentrant interrupt, but the corruption only results in slight counter skew - the in_flight counter must be exact, so it needs local_t. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: delete part_round_stats and switch to less precise countingMikulas Patocka1-2/+1
We want to convert to per-cpu in_flight counters. The function part_round_stats needs the in_flight counter every jiffy, it would be too costly to sum all the percpu variables every jiffy, so it must be deleted. part_round_stats is used to calculate two counters - time_in_queue and io_ticks. time_in_queue can be calculated without part_round_stats, by adding the duration of the I/O when the I/O ends (the value is almost as exact as the previously calculated value, except that time for in-progress I/Os is not counted). io_ticks can be approximated by increasing the value when I/O is started or ended and the jiffies value has changed. If the I/Os take less than a jiffy, the value is as exact as the previously calculated value. If the I/Os take more than a jiffy, io_ticks can drift behind the previously calculated value. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: stop passing 'cpu' to all percpu stats methodsMike Snitzer1-13/+13
All of part_stat_* and related methods are used with preempt disabled, so there is no need to pass cpu around to allow of them. Just call smp_processor_id() as needed. Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-28block: use rcu_work instead of call_rcu to avoid sleep in softirqYufen Yu1-1/+1
We recently got a stack by syzkaller like this: BUG: sleeping function called from invalid context at mm/slab.h:361 in_atomic(): 1, irqs_disabled(): 0, pid: 6644, name: blkid INFO: lockdep is turned off. CPU: 1 PID: 6644 Comm: blkid Not tainted 4.4.163-514.55.6.9.x86_64+ #76 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 0000000000000000 5ba6a6b879e50c00 ffff8801f6b07b10 ffffffff81cb2194 0000000041b58ab3 ffffffff833c7745 ffffffff81cb2080 5ba6a6b879e50c00 0000000000000000 0000000000000001 0000000000000004 0000000000000000 Call Trace: <IRQ> [<ffffffff81cb2194>] __dump_stack lib/dump_stack.c:15 [inline] <IRQ> [<ffffffff81cb2194>] dump_stack+0x114/0x1a0 lib/dump_stack.c:51 [<ffffffff8129a981>] ___might_sleep+0x291/0x490 kernel/sched/core.c:7675 [<ffffffff8129ac33>] __might_sleep+0xb3/0x270 kernel/sched/core.c:7637 [<ffffffff81794c13>] slab_pre_alloc_hook mm/slab.h:361 [inline] [<ffffffff81794c13>] slab_alloc_node mm/slub.c:2610 [inline] [<ffffffff81794c13>] slab_alloc mm/slub.c:2692 [inline] [<ffffffff81794c13>] kmem_cache_alloc_trace+0x2c3/0x5c0 mm/slub.c:2709 [<ffffffff81cbe9a7>] kmalloc include/linux/slab.h:479 [inline] [<ffffffff81cbe9a7>] kzalloc include/linux/slab.h:623 [inline] [<ffffffff81cbe9a7>] kobject_uevent_env+0x2c7/0x1150 lib/kobject_uevent.c:227 [<ffffffff81cbf84f>] kobject_uevent+0x1f/0x30 lib/kobject_uevent.c:374 [<ffffffff81cbb5b9>] kobject_cleanup lib/kobject.c:633 [inline] [<ffffffff81cbb5b9>] kobject_release+0x229/0x440 lib/kobject.c:675 [<ffffffff81cbb0a2>] kref_sub include/linux/kref.h:73 [inline] [<ffffffff81cbb0a2>] kref_put include/linux/kref.h:98 [inline] [<ffffffff81cbb0a2>] kobject_put+0x72/0xd0 lib/kobject.c:692 [<ffffffff8216f095>] put_device+0x25/0x30 drivers/base/core.c:1237 [<ffffffff81c4cc34>] delete_partition_rcu_cb+0x1d4/0x2f0 block/partition-generic.c:232 [<ffffffff813c08bc>] __rcu_reclaim kernel/rcu/rcu.h:118 [inline] [<ffffffff813c08bc>] rcu_do_batch kernel/rcu/tree.c:2705 [inline] [<ffffffff813c08bc>] invoke_rcu_callbacks kernel/rcu/tree.c:2973 [inline] [<ffffffff813c08bc>] __rcu_process_callbacks kernel/rcu/tree.c:2940 [inline] [<ffffffff813c08bc>] rcu_process_callbacks+0x59c/0x1c70 kernel/rcu/tree.c:2957 [<ffffffff8120f509>] __do_softirq+0x299/0xe20 kernel/softirq.c:273 [<ffffffff81210496>] invoke_softirq kernel/softirq.c:350 [inline] [<ffffffff81210496>] irq_exit+0x216/0x2c0 kernel/softirq.c:391 [<ffffffff82c2cd7b>] exiting_irq arch/x86/include/asm/apic.h:652 [inline] [<ffffffff82c2cd7b>] smp_apic_timer_interrupt+0x8b/0xc0 arch/x86/kernel/apic/apic.c:926 [<ffffffff82c2bc25>] apic_timer_interrupt+0xa5/0xb0 arch/x86/entry/entry_64.S:746 <EOI> [<ffffffff814cbf40>] ? audit_kill_trees+0x180/0x180 [<ffffffff8187d2f7>] fd_install+0x57/0x80 fs/file.c:626 [<ffffffff8180989e>] do_sys_open+0x45e/0x550 fs/open.c:1043 [<ffffffff818099c2>] SYSC_open fs/open.c:1055 [inline] [<ffffffff818099c2>] SyS_open+0x32/0x40 fs/open.c:1050 [<ffffffff82c299e1>] entry_SYSCALL_64_fastpath+0x1e/0x9a In softirq context, we call rcu callback function delete_partition_rcu_cb(), which may allocate memory by kzalloc with GFP_KERNEL flag. If the allocation cannot be satisfied, it may sleep. However, That is not allowed in softirq contex. Although we found this problem on linux 4.4, the latest kernel version seems to have this problem as well. And it is very similar to the previous one: https://lkml.org/lkml/2018/7/9/391 Fix it by using RCU workqueue, which allows sleep. Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-01Merge tag 'v4.19-rc6' into for-4.20/blockJens Axboe1-1/+4
Merge -rc6 in, for two reasons: 1) Resolve a trivial conflict in the blk-mq-tag.c documentation 2) A few important regression fixes went into upstream directly, so they aren't in the 4.20 branch. Signed-off-by: Jens Axboe <axboe@kernel.dk> * tag 'v4.19-rc6': (780 commits) Linux 4.19-rc6 MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c cpufreq: qcom-kryo: Fix section annotations perf/core: Add sanity check to deal with pinned event failure xen/blkfront: correct purging of persistent grants Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" selftests/powerpc: Fix Makefiles for headers_install change blk-mq: I/O and timer unplugs are inverted in blktrace dax: Fix deadlock in dax_lock_mapping_entry() x86/boot: Fix kexec booting failure in the SEV bit detection code bcache: add separate workqueue for journal_write to avoid deadlock drm/amd/display: Fix Edid emulation for linux drm/amd/display: Fix Vega10 lightup on S3 resume drm/amdgpu: Fix vce work queue was not cancelled when suspend Revert "drm/panel: Add device_link from panel device to DRM device" xen/blkfront: When purging persistent grants, keep them in the buffer clocksource/drivers/timer-atmel-pit: Properly handle error cases block: fix deadline elevator drain for zoned block devices ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set ... Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28block: genhd: add 'groups' argument to device_add_diskHannes Reinecke1-2/+3
Update device_add_disk() to take an 'groups' argument so that individual drivers can register a device with additional sysfs attributes. This avoids race condition the driver would otherwise have if these groups were to be created with sysfs_add_groups(). Signed-off-by: Martin Wilck <martin.wilck@suse.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-22block: use nanosecond resolution for iostatOmar Sandoval1-1/+4
Klaus Kusche reported that the I/O busy time in /proc/diskstats was not updating properly on 4.18. This is because we started using ktime to track elapsed time, and we convert nanoseconds to jiffies when we update the partition counter. However, this gets rounded down, so any I/Os that take less than a jiffy are not accounted for. Previously in this case, the value of jiffies would sometimes increment while we were doing I/O, so at least some I/Os were accounted for. Let's convert the stats to use nanoseconds internally. We still report milliseconds as before, now more accurately than ever. The value is still truncated to 32 bits for backwards compatibility. Fixes: 522a777566f5 ("block: consolidate struct request timestamp fields") Cc: stable@vger.kernel.org Reported-by: Klaus Kusche <klaus.kusche@computerix.info> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-18block: Track DISCARD statistics and output them in stat and diskstatMichael Callahan1-1/+2
Add tracking of REQ_OP_DISCARD ios to the partition statistics and append them to the various stat files in /sys as well as /proc/diskstats. These are tracked with the same four stats as reads and writes: Number of discard ios completed. Number of discard ios merged Number of discard sectors completed Milliseconds spent on discard requests This is done via adding a new STAT_DISCARD define to genhd.h and then using it to index that stat field for discard requests. tj: Refreshed on top of v4.17 and other previous updates. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andy Newell <newella@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-18block: Define and use STAT_READ and STAT_WRITEMichael Callahan1-6/+7
Add defines for STAT_READ and STAT_WRITE for indexing the partition stat entries. This clarifies some fs/ code which has hardcoded 1 for STAT_WRITE and will make it easier to extend the stats with additional fields. tj: Refreshed on top of v4.17. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-18block: Add part_stat_read_accum to read across field entries.Michael Callahan1-0/+4
Add a part_stat_read_accum macro to genhd.h to read and sum across field entries. For example to sum up the number read and write sectors completed. In addition to being ar reasonable cleanup by itself this will make it easier to add new stat fields in the future. tj: Refreshed on top of v4.17. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-26blk-mq: fix sysfs inflight counterOmar Sandoval1-1/+3
When the blk-mq inflight implementation was added, /proc/diskstats was converted to use it, but /sys/block/$dev/inflight was not. Fix it by adding another helper to count in-flight requests by data direction. Fixes: f299b7c7a9de ("blk-mq: provide internal in-flight variant") Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26genhd: Fix BUG in blkdev_open()Jan Kara1-0/+1
When two blkdev_open() calls for a partition race with device removal and recreation, we can hit BUG_ON(!bd_may_claim(bdev, whole, holder)) in blkdev_open(). The race can happen as follows: CPU0 CPU1 CPU2 del_gendisk() bdev_unhash_inode(part1); blkdev_open(part1, O_EXCL) blkdev_open(part1, O_EXCL) bdev = bd_acquire() bdev = bd_acquire() blkdev_get(bdev) bd_start_claiming(bdev) - finds old inode 'whole' bd_prepare_to_claim() -> 0 bdev_unhash_inode(whole); <device removed> <new device under same number created> blkdev_get(bdev); bd_start_claiming(bdev) - finds new inode 'whole' bd_prepare_to_claim() - this also succeeds as we have different 'whole' here... - bad things happen now as we have two exclusive openers of the same bdev The problem here is that block device opens can see various intermediate states while gendisk is shutting down and then being recreated. We fix the problem by introducing new lookup_sem in gendisk that synchronizes gendisk deletion with get_gendisk() and furthermore by making sure that get_gendisk() does not return gendisk that is being (or has been) deleted. This makes sure that once we ever manage to look up newly created bdev inode, we are also guaranteed that following get_gendisk() will either return failure (and we fail open) or it returns gendisk for the new device and following bdget_disk() will return new bdev inode (i.e., blkdev_open() follows the path as if it is completely run after new device is created). Reported-and-analyzed-by: Hou Tao <houtao1@huawei.com> Tested-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26genhd: Add helper put_disk_and_module()Jan Kara1-0/+1
Add a proper counterpart to get_disk_and_module() - put_disk_and_module(). Currently it is opencoded in several places. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26genhd: Rename get_disk() to get_disk_and_module()Jan Kara1-1/+1
Rename get_disk() to get_disk_and_module() to make sure what the function does. It's not a great name but at least it is now clear that put_disk() is not it's counterpart. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-15block: allow gendisk's request_queue registration to be deferredMike Snitzer1-0/+5
Since I can remember DM has forced the block layer to allow the allocation and initialization of the request_queue to be distinct operations. Reason for this is block/genhd.c:add_disk() has requires that the request_queue (and associated bdi) be tied to the gendisk before add_disk() is called -- because add_disk() also deals with exposing the request_queue via blk_register_queue(). DM's dynamic creation of arbitrary device types (and associated request_queue types) requires the DM device's gendisk be available so that DM table loads can establish a master/slave relationship with subordinate devices that are referenced by loaded DM tables -- using bd_link_disk_holder(). But until these DM tables, and their associated subordinate devices, are known DM cannot know what type of request_queue it needs -- nor what its queue_limits should be. This chicken and egg scenario has created all manner of problems for DM and, at times, the block layer. Summary of changes: - Add device_add_disk_no_queue_reg() and add_disk_no_queue_reg() variant that drivers may use to add a disk without also calling blk_register_queue(). Driver must call blk_register_queue() once its request_queue is fully initialized. - Return early from blk_unregister_queue() if QUEUE_FLAG_REGISTERED is not set. It won't be set if driver used add_disk_no_queue_reg() but driver encounters an error and must del_gendisk() before calling blk_register_queue(). - Export blk_register_queue(). These changes allow DM to use add_disk_no_queue_reg() to anchor its gendisk as the "master" for master/slave relationships DM must establish with subordinate devices referenced in DM tables that get loaded. Once all "slave" devices for a DM device are known its request_queue can be properly initialized and then advertised via sysfs -- important improvement being that no request_queue resource initialization performed by blk_register_queue() is missed for DM devices anymore. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-15Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+3
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-11fs: guard_bio_eod() needs to consider partitionsGreg Edwards1-0/+1
guard_bio_eod() needs to look at the partition capacity, not just the capacity of the whole device, when determining if truncation is necessary. [ 60.268688] attempt to access beyond end of device [ 60.268690] unknown-block(9,1): rw=0, want=67103509, limit=67103506 [ 60.268693] buffer_io_error: 2 callbacks suppressed [ 60.268696] Buffer I/O error on dev md1p7, logical block 4524305, async page read Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index") Cc: stable@vger.kernel.org # v4.13 Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Edwards <gedwards@ddn.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar1-0/+1
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-03block: introduce GENHD_FL_HIDDENChristoph Hellwig1-0/+1
With this flag a driver can create a gendisk that can be used for I/O submission inside the kernel, but which is not registered as user facing block device. This will be useful for the NVMe multipath implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03block: don't look at the struct device dev_t in disk_devtChristoph Hellwig1-1/+1
The hidden gendisks introduced in the next patch need to keep the dev field in their struct device empty so that udev won't try to create block device nodes for them. To support that rewrite disk_devt to look at the major and first_minor fields in the gendisk itself instead of looking into the struct device. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-26block, locking/lockdep: Assign a lock_class per gendisk used for ↵Byungchul Park1-2/+20
wait_for_completion() Darrick posted the following warning and Dave Chinner analyzed it: > ====================================================== > WARNING: possible circular locking dependency detected > 4.14.0-rc1-fixes #1 Tainted: G W > ------------------------------------------------------ > loop0/31693 is trying to acquire lock: > (&(&ip->i_mmaplock)->mr_lock){++++}, at: [<ffffffffa00f1b0c>] xfs_ilock+0x23c/0x330 [xfs] > > but now in release context of a crosslock acquired at the following: > ((complete)&ret.event){+.+.}, at: [<ffffffff81326c1f>] submit_bio_wait+0x7f/0xb0 > > which lock already depends on the new lock. > > the existing dependency chain (in reverse order) is: > > -> #2 ((complete)&ret.event){+.+.}: > lock_acquire+0xab/0x200 > wait_for_completion_io+0x4e/0x1a0 > submit_bio_wait+0x7f/0xb0 > blkdev_issue_zeroout+0x71/0xa0 > xfs_bmapi_convert_unwritten+0x11f/0x1d0 [xfs] > xfs_bmapi_write+0x374/0x11f0 [xfs] > xfs_iomap_write_direct+0x2ac/0x430 [xfs] > xfs_file_iomap_begin+0x20d/0xd50 [xfs] > iomap_apply+0x43/0xe0 > dax_iomap_rw+0x89/0xf0 > xfs_file_dax_write+0xcc/0x220 [xfs] > xfs_file_write_iter+0xf0/0x130 [xfs] > __vfs_write+0xd9/0x150 > vfs_write+0xc8/0x1c0 > SyS_write+0x45/0xa0 > entry_SYSCALL_64_fastpath+0x1f/0xbe > > -> #1 (&xfs_nondir_ilock_class){++++}: > lock_acquire+0xab/0x200 > down_write_nested+0x4a/0xb0 > xfs_ilock+0x263/0x330 [xfs] > xfs_setattr_size+0x152/0x370 [xfs] > xfs_vn_setattr+0x6b/0x90 [xfs] > notify_change+0x27d/0x3f0 > do_truncate+0x5b/0x90 > path_openat+0x237/0xa90 > do_filp_open+0x8a/0xf0 > do_sys_open+0x11c/0x1f0 > entry_SYSCALL_64_fastpath+0x1f/0xbe > > -> #0 (&(&ip->i_mmaplock)->mr_lock){++++}: > up_write+0x1c/0x40 > xfs_iunlock+0x1d0/0x310 [xfs] > xfs_file_fallocate+0x8a/0x310 [xfs] > loop_queue_work+0xb7/0x8d0 > kthread_worker_fn+0xb9/0x1f0 > > Chain exists of: > &(&ip->i_mmaplock)->mr_lock --> &xfs_nondir_ilock_class --> (complete)&ret.event > > Possible unsafe locking scenario by crosslock: > > CPU0 CPU1 > ---- ---- > lock(&xfs_nondir_ilock_class); > lock((complete)&ret.event); > lock(&(&ip->i_mmaplock)->mr_lock); > unlock((complete)&ret.event); > > *** DEADLOCK *** The warning is a false positive, caused by the fact that all wait_for_completion()s in submit_bio_wait() are waiting with the same lock class. However, some bios have nothing to do with others, for example in the case of loop devices, there's no direct connection between the bios of an upper device and the bios of a lower device(=loop device). The safest way to assign different lock classes to different devices is to do it for each gendisk. In other words, this patch assigns a lockdep_map per gendisk and uses it when initializing completion in submit_bio_wait(). Analyzed-by: Dave Chinner <david@fromorbit.com> Reported-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Byungchul Park <byungchul.park@lge.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: amir73il@gmail.com Cc: axboe@kernel.dk Cc: david@fromorbit.com Cc: hch@infradead.org Cc: idryomov@gmail.com Cc: johan@kernel.org Cc: johannes.berg@intel.com Cc: kernel-team@lge.com Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-xfs@vger.kernel.org Cc: oleg@redhat.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/1508921765-15396-10-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-09blk-mq: provide internal in-flight variantJens Axboe1-29/+6
We don't have to inc/dec some counter, since we can just iterate the tags. That makes inc/dec a noop, but means we have to iterate busy tags to get an in-flight count. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-09block: make part_in_flight() take an array of two intsJens Axboe1-3/+10
Instead of returning the count that matches the partition, pass in an array of two ints. Index 0 will be filled with the inflight count for the partition in question, and index 1 will filled with the root inflight count, if the partition passed in is not the root. This is in preparation for being able to calculate both in one go. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-09block: pass in queue to inflight accountingJens Axboe1-5/+9
No functional change in this patch, just in preparation for basing the inflight mechanism on the queue in question. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-05block: remove blk_part_pack_uuidChristoph Hellwig1-11/+0
This helper was only used by IMA of all things, which would get spurious errors if CONFIG_BLOCK is disabled. Just opencode the call there. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-04-21block: get rid of blk_integrity_revalidate()Ilya Dryomov1-2/+0
Commit 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") introduced blk_integrity_revalidate(), which seems to assume ownership of the stable pages flag and unilaterally clears it if no blk_integrity profile is registered: if (bi->profile) disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES; else disk->queue->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES; It's called from revalidate_disk() and rescan_partitions(), making it impossible to enable stable pages for drivers that support partitions and don't use blk_integrity: while the call in revalidate_disk() can be trivially worked around (see zram, which doesn't support partitions and hence gets away with zram_revalidate_disk()), rescan_partitions() can be triggered from userspace at any time. This breaks rbd, where the ceph messenger is responsible for generating/verifying CRCs. Since blk_integrity_{un,}register() "must" be used for (un)registering the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES setting there. This way drivers that call blk_integrity_register() and use integrity infrastructure won't interfere with drivers that don't but still want stable pages. Fixes: 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 4.4+, needs backporting Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-25block: constify struct blk_integrity_profileEric Biggers1-5/+5
blk_integrity_profile's are never modified, so mark them 'const' so that they are placed in .rodata and benefit from memory protection. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08Revert "scsi, block: fix duplicate bdi name registration crashes"Jan Kara1-8/+0
This reverts commit 0dba1314d4f81115dce711292ec7981d17231064. It causes leaking of device numbers for SCSI when SCSI registers multiple gendisks for one request_queue in succession. It can be easily reproduced using Omar's script [1] on kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE. Furthermore the protection provided by this commit is not needed anymore as the problem it was fixing got also fixed by commit 165a5e22fafb "block: Move bdi_unregister() to del_gendisk()". [1]: http://marc.info/?l=linux-block&m=148554717109098&w=2 Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02scsi, block: fix duplicate bdi name registration crashesDan Williams1-0/+8
Warnings of the following form occur because scsi reuses a devt number while the block layer still has it referenced as the name of the bdi [1]: WARNING: CPU: 1 PID: 93 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/devices/virtual/bdi/8:192' [..] Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 ? kernfs_path_from_node+0x4f/0x60 sysfs_warn_dup+0x62/0x80 sysfs_create_dir_ns+0x77/0x90 kobject_add_internal+0xb2/0x350 kobject_add+0x75/0xd0 device_add+0x15a/0x650 device_create_groups_vargs+0xe0/0xf0 device_create_vargs+0x1c/0x20 bdi_register+0x90/0x240 ? lockdep_init_map+0x57/0x200 bdi_register_owner+0x36/0x60 device_add_disk+0x1bb/0x4e0 ? __pm_runtime_use_autosuspend+0x5c/0x70 sd_probe_async+0x10d/0x1c0 async_run_entry_fn+0x39/0x170 This is a brute-force fix to pass the devt release information from sd_probe() to the locations where we register the bdi, device_add_disk(), and unregister the bdi, blk_cleanup_queue(). Thanks to Omar for the quick reproducer script [2]. This patch survives where an unmodified kernel fails in a few seconds. [1]: https://marc.info/?l=linux-scsi&m=147116857810716&w=4 [2]: http://marc.info/?l=linux-block&m=148554717109098&w=2 Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Jan Kara <jack@suse.cz> Reported-by: Omar Sandoval <osandov@osandov.com> Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-22genhd: remove dead and duplicated scsi codeJon Derrick1-9/+0
blk_scsi_cmd_filter use was deprecated by 4beab5c6 and the SCSI macros are duplicated in blkdev.h, both likely reintroduced by a bad merge from 540eed56. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-11latent_entropy: Mark functions with __latent_entropyEmese Revfy1-1/+1
The __latent_entropy gcc attribute can be used only on functions and variables. If it is on a function then the plugin will instrument it for gathering control-flow entropy. If the attribute is on a variable then the plugin will initialize it with random contents. The variable must be an integer, an integer array type or a structure with integer fields. These specific functions have been selected because they are init functions (to help gather boot-time entropy), are called at unpredictable times, or they have variable loops, each of which provide some level of latent entropy. Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: expanded commit message] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-06-27block: remove ->driverfs_devDan Williams1-3/+1
Now that all drivers that specify a ->driverfs_dev have been converted to device_add_disk(), the pointer can be removed from struct gendisk. Cc: Jens Axboe <axboe@fb.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-16block: introduce device_add_disk()Dan Williams1-1/+7
In preparation for removing the ->driverfs_dev member of a gendisk, add an api that takes the parent device as a parameter to add_disk(). For now this maintains the status quo of WARN()ing on failure, but not return a error code. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-21include/linux/genhd.h: move to use generic UUID libraryAndy Shevchenko1-20/+3
UUID library provides uuid_be type and uuid_be_to_bin() function. This substitutes open coded variant by generic library calls. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-10block: kill disk_{check|set|clear|alloc}_badblocksDan Williams1-5/+0
These actions are completely managed by a block driver or can use the badblocks api directly. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-01-09block: Add badblock management for gendisksVishal Verma1-0/+7
NVDIMM devices, which can behave more like DRAM rather than block devices, may develop bad cache lines, or 'poison'. A block device exposed by the pmem driver can then consume poison via a read (or write), and cause a machine check. On platforms without machine check recovery features, this would mean a crash. The block device maintaining a runtime list of all known sectors that have poison can directly avoid this, and also provide a path forward to enable proper handling/recovery for DAX faults on such a device. Use the new badblock management interfaces to add a badblocks list to gendisks. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-10-21block: move blk_integrity to request_queueDan Williams1-1/+0
A trace like the following proceeds a crash in bio_integrity_process() when it goes to use an already freed blk_integrity profile. BUG: unable to handle kernel paging request at ffff8800d31b10d8 IP: [<ffff8800d31b10d8>] 0xffff8800d31b10d8 PGD 2f65067 PUD 21fffd067 PMD 80000000d30001e3 Oops: 0011 [#1] SMP Dumping ftrace buffer: --------------------------------- ndctl-2222 2.... 44526245us : disk_release: pmem1s systemd--2223 4.... 44573945us : bio_integrity_endio: pmem1s <...>-409 4.... 44574005us : bio_integrity_process: pmem1s --------------------------------- [..] Call Trace: [<ffffffff8144e0f9>] ? bio_integrity_process+0x159/0x2d0 [<ffffffff8144e4f6>] bio_integrity_verify_fn+0x36/0x60 [<ffffffff810bd2dc>] process_one_work+0x1cc/0x4e0 Given that a request_queue is pinned while i/o is in flight and that a gendisk is allowed to have a shorter lifetime, move blk_integrity to request_queue to satisfy requests arriving after the gendisk has been torn down. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> [martin: fix the CONFIG_BLK_DEV_INTEGRITY=n case] Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: Inline blk_integrity in struct gendiskMartin K. Petersen1-2/+24
Up until now the_integrity profile has been dynamically allocated and attached to struct gendisk after the disk has been made active. This causes problems because NVMe devices need to register the profile prior to the partition table being read due to a mandatory metadata buffer requirement. In addition, DM goes through hoops to deal with preallocating, but not initializing integrity profiles. Since the integrity profile is small (4 bytes + a pointer), Christoph suggested moving it to struct gendisk proper. This requires several changes: - Moving the blk_integrity definition to genhd.h. - Inlining blk_integrity in struct gendisk. - Removing the dynamic allocation code. - Adding helper functions which allow gendisk to set up and tear down the integrity sysfs dir when a disk is added/deleted. - Adding a blk_integrity_revalidate() callback for updating the stable pages bdi setting. - The calls that depend on whether a device has an integrity profile or not now key off of the bi->profile pointer. - Simplifying the integrity support routines in DM (Mike Snitzer). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: Move integrity kobject to struct gendiskMartin K. Petersen1-0/+1
The integrity kobject purely exists to support the integrity subdirectory in sysfs and doesn't really have anything to do with the blk_integrity data structure. Move the kobject to struct gendisk where it belongs. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17block: partition: convert percpu refMing Lei1-10/+17
Percpu refcount is the perfect match for partition's case, and the conversion is quite straight. With the convertion, one pair of atomic inc/dec can be saved for accounting block I/O, which is run in hot path of block I/O. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17block: partition: introduce hd_free_part()Ming Lei1-0/+6
So the helper can be used in both generic partition case and part0 case. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra1-1/+1
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-25block: fix part_pack_uuid() build errorMimi Zohar1-0/+10
Commit "85865c1 ima: add policy support for file system uuid" introduced a CONFIG_BLOCK dependency. This patch defines a wrapper called blk_part_pack_uuid(), which returns -EINVAL, when CONFIG_BLOCK is not defined. security/integrity/ima/ima_policy.c:538:4: error: implicit declaration of function 'part_pack_uuid' [-Werror=implicit-function-declaration] Changelog v2: - Reference commit number in patch description Changelog v1: - rename ima_part_pack_uuid() to blk_part_pack_uuid() - resolve scripts/checkpatch.pl warnings Changelog v0: - fix UUID scripts/Lindent msgs Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: David Rientjes <rientjes@google.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-11-23block: store partition_meta_info.uuid as a stringStephen Warren1-2/+6
This will allow other types of UUID to be stored here, aside from true UUIDs. This also simplifies code that uses this field, since it's usually constructed from a, used as a, or compared to other, strings. Note: A simplistic approach here would be to set uuid_str[36]=0 whenever a /PARTNROFF option was found to be present. However, this modifies the input string, and causes subsequent calls to devt_from_partuuid() not to see the /PARTNROFF option, which causes different results. In order to avoid misleading future maintainers, this parameter is marked const. Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: Tejun Heo <tj@kernel.org> Cc: Will Drewry <wad@chromium.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>