summaryrefslogtreecommitdiff
path: root/include/linux/if_vlan.h
AgeCommit message (Collapse)AuthorFilesLines
2020-07-08vlan: consolidate VLAN parsing code and limit max parsing depthToke Høiland-Jørgensen1-35/+22
Toshiaki pointed out that we now have two very similar functions to extract the L3 protocol number in the presence of VLAN tags. And Daniel pointed out that the unbounded parsing loop makes it possible for maliciously crafted packets to loop through potentially hundreds of tags. Fix both of these issues by consolidating the two parsing functions and limiting the VLAN tag parsing to a max depth of 8 tags. As part of this, switch over __vlan_get_protocol() to use skb_header_pointer() instead of pskb_may_pull(), to avoid the possible side effects of the latter and keep the skb pointer 'const' through all the parsing functions. v2: - Use limit of 8 tags instead of 32 (matching XMIT_RECURSION_LIMIT) Reported-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Reported-by: Daniel Borkmann <daniel@iogearbox.net> Fixes: d7bf2ebebc2b ("sched: consistently handle layer3 header accesses in the presence of VLANs") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-04sched: consistently handle layer3 header accesses in the presence of VLANsToke Høiland-Jørgensen1-0/+28
There are a couple of places in net/sched/ that check skb->protocol and act on the value there. However, in the presence of VLAN tags, the value stored in skb->protocol can be inconsistent based on whether VLAN acceleration is enabled. The commit quoted in the Fixes tag below fixed the users of skb->protocol to use a helper that will always see the VLAN ethertype. However, most of the callers don't actually handle the VLAN ethertype, but expect to find the IP header type in the protocol field. This means that things like changing the ECN field, or parsing diffserv values, stops working if there's a VLAN tag, or if there are multiple nested VLAN tags (QinQ). To fix this, change the helper to take an argument that indicates whether the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we make sure to skip all of them, so behaviour is consistent even in QinQ mode. To make the helper usable from the ECN code, move it to if_vlan.h instead of pkt_sched.h. v3: - Remove empty lines - Move vlan variable definitions inside loop in skb_protocol() - Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and bpf_skb_ecn_set_ce() v2: - Use eth_type_vlan() helper in skb_protocol() - Also fix code that reads skb->protocol directly - Change a couple of 'if/else if' statements to switch constructs to avoid calling the helper twice Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com> Fixes: d8b9605d2697 ("net: sched: fix skb->protocol use in case of accelerated vlan path") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-25net: remove unnecessary variables and callbackTaehee Yoo1-11/+0
This patch removes variables and callback these are related to the nested device structure. devices that can be nested have their own nest_level variable that represents the depth of nested devices. In the previous patch, new {lower/upper}_level variables are added and they replace old private nest_level variable. So, this patch removes all 'nest_level' variables. In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added to get lockdep subclass value, which is actually lower nested depth value. But now, they use the dynamic lockdep key to avoid lockdep warning instead of the subclass. So, this patch removes ->ndo_get_lock_subclass() callback. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-6/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22net/vlan: introduce skb_vlan_tag_get_cfi() helperMichał Mirosław1-1/+2
Abstract CFI/DEI bit access consistently with other VLAN tag fields. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17net: remove VLAN_TAG_PRESENTMichał Mirosław1-5/+6
Replace VLAN_TAG_PRESENT with single bit flag and free up VLAN.CFI overload. Now VLAN.CFI is visible in networking stack and can be passed around intact. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: 8021q: vlan_core: allow use list of vlans for real deviceIvan Khoronzhuk1-0/+11
It's redundancy for the drivers to hold the list of vlans when absolutely the same list exists in vlan core. In most cases it's needed only to traverse the vlan devices, their vids and sync some settings with h/w, so add API to simplify this. At least some of these drivers also can benefit: grep "for_each.*vid" -r drivers/net/ethernet/ drivers/net/ethernet/hisilicon/hns3/hns3_enet.c: drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c: drivers/net/ethernet/qlogic/qlge/qlge_main.c: drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c: drivers/net/ethernet/via/via-rhine.c: drivers/net/ethernet/via/via-velocity.c: drivers/net/ethernet/intel/igb/igb_main.c: drivers/net/ethernet/intel/ice/ice_main.c: drivers/net/ethernet/intel/e1000/e1000_main.c: drivers/net/ethernet/intel/i40e/i40e_main.c: drivers/net/ethernet/intel/e1000e/netdev.c: drivers/net/ethernet/intel/igbvf/netdev.c: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: drivers/net/ethernet/intel/ixgb/ixgb_main.c: drivers/net/ethernet/intel/ixgbe/ixgbe_main.c: drivers/net/ethernet/amd/xgbe/xgbe-dev.c: drivers/net/ethernet/emulex/benet/be_main.c: drivers/net/ethernet/neterion/vxge/vxge-main.c: drivers/net/ethernet/adaptec/starfire.c: drivers/net/ethernet/brocade/bna/bnad.c: Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net/vlan: remove unused #define HAVE_VLAN_GET_TAGMichał Mirosław1-2/+0
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net/vlan: include the shift in skb_vlan_tag_get_prio()Michał Mirosław1-1/+1
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net/vlan: introduce __vlan_hwaccel_copy_tag() helperMichał Mirosław1-0/+13
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net/vlan: introduce __vlan_hwaccel_clear_tag() helperMichał Mirosław1-1/+12
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03vlan: use non-archaic spelling of failesThadeu Lima de Souza Cascardo1-2/+2
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17vlan: Fix reading memory beyond skb->tail in skb_vlan_tagged_multiToshiaki Makita1-2/+5
Syzkaller spotted an old bug which leads to reading skb beyond tail by 4 bytes on vlan tagged packets. This is caused because skb_vlan_tagged_multi() did not check skb_headlen. BUG: KMSAN: uninit-value in eth_type_vlan include/linux/if_vlan.h:283 [inline] BUG: KMSAN: uninit-value in skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline] BUG: KMSAN: uninit-value in vlan_features_check include/linux/if_vlan.h:672 [inline] BUG: KMSAN: uninit-value in dflt_features_check net/core/dev.c:2949 [inline] BUG: KMSAN: uninit-value in netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009 CPU: 1 PID: 3582 Comm: syzkaller435149 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 eth_type_vlan include/linux/if_vlan.h:283 [inline] skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline] vlan_features_check include/linux/if_vlan.h:672 [inline] dflt_features_check net/core/dev.c:2949 [inline] netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009 validate_xmit_skb+0x89/0x1320 net/core/dev.c:3084 __dev_queue_xmit+0x1cb2/0x2b60 net/core/dev.c:3549 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c57/0x8a10 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] sock_write_iter+0x3b9/0x470 net/socket.c:909 do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776 do_iter_write+0x30d/0xd40 fs/read_write.c:932 vfs_writev fs/read_write.c:977 [inline] do_writev+0x3c9/0x830 fs/read_write.c:1012 SYSC_writev+0x9b/0xb0 fs/read_write.c:1085 SyS_writev+0x56/0x80 fs/read_write.c:1082 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x43ffa9 RSP: 002b:00007fff2cff3948 EFLAGS: 00000217 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043ffa9 RDX: 0000000000000001 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004018d0 R13: 0000000000401960 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6444/0x8a10 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] sock_write_iter+0x3b9/0x470 net/socket.c:909 do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776 do_iter_write+0x30d/0xd40 fs/read_write.c:932 vfs_writev fs/read_write.c:977 [inline] do_writev+0x3c9/0x830 fs/read_write.c:1012 SYSC_writev+0x9b/0xb0 fs/read_write.c:1085 SyS_writev+0x56/0x80 fs/read_write.c:1082 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 58e998c6d239 ("offloading: Force software GSO for multiple vlan tags.") Reported-and-tested-by: syzbot+0bbe42c764feafa82c5a@syzkaller.appspotmail.com Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+13
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30vlan: Fix vlan insertion for packets without ethernet headerToshiaki Makita1-2/+13
In some situation vlan packets do not have ethernet headers. One example is packets from tun devices. Users can specify vlan protocol in tun_pi field instead of IP protocol. When we have a vlan device with reorder_hdr disabled on top of the tun device, such packets from tun devices are untagged in skb_vlan_untag() and vlan headers will be inserted back in vlan_insert_inner_tag(). vlan_insert_inner_tag() however did not expect packets without ethernet headers, so in such a case size argument for memmove() underflowed. We don't need to copy headers for packets which do not have preceding headers of vlan headers, so skip memmove() in that case. Also don't write vlan protocol in skb->data when it does not have enough room for it. Fixes: cbe7128c4b92 ("vlan: Fix out of order vlan headers with reorder header off") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: Call add/kill vid ndo on vlan filter feature togglingGal Pressman1-0/+24
NETIF_F_HW_VLAN_[CS]TAG_FILTER features require more than just a bit flip in dev->features in order to keep the driver in a consistent state. These features notify the driver of each added/removed vlan, but toggling of vlan-filter does not notify the driver accordingly for each of the existing vlans. This patch implements a similar solution to NETIF_F_RX_UDP_TUNNEL_PORT behavior (which notifies the driver about UDP ports in the same manner that vids are reported). Each toggling of the features propagates to the 8021q module, which iterates over the vlans and call add/kill ndo accordingly. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16vlan: Fix out of order vlan headers with reorder header offToshiaki Makita1-11/+55
With reorder header off, received packets are untagged in skb_vlan_untag() called from within __netif_receive_skb_core(), and later the tag will be inserted back in vlan_do_receive(). This caused out of order vlan headers when we create a vlan device on top of another vlan device, because vlan_do_receive() inserts a tag as the outermost vlan tag. E.g. the outer tag is first removed in skb_vlan_untag() and inserted back in vlan_do_receive(), then the inner tag is next removed and inserted back as the outermost tag. This patch fixes the behaviour by inserting the inner tag at the right position. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg1-1/+1
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24vlan: Fix tcp checksum offloads in Q-in-Q vlansVlad Yasevich1-8/+10
It appears that TCP checksum offloading has been broken for Q-in-Q vlans. The behavior was execerbated by the series commit afb0bc972b52 ("Merge branch 'stacked_vlan_tso'") that that enabled accleleration features on stacked vlans. However, event without that series, it is possible to trigger this issue. It just requires a lot more specialized configuration. The root cause is the interaction between how netdev_intersect_features() works, the features actually set on the vlan devices and HW having the ability to run checksum with longer headers. The issue starts when netdev_interesect_features() replaces NETIF_F_HW_CSUM with a combination of NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM, if the HW advertises IP|IPV6 specific checksums. This happens for tagged and multi-tagged packets. However, HW that enables IP|IPV6 checksum offloading doesn't gurantee that packets with arbitrarily long headers can be checksummed. This patch disables IP|IPV6 checksums on the packet for multi-tagged packets. CC: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> CC: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15vxlan: avoid vlan processing in vxlan device.pravin shelar1-16/+0
VxLan device does not have special handling for vlan taging on egress. Therefore it does not make sense to expose vlan offloading feature. This patch does not change vxlan functinality. Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09vlan: Check for vlan ethernet types for 8021.q or 802.1adEric Garver1-10/+23
This is to simplify using double tagged vlans. This function allows all valid vlan ethertypes to be checked in a single function call. Also replace some instances that check for both ETH_P_8021Q and ETH_P_8021AD. Patch based on one originally by Thomas F Herbert. Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com> Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19flow_dissector: Get vlan priority in addition to vlan idHadar Hen Zion1-0/+1
Add vlan priority check to the flow dissector by adding new flow dissector struct, flow_dissector_key_vlan which includes vlan tag fields. vlan_id and flow_label fields were under the same struct (flow_dissector_key_tags). It was a convenient setting since struct flow_dissector_key_tags is used by struct flow_keys and by setting vlan_id and flow_label under the same struct, we get precisely 24 or 48 bytes in flow_keys from flow_dissector_key_basic. Now, when adding vlan priority support, the code will be cleaner if flow_label and vlan tag won't be under the same struct anymore. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUMTom Herbert1-1/+1
These netif flags are unnecessary convolutions. It is more straightforward to just use NETIF_F_HW_CSUM, NETIF_F_IP_CSUM, and NETIF_F_IPV6_CSUM directly. This patch also: - Cleans up can_checksum_protocol - Simplifies netdev_intersect_features Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-06net: constify netif_is_* helpers net_device paramJiri Pirko1-1/+1
As suggested by Eric, these helpers should have const dev param. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02vlan: Add GRO support for non hardware accelerated vlanToshiaki Makita1-0/+20
Currently packets with non-hardware-accelerated vlan cannot be handled by GRO. This causes low performance for 802.1ad and stacked vlan, as their vlan tags are currently not stripped by hardware. This patch adds GRO support for non-hardware-accelerated vlan and improves receive performance of them. Test Environment: vlan device (.1Q) on vlan device (.1ad) on ixgbe (82599) Result: - Before $ netperf -t TCP_STREAM -H 192.168.20.2 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.00 5233.17 Rx side CPU usage: %usr %sys %irq %soft %idle 0.27 58.03 0.00 41.70 0.00 - After $ netperf -t TCP_STREAM -H 192.168.20.2 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.00 7586.85 Rx side CPU usage: %usr %sys %irq %soft %idle 0.50 25.83 0.00 59.53 14.14 [ Register VLAN offloads with priority 10 -DaveM ] Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31if_vlan: fix vlaue -> value typoVivien Didelot1-3/+3
Fixes "vlaue" for "value" in include/linux/if_vlan.h. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-06vlan: Use eth_proto_is_802_3Alexander Duyck1-1/+1
Replace "ntohs(proto) >= ETH_P_802_3_MIN" w/ eth_proto_is_802_3(proto). Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: Move check for multiple vlans to driversToshiaki Makita1-0/+22
To allow drivers to handle the features check for multiple tags, move the check to ndo_features_check(). As no drivers currently handle multiple tagged TSO, introduce dflt_features_check() and call it if the driver does not have ndo_features_check(). Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29vlan: Introduce helper functions to check if skb is taggedToshiaki Makita1-0/+45
Separate the two checks for single vlan and multiple vlans in netif_skb_features(). This allows us to move the check for multiple vlans to another function later. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-14/+46
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31net: Fix vlan_get_protocol for stacked vlanToshiaki Makita1-14/+46
vlan_get_protocol() could not get network protocol if a skb has a 802.1ad vlan tag or multiple vlans, which caused incorrect checksum calculation in several drivers. Fix vlan_get_protocol() to retrieve network protocol instead of incorrect vlan protocol. As the logic is the same as skb_network_protocol(), create a common helper function __vlan_get_protocol() and call it from existing functions. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-8/+8
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: introduce __vlan_insert_tag helper which does not free skbJiri Pirko1-11/+34
There's a need for helper which inserts vlan tag but does not free the skb in case of an error. Suggested-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: introduce *vlan_hwaccel_push_inside helpersJiri Pirko1-0/+34
Use them to push skb->vlan_tci into the payload and avoid code duplication. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: rename __vlan_put_tag to vlan_insert_tag_set_protoJiri Pirko1-3/+5
Name fits better. Plus there's going to be introduced __vlan_insert_tag later on. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: kill vlan_put_tag helperJiri Pirko1-19/+0
Since both tx and rx paths work with skb->vlan_tci, there's no need for this function anymore. Switch users directly to __vlan_hwaccel_put_tag. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: make __vlan_hwaccel_put_tag return voidJiri Pirko1-5/+4
Always returns the same skb it gets, so change to void. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11net: Always untag vlan-tagged traffic on input.Vlad Yasevich1-6/+0
Currently the functionality to untag traffic on input resides as part of the vlan module and is build only when VLAN support is enabled in the kernel. When VLAN is disabled, the function vlan_untag() turns into a stub and doesn't really untag the packets. This seems to create an interesting interaction between VMs supporting checksum offloading and some network drivers. There are some drivers that do not allow the user to change tx-vlan-offload feature of the driver. These drivers also seem to assume that any VLAN-tagged traffic they transmit will have the vlan information in the vlan_tci and not in the vlan header already in the skb. When transmitting skbs that already have tagged data with partial checksum set, the checksum doesn't appear to be updated correctly by the card thus resulting in a failure to establish TCP connections. The following is a packet trace taken on the receiver where a sender is a VM with a VLAN configued. The host VM is running on doest not have VLAN support and the outging interface on the host is tg3: 10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294837885 ecr 0,nop,wscale 7], length 0 10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294838888 ecr 0,nop,wscale 7], length 0 This connection finally times out. I've only access to the TG3 hardware in this configuration thus have only tested this with TG3 driver. There are a lot of other drivers that do not permit user changes to vlan acceleration features, and I don't know if they all suffere from a similar issue. The patch attempt to fix this another way. It moves the vlan header stipping code out of the vlan module and always builds it into the kernel network core. This way, even if vlan is not supported on a virtualizatoin host, the virtual machines running on top of such host will still work with VLANs enabled. CC: Patrick McHardy <kaber@trash.net> CC: Nithin Nayak Sujir <nsujir@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+14
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-20vlan: Fix build error wth vlan_get_encap_level()Vlad Yasevich1-5/+11
The new function vlan_get_encap_level() uses vlan_dev_priv() which is only conditionally avaialble when VLAN support is enabled. Make vlan_get_encap_level() conditionally available as well. Fixes: 44a4085538c8 ("bonding: Fix stacked device detection in arp monitoring") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> CC: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17bonding: Fix stacked device detection in arp monitoringVlad Yasevich1-0/+6
Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17vlan: Fix lockdep warning with stacked vlan devices.Vlad Yasevich1-1/+2
This reverts commit dc8eaaa006350d24030502a4521542e74b5cb39f. vlan: Fix lockdep warning when vlan dev handle notification Instead we use the new new API to find the lock subclass of our vlan device. This way we can support configurations where vlans are interspersed with other devices: bond -> vlan -> macvlan -> vlan Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12vlan: rename __vlan_find_dev_deep() to __vlan_find_dev_deep_rcu()dingtianhong1-2/+2
The __vlan_find_dev_deep should always called in RCU, according David's suggestion, rename to __vlan_find_dev_deep_rcu looks more reasonable. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27vlan: make a new function vlan_dev_vlan_proto() and exportdingtianhong1-0/+7
The vlan support 2 proto: 802.1q and 802.1ad, so make a new function called vlan_dev_vlan_proto() which could return the vlan proto for input dev. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25if_vlan: Call dev_kfree_skb_any instead of kfree_skb.Eric W. Biederman1-1/+1
Replace kfree_skb with dev_kfree_skb_any in vlan_insert_tag as vlan_insert_tag can be called from hard irq context (netpoll) and from other contexts. dev_kfree_skb_any is used as vlan_insert_tag only frees the skb if the skb can not be modified to insert a tag, in which case vlan_insert_tag drops the skb. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-01-068021q: make vlan_pcpu_stats visible without CONFIG_VLAN_8021QHannes Frederic Sowa1-19/+19
macvlan needs vlan_pcpu_stats so make it visible even if compiling without VLAN_8021Q support. Otherwise a very long compiler error happens. Fixes: cdf3e274cf1b36 ("macvlan: unify macvlan_pcpu_stats and vlan_pcpu_stats") Cc: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-By: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11vlan: Implement vlan_dev_get_egress_qos_mask as an inline.David S. Miller1-2/+96
This is to avoid very silly Kconfig dependencies for modules using this routine. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-08net/vlan: Provide read access to the vlan egress mapEyal Perry1-1/+8
Provide a method for read-only access to the vlan device egress mapping. Do this by refactoring vlan_dev_get_egress_qos_mask() such that now it receives as an argument the skb priority instead of pointer to the skb. Such an access is needed for the IBoE stack where the control plane goes through the network stack. This is an add-on step on top of commit d4a968658c "net/route: export symbol ip_tos2prio" which allowed the RDMA-CM to use ip_tos2prio. Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-19vlan: mask vlan prio bitsEric Dumazet1-2/+1
In commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e ("vlan: don't deliver frames for unknown vlans to protocols") Florian made sure we set pkt_type to PACKET_OTHERHOST if the vlan id is set and we could find a vlan device for this particular id. But we also have a problem if prio bits are set. Steinar reported an issue on a router receiving IPv6 frames with a vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device, because skb->vlan_tci is set. Forwarded frame is completely corrupted : We can see (8100:4000) being inserted in the middle of IPv6 source address : 16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 > 9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64 0x0000: 0000 0029 8000 c7c3 7103 0001 a0ae e651 0x0010: 0000 0000 ccce 0b00 0000 0000 1011 1213 0x0020: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223 0x0030: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233 It seems we are not really ready to properly cope with this right now. We can probably do better in future kernels : vlan_get_ingress_priority() should be a netdev property instead of a per vlan_dev one. For stable kernels, lets clear vlan_tci to fix the bugs. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/ethernet/freescale/fec_main.c drivers/net/ethernet/renesas/sh_eth.c net/ipv4/gre.c The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list) and the splitting of the gre.c code into seperate files. The FEC conflict was two sets of changes adding ethtool support code in an "!CONFIG_M5272" CPP protected block. Finally the sh_eth.c conflict was between one commit add bits set in the .eesr_err_check mask whilst another commit removed the .tx_error_check member and assignments. Signed-off-by: David S. Miller <davem@davemloft.net>