summaryrefslogtreecommitdiff
path: root/include/linux/mroute_base.h
AgeCommit message (Collapse)AuthorFilesLines
2018-10-16net: Plumb support for filtering ipv4 and ipv6 multicast route dumpsDavid Ahern1-3/+4
Implement kernel side filtering of routes by egress device index and table id. If the table id is given in the filter, lookup table and call mr_table_dump directly for it. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16ipmr: Refactor mr_rtm_dumprouteDavid Ahern1-0/+6
Move per-table loops from mr_rtm_dumproute to mr_table_dump and export mr_table_dump for dumps by specific table id. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-14net: ipmr: add support for passing full packet on wrong vifNikolay Aleksandrov1-0/+1
This patch adds support for IGMPMSG_WRVIFWHOLE which is used to pass full packet and real vif id when the incoming interface is wrong. While the RP and FHR are setting up state we need to be sending the registers encapsulated with all the data inside otherwise we lose it. The RP then decapsulates it and forwards it to the interested parties. Currently with WRONGVIF we can only be sending empty register packets and will lose that data. This behaviour can be enabled by using MRT_PIM with val == IGMPMSG_WRVIFWHOLE. This doesn't prevent IGMPMSG_WRONGVIF from happening, it happens in addition to it, also it is controlled by the same throttling parameters as WRONGVIF (i.e. 1 packet per 3 seconds currently). Both messages are generated to keep backwards compatibily and avoid breaking someone who was enabling MRT_PIM with val == 4, since any positive val is accepted and treated the same. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22rhashtable: split rhashtable.hNeilBrown1-1/+1
Due to the use of rhashtables in net namespaces, rhashtable.h is included in lots of the kernel, so a small changes can required a large recompilation. This makes development painful. This patch splits out rhashtable-types.h which just includes the major type declarations, and does not include (non-trivial) inline code. rhashtable.h is no longer included by anything in the include/ directory. Common include files only include rhashtable-types.h so a large recompilation is only triggered when that changes. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05ipmr: fix error path when ipmr_new_table failsSabrina Dubroca1-10/+0
commit 0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table") refactored ipmr_new_table, so that it now returns NULL when mr_table_alloc fails. Unfortunately, all callers of ipmr_new_table expect an ERR_PTR. This can result in NULL deref, for example when ipmr_rules_exit calls ipmr_free_table with NULL net->ipv4.mrt in the !CONFIG_IP_MROUTE_MULTIPLE_TABLES version. This patch makes mr_table_alloc return errors, and changes ip6mr_new_table and its callers to return/expect error pointers as well. It also removes the version of mr_table_alloc defined under !CONFIG_IP_MROUTE_COMMON, since it is never used. Fixes: 0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ip6mr: Add refcounting to mfcYuval Mintz1-0/+13
Since ipmr and ip6mr are using the same mr_mfc struct at their core, we can now refactor the ipmr_cache_{hold,put} logic and apply refcounting to both ipmr and ip6mr. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ipmr: Make ipmr_dump() commonYuval Mintz1-0/+18
Since all the primitive elements used for the notification done by ipmr are now common [mr_table, mr_mfc, vif_device] we can refactor the logic for dumping them to a common file. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ipmr: Make MFC fib notifiers commonYuval Mintz1-0/+44
Like vif notifications, move the notifier struct for MFC as well as its helpers into a common file; Currently they're only used by ipmr. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ipmr: Make vif fib notifiers commonYuval Mintz1-0/+53
The fib-notifiers are tightly coupled with the vif_device which is already common. Move the notifier struct definition and helpers to the common file; Currently they're only used by ipmr. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ipmr, ip6mr: Unite dumproute flowsYuval Mintz1-0/+29
The various MFC entries are being held in the same kind of mr_tables for both ipmr and ip6mr, and their traversal logic is identical. Also, with the exception of the addresses [and other small tidbits] the major bulk of the nla setting is identical. Unite as much of the dumping as possible between the two. Notice this requires creating an mr_table iterator for each, as the for-each preprocessor macro can't be used by the common logic. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ip6mr: Remove MFC_NOTIFY and refactor flagsYuval Mintz1-0/+9
MFC_NOTIFY exists in ip6mr, probably as some legacy code [was already removed for ipmr in commit 06bd6c0370bb ("net: ipmr: remove unused MFC_NOTIFY flag and make the flags enum"). Remove it from ip6mr as well, and move the enum into a common file; Notice MFC_OFFLOAD is currently only used by ipmr. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ipmr, ip6mr: Unite vif seq functionsYuval Mintz1-0/+33
Same as previously done with the mfc seq, the logic for the vif seq is refactored to be shared between ipmr and ip6mr. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ipmr, ip6mr: Unite mfc seq logicYuval Mintz1-0/+69
With the exception of the final dump, ipmr and ip6mr have the exact same seq logic for traversing a given mr_table. Refactor that code and make it common. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ipmr, ip6mr: Unite logic for searching in MFC cacheYuval Mintz1-3/+49
ipmr and ip6mr utilize the exact same methods for searching the hashed resolved connections, difference being only in the construction of the hash comparison key. In order to unite the flow, introduce an mr_table operation set that would contain the protocol specific information required for common flows, in this case - the hash parameters and a comparison key representing a (*,*) route. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ipmr, ip6mr: Make mfc_cache a common structureYuval Mintz1-0/+45
mfc_cache and mfc6_cache are almost identical - the main difference is in the origin/group addresses and comparison-key. Make a common structure encapsulating most of the multicast routing logic - mr_mfc and convert both ipmr and ip6mr into using it. For easy conversion [casting, in this case] mr_mfc has to be the first field inside every multicast routing abstraction utilizing it. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ipmr, ip6mr: Unite creation of new mr_tableYuval Mintz1-0/+17
Now that both ipmr and ip6mr are using the same mr_table structure, we can have a common function to allocate & initialize a new instance. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01mroute*: Make mr_table a common structYuval Mintz1-0/+46
Following previous changes to ip6mr, mr_table and mr6_table are basically the same [up to mr6_table having additional '6' suffixes to its variable names]. Move the common structure definition into a common header; This requires renaming all references in ip6mr to variables that had the distinct suffix. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ipmr,ipmr6: Define a uniform vif_deviceYuval Mintz1-0/+52
The two implementations have almost identical structures - vif_device and mif_device. As a step toward uniforming the mr_tables, eliminate the mif_device and relocate the vif_device definition into a new common header file. Also, introduce a common initializing function for setting most of the vif_device fields in a new common source file. This requires modifying the ipv{4,6] Kconfig and ipv4 makefile as we're introducing a new common config option - CONFIG_IP_MROUTE_COMMON. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>