summaryrefslogtreecommitdiff
path: root/include/linux/mtd
AgeCommit message (Collapse)AuthorFilesLines
2021-04-16mtd: core: Constify buf in mtd_write_user_prot_reg()Tudor Ambarus1-2/+3
The write buffer comes from user and should be const. Constify write buffer in mtd core and across all _write_user_prot_reg() users. cfi_cmdset_{0001, 0002} and onenand_base will pay the cost of an explicit cast to discard the const qualifier since the beginning, since they are using an otp_op_t function prototype that is used for both reads and writes. mtd_dataflash and SPI NOR will benefit of the const buffer because they are using different paths for writes and reads. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210403060931.7119-1-tudor.ambarus@microchip.com
2021-04-15Merge tag 'nand/for-5.13' of ↵Richard Weinberger4-4/+36
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next MTD core: * Handle possible -EPROBE_DEFER from parse_mtd_partitions() NAND core: * Fix error handling in nand_prog_page_op() (x2) * Add a helper to retrieve the number of ECC bytes per step * Add a helper to retrieve the number of ECC steps * Let ECC engines advertize the exact number of steps * ECC Hamming: - Populate the public nsteps field - Use the public nsteps field * ECC BCH: - Populate the public nsteps field - Use the public nsteps field Raw NAND core: * Add support for secure regions in NAND memory * Try not to use the ECC private structures * Remove duplicate include in rawnand.h * BBT: - Skip bad blocks when searching for the BBT in NAND Raw NAND controller drivers: * Qcom: - Convert bindings to YAML - Use dma_mapping_error() for error check - Add missing nand_cleanup() in error path - Return actual error code instead of -ENODEV - Update last code word register - Add helper to configure location register - Rename parameter name in macro - Add helper to check last code word - Convert nandc to chip in Read/Write helper - Update register macro name for 0x2c offset * GPMI: - Fix a double free in gpmi_nand_init * Rockchip: - Use flexible-array member instead of zero-length array * Atmel: - Update ecc_stats.corrected counter * MXC: - Remove unneeded of_match_ptr() * R852: - replace spin_lock_irqsave by spin_lock in hard IRQ * Brcmnand: - Move to polling in pio mode on oops write - Read/write oob during EDU transfer - Fix OOB R/W with Hamming ECC * FSMC: - Fix error code in fsmc_nand_probe() * OMAP: - Use ECC information from the generic structures SPI-NAND core: * Add missing MODULE_DEVICE_TABLE() SPI-NAND drivers: * gigadevice: Support GD5F1GQ5UExxG
2021-04-15Merge tag 'spi-nor/for-5.13' of ↵Richard Weinberger1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - Add OTP support - Fix module unload while an op in progress - Add various cleanup patches SPI NOR controller drivers changes: - intel-spi: Move platform data header to x86 subfolder
2021-04-07mtd: rawnand: Add support for secure regions in NAND memoryManivannan Sadhasivam1-0/+14
On a typical end product, a vendor may choose to secure some regions in the NAND memory which are supposed to stay intact between FW upgrades. The access to those regions will be blocked by a secure element like Trustzone. So the normal world software like Linux kernel should not touch these regions (including reading). The regions are declared using a NAND chip DT property, "secure-regions". So let's make use of this property in the raw NAND core and skip access to the secure regions present in a system. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210402150128.29128-4-manivannan.sadhasivam@linaro.org
2021-04-02mtd: spi-nor: implement OTP support for Winbond and similar flashesMichael Walle1-0/+8
Use the new OTP ops to implement OTP access on Winbond flashes. Most Winbond flashes provides up to four different OTP regions ("Security Registers"). Winbond devices use a special opcode to read and write to the OTP regions, just like the RDSFDP opcode. In fact, it seems that the (undocumented) first OTP area of the newer flashes is the actual SFDP table. On a side note, Winbond devices also allow erasing the OTP regions as long as the area isn't locked down. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210321235140.8308-3-michael@walle.cc
2021-03-28include: linux: mtd: Remove duplicate include of nand.hWan Jiabing1-1/+0
linux/mtd/nand.h has been included at line 17. So we remove the duplicate one at line 21. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210323031737.259365-1-wanjiabing@vivo.com
2021-03-28mtd: add OTP (one-time-programmable) erase ioctlMichael Walle1-0/+3
This may sound like a contradiction but some SPI-NOR flashes really support erasing their OTP region until it is finally locked. Having the possibility to erase an OTP region might come in handy during development. The ioctl argument follows the OTPLOCK style. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210303201819.2752-1-michael@walle.cc
2021-03-28mtd: rawnand: remove duplicate include in rawnand.hZhang Yunkai1-1/+0
'linux/mtd/nand.h' included in 'rawnand.h' is duplicated. It is also included in the 17th line. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210313105702.365878-1-zhang.yunkai@zte.com.cn
2021-03-11mtd: char: Get rid of Big MTD LockAlexander Sverdlin1-0/+1
Get rid of central chrdev MTD lock, which prevents simultaneous operations on completely independent physical MTD chips. Replace it with newly introduced per-master mutex. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210217211845.43364-2-alexander.sverdlin@nokia.com
2021-03-11mtd: Add helper macro for register_mtd_blktrans boilerplateDejin Zheng1-0/+11
This patch introduces the module_mtd_blktrans macro which is a convenience macro for mtd blktrans modules similar to module_platform_driver. It is intended to be used by drivers which init/exit section does nothing but register/unregister the mtd blktrans driver. By using this macro it is possible to eliminate a few lines of boilerplate code per mtd blktrans driver. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210213164600.409061-2-zhengdejin5@gmail.com
2021-03-11mtd: nand: ecc-hamming: Use the public nsteps fieldMiquel Raynal1-2/+0
The software Hamming ECC engine stores the nsteps variable in its own private structure while it is also exported as a public ECC field. Let's get rid of the redundant private one and let's use the nand_ecc_context structure when possible. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd Torpedo Link: https://lore.kernel.org/linux-mtd/20210127203020.9574-10-miquel.raynal@bootlin.com
2021-03-11mtd: nand: ecc-bch: Use the public nsteps fieldMiquel Raynal1-2/+0
The software BCH ECC engine stores the nsteps variable in its own private structure while it is also exported as a public ECC field. Let's get rid of the redundant private one and let's use the nand_ecc_context structure when possible. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd Torpedo Link: https://lore.kernel.org/linux-mtd/20210127203020.9574-9-miquel.raynal@bootlin.com
2021-03-11mtd: nand: Add a helper to retrieve the number of ECC bytes per stepMiquel Raynal1-0/+10
This operation is very common and deserves a helper. It of course only works after the ECC engine initialization. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd Torpedo Link: https://lore.kernel.org/linux-mtd/20210127203020.9574-6-miquel.raynal@bootlin.com
2021-03-11mtd: nand: Add a helper to retrieve the number of ECC stepsMiquel Raynal1-0/+10
This operation is very common and deserves a helper. It of course only works after the ECC engine initialization. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd Torpedo Link: https://lore.kernel.org/linux-mtd/20210127203020.9574-5-miquel.raynal@bootlin.com
2021-03-11mtd: nand: Let ECC engines advertize the exact number of stepsMiquel Raynal1-0/+2
This is an information that might be useful for specific uses, so export it, which might avoid having to guess the number of steps when necessary. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd Torpedo Link: https://lore.kernel.org/linux-mtd/20210127203020.9574-2-miquel.raynal@bootlin.com
2021-02-05mtd: spi-nor: Add Global Block Unlock commandTudor Ambarus1-0/+1
The Global Block Unlock command has different names depending on the manufacturer, but always the same command value: 0x98. Macronix's MX25U12835F names it Gang Block Unlock, Winbond's W25Q128FV names it Global Block Unlock and Microchip's SST26VF064B names it Global Block Protection Unlock. Used in the Individual Block Protection mode, which is mutually exclusive with the Block Protection mode (BP0-3). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20210121110546.382633-1-tudor.ambarus@microchip.com
2020-12-16Merge tags 'spi-nor/for-5.11' and 'nand/for-5.11' into mtd/nextMiquel Raynal9-123/+286
SPI NOR core changes: - Initial support for stateful Octal DTR mode using volatile settings - Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards - Support for Cypress Semper flash - Support to specify ECC block size of SPI NOR flashes - Fixes to avoid clearing of non-volatile Block Protection bits at probe Generic NAND core: * ECC management: - Add an I/O request tweaking mechanism - Entire rework of the software BCH ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, migration to more generic prototypes, misc fixes and style cleanup. Moved now to the Generic NAND layer. - Entire rework of the software Hamming ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, misc renames, comment updates, cleanup, and style fixes. Moved now to the generic NAND layer. - Necessary plumbing at the NAND level to retrieve generic NAND ECC engines (softwares and on-die). - Update of the bindings. Raw NAND core: * Geting rid of the chip->ecc.priv entry. * Fix miscellaneous typos in kernel-doc Raw NAND controller drivers: * AU1550: Ensure the presence of the right includes * Davinci: Do not use extra dereferencing * GPMI: - Fix the driver only sense CS0 R/B issue - Fix the random DMA timeout issue - Use a single line for of_device_id - Use of_device_get_match_data() - Fix reference count leak in gpmi ops - Cleanup makefile - Fix binding matching of clocks on different SoCs * Ingenic: remove redundant get_device() in ingenic_ecc_get() * Intel LGM: New NAND controller driver * Marvell: Drop useless line * Meson: - Fix a resource leak in init - Fix meson_nfc_dma_buffer_release() arguments * mxc: - Use device_get_match_data() - Use a single line for of_device_id - Remove platform data support * Qcom: - Add support for SDX55 - Support for IPQ6018 QPIC NAND controller - Fix DMA sync on FLASH_STATUS register read * Rockchip: New NAND controller driver for RK3308, RK2928 and others * Sunxi: Add MDMA support SPI-NAND core: * Creation of a SPI-NAND on-die ECC engine * Move ECC related definitions earlier in the driver * Fix typo in comment * Fill a default ECC provider/algorithm * Remove outdated comment * Fix OOB read * Allow the case where there is no ECC engine * Use the external ECC engine logic SPI-NAND chip drivers: * Micron: - Add support for MT29F2G01AAAED - Use more specific names * Macronix: - Add support for MX35LFxG24AD - Add support for MX35LFxGE4AD Others: * onenand: Use mtd->oops_panic_write as condition * plat-ram: correctly free memory on error path in platram_probe()
2020-12-11mtd: rawnand: fix a kernel-doc markupMauro Carvalho Chehab1-1/+2
Some identifiers have different names between their prototypes and the kernel-doc markup. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/9ed47a57d12c40e73a9b01612ee119d39baa6236.1603469755.git.mchehab+huawei@kernel.org
2020-12-11mtd: nand: Add helpers to manage ECC engines and configurationsMiquel Raynal1-0/+4
Add the logic in the NAND core to find the right ECC engine depending on the NAND chip requirements and the user desires. Right now, the choice may be made between (more will come): * software Hamming * software BCH * on-die (SPI-NAND devices only) Once the ECC engine has been found, the ECC engine must be configured. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201001102014.20100-2-miquel.raynal@bootlin.com
2020-12-11mtd: nand: Let on-die ECC engines be retrieved from the NAND coreMiquel Raynal1-0/+1
Before making use of the ECC engines, we must retrieve them. Add the necessary boilerplate. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200930154109.3922-5-miquel.raynal@bootlin.com
2020-12-11mtd: spinand: Instantiate a SPI-NAND on-die ECC engineMiquel Raynal1-0/+9
Make use of the existing functions taken from the SPI-NAND core to instantiate an on-die ECC engine specific to the SPI-NAND core. The next step will be to tweak the core to use this object instead of calling the helpers directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200930154109.3922-4-miquel.raynal@bootlin.com
2020-12-11mtd: nand: Let software ECC engines be retrieved from the NAND coreMiquel Raynal1-0/+1
Before making use of the ECC engines, we must retrieve them. Add the boilerplate for the ones already available: software engines (Hamming and BCH). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-21-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-hamming: Create the software Hamming engineMiquel Raynal2-4/+21
Let's continue introducing the generic ECC engine abstraction in the NAND subsystem by instantiating a second ECC engine: software Hamming. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-20-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-hamming: Let the software Hamming ECC engine be unselectedMiquel Raynal1-0/+36
There is no reason to always embed the software Hamming ECC engine implementation. By default it is (with raw NAND), but we can let the user decide. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-19-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-hamming: Remove useless includesMiquel Raynal1-1/+0
Most of the includes are simply useless, drop them. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-18-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-hamming: Stop using raw NAND structuresMiquel Raynal2-0/+22
This code is meant to be reused by the SPI-NAND core. Now that the driver has been cleaned and reorganized, use a generic ECC engine object to store the driver's data instead of accessing members of the nand_chip structure. This means adding proper init/cleanup helpers. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-17-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-hamming: Rename the exported functionsMiquel Raynal2-24/+19
Prefix by ecc_sw_hamming_ the functions which should be internal only but are exported for "raw" operations. Prefix by nand_ecc_sw_hamming_ the other functions which will be used in the context of the declaration of an Hamming proper ECC engine object. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-16-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-hamming: Clarify the driver descriptionsMiquel Raynal1-1/+1
The include file pretends being the header for "ECC algorithm", while it is just the header for the Hamming implementation. Make this clear by rewording the sentence. Do the same with the module description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-13-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-hamming: Move Hamming code to the generic NAND layerMiquel Raynal2-4/+4
Hamming ECC code might be later re-used by the SPI NAND layer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-12-miquel.raynal@bootlin.com
2020-12-11mtd: rawnand: Get rid of chip->ecc.privMiquel Raynal1-2/+0
nand_ecc_ctrl embeds a private pointer which only has a meaning in the sunxi driver. This structure will soon be deprecated, but as this field is actually not needed, let's just drop it. Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-11-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-bch: Create the software BCH engineMiquel Raynal2-8/+17
Let's continue introducing the generic ECC engine abstraction in the NAND subsystem by instantiating a first ECC engine: the software BCH one. While at it, make a very tidy ecc_sw_bch_init() function and move all the sanity checks and user input management in nand_ecc_sw_bch_init_ctx(). This second helper will be called from the raw RAND core. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-10-miquel.raynal@bootlin.com
2020-12-07mtd: spi-nor: Fix multiple typosJonathan Neuschäfer1-1/+1
There are a few typos in comments in the SPI NOR framework; fix them. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201130152416.1283972-1-j.neuschaefer@gmx.net
2020-11-30mtd: nand: ecc-bch: Stop using raw NAND structuresMiquel Raynal1-0/+25
This code is meant to be reused by the SPI-NAND core. Now that the driver has been cleaned and reorganized, use a generic ECC engine object to store the driver's data instead of accessing members of the nand_chip structure. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-9-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Update the prototypes to be more genericMiquel Raynal2-29/+21
These functions must be usable by the main NAND core, so their names must be technology-agnostic as well as the parameters. Hence, we pass a generic nand_device instead of a raw nand_chip structure. As it seems that changing the raw NAND functions to always pass a generic NAND device is a lost of time, we prefer to create dedicated raw NAND wrappers that will be useful in the near future to do the translation. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-8-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Drop mtd_nand_has_bch()Miquel Raynal1-4/+0
Like for any other compilation option, use the IS_ENABLED() macro instead of hardcoding it. By droping this helper we can get rid of the BCH header in nandsim.c. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-7-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Return only valid error codesMiquel Raynal1-1/+1
When a function is not available, returning -ENOTSUPP makes much more sense than returning -1. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-6-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Stop exporting the private structureMiquel Raynal1-6/+5
The NAND BCH control structure has nothing to do outside of this driver, all users of the nand_bch_init/free() functions just save it to chip->ecc.priv so do it in this driver directly and return a regular error code instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-5-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Move BCH code to the generic NAND layerMiquel Raynal1-3/+3
BCH ECC code might be later re-used by the SPI NAND layer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-3-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc: Add an I/O request tweaking mechanismMiquel Raynal1-0/+32
Currently, BCH and Hamming engine are sharing the same tweaking/restoring I/O mechanism: they need the I/O request to fully cover the main/OOB area. Let's make this code generic as sharing the code between two drivers is already a win. Maybe other ECC engine drivers will need it too. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-2-miquel.raynal@bootlin.com
2020-11-09mtd: spi-nor: core: perform a Soft Reset on shutdownPratyush Yadav1-0/+2
Perform a Soft Reset on shutdown on flashes that support it so that the flash can be reset to its initial state and any configurations made by spi-nor (given that they're only done in volatile registers) will be reset. This will hand back the flash in pristine state for any further operations on it. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201005153138.6437-13-p.yadav@ti.com
2020-11-09mtd: spi-nor: add support for DTR protocolPratyush Yadav1-13/+38
Double Transfer Rate (DTR) is SPI protocol in which data is transferred on each clock edge as opposed to on each clock cycle. Make framework-level changes to allow supporting flashes in DTR mode. Right now, mixed DTR modes are not supported. So, for example a mode like 4S-4D-4D will not work. All phases need to be either DTR or STR. The xSPI spec says that "The program commands provide SPI backward compatible commands for programming data...". So 8D-8D-8D page program opcodes are populated with using 1S-1S-1S opcodes. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201005153138.6437-4-p.yadav@ti.com
2020-10-26treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches1-1/+1
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-11Merge tag 'cfi/for-5.10' of ↵Richard Weinberger1-0/+13
gitolite.kernel.org:pub/scm/linux/kernel/git/mtd/linux into mtd/next HyperBus changes * DMA support for TI's AM654 HyperBus controller driver. * HyperBus frontend driver for Renesas RPC-IF driver.
2020-10-11Merge tag 'nand/for-5.10' of ↵Richard Weinberger2-33/+189
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: * Use the new generic ECC object * Create helpers to set/extract the ECC requirements * Create a helper to extract the ECC configuration * Add a NAND page I/O request type * Introduce the ECC engine framework Raw NAND core changes: * Don't overwrite the error code from nand_set_ecc_soft_ops() * Introduce nand_set_ecc_on_host_ops() * Use the NAND framework user_conf object for ECC flags * Use the ECC framework user input parsing bits * Use the ECC framework nand_ecc_is_strong_enough() helper * Use the ECC framework OOB layouts * Make use of the ECC framework * Use nanddev_get/set_ecc_requirements() when relevant * Use the new ECC engine type enumeration * Separate the ECC engine type and the ECC byte placement * Move the nand_ecc_algo enum to the generic NAND layer * Rename the ECC algorithm enumeration items * Add a kernel doc to the ECC algorithm enumeration * DT bindings: - Document boolean NAND ECC properties - Document nand-ecc-engine - Document nand-ecc-placement Raw NAND drivers changes: * Ams-Delta: Fix non-OF build warning * Atmel: - Check return values for nand_read_data_op - Simplify with dev_err_probe() - Get rid of the legacy interface implementation - Convert the driver to exec_op() - Use nand_prog_page_end_op() - Use nand_{write,read}_data_op() - Drop redundant nand_read_page_op() - Enable the NFC controller at probe time - Disable clk on error handling path in probe * Cadence: remove a redundant dev_err call * Gpmi: - Simplify with dev_err_probe() * Marvell: - Fix and update kerneldoc - Simplify with dev_err_probe() - Fix and update kerneldoc - Simplify with dev_err_probe() - Support panic_write for mtdoops * Onenand: - Simplify the return expression of onenand_transfer_auto_oob - Simplify with dev_err_probe() * Oxnas: cleanup/simplify code * Pasemi: Make pasemi_device_ready() static * Qcom: Simplify with dev_err_probe() * Stm32_fmc2: fix a buffer overflow * Vf610: Remove unused function vf610_nfc_transfer_size() SPI-NAND changes: * Use nanddev_get_ecc_conf() when relevant * Gigadevice: - Add support for GD5F4GQ4xC - Add QE Bit - Use only one dummy byte in QUADIO * Macronix: - Add support for MX31UF1GE4BC - Add support for MX31LF1GE4BC
2020-10-06mtd: hyperbus: add Renesas RPC-IF driverSergei Shtylyov1-0/+11
Add the HyperFLash driver for the Renesas RPC-IF. It's the "front end" driver using the "back end" APIs in the main driver to talk to the real hardware. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/78abb851-2beb-fe7d-87e5-ce58ee877d35@gmail.com
2020-09-30mtd: rawnand: Use the NAND framework user_conf object for ECC flagsMiquel Raynal1-1/+0
Instead of storing the ECC flags in chip->ecc.options, use nanddev->ecc.user_conf.flags. There is currently only one to save: NAND_ECC_MAXIMIZE. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-21-miquel.raynal@bootlin.com
2020-09-30mtd: rawnand: Use the ECC framework user input parsing bitsMiquel Raynal1-12/+0
Many helpers are generic to all NAND chips, they should not be raw-NAND specific, so use the generic ones. To avoid moving all the raw NAND core "history" into the generic NAND layer, we keep a part of this parsing in the raw NAND core to ensure backward compatibility. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-20-miquel.raynal@bootlin.com
2020-09-30mtd: rawnand: Use the ECC framework OOB layoutsMiquel Raynal1-3/+1
No need to have our own in the raw NAND core. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-18-miquel.raynal@bootlin.com
2020-09-30mtd: hyperbus: Provide per device private pointerVignesh Raghavendra1-0/+2
Provide per device private pointer that can be used by controller drivers to store device specific private data. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200924081214.16934-2-vigneshr@ti.com
2020-09-28mtd: nand: Use the new generic ECC objectMiquel Raynal1-7/+7
Embed a generic NAND ECC high-level object in the nand_device structure to carry all the ECC engine configuration/data. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-16-miquel.raynal@bootlin.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-11 01:10:33 +0300