Age | Commit message (Collapse) | Author | Files | Lines |
|
When the client is required to use TEST_STATEID to discover which
delegation(s) have been revoked, it may continually test delegations at the
head of the list if the server continues to be unsatisfied and send
SEQ4_STATUS_RECALLABLE_STATE_REVOKED. For a large number of delegations
this behavior is prone to live-lock because the client may never be able to
test and free revoked state at the end of the list since the
SEQ4_STATUS_RECALLABLE_STATE_REVOKED will cause us to flag delegations at
the head of the list to be tested. This problem is further exacerbated by
the state manager's willingness to be scheduled out on a busy system while
testing the list of delegations.
Keep a generation counter for each attempt to test all delegations, and
skip delegations that have already been tested in the current pass.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Torkil Svensgaard <torkil@drcmr.dk>
Tested-by: Ruben Vestergaard <rubenv@drcmr.dk>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Currently, when GETDEVICEINFO returns multiple locations where each
is a different IP but the server's identity is same as MDS, then
nfs4_set_ds_client() finds the existing nfs_client structure which
has the MDS's max_connect value (and if it's 1), then the 1st IP
on the DS's list will get dropped due to MDS trunking rules. Other
IPs would be added as they fall under the pnfs trunking rules.
For the list of IPs the 1st goes thru calling nfs4_set_ds_client()
which will eventually call nfs4_add_trunk() and call into
rpc_clnt_test_and_add_xprt() which has the check for MDS trunking.
The other IPs (after the 1st one), would call rpc_clnt_add_xprt()
which doesn't go thru that check.
nfs4_add_trunk() is called when MDS trunking is happening and it
needs to enforce the usage of max_connect mount option of the
1st mount. However, this shouldn't be applied to pnfs flow.
Instead, this patch proposed to treat MDS=DS as DS trunking and
make sure that MDS's max_connect limit does not apply to the
1st IP returned in the GETDEVICEINFO list. It does so by
marking the newly created client with a new flag NFS_CS_PNFS
which then used to pass max_connect value to use into the
rpc_clnt_test_and_add_xprt() instead of the existing rpc
client's max_connect value set by the MDS connection.
For example, mount was done without max_connect value set
so MDS's rpc client has cl_max_connect=1. Upon calling into
rpc_clnt_test_and_add_xprt() and using rpc client's value,
the caller passes in max_connect value which is previously
been set in the pnfs path (as a part of handling
GETDEVICEINFO list of IPs) in nfs4_set_ds_client().
However, when NFS_CS_PNFS flag is not set and we know we
are doing MDS trunking, comparing a new IP of the same
server, we then set the max_connect value to the
existing MDS's value and pass that into
rpc_clnt_test_and_add_xprt().
Fixes: dc48e0abee24 ("SUNRPC enforce creation of no more than max_connect xprts")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Within each nfs_server sysfs tree, add an entry named "shutdown". Writing
1 to this file will set the cl_shutdown bit on the rpc_clnt structs
associated with that mount. If cl_shutdown is set, the task scheduler
immediately returns -EIO for new tasks.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Create a sysfs directory for each mount that corresponds to the mount's
nfs_server struct. As the mount is being constructed, use the name
"server-n", but rename it to the "MAJOR:MINOR" of the mount after assigning
a device_id. The rename approach allows us to populate the mount's directory
with links to the various rpc_client objects during the mount's
construction. The naming convention (MAJOR:MINOR) can be used to reference
a particular NFS mount's sysfs tree.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The new field is used to match struct nfs_clients that have the same
TLS policy setting.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Mark async operations such as RENAME, REMOVE, COMMIT MOVEABLE
for the nfsv4.1+ sessions.
Fixes: 85e39feead948 ("NFSv4.1 identify and mark RPC tasks that can move between transports")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- Switch NFS to use readahead instead of the obsolete readpages.
- Readdir fixes to improve cacheability of large directories when
there are multiple readers and writers.
- Readdir performance improvements when doing a seekdir() immediately
after opening the directory (common when re-exporting NFS).
- NFS swap improvements from Neil Brown.
- Loosen up memory allocation to permit direct reclaim and write back
in cases where there is no danger of deadlocking the writeback code
or NFS swap.
- Avoid sillyrename when the NFSv4 server claims to support the
necessary features to recover the unlinked but open file after
reboot.
Bugfixes:
- Patch from Olga to add a mount option to control NFSv4.1 session
trunking discovery, and default it to being off.
- Fix a lockup in nfs_do_recoalesce().
- Two fixes for list iterator variables being used when pointing to
the list head.
- Fix a kernel memory scribble when reading from a non-socket
transport in /sys/kernel/sunrpc.
- Fix a race where reconnecting to a server could leave the TCP
socket stuck forever in the connecting state.
- Patch from Neil to fix a shutdown race which can leave the SUNRPC
transport timer primed after we free the struct xprt itself.
- Patch from Xin Xiong to fix reference count leaks in the NFSv4.2
copy offload.
- Sunrpc patch from Olga to avoid resending a task on an offlined
transport.
Cleanups:
- Patches from Dave Wysochanski to clean up the fscache code"
* tag 'nfs-for-5.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (91 commits)
NFSv4/pNFS: Fix another issue with a list iterator pointing to the head
NFS: Don't loop forever in nfs_do_recoalesce()
SUNRPC: Don't return error values in sysfs read of closed files
SUNRPC: Do not dereference non-socket transports in sysfs
NFSv4.1: don't retry BIND_CONN_TO_SESSION on session error
SUNRPC don't resend a task on an offlined transport
NFS: replace usage of found with dedicated list iterator variable
SUNRPC: avoid race between mod_timer() and del_timer_sync()
pNFS/files: Ensure pNFS allocation modes are consistent with nfsiod
pNFS/flexfiles: Ensure pNFS allocation modes are consistent with nfsiod
NFSv4/pnfs: Ensure pNFS allocation modes are consistent with nfsiod
NFS: Avoid writeback threads getting stuck in mempool_alloc()
NFS: nfsiod should not block forever in mempool_alloc()
SUNRPC: Make the rpciod and xprtiod slab allocation modes consistent
SUNRPC: Fix unx_lookup_cred() allocation
NFS: Fix memory allocation in rpc_alloc_task()
NFS: Fix memory allocation in rpc_malloc()
SUNRPC: Improve accuracy of socket ENOBUFS determination
SUNRPC: Replace internal use of SOCKWQ_ASYNC_NOSPACE
SUNRPC: Fix socket waits for write buffer space
...
|
|
The bdi congestion tracking in not widely used and will be removed.
NFS is one of a small number of filesystems that uses it, setting just
the async (write) congestion flag at what it determines are appropriate
times.
The only remaining effect of the async flag is to cause (some)
WB_SYNC_NONE writes to be skipped.
So instead of setting the flag, set an internal flag and change:
- .writepages to do nothing if WB_SYNC_NONE and the flag is set
- .writepage to return AOP_WRITEPAGE_ACTIVATE if WB_SYNC_NONE and the
flag is set.
The writepages change causes a behavioural change in that pageout() can
now return PAGE_ACTIVATE instead of PAGE_KEEP, so SetPageActive() will be
called on the page which (I think) wil further delay the next attempt at
writeout. This might be a good thing.
Link: https://lkml.kernel.org/r/164549983738.9187.3972219847989393182.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce a new mount option -- trunkdiscovery,notrunkdiscovery -- to
toggle whether or not the client will engage in actively discovery
of trunking locations.
v2 make notrunkdiscovery default
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: 1976b2b31462 ("NFSv4.1 query for fs_location attr on a new file system")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Basic handling for case insensitive filesystems
- Initial support for fs_locations and server trunking
Bugfixes and Cleanups:
- Cleanups to how the "struct cred *" is handled for the
nfs_access_entry
- Ensure the server has an up to date ctimes before hardlinking or
renaming
- Update 'blocks used' after writeback, fallocate, and clone
- nfs_atomic_open() fixes
- Improvements to sunrpc tracing
- Various null check & indenting related cleanups
- Some improvements to the sunrpc sysfs code:
- Use default_groups in kobj_type
- Fix some potential races and reference leaks
- A few tracepoint cleanups in xprtrdma"
[ This should have gone in during the merge window, but didn't. The
original pull request - sent during the merge window - had gotten
marked as spam and discarded due missing DKIM headers in the email
from Anna. - Linus ]
* tag 'nfs-for-5.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (35 commits)
SUNRPC: Don't dereference xprt->snd_task if it's a cookie
xprtrdma: Remove definitions of RPCDBG_FACILITY
xprtrdma: Remove final dprintk call sites from xprtrdma
sunrpc: Fix potential race conditions in rpc_sysfs_xprt_state_change()
net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change
NFSv4.1 test and add 4.1 trunking transport
SUNRPC allow for unspecified transport time in rpc_clnt_add_xprt
NFSv4 handle port presence in fs_location server string
NFSv4 expose nfs_parse_server_name function
NFSv4.1 query for fs_location attr on a new file system
NFSv4 store server support for fs_location attribute
NFSv4 remove zero number of fs_locations entries error check
NFSv4: nfs_atomic_open() can race when looking up a non-regular file
NFSv4: Handle case where the lookup of a directory fails
NFSv42: Fallocate and clone should also request 'blocks used'
NFSv4: Allow writebacks to request 'blocks used'
SUNRPC: use default_groups in kobj_type
NFS: use default_groups in kobj_type
NFS: Fix the verifier for case sensitive filesystem in nfs_atomic_open()
NFS: Add a helper to remove case-insensitive aliases
...
|
|
Define and store if server returns it supports fs_locations attribute
as a capability.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Change the nfs filesystem to support fscache's indexing rewrite and
reenable caching in nfs.
The following changes have been made:
(1) The fscache_netfs struct is no more, and there's no need to register
the filesystem as a whole.
(2) The session cookie is now an fscache_volume cookie, allocated with
fscache_acquire_volume(). That takes three parameters: a string
representing the "volume" in the index, a string naming the cache to
use (or NULL) and a u64 that conveys coherency metadata for the
volume.
For nfs, I've made it render the volume name string as:
"nfs,<ver>,<family>,<address>,<port>,<fsidH>,<fsidL>*<,param>[,<uniq>]"
(3) The fscache_cookie_def is no more and needed information is passed
directly to fscache_acquire_cookie(). The cache no longer calls back
into the filesystem, but rather metadata changes are indicated at
other times.
fscache_acquire_cookie() is passed the same keying and coherency
information as before.
(4) fscache_enable/disable_cookie() have been removed.
Call fscache_use_cookie() and fscache_unuse_cookie() when a file is
opened or closed to prevent a cache file from being culled and to keep
resources to hand that are needed to do I/O.
If a file is opened for writing, we invalidate it with
FSCACHE_INVAL_DIO_WRITE in lieu of doing writeback to the cache,
thereby making it cease caching until all currently open files are
closed. This should give the same behaviour as the uptream code.
Making the cache store local modifications isn't straightforward for
NFS, so that's left for future patches.
(5) fscache_invalidate() now needs to be given uptodate auxiliary data and
a file size. It also takes a flag to indicate if this was due to a
DIO write.
(6) Call nfs_fscache_invalidate() with FSCACHE_INVAL_DIO_WRITE on a file
to which a DIO write is made.
(7) Call fscache_note_page_release() from nfs_release_page().
(8) Use a killable wait in nfs_vm_page_mkwrite() when waiting for
PG_fscache to be cleared.
(9) The functions to read and write data to/from the cache are stubbed out
pending a conversion to use netfslib.
Changes
=======
ver #3:
- Added missing =n fallback for nfs_fscache_release_file()[1][2].
ver #2:
- Use gfpflags_allow_blocking() rather than using flag directly.
- fscache_acquire_volume() now returns errors.
- Remove NFS_INO_FSCACHE as it's no longer used.
- Need to unuse a cookie on file-release, not inode-clear.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Co-developed-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna.schumaker@netapp.com>
cc: linux-nfs@vger.kernel.org
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/202112100804.nksO8K4u-lkp@intel.com/ [1]
Link: https://lore.kernel.org/r/202112100957.2oEDT20W-lkp@intel.com/ [2]
Link: https://lore.kernel.org/r/163819668938.215744.14448852181937731615.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906979003.143852.2601189243864854724.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967182112.1823006.7791504655391213379.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021575950.640689.12069642327533368467.stgit@warthog.procyon.org.uk/ # v4
|
|
Add capabilities to allow the NFS client to recognise when it is dealing
with case insensitive and case preserving filesystems.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This option will control up to how many xprts can the client
establish to the server with a distinct address (that means
nconnect connections are not counted towards this new limit).
This patch is setting up nfs structures to keeep track of the
max_connect limit (does not enforce it).
The default value is kept at 1 so that no current mounts that
don't want any additional connections would be effected. The
maximum value is set at 16.
Mounts to DS are not limited to default value of 1 but instead
set to the maximum default value of 16 (NFS_MAX_TRANSPORTS).
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Add validation of the UDP retrans parameter to prevent shift
out-of-bounds
- Don't discard pNFS layout segments that are marked for return
Bugfixes:
- Fix a NULL dereference crash in xprt_complete_bc_request() when the
NFSv4.1 server misbehaves.
- Fix the handling of NFS READDIR cookie verifiers
- Sundry fixes to ensure attribute revalidation works correctly when
the server does not return post-op attributes.
- nfs4_bitmask_adjust() must not change the server global bitmasks
- Fix major timeout handling in the RPC code.
- NFSv4.2 fallocate() fixes.
- Fix the NFSv4.2 SEEK_HOLE/SEEK_DATA end-of-file handling
- Copy offload attribute revalidation fixes
- Fix an incorrect filehandle size check in the pNFS flexfiles driver
- Fix several RDMA transport setup/teardown races
- Fix several RDMA queue wrapping issues
- Fix a misplaced memory read barrier in sunrpc's call_decode()
Features:
- Micro optimisation of the TCP transmission queue using TCP_CORK
- statx() performance improvements by further splitting up the
tracking of invalid cached file metadata.
- Support the NFSv4.2 'change_attr_type' attribute and use it to
optimise handling of change attribute updates"
* tag 'nfs-for-5.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (85 commits)
xprtrdma: Fix a NULL dereference in frwr_unmap_sync()
sunrpc: Fix misplaced barrier in call_decode
NFSv4.2: Remove ifdef CONFIG_NFSD from NFSv4.2 client SSC code.
xprtrdma: Move fr_mr field to struct rpcrdma_mr
xprtrdma: Move the Work Request union to struct rpcrdma_mr
xprtrdma: Move fr_linv_done field to struct rpcrdma_mr
xprtrdma: Move cqe to struct rpcrdma_mr
xprtrdma: Move fr_cid to struct rpcrdma_mr
xprtrdma: Remove the RPC/RDMA QP event handler
xprtrdma: Don't display r_xprt memory addresses in tracepoints
xprtrdma: Add an rpcrdma_mr_completion_class
xprtrdma: Add tracepoints showing FastReg WRs and remote invalidation
xprtrdma: Avoid Send Queue wrapping
xprtrdma: Do not wake RPC consumer on a failed LocalInv
xprtrdma: Do not recycle MR after FastReg/LocalInv flushes
xprtrdma: Clarify use of barrier in frwr_wc_localinv_done()
xprtrdma: Rename frwr_release_mr()
xprtrdma: rpcrdma_mr_pop() already does list_del_init()
xprtrdma: Delete rpcrdma_recv_buffer_put()
xprtrdma: Fix cwnd update ordering
...
|
|
Fix up a static compiler warning:
"fs/nfs/nfs4proc.c:3882 _nfs4_server_capabilities() warn: was expecting
a 64 bit value instead of '(1 << 11)'"
The fix is to convert the fattr_valid field to match the type of the
'valid' field in struct nfs_fattr.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
There are lots of attributes, and they are crowding out the bit space.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The change_attr_type allows the server to provide a description of how
the change attribute will behave. This again will allow the client to
optimise its behaviour w.r.t. attribute revalidation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Keep track of whether or not there were LSM security context
options passed during mount (ie creation of the superblock).
Then, while deciding if the superblock can be shared for the new
mount, check if the newly passed in LSM security context options
are compatible with the existing superblock's ones by calling
security_sb_mnt_opts_compat().
Previously, with selinux enabled, NFS wasn't able to do the
following 2mounts:
mount -o vers=4.2,sec=sys,context=system_u:object_r:root_t:s0
<serverip>:/ /mnt
mount -o vers=4.2,sec=sys,context=system_u:object_r:swapfile_t:s0
<serverip>:/scratch /scratch
2nd mount would fail with "mount.nfs: an incorrect mount option was
specified" and var log messages would have:
"SElinux: mount invalid. Same superblock, different security
settings for.."
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Support eager writing to the server, meaning that we write the data to
cache on the server, and wait for that to complete. This ensures that we
see ENOSPC errors immediately.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The mount flags are all unsigned integers, so we should not be storing
them in a signed field.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This patch adds client support for decoding a single NFS4_CONTENT_DATA
segment returned by the server. This is the simplest implementation
possible, since it does not account for any hole segments in the reply.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Query the server for extended attribute support, and record it
as the NFS_CAP_XATTR flag in the server capabilities.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Set limits for extended attributes (attribute value size and listxattr
buffer size), based on the fs-independent limits (XATTR_*_MAX).
Define the maximum XDR sizes for the RFC 8276 XATTR operations.
In the case of operations that carry a larger payload (SETXATTR,
GETXATTR, LISTXATTR), these exclude that payload, which is added
as separate pages, like other operations do.
Define, much like for read and write operations, the maximum overhead
sizes for get/set/listxattr, and use them to limit the maximum payload
size for those operations, in combination with the channel attributes.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Add a mount option 'softreval' that allows attribute revalidation 'getattr'
calls to time out, and causes them to fall back to using the cached
attributes.
The use case for this option is for ensuring that we can still (slowly)
traverse paths and use cached information even when the server is down.
Once the server comes back up again, the getattr calls start succeeding,
and the caches will revalidate as usual.
The 'softreval' mount option is automatically enabled if you have
specified 'softerr'. It can be turned off using the options
'nosoftreval', or 'hard'.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
|
|
NFSv2, v3 and NFSv4 servers often have duplicate replay caches that look
at the source port when deciding whether or not an RPC call is a replay
of a previous call. This requires clients to perform strange TCP gymnastics
in order to ensure that when they reconnect to the server, they bind
to the same source port.
NFSv4.1 and NFSv4.2 have sessions that provide proper replay semantics,
that do not look at the source port of the connection. This patch therefore
ensures they can ignore the rebind requirement.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If a NFSv3 server is being used as both a DS and as a regular NFSv3 server,
we may want to keep the IO traffic on a separate TCP connection, since
it will typically have very different timeout characteristics.
This patch therefore sets up a flag to separate the two modes of operation
for the nfs_client.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Add a flag to tell the nfs_client it should set RPC_CLNT_CREATE_NOPING when
creating the rpc client.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
NFSv4 supports 64-bit times, so we should switch to using struct
timespec64 when decoding attributes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Try using the delegation stateid, then the open stateid.
Only NL4_NETATTR, No support for NL4_NAME and NL4_URL.
Allow only one source server address to be returned for now.
To distinguish between same server copy offload ("intra") and
a copy between different server ("inter"), do a check of server
owner identity and also make sure server is capable of doing
a copy offload.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
|
|
If the user specifies the -onconn=<number> mount option, and the transport
protocol is TCP, then set up <number> connections to the server. The
connections will all go to the same IP address.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Store the credential of the mount process so that we can determine
information such as the user namespace.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Add a mount option that exposes the ETIMEDOUT errors that occur during
soft timeouts to the application. This allows aware applications to
distinguish between server disk IO errors and client timeout errors.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When the label says "for internal use only", then it doesn't belong
in the 'uapi' subtree.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When NFS creates a machine credential, it is a "generic" credential,
not tied to any auth protocol, and is really just a container for
the princpal name.
This doesn't get linked to a genuine credential until rpcauth_bindcred()
is called.
The lookup always succeeds, so various places that test if the machine
credential is NULL, are pointless.
As a step towards getting rid of generic credentials, this patch gets
rid of generic machine credentials. The nfs_client and rpc_client
just hold a pointer to a constant principal name.
When a machine credential is wanted, a special static 'struct rpc_cred'
pointer is used. rpcauth_bindcred() recognizes this, finds the
principal from the client, and binds the correct credential.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
NFSv4 state management tries a root credential when no machine
credential is available, as can happen with kerberos.
It does this by replacing the cl_machine_cred with a root credential.
This means that any user of the machine credential needs to take
a lock while getting a reference to the machine credential, which is
a little cumbersome.
So introduce an explicit cl_root_cred, and never free either
credential until client shutdown. This means that no locking
is needed to reference these credentials. Future patches
will make use of this.
This is only a temporary addition. both cl_machine_cred and
cl_root_cred will disappear later in the series.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When the server fails to return post-op attributes, the client's
attempt to place read data directly in the page cache fails, and
so we have to do an extra copy in order to realign the data with
page borders.
This patch attempts to detect servers that don't return post-op
attributes on read (e.g. for pNFS) and adjusts the placement
calculation accordingly.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
It's possible that server replies back with CB_OFFLOAD call and
COPY reply at the same time such that client will process
CB_OFFLOAD before reply to COPY. For that keep a list of pending
callback stateids received and then before waiting on completion
check the pending list.
Cleanup any pending copies on the client shutdown.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Change xdr to always send COPY asynchronously.
Keep the list copies send in a list under a server structure.
Once copy is sent, it waits on a completion structure that will
be signalled by the callback thread that receives CB_OFFLOAD.
If CB_OFFLOAD returned an error and even if it returned partial
bytes, ignore them (as we can't commit without a verifier to
match) and return an error.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Even if the results of the permissions checks failed, we should parse
the results of the layout on open call so that we can return the
layout if required.
Note that we also want to ignore the sequence counter for whether or not
a layout recall occurred. If the recall pertained to our OPEN, then the
callback will know, and will attempt to wait for us to finih processing
anyway.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Since the LAYOUTGET on OPEN can be sent without prior inode information,
existing methods to prevent LAYOUTGET from being sent while processing
CB_LAYOUTRECALL don't work. Track if a recall occurred while LAYOUTGET
was being sent, and if so ignore the results.
Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Revalidate "." and ".." correctly on open
- Avoid RCU usage in tracepoints
- Fix ugly referral attributes
- Fix a typo in nomigration mount option
- Revert "NFS: Move the flock open mode check into nfs_flock()"
Features:
- Implement a stronger send queue accounting system for NFS over RDMA
- Switch some atomics to the new refcount_t type
Other bugfixes and cleanups:
- Clean up access mode bits
- Remove special-case revalidations in nfs_opendir()
- Improve invalidating NFS over RDMA memory for async operations that
time out
- Handle NFS over RDMA replies with a worqueue
- Handle NFS over RDMA sends with a workqueue
- Fix up replaying interrupted requests
- Remove dead NFS over RDMA definitions
- Update NFS over RDMA copyright information
- Be more consistent with bool initialization and comparisons
- Mark expected switch fall throughs
- Various sunrpc tracepoint cleanups
- Fix various OPEN races
- Fix a typo in nfs_rename()
- Use common error handling code in nfs_lock_and_join_request()
- Check that some structures are properly cleaned up during
net_exit()
- Remove net pointer from dprintk()s"
* tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (62 commits)
NFS: Revert "NFS: Move the flock open mode check into nfs_flock()"
NFS: Fix typo in nomigration mount option
nfs: Fix ugly referral attributes
NFS: super: mark expected switch fall-throughs
sunrpc: remove net pointer from messages
nfs: remove net pointer from messages
sunrpc: exit_net cleanup check added
nfs client: exit_net cleanup check added
nfs/write: Use common error handling code in nfs_lock_and_join_requests()
NFSv4: Replace closed stateids with the "invalid special stateid"
NFSv4: nfs_set_open_stateid must not trigger state recovery for closed state
NFSv4: Check the open stateid when searching for expired state
NFSv4: Clean up nfs4_delegreturn_done
NFSv4: cleanup nfs4_close_done
NFSv4: Retry NFS4ERR_OLD_STATEID errors in layoutreturn
pNFS: Retry NFS4ERR_OLD_STATEID errors in layoutreturn-on-close
NFSv4: Don't try to CLOSE if the stateid 'other' field has changed
NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.
NFS: Fix a typo in nfs_rename()
NFSv4: Fix open create exclusive when the server reboots
...
|
|
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nfs_client.cl_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Transparent State Migration copies a client's lease state from the
server where a filesystem used to reside to the server where it now
resides. When an NFSv4.1 client first contacts that destination
server, it uses EXCHANGE_ID to detect trunking relationships.
The lease that was copied there is returned to that client, but the
destination server sets EXCHGID4_FLAG_CONFIRMED_R when replying to
the client. This is because the lease was confirmed on the source
server (before it was copied).
Normally, when CONFIRMED_R is set, a client purges the lease and
creates a new one. However, that throws away the entire benefit of
Transparent State Migration.
Therefore, the client must not purge that lease when it is possible
that Transparent State Migration has occurred.
Reported-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix use after free in write error path
- Use GFP_NOIO for two allocations in writeback
- Fix a hang in OPEN related to server reboot
- Check the result of nfs4_pnfs_ds_connect
- Fix an rcu lock leak
Features:
- Removal of the unmaintained and unused OSD pNFS layout
- Cleanup and removal of lots of unnecessary dprintk()s
- Cleanup and removal of some memory failure paths now that GFP_NOFS
is guaranteed to never fail.
- Remove the v3-only data server limitation on pNFS/flexfiles
Bugfixes:
- RPC/RDMA connection handling bugfixes
- Copy offload: fixes to ensure the copied data is COMMITed to disk.
- Readdir: switch back to using the ->iterate VFS interface
- File locking fixes from Ben Coddington
- Various use-after-free and deadlock issues in pNFS
- Write path bugfixes"
* tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (89 commits)
pNFS/flexfiles: Always attempt to call layoutstats when flexfiles is enabled
NFSv4.1: Work around a Linux server bug...
NFS append COMMIT after synchronous COPY
NFSv4: Fix exclusive create attributes encoding
NFSv4: Fix an rcu lock leak
nfs: use kmap/kunmap directly
NFS: always treat the invocation of nfs_getattr as cache hit when noac is on
Fix nfs_client refcounting if kmalloc fails in nfs4_proc_exchange_id and nfs4_proc_async_renew
NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION
pNFS: Fix NULL dereference in pnfs_generic_alloc_ds_commits
pNFS: Fix a typo in pnfs_generic_alloc_ds_commits
pNFS: Fix a deadlock when coalescing writes and returning the layout
pNFS: Don't clear the layout return info if there are segments to return
pNFS: Ensure we commit the layout if it has been invalidated
pNFS: Don't send COMMITs to the DSes if the server invalidated our layout
pNFS/flexfiles: Fix up the ff_layout_write_pagelist failure path
pNFS: Ensure we check layout validity before marking it for return
NFS4.1 handle interrupted slot reuse from ERR_DELAY
NFSv4: check return value of xdr_inline_decode
nfs/filelayout: fix NULL pointer dereference in fl_pnfs_update_layout()
...
|