summaryrefslogtreecommitdiff
path: root/include/linux/of_gpio.h
AgeCommit message (Collapse)AuthorFilesLines
2023-03-06gpiolib: split of_mm_gpio_chip out of linux/of_gpio.hArnd Bergmann1-21/+0
This is a rarely used feature that has nothing to do with the client-side of_gpio.h. Split it out with a separate header file and Kconfig option so it can be removed on its own timeline aside from removing the of_gpio consumer interfaces. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-01-30gpiolib: of: Move enum of_gpio_flags to its only userAndy Shevchenko1-15/+0
GPIO library for OF is the only user for enum of_gpio_flags. Move it there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: Remove unused of_mm_gpiochip_add()Andy Shevchenko1-5/+0
of_mm_gpiochip_add() is unused API, remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: of: remove of_get_gpio[_flags]() and of_get_named_gpio_flags()Dmitry Torokhov1-41/+4
There are no more users of these APIs in the mainline kernel, remove them. This leaves of_get_named_gpio() as the only legacy OF-specific API. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: of: stop exporting of_gpio_named_count()Dmitry Torokhov1-26/+0
The only user of this function is gpiolib-of.c so move it there. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: of: remove of_gpio_count()Dmitry Torokhov1-11/+0
There are no more users of of_gpio_count() in the mainline kernel, remove it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-28gpio: Do not include <linux/kernel.h> when not really needed.Christophe JAILLET1-1/+1
<linux/kernel.h> is included only for using container_of(). Include <linux/container_of.h> instead, it is much lighter. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-07-19gpiolib: of: support bias pull disableNuno Sá1-0/+1
On top of looking at PULL_UP and PULL_DOWN flags, also look at PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then pass down this to controllers that support it. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-08-05gpiolib: constify passed device_node pointerKrzysztof Kozlowski1-7/+8
Several gpiolib functions receive pointer to struct device_node which is later passed to OF functions. These OF functions accept already pointer to const, so gpiolib can follow similar approach to indicate they are not modifying the struct device_node. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-02-10gpio: Avoid kernel.h inclusion where it's possibleAndy Shevchenko1-3/+6
Inclusion of kernel.h increases the mess with the header dependencies. Avoid kernel.h inclusion where it's possible. Besides that, clean up a bit other inclusions inside GPIO subsystem headers. It includes: - removal pin control bits (forward declaration and header) from linux/gpio.h - removal of.h from asm-generic/gpio.h - use of explicit headers in gpio/consumer.h - add FIXME note with regard to gpio.h inclusion in of_gpio,h Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200205134336.20197-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11gpio: of: Make of_gpio_simple_xlate() privateGeert Uytterhoeven1-11/+0
Since commit 9a95e8d25a140ba9 ("gpio: remove etraxfs driver"), there are no more users of of_gpio_simple_xlate() outside gpiolib-of.c. All GPIO drivers that need it now rely on of_gpiochip_add() setting it up as the default translate function. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190906084539.21838-3-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13gpio: add core support for pull-up/pull-down configurationThomas Petazzoni1-0/+2
This commit adds support for configuring the pull-up and pull-down resistors available in some GPIO controllers. While configuring pull-up/pull-down is already possible through the pinctrl subsystem, some GPIO controllers, especially simple ones such as GPIO expanders on I2C, don't have any pinmuxing capability and therefore do not use the pinctrl subsystem. This commit implements the GPIO_PULL_UP and GPIO_PULL_DOWN flags, which can be used from the Device Tree, to enable a pull-up or pull-down resistor on a given GPIO. The flag is simply propagated all the way to the core GPIO subsystem, where it is used to call the gpio_chip ->set_config callback with the appropriate existing PIN_CONFIG_BIAS_* values. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-01Merge tag 'devicetree-for-4.16' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Convert to use memblock_virt_alloc in DT code which supports bootmem arches. With this we can remove the arch specific early_init_dt_alloc_memory_arch() functions. - Enable running the DT unittests on UML - Use SPDX license tags on DT files - Fix early FDT kconfig ifdef logic - Clean-up unittest Makefile - Fix function comment for of_irq_parse_raw - Add missing documentation for linux,initrd-{start,end} properties - Clean-up of binding examples using uppercase hex - Add trivial devices W83773G and Infineon TLV493D-A1B6 - Add missing STM32 SoC bindings - Various small binding doc fixes * tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits) xtensa: remove arch specific early DT functions x86: remove arch specific early_init_dt_alloc_memory_arch nios2: remove arch specific early_init_dt_alloc_memory_arch mips: remove arch specific early_init_dt_alloc_memory_arch metag: remove arch specific early DT functions cris: remove arch specific early DT functions libfdt: remove unnecessary include directive from <linux/libfdt.h> of: unittest: refactor Makefile of/fdt: use memblock_virt_alloc for early alloc of: Use SPDX license tag for DT files of/fdt: Fix #ifdef dependency of early flattree declarations dt-bindings: h8300 clocksource: correct spelling of pulse dt-bindings: imx6q-pcie: Add required property for i.MX6SX mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding dt-bindings: Use lower case hex in unit-addresses dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000 dt-bindings: Add Infineon TLV493D-A1B6 dt-bindings: mailbox: ti,message-manager: Fix interrupt name error dt-bindings: chosen: Document linux,initrd-{start,end} dt-bindings: arm: document supported STM32 SoC family ...
2018-01-08of: Use SPDX license tag for DT filesRob Herring1-5/+1
Convert remaining DT files to use SPDX-License-Identifier tags. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-03gpio: gpiolib: Generalise state persistence beyond sleepAndrew Jeffery1-1/+1
General support for state persistence is added to gpiolib with the introduction of a new pinconf parameter to propagate the request to hardware. The existing persistence support for sleep is adapted to include hardware support if the GPIO driver provides it. Persistence continues to be enabled by default; in-kernel consumers can opt out, but userspace (currently) does not have a choice. The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are renamed, dropping the SLEEP prefix to reflect that the concept is no longer sleep-specific. I feel that renaming to just *_MAY_LOSE_VALUE could initially be misinterpreted, so I've further changed the symbols to *_TRANSITORY and *_PERSISTENT to address this. The sysfs interface is modified only to keep consistency with the chardev interface in enforcing persistence for userspace exports. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-20gpio: Fix loose spellingAndrew Jeffery1-1/+1
Literally. I expect "lose" was meant here, rather than "loose", though you could feasibly use a somewhat uncommon definition of "loose" to mean what would be meant by "lose": "Loose the hounds" for instance, as in "Release the hounds". Substituting in "value" for "hounds" gives "release the value", and makes some sense, but futher substituting back to loose gives "loose the value" which overall just seems a bit anachronistic. Instead, use modern, pragmatic English and save a character. Cc: Russell Currey <ruscur@russell.cc> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: Add new flags to control sleep status of GPIOsCharles Keepax1-0/+1
Add new flags to allow users to specify that they are not concerned with the status of GPIOs whilst in a sleep/low power state. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-07gpio: core: Decouple open drain/source flag with active low/highLaxman Dewangan1-0/+1
Currently, the GPIO interface is said to Open Drain if it is Single Ended and active LOW. Similarly, it is said as Open Source if it is Single Ended and active HIGH. The active HIGH/LOW is used in the interface for setting the pin state to HIGH or LOW when enabling/disabling the interface. In Open Drain interface, pin is set to HIGH by putting pin in high impedance and LOW by driving to the LOW. In Open Source interface, pin is set to HIGH by driving pin to HIGH and set to LOW by putting pin in high impedance. With above, the Open Drain/Source is unrelated to the active LOW/HIGH in interface. There is interface where the enable/disable of interface is ether active LOW or HIGH but it is Open Drain type. Hence decouple the Open Drain with Single Ended + Active LOW and Open Source with Single Ended + Active HIGH. Adding different flag for the Open Drain/Open Source which is valid only when Single ended flag is enabled. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04gpio: OF: localize some gpiochip init functionsLinus Walleij1-5/+0
of_gpiochip_add() and of_gpiochip_remove() are only used locally in the gpio subsystem so move these functions to the local header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: of: provide optional of_mm_gpiochip_add_data() functionLinus Walleij1-2/+8
In the same spirit as we add an optional void *data argument to the gpiochip_add_data() call, we need this also for of_mm_gpiochip_add(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-04gpiolib: always initialize *flags from of_get_named_gpio_flagsArnd Bergmann1-0/+3
The of_get_named_gpio_flags() function does nothing other than returning an error when CONFIG_OF_GPIO is disabled, but that causes spurious warnings about possible use of uninitialized variables in any code that does not check the of_get_named_gpio_flags() return value before trying to use the flags: drivers/input/misc/rotary_encoder.c: In function 'rotary_encoder_probe': drivers/input/misc/rotary_encoder.c:223:28: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/power/bq24735-charger.c: In function 'bq24735_charger_probe': drivers/power/bq24735-charger.c:227:12: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/power/sbs-battery.c: In function 'sbs_probe': drivers/power/sbs-battery.c:782:17: warning: 'gpio_flags' may be used uninitialized in this function [-Wmaybe-uninitialized] This changes the behavior of the inline helper to set the flags to zero when OF_GPIO is disabled, to avoid the warnings. In all cases I've encountered, we don't actually get to the place that uses the flags if CONFIG_OF is disabled because we won't enter the DT parser code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16gpiolib: Add and use OF_GPIO_SINGLE_ENDED flagLaurent Pinchart1-0/+1
The flag matches the DT GPIO_SINGLE_ENDED flag and allows drivers to parse and use the DT flag to handle single-ended (open-drain or open-source) GPIOs. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-28gpio: defer probe if pinctrl cannot be foundTomeu Vizoso1-2/+2
When an OF node has a pin range for its GPIOs, return -EPROBE_DEFER if the pin controller isn't available. Otherwise, the GPIO range wouldn't be set at all unless the pin controller probed always before the GPIO chip. With this change, the probe of the GPIO chip will be deferred and will be retried at a later point, hopefully once the pin controller has been registered and probed already. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio/gpiolib-of: Create of_mm_gpiochip_removeRicardo Ribalda Delgado1-0/+1
Create counterpart of of_mm_gpiochip_add(). This way the modules that can be removable do not duplicate the cleanup code. Suggested-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-21gpio: make of_get_named_gpiod_flags() privateAlexandre Courbot1-32/+3
of_get_named_gpiod_flags() is visible and directly usable by GPIO consumers, but it really should not as the gpiod interface relies on the simpler gpiod_get() to provide properly-configured GPIOs. of_get_named_gpiod_flags() is just used internally by gpiolib to implement gpiod_get(), and by the old of_get_named_gpio_flags() function, therefore it makes sense to make it gpiolib-private. As a side-effect, the unused (and unneeded) of_get_gpiod_flags() inline function is also removed, and of_get_named_gpio_flags() is moved from a static inline function to a regular one in gpiolib-of.c This results in all references to gpiod_* functions in of_gpio.h being gone, which is the way it should be since this file is part of the old integer GPIO interface. Changes since v1: - Fixed compilation error when CONFIG_OF_GPIO is not defined - Fixed warning due to of_gpio_flags enum not being declared in private gpiolib.h header Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-30gpiolib: include gpio/consumer.h in of_gpio.h for desc_to_gpio()Stephen Rothwell1-1/+1
Fixes this build error on sparc: In file included from drivers/spi/spi.c:33:0: include/linux/of_gpio.h: In function 'of_get_named_gpio_flags': include/linux/of_gpio.h:93:3: error: implicit declaration of function 'desc_to_gpio' [-Werror=implicit-function-declaration] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-20gpiolib: port of_ functions to use gpiodAlexandre Courbot1-5/+24
Refactor the of_ functions of gpiolib to use the now public gpiod interface, and export of_get_named_gpiod_flags() and of_get_gpiod_flags() functions. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-13gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()Grant Likely1-17/+23
This patch replaces the horribly coded of_count_named_gpios() with a call to of_count_phandle_with_args() which is far more efficient. This also changes the return value of of_gpio_count() & of_gpio_named_count() from 'unsigned int' to 'int' so that it can return an error code. All the users of that function are fixed up to correctly handle a negative return value. v2: Split GPIO portion into a separate patch Tested-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com>
2012-05-19gpio: Adjust of_xlate API to support multiple GPIO chipsGrant Likely1-1/+0
This patch changes the of_xlate API to make it possible for multiple gpio_chips to refer to the same device tree node. This is useful for banked GPIO controllers that use multiple gpio_chips for a single device. With this change the core code will try calling of_xlate on each gpio_chip that references the device_node and will return the gpio number for the first one to return 'true'. Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-06of_gpio: add support of of_gpio_named_count to be able to count named gpioJean-Christophe PLAGNIOL-VILLARD1-2/+25
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13of: create of_phandle_args to simplify return of phandle parsing dataGrant Likely1-4/+6
of_parse_phandle_with_args() needs to return quite a bit of data. Rather than making each datum a separate **out_ argument, this patch creates struct of_phandle_args to contain all the returned data and reworks the user of the function. This patch also enables of_parse_phandle_with_args() to return the device node pointer for the phandle node. This patch also ends up being fairly major surgery to of_parse_handle_with_args(). The existing structure didn't work well when extending to use of_phandle_args, and I discovered bugs during testing. I also took the opportunity to rename the function to be like the existing of_parse_phandle(). v2: - moved declaration of of_phandle_args to fix compile on non-DT builds - fixed incorrect index in example usage - fixed incorrect return code handling for empty entries Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-29of/gpio: export of_gpio_simple_xlateJamie Iles1-0/+9
Allow GPIO drivers to use of_gpio_simple_xlate. This is useful for the generic GPIO driver for example where gpio_chip is embedded in bgpio_chip and doesn't need of_mm_gpio_chip but has a simple 1:1 GPIO mapping. Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-29of/gpio: Add new method for getting gpios under different property namesJohn Bonesio1-5/+37
This patch adds a new routine, of_get_named_gpio_flags(), which takes the property name as a parameter rather than assuming "gpios". of_get_gpio_flags() is modified to call of_get_named_gpio_flags() with "gpios" as the property parameter. Signed-off-by: John Bonesio <bones@secretlab.ca> [grant.likely: Tidied up whitespace and tweaked kerneldoc comments.] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-06of/gpio: add default of_xlate function if device has a node pointerAnton Vorontsov1-2/+5
Implement generic OF gpio hooks and thus make device-enabled GPIO chips (i.e. the ones that have gpio_chip->dev specified) automatically attach to the OpenFirmware subsystem. Which means that now we can handle I2C and SPI GPIO chips almost* transparently. * "Almost" because some chips still require platform data, and for these chips OF-glue is still needed, though with this change the glue will be much smaller. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Andrew Morton <akpm@linux-foundation.org> CC: linux-kernel@vger.kernel.org CC: devicetree-discuss@lists.ozlabs.org
2010-07-06of/gpio: stop using device_node data pointer to find gpio_chipGrant Likely1-0/+3
Currently the kernel uses the struct device_node.data pointer to resolve a struct gpio_chip pointer from a device tree node. However, the .data member doesn't provide any type checking and there aren't any rules enforced on what it should be used for. There's no guarantee that the data stored in it actually points to an gpio_chip pointer. Instead of relying on the .data pointer, this patch modifies the code to add a lookup function which scans through the registered gpio_chips and returns the gpio_chip that has a pointer to the specified device_node. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: Andrew Morton <akpm@linux-foundation.org> CC: Anton Vorontsov <avorontsov@ru.mvista.com> CC: Grant Likely <grant.likely@secretlab.ca> CC: David Brownell <dbrownell@users.sourceforge.net> CC: Bill Gatliff <bgat@billgatliff.com> CC: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Jean Delvare <khali@linux-fr.org> CC: linux-kernel@vger.kernel.org CC: devicetree-discuss@lists.ozlabs.org
2010-07-06of/gpio: Kill of_gpio_chip and add members directly to gpio_chipAnton Vorontsov1-24/+5
The OF gpio infrastructure is great for describing GPIO connections within the device tree. However, using a GPIO binding still requires changes to the gpio controller just to add an of_gpio structure. In most cases, the gpio controller doesn't actually need any special support and the simple OF gpio mapping function is more than sufficient. Additional, the current scheme of using of_gpio_chip requires a convoluted scheme to maintain 1:1 mappings between of_gpio_chip and gpio_chip instances. If the struct of_gpio_chip data members were moved into struct gpio_chip, then it would simplify the processing of OF gpio bindings, and it would make it trivial to use device tree OF connections on existing gpiolib controller drivers. This patch eliminates the of_gpio_chip structure and moves the relevant fields into struct gpio_chip (conditional on CONFIG_OF_GPIO). This move simplifies the existing code and prepares for adding automatic device tree support to existing drivers. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org>
2008-12-21of/gpio: Implement of_gpio_count()Anton Vorontsov1-0/+6
This function is used to count how many GPIOs are specified for a device node. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03of/gpio: Implement of_get_gpio_flags()Anton Vorontsov1-4/+34
This adds a new function, of_get_gpio_flags, which is like of_get_gpio(), but accepts a new "flags" argument. This new function will be used by the drivers that need to retrieve additional GPIO information, such as active-low flag. Also, this changes the default ("simple") .xlate routine to warn about bogus (< 2) #gpio-cells usage: the second cell should always be present for GPIO flags. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-22of_gpio: Should use new <linux/gpio.h> headerWolfgang Grandegger1-1/+1
Since commit 7560fa60fcdcdb0da662f6a9fad9064b554ef46c (gpio: <linux/gpio.h> and "no GPIO support here" stubs) drivers can use GPIOs if they're available, but don't require them. This patch actually enables this feature. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-04-17[POWERPC] OF helpers for the GPIO APIAnton Vorontsov1-0/+69
This implements various helpers to support OF bindings for the GPIO LIB API. Previously this was PowerPC specific, but it seems this code isn't arch-dependent anyhow, so let's place it into of/. SPARC will not see this addition yet, real hardware seem to not use GPIOs at all. But this might change: http://www.leox.org/docs/faq_MLleon.html "16-bit I/O port" sounds promising. :-) Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>