summaryrefslogtreecommitdiff
path: root/include/linux/pipe_fs_i.h
AgeCommit message (Collapse)AuthorFilesLines
2020-10-02pipe: remove pipe_wait() and fix wakeup race with spliceLinus Torvalds1-2/+3
The pipe splice code still used the old model of waiting for pipe IO by using a non-specific "pipe_wait()" that waited for any pipe event to happen, which depended on all pipe IO being entirely serialized by the pipe lock. So by checking the state you were waiting for, and then adding yourself to the wait queue before dropping the lock, you were guaranteed to see all the wakeups. Strictly speaking, the actual wakeups were not done under the lock, but the pipe_wait() model still worked, because since the waiter held the lock when checking whether it should sleep, it would always see the current state, and the wakeup was always done after updating the state. However, commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") split the single wait-queue into two, and in the process also made the "wait for event" code wait for _two_ wait queues, and that then showed a race with the wakers that were not serialized by the pipe lock. It's only splice that used that "pipe_wait()" model, so the problem wasn't obvious, but Josef Bacik reports: "I hit a hang with fstest btrfs/187, which does a btrfs send into /dev/null. This works by creating a pipe, the write side is given to the kernel to write into, and the read side is handed to a thread that splices into a file, in this case /dev/null. The box that was hung had the write side stuck here [pipe_write] and the read side stuck here [splice_from_pipe_next -> pipe_wait]. [ more details about pipe_wait() scenario ] The problem is we're doing the prepare_to_wait, which sets our state each time, however we can be woken up either with reads or writes. In the case above we race with the WRITER waking us up, and re-set our state to INTERRUPTIBLE, and thus never break out of schedule" Josef had a patch that avoided the issue in pipe_wait() by just making it set the state only once, but the deeper problem is that pipe_wait() depends on a level of synchonization by the pipe mutex that it really shouldn't. And the whole "wait for any pipe state change" model really isn't very good to begin with. So rather than trying to work around things in pipe_wait(), remove that legacy model of "wait for arbitrary pipe event" entirely, and actually create functions that wait for the pipe actually being readable or writable, and can do so without depending on the pipe lock serializing everything. Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/ Reported-by: Josef Bacik <josef@toxicpanda.com> Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-13Merge tag 'notifications-20200601' of ↵Linus Torvalds1-1/+26
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull notification queue from David Howells: "This adds a general notification queue concept and adds an event source for keys/keyrings, such as linking and unlinking keys and changing their attributes. Thanks to Debarshi Ray, we do have a pull request to use this to fix a problem with gnome-online-accounts - as mentioned last time: https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47 Without this, g-o-a has to constantly poll a keyring-based kerberos cache to find out if kinit has changed anything. [ There are other notification pending: mount/sb fsinfo notifications for libmount that Karel Zak and Ian Kent have been working on, and Christian Brauner would like to use them in lxc, but let's see how this one works first ] LSM hooks are included: - A set of hooks are provided that allow an LSM to rule on whether or not a watch may be set. Each of these hooks takes a different "watched object" parameter, so they're not really shareable. The LSM should use current's credentials. [Wanted by SELinux & Smack] - A hook is provided to allow an LSM to rule on whether or not a particular message may be posted to a particular queue. This is given the credentials from the event generator (which may be the system) and the watch setter. [Wanted by Smack] I've provided SELinux and Smack with implementations of some of these hooks. WHY === Key/keyring notifications are desirable because if you have your kerberos tickets in a file/directory, your Gnome desktop will monitor that using something like fanotify and tell you if your credentials cache changes. However, we also have the ability to cache your kerberos tickets in the session, user or persistent keyring so that it isn't left around on disk across a reboot or logout. Keyrings, however, cannot currently be monitored asynchronously, so the desktop has to poll for it - not so good on a laptop. This facility will allow the desktop to avoid the need to poll. DESIGN DECISIONS ================ - The notification queue is built on top of a standard pipe. Messages are effectively spliced in. The pipe is opened with a special flag: pipe2(fds, O_NOTIFICATION_PIPE); The special flag has the same value as O_EXCL (which doesn't seem like it will ever be applicable in this context)[?]. It is given up front to make it a lot easier to prohibit splice&co from accessing the pipe. [?] Should this be done some other way? I'd rather not use up a new O_* flag if I can avoid it - should I add a pipe3() system call instead? The pipe is then configured:: ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth); ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter); Messages are then read out of the pipe using read(). - It should be possible to allow write() to insert data into the notification pipes too, but this is currently disabled as the kernel has to be able to insert messages into the pipe *without* holding pipe->mutex and the code to make this work needs careful auditing. - sendfile(), splice() and vmsplice() are disabled on notification pipes because of the pipe->mutex issue and also because they sometimes want to revert what they just did - but one or more notification messages might've been interleaved in the ring. - The kernel inserts messages with the wait queue spinlock held. This means that pipe_read() and pipe_write() have to take the spinlock to update the queue pointers. - Records in the buffer are binary, typed and have a length so that they can be of varying size. This allows multiple heterogeneous sources to share a common buffer; there are 16 million types available, of which I've used just a few, so there is scope for others to be used. Tags may be specified when a watchpoint is created to help distinguish the sources. - Records are filterable as types have up to 256 subtypes that can be individually filtered. Other filtration is also available. - Notification pipes don't interfere with each other; each may be bound to a different set of watches. Any particular notification will be copied to all the queues that are currently watching for it - and only those that are watching for it. - When recording a notification, the kernel will not sleep, but will rather mark a queue as having lost a message if there's insufficient space. read() will fabricate a loss notification message at an appropriate point later. - The notification pipe is created and then watchpoints are attached to it, using one of: keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01); watch_mount(AT_FDCWD, "/", 0, fd, 0x02); watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03); where in both cases, fd indicates the queue and the number after is a tag between 0 and 255. - Watches are removed if either the notification pipe is destroyed or the watched object is destroyed. In the latter case, a message will be generated indicating the enforced watch removal. Things I want to avoid: - Introducing features that make the core VFS dependent on the network stack or networking namespaces (ie. usage of netlink). - Dumping all this stuff into dmesg and having a daemon that sits there parsing the output and distributing it as this then puts the responsibility for security into userspace and makes handling namespaces tricky. Further, dmesg might not exist or might be inaccessible inside a container. - Letting users see events they shouldn't be able to see. TESTING AND MANPAGES ==================== - The keyutils tree has a pipe-watch branch that has keyctl commands for making use of notifications. Proposed manual pages can also be found on this branch, though a couple of them really need to go to the main manpages repository instead. If the kernel supports the watching of keys, then running "make test" on that branch will cause the testing infrastructure to spawn a monitoring process on the side that monitors a notifications pipe for all the key/keyring changes induced by the tests and they'll all be checked off to make sure they happened. https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch - A test program is provided (samples/watch_queue/watch_test) that can be used to monitor for keyrings, mount and superblock events. Information on the notifications is simply logged to stdout" * tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: smack: Implement the watch_key and post_notification hooks selinux: Implement the watch_key security hook keys: Make the KEY_NEED_* perms an enum rather than a mask pipe: Add notification lossage handling pipe: Allow buffers to be marked read-whole-or-error for notifications Add sample notification program watch_queue: Add a key/keyring notification facility security: Add hooks to rule on setting a watch pipe: Add general notification queue support pipe: Add O_NOTIFICATION_PIPE security: Add a hook for the point of notification insertion uapi: General notification queue definitions
2020-05-20fs: rename pipe_buf ->steal to ->try_stealChristoph Hellwig1-17/+17
And replace the arcane return value convention with a simple bool where true means success and false means failure. [AV: braino fix folded in] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20fs: make the pipe_buf_operations ->confirm operation optionalChristoph Hellwig1-2/+3
Just return 0 for success if it is not present. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20fs: make the pipe_buf_operations ->steal operation optionalChristoph Hellwig1-1/+2
Just return 1 for failure if it is not present. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20pipe: merge anon_pipe_buf*_opsChristoph Hellwig1-1/+1
All the op vectors are exactly the same, they are just used to encode packet or nomerge behavior. There already is a flag for the packet behavior, so just add a new one to allow for merging. Inverting it vs the previous nomerge special casing actually allows for much nicer code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-19pipe: Add notification lossage handlingDavid Howells1-0/+7
Add handling for loss of notifications by having read() insert a loss-notification message after it has read the pipe buffer that was last in the ring when the loss occurred. Lossage can come about either by running out of notification descriptors or by running out of space in the pipe ring. Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-19pipe: Allow buffers to be marked read-whole-or-error for notificationsDavid Howells1-0/+1
Allow a buffer to be marked such that read() must return the entire buffer in one go or return ENOBUFS. Multiple buffers can be amalgamated into a single read, but a short read will occur if the next "whole" buffer won't fit. This is useful for watch queue notifications to make sure we don't split a notification across multiple reads, especially given that we need to fabricate an overrun record under some circumstances - and that isn't in the buffers. Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-19pipe: Add general notification queue supportDavid Howells1-1/+18
Make it possible to have a general notification queue built on top of a standard pipe. Notifications are 'spliced' into the pipe and then read out. splice(), vmsplice() and sendfile() are forbidden on pipes used for notifications as post_one_notification() cannot take pipe->mutex. This means that notifications could be posted in between individual pipe buffers, making iov_iter_revert() difficult to effect. The way the notification queue is used is: (1) An application opens a pipe with a special flag and indicates the number of messages it wishes to be able to queue at once (this can only be set once): pipe2(fds, O_NOTIFICATION_PIPE); ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth); (2) The application then uses poll() and read() as normal to extract data from the pipe. read() will return multiple notifications if the buffer is big enough, but it will not split a notification across buffers - rather it will return a short read or EMSGSIZE. Notification messages include a length in the header so that the caller can split them up. Each message has a header that describes it: struct watch_notification { __u32 type:24; __u32 subtype:8; __u32 info; }; The type indicates the source (eg. mount tree changes, superblock events, keyring changes, block layer events) and the subtype indicates the event type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field indicates a number of things, including the entry length, an ID assigned to a watchpoint contributing to this buffer and type-specific flags. Supplementary data, such as the key ID that generated an event, can be attached in additional slots. The maximum message size is 127 bytes. Messages may not be padded or aligned, so there is no guarantee, for example, that the notification type will be on a 4-byte bounary. Signed-off-by: David Howells <dhowells@redhat.com>
2020-02-12linux/pipe_fs_i.h: fix kernel-doc warnings after @wait was splitRandy Dunlap1-1/+2
Fix kernel-doc warnings in struct pipe_inode_info after @wait was split into @rd_wait and @wr_wait. include/linux/pipe_fs_i.h:66: warning: Function parameter or member 'rd_wait' not described in 'pipe_inode_info' include/linux/pipe_fs_i.h:66: warning: Function parameter or member 'wr_wait' not described in 'pipe_inode_info' Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-08pipe: use exclusive waits when reading or writingLinus Torvalds1-1/+1
This makes the pipe code use separate wait-queues and exclusive waiting for readers and writers, avoiding a nasty thundering herd problem when there are lots of readers waiting for data on a pipe (or, less commonly, lots of writers waiting for a pipe to have space). While this isn't a common occurrence in the traditional "use a pipe as a data transport" case, where you typically only have a single reader and a single writer process, there is one common special case: using a pipe as a source of "locking tokens" rather than for data communication. In particular, the GNU make jobserver code ends up using a pipe as a way to limit parallelism, where each job consumes a token by reading a byte from the jobserver pipe, and releases the token by writing a byte back to the pipe. This pattern is fairly traditional on Unix, and works very well, but will waste a lot of time waking up a lot of processes when only a single reader needs to be woken up when a writer releases a new token. A simplified test-case of just this pipe interaction is to create 64 processes, and then pass a single token around between them (this test-case also intentionally passes another token that gets ignored to test the "wake up next" logic too, in case anybody wonders about it): #include <unistd.h> int main(int argc, char **argv) { int fd[2], counters[2]; pipe(fd); counters[0] = 0; counters[1] = -1; write(fd[1], counters, sizeof(counters)); /* 64 processes */ fork(); fork(); fork(); fork(); fork(); fork(); do { int i; read(fd[0], &i, sizeof(i)); if (i < 0) continue; counters[0] = i+1; write(fd[1], counters, (1+(i & 1)) *sizeof(int)); } while (counters[0] < 1000000); return 0; } and in a perfect world, passing that token around should only cause one context switch per transfer, when the writer of a token causes a directed wakeup of just a single reader. But with the "writer wakes all readers" model we traditionally had, on my test box the above case causes more than an order of magnitude more scheduling: instead of the expected ~1M context switches, "perf stat" shows 231,852.37 msec task-clock # 15.857 CPUs utilized 11,250,961 context-switches # 0.049 M/sec 616,304 cpu-migrations # 0.003 M/sec 1,648 page-faults # 0.007 K/sec 1,097,903,998,514 cycles # 4.735 GHz 120,781,778,352 instructions # 0.11 insn per cycle 27,997,056,043 branches # 120.754 M/sec 283,581,233 branch-misses # 1.01% of all branches 14.621273891 seconds time elapsed 0.018243000 seconds user 3.611468000 seconds sys before this commit. After this commit, I get 5,229.55 msec task-clock # 3.072 CPUs utilized 1,212,233 context-switches # 0.232 M/sec 103,951 cpu-migrations # 0.020 M/sec 1,328 page-faults # 0.254 K/sec 21,307,456,166 cycles # 4.074 GHz 12,947,819,999 instructions # 0.61 insn per cycle 2,881,985,678 branches # 551.096 M/sec 64,267,015 branch-misses # 2.23% of all branches 1.702148350 seconds time elapsed 0.004868000 seconds user 0.110786000 seconds sys instead. Much better. [ Note! This kernel improvement seems to be very good at triggering a race condition in the make jobserver (in GNU make 4.2.1) for me. It's a long known bug that was fixed back in June 2017 by GNU make commit b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to avoid hangs."). But there wasn't a new release of GNU make until 4.3 on Jan 19 2020, so a number of distributions may still have the buggy version. Some have backported the fix to their 4.2.1 release, though, and even without the fix it's quite timing-dependent whether the bug actually is hit. ] Josh Triplett says: "I've been hammering on your pipe fix patch (switching to exclusive wait queues) for a month or so, on several different systems, and I've run into no issues with it. The patch *substantially* improves parallel build times on large (~100 CPU) systems, both with parallel make and with other things that use make's pipe-based jobserver. All current distributions (including stable and long-term stable distributions) have versions of GNU make that no longer have the jobserver bug" Tested-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-08pipe: remove 'waiting_writers' merging logicLinus Torvalds1-2/+0
This code is ancient, and goes back to when we only had a single page for the pipe buffers. The exact history is hidden in the mists of time (ie "before git", and in fact predates the BK repository too). At that long-ago point in time, it actually helped to try to merge big back-and-forth pipe reads and writes, and not limit pipe reads to the single pipe buffer in length just because that was all we had at a time. However, since then we've expanded the pipe buffers to multiple pages, and this logic really doesn't seem to make sense. And a lot of it is somewhat questionable (ie "hmm, the user asked for a non-blocking read, but we see that there's a writer pending, so let's wait anyway to get the extra data that the writer will have"). But more importantly, it makes the "go to sleep" logic much less obvious, and considering the wakeup issues we've had, I want to make for less of those kinds of things. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-15pipe: Allow pipes to have kernel-reserved slotsDavid Howells1-1/+5
Split pipe->ring_size into two numbers: (1) pipe->ring_size - indicates the hard size of the pipe ring. (2) pipe->max_usage - indicates the maximum number of pipe ring slots that userspace orchestrated events can fill. This allows for a pipe that is both writable by the general kernel notification facility and by userspace, allowing plenty of ring space for notifications to be added whilst preventing userspace from being able to pin too much unswappable kernel space. Signed-off-by: David Howells <dhowells@redhat.com>
2019-10-31pipe: Use head and tail pointers for the ring, not cursor and lengthDavid Howells1-4/+56
Convert pipes to use head and tail pointers for the buffer ring rather than pointer and length as the latter requires two atomic ops to update (or a combined op) whereas the former only requires one. (1) The head pointer is the point at which production occurs and points to the slot in which the next buffer will be placed. This is equivalent to pipe->curbuf + pipe->nrbufs. The head pointer belongs to the write-side. (2) The tail pointer is the point at which consumption occurs. It points to the next slot to be consumed. This is equivalent to pipe->curbuf. The tail pointer belongs to the read-side. (3) head and tail are allowed to run to UINT_MAX and wrap naturally. They are only masked off when the array is being accessed, e.g.: pipe->bufs[head & mask] This means that it is not necessary to have a dead slot in the ring as head == tail isn't ambiguous. (4) The ring is empty if "head == tail". A helper, pipe_empty(), is provided for this. (5) The occupancy of the ring is "head - tail". A helper, pipe_occupancy(), is provided for this. (6) The number of free slots in the ring is "pipe->ring_size - occupancy". A helper, pipe_space_for_user() is provided to indicate how many slots userspace may use. (7) The ring is full if "head - tail >= pipe->ring_size". A helper, pipe_full(), is provided for this. Signed-off-by: David Howells <dhowells@redhat.com>
2019-04-26Merge tag 'trace-v5.1-rc6' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Three tracing fixes: - Use "nosteal" for ring buffer splice pages - Memory leak fix in error path of trace_pid_write() - Fix preempt_enable_no_resched() (use preempt_enable()) in ring buffer code" * tag 'trace-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: trace: Fix preempt_enable_no_resched() abuse tracing: Fix a memory leak by early error exit in trace_pid_write() tracing: Fix buffer_ref pipe ops
2019-04-26tracing: Fix buffer_ref pipe opsJann Horn1-0/+1
This fixes multiple issues in buffer_pipe_buf_ops: - The ->steal() handler must not return zero unless the pipe buffer has the only reference to the page. But generic_pipe_buf_steal() assumes that every reference to the pipe is tracked by the page's refcount, which isn't true for these buffers - buffer_pipe_buf_get(), which duplicates a buffer, doesn't touch the page's refcount. Fix it by using generic_pipe_buf_nosteal(), which refuses every attempted theft. It should be easy to actually support ->steal, but the only current users of pipe_buf_steal() are the virtio console and FUSE, and they also only use it as an optimization. So it's probably not worth the effort. - The ->get() and ->release() handlers can be invoked concurrently on pipe buffers backed by the same struct buffer_ref. Make them safe against concurrency by using refcount_t. - The pointers stored in ->private were only zeroed out when the last reference to the buffer_ref was dropped. As far as I know, this shouldn't be necessary anyway, but if we do it, let's always do it. Link: http://lkml.kernel.org/r/20190404215925.253531-1-jannh@google.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Fixes: 73a757e63114d ("ring-buffer: Return reader page back into existing ring buffer") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-15Merge branch 'page-refs' (page ref overflow)Linus Torvalds1-4/+6
Merge page ref overflow branch. Jann Horn reported that he can overflow the page ref count with sufficient memory (and a filesystem that is intentionally extremely slow). Admittedly it's not exactly easy. To have more than four billion references to a page requires a minimum of 32GB of kernel memory just for the pointers to the pages, much less any metadata to keep track of those pointers. Jann needed a total of 140GB of memory and a specially crafted filesystem that leaves all reads pending (in order to not ever free the page references and just keep adding more). Still, we have a fairly straightforward way to limit the two obvious user-controllable sources of page references: direct-IO like page references gotten through get_user_pages(), and the splice pipe page duplication. So let's just do that. * branch page-refs: fs: prevent page refcount overflow in pipe_buf_get mm: prevent get_user_pages() from overflowing page refcount mm: add 'try_get_page()' helper function mm: make page ref count overflow check tighter and more explicit
2019-04-14fs: prevent page refcount overflow in pipe_buf_getMatthew Wilcox1-4/+6
Change pipe_buf_get() to return a bool indicating whether it succeeded in raising the refcount of the page (if the thing in the pipe is a page). This removes another mechanism for overflowing the page refcount. All callers converted to handle a failure. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-01pipe: stop using ->can_mergeJann Horn1-7/+0
Al Viro pointed out that since there is only one pipe buffer type to which new data can be appended, it isn't necessary to have a ->can_merge field in struct pipe_buf_operations, we can just check for a magic type. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-01splice: don't merge into linked buffersJann Horn1-0/+1
Before this patch, it was possible for two pipes to affect each other after data had been transferred between them with tee(): ============ $ cat tee_test.c int main(void) { int pipe_a[2]; if (pipe(pipe_a)) err(1, "pipe"); int pipe_b[2]; if (pipe(pipe_b)) err(1, "pipe"); if (write(pipe_a[1], "abcd", 4) != 4) err(1, "write"); if (tee(pipe_a[0], pipe_b[1], 2, 0) != 2) err(1, "tee"); if (write(pipe_b[1], "xx", 2) != 2) err(1, "write"); char buf[5]; if (read(pipe_a[0], buf, 4) != 4) err(1, "read"); buf[4] = 0; printf("got back: '%s'\n", buf); } $ gcc -o tee_test tee_test.c $ ./tee_test got back: 'abxx' $ ============ As suggested by Al Viro, fix it by creating a separate type for non-mergeable pipe buffers, then changing the types of buffers in splice_pipe_to_pipe() and link_pipe(). Cc: <stable@vger.kernel.org> Fixes: 7c77f0b3f920 ("splice: implement pipe to pipe splicing") Fixes: 70524490ee2e ("[PATCH] splice: add support for sys_tee()") Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-02-07pipe: reject F_SETPIPE_SZ with size over UINT_MAXEric Biggers1-1/+1
A pipe's size is represented as an 'unsigned int'. As expected, writing a value greater than UINT_MAX to /proc/sys/fs/pipe-max-size fails with EINVAL. However, the F_SETPIPE_SZ fcntl silently truncates such values to 32 bits, rather than failing with EINVAL as expected. (It *does* fail with EINVAL for values above (1 << 31) but <= UINT_MAX.) Fix this by moving the check against UINT_MAX into round_pipe_size() which is called in both cases. Link: http://lkml.kernel.org/r/20180111052902.14409-6-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-07pipe, sysctl: remove pipe_proc_fn()Eric Biggers1-1/+0
pipe_proc_fn() is no longer needed, as it only calls through to proc_dopipe_max_size(). Just put proc_dopipe_max_size() in the ctl_table entry directly, and remove the unneeded EXPORT_SYMBOL() and the ENOSYS stub for it. (The reason the ENOSYS stub isn't needed is that the pipe-max-size ctl_table entry is located directly in 'kern_table' rather than being registered separately. Therefore, the entry is already only defined when the kernel is built with sysctl support.) Link: http://lkml.kernel.org/r/20180111052902.14409-3-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-07pipe, sysctl: drop 'min' parameter from pipe-max-size converterEric Biggers1-1/+1
Patch series "pipe: buffer limits fixes and cleanups", v2. This series simplifies the sysctl handler for pipe-max-size and fixes another set of bugs related to the pipe buffer limits: - The root user wasn't allowed to exceed the limits when creating new pipes. - There was an off-by-one error when checking the limits, so a limit of N was actually treated as N - 1. - F_SETPIPE_SZ accepted values over UINT_MAX. - Reading the pipe buffer limits could be racy. This patch (of 7): Before validating the given value against pipe_min_size, do_proc_dopipe_max_size_conv() calls round_pipe_size(), which rounds the value up to pipe_min_size. Therefore, the second check against pipe_min_size is redundant. Remove it. Link: http://lkml.kernel.org/r/20180111052902.14409-2-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-18pipe: add proc_dopipe_max_size() to safely assign pipe_max_sizeJoe Lawrence1-0/+1
pipe_max_size is assigned directly via procfs sysctl: static struct ctl_table fs_table[] = { ... { .procname = "pipe-max-size", .data = &pipe_max_size, .maxlen = sizeof(int), .mode = 0644, .proc_handler = &pipe_proc_fn, .extra1 = &pipe_min_size, }, ... int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf, size_t *lenp, loff_t *ppos) { ... ret = proc_dointvec_minmax(table, write, buf, lenp, ppos) ... and then later rounded in-place a few statements later: ... pipe_max_size = round_pipe_size(pipe_max_size); ... This leaves a window of time between initial assignment and rounding that may be visible to other threads. (For example, one thread sets a non-rounded value to pipe_max_size while another reads its value.) Similar reads of pipe_max_size are potentially racy: pipe.c :: alloc_pipe_info() pipe.c :: pipe_set_size() Add a new proc_dopipe_max_size() that consolidates reading the new value from the user buffer, verifying bounds, and calling round_pipe_size() with a single assignment to pipe_max_size. Link: http://lkml.kernel.org/r/1507658689-11669-4-git-send-email-joe.lawrence@redhat.com Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-06pipe: fix comment in pipe_buf_operationsMiklos Szeredi1-8/+3
Map and unmap ops no longer exist. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-06pipe: add pipe_buf_steal() helperMiklos Szeredi1-0/+11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-06pipe: add pipe_buf_confirm() helperMiklos Szeredi1-1/+11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-06pipe: add pipe_buf_release() helperMiklos Szeredi1-0/+14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-06pipe: add pipe_buf_get() helperMiklos Szeredi1-0/+11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-20pipe: limit the per-user amount of pages allocated in pipesWilly Tarreau1-0/+4
On no-so-small systems, it is possible for a single process to cause an OOM condition by filling large pipes with data that are never read. A typical process filling 4000 pipes with 1 MB of data will use 4 GB of memory. On small systems it may be tricky to set the pipe max size to prevent this from happening. This patch makes it possible to enforce a per-user soft limit above which new pipes will be limited to a single page, effectively limiting them to 4 kB each, as well as a hard limit above which no new pipes may be created for this user. This has the effect of protecting the system against memory abuse without hurting other users, and still allowing pipes to work correctly though with less data at once. The limit are controlled by two new sysctls : pipe-user-pages-soft, and pipe-user-pages-hard. Both may be disabled by setting them to zero. The default soft limit allows the default number of FDs per process (1024) to create pipes of the default size (64kB), thus reaching a limit of 64MB before starting to create only smaller pipes. With 256 processes limited to 1024 FDs each, this results in 1024*64kB + (256*1024 - 1024) * 4kB = 1084 MB of memory allocated for a user. The hard limit is disabled by default to avoid breaking existing applications that make intensive use of pipes (eg: for splicing). Reported-by: socketpair@gmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-13Merge branch 'for-linus' of ↵Linus Torvalds1-19/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-02pipe: kill ->map() and ->unmap()Al Viro1-19/+0
all pipe_buffer_operations have the same instances of those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-20Merge branch 'master' into for-nextJiri Kosina1-0/+2
2014-02-19treewide: Fix typo in Documentation/DocBookMasanari Iida1-1/+1
This patch fix spelling typo in Documentation/DocBook. It is because .html and .xml files are generated by make htmldocs, I have to fix a typo within the source files. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-22fuse: fix pipe_buf_operationsMiklos Szeredi1-0/+2
Having this struct in module memory could Oops when if the module is unloaded while the buffer still persists in a pipe. Since sock_pipe_buf_ops is essentially the same as fuse_dev_pipe_buf_steal merge them into nosteal_pipe_buf_ops (this is the same as default_pipe_buf_ops except stealing the page from the buffer is not allowed). Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2013-04-09get rid of the last free_pipe_info() callersAl Viro1-2/+1
and rename __free_pipe_info() to free_pipe_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09get rid of alloc_pipe_info() argumentAl Viro1-1/+1
not used anymore Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09get rid of pipe->inodeAl Viro1-2/+0
it's used only as a flag to distinguish normal pipes/FIFOs from the internal per-task one used by file-to-file splice. And pipe->files would work just as well for that purpose... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09pipe: don't use ->i_mutexAl Viro1-0/+2
now it can be done - put mutex into pipe_inode_info, use it instead of ->i_mutex Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09pipe: take allocation and freeing of pipe_inode_info out of ->i_mutexAl Viro1-0/+2
* new field - pipe->files; number of struct file over that pipe (all sharing the same inode, of course); protected by inode->i_lock. * pipe_release() decrements pipe->files, clears inode->i_pipe when if the counter has reached 0 (all under ->i_lock) and, in that case, frees pipe after having done pipe_unlock() * fifo_open() starts with grabbing ->i_lock, and either bumps pipe->files if ->i_pipe was non-NULL or allocates a new pipe (dropping and regaining ->i_lock) and rechecks ->i_pipe; if it's still NULL, inserts new pipe there, otherwise bumps ->i_pipe->files and frees the one we'd allocated. At that point we know that ->i_pipe is non-NULL and won't go away, so we can do pipe_lock() on it and proceed as we used to. If we end up failing, decrement pipe->files and if it reaches 0 clear ->i_pipe and free the sucker after pipe_unlock(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-01Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
2012-07-29consolidate pipe file creationAl Viro1-0/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-24pipe: remove KM_USER0 from commentsCong Wang1-5/+3
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-04-30pipes: add a "packetized pipe" mode for writingLinus Torvalds1-0/+1
The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Ian Kent <raven@themaw.net> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24magic.h: move some FS magic numbers into magic.hMuthu Kumar1-2/+0
- Move open-coded filesystem magic numbers into magic.h - Rearrange magic.h so that the filesystem-related constants are grouped together. Signed-off-by: Muthukumar R <muthur@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10pipe_fs_i.h: fix kernel-doc warningRandy Dunlap1-0/+1
Fix kernel-doc notation warnings in pipe_fs_i.h: Warning(include/linux/pipe_fs_i.h:58): No description found for parameter 'buffers' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-29Un-inline get_pipe_info() helper functionLinus Torvalds1-12/+1
This avoids some include-file hell, and the function isn't really important enough to be inlined anyway. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-29Export 'get_pipe_info()' to other usersLinus Torvalds1-0/+12
And in particular, use it in 'pipe_fcntl()'. The other pipe functions do not need to use the 'careful' version, since they are only ever called for things that are already known to be pipes. The normal read/write/ioctl functions are called through the file operations structures, so if a file isn't a pipe, they'd never get called. But pipe_fcntl() is special, and called directly from the generic fcntl code, and needs to use the same careful function that the splice code is using. Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-03pipe: change /proc/sys/fs/pipe-max-pages to byte sized interfaceJens Axboe1-1/+3
This changes the interface to be based on bytes instead. The API matches that of F_SETPIPE_SZ in that it rounds up the passed in size so that the resulting page array is a power-of-2 in size. The proc file is renamed to /proc/sys/fs/pipe-max-size to reflect this change. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>