summaryrefslogtreecommitdiff
path: root/include/linux/power
AgeCommit message (Collapse)AuthorFilesLines
2018-04-26power: supply: bq27xxx: Add support for BQ27426Andrew F. Davis1-1/+2
This device is software similar to the BQ27426 except it has different data memory offsets. Add support here. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-23ARM: OMAP2+: Prepare to pass auxdata for smartreflexTony Lindgren1-1/+9
We are still initializing smartreflex with platform data using omap_device_build(). We can instead pass the platform data in with auxdata in pdata-quirks.c and make the driver use that in later patches. Note that we cannot enable the auxdata use yet, this is done in the last patch of the series. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-08Add support for bq27521 battery monitorPavel Machek1-0/+1
This adds basic support for BQ27521 battery monitor, used in Nokia N9 and N950. In particular, battery voltage is important to be able to tell when the battery is almost empty. Emptying battery on N950 is pretty painful, as flasher needs to be used to recover phone in such case. Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Andrew F. Davis <afd@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30power: supply: bq24190_charger: Export 5V boost converter as regulatorHans de Goede1-0/+18
Register the 5V boost converter as a regulator named "usb_otg_vbus". This commit also adds support for bq24190_platform_data, through which non device-tree platforms can pass the regulator_init_data (containing mappings for the consumer amongst other things). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq27xxx: Enable data memory update for certain chipsLiam Breck1-1/+0
Support data memory update on BQ27425. Parameters from TI datasheets are also provided for BQ27500, 545, 421, 441, 621; however these are commented out, as they are not tested. Add BQ27XXX_O_CFGUP & _O_RAM for use in bq27xxx_chip_data[n].opts and by data memory update functions. Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq27xxx: Add chip IDs for previously shadowed chipsLiam Breck1-0/+9
For the existing features, these chips act like others already ID'd, so they had false but functional IDs. We will be adding features which require correct IDs, so the following IDs are added: BQ2752X, 531, 542, 546, 742, 425, 441, 621 Chip-specific features are now tracked by BQ27XXX_O_* flags in di->opts. No functional changes to the driver. Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-25power: supply: bq27xxx: move platform driver code into bq27xxx_battery_hdq.cAndrew F. Davis1-17/+0
When the BQ27xxx driver was originally written the w1 subsystem only allowed device drivers for w1 attached devices to live in the w1 subsystem. Kernel driver subsystems expect that the driver for a device live in the directory of the subsystem for which it implements functionality, not in the directory of the bus that it is attached. To work around this, the BQ27xxx driver was implemented as a platform device driver and the interface driver would instantiate this device from within the w1 directory, then pass a w1 read callback as platform data. As we can now have the w1 interface driver in the power/supply directory (like we do already with the i2c interface driver) we can remove this middle-layer platform driver. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08power: supply: bq27xxx: Add power_supply_battery_info supportLiam Breck1-0/+2
Previously there was no way to configure these chips in the event that the defaults didn't match the battery in question. For chips with RAM data memory (and also those with flash/NVM data memory if CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is defined and the user has not set module param dt_monitored_battery_updates_nvm=0) we now call power_supply_get_battery_info(), check its values, and write battery properties to chip data memory if there is a dm_regs table for the chip. Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08power: supply: bq27xxx: Add chip data memory read/write supportLiam Breck1-0/+1
Add these to enable read/write of chip data memory RAM/NVM/flash: bq27xxx_battery_seal() bq27xxx_battery_unseal() bq27xxx_battery_set_cfgupdate() bq27xxx_battery_soft_reset() bq27xxx_battery_read_dm_block() bq27xxx_battery_write_dm_block() bq27xxx_battery_checksum_dm_block() Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08power: supply: bq27xxx: Add bulk transfer bus methodsMatt Ranostay1-0/+3
Declare bus.write/read_bulk/write_bulk(). Add I2C write/read_bulk/write_bulk() to implement the above. Add bq27xxx_write/read_block/write_block() helpers to call the above. Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Liam Breck <kernel@networkimprov.net> Acked-by: "Andrew F. Davis" <afd@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01power: supply: max17042_battery: Add support for the STATUS propertyHans de Goede1-0/+3
Userspace prefers the driver having a status property over having to guess itself. Specifically this will properly make the GNOME3 UI (and likely others) properly show discharging / charging / full status, instead of always showing discharging as status. Note that in the case there is no charger driver supplying the max17042, then a status of unknown will get returned. At least upower treats this the same as not having a status attribute, so in this case nothing changes from a userspace pov. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-05-01power: supply: max17042_battery: Add default platform_data fallback dataHans de Goede1-1/+5
Some x86 machines use a max17047 fuel-gauge and x86 might be missing platform_data if not provided by SFI. This commit adds default platform_data as fallback option so that the driver can work on boards where no platform_data is provided. Since not all boards have a thermistor hooked up, set temp_min to 0 and change the health checks from temp <= temp_min to temp < temp_min to not trigger on such boards (where temp reads 0). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-04-14power: supply: bq24190_charger: Use i2c-core irq-mapping codeHans de Goede1-16/+0
The i2c-core already maps of irqs before calling the driver's probe function and there are no in tree users of bq24190_platform_data->gpio_int. Remove the redundant custom irq-mapping code and just use client->irq. Cc: Liam Breck <kernel@networkimprov.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12power: supply: bq27xxx: adds specific support for bq27520-g4 revision.Chris Lapa1-0/+1
This commit adds the BQ27520G4 chip definition to specifically match the bq27520-G4 functionality as described in the datasheet. Signed-off-by: Chris Lapa <chris@lapa.com.au> Acked-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12power: supply: bq27xxx: adds specific support for bq27520-g3 revision.Chris Lapa1-0/+1
This commit adds the BQ27520G3 chip definition to specifically match the bq27520-G3 functionality as described in the datasheet. Signed-off-by: Chris Lapa <chris@lapa.com.au> Acked-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12power: supply: bq27xxx: adds specific support for bq27520-g2 revision.Chris Lapa1-0/+1
This commit adds the BQ27520G2 chip definition to specifically match the bq27520-G2 functionality as described in the datasheet. Signed-off-by: Chris Lapa <chris@lapa.com.au> Acked-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12power: supply: bq27xxx: adds specific support for bq27520-g1 revision.Chris Lapa1-0/+1
This commit adds the BQ27520G1 chip definition to specifically match the bq27520-G1 functionality as described in the datasheet. Signed-off-by: Chris Lapa <chris@lapa.com.au> Acked-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12power: supply: bq27xxx: adds specific support for bq27510-g3 revision.Chris Lapa1-0/+1
This commit adds the BQ27510G3 chip definition to specifically match the bq27510-G3 functionality as described in the datasheet. Signed-off-by: Chris Lapa <chris@lapa.com.au> Acked-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Tested-by: Chris Lapa <chris@lapa.com.au> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12power: supply: bq27xxx: adds specific support for bq27510-g2 revision.Chris Lapa1-0/+1
This commit adds the BQ27510G2 chip definition to specifically match the bq27510-G2 functionality as described in the datasheet. Signed-off-by: Chris Lapa <chris@lapa.com.au> Acked-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12power: supply: bq27xxx: adds specific support for bq27510-g1 revision.Chris Lapa1-0/+1
This commit adds the BQ27510G1 chip definition to specifically match the bq27510-G1 functionality as described in the datasheet. Signed-off-by: Chris Lapa <chris@lapa.com.au> Acked-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12power: supply: bq27xxx: adds specific support for bq27500/1 revision.Chris Lapa1-0/+1
This commit adds the BQ27500 chip definition to specifically match the bq27500/1 functionality as described in the datasheet. Signed-off-by: Chris Lapa <chris@lapa.com.au> Acked-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12power: supply: bq27xxx: rename BQ27510 allow for deprecation in future.Chris Lapa1-1/+1
The BQ2751X definition exists only to satisfy backwards compatibility. Signed-off-by: Chris Lapa <chris@lapa.com.au> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12power: supply: bq27xxx: rename BQ27500 allow for deprecation in future.Chris Lapa1-1/+1
The BQ2750X definition exists only to satisfy backwards compatibility. Signed-off-by: Chris Lapa <chris@lapa.com.au> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-11-24power: supply: bq27xxx_battery: Fix register map for BQ27510 and BQ27520Andrew F. Davis1-1/+2
The BQ27510 and BQ27520 use a slightly different register map than the BQ27500, add a new type enum and add these gauges to it. Fixes: d74534c27775 ("power: bq27xxx_battery: Add support for additional bq27xxx family devices") Based-on-patch-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-09-21power: supply: bq27xxx_battery: allow kernel poll_interval parameter runtime ↵Matt Ranostay1-0/+1
update Fix issue with poll_interval being not updated till the previous interval expired. Cc: Tony Lindgren <tony@atomide.com> Cc: Liam Breck <liam@networkimprov.net> Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-09-21power: supply: sbs-battery: Cleanup removal of chip->pdataPhil Reid1-2/+2
There where still a few lingering references to pdata after commit power: supply: sbs-battery: simplify DT parsing. Remove pdata from struct·sbs_info and conditional checks to ser if this was set from the i2c read / write functions. Instead of call max in each function for incrementing poll_retry_count do it once in the probe function. Fixup null pointer dereference in to pdata in sbs_external_power_changed. Change retry counts to u32 to avoid need for max. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-09-05power: supply: bq24735-charger: Request status GPIO with initial input setupPaul Kocialkowski1-4/+0
This requests the status GPIO with initial input setup. It is required to read the GPIO status at probe time and thus correctly avoid sending I2C messages when AC is not plugged. When requesting the GPIO without initial input setup, it always reads 0 which causes probe to fail as it assumes the charger is connected, sends I2C messages and fails. While at it, this switches the driver over to gpiod API. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-09-01power: supply: sbs-battery: Use gpio_desc and sleeping calls for battery detectPhil Reid1-4/+0
Switch to using new gpio_desc interface and devm gpio get calls to automatically manage gpio resource. Use gpiod_get_value which handles active high / low calls. If gpio_detect is set then force loading of the driver as it is reasonable to assume that the battery may not be present. Update the is_present flag immediately in the IRQ. Remove legacy gpio specification from platform data. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-06-28max8903: cleans up confusing relationship between dc_valid, dok and dcm.Chris Lapa1-3/+3
The max8903_charger.h file indicated that dcm and dok were not optional when dc_valid is set. It makes sense to have dok as a compulsory pin when dc_valid is given. However dcm can be optionally wired to a fixed level especially when the circuit is configured for dc power exclusively. The previous implementation already allowed for this somewhat, however no error was given if dok wasn't given whilst dc_valid was. The new implementation enforces dok presence when dc_valid is given. Whilst allowing dcm to be optional. Signed-off-by: Chris Lapa <chris@lapa.com.au> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-03-17Merge tag 'for-v4.6' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset changes from Sebastian Reichel: - add types for USB Type C and PD chargers - add act8945a charger driver - add ACPI/DT bindings for goldfish-battery - add support for versatile reset controller - misc fixes * tag 'for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (24 commits) power: pm2301-charger: use __maybe_unused to hide pm functions power: ipaq-micro-battery: use __maybe_unused to hide pm functions power_supply: 88pm860x_charger: do not pass NULL to power_supply_put jz4740-battery: Correct voltage change check power_supply: lp8788-charger: initialize boolean 'found' goldfish: Enable ACPI-based enumeration for goldfish battery power: goldfish_battery: add devicetree bindings power: act8945a: add charger driver for ACT8945A power: add documentation for ACT8945A's charger DT bindings ARM: dts: n900: Rename isp1704 to isp1707 to match correct name power_supply: bq27xxx_battery: Add of modalias and match table when CONFIG_OF is enabled power_supply: bq2415x_charger: Add of modalias and match table when CONFIG_OF is enabled power_supply: bq2415x_charger: Do not add acpi modalias when CONFIG_ACPI is not enabled power_supply: isp1704_charger: Add compatible of match for nxp,isp1707 power_supply: isp1704_charger: Error messages when probe fail power_supply: Add types for USB Type C and PD chargers power: bq24735-charger: add 'ti,external-control' option power: bq24735-charger: document 'ti,external-control' option power: bq24735-charger: fix failed i2c with ac-detect power: reset: Fix dependencies for !HAS_IOMEM archs ...
2016-02-21power: bq27xxx_battery: Restore device nameIvaylo Dimitrov1-0/+1
Patch <703df6c09795> ("power: bq27xxx_battery: Reorganize I2C into a module") has removed the device name numbering from bq27xxx_battery_i2c_probe. Fix that by restoring the code. Fixes: 703df6c097956d17a818e63961c82e8e9eef9fef Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-02-15power: bq24735-charger: add 'ti,external-control' optionJonathan Tinkham1-0/+2
Implement an 'ti,external-control' option for when the charger shouldn't be configured by the host. Signed-off-by: Jonathan Tinkham <sctincman@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-12-05power: bq27xxx_battery: Reorganize I2C into a moduleAndrew F. Davis1-10/+47
Separate out I2C functionality into a module. This fixes several small issues and simplifies the driver initialization. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-23power: bq27xxx_battery: Add support for additional bq27xxx family devicesAndrew F. Davis1-1/+9
Add support for additional devices and register equivalent family devices including the bq27010, bq27210, bq27500, bq27510, bq27520, bq27530, bq27531, bq27541, bq27542, bq27546, bq27545, bq27441, bq27421, and the bq27641. To facilitate this process the register mapings have been moved to tables and other small cleanups have been made. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-23power: bq27xxx_battery: Platform initialization must declare a deviceAndrew F. Davis1-1/+5
When initialized as a platform device the initializer must now specify a device. An empty device name is no longer valid. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-23power: bq27x00_battery: Renaming for consistencyAndrew F. Davis1-2/+2
Rename functions that are used by multiple devices. New devices have been added and the function names and driver name are no longer general enough for the functionality they provide. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: GUAN Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22power: charger-manager: comment spelling fixesMarcel Ziswiler1-4/+4
By accident I stumbled over a few misspelled words in the charger-manager header file which this patch fixes. Namely: - Extcon rather than Exton - constraint rather than constratint - existence rather than existance - difference rather than diffential While at it also add a missing space before a closing comment star forward-slash. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-05-23power: max17042_battery: add HEALTH and TEMP_* properties supportRamakrishna Pallala1-0/+4
This patch adds the support for following battery properties to max17042 fuel gauge driver. POWER_SUPPLY_PROP_TEMP_ALERT_MIN POWER_SUPPLY_PROP_TEMP_ALERT_MAX POWER_SUPPLY_PROP_TEMP_MIN POWER_SUPPLY_PROP_TEMP_MAX POWER_SUPPLY_PROP_HEALTH Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-04-06power: max17042_battery: Use reg type instead of chip typeBeomho Seo1-1/+8
Currently, max17042 battery driver choose register map by MAX17042_DevName register. But it is return IC specific firmware version. So other maxim chip hard to use this drvier. This patch choose chip type from driver_data. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14power_supply: Change ownership from driver to coreKrzysztof Kozlowski1-1/+2
Change the ownership of power_supply structure from each driver implementing the class to the power supply core. The patch changes power_supply_register() function thus all drivers implementing power supply class are adjusted. Each driver provides the implementation of power supply. However it should not be the owner of power supply class instance because it is exposed by core to other subsystems with power_supply_get_by_name(). These other subsystems have no knowledge when the driver will unregister the power supply. This leads to several issues when driver is unbound - mostly because user of power supply accesses freed memory. Instead let the core own the instance of struct 'power_supply'. Other users of this power supply will still access valid memory because it will be freed when device reference count reaches 0. Currently this means "it will leak" but power_supply_put() call in next patches will solve it. This solves invalid memory references in following race condition scenario: Thread 1: charger manager Thread 2: power supply driver, used by charger manager THREAD 1 (charger manager) THREAD 2 (power supply driver) ========================== ============================== psy = power_supply_get_by_name() Driver unbind, .remove power_supply_unregister() Device fully removed psy->get_property() The 'get_property' call is executed in invalid context because the driver was unbound and struct 'power_supply' memory was freed. This could be observed easily with charger manager driver (here compiled with max17040 fuel gauge): $ cat /sys/devices/virtual/power_supply/cm-battery/capacity & $ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind [ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 55.732584] pgd = d98d4000 [ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000 [ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 55.746210] Modules linked in: [ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496 [ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000 [ 55.771647] PC is at 0x0 [ 55.774182] LR is at charger_get_property+0x2f4/0x36c [ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013 [ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000 [ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68 [ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000 [ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68 [ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015 [ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210) [ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000) [ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8 [ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4 [ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80 [ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001 [ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000 [ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000 [ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124 [ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550 [ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364 [ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c [ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000 [ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000 [ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c) [ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48) [ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104) [ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28) [ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484) [ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c) [ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100) [ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c) [ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 56.000626] Code: bad PC value [ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]--- Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for compal-laptop.c] Acked-by: Darren Hart <dvhart@linux.intel.com> [for the mfd part] Acked-by: Lee Jones <lee.jones@linaro.org> [for the hid part] Acked-by: Jiri Kosina <jkosina@suse.cz> [for the acpi part] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-01-21power: charger-manager: Use alarmtimer for battery monitoring in suspend.Jonghwa Lee1-31/+1
To guerantee proper charing and managing batteries even in suspend, charger-manager has used rtc device with rtc framework interface. However, it is better to use alarmtimer for cleaner and more appropriate operation. This patch makes driver to use alarmtimer for polling work in suspend and removes all deprecated codes related with using rtc interface. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-10-28power: charger-manager: Fix accessing invalidated power supply after charger ↵Krzysztof Kozlowski1-2/+0
unbind The charger manager obtained in probe references to power supplies for all chargers with power_supply_get_by_name() for later usage. However if such charger driver was removed then this reference would point to old power supply (from driver which was removed). This lead to accessing invalid memory which could be observed with: $ echo "max77693-charger" > /sys/bus/platform/drivers/max77693-charger/unbind $ grep . /sys/devices/virtual/power_supply/battery/charger.0/* $ grep . /sys/devices/virtual/power_supply/battery/* [ 15.339817] Unable to handle kernel paging request at virtual address 0001c12c [ 15.346187] pgd = edd08000 [ 15.348814] [0001c12c] *pgd=6dce2831, *pte=00000000, *ppte=00000000 [ 15.355075] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 15.360967] Modules linked in: [ 15.364010] CPU: 2 PID: 1388 Comm: grep Not tainted 3.17.0-next-20141007-00027-ga95e761db1b0 #245 [ 15.372859] task: ee03ad00 ti: edcf6000 task.ti: edcf6000 [ 15.378241] PC is at 0x1c12c [ 15.381113] LR is at is_ext_pwr_online+0x30/0x6c [ 15.385706] pc : [<0001c12c>] lr : [<c0339fc4>] psr: a0000013 [ 15.385706] sp : edcf7e88 ip : 00000000 fp : 00000000 [ 15.397161] r10: eeb02c08 r9 : c04b1f84 r8 : eeb02c00 [ 15.402369] r7 : edc69a10 r6 : eea6ac10 r5 : eea6ac10 r4 : 00000004 [ 15.408878] r3 : 0001c12c r2 : edcf7e8c r1 : 00000004 r0 : ee914418 [ 15.415390] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 15.422506] Control: 10c5387d Table: 6dd0804a DAC: 00000015 [ 15.428236] Process grep (pid: 1388, stack limit = 0xedcf6240) [ 15.434050] Stack: (0xedcf7e88 to 0xedcf8000) [ 15.438395] 7e80: ee03ad00 00000000 edcf7f80 eea6aca8 edcf7ec4 c033b7b0 [ 15.446554] 7ea0: 00000001 ee1cc3f0 00000004 c06e1e44 eebdc000 c06e1e44 eeb02c00 c0337144 [ 15.454713] 7ec0: ee2dac68 c005cffc ee1cc3c0 c06e1e44 00000fff 00001000 eebdc000 c0278ca8 [ 15.462872] 7ee0: c0278c8c ee1cc3c0 eeb7ce00 c014422c edcf7f20 00008000 ee1cc3c0 ee9a48c0 [ 15.471030] 7f00: 00000001 00000001 edcf7f80 c0142d94 c0142d70 c01060f4 00021000 ee1cc3f0 [ 15.479190] 7f20: 00000000 00000000 c06a2150 eebdc000 2e7ec000 ee9a48c0 00008000 00021000 [ 15.487349] 7f40: edcf7f80 00008000 edcf6000 00021000 00021000 c00e39a4 00000000 ee9a48c0 [ 15.495508] 7f60: 00004000 00000000 00000000 ee9a48c0 ee9a48c0 00008000 00021000 c00e3aa0 [ 15.503668] 7f80: 00000000 00000000 0001f2e0 0001f2e0 00021000 00001000 00000003 c000f364 [ 15.511826] 7fa0: 00000000 c000f1a0 0001f2e0 00021000 00000003 00021000 00008000 00000000 [ 15.519986] 7fc0: 0001f2e0 00021000 00001000 00000003 00000001 000205e8 00000000 00021000 [ 15.528145] 7fe0: 00008000 bebbe910 0000a7ad b6edc49c 60000010 00000003 aaaaaaaa aaaaaaaa [ 15.536320] [<c0339fc4>] (is_ext_pwr_online) from [<c033b7b0>] (charger_get_property+0x170/0x314) [ 15.545164] [<c033b7b0>] (charger_get_property) from [<c0337144>] (power_supply_show_property+0x48/0x20c) [ 15.554719] [<c0337144>] (power_supply_show_property) from [<c0278ca8>] (dev_attr_show+0x1c/0x48) [ 15.563577] [<c0278ca8>] (dev_attr_show) from [<c014422c>] (sysfs_kf_seq_show+0x84/0x104) [ 15.571725] [<c014422c>] (sysfs_kf_seq_show) from [<c0142d94>] (kernfs_seq_show+0x24/0x28) [ 15.579973] [<c0142d94>] (kernfs_seq_show) from [<c01060f4>] (seq_read+0x1b0/0x484) [ 15.587614] [<c01060f4>] (seq_read) from [<c00e39a4>] (vfs_read+0x88/0x144) [ 15.594552] [<c00e39a4>] (vfs_read) from [<c00e3aa0>] (SyS_read+0x40/0x8c) [ 15.601417] [<c00e3aa0>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 15.608877] Code: bad PC value [ 15.611991] ---[ end trace a88fcc95208db283 ]--- The charger-manager should get reference to charger power supply on each use of get_property callback. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: 3bb3dbbd56ea ("power_supply: Add initial Charger-Manager driver") Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-10-28power: charger-manager: Fix accessing invalidated power supply after fuel ↵Krzysztof Kozlowski1-1/+0
gauge unbind The charger manager obtained reference to fuel gauge power supply in probe with power_supply_get_by_name() for later usage. However if fuel gauge driver was removed and re-added then this reference would point to old power supply (from driver which was removed). This lead to accessing old (and probably invalid) memory which could be observed with: $ echo "12-0036" > /sys/bus/i2c/drivers/max17042/unbind $ echo "12-0036" > /sys/bus/i2c/drivers/max17042/bind $ cat /sys/devices/virtual/power_supply/battery/capacity [ 240.480084] INFO: task cat:1393 blocked for more than 120 seconds. [ 240.484799] Not tainted 3.17.0-next-20141007-00028-ge60b6dd79570 #203 [ 240.491782] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.499589] cat D c0469530 0 1393 1 0x00000000 [ 240.505947] [<c0469530>] (__schedule) from [<c0469d3c>] (schedule_preempt_disabled+0x14/0x20) [ 240.514449] [<c0469d3c>] (schedule_preempt_disabled) from [<c046af08>] (mutex_lock_nested+0x1bc/0x458) [ 240.523736] [<c046af08>] (mutex_lock_nested) from [<c0287a98>] (regmap_read+0x30/0x60) [ 240.531647] [<c0287a98>] (regmap_read) from [<c032238c>] (max17042_get_property+0x2e8/0x350) [ 240.540055] [<c032238c>] (max17042_get_property) from [<c03247d8>] (charger_get_property+0x264/0x348) [ 240.549252] [<c03247d8>] (charger_get_property) from [<c0320764>] (power_supply_show_property+0x48/0x1e0) [ 240.558808] [<c0320764>] (power_supply_show_property) from [<c027308c>] (dev_attr_show+0x1c/0x48) [ 240.567664] [<c027308c>] (dev_attr_show) from [<c0141fb0>] (sysfs_kf_seq_show+0x84/0x104) [ 240.575814] [<c0141fb0>] (sysfs_kf_seq_show) from [<c0140b18>] (kernfs_seq_show+0x24/0x28) [ 240.584061] [<c0140b18>] (kernfs_seq_show) from [<c0104574>] (seq_read+0x1b0/0x484) [ 240.591702] [<c0104574>] (seq_read) from [<c00e1e24>] (vfs_read+0x88/0x144) [ 240.598640] [<c00e1e24>] (vfs_read) from [<c00e1f20>] (SyS_read+0x40/0x8c) [ 240.605507] [<c00e1f20>] (SyS_read) from [<c000e760>] (ret_fast_syscall+0x0/0x48) [ 240.612952] 4 locks held by cat/1393: [ 240.616589] #0: (&p->lock){+.+.+.}, at: [<c01043f4>] seq_read+0x30/0x484 [ 240.623414] #1: (&of->mutex){+.+.+.}, at: [<c01417dc>] kernfs_seq_start+0x1c/0x8c [ 240.631086] #2: (s_active#31){++++.+}, at: [<c01417e4>] kernfs_seq_start+0x24/0x8c [ 240.638777] #3: (&map->mutex){+.+...}, at: [<c0287a98>] regmap_read+0x30/0x60 The charger-manager should get reference to fuel gauge power supply on each use of get_property callback. The thermal zone 'tzd' field of power supply should not be used because of the same reason. Additionally this change solves also the issue with nested thermal_zone_get_temp() calls and related false lockdep positive for deadlock for thermal zone's mutex [1]. When fuel gauge is used as source of temperature then the charger manager forwards its get_temp calls to fuel gauge thermal zone. So actually different mutexes are used (one for charger manager thermal zone and second for fuel gauge thermal zone) but for lockdep this is one class of mutex. The recursion is removed by retrieving temperature through power supply's get_property(). In case external thermal zone is used ('cm-thermal-zone' property is present in DTS) the recursion does not exist. Charger manager simply exports POWER_SUPPLY_PROP_TEMP_AMBIENT property (instead of POWER_SUPPLY_PROP_TEMP) thus no thermal zone is created for this power supply. [1] https://lkml.org/lkml/2014/10/6/309 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: 3bb3dbbd56ea ("power_supply: Add initial Charger-Manager driver") Signed-off-by: Sebastian Reichel <sre@kernel.org>
2013-12-24isp1704_charger: Add DT supportSebastian Reichel1-0/+1
This patch introduces device tree support to the isp1704 charger driver. Adding support involved moving the handling of the enable GPIO from board code into the driver. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-24bq2415x_charger: Use power_supply notifier for automodePali Rohár1-43/+5
This patch removing set_mode_hook function from board data and replacing it with new string variable of notifier power supply device. After this change it is possible to add DT support because driver does not need specific board function anymore. Only static data and name of power supply device is required. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-24charger-manager: Support deivce tree in charger manager driverJonghwa Lee1-6/+6
Charger-manager can parse charger_desc data from devicetree which is used to register charger manager. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-24charger-manager: Modify the way of checking battery's temperatureJonghwa Lee1-8/+16
Charger-manager driver used to check battery temperature through the callback function passed by platform data. Unfortunatley, without that pre-defined callback function, charger-manager can't get battery's temperature at all. Also passing callback function through platform data ruins DT support for charger-manager. This patch mondifies charger-manager driver to get temperature of battery without pre-defined callback function. Now, charger-manager can use either of battery thermometer in fuel-gauge and ouside of battery. It uses thermal framework interface for outer thermometer if thermal fw is enabled. Otherwise, it tries to use fuel-gauge's through the power supply interface. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-10-26power_supply: Add support for bq24735 chargerDarbha Sriharsha1-0/+39
Adds support for the bq24735 charger chipset. The bq24735 is a high-efficiency, synchronous battery charger. It allows control of the charging current, input current, and the charger voltage DAC's through SMBus. Signed-off-by: Darbha Sriharsha <dsriharsha@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Thanks-to: Stephen Warren <swarren@wwwdotorg.org> Thanks-to: Thierry Reding <thierry.reding@gmail.com> Thanks-to: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-08-31power: Add twl4030_madc battery driver.Marek Belisko1-0/+39
This driver is used and tested on gta04 phone. It's using twl4030_madc (similar to rx51 existing driver). Driver also implement charging and discharging calibration data so user can define ranges and level. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lukas Märdian <lukas@goldelico.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>