summaryrefslogtreecommitdiff
path: root/include/linux/rtnetlink.h
AgeCommit message (Collapse)AuthorFilesLines
2016-09-02rtnetlink: fdb dump: optimize by saving last interface markersRoopa Prabhu1-1/+1
fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16net_sched: add the ability to defer skb freeingEric Dumazet1-2/+3
qdisc are changed under RTNL protection and often while blocking BH and root qdisc spinlock. When lots of skbs need to be dropped, we free them under these locks causing TX/RX freezes, and more generally latency spikes. This commit adds rtnl_kfree_skbs(), used to queue skbs for deferred freeing. Actual freeing happens right after RTNL is released, with appropriate scheduling points. rtnl_qdisc_drop() can also be used in place of disc_drop() when RTNL is held. qdisc_reset_queue() and __qdisc_reset_queue() get the new behavior, so standard qdiscs like pfifo, pfifo_fast... have their ->reset() method automatically handled. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net, sched: add clsact qdiscDaniel Borkmann1-0/+5
This work adds a generalization of the ingress qdisc as a qdisc holding only classifiers. The clsact qdisc works on ingress, but also on egress. In both cases, it's execution happens without taking the qdisc lock, and the main difference for the egress part compared to prior version of [1] is that this can be applied with _any_ underlying real egress qdisc (also classless ones). Besides solving the use-case of [1], that is, allowing for more programmability on assigning skb->priority for the mqprio case that is supported by most popular 10G+ NICs, it also opens up a lot more flexibility for other tc applications. The main work on classification can already be done at clsact egress time if the use-case allows and state stored for later retrieval f.e. again in skb->priority with major/minors (which is checked by most classful qdiscs before consulting tc_classify()) and/or in other skb fields like skb->tc_index for some light-weight post-processing to get to the eventual classid in case of a classful qdisc. Another use case is that the clsact egress part allows to have a central egress counterpart to the ingress classifiers, so that classifiers can easily share state (e.g. in cls_bpf via eBPF maps) for ingress and egress. Currently, default setups like mq + pfifo_fast would require for this to use, for example, prio qdisc instead (to get a tc_classify() run) and to duplicate the egress classifier for each queue. With clsact, it allows for leaving the setup as is, it can additionally assign skb->priority to put the skb in one of pfifo_fast's bands and it can share state with maps. Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid) w/o the need to perform a skb_dst_force() to hold on to it any longer. In lwt case, we can also use this facility to setup dst metadata via cls_bpf (bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for that (case of IFF_NO_QUEUE devices, for example). The realization can be done without any changes to the scheduler core framework. All it takes is that we have two a-priori defined minors/child classes, where we can mux between ingress and egress classifier list (dev->ingress_cl_list and dev->egress_cl_list, latter stored close to dev->_tx to avoid extra cacheline miss for moderate loads). The egress part is a bit similar modelled to handle_ing() and patched to a noop in case the functionality is not used. Both handlers are now called sch_handle_ingress() and sch_handle_egress(), code sharing among the two doesn't seem practical as there are various minor differences in both paths, so that making them conditional in a single handler would rather slow things down. Full compatibility to ingress qdisc is provided as well. Since both piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist per netdevice, and thus ingress qdisc specific behaviour can be retained for user space. This means, either a user does 'tc qdisc add dev foo ingress' and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact' alternative, where both, ingress and egress classifier can be configured as in the below example. ingress qdisc supports attaching classifier to any minor number whereas clsact has two fixed minors for muxing between the lists, therefore to not break user space setups, they are better done as two separate qdiscs. I decided to extend the sch_ingress module with clsact functionality so that commonly used code can be reused, the module is being aliased with sch_clsact so that it can be auto-loaded properly. Alternative would have been to add a flag when initializing ingress to alter its behaviour plus aliasing to a different name (as it's more than just ingress). However, the first would end up, based on the flag, choosing the new/old behaviour by calling different function implementations to handle each anyway, the latter would require to register ingress qdisc once again under different alias. So, this really begs to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops by its own that share callbacks used by both. Example, adding qdisc: # tc qdisc add dev foo clsact # tc qdisc show dev foo qdisc mq 0: root qdisc pfifo_fast 0: parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc clsact ffff: parent ffff:fff1 Adding filters (deleting, etc works analogous by specifying ingress/egress): # tc filter add dev foo ingress bpf da obj bar.o sec ingress # tc filter add dev foo egress bpf da obj bar.o sec egress # tc filter show dev foo ingress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action # tc filter show dev foo egress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will show an empty list for clsact. Either using the parent names (ingress/egress) or specifying the full major/minor will then show the related filter lists. Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend. [1] http://patchwork.ozlabs.org/patch/512949/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/core: lockdep_rtnl_is_held can be booleanYaowei Bai1-3/+3
This patch makes lockdep_rtnl_is_held return bool due to this particular function only using either one or zero as its return value. In another patch lockdep_is_held is also made return bool. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23switchdev; add VLAN support for port's bridge_getlinkScott Feldman1-1/+5
One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14net: add CONFIG_NET_INGRESS to enable ingress filteringPablo Neira1-1/+1
This new config switch enables the ingress filtering infrastructure that is controlled through the ingress_needed static key. This prepares the introduction of the Netfilter ingress hook that resides under this unique static key. Note that CONFIG_SCH_INGRESS automatically selects this, that should be no problem since this also depends on CONFIG_NET_CLS_ACT. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13net: kill useless net_*_ingress_queue() definitions when NET_CLS_ACT is unsetPablo Neira1-8/+0
This fixes 4577139b2dabf589 ("net: use jump label patching for ingress qdisc in __netif_receive_skb_core"). The only client of this is sch_ingress and it depends on NET_CLS_ACT. So there is no way these definition can be of any help. Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-29bridge/nl: remove wrong use of NLM_F_MULTINicolas Dichtel1-1/+1
NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: e5a55a898720 ("net: create generic bridge ops") Fixes: 815cccbf10b2 ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") CC: John Fastabend <john.r.fastabend@intel.com> CC: Sathya Perla <sathya.perla@emulex.com> CC: Subbu Seetharaman <subbu.seetharaman@emulex.com> CC: Ajit Khaparde <ajit.khaparde@emulex.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: intel-wired-lan@lists.osuosl.org CC: Jiri Pirko <jiri@resnulli.us> CC: Scott Feldman <sfeldma@gmail.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: bridge@lists.linux-foundation.org Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-13net: use jump label patching for ingress qdisc in __netif_receive_skb_coreDaniel Borkmann1-1/+14
Even if we make use of classifier and actions from the egress path, we're going into handle_ing() executing additional code on a per-packet cost for ingress qdisc, just to realize that nothing is attached on ingress. Instead, this can just be blinded out as a no-op entirely with the use of a static key. On input fast-path, we already make use of static keys in various places, e.g. skb time stamping, in RPS, etc. It makes sense to not waste time when we're assured that no ingress qdisc is attached anywhere. Enabling/disabling of that code path is being done via two helpers, namely net_{inc,dec}_ingress_queue(), that are being invoked under RTNL mutex when a ingress qdisc is being either initialized or destructed. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09rtnetlink: delay RTM_DELLINK notification until after ndo_uninit()Mahesh Bandewar1-0/+5
The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03bridge: add brport flags to dflt bridge_getlinkScott Feldman1-1/+2
To allow brport device to return current brport flags set on port. Add returned flags to nested IFLA_PROTINFO netlink msg built in dflt getlink. With this change, netlink msg returned for bridge_getlink contains the port's offloaded flag settings (the port's SELF settings). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03net: make vid as a parameter for ndo_fdb_add/ndo_fdb_delJiri Pirko1-2/+4
Do the work of parsing NDA_VLAN directly in rtnetlink code, pass simple u16 vid to drivers from there. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: sched: RCU cls_tcindexJohn Fastabend1-0/+10
Make cls_tcindex RCU safe. This patch addds a new RCU routine rcu_dereference_bh_rtnl() to check caller either holds the rcu read lock or RTNL. This is needed to handle the case where tcindex_lookup() is being called in both cases. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10bridge: fdb dumping takes a filter deviceJamal Hadi Salim1-0/+1
Dumping a bridge fdb dumps every fdb entry held. With this change we are going to filter on selected bridge port. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15rtnetlink: wait for unregistering devices in rtnl_link_unregister()Cong Wang1-0/+5
From: Cong Wang <cwang@twopensource.com> commit 50624c934db18ab90 (net: Delay default_device_exit_batch until no devices are unregistering) introduced rtnl_lock_unregistering() for default_device_exit_batch(). Same race could happen we when rmmod a driver which calls rtnl_link_unregister() as we call dev->destructor without rtnl lock. For long term, I think we should clean up the mess of netdev_run_todo() and net namespce exit code. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18net: allow netdev_all_upper_get_next_dev_rcu with rtnl lock heldJohn Fastabend1-0/+5
It is useful to be able to walk all upper devices when bringing a device online where the RTNL lock is held. In this case it is safe to walk the all_adj_list because the RTNL lock is used to protect the write side as well. This patch adds a check to see if the rtnl lock is held before throwing a warning in netdev_all_upper_get_next_dev_rcu(). Also because we now have a call site for lockdep_rtnl_is_held() outside COFIG_LOCK_PROVING an inline definition returning 1 is needed. Similar to the rcu_read_lock_is_held(). Fixes: 2a47fa45d4df ("ixgbe: enable l2 forwarding acceleration for macvlans") CC: Veaceslav Falico <vfalico@redhat.com> Reported-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-26net: fix rtnl notification in atomic contextAlexei Starovoitov1-1/+1
commit 991fb3f74c "dev: always advertise rx_flags changes via netlink" introduced rtnl notification from __dev_set_promiscuity(), which can be called in atomic context. Steps to reproduce: ip tuntap add dev tap1 mode tap ifconfig tap1 up tcpdump -nei tap1 & ip tuntap del dev tap1 mode tap [ 271.627994] device tap1 left promiscuous mode [ 271.639897] BUG: sleeping function called from invalid context at mm/slub.c:940 [ 271.664491] in_atomic(): 1, irqs_disabled(): 0, pid: 3394, name: ip [ 271.677525] INFO: lockdep is turned off. [ 271.690503] CPU: 0 PID: 3394 Comm: ip Tainted: G W 3.12.0-rc3+ #73 [ 271.703996] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 271.731254] ffffffff81a58506 ffff8807f0d57a58 ffffffff817544e5 ffff88082fa0f428 [ 271.760261] ffff8808071f5f40 ffff8807f0d57a88 ffffffff8108bad1 ffffffff81110ff8 [ 271.790683] 0000000000000010 00000000000000d0 00000000000000d0 ffff8807f0d57af8 [ 271.822332] Call Trace: [ 271.838234] [<ffffffff817544e5>] dump_stack+0x55/0x76 [ 271.854446] [<ffffffff8108bad1>] __might_sleep+0x181/0x240 [ 271.870836] [<ffffffff81110ff8>] ? rcu_irq_exit+0x68/0xb0 [ 271.887076] [<ffffffff811a80be>] kmem_cache_alloc_node+0x4e/0x2a0 [ 271.903368] [<ffffffff810b4ddc>] ? vprintk_emit+0x1dc/0x5a0 [ 271.919716] [<ffffffff81614d67>] ? __alloc_skb+0x57/0x2a0 [ 271.936088] [<ffffffff810b4de0>] ? vprintk_emit+0x1e0/0x5a0 [ 271.952504] [<ffffffff81614d67>] __alloc_skb+0x57/0x2a0 [ 271.968902] [<ffffffff8163a0b2>] rtmsg_ifinfo+0x52/0x100 [ 271.985302] [<ffffffff8162ac6d>] __dev_notify_flags+0xad/0xc0 [ 272.001642] [<ffffffff8162ad0c>] __dev_set_promiscuity+0x8c/0x1c0 [ 272.017917] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.033961] [<ffffffff8162b109>] dev_set_promiscuity+0x29/0x50 [ 272.049855] [<ffffffff8172e937>] packet_dev_mc+0x87/0xc0 [ 272.065494] [<ffffffff81732052>] packet_notifier+0x1b2/0x380 [ 272.080915] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.096009] [<ffffffff81761c66>] notifier_call_chain+0x66/0x150 [ 272.110803] [<ffffffff8108503e>] __raw_notifier_call_chain+0xe/0x10 [ 272.125468] [<ffffffff81085056>] raw_notifier_call_chain+0x16/0x20 [ 272.139984] [<ffffffff81620190>] call_netdevice_notifiers_info+0x40/0x70 [ 272.154523] [<ffffffff816201d6>] call_netdevice_notifiers+0x16/0x20 [ 272.168552] [<ffffffff816224c5>] rollback_registered_many+0x145/0x240 [ 272.182263] [<ffffffff81622641>] rollback_registered+0x31/0x40 [ 272.195369] [<ffffffff816229c8>] unregister_netdevice_queue+0x58/0x90 [ 272.208230] [<ffffffff81547ca0>] __tun_detach+0x140/0x340 [ 272.220686] [<ffffffff81547ed6>] tun_chr_close+0x36/0x60 Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08net: generic fdb support for drivers without ndo_fdb_<op>Vlad Yasevich1-0/+9
If the driver does not support the ndo_op use the generic handler for it. This should work in the majority of cases. Eventually the fdb_dflt_add call gets translated into a __dev_set_rx_mode() call which should handle hardware support for filtering via the IFF_UNICAST_FLT flag. Namely IFF_UNICAST_FLT indicates if the hardware can do unicast address filtering. If no support is available the device is put into promisc mode. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31ixgbe: add setlink, getlink support to ixgbe and ixgbevfJohn Fastabend1-0/+3
This adds support for the net device ops to manage the embedded hardware bridge on ixgbe devices. With this patch the bridge mode can be toggled between VEB and VEPA to support stacking macvlan devices or using the embedded switch without any SW component in 802.1Qbg/br environments. Additionally, this adds source address pruning to the ixgbevf driver to prune any frames sent back from a reflective relay on the switch. This is required because the existing hardware does not support this. Without it frames get pushed into the stack with its own src mac which is invalid per 802.1Qbg VEPA definition. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-13UAPI: (Scripted) Disintegrate include/linuxDavid Howells1-610/+1
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-07-11rtnetlink: Remove ts/tsage args to rtnl_put_cacheinfo().David S. Miller1-2/+1
Nobody provides non-zero values any longer. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28netlink: Get rid of obsolete rtnetlink macrosThomas Graf1-129/+0
Removes all RTA_GET*() and RTA_PUT*() variations, as well as the the unused rtattr_strcmp(). Get rid of rtm_get_table() by moving it to its only user decnet. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15net: add generic PF_BRIDGE:RTM_ FDB hooksJohn Fastabend1-0/+4
This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22rtnetlink: Fix problem with buffer allocationGreg Rose1-0/+3
Implement a new netlink attribute type IFLA_EXT_MASK. The mask is a 32 bit value that can be used to indicate to the kernel that certain extended ifinfo values are requested by the user application. At this time the only mask value defined is RTEXT_FILTER_VF to indicate that the user wants the ifinfo dump to send information about the VFs belonging to the interface. This patch fixes a bug in which certain applications do not have large enough buffers to accommodate the extra information returned by the kernel with large numbers of SR-IOV virtual functions. Those applications will not send the new netlink attribute with the interface info dump request netlink messages so they will not get unexpectedly large request buffers returned by the kernel. Modifies the rtnl_calcit function to traverse the list of net devices and compute the minimum buffer size that can hold the info dumps of all matching devices based upon the filter passed in via the new netlink attribute filter mask. If no filter mask is sent then the buffer allocation defaults to NLMSG_GOODSIZE. With this change it is possible to add yet to be defined netlink attributes to the dump request which should make it fairly extensible in the future. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-09rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_checkMichal Hocko1-2/+1
Since ca5ecddf (rcu: define __rcu address space modifier for sparse) rcu_dereference_check use rcu_read_lock_held as a part of condition automatically so callers do not have to do that as well. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-22net: dcbnl, add multicast group for DCBJohn Fastabend1-0/+2
Now that dcbnl is being used in many cases by more than a single agent it is beneficial to be notified when some entity either driver or user space has changed the DCB attributes. Today applications either end up polling the interface or relying on a user space database to maintain the DCB state and post events. Polling is a poor solution for obvious reasons. And relying on a user space database has its own downside. Namely it has created strange boot dependencies requiring the database be populated before any applications dependent on DCB attributes starts or the application goes into a polling loop. Populating the database requires negotiating link setting with the peer and can take anywhere from less than a second up to a few seconds depending on the switch implementation. Perhaps more importantly if another application or an embedded agent sets a DCB link attribute the database has no way of knowing other than polling the kernel. This prevents applications from responding quickly to changes in link events which at least in the FCoE case and probably any other protocols expecting a lossless link may result in IO errors. By adding a multicast group for DCB we have clean way to disseminate kernel DCB link attributes up to user space. Avoiding the need for user space to maintain a coherant database and disperse events that potentially do not reflect the current link state. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15net: rtnetlink.h -- only include linux/netdevice.h when used by the kernelAndy Whitcroft1-1/+1
The commit below added a new helper dev_ingress_queue to cleanly obtain the ingress queue pointer. This necessitated including 'linux/netdevice.h': commit 24824a09e35402b8d58dcc5be803a5ad3937bdba Author: Eric Dumazet <eric.dumazet@gmail.com> Date: Sat Oct 2 06:11:55 2010 +0000 net: dynamic ingress_queue allocation However this include triggers issues for applications in userspace which use the rtnetlink interfaces. Commonly this requires they include 'net/if.h' and 'linux/rtnetlink.h' leading to a compiler error as below: In file included from /usr/include/linux/netdevice.h:28:0, from /usr/include/linux/rtnetlink.h:9, from t.c:2: /usr/include/linux/if.h:135:8: error: redefinition of ‘struct ifmap’ /usr/include/net/if.h:112:8: note: originally defined here /usr/include/linux/if.h:169:8: error: redefinition of ‘struct ifreq’ /usr/include/net/if.h:127:8: note: originally defined here /usr/include/linux/if.h:218:8: error: redefinition of ‘struct ifconf’ /usr/include/net/if.h:177:8: note: originally defined here The new helper is only defined for the kernel and protected by __KERNEL__ therefore we can simply pull the include down into the same protected section. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05net: relax rtnl_dereference()David S. Miller1-4/+6
rtnl_dereference() is used in contexts where RTNL is held, to fetch an RCU protected pointer. Updates to this pointer are prevented by RTNL, so we dont need smp_read_barrier_depends() and the ACCESS_ONCE() provided in rcu_dereference_check(). rtnl_dereference() is mainly a macro to document the locking invariant. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05net: dynamic ingress_queue allocationEric Dumazet1-0/+8
ingress being not used very much, and net_device->ingress_queue being quite a big object (128 or 256 bytes), use a dynamic allocation if needed (tc qdisc add dev eth0 ingress ...) dev_ingress_queue(dev) helper should be used only with RTNL taken. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-16net: add rtnl_dereference()Eric Dumazet1-0/+9
We sometime want to dereference an rcu protected pointer while holding RTNL. Use a macro to hide all lockdep details. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09net: introduce rcu_dereference_rtnlEric Dumazet1-0/+11
We use rcu_dereference_check(p, rcu_read_lock_held() || lockdep_rtnl_is_held()) several times in network stack. More usages to come too, so its time to create a helper. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23net: RTA_MARK additionEric Dumazet1-0/+1
Add a new rt attribute, RTA_MARK, and use it in rt_fill_info()/inet_rtm_getroute() to support following commands : ip route get 192.168.20.110 mark NUMBER ip route get 192.168.20.108 from 192.168.20.110 iif eth1 mark NUMBER ip route list cache [192.168.20.110] mark NUMBER Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-11ipv6: ip6mr: support multiple tablesPatrick McHardy1-1/+2
This patch adds support for multiple independant multicast routing instances, named "tables". Userspace multicast routing daemons can bind to a specific table instance by issuing a setsockopt call using a new option MRT6_TABLE. The table number is stored in the raw socket data and affects all following ip6mr setsockopt(), getsockopt() and ioctl() calls. By default, a single table (RT6_TABLE_DFLT) is created with a default routing rule pointing to it. Newly created pim6reg devices have the table number appended ("pim6regX"), with the exception of devices created in the default table, which are named just "pim6reg" for compatibility reasons. Packets are directed to a specific table instance using routing rules, similar to how regular routing rules work. Currently iif, oif and mark are supported as keys, source and destination addresses could be supported additionally. Example usage: - bind pimd/xorp/... to a specific table: uint32_t table = 123; setsockopt(fd, SOL_IPV6, MRT6_TABLE, &table, sizeof(table)); - create routing rules directing packets to the new table: # ip -6 mrule add iif eth0 lookup 123 # ip -6 mrule add oif eth0 lookup 123 Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-26net: rtnetlink: decouple rtnetlink address families from real address familiesPatrick McHardy1-0/+6
Decouple rtnetlink address families from real address families in socket.h to be able to add rtnetlink interfaces to code that is not a real address family without increasing AF_MAX/NPROTO. This will be used to add support for multicast route dumping from all tables as the proc interface can't be extended to support anything but the main table without breaking compatibility. This partialy undoes the patch to introduce independant families for routing rules and converts ipmr routing rules to a new rtnetlink family. Similar to that patch, values up to 127 are reserved for real address families, values above that may be used arbitrarily. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-03-01Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller1-0/+3
Conflicts: drivers/firmware/iscsi_ibft.c
2010-02-25net: Add checking to rcu_dereference() primitivesPaul E. McKenney1-0/+3
Update rcu_dereference() primitives to use new lockdep-based checking. The rcu_dereference() in __in6_dev_get() may be protected either by rcu_read_lock() or RTNL, per Eric Dumazet. The rcu_dereference() in __sk_free() is protected by the fact that it is never reached if an update could change it. Check for this by using rcu_dereference_check() to verify that the struct sock's ->sk_wmem_alloc counter is zero. Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-5-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-24net: Add rtnetlink init_rcvwnd to set the TCP initial receive windowlaurent chavey1-0/+2
Add rtnetlink init_rcvwnd to set the TCP initial receive window size advertised by passive and active TCP connections. The current Linux TCP implementation limits the advertised TCP initial receive window to the one prescribed by slow start. For short lived TCP connections used for transaction type of traffic (i.e. http requests), bounding the advertised TCP initial receive window results in increased latency to complete the transaction. Support for setting initial congestion window is already supported using rtnetlink init_cwnd, but the feature is useless without the ability to set a larger TCP initial receive window. The rtnetlink init_rcvwnd allows increasing the TCP initial receive window, allowing TCP connection to advertise larger TCP receive window than the ones bounded by slow start. Signed-off-by: Laurent Chavey <chavey@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-16tcp: Revert per-route SACK/DSACK/TIMESTAMP changes.David S. Miller1-4/+2
It creates a regression, triggering badness for SYN_RECV sockets, for example: [19148.022102] Badness at net/ipv4/inet_connection_sock.c:293 [19148.022570] NIP: c02a0914 LR: c02a0904 CTR: 00000000 [19148.023035] REGS: eeecbd30 TRAP: 0700 Not tainted (2.6.32) [19148.023496] MSR: 00029032 <EE,ME,CE,IR,DR> CR: 24002442 XER: 00000000 [19148.024012] TASK = eee9a820[1756] 'privoxy' THREAD: eeeca000 This is likely caused by the change in the 'estab' parameter passed to tcp_parse_options() when invoked by the functions in net/ipv4/tcp_minisocks.c But even if that is fixed, the ->conn_request() changes made in this patch series is fundamentally wrong. They try to use the listening socket's 'dst' to probe the route settings. The listening socket doesn't even have a route, and you can't get the right route (the child request one) until much later after we setup all of the state, and it must be done by hand. This stuff really isn't ready, so the best thing to do is a full revert. This reverts the following commits: f55017a93f1a74d50244b1254b9a2bd7ac9bbf7d 022c3f7d82f0f1c68018696f2f027b87b9bb45c2 1aba721eba1d84a2defce45b950272cee1e6c72a cda42ebd67ee5fdf09d7057b5a4584d36fe8a335 345cda2fd695534be5a4494f1b59da9daed33663 dc343475ed062e13fc260acccaab91d7d80fd5b2 05eaade2782fb0c90d3034fd7a7d5a16266182bb 6a2a2d6bf8581216e08be15fcb563cfd6c430e1e Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04net: cleanup include/linuxEric Dumazet1-38/+19
This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Allow disabling of DSACK TCP option per routeGilad Ben-Yossef1-0/+1
Add and use no DSCAK bit in the features field. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: Ori Finkelman <ori@comsleep.com> Sigend-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Allow to turn off TCP window scale opt per routeGilad Ben-Yossef1-0/+1
Add and use no window scale bit in the features field. Note that this is not the same as setting a window scale of 0 as would happen with window limit on route. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: Ori Finkelman <ori@comsleep.com> Sigend-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Allow disabling TCP timestamp options per routeGilad Ben-Yossef1-1/+1
Implement querying and acting upon the no timestamp bit in the feature field. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: Ori Finkelman <ori@comsleep.com> Sigend-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Add the no SACK route option featureGilad Ben-Yossef1-1/+1
Implement querying and acting upon the no sack bit in the features field. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: Ori Finkelman <ori@comsleep.com> Sigend-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09IPv6/addrconf: Fix minor addrlabel thinko Tushar Gohad1-1/+1
Fix apparent thinko related to RTM_DELADDRLABEL, introduced by commit 2a8cc6c89039e0530a3335954253b76ed0f9339a ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table."). Signed-off-by: Tushar Gohad <tgohad@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-20rtnetlink: add new value for DHCP added routesStephen Hemminger1-0/+1
To improve manageability, it would be good to be able to disambiguate routes added by administrator from those added by DHCP client. The only necessary kernel change is to add value to rtnetlink include file so iproute2 utility can use it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25netlink: change nlmsg_notify() return value logicPablo Neira Ayuso1-2/+2
This patch changes the return value of nlmsg_notify() as follows: If NETLINK_BROADCAST_ERROR is set by any of the listeners and an error in the delivery happened, return the broadcast error; else if there are no listeners apart from the socket that requested a change with the echo flag, return the result of the unicast notification. Thus, with this patch, the unicast notification is handled in the same way of a broadcast listener that has set the NETLINK_BROADCAST_ERROR socket flag. This patch is useful in case that the caller of nlmsg_notify() wants to know the result of the delivery of a netlink notification (including the broadcast delivery) and take any action in case that the delivery failed. For example, ctnetlink can drop packets if the event delivery failed to provide reliable logging and state-synchronization at the cost of dropping packets. This patch also modifies the rtnetlink code to ignore the return value of rtnl_notify() in all callers. The function rtnl_notify() (before this patch) returned the error of the unicast notification which makes rtnl_set_sk_err() reports errors to all listeners. This is not of any help since the origin of the change (the socket that requested the echoing) notices the ENOBUFS error if the notification fails and should resync itself. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30headers_check fix: linux/rtnetlink.hJaswinder Singh Rajput1-0/+1
fix the following 'make headers_check' warning: usr/include/linux/rtnetlink.h:328: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2008-11-21ixgbe: this patch adds support for DCB to the kernel and ixgbe driverAlexander Duyck1-0/+5
This adds support for Data Center Bridging (DCB) features in the ixgbe driver and adds an rtnetlink interface for configuring DCB to the kernel. The DCB feature support included are Priority Grouping (PG) - which allows bandwidth guarantees to be allocated to groups to traffic based on the 802.1q priority, and Priority Based Flow Control (PFC) - which introduces a new MAC control PAUSE frame which works at granularity of the 802.1p priority instead of the link (IEEE 802.3x). Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23Phonet: global definitionsRemi Denis-Courmont1-0/+4
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>