summaryrefslogtreecommitdiff
path: root/include/linux/sched
AgeCommit message (Collapse)AuthorFilesLines
2014-06-05mm: update comment for DEFAULT_MAX_MAP_COUNTKirill A. Shutemov1-0/+4
With ELF extended numbering 16-bit bound is not hard limit any more. [akpm@linux-foundation.org: fix typo] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-22sched: Consolidate open coded implementations of nice level frobbing into ↵Dongsheng Yang1-0/+16
nice_to_rlimit() and rlimit_to_nice() Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/a568a1e3cc8e78648f41b5035fa5e381d36274da.1399532322.git.yangds.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-22sched/prio: Add 3 macros of MAX_NICE, MIN_NICE and NICE_WIDTH in prio.hDongsheng Yang1-2/+6
Currently there is lots of hard coding to 19 and -20, to represent maximum and minimum of nice values. This patch add three macros in prio.h for maximum, minimum and width of nice value, and uses it to remove hardcoded values in prio.h. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/3994e89327b2b15f992277cdf9f409c516f87d1b.1392103744.git.yangds.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Collapsed two small patches. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-22sched/prio: Use DEFAULT_PRIO to define NICE_TO_PRIO() and PRIO_TO_NICE()Dongsheng Yang1-2/+2
There is already a macro named DEFAULT_PRIO in prio.h, we can use it to define NICE_TO_PRIO and PRIO_TO_NICE rather than use hard coding of (MAX_RT_PRIO + 20). Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4e28ec36fb49e8906027cbbdd900ab26a149905e.1392103744.git.yangds.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-22sched: Consider pi boosting in setscheduler()Thomas Gleixner1-0/+7
If a PI boosted task policy/priority is modified by a setscheduler() call we unconditionally dequeue and requeue the task if it is on the runqueue even if the new priority is lower than the current effective boosted priority. This can result in undesired reordering of the priority bucket list. If the new priority is less or equal than the current effective we just store the new parameters in the task struct and leave the scheduler class and the runqueue untouched. This is handled when the task deboosts itself. Only if the new priority is higher than the effective boosted priority we apply the change immediately. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Rebase ontop of v3.14-rc1. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Dario Faggioli <raistlin@linux.it> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1391803122-4425-7-git-send-email-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-09sched: Implement task_nice() as static inline functionDongsheng Yang1-1/+0
As patch "sched: Move the priority specific bits into a new header file" exposes the priority related macros in linux/sched/prio.h, we don't have to implement task_nice() in kernel/sched/core.c any more. This patch implements it in linux/sched/sched.h as static inline function, saving the kernel stack and enhancing performance a bit. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: clark.williams@gmail.com Cc: rostedt@goodmis.org Cc: raistlin@linux.it Cc: juri.lelli@gmail.com Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1390878045-7096-1-git-send-email-yangds.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-09sched: Expose some macros related to priorityDongsheng Yang1-0/+18
Some macros in kernel/sched/sched.h about priority are private to kernel/sched. But they are useful to other parts of the core kernel. This patch moves these macros from kernel/sched/sched.h to include/linux/sched/prio.h so that they are available to other subsystems. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: raistlin@linux.it Cc: juri.lelli@gmail.com Cc: clark.williams@gmail.com Cc: rostedt@goodmis.org Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/2b022810905b52d13238466807f4b2a691577180.1390859827.git.yangds.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-09sched: Move the priority specific bits into a new header fileDongsheng Yang2-18/+24
Some bits about priority are defined in linux/sched/rt.h, but some of them are not only for rt scheduler, such as MAX_PRIO. This patch move them all into a new header file, linux/sched/prio.h. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: clark.williams@gmail.com Cc: rostedt@goodmis.org Cc: raistlin@linux.it Cc: juri.lelli@gmail.com Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/f7549508a1588da2c613d601748ca9de30fa5dcf.1390859827.git.yangds.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-31Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core debug changes from Ingo Molnar: "This contains mostly kernel debugging related updates: - make hung_task detection more configurable to distros - add final bits for x86 UV NMI debugging, with related KGDB changes - update the mailing-list of MAINTAINERS entries I'm involved with" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hung_task: Display every hung task warning sysctl: Add neg_one as a standard constraint x86/uv/nmi, kgdb/kdb: Fix UV NMI handler when KDB not configured x86/uv/nmi: Fix Sparse warnings kgdb/kdb: Fix no KDB config problem MAINTAINERS: Restore "L: linux-kernel@vger.kernel.org" entries
2014-01-25hung_task: Display every hung task warningAaron Tomlin1-1/+1
When khungtaskd detects hung tasks, it prints out backtraces from a number of those tasks. Limiting the number of backtraces being printed out can result in the user not seeing the information necessary to debug the issue. The hung_task_warnings sysctl controls this feature. This patch makes it possible for hung_task_warnings to accept a special value to print an unlimited number of backtraces when khungtaskd detects hung tasks. The special value is -1. To use this value it is necessary to change types from ulong to int. Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: oleg@redhat.com Link: http://lkml.kernel.org/r/1390239253-24030-3-git-send-email-atomlin@redhat.com [ Build warning fix. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-24numa: add a sysctl for numa_balancingAndi Kleen1-0/+4
Add a working sysctl to enable/disable automatic numa memory balancing at runtime. This allows us to track down performance problems with this feature and is generally a good idea. This was possible earlier through debugfs, but only with special debugging options set. Also fix the boot message. [akpm@linux-foundation.org: s/sched_numa_balancing/sysctl_numa_balancing/] Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-13sched/deadline: Remove the sysctl_sched_dl knobsPeter Zijlstra1-13/+0
Remove the deadline specific sysctls for now. The problem with them is that the interaction with the exisiting rt knobs is nearly impossible to get right. The current (as per before this patch) situation is that the rt and dl bandwidth is completely separate and we enforce rt+dl < 100%. This is undesirable because this means that the rt default of 95% leaves us hardly any room, even though dl tasks are saver than rt tasks. Another proposed solution was (a discarted patch) to have the dl bandwidth be a fraction of the rt bandwidth. This is highly confusing imo. Furthermore neither proposal is consistent with the situation we actually want; which is rt tasks ran from a dl server. In which case the rt bandwidth is a direct subset of dl. So whichever way we go, the introduction of dl controls at this point is painful. Therefore remove them and instead share the rt budget. This means that for now the rt knobs are used for dl admission control and the dl runtime is accounted against the rt runtime. I realise that this isn't entirely desirable either; but whatever we do we appear to need to change the interface later, so better have a small interface for now. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-zpyqbqds1r0vyxtxza1e7rdc@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Add bandwidth management for SCHED_DEADLINE tasksDario Faggioli1-0/+13
In order of deadline scheduling to be effective and useful, it is important that some method of having the allocation of the available CPU bandwidth to tasks and task groups under control. This is usually called "admission control" and if it is not performed at all, no guarantee can be given on the actual scheduling of the -deadline tasks. Since when RT-throttling has been introduced each task group have a bandwidth associated to itself, calculated as a certain amount of runtime over a period. Moreover, to make it possible to manipulate such bandwidth, readable/writable controls have been added to both procfs (for system wide settings) and cgroupfs (for per-group settings). Therefore, the same interface is being used for controlling the bandwidth distrubution to -deadline tasks and task groups, i.e., new controls but with similar names, equivalent meaning and with the same usage paradigm are added. However, more discussion is needed in order to figure out how we want to manage SCHED_DEADLINE bandwidth at the task group level. Therefore, this patch adds a less sophisticated, but actually very sensible, mechanism to ensure that a certain utilization cap is not overcome per each root_domain (the single rq for !SMP configurations). Another main difference between deadline bandwidth management and RT-throttling is that -deadline tasks have bandwidth on their own (while -rt ones doesn't!), and thus we don't need an higher level throttling mechanism to enforce the desired bandwidth. This patch, therefore: - adds system wide deadline bandwidth management by means of: * /proc/sys/kernel/sched_dl_runtime_us, * /proc/sys/kernel/sched_dl_period_us, that determine (i.e., runtime / period) the total bandwidth available on each CPU of each root_domain for -deadline tasks; - couples the RT and deadline bandwidth management, i.e., enforces that the sum of how much bandwidth is being devoted to -rt -deadline tasks to stay below 100%. This means that, for a root_domain comprising M CPUs, -deadline tasks can be created until the sum of their bandwidths stay below: M * (sched_dl_runtime_us / sched_dl_period_us) It is also possible to disable this bandwidth management logic, and be thus free of oversubscribing the system up to any arbitrary level. Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Add SCHED_DEADLINE inheritance logicDario Faggioli1-0/+5
Some method to deal with rt-mutexes and make sched_dl interact with the current PI-coded is needed, raising all but trivial issues, that needs (according to us) to be solved with some restructuring of the pi-code (i.e., going toward a proxy execution-ish implementation). This is under development, in the meanwhile, as a temporary solution, what this commits does is: - ensure a pi-lock owner with waiters is never throttled down. Instead, when it runs out of runtime, it immediately gets replenished and it's deadline is postponed; - the scheduling parameters (relative deadline and default runtime) used for that replenishments --during the whole period it holds the pi-lock-- are the ones of the waiting task with earliest deadline. Acting this way, we provide some kind of boosting to the lock-owner, still by using the existing (actually, slightly modified by the previous commit) pi-architecture. We would stress the fact that this is only a surely needed, all but clean solution to the problem. In the end it's only a way to re-start discussion within the community. So, as always, comments, ideas, rants, etc.. are welcome! :-) Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> [ Added !RT_MUTEXES build fix. ] Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-11-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Add SCHED_DEADLINE structures & implementationDario Faggioli1-0/+24
Introduces the data structures, constants and symbols needed for SCHED_DEADLINE implementation. Core data structure of SCHED_DEADLINE are defined, along with their initializers. Hooks for checking if a task belong to the new policy are also added where they are needed. Adds a scheduling class, in sched/dl.c and a new policy called SCHED_DEADLINE. It is an implementation of the Earliest Deadline First (EDF) scheduling algorithm, augmented with a mechanism (called Constant Bandwidth Server, CBS) that makes it possible to isolate the behaviour of tasks between each other. The typical -deadline task will be made up of a computation phase (instance) which is activated on a periodic or sporadic fashion. The expected (maximum) duration of such computation is called the task's runtime; the time interval by which each instance need to be completed is called the task's relative deadline. The task's absolute deadline is dynamically calculated as the time instant a task (better, an instance) activates plus the relative deadline. The EDF algorithms selects the task with the smallest absolute deadline as the one to be executed first, while the CBS ensures each task to run for at most its runtime every (relative) deadline length time interval, avoiding any interference between different tasks (bandwidth isolation). Thanks to this feature, also tasks that do not strictly comply with the computational model sketched above can effectively use the new policy. To summarize, this patch: - introduces the data structures, constants and symbols needed; - implements the core logic of the scheduling algorithm in the new scheduling class file; - provides all the glue code between the new scheduling class and the core scheduler and refines the interactions between sched/dl and the other existing scheduling classes. Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Fabio Checconi <fchecconi@gmail.com> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17sched/numa: Drop sysctl_numa_balancing_settle_count sysctlWanpeng Li1-1/+0
commit 887c290e (sched/numa: Decide whether to favour task or group weights based on swap candidate relationships) drop the check against sysctl_numa_balancing_settle_count, this patch remove the sysctl. Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Link: http://lkml.kernel.org/r/1386833006-6600-1-git-send-email-liwanp@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06Merge branch 'sched/core' into core/locking, to prepare the kernel/locking/ ↵Ingo Molnar1-1/+0
file move Conflicts: kernel/Makefile There are conflicts in kernel/Makefile due to file moving in the scheduler tree - resolve them. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09sched/numa: Remove the numa_balancing_scan_period_reset sysctlMel Gorman1-1/+0
With scan rate adaptions based on whether the workload has properly converged or not there should be no need for the scan period reset hammer. Get rid of it. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1381141781-10992-60-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-23hung_task: Change sysctl_hung_task_check_count to 'int'Li Zefan1-1/+1
As 'sysctl_hung_task_check_count' is 'unsigned long' when this value is assigned to max_count in check_hung_uninterruptible_tasks(), it's truncated to 'int' type. This causes a minor artifact: if we write 2^32 to sysctl.hung_task_check_count, hung task detection will be effectively disabled. With this fix, it will still truncate the user input to 32 bits, but reading sysctl.hung_task_check_count reflects the actual truncated value. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/523FFF4E.9050401@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-22sched: move RR_TIMESLICE from sysctl.h to rt.hClark Williams2-6/+6
Originally submitted by Clark Williams as part of a cleanup, but happens also to fix an ia64 build problem: arch/ia64/kernel/init_task.c:38: error: 'RR_TIMESLICE' undeclared here (not in a function) Signed-off-by: Clark Williams <clark.williams@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-07sched/rt: Move rt specific bits into new header fileClark Williams1-0/+58
Move rt scheduler definitions out of include/linux/sched.h into new file include/linux/sched/rt.h Signed-off-by: Clark Williams <williams@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-07sched/rt: Add a tuning knob to allow changing SCHED_RR timesliceClark Williams1-1/+14
Add a /proc/sys/kernel scheduler knob named sched_rr_timeslice_ms that allows global changing of the SCHED_RR timeslice value. User visable value is in milliseconds but is stored as jiffies. Setting to 0 (zero) resets to the default (currently 100ms). Signed-off-by: Clark Williams <williams@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20130207094704.13751796@riff.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-07sched: Move sched.h sysctl bits into separate headerClark Williams1-0/+97
Move the sysctl-related bits from include/linux/sched.h into a new file: include/linux/sched/sysctl.h. Then update source files requiring access to those bits by including the new header file. Signed-off-by: Clark Williams <williams@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20130207094659.06dced96@riff.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>