summaryrefslogtreecommitdiff
path: root/include/linux/switchtec.h
AgeCommit message (Collapse)AuthorFilesLines
2020-01-15PCI/switchtec: Add Gen4 MRPC GAS access permission checkKelvin Cao1-0/+5
Gen4 hardware provides new MRPC commands to read and write directly from any address in the PCI BAR (which Microsemi refers to as GAS). Since accessing BARs can be dangerous and break the driver, we don't want unprivileged users to have this ability. Therefore, require CAP_SYS_ADMIN for the local and remote GAS access MRPC commands. Privileged processes will already have access to the BAR through the sysfs resource file so this doesn't give userspace any capabilities it didn't already have. [logang@deltatee.com: rework commit message] Link: https://lore.kernel.org/r/20200106190337.2428-11-logang@deltatee.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Add Gen4 flash information interface supportKelvin Cao1-0/+52
Add the new flash_info registers struct and the implementation of ioctl_flash_part_info() for the new Gen4 hardware. [logang@deltatee.com: rewrote commit message] Link: https://lore.kernel.org/r/20200115035648.2578-7-logang@deltatee.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Add Gen4 system info register supportLogan Gunthorpe1-0/+43
Add the Gen4-specific system info registers and ensure their usage is guarded by a check on the device's generation. Link: https://lore.kernel.org/r/20200115035648.2578-6-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Separate Gen3 register structures into unionsLogan Gunthorpe1-14/+27
Since the sys_info and flash_info registers differ significantly in Gen4 hardware, separate out the Gen3 registers into their own structure with a union in the main structure. No functional changes intended. Link: https://lore.kernel.org/r/20200115035648.2578-5-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Add 'generation' variableLogan Gunthorpe1-0/+6
Add a generation variable passed through the device ID table and test for Gen3-specific registers. This will allow us to add Gen4 and other devices that extend the programming model. Link: https://lore.kernel.org/r/20200115035648.2578-3-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Rename generation-specific constantsLogan Gunthorpe1-4/+4
Gen4 hardware will have different values for the SWITCHTEC_X_RUNNING and SWITCHTEC_IOCTL_NUM_PARTITIONS, so rename them with GEN3 in their name. No functional changes intended. Link: https://lore.kernel.org/r/20200115035648.2578-2-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Add support for Intercomm Notify and Upstream Error ContainmentLogan Gunthorpe1-2/+5
Add support for the Inter Fabric Manager Communication (Intercomm) Notify event in PAX variants of Switchtec hardware and the Upstream Error Containment port in the MR1 release of Gen3 firmware. Link: https://lore.kernel.org/r/20200106190337.2428-4-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-18switchtec: Increase PFF limit from 48 to 255Wesley Sheng1-1/+1
The Switchtec devices supports two PCIe Function Frameworks (PFFs) per upstream port (one for the port itself and one for the management endoint), and each PFF may have up to 255 ports. Previously the driver only supported 48 of those ports, and the SWITCHTEC_IOCTL_EVENT_SUMMARY ioctl only returned information about those 48. Increase SWITCHTEC_MAX_PFF_CSR from 48 to 255 so the driver supports all 255 possible ports. Rename SWITCHTEC_IOCTL_EVENT_SUMMARY and associated struct switchtec_ioctl_event_summary to SWITCHTEC_IOCTL_EVENT_SUMMARY_LEGACY and switchtec_ioctl_event_summary_legacy with so existing applications work unchanged, supporting up to 48 ports. Add replacement SWITCHTEC_IOCTL_EVENT_SUMMARY and struct switchtec_ioctl_event_summary that new and recompiled applications support up to 255 ports. Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-02-11ntb_hw_switchtec: Added support of >=4G memory windowsPaul Selles1-1/+5
Current Switchtec's BAR setup registers are limited to 32bits, corresponding to the maximum MW (memory window) size is <4G. Increase the MW sizes with the addition of the BAR Setup Extension Register for the upper 32bits of a 64bits MW size. This increases the MW range to between 4K and 2^63. Reported-by: Boris Glimcher <boris.glimcher@emc.com> Signed-off-by: Paul Selles <paul.selles@microchip.com> Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-02-11ntb_hw_switchtec: NT req id mapping table register entry number should be 512Wesley Sheng1-2/+2
The number of available NT req id mapping table entries per NTB control register is 512. The driver mistakenly limits the number to 256. Fix the array size of NT req id mapping table. Fixes: c082b04c9d40 ("NTB: switchtec: Add NTB hardware register definitions") Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-12-13switchtec: Add MRPC DMA mode supportWesley Sheng1-0/+16
MRPC normal mode requires the host to read the MRPC command status and output data from BAR. This results in high latency responses from the Memory Read TLP and potential Completion Timeout (CTO). Add support for MRPC DMA mode, including related macro definitions and data structures and code to: * Retrieve MRPC DMA mode version from adapter firmware * Allocate DMA buffer, register ISR, and enable DMA during init * Check MRPC execution status and get execution results from DMA buffer * Release DMA buffer and disable DMA function when unloading module MRPC DMA mode is a new feature of firmware, and the driver will fall back to MRPC normal mode if there is no support in the legacy firmware. Add a module parameter, "use_dma_mrpc", to select between MRPC DMA mode and MRPC normal mode. Since the driver automatically detects DMA support in the firmware, this parameter is just for debugging and testing. Include <linux/io-64-nonatomic-lo-hi.h> so that readq/writeq is replaced by two readl/writel on systems that do not support it. Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> [bhelgaas: changelog, simplify dma_ver check] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2018-06-30switchtec: Use generic PCI Vendor ID and Class CodeDoug Meyer1-4/+0
Move the Microsemi Switchtec PCI Vendor ID (same as PCI_VENDOR_ID_PMC_Sierra) to pci_ids.h. Also, replace Microsemi class constants with the standard PCI definitions. Signed-off-by: Doug Meyer <dmeyer@gigaio.com> [bhelgaas: restore SPDX (I assume it was removed by mistake), remove device ID definitions] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-01-29ntb_hw_switchtec: Expand PFF CSR registersLogan Gunthorpe1-1/+14
The PFF CSR registers actual mirrors the PCI configuration space for all the ports in the switch. Previously, this was not needed by the driver but will be used by the crosslink code to enumerate the bus in an host-less centre partition. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-01-29ntb_hw_switchtec: Allow using Switchtec NTB in multi-partition setupsKelvin Cao1-0/+8
Allow using Switchtec NTB in setups that have more than two partitions. Note: this does not enable having multi-host communication, it only allows for a single NTB link between two hosts in a network that might have more than two. Use following logic to determine the NT peer partition: 1) If there are 2 partitions, and the target vector is set in the Switchtec configuration, use the partition specified in target vector. 2) If there are 2 partitions and target vector is unset use the only other partition as specified in the NT EP map. 3) If there are more than 2 partitions and target vector is set use the other partition specified in target vector. 4) If there are more than 2 partitions and target vector is unset, this is invalid and report an error. Signed-off-by: Kelvin Cao <kelvin.cao@microsemi.com> [logang@deltatee.com: commit message fleshed out] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-12-19switchtec: Add Global Fabric Manager Server (GFMS) eventLogan Gunthorpe1-0/+3
Add a new event type that is newly exposed by recent firmware. The event will never occur if the firmware is too old. If user space tries to use this event in an older kernel, it will just get an EINVAL which is perfectly acceptable in the existing user space code. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-19NTB: switchtec_ntb: Introduce initial NTB driverLogan Gunthorpe1-0/+4
Seeing the Switchtec NTB hardware shares the same endpoint as the management endpoint we utilize the class_interface API to register an NTB driver for every Switchtec device in the system that has the NTB class code. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-19NTB: switchtec: Add link event notifier callbackLogan Gunthorpe1-0/+4
In order for the Switchtec NTB code to handle link change events we create a notifier callback in the switchtec code which gets called whenever an appropriate event interrupt occurs. In order to preserve userspace's ability to follow these events, we compare the event count with a stored copy from last time we checked. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-19NTB: switchtec: Add NTB hardware register definitionsLogan Gunthorpe1-0/+84
There are two additional regions: ctrl and dbmsg. The first is for generic NTB control and memory windows. The second is for doorbells and message registers. This patch also adds a number of related constants for using these registers. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-19NTB: switchtec: Export class symbol for use in upper layer driverLogan Gunthorpe1-0/+2
We export the class pointer symbol and add an extern define in the Switchtec header file. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-11-19NTB: switchtec: Move structure definitions into a common headerLogan Gunthorpe1-0/+279
Create the switchtec.h header in include/linux with hardware defines and the switchtec_dev structure. Both moved directly from switchtec.c. This is a prep patch for creating an NTB driver for Switchtec. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>