| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Using .compat_reset op from the previous patch, the buggy .reset
behaviour can be kept as-is on older userspace apps, which don't ack the
IOTLB_PERSIST backend feature. As this compatibility quirk is limited to
those drivers that used to be buggy in the past, it won't affect change
the behaviour or affect ABI on the setups with API compliant driver.
The separation of .compat_reset from the regular .reset allows
vhost-vdpa able to know which driver had broken behaviour before, so it
can apply the corresponding compatibility quirk to the individual driver
whenever needed. Compared to overloading the existing .reset with
flags, .compat_reset won't cause any extra burden to the implementation
of every compliant driver.
[mst: squashed in two fixup commits]
Message-Id: <1697880319-4937-6-git-send-email-si-wei.liu@oracle.com>
Message-Id: <1698102863-21122-1-git-send-email-si-wei.liu@oracle.com>
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <1698275594-19204-1-git-send-email-si-wei.liu@oracle.com>
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Some device specific IOMMU parent drivers have long standing bogus
behaviour that mistakenly clean up the maps during .reset. By
definition, this is violation to the on-chip IOMMU ops (i.e. .set_map,
or .dma_map & .dma_unmap) in those offending drivers, as the removal of
internal maps is completely agnostic to the upper layer, causing
inconsistent view between the userspace and the kernel. Some userspace
app like QEMU gets around of this brokenness by proactively removing and
adding back all the maps around vdpa device reset, but such workaround
actually penaltize other well-behaved driver setup, where vdpa reset
always comes with the associated mapping cost, especially for kernel
vDPA devices (use_va=false) that have high cost on pinning. It's
imperative to rectify this behaviour and remove the problematic code
from all those non-compliant parent drivers.
However, we cannot unconditionally remove the bogus map-cleaning code
from the buggy .reset implementation, as there might exist userspace
apps that already rely on the behaviour on some setup. Introduce a
.compat_reset driver op to keep compatibility with older userspace. New
and well behaved parent driver should not bother to implement such op,
but only those drivers that are doing or used to do non-compliant
map-cleaning reset will have to.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1697880319-4937-5-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Some device specific IOMMU parent drivers have long standing bogus
behavior that mistakenly clean up the maps during .reset. By definition,
this is violation to the on-chip IOMMU ops (i.e. .set_map, or .dma_map &
.dma_unmap) in those offending drivers, as the removal of internal maps
is completely agnostic to the upper layer, causing inconsistent view
between the userspace and the kernel. Some userspace app like QEMU gets
around of this brokenness by proactively removing and adding back all
the maps around vdpa device reset, but such workaround actually penalize
other well-behaved driver setup, where vdpa reset always comes with the
associated mapping cost, especially for kernel vDPA devices
(use_va=false) that have high cost on pinning. It's imperative to
rectify this behavior and remove the problematic code from all those
non-compliant parent drivers.
The reason why a separate .reset_map op is introduced is because this
allows a simple on-chip IOMMU model without exposing too much device
implementation detail to the upper vdpa layer. The .dma_map/unmap or
.set_map driver API is meant to be used to manipulate the IOTLB
mappings, and has been abstracted in a way similar to how a real IOMMU
device maps or unmaps pages for certain memory ranges. However, apart
from this there also exists other mapping needs, in which case 1:1
passthrough mapping has to be used by other users (read virtio-vdpa). To
ease parent/vendor driver implementation and to avoid abusing DMA ops in
an unexpacted way, these on-chip IOMMU devices can start with 1:1
passthrough mapping mode initially at the time of creation. Then the
.reset_map op can be used to switch iotlb back to this initial state
without having to expose a complex two-dimensional IOMMU device model.
The .reset_map is not a MUST for every parent that implements the
.dma_map or .set_map API, because device may work with DMA ops directly
by implement their own to manipulate system memory mappings, so don't
have to use .reset_map to achieve a simple IOMMU device model for 1:1
passthrough mapping.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1697880319-4937-2-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
In some cases, the access to the virtqueue's descriptor area, device
and driver areas (precluding indirect descriptor table in guest memory)
may have to be confined to a different address space than where its
buffers reside. Without loss of simplicity and generality with already
established terminology, let's fold up these 3 areas and call them
as a whole as descriptor table group, or descriptor group for short.
Specifically, in case of split virtqueues, descriptor group consists of
regions for Descriptor Table, Available Ring and Used Ring; for packed
virtqueues layout, descriptor group contains Descriptor Ring, Driver
and Device Event Suppression structures.
The group ID for a dedicated descriptor group can be obtained through a
new .get_vq_desc_group() op. If driver implements this op, it means that
the descriptor, device and driver areas of the virtqueue may reside
in a dedicated group than where its buffers reside, a.k.a the default
virtqueue group through the .get_vq_group() op.
In principle, the descriptor group may or may not have same group ID
as the default group. Even if the descriptor group has a different ID,
meaning the vq's descriptor group areas can optionally move to a
separate address space than where guest memory resides, the descriptor
group may still start from a default address space, same as where its
buffers reside. To move the descriptor group to a different address
space, .set_group_asid() has to be called to change the ASID binding
for the group, which is no different than what needs to be done on any
other virtqueue group. On the other hand, the .reset() semantics also
applies on descriptor table group, meaning the device reset will clear
all ASID bindings and move all virtqueue groups including descriptor
group back to the default address space, i.e. in ASID 0.
QEMU's shadow virtqueue is going to utilize dedicated descriptor group
to speed up map and unmap operations, yielding tremendous downtime
reduction by avoiding the full and slow remap cycle in SVQ switching.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-4-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
This operation allow vdpa parent to expose its own backend feature bits.
Next patches introduce a feature not compatible with all parent drivers:
the ability to enable vq after driver_ok. Each parent must declare if
it allows it or not.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-4-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add VIRTIO_F_NOTIFICATION_DATA support for vDPA transport.
If this feature is negotiated, the driver passes extra data when kicking
a virtqueue.
A device that offers this feature needs to implement the
kick_vq_with_data callback.
kick_vq_with_data receives the vDPA device and data.
data includes:
16 bits vqn and 16 bits next available index for split virtqueues.
16 bits vqs, 15 least significant bits of next available index
and 1 bit next_wrap for packed virtqueues.
This patch follows a patch [1] by Viktor Prutyanov which adds support
for the MMIO, channel I/O and modern PCI transports.
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20230413081855.36643-3-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
This patch addresses the following minor kdoc problems.
* Incorrect spelling of 'callback' and 'notification'
* Unrecognised kdoc format for 'struct vdpa_map_file'
* Missing documentation of 'get_vendor_vq_stats' member of
'struct vdpa_config_ops'
* Missing documentation of 'max_supported_vqs' and 'supported_features'
members of 'struct vdpa_mgmt_dev'
Most of these problems were flagged by:
$ ./scripts/kernel-doc -Werror -none include/linux/vdpa.h
include/linux/vdpa.h:20: warning: expecting prototype for struct vdpa_calllback. Prototype was for struct vdpa_callback instead
include/linux/vdpa.h:117: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Corresponding file area for device memory mapping
include/linux/vdpa.h:357: warning: Function parameter or member 'get_vendor_vq_stats' not described in 'vdpa_config_ops'
include/linux/vdpa.h:518: warning: Function parameter or member 'supported_features' not described in 'vdpa_mgmt_dev'
include/linux/vdpa.h:518: warning: Function parameter or member 'max_supported_vqs' not described in 'vdpa_mgmt_dev'
The misspelling of 'notification' was flagged by:
$ ./scripts/checkpatch.pl --codespell --showfile --strict -f include/linux/vdpa.h
include/linux/vdpa.h:171: CHECK: 'notifcation' may be misspelled - perhaps 'notification'?
...
Signed-off-by: Simon Horman <horms@kernel.org>
Message-Id: <20230331-vhost-fixes-v1-1-1f046e735b9e@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
These new optional callbacks is used to bind/unbind the device to
a specific address space so the vDPA framework can use VA when
these callbacks are implemented.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131326.44403-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add eventfd for the vdpa callback so that user
can signal it directly instead of triggering the
callback. It will be used for vhost-vdpa case.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-9-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
This introduces set/get_vq_affinity callbacks in
vdpa_config_ops to support virtqueue affinity
management for vdpa device drivers.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230323053043.35-3-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch introduces a new method to query the dma device that is use
for a specific virtqueue.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Tested-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230119061525.75068-3-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add a new operation to allow a vDPA device to be resumed after it has
been suspended. Trying to resume a device that wasn't suspended will
result in a no-op.
This operation is optional. If it's not implemented, the associated
backend feature bit will not be exposed. And if the feature bit is not
exposed, invoking this operation will return an error.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Message-Id: <6e05c4b31b47f3e29cb2bd7ebd56c81f84b8f48a.1672742878.git.sebastien.boeuf@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
This patch allows the device features to be provisioned through
netlink. A new attribute is introduced to allow the userspace to pass
a 64bit device features during device adding.
This provides several advantages:
- Allow to provision a subset of the features to ease the cross vendor
live migration.
- Better debug-ability for vDPA framework and parent.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220927074810.28627-2-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This operation is optional: It it's not implemented, backend feature bit
will not be exposed.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220810171512.2343333-2-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch makes get_vq_group and set_group_asid optional. This is
needed to unbreak the vDPA parent that doesn't support multiple
address spaces.
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Fixes: aaca8373c4b1 ("vhost-vdpa: support ASID based IOTLB API")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220609041901.2029-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
|
this patch is to add the support for vdpa tool in vp_vdpa
here is the example steps
modprobe vp_vdpa
modprobe vhost_vdpa
echo 0000:00:06.0>/sys/bus/pci/drivers/virtio-pci/unbind
echo 1af4 1041 > /sys/bus/pci/drivers/vp-vdpa/new_id
vdpa dev add name vdpa1 mgmtdev pci/0000:00:06.0
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20220429091030.547434-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
This patch introduces a new bus operation to allow the vDPA bus driver
to associate an ASID to a virtqueue group.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-8-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patches introduces the multiple address spaces support for vDPA
device. This idea is to identify a specific address space via an
dedicated identifier - ASID.
During vDPA device allocation, vDPA device driver needs to report the
number of address spaces supported by the device then the DMA mapping
ops of the vDPA device needs to be extended to support ASID.
This helps to isolate the environments for the virtqueue that will not
be assigned directly. E.g in the case of virtio-net, the control
virtqueue will not be assigned directly to guest.
As a start, simply claim 1 virtqueue groups and 1 address spaces for
all vDPA devices. And vhost-vDPA will simply reject the device with
more than 1 virtqueue groups or address spaces.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-7-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch introduces virtqueue groups to vDPA device. The virtqueue
group is the minimal set of virtqueues that must share an address
space. And the address space identifier could only be attached to
a specific virtqueue group.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-6-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Replace cf_mutex with rw_semaphore to reflect the fact that some calls
could be called concurrently but can suffice with read lock.
Suggested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-5-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Allows to read vendor statistics of a vdpa device. The specific
statistics data are received from the upstream driver in the form of an
(attribute name, attribute value) pairs.
An example of statistics for mlx5_vdpa device are:
received_desc - number of descriptors received by the virtqueue
completed_desc - number of descriptors completed by the virtqueue
A descriptor using indirect buffers is still counted as 1. In addition,
N chained descriptors are counted correctly N times as one would expect.
A new callback was added to vdpa_config_ops which provides the means for
the vdpa driver to return statistics results.
The interface allows for reading all the supported virtqueues, including
the control virtqueue if it exists.
Below are some examples taken from mlx5_vdpa which are introduced in the
following patch:
1. Read statistics for the virtqueue at index 1
$ vdpa dev vstats show vdpa-a qidx 1
vdpa-a:
queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836
2. Read statistics for the virtqueue at index 32
$ vdpa dev vstats show vdpa-a qidx 32
vdpa-a:
queue_type control_vq queue_index 32 received_desc 62 completed_desc 62
3. Read statisitics for the virtqueue at index 0 with json output
$ vdpa -j dev vstats show vdpa-a qidx 0
{"vstats":{"vdpa-a":{
"queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\
"name":"completed_desc","value":417548}}}
4. Read statistics for the virtqueue at index 0 with preety json output
$ vdpa -jp dev vstats show vdpa-a qidx 0
{
"vstats": {
"vdpa-a": {
"queue_type": "rx",
"queue_index": 0,
"name": "received_desc",
"value": 417776,
"name": "completed_desc",
"value": 417548
}
}
}
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-3-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use a helper to set driver_override to the reduce amount of duplicated
code.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change vdpa_device.nvqs and vhost_vdpa.nvqs to use u32
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220315032553.455-3-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Longpeng <<a href="mailto:longpeng2@huawei.com" target="_blank">longpeng2@huawei.com</a>><br></blockquote><div><br></div><div>Acked-by: Jason Wang <<a href="mailto:jasowang@redhat.com">jasowang@redhat.com</a>></div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
- GET_CONFIG_SIZE: return the size of the virtio config space.
The size contains the fields which are conditional on feature
bits.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220315032553.455-2-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
No functional change introduced. vdpa bus driver such as virtio_vdpa
or vhost_vdpa is not supposed to take care of the locking for core
by its own. The locked API vdpa_set_features should suffice the
bus driver's need.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/1642206481-30721-2-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Avoid the wrapper holding cf_mutex since it is not protecting anything.
To avoid confusion and unnecessary overhead incurred by it, remove.
Fixes: f489f27bc0ab ("vdpa: Sync calls set/get config/status with cf_mutex")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220111183400.38418-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Add max_supported_vqs and supported_features fields to struct
vdpa_mgmt_dev. Upstream drivers need to feel these values according to
the device capabilities.
These values are reported back in a netlink message when showing management
devices.
Examples:
$ auxiliary/mlx5_core.sf.1:
supported_classes net
max_supported_vqs 257
dev_features CSUM GUEST_CSUM MTU HOST_TSO4 HOST_TSO6 STATUS CTRL_VQ MQ \
CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
$ vdpa -j mgmtdev show
{"mgmtdev":{"auxiliary/mlx5_core.sf.1":{"supported_classes":["net"], \
"max_supported_vqs":257,"dev_features":["CSUM","GUEST_CSUM","MTU", \
"HOST_TSO4","HOST_TSO6","STATUS","CTRL_VQ","MQ","CTRL_MAC_ADDR", \
"VERSION_1","ACCESS_PLATFORM"]}}}
$ vdpa -jp mgmtdev show
{
"mgmtdev": {
"auxiliary/mlx5_core.sf.1": {
"supported_classes": [ "net" ],
"max_supported_vqs": 257,
"dev_features": ["CSUM","GUEST_CSUM","MTU","HOST_TSO4", \
"HOST_TSO6","STATUS","CTRL_VQ","MQ", \
"CTRL_MAC_ADDR","VERSION_1","ACCESS_PLATFORM"]
}
}
}
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-11-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com>
|
|
Add netlink support to configure the max virtqueue pairs for a device.
At least one pair is required. The maximum is dictated by the device.
Example:
$ vdpa dev add name vdpa-a mgmtdev auxiliary/mlx5_core.sf.1 max_vqp 4
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-6-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add wrappers to get/set status and protect these operations with
cf_mutex to serialize these operations with respect to get/set config
operations.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Provide an interface to read the negotiated features. This is needed
when building the netlink message in vdpa_dev_net_config_fill().
Also fix the implementation of vdpa_dev_net_config_fill() to use the
negotiated features instead of the device features.
To make APIs clearer, make the following name changes to struct
vdpa_config_ops so they better describe their operations:
get_features -> get_device_features
set_features -> set_driver_features
Finally, add get_driver_features to return the negotiated features and
add implementation to all the upstream drivers.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Since vhost_vdpa_mmap checks for its existence before calling it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20211104195248.2088904-1-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
`driver_override` allows to control which of the vDPA bus drivers
binds to a vDPA device.
If `driver_override` is not set, the previous behaviour is followed:
devices use the first vDPA bus driver loaded (unless auto binding
is disabled).
Tested on Fedora 34 with driverctl(8):
$ modprobe virtio-vdpa
$ modprobe vhost-vdpa
$ modprobe vdpa-sim-net
$ vdpa dev add mgmtdev vdpasim_net name dev1
# dev1 is attached to the first vDPA bus driver loaded
$ driverctl -b vdpa list-devices
dev1 virtio_vdpa
$ driverctl -b vdpa set-override dev1 vhost_vdpa
$ driverctl -b vdpa list-devices
dev1 vhost_vdpa [*]
Note: driverctl(8) integrates with udev so the binding is
preserved.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211126164753.181829-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 9000,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
As subsequent patch adds new structure field with comment, move the
structure comment to follow kernel coding style.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-4-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Introduce a command to query a device config layout.
An example query of network vdpa device:
$ vdpa dev add name bar mgmtdev vdpasim_net
$ vdpa dev config show
bar: mac 00:35:09:19:48:05 link up link_announce false mtu 1500
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:35:09:19:48:05",
"link ": "up",
"link_announce ": false,
"mtu": 1500,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-3-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Subsequent patches enable get and set configuration either
via management device or via vdpa device' config ops.
This requires synchronization between multiple callers to get and set
config callbacks. Features setting also influence the layout of the
configuration fields endianness.
To avoid exposing synchronization primitives to callers, introduce
helper for setting the configuration and use it.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-2-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This callback is optional. For vdpa devices that not support to change
virtqueue size, get_vq_num_min and get_vq_num_max will return the same
value, so that users can choose a correct value for that device.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/f4af5b0abd660d9a29ab6b2f67bd6df10284a230.1635493219.git.wuzongyong@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/4b5153262e4ba64986bb567d7425ad4829ca7bcc.1635493219.git.wuzongyong@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch introduces an attribute for vDPA device to indicate
whether virtual address can be used. If vDPA device driver set
it, vhost-vdpa bus driver will not pin user page and transfer
userspace virtual address instead of physical address during
DMA mapping. And corresponding vma->vm_file and offset will be
also passed as an opaque pointer.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-11-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add an opaque pointer for DMA mapping.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-9-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This adds a new callback to support device specific reset
behavior. The vdpa bus driver will call the reset function
instead of setting status to zero during resetting.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210831103634.33-6-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix some code indent issues and following checkpatch warning:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
371: FILE: include/linux/vdpa.h:371:
+static inline void vdpa_get_config(struct vdpa_device *vdev, unsigned offset,
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-5-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The return value of vdpa_alloc_device() macro is not very
clear, so that most of callers did the wrong check. Let's
add some comments to better document it.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210715080026.242-4-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
This patch extends the vdpa_vq_state to support packed virtqueue
state which is basically the device/driver ring wrap counters and the
avail and used index. This will be used for the virito-vdpa support
for the packed virtqueue and the future vhost/vhost-vdpa support for
the packed virtqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210602021536.39525-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
|
|
This new callback is used to get the size of the configuration space
of vDPA devices.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-9-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Follow comment style mentioned in the Writing kernel-doc document [1].
Following warnings are fixed.
$ scripts/kernel-doc -v -none include/linux/vdpa.h
include/linux/vdpa.h:11: warning: missing initial short description on line:
* vDPA callback definition.
include/linux/vdpa.h:11: info: Scanning doc for vDPA
include/linux/vdpa.h:15: warning: cannot understand function prototype: 'struct vdpa_callback '
include/linux/vdpa.h:21: warning: missing initial short description on line:
* vDPA notification area
include/linux/vdpa.h:21: info: Scanning doc for vDPA
include/linux/vdpa.h:25: warning: cannot understand function prototype: 'struct vdpa_notification_area '
include/linux/vdpa.h:31: warning: missing initial short description on line:
* vDPA vq_state definition
include/linux/vdpa.h:31: info: Scanning doc for vDPA
include/linux/vdpa.h:34: warning: cannot understand function prototype: 'struct vdpa_vq_state '
include/linux/vdpa.h:41: info: Scanning doc for vDPA device
include/linux/vdpa.h:51: warning: cannot understand function prototype: 'struct vdpa_device '
include/linux/vdpa.h:62: info: Scanning doc for vDPA IOVA range
include/linux/vdpa.h:66: warning: cannot understand function prototype: 'struct vdpa_iova_range '
include/linux/vdpa.h:72: info: Scanning doc for vDPA_config_ops
include/linux/vdpa.h:203: warning: cannot understand function prototype: 'struct vdpa_config_ops '
include/linux/vdpa.h:270: info: Scanning doc for vdpa_driver
include/linux/vdpa.h:275: warning: cannot understand function prototype: 'struct vdpa_driver '
include/linux/vdpa.h:347: info: Scanning doc for vdpa_mgmtdev_ops
include/linux/vdpa.h:360: warning: cannot understand function prototype: 'struct vdpa_mgmtdev_ops '
After this fix:
scripts/kernel-doc -v -none include/linux/vdpa.h
include/linux/vdpa.h:11: info: Scanning doc for struct vdpa_calllback
include/linux/vdpa.h:21: info: Scanning doc for struct vdpa_notification_area
include/linux/vdpa.h:31: info: Scanning doc for struct vdpa_vq_state
include/linux/vdpa.h:41: info: Scanning doc for struct vdpa_device
include/linux/vdpa.h:62: info: Scanning doc for struct vdpa_iova_range
include/linux/vdpa.h:72: info: Scanning doc for struct vdpa_config_ops
include/linux/vdpa.h:270: info: Scanning doc for struct vdpa_driver
include/linux/vdpa.h:347: info: Scanning doc for struct vdpa_mgmtdev_ops
[1] https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210406170457.98481-2-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
This patch delay the queue number setting to vDPA device
registering. This allows us to probe the virtqueue numbers between
device allocation and registering.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210223061905.422659-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add the ability to add and delete a vdpa device.
Examples:
Create a vdpa device of type network named "foo2" from
the management device vdpasim:
$ vdpa dev add mgmtdev vdpasim_net name foo2
Delete the vdpa device after its use:
$ vdpa dev del foo2
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To add one or more VDPA devices, define a management device which
allows adding or removing vdpa device. A management device defines
set of callbacks to manage vdpa devices.
To begin with, it defines add and remove callbacks through which a user
defined vdpa device can be added or removed.
A unique management device is identified by its unique handle identified
by management device name and optionally the bus name.
Hence, introduce routine through which driver can register a
management device and its callback operations for adding and remove
a vdpa device.
Introduce vdpa netlink socket family so that user can query management
device and its attributes.
Example of show vdpa management device which allows creating vdpa device of
networking class (device id = 0x1) of virtio specification 1.1
section 5.1.1.
$ vdpa mgmtdev show
vdpasim_net:
supported_classes:
net
Example of showing vdpa management device in JSON format.
$ vdpa mgmtdev show -jp
{
"show": {
"vdpasim_net": {
"supported_classes": [ "net" ]
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Including a bugfix:
vpda: correctly size vdpa_nl_policy
We need to ensure last entry of vdpa_nl_policy[]
is zero, otherwise out-of-bounds access is hurting us.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Eli Cohen <elic@nvidia.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
