summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2024-04-27PCI/ASPM: Fix deadlock when enabling ASPMJohan Hovold1-0/+5
commit 1e560864159d002b453da42bd2c13a1805515a20 upstream. A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 [bhelgaas: backported to v6.1.y, which contains b9c370b61d73 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()""), a backport of f93e71aea6c6. This omits the drivers/pci/controller/dwc/pcie-qcom.c hunk that updates qcom_pcie_enable_aspm(), which was added by 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops"), which is not present in v6.1.87.] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27bootconfig: use memblock_free_late to free xbc memory to buddyQiang Zhang1-1/+6
commit 89f9a1e876b5a7ad884918c03a46831af202c8a0 upstream. On the time to free xbc memory in xbc_exit(), memblock may has handed over memory to buddy allocator. So it doesn't make sense to free memory back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86. Following KASAN logs shows this case. This patch fixes the xbc memory free problem by calling memblock_free() in early xbc init error rewind path and calling memblock_free_late() in xbc exit path to free memory to buddy allocator. [ 9.410890] ================================================================== [ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260 [ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1 [ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 #5 [ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023 [ 9.460789] Call Trace: [ 9.463518] <TASK> [ 9.465859] dump_stack_lvl+0x53/0x70 [ 9.469949] print_report+0xce/0x610 [ 9.473944] ? __virt_addr_valid+0xf5/0x1b0 [ 9.478619] ? memblock_isolate_range+0x12d/0x260 [ 9.483877] kasan_report+0xc6/0x100 [ 9.487870] ? memblock_isolate_range+0x12d/0x260 [ 9.493125] memblock_isolate_range+0x12d/0x260 [ 9.498187] memblock_phys_free+0xb4/0x160 [ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10 [ 9.508021] ? mutex_unlock+0x7e/0xd0 [ 9.512111] ? __pfx_mutex_unlock+0x10/0x10 [ 9.516786] ? kernel_init_freeable+0x2d4/0x430 [ 9.521850] ? __pfx_kernel_init+0x10/0x10 [ 9.526426] xbc_exit+0x17/0x70 [ 9.529935] kernel_init+0x38/0x1e0 [ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30 [ 9.538601] ret_from_fork+0x2c/0x50 [ 9.542596] ? __pfx_kernel_init+0x10/0x10 [ 9.547170] ret_from_fork_asm+0x1a/0x30 [ 9.551552] </TASK> [ 9.555649] The buggy address belongs to the physical page: [ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30 [ 9.570821] flags: 0x200000000000000(node=0|zone=2) [ 9.576271] page_type: 0xffffffff() [ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000 [ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 [ 9.597476] page dumped because: kasan: bad access detected [ 9.605362] Memory state around the buggy address: [ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.634930] ^ [ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.654675] ================================================================== Link: https://lore.kernel.org/all/20240414114944.1012359-1-qiang4.zhang@linux.intel.com/ Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed") Cc: Stable@vger.kernel.org Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27usb: new quirk to reduce the SET_ADDRESS request timeoutHardik Gajjar1-0/+3
[ Upstream commit 5a1ccf0c72cf917ff3ccc131d1bb8d19338ffe52 ] This patch introduces a new USB quirk, USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value for the SET_ADDRESS request. The standard timeout for USB request/command is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1). However, certain scenarios, such as connecting devices through an APTIV hub, can lead to timeout errors when the device enumerates as full speed initially and later switches to high speed during chirp negotiation. In such cases, USB analyzer logs reveal that the bus suspends for 5 seconds due to incorrect chirp parsing and resumes only after two consecutive timeout errors trigger a hub driver reset. Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us) _______| Time Stamp(28 . 105 910 682) _______|_____________________________________________________________Ch0 Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us) _______| Time Stamp(28 . 106 910 632) _______|_____________________________________________________________Ch0 Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us) _______| Time Stamp(28 . 107 910 600) _______|_____________________________________________________________Ch0 Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms) _______| Time Stamp(28 . 108 532 832) _______|_____________________________________________________________Ch0 Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us) _______| Time Stamp(28 . 247 657 600) _______|_____________________________________________________________Ch0 This 5-second delay in device enumeration is undesirable, particularly in automotive applications where quick enumeration is crucial (ideally within 3 seconds). The newly introduced quirks provide the flexibility to align with a 3-second time limit, as required in specific contexts like automotive applications. By reducing the SET_ADDRESS request timeout to 500 ms, the system can respond more swiftly to errors, initiate rapid recovery, and ensure efficient device enumeration. This change is vital for scenarios where rapid smartphone enumeration and screen projection are essential. To use the quirk, please write "vendor_id:product_id:p" to /sys/bus/usb/drivers/hub/module/parameter/quirks For example, echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks" Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27usb: xhci: Add timeout argument in address_device USB HCD callbackHardik Gajjar1-2/+3
[ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ] - The HCD address_device callback now accepts a user-defined timeout value in milliseconds, providing better control over command execution times. - The default timeout value for the address_device command has been set to 5000 ms, aligning with the USB 3.2 specification. However, this timeout can be adjusted as needed. - The xhci_setup_device function has been updated to accept the timeout value, allowing it to specify the maximum wait time for the command operation to complete. - The hub driver has also been updated to accommodate the newly added timeout parameter during the SET_ADDRESS request. Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 5a1ccf0c72cf ("usb: new quirk to reduce the SET_ADDRESS request timeout") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27PCI: switchtec: Add support for PCIe Gen5 devicesKelvin Cao1-0/+1
[ Upstream commit 0fb53e64705ae0fabd9593102e0f0e6812968802 ] Advertise support of Gen5 devices in the driver's device ID table and add the same IDs for the switchtec quirks. Also update driver code to accommodate them. Link: https://lore.kernel.org/r/20230624000003.2315364-3-kelvin.cao@microchip.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27PCI: Delay after FLR of Solidigm P44 Pro NVMeMike Pastore1-0/+2
[ Upstream commit 0ac448e0d29d6ba978684b3fa2e3ac7294ec2475 ] Prevent KVM hang when a Solidgm P44 Pro NVMe is passed through to a guest via IOMMU and the guest is subsequently rebooted. A similar issue was identified and patched by 51ba09452d11 ("PCI: Delay after FLR of Intel DC P3700 NVMe") and the same fix can be applied for this case. (Intel spun off their NAND and SSD business as Solidigm and sold it to SK Hynix in late 2021.) Link: https://lore.kernel.org/r/20230507073519.9737-1-mike@oobak.org Signed-off-by: Mike Pastore <mike@oobak.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17irqflags: Explicitly ignore lockdep_hrtimer_exit() argumentArnd Bergmann1-1/+1
commit c1d11fc2c8320871b40730991071dd0a0b405bc8 upstream. When building with 'make W=1' but CONFIG_TRACE_IRQFLAGS=n, the unused argument to lockdep_hrtimer_exit() causes a warning: kernel/time/hrtimer.c:1655:14: error: variable 'expires_in_hardirq' set but not used [-Werror=unused-but-set-variable] This is intentional behavior, so add a cast to void to shut up the warning. Fixes: 73d20564e0dc ("hrtimer: Don't dereference the hrtimer pointer after the callback") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240408074609.3170807-1-arnd@kernel.org Closes: https://lore.kernel.org/oe-kbuild-all/202311191229.55QXHVc6-lkp@intel.com/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17u64_stats: fix u64_stats_init() for lockdep when used repeatedly in one filePetr Tesarik1-4/+5
[ Upstream commit 38a15d0a50e0a43778561a5861403851f0b0194c ] Fix bogus lockdep warnings if multiple u64_stats_sync variables are initialized in the same file. With CONFIG_LOCKDEP, seqcount_init() is a macro which declares: static struct lock_class_key __key; Since u64_stats_init() is a function (albeit an inline one), all calls within the same file end up using the same instance, effectively treating them all as a single lock-class. Fixes: 9464ca650008 ("net: make u64_stats_init() a function") Closes: https://lore.kernel.org/netdev/ea1567d9-ce66-45e6-8168-ac40a47d1821@roeck-us.net/ Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240404075740.30682-1-petr@tesarici.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17Revert "drm/qxl: simplify qxl_fence_wait"Alex Constantino1-0/+7
[ Upstream commit 07ed11afb68d94eadd4ffc082b97c2331307c5ea ] This reverts commit 5a838e5d5825c85556011478abde708251cc0776. Changes from commit 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait") would result in a '[TTM] Buffer eviction failed' exception whenever it reached a timeout. Due to a dependency to DMA_FENCE_WARN this also restores some code deleted by commit d72277b6c37d ("dma-buf: nuke DMA_FENCE_TRACE macros v2"). Fixes: 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait") Link: https://lore.kernel.org/regressions/ZTgydqRlK6WX_b29@eldamar.lan/ Reported-by: Timo Lindfors <timo.lindfors@iki.fi> Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1054514 Signed-off-by: Alex Constantino <dreaming.about.electric.sheep@gmail.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240404181448.1643-2-dreaming.about.electric.sheep@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13net: mpls: error out if inner headers are not setFlorian Westphal1-0/+5
commit 025f8ad20f2e3264d11683aa9cbbf0083eefbdcd upstream. mpls_gso_segment() assumes skb_inner_network_header() returns a valid result: mpls_hlen = skb_inner_network_header(skb) - skb_network_header(skb); if (unlikely(!mpls_hlen || mpls_hlen % MPLS_HLEN)) goto out; if (unlikely(!pskb_may_pull(skb, mpls_hlen))) With syzbot reproducer, skb_inner_network_header() yields 0, skb_network_header() returns 108, so this will "pskb_may_pull(skb, -108)))" which triggers a newly added DEBUG_NET_WARN_ON_ONCE() check: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 pskb_may_pull_reason include/linux/skbuff.h:2723 [inline] WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 pskb_may_pull include/linux/skbuff.h:2739 [inline] WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 mpls_gso_segment+0x773/0xaa0 net/mpls/mpls_gso.c:34 [..] skb_mac_gso_segment+0x383/0x740 net/core/gso.c:53 nsh_gso_segment+0x40a/0xad0 net/nsh/nsh.c:108 skb_mac_gso_segment+0x383/0x740 net/core/gso.c:53 __skb_gso_segment+0x324/0x4c0 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] [..] sch_direct_xmit+0x11a/0x5f0 net/sched/sch_generic.c:327 [..] packet_sendmsg+0x46a9/0x6130 net/packet/af_packet.c:3113 [..] First iteration of this patch made mpls_hlen signed and changed test to error out to "mpls_hlen <= 0 || ..". Eric Dumazet said: > I was thinking about adding a debug check in skb_inner_network_header() > if inner_network_header is zero (that would mean it is not 'set' yet), > but this would trigger even after your patch. So add new skb_inner_network_header_was_set() helper and use that. The syzbot reproducer injects data via packet socket. The skb that gets allocated and passed down the stack has ->protocol set to NSH (0x894f) and gso_type set to SKB_GSO_UDP | SKB_GSO_DODGY. This gets passed to skb_mac_gso_segment(), which sees NSH as ptype to find a callback for. nsh_gso_segment() retrieves next type: proto = tun_p_to_eth_p(nsh_hdr(skb)->np); ... which is MPLS (TUN_P_MPLS_UC). It updates skb->protocol and then calls mpls_gso_segment(). Inner offsets are all 0, so mpls_gso_segment() ends up with a negative header size. In case more callers rely on silent handling of such large may_pull values we could also 'legalize' this behaviour, either replacing the debug check with (len > INT_MAX) test or removing it and instead adding a comment before existing if (unlikely(len > skb->len)) return SKB_DROP_REASON_PKT_TOO_SMALL; test in pskb_may_pull_reason(), saying that this check also implicitly takes care of callers that miscompute header sizes. Cc: Simon Horman <horms@kernel.org> Fixes: 219eee9c0d16 ("net: skbuff: add overflow debug check to pull/push helpers") Reported-by: syzbot+99d15fcdb0132a1e1a82@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/00000000000043b1310611e388aa@google.com/raw Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240222140321.14080-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13randomize_kstack: Improve entropy diffusionKees Cook1-1/+1
[ Upstream commit 9c573cd313433f6c1f7236fe64b9b743500c1628 ] The kstack_offset variable was really only ever using the low bits for kernel stack offset entropy. Add a ror32() to increase bit diffusion. Suggested-by: Arnd Bergmann <arnd@arndb.de> Fixes: 39218ff4c625 ("stack: Optionally randomize kernel stack offset each syscall") Link: https://lore.kernel.org/r/20240309202445.work.165-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13SUNRPC: increase size of rpc_wait_queue.qlen from unsigned short to unsigned intDai Ngo1-1/+1
[ Upstream commit 2c35f43b5a4b9cdfaa6fdd946f5a212615dac8eb ] When the NFS client is under extreme load the rpc_wait_queue.qlen counter can be overflowed. Here is an instant of the backlog queue overflow in a real world environment shown by drgn helper: rpc_task_stats(rpc_clnt): ------------------------- rpc_clnt: 0xffff92b65d2bae00 rpc_xprt: 0xffff9275db64f000 Queue: sending[64887] pending[524] backlog[30441] binding[0] XMIT task: 0xffff925c6b1d8e98 WRITE: 750654 __dta_call_status_580: 65463 __dta_call_transmit_status_579: 1 call_reserveresult: 685189 nfs_client_init_is_complete: 1 COMMIT: 584 call_reserveresult: 573 __dta_call_status_580: 11 ACCESS: 1 __dta_call_status_580: 1 GETATTR: 10 __dta_call_status_580: 4 call_reserveresult: 6 751249 tasks for server 111.222.333.444 Total tasks: 751249 count_rpc_wait_queues(xprt): ---------------------------- **** rpc_xprt: 0xffff9275db64f000 num_reqs: 65511 wait_queue: xprt_binding[0] cnt: 0 wait_queue: xprt_binding[1] cnt: 0 wait_queue: xprt_binding[2] cnt: 0 wait_queue: xprt_binding[3] cnt: 0 rpc_wait_queue[xprt_binding].qlen: 0 maxpriority: 0 wait_queue: xprt_sending[0] cnt: 0 wait_queue: xprt_sending[1] cnt: 64887 wait_queue: xprt_sending[2] cnt: 0 wait_queue: xprt_sending[3] cnt: 0 rpc_wait_queue[xprt_sending].qlen: 64887 maxpriority: 3 wait_queue: xprt_pending[0] cnt: 524 wait_queue: xprt_pending[1] cnt: 0 wait_queue: xprt_pending[2] cnt: 0 wait_queue: xprt_pending[3] cnt: 0 rpc_wait_queue[xprt_pending].qlen: 524 maxpriority: 0 wait_queue: xprt_backlog[0] cnt: 0 wait_queue: xprt_backlog[1] cnt: 685801 wait_queue: xprt_backlog[2] cnt: 0 wait_queue: xprt_backlog[3] cnt: 0 rpc_wait_queue[xprt_backlog].qlen: 30441 maxpriority: 3 [task cnt mismatch] There is no effect on operations when this overflow occurs. However it causes confusion when trying to diagnose the performance problem. Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13rcu-tasks: Repair RCU Tasks Trace quiescence checkPaul E. McKenney1-2/+2
[ Upstream commit 2eb52fa8900e642b3b5054c4bf9776089d2a935f ] The context-switch-time check for RCU Tasks Trace quiescence expects current->trc_reader_special.b.need_qs to be zero, and if so, updates it to TRC_NEED_QS_CHECKED. This is backwards, because if this value is zero, there is no RCU Tasks Trace grace period in flight, an thus no need for a quiescent state. Instead, when a grace period starts, this field is set to TRC_NEED_QS. This commit therefore changes the check from zero to TRC_NEED_QS. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13net: skbuff: add overflow debug check to pull/push helpersFlorian Westphal1-0/+6
[ Upstream commit 219eee9c0d16f1b754a8b85275854ab17df0850a ] syzbot managed to trigger following splat: BUG: KASAN: use-after-free in __skb_flow_dissect+0x4a3b/0x5e50 Read of size 1 at addr ffff888208a4000e by task a.out/2313 [..] __skb_flow_dissect+0x4a3b/0x5e50 __skb_get_hash+0xb4/0x400 ip_tunnel_xmit+0x77e/0x26f0 ipip_tunnel_xmit+0x298/0x410 .. Analysis shows that the skb has a valid ->head, but bogus ->data pointer. skb->data gets its bogus value via the neigh layer, which does: 1556 __skb_pull(skb, skb_network_offset(skb)); ... and the skb was already dodgy at this point: skb_network_offset(skb) returns a negative value due to an earlier overflow of skb->network_header (u16). __skb_pull thus "adjusts" skb->data by a huge offset, pointing outside skb->head area. Allow debug builds to splat when we try to pull/push more than INT_MAX bytes. After this, the syzkaller reproducer yields a more precise splat before the flow dissector attempts to read off skb->data memory: WARNING: CPU: 5 PID: 2313 at include/linux/skbuff.h:2653 neigh_connected_output+0x28e/0x400 ip_finish_output2+0xb25/0xed0 iptunnel_xmit+0x4ff/0x870 ipgre_xmit+0x78e/0xbb0 Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240216113700.23013-1-fw@strlen.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10mm/secretmem: fix GUP-fast succeeding on secretmem foliosDavid Hildenbrand1-2/+2
commit 65291dcfcf8936e1b23cfd7718fdfde7cfaf7706 upstream. folio_is_secretmem() currently relies on secretmem folios being LRU folios, to save some cycles. However, folios might reside in a folio batch without the LRU flag set, or temporarily have their LRU flag cleared. Consequently, the LRU flag is unreliable for this purpose. In particular, this is the case when secretmem_fault() allocates a fresh page and calls filemap_add_folio()->folio_add_lru(). The folio might be added to the per-cpu folio batch and won't get the LRU flag set until the batch was drained using e.g., lru_add_drain(). Consequently, folio_is_secretmem() might not detect secretmem folios and GUP-fast can succeed in grabbing a secretmem folio, crashing the kernel when we would later try reading/writing to the folio, because the folio has been unmapped from the directmap. Fix it by removing that unreliable check. Link: https://lkml.kernel.org/r/20240326143210.291116-2-david@redhat.com Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: xingwei lee <xrivendell7@gmail.com> Reported-by: yue sun <samsun1006219@gmail.com> Closes: https://lore.kernel.org/lkml/CABOYnLyevJeravW=QrH0JUPYEcDN160aZFb7kwndm-J2rmz0HQ@mail.gmail.com/ Debugged-by: Miklos Szeredi <miklos@szeredi.hu> Tested-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-10driver core: Introduce device_link_wait_removal()Herve Codina1-0/+1
commit 0462c56c290a99a7f03e817ae5b843116dfb575c upstream. The commit 80dd33cf72d1 ("drivers: base: Fix device link removal") introduces a workqueue to release the consumer and supplier devices used in the devlink. In the job queued, devices are release and in turn, when all the references to these devices are dropped, the release function of the device itself is called. Nothing is present to provide some synchronisation with this workqueue in order to ensure that all ongoing releasing operations are done and so, some other operations can be started safely. For instance, in the following sequence: 1) of_platform_depopulate() 2) of_overlay_remove() During the step 1, devices are released and related devlinks are removed (jobs pushed in the workqueue). During the step 2, OF nodes are destroyed but, without any synchronisation with devlink removal jobs, of_overlay_remove() can raise warnings related to missing of_node_put(): ERROR: memory leak, expected refcount 1 instead of 2 Indeed, the missing of_node_put() call is going to be done, too late, from the workqueue job execution. Introduce device_link_wait_removal() to offer a way to synchronize operations waiting for the end of devlink removals (i.e. end of workqueue jobs). Also, as a flushing operation is done on the workqueue, the workqueue used is moved from a system-wide workqueue to a local one. Cc: stable@vger.kernel.org Signed-off-by: Herve Codina <herve.codina@bootlin.com> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Saravana Kannan <saravanak@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240325152140.198219-2-herve.codina@bootlin.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-10udp: do not accept non-tunnel GSO skbs landing in a tunnelAntoine Tenart1-0/+28
commit 3d010c8031e39f5fa1e8b13ada77e0321091011f upstream. When rx-udp-gro-forwarding is enabled UDP packets might be GROed when being forwarded. If such packets might land in a tunnel this can cause various issues and udp_gro_receive makes sure this isn't the case by looking for a matching socket. This is performed in udp4/6_gro_lookup_skb but only in the current netns. This is an issue with tunneled packets when the endpoint is in another netns. In such cases the packets will be GROed at the UDP level, which leads to various issues later on. The same thing can happen with rx-gro-list. We saw this with geneve packets being GROed at the UDP level. In such case gso_size is set; later the packet goes through the geneve rx path, the geneve header is pulled, the offset are adjusted and frag_list skbs are not adjusted with regard to geneve. When those skbs hit skb_fragment, it will misbehave. Different outcomes are possible depending on what the GROed skbs look like; from corrupted packets to kernel crashes. One example is a BUG_ON[1] triggered in skb_segment while processing the frag_list. Because gso_size is wrong (geneve header was pulled) skb_segment thinks there is "geneve header size" of data in frag_list, although it's in fact the next packet. The BUG_ON itself has nothing to do with the issue. This is only one of the potential issues. Looking up for a matching socket in udp_gro_receive is fragile: the lookup could be extended to all netns (not speaking about performances) but nothing prevents those packets from being modified in between and we could still not find a matching socket. It's OK to keep the current logic there as it should cover most cases but we also need to make sure we handle tunnel packets being GROed too early. This is done by extending the checks in udp_unexpected_gso: GSO packets lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must be segmented. [1] kernel BUG at net/core/skbuff.c:4408! RIP: 0010:skb_segment+0xd2a/0xf70 __udp_gso_segment+0xaa/0x560 Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.") Fixes: 36707061d6ba ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-10inet: inet_defrag: prevent sk release while still in useFlorian Westphal1-6/+1
[ Upstream commit 18685451fc4e546fc0e718580d32df3c0e5c8272 ] ip_local_out() and other functions can pass skb->sk as function argument. If the skb is a fragment and reassembly happens before such function call returns, the sk must not be released. This affects skb fragments reassembled via netfilter or similar modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline. Eric Dumazet made an initial analysis of this bug. Quoting Eric: Calling ip_defrag() in output path is also implying skb_orphan(), which is buggy because output path relies on sk not disappearing. A relevant old patch about the issue was : 8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()") [..] net/ipv4/ip_output.c depends on skb->sk being set, and probably to an inet socket, not an arbitrary one. If we orphan the packet in ipvlan, then downstream things like FQ packet scheduler will not work properly. We need to change ip_defrag() to only use skb_orphan() when really needed, ie whenever frag_list is going to be used. Eric suggested to stash sk in fragment queue and made an initial patch. However there is a problem with this: If skb is refragmented again right after, ip_do_fragment() will copy head->sk to the new fragments, and sets up destructor to sock_wfree. IOW, we have no choice but to fix up sk_wmem accouting to reflect the fully reassembled skb, else wmem will underflow. This change moves the orphan down into the core, to last possible moment. As ip_defrag_offset is aliased with sk_buff->sk member, we must move the offset into the FRAG_CB, else skb->sk gets clobbered. This allows to delay the orphaning long enough to learn if the skb has to be queued or if the skb is completing the reasm queue. In the former case, things work as before, skb is orphaned. This is safe because skb gets queued/stolen and won't continue past reasm engine. In the latter case, we will steal the skb->sk reference, reattach it to the head skb, and fix up wmem accouting when inet_frag inflates truesize. Fixes: 7026b1ddb6b8 ("netfilter: Pass socket pointer down through okfn().") Diagnosed-by: Eric Dumazet <edumazet@google.com> Reported-by: xingwei lee <xrivendell7@gmail.com> Reported-by: yue sun <samsun1006219@gmail.com> Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240326101845.30836-1-fw@strlen.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03scsi: sd: Fix TCG OPAL unlock on system resumeDamien Le Moal1-0/+1
commit 0c76106cb97548810214def8ee22700bbbb90543 upstream. Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") introduced the manage_system_start_stop scsi_device flag to allow libata to indicate to the SCSI disk driver that nothing should be done when resuming a disk on system resume. This change turned the execution of sd_resume() into a no-op for ATA devices on system resume. While this solved deadlock issues during device resume, this change also wrongly removed the execution of opal_unlock_from_suspend(). As a result, devices with TCG OPAL locking enabled remain locked and inaccessible after a system resume from sleep. To fix this issue, introduce the SCSI driver resume method and implement it with the sd_resume() function calling opal_unlock_from_suspend(). The former sd_resume() function is renamed to sd_resume_common() and modified to call the new sd_resume() function. For non-ATA devices, this result in no functional changes. In order for libata to explicitly execute sd_resume() when a device is resumed during system restart, the function scsi_resume_device() is introduced. libata calls this function from the revalidation work executed on devie resume, a state that is indicated with the new device flag ATA_DFLAG_RESUMING. Doing so, locked TCG OPAL enabled devices are unlocked on resume, allowing normal operation. Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218538 Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240319071209.1179257-1-dlemoal@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03vfio: Introduce interface to flush virqfd inject workqueueAlex Williamson1-0/+2
[ Upstream commit b620ecbd17a03cacd06f014a5d3f3a11285ce053 ] In order to synchronize changes that can affect the thread callback, introduce an interface to force a flush of the inject workqueue. The irqfd pointer is only valid under spinlock, but the workqueue cannot be flushed under spinlock. Therefore the flush work for the irqfd is queued under spinlock. The vfio_irqfd_cleanup_wq workqueue is re-used for queuing this work such that flushing the workqueue is also ordered relative to shutdown. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20240308230557.805580-4-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03minmax: add umin(a, b) and umax(a, b)David Laight1-0/+17
[ Upstream commit 80fcac55385ccb710d33a20dc1caaef29bd5a921 ] Patch series "minmax: Relax type checks in min() and max()", v4. The min() (etc) functions in minmax.h require that the arguments have exactly the same types. However when the type check fails, rather than look at the types and fix the type of a variable/constant, everyone seems to jump on min_t(). In reality min_t() ought to be rare - when something unusual is being done, not normality. The orginal min() (added in 2.4.9) replaced several inline functions and included the type - so matched the implicit casting of the function call. This was renamed min_t() in 2.4.10 and the current min() added. There is no actual indication that the conversion of negatve values to large unsigned values has ever been an actual problem. A quick grep shows 5734 min() and 4597 min_t(). Having the casts on almost half of the calls shows that something is clearly wrong. If the wrong type is picked (and it is far too easy to pick the type of the result instead of the larger input) then significant bits can get discarded. Pretty much the worst example is in the derived clamp_val(), consider: unsigned char x = 200u; y = clamp_val(x, 10u, 300u); I also suspect that many of the min_t(u16, ...) are actually wrong. For example copy_data() in printk_ringbuffer.c contains: data_size = min_t(u16, buf_size, len); Here buf_size is 'unsigned int' and len 'u16', pass a 64k buffer (can you prove that doesn't happen?) and no data is returned. Apparantly it did - and has since been fixed. The only reason that most of the min_t() are 'fine' is that pretty much all the values in the kernel are between 0 and INT_MAX. Patch 1 adds umin(), this uses integer promotions to convert both arguments to 'unsigned long long'. It can be used to compare a signed type that is known to contain a non-negative value with an unsigned type. The compiler typically optimises it all away. Added first so that it can be referred to in patch 2. Patch 2 replaces the 'same type' check with a 'same signedness' one. This makes min(unsigned_int_var, sizeof()) be ok. The error message is also improved and will contain the expanded form of both arguments (useful for seeing how constants are defined). Patch 3 just fixes some whitespace. Patch 4 allows comparisons of 'unsigned char' and 'unsigned short' to signed types. The integer promotion rules convert them both to 'signed int' prior to the comparison so they can never cause a negative value be converted to a large positive one. Patch 5 (rewritted for v4) allows comparisons of unsigned values against non-negative constant integer expressions. This makes min(unsigned_int_var, 4) be ok. The only common case that is still errored is the comparison of signed values against unsigned constant integer expressions below __INT_MAX__. Typcally min(int_val, sizeof (foo)), the real fix for this is casting the constant: min(int_var, (int)sizeof (foo)). With all the patches applied pretty much all the min_t() could be replaced by min(), and most of the rest by umin(). However they all need careful inspection due to code like: sz = min_t(unsigned char, sz - 1, LIM - 1) + 1; which converts 0 to LIM. This patch (of 6): umin() and umax() can be used when min()/max() errors a signed v unsigned compare when the signed value is known to be non-negative. Unlike min_t(some_unsigned_type, a, b) umin() will never mask off high bits if an inappropriate type is selected. The '+ 0u + 0ul + 0ull' may look strange. The '+ 0u' is needed for 'signed int' on 64bit systems. The '+ 0ul' is needed for 'signed long' on 32bit systems. The '+ 0ull' is needed for 'signed long long'. Link: https://lkml.kernel.org/r/b97faef60ad24922b530241c5d7c933c@AcuMS.aculab.com Link: https://lkml.kernel.org/r/41d93ca827a248698ec64bf57e0c05a5@AcuMS.aculab.com Signed-off-by: David Laight <david.laight@aculab.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: 51b30ecb73b4 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL ↵Vlastimil Babka1-0/+9
allocations commit 803de9000f334b771afacb6ff3e78622916668b0 upstream. Sven reports an infinite loop in __alloc_pages_slowpath() for costly order __GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination can happen in a suspend/resume context where a GFP_KERNEL allocation can have __GFP_IO masked out via gfp_allowed_mask. Quoting Sven: 1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER) with __GFP_RETRY_MAYFAIL set. 2. page alloc's __alloc_pages_slowpath tries to get a page from the freelist. This fails because there is nothing free of that costly order. 3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim, which bails out because a zone is ready to be compacted; it pretends to have made a single page of progress. 4. page alloc tries to compact, but this always bails out early because __GFP_IO is not set (it's not passed by the snd allocator, and even if it were, we are suspending so the __GFP_IO flag would be cleared anyway). 5. page alloc believes reclaim progress was made (because of the pretense in item 3) and so it checks whether it should retry compaction. The compaction retry logic thinks it should try again, because: a) reclaim is needed because of the early bail-out in item 4 b) a zonelist is suitable for compaction 6. goto 2. indefinite stall. (end quote) The immediate root cause is confusing the COMPACT_SKIPPED returned from __alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be indicating a lack of order-0 pages, and in step 5 evaluating that in should_compact_retry() as a reason to retry, before incrementing and limiting the number of retries. There are however other places that wrongly assume that compaction can happen while we lack __GFP_IO. To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO evaluation and switch the open-coded test in try_to_compact_pages() to use it. Also use the new helper in: - compaction_ready(), which will make reclaim not bail out in step 3, so there's at least one attempt to actually reclaim, even if chances are small for a costly order - in_reclaim_compaction() which will make should_continue_reclaim() return false and we don't over-reclaim unnecessarily - in __alloc_pages_slowpath() to set a local variable can_compact, which is then used to avoid retrying reclaim/compaction for costly allocations (step 5) if we can't compact and also to skip the early compaction attempt that we do in some cases Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz Fixes: 3250845d0526 ("Revert "mm, oom: prevent premature OOM killer invocation for high order request"") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Sven van Ashbrook <svenva@chromium.org> Closes: https://lore.kernel.org/all/CAG-rBihs_xMKb3wrMO1%2B-%2Bp4fowP9oy1pa_OTkfxBzPUVOZF%2Bg@mail.gmail.com/ Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Curtis Malainey <cujomalainey@chromium.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memoryMichael Kelley1-1/+21
commit b8209544296edbd1af186e2ea9c648642c37b18c upstream. The VMBUS_RING_SIZE macro adds space for a ring buffer header to the requested ring buffer size. The header size is always 1 page, and so its size varies based on the PAGE_SIZE for which the kernel is built. If the requested ring buffer size is a large power-of-2 size and the header size is small, the resulting size is inefficient in its use of memory. For example, a 512 Kbyte ring buffer with a 4 Kbyte page size results in a 516 Kbyte allocation, which is rounded to up 1 Mbyte by the memory allocator, and wastes 508 Kbytes of memory. In such situations, the exact size of the ring buffer isn't that important, and it's OK to allocate the 4 Kbyte header at the beginning of the 512 Kbytes, leaving the ring buffer itself with just 508 Kbytes. The memory allocation can be 512 Kbytes instead of 1 Mbyte and nothing is wasted. Update VMBUS_RING_SIZE to implement this approach for "large" ring buffer sizes. "Large" is somewhat arbitrarily defined as 8 times the size of the ring buffer header (which is of size PAGE_SIZE). For example, for 4 Kbyte PAGE_SIZE, ring buffers of 32 Kbytes and larger use the first 4 Kbytes as the ring buffer header. For 64 Kbyte PAGE_SIZE, ring buffers of 512 Kbytes and larger use the first 64 Kbytes as the ring buffer header. In both cases, smaller sizes add space for the header so the ring size isn't reduced too much by using part of the space for the header. For example, with a 64 Kbyte page size, we don't want a 128 Kbyte ring buffer to be reduced to 64 Kbytes by allocating half of the space for the header. In such a case, the memory allocation is less efficient, but it's the best that can be done. While the new algorithm slightly changes the amount of space allocated for ring buffers by drivers that use VMBUS_RING_SIZE, the devices aren't known to be sensitive to small changes in ring buffer size, so there shouldn't be any effect. Fixes: c1135c7fd0e9 ("Drivers: hv: vmbus: Introduce types of GPADL") Fixes: 6941f67ad37d ("hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218502 Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Tested-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Link: https://lore.kernel.org/r/20240229004533.313662-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240229004533.313662-1-mhklinux@outlook.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03ring-buffer: Use wait_event_interruptible() in ring_buffer_wait()Steven Rostedt (Google)1-0/+1
[ Upstream commit 7af9ded0c2caac0a95f33df5cb04706b0f502588 ] Convert ring_buffer_wait() over to wait_event_interruptible(). The default condition is to execute the wait loop inside __wait_event() just once. This does not change the ring_buffer_wait() prototype yet, but restructures the code so that it can take a "cond" and "data" parameter and will call wait_event_interruptible() with a helper function as the condition. The helper function (rb_wait_cond) takes the cond function and data parameters. It will first check if the buffer hit the watermark defined by the "full" parameter and then call the passed in condition parameter. If either are true, it returns true. If rb_wait_cond() does not return true, it will set the appropriate "waiters_pending" flag and returns false. Link: https://lore.kernel.org/linux-trace-kernel/CAHk-=wgsNgewHFxZAJiAQznwPMqEtQmi1waeS2O1v6L4c_Um5A@mail.gmail.com/ Link: https://lore.kernel.org/linux-trace-kernel/20240312121703.399598519@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linke li <lilinke99@qq.com> Cc: Rabin Vincent <rabin@rab.in> Fixes: f3ddb74ad0790 ("tracing: Wake up ring buffer waiters on closing of the file") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03nfs: fix UAF in direct writesJosef Bacik1-0/+1
[ Upstream commit 17f46b803d4f23c66cacce81db35fef3adb8f2af ] In production we have been hitting the following warning consistently ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0 Workqueue: nfsiod nfs_direct_write_schedule_work [nfs] RIP: 0010:refcount_warn_saturate+0x9c/0xe0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x9f/0x130 ? refcount_warn_saturate+0x9c/0xe0 ? report_bug+0xcc/0x150 ? handle_bug+0x3d/0x70 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0x9c/0xe0 nfs_direct_write_schedule_work+0x237/0x250 [nfs] process_one_work+0x12f/0x4a0 worker_thread+0x14e/0x3b0 ? ZSTD_getCParams_internal+0x220/0x220 kthread+0xdc/0x120 ? __btf_name_valid+0xa0/0xa0 ret_from_fork+0x1f/0x30 This is because we're completing the nfs_direct_request twice in a row. The source of this is when we have our commit requests to submit, we process them and send them off, and then in the completion path for the commit requests we have if (nfs_commit_end(cinfo.mds)) nfs_direct_write_complete(dreq); However since we're submitting asynchronous requests we sometimes have one that completes before we submit the next one, so we end up calling complete on the nfs_direct_request twice. The only other place we use nfs_generic_commit_list() is in __nfs_commit_inode, which wraps this call in a nfs_commit_begin(); nfs_commit_end(); Which is a common pattern for this style of completion handling, one that is also repeated in the direct code with get_dreq()/put_dreq() calls around where we process events as well as in the completion paths. Fix this by using the same pattern for the commit requests. Before with my 200 node rocksdb stress running this warning would pop every 10ish minutes. With my patch the stress test has been running for several hours without popping. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03phy: tegra: xusb: Add API to retrieve the port number of phyWayne Chang1-0/+1
[ Upstream commit d843f031d9e90462253015bc0bd9e3852d206bf2 ] This patch introduces a new API, tegra_xusb_padctl_get_port_number, to the Tegra XUSB Pad Controller driver. This API is used to identify the USB port that is associated with a given PHY. The function takes a PHY pointer for either a USB2 PHY or USB3 PHY as input and returns the corresponding port number. If the PHY pointer is invalid, it returns -ENODEV. Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang <waynec@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20240307030328.1487748-2-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03cpufreq: Limit resolving a frequency to policy min/maxShivnandan Kumar1-1/+14
[ Upstream commit d394abcb12bb1a6f309c1221fdb8e73594ecf1b4 ] Resolving a frequency to an efficient one should not transgress policy->max (which can be set for thermal reason) and policy->min. Currently, there is possibility where scaling_cur_freq can exceed scaling_max_freq when scaling_max_freq is an inefficient frequency. Add a check to ensure that resolving a frequency will respect policy->min/max. Cc: All applicable <stable@vger.kernel.org> Fixes: 1f39fa0dccff ("cpufreq: Introducing CPUFREQ_RELATION_E") Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com> [ rjw: Whitespace adjustment, changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03timers: Rename del_timer_sync() to timer_delete_sync()Thomas Gleixner1-1/+14
[ Upstream commit 9b13df3fb64ee95e2397585404e442afee2c7d4f ] The timer related functions do not have a strict timer_ prefixed namespace which is really annoying. Rename del_timer_sync() to timer_delete_sync() and provide del_timer_sync() as a wrapper. Document that del_timer_sync() is not for new code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Link: https://lore.kernel.org/r/20221123201624.954785441@linutronix.de Stable-dep-of: 0f7352557a35 ("wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03timers: Use del_timer_sync() even on UPThomas Gleixner1-6/+1
[ Upstream commit 168f6b6ffbeec0b9333f3582e4cf637300858db5 ] del_timer_sync() is assumed to be pointless on uniprocessor systems and can be mapped to del_timer() because in theory del_timer() can never be invoked while the timer callback function is executed. This is not entirely true because del_timer() can be invoked from interrupt context and therefore hit in the middle of a running timer callback. Contrary to that del_timer_sync() is not allowed to be invoked from interrupt context unless the affected timer is marked with TIMER_IRQSAFE. del_timer_sync() has proper checks in place to detect such a situation. Give up on the UP optimization and make del_timer_sync() unconditionally available. Co-developed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Link: https://lore.kernel.org/all/20220407161745.7d6754b3@gandalf.local.home Link: https://lore.kernel.org/all/20221110064101.429013735@goodmis.org Link: https://lore.kernel.org/r/20221123201624.888306160@linutronix.de Stable-dep-of: 0f7352557a35 ("wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27dm io: Support IO priorityHongyu Jin1-1/+2
[ Upstream commit 6e5f0f6383b4896c7e9b943d84b136149d0f45e9 ] Some IO will dispatch from kworker with different io_context settings than the submitting task, we may need to specify a priority to avoid losing priority. Add IO priority parameter to dm_io() and update all callers. Co-developed-by: Yibin Ding <yibin.ding@unisoc.com> Signed-off-by: Yibin Ding <yibin.ding@unisoc.com> Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Stable-dep-of: b4d78cfeb304 ("dm-integrity: align the outgoing bio in integrity_recheck") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27rcu: add a helper to report consolidated flavor QSYan Zhai1-0/+31
[ Upstream commit 1a77557d48cff187a169c2aec01c0dd78a5e7e50 ] When under heavy load, network processing can run CPU-bound for many tens of seconds. Even in preemptible kernels (non-RT kernel), this can block RCU Tasks grace periods, which can cause trace-event removal to take more than a minute, which is unacceptably long. This commit therefore creates a new helper function that passes through both RCU and RCU-Tasks quiescent states every 100 milliseconds. This hard-coded value suffices for current workloads. Suggested-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Yan Zhai <yan@cloudflare.com> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/90431d46ee112d2b0af04dbfe936faaca11810a5.1710877680.git.yan@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: d6dbbb11247c ("net: report RCU QS on threaded NAPI repolling") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27modules: wait do_free_init correctlyChangbin Du1-0/+8
[ Upstream commit 8f8cd6c0a43ed637e620bbe45a8d0e0c2f4d5130 ] The synchronization here is to ensure the ordering of freeing of a module init so that it happens before W+X checking. It is worth noting it is not that the freeing was not happening, it is just that our sanity checkers raced against the permission checkers which assume init memory is already gone. Commit 1a7b7d922081 ("modules: Use vmalloc special flag") moved calling do_free_init() into a global workqueue instead of relying on it being called through call_rcu(..., do_free_init), which used to allowed us call do_free_init() asynchronously after the end of a subsequent grace period. The move to a global workqueue broke the gaurantees for code which needed to be sure the do_free_init() would complete with rcu_barrier(). To fix this callers which used to rely on rcu_barrier() must now instead use flush_work(&init_free_wq). Without this fix, we still could encounter false positive reports in W+X checking since the rcu_barrier() here can not ensure the ordering now. Even worse, the rcu_barrier() can introduce significant delay. Eric Chanudet reported that the rcu_barrier introduces ~0.1s delay on a PREEMPT_RT kernel. [ 0.291444] Freeing unused kernel memory: 5568K [ 0.402442] Run /sbin/init as init process With this fix, the above delay can be eliminated. Link: https://lkml.kernel.org/r/20240227023546.2490667-1-changbin.du@huawei.com Fixes: 1a7b7d922081 ("modules: Use vmalloc special flag") Signed-off-by: Changbin Du <changbin.du@huawei.com> Tested-by: Eric Chanudet <echanude@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Xiaoyi Su <suxiaoyi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27PCI: Make pci_dev_is_disconnected() helper public for other driversEthan Zhao1-0/+5
[ Upstream commit 39714fd73c6b60a8d27bcc5b431afb0828bf4434 ] Make pci_dev_is_disconnected() public so that it can be called from Intel VT-d driver to quickly fix/workaround the surprise removal unplug hang issue for those ATS capable devices on PCIe switch downstream hotplug capable ports. Beside pci_device_is_present() function, this one has no config space space access, so is light enough to optimize the normal pure surprise removal and safe removal flow. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Tested-by: Haorong Ye <yehaorong@bytedance.com> Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com> Link: https://lore.kernel.org/r/20240301080727.3529832-2-haifeng.zhao@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Stable-dep-of: 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctlyYonghong Song1-9/+12
[ Upstream commit 178c54666f9c4d2f49f2ea661d0c11b52f0ed190 ] Currently tracing is supposed not to allow for bpf_spin_{lock,unlock}() helper calls. This is to prevent deadlock for the following cases: - there is a prog (prog-A) calling bpf_spin_{lock,unlock}(). - there is a tracing program (prog-B), e.g., fentry, attached to bpf_spin_lock() and/or bpf_spin_unlock(). - prog-B calls bpf_spin_{lock,unlock}(). For such a case, when prog-A calls bpf_spin_{lock,unlock}(), a deadlock will happen. The related source codes are below in kernel/bpf/helpers.c: notrace BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock) notrace BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock) notrace is supposed to prevent fentry prog from attaching to bpf_spin_{lock,unlock}(). But actually this is not the case and fentry prog can successfully attached to bpf_spin_lock(). Siddharth Chintamaneni reported the issue in [1]. The following is the macro definition for above BPF_CALL_1: #define BPF_CALL_x(x, name, ...) \ static __always_inline \ u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \ typedef u64 (*btf_##name)(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \ u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)); \ u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)) \ { \ return ((btf_##name)____##name)(__BPF_MAP(x,__BPF_CAST,__BPF_N,__VA_ARGS__));\ } \ static __always_inline \ u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)) #define BPF_CALL_1(name, ...) BPF_CALL_x(1, name, __VA_ARGS__) The notrace attribute is actually applied to the static always_inline function ____bpf_spin_{lock,unlock}(). The actual callback function bpf_spin_{lock,unlock}() is not marked with notrace, hence allowing fentry prog to attach to two helpers, and this may cause the above mentioned deadlock. Siddharth Chintamaneni actually has a reproducer in [2]. To fix the issue, a new macro NOTRACE_BPF_CALL_1 is introduced which will add notrace attribute to the original function instead of the hidden always_inline function and this fixed the problem. [1] https://lore.kernel.org/bpf/CAE5sdEigPnoGrzN8WU7Tx-h-iFuMZgW06qp0KHWtpvoXxf1OAQ@mail.gmail.com/ [2] https://lore.kernel.org/bpf/CAE5sdEg6yUc_Jz50AnUXEEUh6O73yQ1Z6NV2srJnef0ZrQkZew@mail.gmail.com/ Fixes: d83525ca62cf ("bpf: introduce bpf_spin_lock") Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20240207070102.335167-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27fs/select: rework stack allocation hack for clangArnd Bergmann1-4/+0
[ Upstream commit ddb9fd7a544088ed70eccbb9f85e9cc9952131c1 ] A while ago, we changed the way that select() and poll() preallocate a temporary buffer just under the size of the static warning limit of 1024 bytes, as clang was frequently going slightly above that limit. The warnings have recently returned and I took another look. As it turns out, clang is not actually inherently worse at reserving stack space, it just happens to inline do_select() into core_sys_select(), while gcc never inlines it. Annotate do_select() to never be inlined and in turn remove the special case for the allocation size. This should give the same behavior for both clang and gcc all the time and once more avoids those warnings. Fixes: ad312f95d41c ("fs/select: avoid clang stack usage warning") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240216202352.2492798-1-arnd@kernel.org Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27RDMA/mlx5: Fix fortify source warning while accessing Eth segmentLeon Romanovsky1-1/+4
[ Upstream commit 4d5e86a56615cc387d21c629f9af8fb0e958d350 ] ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_64+0x59/0x90 ? do_user_addr_fault+0x1d0/0x640 ? exit_to_user_mode_prepare+0x3b/0xd0 ? irqentry_exit_to_user_mode+0x9/0x20 ? irqentry_exit+0x43/0x50 ? exc_page_fault+0x92/0x1b0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fc03ad14a37 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffdf8697fe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000008024 RCX: 00007fc03ad14a37 RDX: 0000000000008024 RSI: 0000556f46bd8270 RDI: 0000000000000003 RBP: 0000556f46bb1800 R08: 0000000000007fe3 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 0000556f46bc66b0 R14: 000000000000000a R15: 0000556f46bb2f50 </TASK> ---[ end trace 0000000000000000 ]--- Link: https://lore.kernel.org/r/8228ad34bd1a25047586270f7b1fb4ddcd046282.1706433934.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27nfsd: allow reaping files still under writebackJeff Layton1-0/+1
[ Upstream commit dcb779fcd4ed5984ad15991d574943d12a8693d1 ] On most filesystems, there is no reason to delay reaping an nfsd_file just because its underlying inode is still under writeback. nfsd just relies on client activity or the local flusher threads to do writeback. The main exception is NFS, which flushes all of its dirty data on last close. Add a new EXPORT_OP_FLUSH_ON_CLOSE flag to allow filesystems to signal that they do this, and only skip closing files under writeback on such filesystems. Also, remove a redundant NULL file pointer check in nfsd_file_check_writeback, and clean up nfs's export op flag definitions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com> [ cel: adjusted to apply to v6.1.y ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27io_uring: drop any code related to SCM_RIGHTSJens Axboe1-3/+0
Commit 6e5e6d274956305f1fc0340522b38f5f5be74bdb upstream. This is dead code after we dropped support for passing io_uring fds over SCM_RIGHTS, get rid of it. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27io_uring/unix: drop usage of io_uring socketJens Axboe1-5/+5
Commit a4104821ad651d8a0b374f0b2474c345bbb42f82 upstream. Since we no longer allow sending io_uring fds over SCM_RIGHTS, move to using io_is_uring_fops() to detect whether this is a io_uring fd or not. With that done, kill off io_uring_get_socket() as nobody calls it anymore. This is in preparation to yanking out the rest of the core related to unix gc with io_uring. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15x86/rfds: Mitigate Register File Data Sampling (RFDS)Pawan Gupta1-0/+2
commit 8076fcde016c9c0e0660543e67bff86cb48a7c9c upstream. RFDS is a CPU vulnerability that may allow userspace to infer kernel stale data previously used in floating point registers, vector registers and integer registers. RFDS only affects certain Intel Atom processors. Intel released a microcode update that uses VERW instruction to clear the affected CPU buffers. Unlike MDS, none of the affected cores support SMT. Add RFDS bug infrastructure and enable the VERW based mitigation by default, that clears the affected buffers just before exiting to userspace. Also add sysfs reporting and cmdline parameter "reg_file_data_sampling" to control the mitigation. For details see: Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-15ceph: switch to corrected encoding of max_xattr_size in mdsmapXiubo Li1-1/+5
[ Upstream commit 51d31149a88b5c5a8d2d33f06df93f6187a25b4c ] The addition of bal_rank_mask with encoding version 17 was merged into ceph.git in Oct 2022 and made it into v18.2.0 release normally. A few months later, the much delayed addition of max_xattr_size got merged, also with encoding version 17, placed before bal_rank_mask in the encoding -- but it didn't make v18.2.0 release. The way this ended up being resolved on the MDS side is that bal_rank_mask will continue to be encoded in version 17 while max_xattr_size is now encoded in version 18. This does mean that older kernels will misdecode version 17, but this is also true for v18.2.0 and v18.2.1 clients in userspace. The best we can do is backport this adjustment -- see ceph.git commit 78abfeaff27fee343fb664db633de5b221699a73 for details. [ idryomov: changelog ] Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/64440 Fixes: d93231a6bc8a ("ceph: prevent a client from exceeding the MDS maximum xattr size") Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@ibm.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-06block: define bvec_iter as __packed __aligned(4)Ming Lei1-1/+1
[ Upstream commit 7838b4656110d950afdd92a081cc0f33e23e0ea8 ] In commit 19416123ab3e ("block: define 'struct bvec_iter' as packed"), what we need is to save the 4byte padding, and avoid `bio` to spread on one extra cache line. It is enough to define it as '__packed __aligned(4)', as '__packed' alone means byte aligned, and can cause compiler to generate horrible code on architectures that don't support unaligned access in case that bvec_iter is embedded in other structures. Cc: Mikulas Patocka <mpatocka@redhat.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 19416123ab3e ("block: define 'struct bvec_iter' as packed") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-06efi/libstub: Add memory attribute protocol definitionsArd Biesheuvel1-0/+1
From: Evgeniy Baskov <baskov@ispras.ru> [ Commit 79729f26b074a5d2722c27fa76cc45ef721e65cd upstream ] EFI_MEMORY_ATTRIBUTE_PROTOCOL servers as a better alternative to DXE services for setting memory attributes in EFI Boot Services environment. This protocol is better since it is a part of UEFI specification itself and not UEFI PI specification like DXE services. Add EFI_MEMORY_ATTRIBUTE_PROTOCOL definitions. Support mixed mode properly for its calls. Tested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Evgeniy Baskov <baskov@ispras.ru> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-06NFSD: add delegation reaper to react to low memory conditionDai Ngo1-0/+13
[ Upstream commit 44df6f439a1790a5f602e3842879efa88f346672 ] The delegation reaper is called by nfsd memory shrinker's on the 'count' callback. It scans the client list and sends the courtesy CB_RECALL_ANY to the clients that hold delegations. To avoid flooding the clients with CB_RECALL_ANY requests, the delegation reaper sends only one CB_RECALL_ANY request to each client per 5 seconds. Signed-off-by: Dai Ngo <dai.ngo@oracle.com> [ cel: moved definition of RCA4_TYPE_MASK_RDATA_DLG ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-06filelock: add a new locks_inode_context accessor functionJeff Layton1-0/+14
[ Upstream commit 401a8b8fd5acd51582b15238d72a8d0edd580e9f ] There are a number of places in the kernel that are accessing the inode->i_flctx field without smp_load_acquire. This is required to ensure that the caller doesn't see a partially-initialized structure. Add a new accessor function for it to make this clear and convert all of the relevant accesses in locks.c to use it. Also, convert locks_free_lock_context to use the helper as well instead of just doing a "bare" assignment. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Layton <jlayton@kernel.org> Stable-dep-of: 77c67530e1f9 ("nfsd: use locks_inode_context helper") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-06decompress: Use 8 byte alignmentArd Biesheuvel1-1/+1
commit 8217ad0a435ff06d651d7298ea8ae8d72388179e upstream. The ZSTD decompressor requires malloc() allocations to be 8 byte aligned, so ensure that this the case. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230807162720.545787-19-ardb@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-06netfilter: bridge: confirm multicast packets before passing them up the stackFlorian Westphal1-0/+1
[ Upstream commit 62e7151ae3eb465e0ab52a20c941ff33bb6332e9 ] conntrack nf_confirm logic cannot handle cloned skbs referencing the same nf_conn entry, which will happen for multicast (broadcast) frames on bridges. Example: macvlan0 | br0 / \ ethX ethY ethX (or Y) receives a L2 multicast or broadcast packet containing an IP packet, flow is not yet in conntrack table. 1. skb passes through bridge and fake-ip (br_netfilter)Prerouting. -> skb->_nfct now references a unconfirmed entry 2. skb is broad/mcast packet. bridge now passes clones out on each bridge interface. 3. skb gets passed up the stack. 4. In macvlan case, macvlan driver retains clone(s) of the mcast skb and schedules a work queue to send them out on the lower devices. The clone skb->_nfct is not a copy, it is the same entry as the original skb. The macvlan rx handler then returns RX_HANDLER_PASS. 5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb. The Macvlan broadcast worker and normal confirm path will race. This race will not happen if step 2 already confirmed a clone. In that case later steps perform skb_clone() with skb->_nfct already confirmed (in hash table). This works fine. But such confirmation won't happen when eb/ip/nftables rules dropped the packets before they reached the nf_confirm step in postrouting. Pablo points out that nf_conntrack_bridge doesn't allow use of stateful nat, so we can safely discard the nf_conn entry and let inet call conntrack again. This doesn't work for bridge netfilter: skb could have a nat transformation. Also bridge nf prevents re-invocation of inet prerouting via 'sabotage_in' hook. Work around this problem by explicit confirmation of the entry at LOCAL_IN time, before upper layer has a chance to clone the unconfirmed entry. The downside is that this disables NAT and conntrack helpers. Alternative fix would be to add locking to all code parts that deal with unconfirmed packets, but even if that could be done in a sane way this opens up other problems, for example: -m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4 -m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5 For multicast case, only one of such conflicting mappings will be created, conntrack only handles 1:1 NAT mappings. Users should set create a setup that explicitly marks such traffic NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass them, ruleset might have accept rules for untracked traffic already, so user-visible behaviour would change. Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217777 Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-06netfilter: let reset rules clean out conntrack entriesFlorian Westphal1-0/+3
[ Upstream commit 2954fe60e33da0f4de4d81a4c95c7dddb517d00c ] iptables/nftables support responding to tcp packets with tcp resets. The generated tcp reset packet passes through both output and postrouting netfilter hooks, but conntrack will never see them because the generated skb has its ->nfct pointer copied over from the packet that triggered the reset rule. If the reset rule is used for established connections, this may result in the conntrack entry to be around for a very long time (default timeout is 5 days). One way to avoid this would be to not copy the nf_conn pointer so that the rest packet passes through conntrack too. Problem is that output rules might not have the same conntrack zone setup as the prerouting ones, so its possible that the reset skb won't find the correct entry. Generating a template entry for the skb seems error prone as well. Add an explicit "closing" function that switches a confirmed conntrack entry to closed state and wire this up for tcp. If the entry isn't confirmed, no action is needed because the conntrack entry will never be committed to the table. Reported-by: Russel King <linux@armlinux.org.uk> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Stable-dep-of: 62e7151ae3eb ("netfilter: bridge: confirm multicast packets before passing them up the stack") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-06usb: gadget: Properly configure the device for remote wakeupElson Roy Serrao2-0/+10
[ Upstream commit b93c2a68f3d9dc98ec30dcb342ae47c1c8d09d18 ] The wakeup bit in the bmAttributes field indicates whether the device is configured for remote wakeup. But this field should be allowed to set only if the UDC supports such wakeup mechanism. So configure this field based on UDC capability. Also inform the UDC whether the device is configured for remote wakeup by implementing a gadget op. Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Link: https://lore.kernel.org/r/1679694482-16430-2-git-send-email-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaioBart Van Assche1-0/+2
commit b820de741ae48ccf50dd95e297889c286ff4f760 upstream. If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. Suggested-by: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: Avi Kivity <avi@scylladb.com> Cc: Sandeep Dhavale <dhavale@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-21 03:45:35 +0300