| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a bunch of tiny char/misc/other driver fixes for 6.4-rc5 that
resolve a number of reported issues. Included in here are:
- iio driver fixes
- fpga driver fixes
- test_firmware bugfixes
- fastrpc driver tiny bugfixes
- MAINTAINERS file updates for some subsystems
All of these have been in linux-next this past week with no reported
issues"
* tag 'char-misc-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (34 commits)
test_firmware: fix the memory leak of the allocated firmware buffer
test_firmware: fix a memory leak with reqs buffer
test_firmware: prevent race conditions by a correct implementation of locking
firmware_loader: Fix a NULL vs IS_ERR() check
MAINTAINERS: Vaibhav Gupta is the new ipack maintainer
dt-bindings: fpga: replace Ivan Bornyakov maintainership
MAINTAINERS: update Microchip MPF FPGA reviewers
misc: fastrpc: reject new invocations during device removal
misc: fastrpc: return -EPIPE to invocations on device removal
misc: fastrpc: Reassign memory ownership only for remote heap
misc: fastrpc: Pass proper scm arguments for secure map request
iio: imu: inv_icm42600: fix timestamp reset
iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value
iio: dac: mcp4725: Fix i2c_master_send() return value handling
iio: accel: kx022a fix irq getting
iio: bu27034: Ensure reset is written
iio: dac: build ad5758 driver when AD5758 is selected
iio: addac: ad74413: fix resistance input processing
iio: light: vcnl4035: fixed chip ID check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver and core fixes for 6.4-rc5. Most of these are
tiny driver fixes, including:
- udc driver bugfix
- f_fs gadget driver bugfix
- cdns3 driver bugfix
- typec bugfixes
But the "big" thing in here is a fix yet-again for how the USB buffers
are handled from userspace when dealing with DMA issues. The changes
were discussed a lot, and tested a lot, on the list, and acked by the
relevant mm maintainers and have been in linux-next all this past week
with no reported problems"
* tag 'usb-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tps6598x: Fix broken polling mode after system suspend/resume
mm: page_table_check: Ensure user pages are not slab pages
mm: page_table_check: Make it dependent on EXCLUSIVE_SYSTEM_RAM
usb: usbfs: Use consistent mmap functions
usb: usbfs: Enforce page requirements for mmap
dt-bindings: usb: snps,dwc3: Fix "snps,hsphy_interface" type
usb: gadget: udc: fix NULL dereference in remove()
usb: gadget: f_fs: Add unbind event before functionfs_unbind
usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Two minor bug fixes
* tag 'nfsd-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix double fget() bug in __write_ports_addfd()
nfsd: make a copy of struct iattr before calling notify_change
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"A few minor fixes for EFI, one of which fixes the reported boot
regression when booting x86 kernels using the BIOS based loader built
into the hypervisor framework on macOS.
- fix harmless warning in zboot code on 'make clean'
- add some missing prototypes
- fix boot regressions triggered by PE/COFF header image minor
version bump"
* tag 'efi-fixes-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Bump stub image version for macOS HVF compatibility
efi: fix missing prototype warnings
efi/libstub: zboot: Avoid eager evaluation of objcopy flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Happy Wear a Dress Day.
Fairly standard-sized batch of fixes, accounting for the lack of
sub-tree submissions this week. The mlx5 IRQ fixes are notable, people
were complaining about that. No fires burning.
Current release - regressions:
- eth: mlx5e:
- multiple fixes for dynamic IRQ allocation
- prevent encap offload when neigh update is running
- eth: mana: fix perf regression: remove rx_cqes, tx_cqes counters
Current release - new code bugs:
- eth: mlx5e: DR, add missing mutex init/destroy in pattern manager
Previous releases - always broken:
- tcp: deny tcp_disconnect() when threads are waiting
- sched: prevent ingress Qdiscs from getting installed in random
locations in the hierarchy and moving around
- sched: flower: fix possible OOB write in fl_set_geneve_opt()
- netlink: fix NETLINK_LIST_MEMBERSHIPS length report
- udp6: fix race condition in udp6_sendmsg & connect
- tcp: fix mishandling when the sack compression is deferred
- rtnetlink: validate link attributes set at creation time
- mptcp: fix connect timeout handling
- eth: stmmac: fix call trace when stmmac_xdp_xmit() is invoked
- eth: amd-xgbe: fix the false linkup in xgbe_phy_status
- eth: mlx5e:
- fix corner cases in internal buffer configuration
- drain health before unregistering devlink
- usb: qmi_wwan: set DTR quirk for BroadMobi BM818
Misc:
- tcp: return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if
user_mss set"
* tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
mptcp: fix active subflow finalization
mptcp: add annotations around sk->sk_shutdown accesses
mptcp: fix data race around msk->first access
mptcp: consolidate passive msk socket initialization
mptcp: add annotations around msk->subflow accesses
mptcp: fix connect timeout handling
rtnetlink: add the missing IFLA_GRO_ tb check in validate_linkmsg
rtnetlink: move IFLA_GSO_ tb check to validate_linkmsg
rtnetlink: call validate_linkmsg in rtnl_create_link
ice: recycle/free all of the fragments from multi-buffer frame
net: phy: mxl-gpy: extend interrupt fix to all impacted variants
net: renesas: rswitch: Fix return value in error path of xmit
net: dsa: mv88e6xxx: Increase wait after reset deactivation
net: ipa: Use correct value for IPA_STATUS_SIZE
tcp: fix mishandling when the sack compression is deferred.
net/sched: flower: fix possible OOB write in fl_set_geneve_opt()
sfc: fix error unwinds in TC offload
net/mlx5: Read embedded cpu after init bit cleared
net/mlx5e: Fix error handling in mlx5e_refresh_tirs
net/mlx5: Ensure af_desc.mask is properly initialized
...
|
|
When switching from kthreads to vhost_tasks two bugs were added:
1. The vhost worker tasks's now show up as processes so scripts doing
ps or ps a would not incorrectly detect the vhost task as another
process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but
vhost tasks's didn't disable or add support for them.
To fix both bugs, this switches the vhost task to be thread in the
process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call
get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that
SIGKILL/STOP support is required because CLONE_THREAD requires
CLONE_SIGHAND which requires those 2 signals to be supported.
This is a modified version of the patch written by Mike Christie
<michael.christie@oracle.com> which was a modified version of patch
originally written by Linus.
Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER.
Including ignoring signals, setting up the register state, and having
get_signal return instead of calling do_group_exit.
Tidied up the vhost_task abstraction so that the definition of
vhost_task only needs to be visible inside of vhost_task.c. Making
it easier to review the code and tell what needs to be done where.
As part of this the main loop has been moved from vhost_worker into
vhost_task_fn. vhost_worker now returns true if work was done.
The main loop has been updated to call get_signal which handles
SIGSTOP, freezing, and collects the message that tells the thread to
exit as part of process exit. This collection clears
__fatal_signal_pending. This collection is not guaranteed to
clear signal_pending() so clear that explicitly so the schedule()
sleeps.
For now the vhost thread continues to exist and run work until the
last file descriptor is closed and the release function is called as
part of freeing struct file. To avoid hangs in the coredump
rendezvous and when killing threads in a multi-threaded exec. The
coredump code and de_thread have been modified to ignore vhost threads.
Remvoing the special case for exec appears to require teaching
vhost_dev_flush how to directly complete transactions in case
the vhost thread is no longer running.
Removing the special case for coredump rendezvous requires either the
above fix needed for exec or moving the coredump rendezvous into
get_signal.
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Co-developed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to use a flexible array rather than a zero-length one"
* tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: Replace zero-length array with flexible-array member
|
|
Zero-length and one-element arrays are deprecated, and we are moving
towards adopting C99 flexible-array members, instead.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
sound/firewire/amdtp-stream.c: In function ‘build_it_pkt_header’:
sound/firewire/amdtp-stream.c:694:17: warning: ‘generate_cip_header’ accessing 8 bytes in a region of size 0 [-Wstringop-overflow=]
694 | generate_cip_header(s, cip_header, data_block_counter, syt);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/firewire/amdtp-stream.c:694:17: note: referencing argument 2 of type ‘__be32[2]’ {aka ‘unsigned int[2]’}
sound/firewire/amdtp-stream.c:667:13: note: in a call to function ‘generate_cip_header’
667 | static void generate_cip_header(struct amdtp_stream *s, __be32 cip_header[2],
| ^~~~~~~~~~~~~~~~~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/303
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZHT0V3SpvHyxCv5W@work
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The bug here is that you cannot rely on getting the same socket
from multiple calls to fget() because userspace can influence
that. This is a kind of double fetch bug.
The fix is to delete the svc_alien_sock() function and instead do
the checking inside the svc_addsock() function.
Fixes: 3064639423c4 ("nfsd: check passed socket's net matches NFSd superblock's one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The current uses of PageAnon in page table check functions can lead to
type confusion bugs between struct page and slab [1], if slab pages are
accidentally mapped into the user space. This is because slab reuses the
bits in struct page to store its internal states, which renders PageAnon
ineffective on slab pages.
Since slab pages are not expected to be mapped into the user space, this
patch adds BUG_ON(PageSlab(page)) checks to make sure that slab pages
are not inadvertently mapped. Otherwise, there must be some bugs in the
kernel.
Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1]
Fixes: df4e817b7108 ("mm: page table check")
Cc: <stable@vger.kernel.org> # 5.17
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20230515130958.32471-5-lrh2000@pku.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current implementation of usbdev_mmap uses usb_alloc_coherent to
allocate memory pages that will later be mapped into the user space.
Meanwhile, usb_alloc_coherent employs three different methods to
allocate memory, as outlined below:
* If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to
allocate memory;
* If DMA is not available, it uses kmalloc to allocate memory;
* Otherwise, it uses dma_alloc_coherent.
However, it should be noted that gen_pool_dma_alloc does not guarantee
that the resulting memory will be page-aligned. Furthermore, trying to
map slab pages (i.e., memory allocated by kmalloc) into the user space
is not resonable and can lead to problems, such as a type confusion bug
when PAGE_TABLE_CHECK=y [1].
To address these issues, this patch introduces hcd_alloc_coherent_pages,
which addresses the above two problems. Specifically,
hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of
gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace
kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling
__get_free_pages.
Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm
Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1]
Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.")
Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations")
Cc: stable@vger.kernel.org
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"User events:
- Use long instead of int for storing the enable set/clear bit, as it
was found that big endian machines could end up using the wrong
bits.
- Split allocating mm and attaching it. This keeps the allocation
separate from the registration and avoids various races.
- Remove RCU locking around pin_user_pages_remote() as that can
schedule. The RCU protection is no longer needed with the above
split of mm allocation and attaching.
- Rename the "link" fields of the various structs to something more
meaningful.
- Add comments around user_event_mm struct usage and locking
requirements.
Timerlat tracer:
- Fix missed wakeup of timerlat thread caused by the timerlat
interrupt triggering when tracing is off. The timer interrupt
handler needs to always wake up the timerlat thread regardless if
tracing is enabled or not, otherwise, it will never wake up.
Histograms:
- Fix regression of breaking the "stacktrace" modifier for variables.
That modifier cannot be used for values, but can be used for
variables that are passed from one histogram to the next. This was
broken when adding the restriction to values as the variable logic
used the same code.
- Rename the special field "stacktrace" to "common_stacktrace".
Special fields (that are not actually part of the event, but can
act just like event fields, like 'comm' and 'timestamp') should be
prefixed with 'common_' for consistency. To keep backward
compatibility, 'stacktrace' can still be used (as with the special
field 'cpu'), but can be overridden if the event has a field called
'stacktrace'.
- Update the synthetic event selftests to use the new name (synthetic
events are created by histograms)
Tracing bootup selftests:
- Reorganize the code to keep artifacts of the selftests not compiled
in when selftests are not configured.
- Add various cond_resched() around the selftest code, as the
softlock watchdog was triggering much more often. It appears that
the kernel runs slower now with full debugging enabled.
- While debugging ftrace with ftrace (using an instance ring buffer
instead of the top level one), I found that the selftests were
disabling prints to the debug instance.
This should not happen, as the selftests only disable printing to
the main buffer as the selftests examine the main buffer to see if
it has what it expects, and prints can make the tests fail.
Make the selftests only disable printing to the toplevel buffer,
and leave the instance buffers alone"
* tag 'trace-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have function_graph selftest call cond_resched()
tracing: Only make selftest conditionals affect the global_trace
tracing: Make tracing_selftest_running/delete nops when not used
tracing: Have tracer selftests call cond_resched() before running
tracing: Move setting of tracing_selftest_running out of register_tracer()
tracing/selftests: Update synthetic event selftest to use common_stacktrace
tracing: Rename stacktrace field to common_stacktrace
tracing/histograms: Allow variables to have some modifiers
tracing/user_events: Document user_event_mm one-shot list usage
tracing/user_events: Rename link fields for clarity
tracing/user_events: Remove RCU lock while pinning pages
tracing/user_events: Split up mm alloc and attach
tracing/timerlat: Always wakeup the timerlat thread
tracing/user_events: Use long vs int for atomic bit ops
|
|
This reverts commit 9828ed3f695a138f7add89fa2a186ababceb8006.
Sadly, it does seem to cause failures to load modules. Johan Hovold reports:
"This change breaks module loading during boot on the Lenovo Thinkpad
X13s (aarch64).
Specifically it results in indefinite probe deferral of the display
and USB (ethernet) which makes it a pain to debug. Typing in the dark
to acquire some logs reveals that other modules are missing as well"
Since this was applied late as a "let's try this", I'm reverting it
asap, and we can try to figure out what goes wrong later. The excessive
parallel module loading problem is annoying, but not noticeable in
normal situations, and this was only meant as an optimistic workaround
for a user-space bug.
One possible solution may be to do the optimistic exclusive open first,
and then use a lock to serialize loading if that fails.
Reported-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/lkml/ZHRpH-JXAxA6DnzR@hovoldconsulting.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for the 6.4 cycle.
Usual mixed bag of issues in new code for this cycle and old issues
that have surfaced in the last few weeks.
- adi,ad_sigma_delta
* Ensure irq lazy disable handing is not used as it breaks completion
detection.
- adi,ad4130
* Fix failure to remove clock provider.
- adi,ad5758
* Wrong CONFIG variable used to control driver build.
- adi,ad7192
* Fix repeated channel index by just expressing shorted channels
as differential channel between a channel and itself.
- adi,ad74413
* Fix error handling for resistance input processing to not fail
in case of success.
- rohm,bu27034
* Fix integration time in wrong units (should be seconds not usecs)
* Ensure reset is actually written not detected as already set from
regcache.
- gts helper
* Fix wrong parameter docs.
* Fix integration time in wrong units (should be seconds not usecs)
- fsl,imx8qxp-adc
* Add missing vref-supply to binding doc (already used by driver)
- fsl,imx93
* Fix sign bug in read_raw() so that error check didn't work.
- inv,icm42600
* Fix reset of timestamp to work even if a particular sensor is off when
the chip is first enabled.
- kionix,kx022a
* Fix irq get form fw node to not include the 0 value.
- microchip,mcp4725
* Fix return value from i2c_master_send() handling to nto assume 0 on
success.
- mediatek,mt6370
* Fix incorrect scaling of a few currents on devices with particular
vendor IDs.
- fsl,mxs-lradc
* Cleanup ordering issue fix.
- renesas,rcar-adc bindings
* Fix missing vendor prefix for adi,ad7476
- st,st_accel
* Fix handling when no ACPI _ONT method present.
- st,stm32-adc
* Handle no adc-diff-channel present case (all single ended)
* Handle no adc-channels present case (all differential)
- ti,palmas
* Fix off by one bug that could allow out of bounds read if callers
provided wrong value.
- ti,tmag5273
* Fix a runtime PM leak on measurement error
- vishay,vcnl4035
* Correctly mask chip ID so devices with different addresses
don't fail the test.
* tag 'iio-fixes-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (23 commits)
iio: imu: inv_icm42600: fix timestamp reset
iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value
iio: dac: mcp4725: Fix i2c_master_send() return value handling
iio: accel: kx022a fix irq getting
iio: bu27034: Ensure reset is written
iio: dac: build ad5758 driver when AD5758 is selected
iio: addac: ad74413: fix resistance input processing
iio: light: vcnl4035: fixed chip ID check
dt-bindings: iio: imx8qxp-adc: add missing vref-supply
iio: adc: stm32-adc: skip adc-channels setup if none is present
iio: adc: stm32-adc: skip adc-diff-channels setup if none is present
iio: adc: ad7192: Change "shorted" channels to differential
iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT method
iio: gts-helpers: fix integration time units
iio: bu27034: Fix integration time
iio: fix doc for iio_gts_find_sel_by_int_time
iio: adc: palmas: fix off by one bugs
iio: adc: mxs-lradc: fix the order of two cleanup operations
iio: ad4130: Make sure clock provider gets removed
...
|
|
The macOS hypervisor framework includes a host-side VMM called
VZLinuxBootLoader [1] which implements native support for booting the
Linux kernel inside a guest directly (instead of, e.g., via GRUB
installed inside the guest). On x86, it incorporates a BIOS style loader
that does not implement or expose EFI to the loaded kernel. However,
this loader appears to fail when the 'image minor version' field in the
kernel image's PE/COFF header (which is generally only used by EFI based
bootloaders) is set to any value other than 0x0. [2]
Commit e346bebbd36b1576 ("efi: libstub: Always enable initrd command
line loader and bump version") incremented the EFI stub image minor
version to convey that all EFI stub kernels now implement support for
the initrd= command line option, and do so in a way where it can load
initrd images from any filesystem known to the EFI firmware (as opposed
to prior implementations that could only load initrds from the same
volume that the kernel image was loaded from).
Unfortunately, bumping the version to v1.1 triggers this issue in
VZLinuxBootLoader, breaking the boot on x86. So let's keep the image
minor version at 0x0, and bump the image major version instead.
While at it, convert this field to a bit field, so that individual
features are discoverable from it, as suggested by Linus. So let's bump
the major version to v3, and document the initrd= command line loading
feature as being represented by bit 1 in the mask.
Note that, due to the prior interpretation as a monotonically increasing
version field, loaders are still permitted to assume that the LoadFile2
initrd loading feature is supported for any major version value >= 1,
even if bit 0 is not set.
[1] https://developer.apple.com/documentation/virtualization/vzlinuxbootloader
[2] https://lore.kernel.org/linux-efi/CAG8fp8Teu4G9JuenQrqGndFt2Gy+V4YgJ=hN1xX7AD940YKf3A@mail.gmail.com/
Fixes: e346bebbd36b1576 ("efi: libstub: Always enable initrd command ...")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217485
Signed-off-by: Akihiro Suda <suda.kyoto@gmail.com>
[ardb: rewrite comment and commit log]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fixes from Thomas Gleixner:
"Two fixes for debugobjects:
- Prevent the allocation path from waking up kswapd.
That's a long standing issue due to the GFP_ATOMIC allocation flag.
As debug objects can be invoked from pretty much any context waking
kswapd can end up in arbitrary lock chains versus the waitqueue
lock
- Correct the explicit lockdep wait-type violation in
debug_object_fill_pool()"
* tag 'core-debugobjects-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Don't wake up kswapd from fill_pool()
debugobjects,locking: Annotate debug_object_fill_pool() wait type violation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a double free fix in the Xen pvcalls backend driver
- a fix for a regression causing the MSI related sysfs entries to not
being created in Xen PV guests
- a fix in the Xen blkfront driver for handling insane input data
better
* tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/pci/xen: populate MSI sysfs entries
xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()
xen/blkfront: Only check REQ_FUA for writes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There have not been a lot of fixes for for the soc tree in 6.4, but
these have been sitting here for too long.
For the devicetree side, there is one minor warning fix for vexpress,
the rest all all for the the NXP i.MX platforms: SoC specific bugfixes
for the iMX8 clocks and its USB-3.0 gadget device, as well as board
specific fixes for regulators and the phy on some of the i.MX boards.
The microchip risc-v and arm32 maintainers now also add a shared
maintainer file entry for the arm64 parts.
The remaining fixes are all for firmware drivers, addressing mistakes
in the optee, scmi and ff-a firmware driver implementation, mostly in
the error handling code, incorrect use of the alloc_workqueue()
interface in SCMI, and compatibility with corner cases of the firmware
implementation"
* tag 'arm-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update arm64 Microchip entries
arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
arm64: dts: colibri-imx8x: delete adc1 and dsp
arm64: dts: colibri-imx8x: fix iris pinctrl configuration
arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board
arm64: dts: colibri-imx8x: fix eval board pin configuration
arm64: dts: imx8mp: Fix video clock parents
ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator
ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
arm64: dts: imx8mn: Fix video clock parents
firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors
firmware: arm_ffa: Fix FFA device names for logical partitions
firmware: arm_ffa: Fix usage of partition info get count flag
firmware: arm_ffa: Check if ffa_driver remove is present before executing
arm64: dts: arm: add missing cache properties
ARM: dts: vexpress: add missing cache properties
firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation
optee: fix uninited async notif value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.4
Quite a few fixes to address set of assorted issues:
1. NULL pointer dereference if the ffa driver doesn't provide remove()
callback as it is currently executed unconditionally
2. FF-A core probe failure on systems with v1.0 firmware as the new
partition info get count flag is used unconditionally
3. Failure to register more than one logical partition or service within
the same physical partition as the device name contains only VM ID
which will be same for all but each will have unique UUID.
4. Rejection of certain memory interface transmissions by the receivers
(secure partitions) as few MBZ fields are non-zero due to lack of
explicit re-initialization of those fields
* tag 'ffa-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors
firmware: arm_ffa: Fix FFA device names for logical partitions
firmware: arm_ffa: Fix usage of partition info get count flag
firmware: arm_ffa: Check if ffa_driver remove is present before executing
Link: https://lore.kernel.org/r/20230509143453.1188753-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-05-24
This series includes bug fixes for the mlx5 driver.
* tag 'mlx5-fixes-2023-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
Documentation: net/mlx5: Wrap notes in admonition blocks
Documentation: net/mlx5: Add blank line separator before numbered lists
Documentation: net/mlx5: Use bullet and definition lists for vnic counters description
Documentation: net/mlx5: Wrap vnic reporter devlink commands in code blocks
net/mlx5: Fix check for allocation failure in comp_irqs_request_pci()
net/mlx5: DR, Add missing mutex init/destroy in pattern manager
net/mlx5e: Move Ethernet driver debugfs to profile init callback
net/mlx5e: Don't attach netdev profile while handling internal error
net/mlx5: Fix post parse infra to only parse every action once
net/mlx5e: Use query_special_contexts cmd only once per mdev
net/mlx5: fw_tracer, Fix event handling
net/mlx5: SF, Drain health before removing device
net/mlx5: Drain health before unregistering devlink
net/mlx5e: Do not update SBCM when prio2buffer command is invalid
net/mlx5e: Consider internal buffers size in port buffer calculations
net/mlx5e: Prevent encap offload when neigh update is running
net/mlx5e: Extract remaining tunnel encap code to dedicated file
====================
Link: https://lore.kernel.org/r/20230525034847.99268-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It turns out that udev under certain circumstances will concurrently try
to load the same modules over-and-over excessively. This isn't a kernel
bug, but it ends up affecting the kernel, to the point that under
certain circumstances we can fail to boot, because the kernel uses a lot
of memory to read all the module data all at once.
Note that it isn't a memory leak, it's just basically a thundering herd
problem happening at bootup with a lot of CPUs, with the worst cases
then being pretty bad.
Admittedly the worst situations are somewhat contrived: lots and lots of
CPUs, not a lot of memory, and KASAN enabled to make it all slower and
as such (unintentionally) exacerbate the problem.
Luis explains: [1]
"My best assessment of the situation is that each CPU in udev ends up
triggering a load of duplicate set of modules, not just one, but *a
lot*. Not sure what heuristics udev uses to load a set of modules per
CPU."
Petr Pavlu chimes in: [2]
"My understanding is that udev workers are forked. An initial kmod
context is created by the main udevd process but no sharing happens
after the fork. It means that the mentioned memory pool logic doesn't
really kick in.
Multiple parallel load requests come from multiple udev workers, for
instance, each handling an udev event for one CPU device and making
the exactly same requests as all others are doing at the same time.
The optimization idea would be to recognize these duplicate requests
at the udevd/kmod level and converge them"
Note that module loading has tried to mitigate this issue before, see
for example commit 064f4536d139 ("module: avoid allocation if module is
already present and ready"), which has a few ASCII graphs on memory use
due to this same issue.
However, while that noticed that the module was already loaded, and
exited with an error early before spending any more time on setting up
the module, it didn't handle the case of multiple concurrent module
loads all being active - but not complete - at the same time.
Yes, one of them will eventually win the race and finalize its copy, and
the others will then notice that the module already exists and error
out, but while this all happens, we have tons of unnecessary concurrent
work being done.
Again, the real fix is for udev to not do that (maybe it should use
threads instead of fork, and have actual shared data structures and not
cause duplicate work). That real fix is apparently not trivial.
But it turns out that the kernel already has a pretty good model for
dealing with concurrent access to the same file: the i_writecount of the
inode.
In fact, the module loading already indirectly uses 'i_writecount' ,
because 'kernel_file_read()' will in fact do
ret = deny_write_access(file);
if (ret)
return ret;
...
allow_write_access(file);
around the read of the file data. We do not allow concurrent writes to
the file, and return -ETXTBUSY if the file was open for writing at the
same time as the module data is loaded from it.
And the solution to the reader concurrency problem is to simply extend
this "no concurrent writers" logic to simply be "exclusive access".
Note that "exclusive" in this context isn't really some absolute thing:
it's only exclusion from writers and from other "special readers" that
do this writer denial. So we simply introduce a variation of that
"deny_write_access()" logic that not only denies write access, but also
requires that this is the _only_ such access that denies write access.
Which means that you can't start loading a module that is already being
loaded as a module by somebody else, or you will get the same -ETXTBSY
error that you would get if there were writers around.
[ It also means that you can't try to load a currently executing
executable as a module, for the same reason: executables do that same
"deny_write_access()" thing, and that's obviously where the whole
ETXTBSY logic traditionally came from.
This is not a problem for kernel modules, since the set of normal
executable files and kernel module files is entirely disjoint. ]
This new function is called "exclusive_deny_write_access()", and the
implementation is trivial, in that it's just an atomic decrement of
i_writecount if it was 0 before.
To use that new exclusivity check, all we then do is wrap the module
loading with that exclusive_deny_write_access()() / allow_write_access()
pair. The actual patch is a bit bigger than that, because we want to
surround not just the "load file data" part, but the whole module setup,
to get maximum exclusion.
So this ends up splitting up "finit_module()" into a few helper
functions to make it all very clear and legible.
In Luis' test-case (bringing up 255 vcpu's in a virtual machine [3]),
the "wasted vmalloc" space (ie module data read into a vmalloc'ed area
in order to be loaded as a module, but then discarded because somebody
else loaded the same module instead) dropped from 1.8GiB to 474kB. Yes,
that's gigabytes to kilobytes.
It doesn't drop completely to zero, because even with this change, you
can still end up having completely serial pointless module loads, where
one udev process has loaded a module fully (and thus the kernel has
released that exclusive lock on the module file), and then another udev
process tries to load the same module again.
So while we cannot fully get rid of the fundamental bug in user space,
we _can_ get rid of the excessive concurrent thundering herd effect.
A couple of final side notes on this all:
- This tweak only affects the "finit_module()" system call, which gives
the kernel a file descriptor with the module data.
You can also just feed the module data as raw data from user space
with "init_module()" (note the lack of 'f' at the beginning), and
obviously for that case we do _not_ have any "exclusive read" logic.
So if you absolutely want to do things wrong in user space, and try
to load the same module multiple times, and error out only later when
the kernel ends up saying "you can't load the same module name
twice", you can still do that.
And in fact, some distros will do exactly that, because they will
uncompress the kernel module data in user space before feeding it to
the kernel (mainly because they haven't started using the new kernel
side decompression yet).
So this is not some absolute "you can't do concurrent loads of the
same module". It's literally just a very simple heuristic that will
catch it early in case you try to load the exact same module file at
the same time, and in that case avoid a potentially nasty situation.
- There is another user of "deny_write_access()": the verity code that
enables fs-verity on a file (the FS_IOC_ENABLE_VERITY ioctl).
If you use fs-verity and you care about verifying the kernel modules
(which does make sense), you should do it *before* loading said
kernel module. That may sound obvious, but now the implementation
basically requires it. Because if you try to do it concurrently, the
kernel may refuse to load the module file that is being set up by the
fs-verity code.
- This all will obviously mean that if you insist on loading the same
module in parallel, only one module load will succeed, and the others
will return with an error.
That was true before too, but what is different is that the -ETXTBSY
error can be returned *before* the success case of another process
fully loading and instantiating the module.
Again, that might sound obvious, and it is indeed the whole point of
the whole change: we are much quicker to notice the whole "you're
already in the process of loading this module".
So it's very much intentional, but it does mean that if you just
spray the kernel with "finit_module()", and expect that the module is
immediately loaded afterwards without checking the return value, you
are doing something horribly horribly wrong.
I'd like to say that that would never happen, but the whole _reason_
for this commit is that udev is currently doing something horribly
horribly wrong, so ...
Link: https://lore.kernel.org/all/ZEGopJ8VAYnE7LQ2@bombadil.infradead.org/ [1]
Link: https://lore.kernel.org/all/23bd0ce6-ef78-1cd8-1f21-0e706a00424a@suse.com/ [2]
Link: https://lore.kernel.org/lkml/ZG%2Fa+nrt4%2FAAUi5z@bombadil.infradead.org/ [3]
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- During the acl rework we merged this cycle the generic_listxattr()
helper had to be modified in a way that in principle it would allow
for POSIX ACLs to be reported. At least that was the impression we
had initially. Because before the acl rework POSIX ACLs would be
reported if the filesystem did have POSIX ACL xattr handlers in
sb->s_xattr. That logic changed and now we can simply check whether
the superblock has SB_POSIXACL set and if the inode has
inode->i_{default_}acl set report the appropriate POSIX ACL name.
However, we didn't realize that generic_listxattr() was only ever
used by two filesystems. Both of them don't support POSIX ACLs via
sb->s_xattr handlers and so never reported POSIX ACLs via
generic_listxattr() even if they raised SB_POSIXACL and did contain
inodes which had acls set. The example here is nfs4.
As a result, generic_listxattr() suddenly started reporting POSIX
ACLs when it wouldn't have before. Since SB_POSIXACL implies that the
umask isn't stripped in the VFS nfs4 can't just drop SB_POSIXACL from
the superblock as it would also alter umask handling for them.
So just have generic_listxattr() not report POSIX ACLs as it never
did anyway. It's documented as such.
- Our SB_* flags currently use a signed integer and we shift the last
bit causing UBSAN to complain about undefined behavior. Switch to
using unsigned. While the original patch used an explicit unsigned
bitshift it's now pretty common to rely on the BIT() macro in a lot
of headers nowadays. So the patch has been adjusted to use that.
- Add Namjae as ntfs reviewer. They're already active this cycle so
let's make it explicit right now.
* tag 'vfs/v6.4-rc3/misc.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ntfs: Add myself as a reviewer
fs: don't call posix_acl_listxattr in generic_listxattr
fs: fix undefined behavior in bit shift for SB_NOUSER
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and bpf.
Current release - regressions:
- net: fix skb leak in __skb_tstamp_tx()
- eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
Current release - new code bugs:
- handshake:
- fix sock->file allocation
- fix handshake_dup() ref counting
- bluetooth:
- fix potential double free caused by hci_conn_unlink
- fix UAF in hci_conn_hash_flush
Previous releases - regressions:
- core: fix stack overflow when LRO is disabled for virtual
interfaces
- tls: fix strparser rx issues
- bpf:
- fix many sockmap/TCP related issues
- fix a memory leak in the LRU and LRU_PERCPU hash maps
- init the offload table earlier
- eth: mlx5e:
- do as little as possible in napi poll when budget is 0
- fix using eswitch mapping in nic mode
- fix deadlock in tc route query code
Previous releases - always broken:
- udplite: fix NULL pointer dereference in __sk_mem_raise_allocated()
- raw: fix output xfrm lookup wrt protocol
- smc: reset connection when trying to use SMCRv2 fails
- phy: mscc: enable VSC8501/2 RGMII RX clock
- eth: octeontx2-pf: fix TSOv6 offload
- eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize"
* tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
net: phy: mscc: enable VSC8501/2 RGMII RX clock
net: phy: mscc: remove unnecessary phydev locking
net: phy: mscc: add support for VSC8501
net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE
net/handshake: Enable the SNI extension to work properly
net/handshake: Unpin sock->file if a handshake is cancelled
net/handshake: handshake_genl_notify() shouldn't ignore @flags
net/handshake: Fix uninitialized local variable
net/handshake: Fix handshake_dup() ref counting
net/handshake: Remove unneeded check from handshake_dup()
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
docs: netdev: document the existence of the mail bot
net: fix skb leak in __skb_tstamp_tx()
r8169: Use a raw_spinlock_t for the register locks.
page_pool: fix inconsistency for page_pool_ring_[un]lock()
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- Fix power_supply_get_battery_info for devices without parent devices
resulting in NULL pointer dereference
- Fix desktop systems reporting to run on battery once a power-supply
device with device scope appears (e.g. a HID keyboard with a battery)
- Ratelimit debug print about driver not providing data
- Fix race condition related to external_power_changed in multiple
drivers (ab8500, axp288, bq25890, sc27xx, bq27xxx)
- Fix LED trigger switching from blinking to solid-on when charging
finishes
- Fix multiple races in bq27xxx battery driver
- mt6360: handle potential ENOMEM from devm_work_autocancel
- sbs-charger: Fix SBS_CHARGER_STATUS_CHARGE_INHIBITED bit
- rt9467: avoid passing 0 to dev_err_probe
* tag 'for-v6.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (21 commits)
power: supply: Fix logic checking if system is running from battery
power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe
power: supply: sbs-charger: Fix INHIBITED bit for Status reg
power: supply: rt9467: Fix passing zero to 'dev_err_probe'
power: supply: Ratelimit no data debug output
power: supply: Fix power_supply_get_battery_info() if parent is NULL
power: supply: bq24190: Call power_supply_changed() after updating input current
power: supply: bq25890: Call power_supply_changed() after updating input current or voltage
power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()
power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize
power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes
power: supply: bq27xxx: Move bq27xxx_battery_update() down
power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()
power: supply: bq27xxx: Fix poll_interval handling and races on remove
power: supply: bq27xxx: Fix I2C IRQ race on remove
power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition
power: supply: leds: Fix blink to LED on transition
power: supply: sc27xx: Fix external_power_changed race
power: supply: bq25890: Fix external_power_changed race
power: supply: axp288_fuel_gauge: Fix external_power_changed race
...
|
|
The cper.c file needs to include an extra header, and efi_zboot_entry
needs an extern declaration to avoid these 'make W=1' warnings:
drivers/firmware/efi/libstub/zboot.c:65:1: error: no previous prototype for 'efi_zboot_entry' [-Werror=missing-prototypes]
drivers/firmware/efi/efi.c:176:16: error: no previous prototype for 'efi_attr_is_visible' [-Werror=missing-prototypes]
drivers/firmware/efi/cper.c:626:6: error: no previous prototype for 'cper_estatus_print' [-Werror=missing-prototypes]
drivers/firmware/efi/cper.c:649:5: error: no previous prototype for 'cper_estatus_check_header' [-Werror=missing-prototypes]
drivers/firmware/efi/cper.c:662:5: error: no previous prototype for 'cper_estatus_check' [-Werror=missing-prototypes]
To make this easier, move the cper specific declarations to
include/linux/cper.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-05-24
We've added 19 non-merge commits during the last 10 day(s) which contain
a total of 20 files changed, 738 insertions(+), 448 deletions(-).
The main changes are:
1) Batch of BPF sockmap fixes found when running against NGINX TCP tests,
from John Fastabend.
2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails,
from Anton Protopopov.
3) Init the BPF offload table earlier than just late_initcall,
from Jakub Kicinski.
4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields,
from Will Deacon.
5) Remove a now unsupported __fallthrough in BPF samples,
from Andrii Nakryiko.
6) Fix a typo in pkg-config call for building sign-file,
from Jeremy Sowden.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0
bpf, sockmap: Build helper to create connected socket pair
bpf, sockmap: Pull socket helpers out of listen test for general use
bpf, sockmap: Incorrectly handling copied_seq
bpf, sockmap: Wake up polling after data copy
bpf, sockmap: TCP data stall on recv before accept
bpf, sockmap: Handle fin correctly
bpf, sockmap: Improved check for empty queue
bpf, sockmap: Reschedule is now done through backlog
bpf, sockmap: Convert schedule_work into delayed_work
bpf, sockmap: Pass skb ownership through read_skb
bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
samples/bpf: Drop unnecessary fallthrough
bpf: netdev: init the offload table earlier
selftests/bpf: Fix pkg-config call building sign-file
====================
Link: https://lore.kernel.org/r/20230524170839.13905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't query the firmware so many times (num rqs * num wqes * wqe frags)
because it slows down linearly the interface creation time when the
product is larger. Do it only once per mdev and store the result in
mlx5e_param.
Due to helper function being called from different files, move it to
an appropriate location. Rename the function with a proper prefix and
add a small cleanup.
This fix applies only for legacy rq.
Fixes: 1b1e4868836a ("net/mlx5e: Use query_special_contexts for mkeys")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Commit bf5e758f02fc ("genirq/msi: Simplify sysfs handling") reworked the
creation of sysfs entries for MSI IRQs. The creation used to be in
msi_domain_alloc_irqs_descs_locked after calling ops->domain_alloc_irqs.
Then it moved into __msi_domain_alloc_irqs which is an implementation of
domain_alloc_irqs. However, Xen comes with the only other implementation
of domain_alloc_irqs and hence doesn't run the sysfs population code
anymore.
Commit 6c796996ee70 ("x86/pci/xen: Fixup fallout from the PCI/MSI
overhaul") set the flag MSI_FLAG_DEV_SYSFS for the xen msi_domain_info
but that doesn't actually have an effect because Xen uses it's own
domain_alloc_irqs implementation.
Fix this by making use of the fallback functions for sysfs population.
Fixes: bf5e758f02fc ("genirq/msi: Simplify sysfs handling")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230503131656.15928-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The histogram and synthetic events can use a pseudo event called
"stacktrace" that will create a stacktrace at the time of the event and
use it just like it was a normal field. We have other pseudo events such
as "common_cpu" and "common_timestamp". To stay consistent with that,
convert "stacktrace" to "common_stacktrace". As this was used in older
kernels, to keep backward compatibility, this will act just like
"common_cpu" did with "cpu". That is, "cpu" will be the same as
"common_cpu" unless the event has a "cpu" field. In which case, the
event's field is used. The same is true with "stacktrace".
Also update the documentation to reflect this change.
Link: https://lore.kernel.org/linux-trace-kernel/20230523230913.6860e28d@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
During 6.4 development it became clear that the one-shot list used by
the user_event_mm's next field was confusing to others. It is not clear
how this list is protected or what the next field usage is for unless
you are familiar with the code.
Add comments into the user_event_mm struct indicating lock requirement
and usage. Also document how and why this approach was used via comments
in both user_event_enabler_update() and user_event_mm_get_all() and the
rules to properly use it.
Link: https://lkml.kernel.org/r/20230519230741.669-5-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/CAHk-=wicngggxVpbnrYHjRTwGE0WYscPRM+L2HO2BF8ia1EXgQ@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently most list_head fields of various structs within user_events
are simply named link. This causes folks to keep additional context in
their head when working with the code, which can be confusing.
Instead of using link, describe what the actual link is, for example:
list_del_rcu(&mm->link);
Changes into:
list_del_rcu(&mm->mms_link);
The reader now is given a hint the link is to the mms global list
instead of having to remember or spot check within the code.
Link: https://lkml.kernel.org/r/20230519230741.669-4-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/CAHk-=wicngggxVpbnrYHjRTwGE0WYscPRM+L2HO2BF8ia1EXgQ@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
We noticed some rare sk_buffs were stepping past the queue when system was
under memory pressure. The general theory is to skip enqueueing
sk_buffs when its not necessary which is the normal case with a system
that is properly provisioned for the task, no memory pressure and enough
cpu assigned.
But, if we can't allocate memory due to an ENOMEM error when enqueueing
the sk_buff into the sockmap receive queue we push it onto a delayed
workqueue to retry later. When a new sk_buff is received we then check
if that queue is empty. However, there is a problem with simply checking
the queue length. When a sk_buff is being processed from the ingress queue
but not yet on the sockmap msg receive queue its possible to also recv
a sk_buff through normal path. It will check the ingress queue which is
zero and then skip ahead of the pkt being processed.
Previously we used sock lock from both contexts which made the problem
harder to hit, but not impossible.
To fix instead of popping the skb from the queue entirely we peek the
skb from the queue and do the copy there. This ensures checks to the
queue length are non-zero while skb is being processed. Then finally
when the entire skb has been copied to user space queue or another
socket we pop it off the queue. This way the queue length check allows
bypassing the queue only after the list has been completely processed.
To reproduce issue we run NGINX compliance test with sockmap running and
observe some flakes in our testing that we attributed to this issue.
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: William Findlay <will@isovalent.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-5-john.fastabend@gmail.com
|
|
Sk_buffs are fed into sockmap verdict programs either from a strparser
(when the user might want to decide how framing of skb is done by attaching
another parser program) or directly through tcp_read_sock. The
tcp_read_sock is the preferred method for performance when the BPF logic is
a stream parser.
The flow for Cilium's common use case with a stream parser is,
tcp_read_sock()
sk_psock_verdict_recv
ret = bpf_prog_run_pin_on_cpu()
sk_psock_verdict_apply(sock, skb, ret)
// if system is under memory pressure or app is slow we may
// need to queue skb. Do this queuing through ingress_skb and
// then kick timer to wake up handler
skb_queue_tail(ingress_skb, skb)
schedule_work(work);
The work queue is wired up to sk_psock_backlog(). This will then walk the
ingress_skb skb list that holds our sk_buffs that could not be handled,
but should be OK to run at some later point. However, its possible that
the workqueue doing this work still hits an error when sending the skb.
When this happens the skbuff is requeued on a temporary 'state' struct
kept with the workqueue. This is necessary because its possible to
partially send an skbuff before hitting an error and we need to know how
and where to restart when the workqueue runs next.
Now for the trouble, we don't rekick the workqueue. This can cause a
stall where the skbuff we just cached on the state variable might never
be sent. This happens when its the last packet in a flow and no further
packets come along that would cause the system to kick the workqueue from
that side.
To fix we could do simple schedule_work(), but while under memory pressure
it makes sense to back off some instead of continue to retry repeatedly. So
instead to fix convert schedule_work to schedule_delayed_work and add
backoff logic to reschedule from backlog queue on errors. Its not obvious
though what a good backoff is so use '1'.
To test we observed some flakes whil running NGINX compliance test with
sockmap we attributed these failed test to this bug and subsequent issue.
>From on list discussion. This commit
bec217197b41("skmsg: Schedule psock work if the cached skb exists on the psock")
was intended to address similar race, but had a couple cases it missed.
Most obvious it only accounted for receiving traffic on the local socket
so if redirecting into another socket we could still get an sk_buff stuck
here. Next it missed the case where copied=0 in the recv() handler and
then we wouldn't kick the scheduler. Also its sub-optimal to require
userspace to kick the internal mechanisms of sockmap to wake it up and
copy data to user. It results in an extra syscall and requires the app
to actual handle the EAGAIN correctly.
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: William Findlay <will@isovalent.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-3-john.fastabend@gmail.com
|
|
SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB
(loopback), and FL (force-loopback) QP is preferred for performance. FL is
available when RoCE is enabled or disabled based on RoCE caps.
This patch adds reading of FL capability from HCA caps in addition to the
existing reading from RoCE caps, thus fixing the case where we didn't
have loopback enabled when RoCE was disabled.
Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB fixes for 6.4-rc3, as well as a driver core fix that
resolves a memory leak that shows up in USB devices easier than other
subsystems.
Included in here are:
- driver core memory leak as reported and tested by syzbot and
developers
- dwc3 driver fixes for reported problems
- xhci driver fixes for reported problems
- USB gadget driver reverts to resolve regressions
- usbtmc driver fix for syzbot reported problem
- thunderbolt driver fixes for reported issues
- other small USB fixes
All of these, except for the driver core fix, have been in linux-next
with no reported problems. The driver core fix was tested and verified
to solve the issue by syzbot and the original reporter"
* tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
driver core: class: properly reference count class_dev_iter()
xhci: Fix incorrect tracking of free space on transfer rings
xhci-pci: Only run d3cold avoidance quirk for s2idle
usb-storage: fix deadlock when a scsi command timeouts more than once
usb: dwc3: fix a test for error in dwc3_core_init()
usb: typec: tps6598x: Fix fault at module removal
usb: gadget: u_ether: Fix host MAC address case
usb: typec: altmodes/displayport: fix pin_assignment_show
Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started"
Revert "usb: gadget: udc: core: Prevent redundant calls to pullup"
usb: gadget: drop superfluous ':' in doc string
usb: dwc3: debugfs: Resume dwc3 before accessing registers
USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value
usb: dwc3: fix gadget mode suspend interrupt handler issue
usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()
USB: usbtmc: Fix direction for 0-length ioctl control messages
thunderbolt: Clear registers properly when auto clear isn't in use
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- More device quirks (Sagi, Hristo, Adrian, Daniel)
- Controller delete race (Maurizo)
- Multipath cleanup fix (Christoph)
- Deny writeable mmap mapping on a readonly block device (Loic)
- Kill unused define that got introduced by accident (Christoph)
- Error handling fix for s390 dasd (Stefan)
- ublk locking fix (Ming)
* tag 'block-6.4-2023-05-20' of git://git.kernel.dk/linux:
block: remove NFL4_UFLG_MASK
block: Deny writable memory mapping if block is read-only
s390/dasd: fix command reject error on ESE devices
nvme-pci: Add quirk for Teamgroup MP33 SSD
ublk: fix AB-BA lockdep warning
nvme: do not let the user delete a ctrl before a complete initialization
nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk
nvme-pci: clamp max_hw_sectors based on DMA optimized limitation
nvme-pci: add quirk for missing secondary temperature thresholds
nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G
|
|
The NFL4_UFLG_MASK define slipped in in commit 9208d4149758
("block: add a ->get_unique_id method") and should never have been
added, as NFSD as the only user of it already has it's copy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230520090010.527046-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.
team0
|
+------+------+-----+-----+
| | | | |
team1 team2 team3 ... team200
If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.
But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.
Reproducer:
ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
ip link add team$i master team0 type team
ethtool -K team$i lro on
done
ethtool -K team0 lro off
In order to fix it, the notifier_ctx member of bonding/team is introduced.
Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When class_dev_iter is initialized, the reference count for the subsys
private structure is incremented, but never decremented, causing a
memory leak over time. To resolve this, save off a pointer to the
internal structure into the class_dev_iter structure and then when the
iterator is finished, drop the reference count.
Reported-and-tested-by: syzbot+e7afd76ad060fa0d2605@syzkaller.appspotmail.com
Fixes: 7b884b7f24b4 ("driver core: class.c: convert to only use class_to_subsys")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/2023051610-stove-condense-9a77@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If a record is partially decrypted we'll have to CoW it, anyway,
so go into copy mode and allocate a writable skb right away.
This will make subsequent fix simpler because we won't have to
teach tls_strp_msg_make_copy() how to copy skbs while preserving
decrypt status.
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Eight hotfixes. Four are cc:stable, the other four are for post-6.4
issues, or aren't considered suitable for backporting"
* tag 'mm-hotfixes-stable-2023-05-18-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: Cleanup Arm Display IP maintainers
MAINTAINERS: repair pattern in DIALOG SEMICONDUCTOR DRIVERS
nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()
mm: fix zswap writeback race condition
mm: kfence: fix false positives on big endian
zsmalloc: move LRU update from zs_map_object() to zs_malloc()
mm: shrinkers: fix race condition on debugfs cleanup
maple_tree: make maple state reusable after mas_empty_area()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm, bluetooth and netfilter.
Current release - regressions:
- ipv6: fix RCU splat in ipv6_route_seq_show()
- wifi: iwlwifi: disable RFI feature
Previous releases - regressions:
- tcp: fix possible sk_priority leak in tcp_v4_send_reset()
- tipc: do not update mtu if msg_max is too small in mtu negotiation
- netfilter: fix null deref on element insertion
- devlink: change per-devlink netdev notifier to static one
- phylink: fix ksettings_set() ethtool call
- wifi: mac80211: fortify the spinlock against deadlock by interrupt
- wifi: brcmfmac: check for probe() id argument being NULL
- eth: ice:
- fix undersized tx_flags variable
- fix ice VF reset during iavf initialization
- eth: hns3: fix sending pfc frames after reset issue
Previous releases - always broken:
- xfrm: release all offloaded policy memory
- nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment()
- vsock: avoid to close connected socket after the timeout
- dsa: rzn1-a5psw: enable management frames for CPU port
- eth: virtio_net: fix error unwinding of XDP initialization
- eth: tun: fix memory leak for detached NAPI queue.
Misc:
- MAINTAINERS: sctp: move Neil to CREDITS"
* tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
MAINTAINERS: skip CCing netdev for Bluetooth patches
mdio_bus: unhide mdio_bus_init prototype
bridge: always declare tunnel functions
atm: hide unused procfs functions
net: isa: include net/Space.h
Revert "ARM: dts: stm32: add CAN support on stm32f746"
netfilter: nft_set_rbtree: fix null deref on element insertion
netfilter: nf_tables: fix nft_trans type confusion
netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
net: wwan: t7xx: Ensure init is completed before system sleep
net: selftests: Fix optstring
net: pcs: xpcs: fix C73 AN not getting enabled
net: wwan: iosm: fix NULL pointer dereference when removing device
vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
mailmap: add entries for Nikolay Aleksandrov
igb: fix bit_shift to be in [1..8] range
net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset
cassini: Fix a memory leak in the error handling path of cas_init_one()
tun: Fix memory leak for detached NAPI queue.
can: kvaser_pciefd: Disable interrupts in probe error path
...
|
|
mdio_bus_init() is either used as a local module_init() entry,
or it gets called in phy_device.c. In the former case, there
is no declaration, which causes a warning:
drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 'mdio_bus_init' [-Werror=missing-prototypes]
Remove the #ifdef around the declaration to avoid the warning..
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-4-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When something registers and unregisters many shrinkers, such as:
for x in $(seq 10000); do unshare -Ui true; done
Sometimes the following error is printed to the kernel log:
debugfs: Directory '...' with parent 'shrinker' already present!
This occurs since commit badc28d4924b ("mm: shrinkers: fix deadlock in
shrinker debugfs") / v6.2: Since the call to `debugfs_remove_recursive`
was moved outside the `shrinker_rwsem`/`shrinker_mutex` lock, but the call
to `ida_free` stayed inside, a newly registered shrinker can be
re-assigned that ID and attempt to create the debugfs directory before the
directory from the previous shrinker has been removed.
The locking changes in commit f95bdb700bc6 ("mm: vmscan: make global slab
shrink lockless") made the race condition more likely, though it existed
before then.
Commit badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs")
could be reverted since the issue is addressed should no longer occur
since the count and scan operations are lockless since commit 20cd1892fcc3
("mm: shrinkers: make count and scan in shrinker debugfs lockless").
However, since this is a contended lock, prefer instead moving `ida_free`
outside the lock to avoid the race.
Link: https://lkml.kernel.org/r/20230503013232.299211-1-joanbrugueram@gmail.com
Fixes: badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs")
Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- A collection of minor bug fixes
* tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Remove open coding of string copy
SUNRPC: Fix trace_svc_register() call site
SUNRPC: always free ctxt when freeing deferred request
SUNRPC: double free xprt_ctxt while still in use
SUNRPC: Fix error handling in svc_setup_socket()
SUNRPC: Fix encoding of accepted but unsuccessful RPC replies
lockd: define nlm_port_min,max with CONFIG_SYSCTL
nfsd: define exports_proc_ops with CONFIG_PROC_FS
SUNRPC: Avoid relying on crypto API to derive CBC-CTS output IV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Three bug fixes for recently discovered issues"
* tag 'tpmdd-v6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm/tpm_tis: Disable interrupts for more Lenovo devices
tpm: Prevent hwrng from activating during resume
tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resume
|
|
This function is only used when CONFIG_TRACE_BRANCH_PROFILING is set and
DISABLE_BRANCH_PROFILING is not set, and the declaration is hidden
behind this combination of tests.
But that causes a warning when building with CONFIG_TRACING_BRANCHES,
since that sets DISABLE_BRANCH_PROFILING for the tracing code, and the
declaration is thus hidden:
kernel/trace/trace_branch.c:205:6: error: no previous prototype for 'ftrace_likely_update' [-Werror=missing-prototypes]
Move the declaration out of the #ifdef to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. It was spotted by UBSAN.
So let's just fix this by using the BIT() helper for all SB_* flags.
Fixes: e462ec50cb5f ("VFS: Differentiate mount flags (MS_*) from internal superblock flags")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Message-Id: <20230424051835.374204-1-gehao@kylinos.cn>
[brauner@kernel.org: use BIT() for all SB_* flags]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Set TPM_CHIP_FLAG_SUSPENDED in tpm_pm_suspend() and reset in
tpm_pm_resume(). While the flag is set, tpm_hwrng() gives back zero
bytes. This prevents hwrng from racing during resume.
Cc: stable@vger.kernel.org
Fixes: 6e592a065d51 ("tpm: Move Linux RNG connection to hwrng")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Since the ->xprt_ctxt pointer was added to svc_deferred_req, it has not
been sufficient to use kfree() to free a deferred request. We may need
to free the ctxt as well.
As freeing the ctxt is all that ->xpo_release_rqst() does, we repurpose
it to explicit do that even when the ctxt is not stored in an rqst.
So we now have ->xpo_release_ctxt() which is given an xprt and a ctxt,
which may have been taken either from an rqst or from a dreq. The
caller is now responsible for clearing that pointer after the call to
->xpo_release_ctxt.
We also clear dr->xprt_ctxt when the ctxt is moved into a new rqst when
revisiting a deferred request. This ensures there is only one pointer
to the ctxt, so the risk of double freeing in future is reduced. The
new code in svc_xprt_release which releases both the ctxt and any
rq_deferred depends on this.
Fixes: 773f91b2cf3f ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
