| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver changes for 6.2-rc1.
As in previous kernel releases, nothing big here at all, just some
small incremental serial/tty layer cleanups and some individual driver
additions and fixes. Highlights are:
- serial helper macros from Jiri Slaby to reduce the amount of
duplicated code in serial drivers
- api cleanups and consolidations from Ilpo Järvinen in lots of
serial drivers
- the usual set of n_gsm fixes from Daniel Starke as that code gets
exercised more
- TIOCSTI is finally able to be disabled if requested (security
hardening feature from Kees Cook)
- fsl_lpuart driver fixes and features added
- other small serial driver additions and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits)
serial: atmel: don't stop the transmitter when doing PIO
serial: atmel: cleanup atmel_start+stop_tx()
tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API
serial: sunsab: Fix error handling in sunsab_init()
serial: altera_uart: fix locking in polling mode
serial: pch: Fix PCI device refcount leak in pch_request_dma()
tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused
tty: serial: fsl_lpuart: Add runtime pm support
tty: serial: fsl_lpuart: enable wakeup source for lpuart
serdev: Replace poll loop by readx_poll_timeout() macro
tty: synclink_gt: unwind actions in error path of net device open
serial: stm32: move dma_request_chan() before clk_prepare_enable()
dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity'
serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
serial: amba-pl011: avoid SBSA UART accessing DMACR register
tty: serial: altera_jtaguart: remove struct altera_jtaguart
tty: serial: altera_jtaguart: use uart_port::read_status_mask
tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs
tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars()
n_tty: Rename tail to old_tail in n_tty_read()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the large set of USB and Thunderbolt driver changes for
6.2-rc1. Overall, thanks to the removal of a driver, more lines were
removed than added, a nice change. Highlights include:
- removal of the sisusbvga driver that was not used by anyone anymore
- minor thunderbolt driver changes and tweaks
- chipidea driver updates
- usual set of typec driver features and hardware support added
- musb minor driver fixes
- fotg210 driver fixes, bringing that hardware back from the "dead"
- minor dwc3 driver updates
- addition, and then removal, of a list.h helper function for many
USB and other subsystem drivers, that ended up breaking the build.
That will come back for 6.3-rc1, it missed this merge window.
- usual xhci updates and enhancements
- usb-serial driver updates and support for new devices
- other minor USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits)
usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags
usb: dwc2: power on/off phy for peripheral mode in dual-role mode
usb: dwc2: disable lpm feature on Rockchip SoCs
dt-bindings: usb: mtk-xhci: add support for mt7986
usb: dwc3: core: defer probe on ulpi_read_id timeout
usb: ulpi: defer ulpi_register on ulpi_read_id timeout
usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
dt-bindings: vendor-prefixes: add Genesys Logic
usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe()
usb: typec: tipd: Set mode of operation for USB Type-C connector
usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST
usb: musb: remove extra check in musb_gadget_vbus_draw
usb: gadget: uvc: Prevent buffer overflow in setup handler
usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init
usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()
usb: storage: Add check for kcalloc
USB: sisusbvga: use module_usb_driver()
USB: sisusbvga: rename sisusb.c to sisusbvga.c
USB: sisusbvga: remove console support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add options to the osnoise tracer:
- 'panic_on_stop' option that panics the kernel if osnoise is
greater than some user defined threshold.
- 'preempt' option, to test noise while preemption is disabled
- 'irq' option, to test noise when interrupts are disabled
- Add .percent and .graph suffix to histograms to give different
outputs
- Add nohitcount to disable showing hitcount in histogram output
- Add new __cpumask() to trace event fields to annotate that a unsigned
long array is a cpumask to user space and should be treated as one.
- Add trace_trigger kernel command line parameter to enable trace event
triggers at boot up. Useful to trace stack traces, disable tracing
and take snapshots.
- Fix x86/kmmio mmio tracer to work with the updates to lockdep
- Unify the panic and die notifiers
- Add back ftrace_expect reference that is used to extract more
information in the ftrace_bug() code.
- Have trigger filter parsing errors show up in the tracing error log.
- Updated MAINTAINERS file to add kernel tracing mailing list and
patchwork info
- Use IDA to keep track of event type numbers.
- And minor fixes and clean ups
* tag 'trace-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits)
tracing: Fix cpumask() example typo
tracing: Improve panic/die notifiers
ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY kernels
tracing: Do not synchronize freeing of trigger filter on boot up
tracing: Remove pointer (asterisk) and brackets from cpumask_t field
tracing: Have trigger filter parsing errors show up in error_log
x86/mm/kmmio: Remove redundant preempt_disable()
tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line
Documentation/osnoise: Add osnoise/options documentation
tracing/osnoise: Add preempt and/or irq disabled options
tracing/osnoise: Add PANIC_ON_STOP option
Documentation/osnoise: Escape underscore of NO_ prefix
tracing: Fix some checker warnings
tracing/osnoise: Make osnoise_options static
tracing: remove unnecessary trace_trigger ifdef
ring-buffer: Handle resize in early boot up
tracing/hist: Fix issue of losting command info in error_log
tracing: Fix issue of missing one synthetic field
tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx'
tracing/hist: Fix wrong return value in parse_action_params()
...
|
|
Commit 9130b8dbc6ac ("SUNRPC: allow for upcalls for the same uid
but different gss service") introduced `auth` argument to
__gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL
since it (and auth->service) was not (yet) determined.
When multiple upcalls with the same uid and different service are
ongoing, it could happen that __gss_find_upcall(), which returns the
first match found in the pipe->in_downcall list, could not find the
correct gss_msg corresponding to the downcall we are looking for.
Moreover, it might return a msg which is not sent to rpc.gssd yet.
We could see mount.nfs process hung in D state with multiple mount.nfs
are executed in parallel. The call trace below is of CentOS 7.9
kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/
elrepo kernel-ml-6.0.7-1.el7.
PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs"
#0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f
#1 [ffff9203ca323580] schedule at ffffffffa3b88eb9
#2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss]
#3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc
[sunrpc]
#4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss]
#5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc]
#6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc]
#7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc]
#8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc]
#9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc]
The scenario is like this. Let's say there are two upcalls for
services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe.
When rpc.gssd reads pipe to get the upcall msg corresponding to
service B from pipe->pipe and then writes the response, in
gss_pipe_downcall the msg corresponding to service A will be picked
because only uid is used to find the msg and it is before the one for
B in pipe->in_downcall. And the process waiting for the msg
corresponding to service A will be woken up.
Actual scheduing of that process might be after rpc.gssd processes the
next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A).
The process is scheduled to see gss_msg->ctx == NULL and
gss_msg->msg.errno == 0, therefore it cannot break the loop in
gss_create_upcall and is never woken up after that.
This patch adds a simple check to ensure that a msg which is not
sent to rpc.gssd yet is not chosen as the matching upcall upon
receiving a downcall.
Signed-off-by: minoura makoto <minoura@valinux.co.jp>
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@nec.com>
Tested-by: Hiroshi Shimamoto <h-shimamoto@nec.com>
Cc: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 9130b8dbc6ac ("SUNRPC: allow for upcalls for same uid but different gss service")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull VFIO updates from Alex Williamson:
- Replace deprecated git://github.com link in MAINTAINERS (Palmer
Dabbelt)
- Simplify vfio/mlx5 with module_pci_driver() helper (Shang XiaoJing)
- Drop unnecessary buffer from ACPI call (Rafael Mendonca)
- Correct latent missing include issue in iova-bitmap and fix support
for unaligned bitmaps. Follow-up with better fix through refactor
(Joao Martins)
- Rework ccw mdev driver to split private data from parent structure,
better aligning with the mdev lifecycle and allowing us to remove a
temporary workaround (Eric Farman)
- Add an interface to get an estimated migration data size for a
device, allowing userspace to make informed decisions, ex. more
accurately predicting VM downtime (Yishai Hadas)
- Fix minor typo in vfio/mlx5 array declaration (Yishai Hadas)
- Simplify module and Kconfig through consolidating SPAPR/EEH code and
config options and folding virqfd module into main vfio module (Jason
Gunthorpe)
- Fix error path from device_register() across all vfio mdev and sample
drivers (Alex Williamson)
- Define migration pre-copy interface and implement for vfio/mlx5
devices, allowing portions of the device state to be saved while the
device continues operation, towards reducing the stop-copy state size
(Jason Gunthorpe, Yishai Hadas, Shay Drory)
- Implement pre-copy for hisi_acc devices (Shameer Kolothum)
- Fixes to mdpy mdev driver remove path and error path on probe (Shang
XiaoJing)
- vfio/mlx5 fixes for incorrect return after copy_to_user() fault and
incorrect buffer freeing (Dan Carpenter)
* tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio: (42 commits)
vfio/mlx5: error pointer dereference in error handling
vfio/mlx5: fix error code in mlx5vf_precopy_ioctl()
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
hisi_acc_vfio_pci: Enable PRE_COPY flag
hisi_acc_vfio_pci: Move the dev compatibility tests for early check
hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions
hisi_acc_vfio_pci: Add support for precopy IOCTL
vfio/mlx5: Enable MIGRATION_PRE_COPY flag
vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error
vfio/mlx5: Introduce multiple loads
vfio/mlx5: Consider temporary end of stream as part of PRE_COPY
vfio/mlx5: Introduce vfio precopy ioctl implementation
vfio/mlx5: Introduce SW headers for migration states
vfio/mlx5: Introduce device transitions of PRE_COPY
vfio/mlx5: Refactor to use queue based data chunks
vfio/mlx5: Refactor migration file state
vfio/mlx5: Refactor MKEY usage
vfio/mlx5: Refactor PD usage
vfio/mlx5: Enforce a single SAVE command at a time
vfio: Extend the device migration protocol with PRE_COPY
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a97d: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
|
|
Since __HAVE_ARCH_* style guards have been depricated in favour of
defining the function name onto itself, convert pxxp_get().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Y2EUEBlQXNgaJgoI@hirez.programming.kicks-ass.net
|
|
There's no point in having the identical routines for PTE/PMD have
different names.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221022114424.841277397%40infradead.org
|
|
Since it no longer applies to only PTEs, rename it to PXX.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221022114424.776404066%40infradead.org
|
|
AFAICT there's no reason to do anything different than what we do for
PTEs. Make it so (also affects SH).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221022114424.711181252%40infradead.org
|
|
Improve the comment.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221022114424.515572025%40infradead.org
|
|
Provide a native implementation of set_memory_rox(), avoiding the
double set_memory_ro();set_memory_x(); calls.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Because endlessly repeating:
set_memory_ro()
set_memory_x()
is getting tedious.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Y1jek64pXOsougmz@hirez.programming.kicks-ass.net
|
|
Instead of duplicating init_mm, allocate a fresh mm. The advantage is
that mm_alloc() has much simpler dependencies. Additionally it makes
more conceptual sense, init_mm has no (and must not have) user state
to duplicate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221025201057.816175235@infradead.org
|
|
In order to allow using mm_alloc() much earlier, move initializing
mm_cachep into mm_init().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221025201057.751153381@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a new GPIO multiplexer driver, bunch of driver updates and
refactoring in the core GPIO library.
GPIO core:
- teach gpiolib to work with software nodes for HW description
- remove ARCH_NR_GPIOS treewide as we no longer impose any limit on
the number of GPIOS since the allocation became entirely dynamic
- add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC
controller, Freescale PCIe and Ethernet controller, Himax LCDs and
Mediatek mt2701
- refactor OF quirk code
- some general refactoring of the OF and ACPI code, adding new
helpers, minor tweaks and fixes, making fwnode usage consistent
etc.
GPIO uAPI:
- fix an issue where the user-space can trigger a NULL-pointer
dereference in the kernel by opening a device file, forcing a
driver unbind and then calling one of the syscalls on the
associated file descriptor
New drivers:
- add gpio-latch: a new GPIO multiplexer based on latches connected
to other GPIOs
Driver updates:
- convert i2c GPIO expanders to using .probe_new()
- drop the gpio-sta2x11 driver
- factor out common code for the ACCES IDIO-16 family of controllers
and use this new library wherever applicable in drivers
- add DT support to gpio-hisi
- allow building gpio-davinci as a module and increase its maxItems
property
- add support for a new model to gpio-pca9570
- other minor changes to various drivers"
* tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits)
gpio: sim: set a limit on the number of GPIOs
gpiolib: protect the GPIO device against being dropped while in use by user-space
gpiolib: cdev: fix NULL-pointer dereferences
gpiolib: Provide to_gpio_device() helper
gpiolib: Unify access to the device properties
gpio: Do not include <linux/kernel.h> when not really needed.
gpio: pcf857x: Convert to i2c's .probe_new()
gpio: pca953x: Convert to i2c's .probe_new()
gpio: max732x: Convert to i2c's .probe_new()
dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names
gpiolib: ensure that fwnode is properly set
gpio: sl28cpld: Replace irqchip mask_invert with unmask_base
gpiolib: of: Use correct fwnode for DT-probed chips
gpiolib: of: Drop redundant check in of_mm_gpiochip_remove()
gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode
gpiolib: add support for software nodes
gpiolib: consolidate GPIO lookups
gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers
gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes
gpiolib: acpi: change acpi_find_gpio() to accept firmware node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Add the call depth tracking mitigation for Retbleed which has been
long in the making. It is a lighterweight software-only fix for
Skylake-based cores where enabling IBRS is a big hammer and causes a
significant performance impact.
What it basically does is, it aligns all kernel functions to 16 bytes
boundary and adds a 16-byte padding before the function, objtool
collects all functions' locations and when the mitigation gets
applied, it patches a call accounting thunk which is used to track
the call depth of the stack at any time.
When that call depth reaches a magical, microarchitecture-specific
value for the Return Stack Buffer, the code stuffs that RSB and
avoids its underflow which could otherwise lead to the Intel variant
of Retbleed.
This software-only solution brings a lot of the lost performance
back, as benchmarks suggest:
https://lore.kernel.org/all/20220915111039.092790446@infradead.org/
That page above also contains a lot more detailed explanation of the
whole mechanism
- Implement a new control flow integrity scheme called FineIBT which is
based on the software kCFI implementation and uses hardware IBT
support where present to annotate and track indirect branches using a
hash to validate them
- Other misc fixes and cleanups
* tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
x86/paravirt: Use common macro for creating simple asm paravirt functions
x86/paravirt: Remove clobber bitmask from .parainstructions
x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al
x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit
x86/Kconfig: Enable kernel IBT by default
x86,pm: Force out-of-line memcpy()
objtool: Fix weak hole vs prefix symbol
objtool: Optimize elf_dirty_reloc_sym()
x86/cfi: Add boot time hash randomization
x86/cfi: Boot time selection of CFI scheme
x86/ibt: Implement FineIBT
objtool: Add --cfi to generate the .cfi_sites section
x86: Add prefix symbols for function padding
objtool: Add option to generate prefix symbols
objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf
objtool: Slice up elf_create_section_symbol()
kallsyms: Revert "Take callthunks into account"
x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces
x86/retpoline: Fix crash printing warning
x86/paravirt: Fix a !PARAVIRT build warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Optimise away self-test overhead when they are disabled
- Support symmetric encryption via keyring keys in af_alg
- Flip hwrng default_quality, the default is now maximum entropy
Algorithms:
- Add library version of aesgcm
- CFI fixes for assembly code
- Add arm/arm64 accelerated versions of sm3/sm4
Drivers:
- Remove assumption on arm64 that kmalloc is DMA-aligned
- Fix selftest failures in rockchip
- Add support for RK3328/RK3399 in rockchip
- Add deflate support in qat
- Merge ux500 into stm32
- Add support for TEE for PCI ID 0x14CA in ccp
- Add mt7986 support in mtk
- Add MaxLinear platform support in inside-secure
- Add NPCM8XX support in npcm"
* tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
crypto: ux500/cryp - delete driver
crypto: stm32/cryp - enable for use with Ux500
crypto: stm32 - enable drivers to be used on Ux500
dt-bindings: crypto: Let STM32 define Ux500 CRYP
hwrng: geode - Fix PCI device refcount leak
hwrng: amd - Fix PCI device refcount leak
crypto: qce - Set DMA alignment explicitly
crypto: octeontx2 - Set DMA alignment explicitly
crypto: octeontx - Set DMA alignment explicitly
crypto: keembay - Set DMA alignment explicitly
crypto: safexcel - Set DMA alignment explicitly
crypto: hisilicon/hpre - Set DMA alignment explicitly
crypto: chelsio - Set DMA alignment explicitly
crypto: ccree - Set DMA alignment explicitly
crypto: ccp - Set DMA alignment explicitly
crypto: cavium - Set DMA alignment explicitly
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
crypto: arm64/ghash-ce - use frame_push/pop macros consistently
crypto: arm64/crct10dif - use frame_push/pop macros consistently
crypto: arm64/aes-modes - use frame_push/pop macros consistently
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
|
|
Pull XFS updates from Darrick Wong:
"The highlight of this is a batch of fixes for the online metadata
checking code as we start the loooong march towards merging online
repair. I aim to merge that in time for the 2023 LTS.
There are also a large number of data corruption and race condition
fixes in this patchset. Most notably fixed are write() calls to
unwritten extents racing with writeback, which required some late(r
than I prefer) code changes to iomap to support the necessary
revalidations. I don't really like iomap changes going in past -rc4,
but Dave and I have been working on it long enough that I chose to
push it for 6.2 anyway.
There are also a number of other subtle problems fixed, including the
log racing with inode writeback to write inodes with incorrect link
count to disk; file data mapping corruptions as a result of incorrect
lock cycling when attaching dquots; refcount metadata corruption if
one actually manages to share a block 2^32 times; and the log
clobbering cow staging extents if they were formerly metadata blocks.
Summary:
- Fix a race condition w.r.t. percpu inode free counters
- Fix a broken error return in xfs_remove
- Print FS UUID at mount/unmount time
- Numerous fixes to the online fsck code
- Fix inode locking inconsistency problems when dealing with realtime
metadata files
- Actually merge pull requests so that we capture the cover letter
contents
- Fix a race between rebuilding VFS inode state and the AIL flushing
inodes that could cause corrupt inodes to be written to the
filesystem
- Fix a data corruption problem resulting from a write() to an
unwritten extent racing with writeback started on behalf of memory
reclaim changing the extent state
- Add debugging knobs so that we can test iomap invalidation
- Fix the blockdev pagecache contents being stale after unmounting
the filesystem, leading to spurious xfs_db errors and corrupt
metadumps
- Fix a file mapping corruption bug due to ilock cycling when
attaching dquots to a file during delalloc reservation
- Fix a refcount btree corruption problem due to the refcount
adjustment code not handling MAXREFCOUNT correctly, resulting in
unnecessary record splits
- Fix COW staging extent alloctions not being classified as USERDATA,
which results in filestreams being ignored and possible data
corruption if the allocation was filled from the AGFL and the block
buffer is still being tracked in the AIL
- Fix new duplicated includes
- Fix a race between the dquot shrinker and dquot freeing that could
cause a UAF"
* tag 'xfs-6.2-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (50 commits)
xfs: dquot shrinker doesn't check for XFS_DQFLAG_FREEING
xfs: Remove duplicated include in xfs_iomap.c
xfs: invalidate xfs_bufs when allocating cow extents
xfs: get rid of assert from xfs_btree_islastblock
xfs: estimate post-merge refcounts correctly
xfs: hoist refcount record merge predicates
xfs: fix super block buf log item UAF during force shutdown
xfs: wait iclog complete before tearing down AIL
xfs: attach dquots to inode before reading data/cow fork mappings
xfs: shut up -Wuninitialized in xfsaild_push
xfs: use memcpy, not strncpy, to format the attr prefix during listxattr
xfs: invalidate block device page cache during unmount
xfs: add debug knob to slow down write for fun
xfs: add debug knob to slow down writeback for fun
xfs: drop write error injection is unfixable, remove it
xfs: use iomap_valid method to detect stale cached iomaps
iomap: write iomap validity checks
xfs: xfs_bmap_punch_delalloc_range() should take a byte range
iomap: buffered write failure should not truncate the page cache
xfs,iomap: move delalloc punching to iomap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and
make more things static.
- Make portdrv bind to Switch Ports that have AER. Previously, if
these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant
the Ports couldn't be suspended to low-power states. AER on these
Ports doesn't use interrupts, and the AER driver doesn't need to
claim them.
- Assign PCI domain IDs using ida_alloc(), which makes host bridge
add/remove work better.
Resource management:
- To work better with recent BIOSes that use EfiMemoryMappedIO for
PCI host bridge apertures, remove those regions from the E820 map
(E820 entries normally prevent us from allocating BARs). In v5.19,
we added some quirks to disable E820 checking, but that's not very
maintainable. EfiMemoryMappedIO means the OS needs to map the
region for use by EFI runtime services; it shouldn't prevent OS
from using it.
PCIe native device hotplug:
- Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4
PCIe tunneling depends on native PCIe hotplug.
- Enable Command Completed Interrupt only if supported to avoid user
confusion from lspci output that says this is enabled but not
supported.
- Prevent pciehp from binding to Switch Upstream Ports; this happened
because of interaction with acpiphp and caused devices below the
Upstream Port to disappear.
Power management:
- Convert AGP drivers to generic power management. We hope to remove
legacy power management from the PCI core eventually.
Virtualization:
- Fix pci_device_is_present(), which previously always returned
"false" for VFs, causing virtio hangs when unbinding the driver.
Miscellaneous:
- Convert drivers to gpiod API to prepare for dropping some legacy
code.
- Fix DOE fencepost error for the maximum data object length.
Baikal-T1 PCIe controller driver:
- Add driver and DT bindings.
Broadcom STB PCIe controller driver:
- Enable Multi-MSI.
- Delay 100ms after PERST# deassert to allow power and clocks to
stabilize.
- Configure Read Completion Boundary to 64 bytes.
Freescale i.MX6 PCIe controller driver:
- Initialize PHY before deasserting core reset to fix a regression in
v6.0 on boards where the PHY provides the reference.
- Fix imx6sx and imx8mq clock names in DT schema.
Intel VMD host bridge driver:
- Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe
SSDs in VT-d pass-through scenarios.
- Disable MSI remapping, which gets re-enabled by firmware during
suspend/resume.
MediaTek PCIe Gen3 controller driver:
- Add MT7986 and MT8195 support.
Qualcomm PCIe controller driver:
- Add SC8280XP/SA8540P basic interconnect support.
Rockchip DesignWare PCIe controller driver:
- Base DT schema on common Synopsys schema.
Synopsys DesignWare PCIe core:
- Collect DT items shared between Root Port and Endpoint (PERST GPIO,
PHY info, clocks, resets, link speed, number of lanes, number of
iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml.
- Add dma-ranges support for Root Ports and Endpoints.
- Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to
reduce code duplication.
- Add generic names for clocks and resets to encourage more
consistent naming across drivers using DesignWare IP.
- Stop advertising PTM Responder role for Endpoints, which aren't
allowed to be responders.
TI J721E PCIe driver:
- Add j721s2 host mode ID to DT schema.
- Add interrupt properties to DT schema.
Toshiba Visconti PCIe controller driver:
- Fix interrupts array max constraints in DT schema"
* tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits)
x86/PCI: Use pr_info() when possible
x86/PCI: Fix log message typo
x86/PCI: Tidy E820 removal messages
PCI: Skip allocate_resource() if too little space available
efi/x86: Remove EfiMemoryMappedIO from E820 map
PCI/portdrv: Allow AER service only for Root Ports & RCECs
PCI: xilinx-nwl: Fix coding style violations
PCI: mvebu: Switch to using gpiod API
PCI: pciehp: Enable Command Completed Interrupt only if supported
PCI: aardvark: Switch to using devm_gpiod_get_optional()
dt-bindings: PCI: mediatek-gen3: add support for mt7986
dt-bindings: PCI: mediatek-gen3: add SoC based clock config
dt-bindings: PCI: qcom: Allow 'dma-coherent' property
PCI: mt7621: Add sentinel to quirks table
PCI: vmd: Fix secondary bus reset for Intel bridges
PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"A non-urgent fix and SETDASA is now exported to drivers"
* tag 'i3c/for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
MAINTAINERS: mark I3C DRIVER FOR SYNOPSYS DESIGNWARE orphan
i3c: export SETDASA method
i3c: Correct the macro module_i3c_i2c_driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd implementation from Jason Gunthorpe:
"iommufd is the user API to control the IOMMU subsystem as it relates
to managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU
device specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance
the combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a guest.
Dirty tracking enables VM live migration with SRIOV devices and PASID
support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs,
which is currently VFIO and VDPA"
For more background, see the extended explanations in Jason's pull request:
https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits)
iommufd: Change the order of MSI setup
iommufd: Improve a few unclear bits of code
iommufd: Fix comment typos
vfio: Move vfio group specific code into group.c
vfio: Refactor dma APIs for emulated devices
vfio: Wrap vfio group module init/clean code into helpers
vfio: Refactor vfio_device open and close
vfio: Make vfio_device_open() truly device specific
vfio: Swap order of vfio_device_container_register() and open_device()
vfio: Set device->group in helper function
vfio: Create wrappers for group register/unregister
vfio: Move the sanity check of the group to vfio_create_group()
vfio: Simplify vfio_create_group()
iommufd: Allow iommufd to supply /dev/vfio/vfio
vfio: Make vfio_container optionally compiled
vfio: Move container related MODULE_ALIAS statements into container.c
vfio-iommufd: Support iommufd for emulated VFIO devices
vfio-iommufd: Support iommufd for physical VFIO devices
vfio-iommufd: Allow iommufd to be used in place of a container fd
vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
|
|
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Split MTRR and PAT init code to accomodate at least Xen PV and TDX
guests which do not get MTRRs exposed but only PAT. (TDX guests do
not support the cache disabling dance when setting up MTRRs so they
fall under the same category)
This is a cleanup work to remove all the ugly workarounds for such
guests and init things separately (Juergen Gross)
- Add two new Intel CPUs to the list of CPUs with "normal" Energy
Performance Bias, leading to power savings
- Do not do bus master arbitration in C3 (ARB_DISABLE) on modern
Centaur CPUs
* tag 'x86_cpu_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
x86/mtrr: Make message for disabled MTRRs more descriptive
x86/pat: Handle TDX guest PAT initialization
x86/cpuid: Carve out all CPUID functionality
x86/cpu: Switch to cpu_feature_enabled() for X86_FEATURE_XENPV
x86/cpu: Remove X86_FEATURE_XENPV usage in setup_cpu_entry_area()
x86/cpu: Drop 32-bit Xen PV guest code in update_task_stack()
x86/cpu: Remove unneeded 64-bit dependency in arch_enter_from_user_mode()
x86/cpufeatures: Add X86_FEATURE_XENPV to disabled-features.h
x86/acpi/cstate: Optimize ARB_DISABLE on Centaur CPUs
x86/mtrr: Simplify mtrr_ops initialization
x86/cacheinfo: Switch cache_ap_init() to hotplug callback
x86: Decouple PAT and MTRR handling
x86/mtrr: Add a stop_machine() handler calling only cache_cpu_init()
x86/mtrr: Let cache_aps_delayed_init replace mtrr_aps_delayed_init
x86/mtrr: Get rid of __mtrr_enabled bool
x86/mtrr: Simplify mtrr_bp_init()
x86/mtrr: Remove set_all callback from struct mtrr_ops
x86/mtrr: Disentangle MTRR init from PAT init
x86/mtrr: Move cache control code to cacheinfo.c
x86/mtrr: Split MTRR-specific handling from cache dis/enabling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Another fairly sizable pull request, by EFI subsystem standards.
Most of the work was done by me, some of it in collaboration with the
distro and bootloader folks (GRUB, systemd-boot), where the main focus
has been on removing pointless per-arch differences in the way EFI
boots a Linux kernel.
- Refactor the zboot code so that it incorporates all the EFI stub
logic, rather than calling the decompressed kernel as a EFI app.
- Add support for initrd= command line option to x86 mixed mode.
- Allow initrd= to be used with arbitrary EFI accessible file systems
instead of just the one the kernel itself was loaded from.
- Move some x86-only handling and manipulation of the EFI memory map
into arch/x86, as it is not used anywhere else.
- More flexible handling of any random seeds provided by the boot
environment (i.e., systemd-boot) so that it becomes available much
earlier during the boot.
- Allow improved arch-agnostic EFI support in loaders, by setting a
uniform baseline of supported features, and adding a generic magic
number to the DOS/PE header. This should allow loaders such as GRUB
or systemd-boot to reduce the amount of arch-specific handling
substantially.
- (arm64) Run EFI runtime services from a dedicated stack, and use it
to recover from synchronous exceptions that might occur in the
firmware code.
- (arm64) Ensure that we don't allocate memory outside of the 48-bit
addressable physical range.
- Make EFI pstore record size configurable
- Add support for decoding CXL specific CPER records"
* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
arm64: efi: Recover from synchronous exceptions occurring in firmware
arm64: efi: Execute runtime services from a dedicated stack
arm64: efi: Limit allocations to 48-bit addressable physical region
efi: Put Linux specific magic number in the DOS header
efi: libstub: Always enable initrd command line loader and bump version
efi: stub: use random seed from EFI variable
efi: vars: prohibit reading random seed variables
efi: random: combine bootloader provided RNG seed with RNG protocol output
efi/cper, cxl: Decode CXL Error Log
efi/cper, cxl: Decode CXL Protocol Error Section
efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
efi: x86: Move EFI runtime map sysfs code to arch/x86
efi: runtime-maps: Clarify purpose and enable by default for kexec
efi: pstore: Add module parameter for setting the record size
efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
efi: memmap: Move manipulation routines into x86 arch tree
efi: memmap: Move EFI fake memmap support into x86 arch tree
efi: libstub: Undeprecate the command line initrd loader
efi: libstub: Add mixed mode support to command line initrd loader
efi: libstub: Permit mixed mode return types other than efi_status_t
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"Only a small step forward on the sysctl cleanups for this cycle"
* tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sched: Move numa_balancing sysctls to its own file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Tux gets for xmas an improvement to the average lookup performance of
kallsyms_lookup_name() by 715x thanks to the work by Zhen Lei, which
upgraded our old implementation from being O(n) to O(log(n)), while
also retaining the old implementation support on /proc/kallsyms.
The only penalty was increasing the memory footprint by 3 *
kallsyms_num_syms. Folks who want to improve this further now also
have a dedicated selftest facility through KALLSYMS_SELFTEST.
Stephen Boyd added zstd in-kernel decompression support, but the only
users of this would be folks using the load-pin LSM because otherwise
we do module decompression in userspace.
The only other thing with mentioning is a minor boot time optimization
by Rasmus Villemoes which deferes param_sysfs_init() to late init. The
rest is cleanups and minor fixes"
* tag 'modules-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
livepatch: Call klp_match_callback() in klp_find_callback() to avoid code duplication
module/decompress: Support zstd in-kernel decompression
kallsyms: Remove unneeded semicolon
kallsyms: Add self-test facility
livepatch: Use kallsyms_on_each_match_symbol() to improve performance
kallsyms: Add helper kallsyms_on_each_match_symbol()
kallsyms: Reduce the memory occupied by kallsyms_seqs_of_names[]
kallsyms: Correctly sequence symbols when CONFIG_LTO_CLANG=y
kallsyms: Improve the performance of kallsyms_lookup_name()
scripts/kallsyms: rename build_initial_tok_table()
module: Fix NULL vs IS_ERR checking for module_get_next_page
kernel/params.c: defer most of param_sysfs_init() to late_initcall time
module: Remove unused macros module_addr_min/max
module: remove redundant module_sysfs_initialized variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver updates from Stephen Boyd:
"A pile of clk driver updates with a small tracepoint patch to the clk
core this time around.
The core framework is effectively unchanged, with the majority of the
diff going to the Qualcomm clk driver directory because they added two
3k line files that are almost all clk data (Abel Vesa from Linaro
tried to shrink the number of lines down, but it doesn't seem to be
possible without sacrificing readability).
The second big driver this time around is the Rockchip rk3588 clk and
reset unit, at _only_ 2.5k lines.
Ignoring the big clk drivers from the familiar SoC vendors, there's
just a bunch of little clk driver updates and fixes throughout here.
It's the usual set of clk data fixups to describe proper parents, or
add frequencies to frequency tables, or plug memory leaks when
function calls fail. Also, some drivers are converted to use modern
clk_hw APIs, which is always nice to see. And data is deduplicated,
leading to a smaller kernel Image.
Overall this batch has a larger collection of cleanups than it
typically does. Maybe that means there are less new SoCs right now
that need supporting, and the focus has shifted to quality and
reliability. I can dream.
New Drivers:
- Frequency hopping controller hardware on MediaTek MT8186
- Global clock controller for Qualcomm SM8550
- Display clock controller for Qualcomm SC8280XP
- RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
- CPU PLL on MStar/SigmaStar SoCs
- Support for the clock and reset unit of the Rockchip rk3588
Updates:
- Tracepoints for clk_rate_request structures
- Debugfs support for fractional divider clk
- Make MxL's CGU driver secure compatible
- Ingenic JZ4755 SoC clk support
- Support audio clks on X1000 SoCs
- Remove flags from univ/main/syspll child fixed factor clocks across
MediaTek platforms
- Fix clock dependency for ADC on MediaTek MT7986
- Fix parent for FlexSPI clock for i.MX93
- Add USB suspend clock on i.MX8MP
- Unmap anatop base on error for i.MX93 driver
- Change enet clock parent to wakeup_axi_root for i.MX93
- Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
- Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
- Add 320MHz and 640MHz entries to PLL146x
- Add audio shared gate and SAI clocks for i.MX8MP
- Fix a possible memory leak in the error path of rockchip PLL
creation
- Fix header guard for V3S clocks
- Add IR module clock for f1c100s
- Correct the parent clocks for the (High Speed) Serial Communication
Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
Switch clocks on Renesas R-Car S4-8
- Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
R-Car V4H
- Two PLL driver fixups for the Amlogic clk driver
- Round SD clock rate to improve parent clock selection
- Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
S4-8
- Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX)
serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI
(RPC-IF) clocks on Renesas R-Car V4H
- Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
Renesas RZ/G2L
- Fix endless loop on Renesas RZ/N1
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
Note: HSCIF0 is used for the serial console on the White-Hawk
development board
- Various clk DT binding improvements and conversions to YAML
- Qualcomm SM8150/SM8250 display clock controller cleaned up
- Some missing clocks for Qualcomm SM8350 added
- Qualcomm MSM8974 Global and Multimedia clock controllers
transitioned to parent_data and parent_hws
- Use parent_data and add network resets for Qualcomm IPQ8074
- Qualcomm Krait clock controller modernized
- Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
controllers
- Enable retention mode on Qualcomm SM8250 USB GDSCs
- Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
clocks which definition could be shared between platforms
- Various NULL pointer checks added for allocations"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits)
clk: nomadik: correct struct name kernel-doc warning
clk: lmk04832: fix kernel-doc warnings
clk: lmk04832: drop superfluous #include
clk: lmk04832: drop unnecessary semicolons
clk: lmk04832: declare variables as const when possible
clk: socfpga: Fix memory leak in socfpga_gate_init()
clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
clk: st: Fix memory leak in st_of_quadfs_setup()
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
clk: Add trace events for rate requests
clk: Store clk_core for clk_rate_request
clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: mmcc-msm8974: move clock parent tables down
clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: gcc-msm8974: move clock parent tables down
clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
...
|
|
Pull MMC and MEMSTICK updates from Ulf Hansson:
"MMC core:
- A few minor improvements and cleanups
MMC host:
- Remove some redundant calls to local_irq_{save,restore}()
- Replace kmap_atomic() with kmap_local_page()
- Take return values from mmc_add_host() into account
- dw_mmc-pltfm: Add support to configure clk-phase for socfpga
- hsq: Minimize latency by using a fifo to dispatch requests
- litex_mmc: Fixup corner case for polling mode
- mtk-sd: Add inline crypto engine clock control
- mtk-sd: Add support for the mediatek MT7986 variant
- renesas_sdhi: Improve reset from HS400 mode
- renesas_sdhi: Take DMA end interrupts into account
- sdhci: Avoid unnecessary update of clock
- sdhci: Fix an SD tuning issue
- sdhci-brcmst: Add Kamal Dasu as maintainer for the Broadcom driver
- sdhci-esdhc-imx: Improve tuning logic
- sdhci-esdhc-imx: Improve support for the imxrt1050 variant
- sdhci_f_sdh30: Add support for non-removable media
- sdhci_f_sdh30: Add support for the Socionext F_SDH30_E51 variant
- sdhci_f_sdh30: Add reset control support
- sdhci-msm: Add support for the Qcom SM8550/SM8350/SM6375 variants
- sdhci-msm: Add support for the Qcom MSM8976 variant
- sdhci-of-arasan: Add support for dynamic configuration
- sdhci-of-esdhc: Limit the clock frequency to confirm to spec
- sdhci-pci: Enable asynchronous probe
- sdhci-sprd: Improve card detection
- sdhci-tegra: Improve reset support
- sdhci-tegra: Add support to program MC stream ID
- sunplus-mmc: Add new mmc driver for the Sunplus SP7021 controller
- vub300: Fix warning splat for SDIO irq
MEMSTICK core:
- memstick: A few minor improvements and cleanups
CLK/IOMMU:
- clk: socfpga: Drop redundant support for clk-phase for the SD/MMC clk
- iommu: Add tegra specific helper to get stream_id"
* tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K
mmc: sdhci-of-esdhc: Modify mismatched function name
memstick/mspro_block: Convert to use sysfs_emit()/sysfs_emit_at() APIs
mmc: sdhci-tegra: Issue CMD and DAT resets together
mmc: sdhci-tegra: Add support to program MC stream ID
mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data
mmc: sdhci-tegra: Sort includes alphabetically
iommu/tegra: Add tegra_dev_iommu_get_stream_id() helper
iommu: Add note about struct iommu_fwspec usage
mmc: sdhci-brcmstb: Resolve "unused" warnings with CONFIG_OF=n
dt-bindings: mmc: sdhci-msm: allow dma-coherent
dt-bindings: mmc: sdhci-msm: drop properties mentioned in common MMC
dt-bindings: mmc: sdhci-msm: cleanup style
dt-bindings: mmc: sdhci-am654: cleanup style
dt-bindings: mmc: sdhci: document sdhci-caps and sdhci-caps-mask
mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
MAINTAINERS: Update maintainer for SDHCI Broadcom BRCMSTB driver
mmc: sdhci-of-esdhc: limit the SDHC clock frequency
mmc: sdhci: Remove unneeded semicolon
mmc: core: Normalize the error handling branch in sd_read_ext_regs()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Cypress Generation 5 touchscreens
- a new driver for Hynitron cstxxx touchscreens
- a new driver for Himax hx83112b touchscreen
- I2C input devices have been converted to use i2c's probe_new()
- a large number of input devices are now using
DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use
__maybe_unused annotations
- improvements to msg2638 touchscreen driver to also support msg2138
- conversion of several input deevine bindings to yaml/DT schema
- changes to select touch drivers to move handling of wake irqs to the
PM core
- other assorted fixes and improvements.
* tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (165 commits)
Input: elants_i2c - delay longer with reset asserted
dt-bindings: input: Convert ti,drv260x to DT schema
dt-bindings: input: gpio-beeper: Convert to yaml schema
Input: pxspad - fix unused data warning when force feedback not enabled
Input: lpc32xx - allow building with COMPILE_TEST
Input: nomadik-ske-keypad - allow building with COMPILE_TEST
Input: pxa27xx-keypad - allow build with COMPILE_TEST
Input: spear-keyboard - improve build coverage using COMPILE_TEST
Input: tegra-kbc - allow build with COMPILE_TEST
Input: tegra-kbc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: tca6416-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: tc3589x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: st-keyscan - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: sh-keysc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: qt1070 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: pxa27x_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: pmic8xxx-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: nomadik-ske-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: mcs-touchkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: max7359-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Various LED binding conversions and clean-ups. Convert the
ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
Consistently reference LED common.yaml or multi-led schemas and
disallow undefined properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or
were missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61"
* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
dt-bindings: leds: Add missing references to common LED schema
dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
dt-bindings: lcdif: Fix constraints for imx8mp
media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
dt-bindings: Drop Jee Heng Sia
dt-bindings: thermal: cooling-devices: Add missing cache related properties
dt-bindings: leds: irled: ir-spi-led: convert to DT schema
dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
dt-bindings: leds: mt6360: rework to match multi-led
dt-bindings: leds: lp55xx: rework to match multi-led
dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
dt-bindings: leds: lp55xx: allow label
dt-bindings: leds: use unevaluatedProperties for common.yaml
dt-bindings: thermal: tsens: Add SM6115 compatible
of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
dt-bindings: Add missing start and/or end of line regex anchors
dt-bindings: qcom,pdc: Add missing compatibles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for OneXPlayer mini AMD sensors
- Ampere's Altra smpro-hwmon driver
New chip and attribute support in existing drivers:
- nct6775: Support for ASUS CROSSHAIR VIII/TUF/ProArt B550M
- pmbus/ltc2978: Support for LTC7132
- aquacomputer_d5next: Support for temperature sensor offsets and
flow sensor pulses
- coretemp: Support for dynamic ttarget and tjmax
Improvements:
- Use devm_regulator_get_enable() where appropriate
- Use sysfs_emit() instead of scnprintf()
- Remove some useless #include <linux/hwmon-vid.h>
- Include <linux/kstrtox.h> when appropriate
- Use simple i2c probe
- it87: Check for a valid chip before using force_id, and new new
module parameter to ignore ACPI resource conflicts
- jc42: Use regmap, and restore min/max/critical temperatures on
resume
- Add reporting power good and status to PMBus based regulators
Last minute fixes:
- emc2305: Fix probing of emc2301/2/3, and fix setting pwm values
manually if THERMAL is enabled
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
hwmon: (emc2305) fix pwm never being able to set lower
hwmon: (emc2305) fix unable to probe emc2301/2/3
hwmon: (dell-smm) Move error message to make probing silent
hwmon: use sysfs_emit() to instead of scnprintf()
hwmon: (oxp-sensors) Fix pwm reading
hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulses
hwmon: (pmbus/core) Implement regulator get_status
hwmon: (oxp-sensors) Add AOK ZOE and Mini PRO
hwmon: (gsc-hwmon) Switch to flexible array to simplify code
hwmon: (pmbus) Add power good support
hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550M
hwmon: (coretemp) Add support for dynamic ttarget
hwmon: (coretemp) Add support for dynamic tjmax
hwmon: (coretemp) rearrange tjmax handing code
hwmon: Remove some useless #include <linux/hwmon-vid.h>
hwmon: (coretemp) Remove obsolete temp_data->valid
hwmon: add OneXPlayer mini AMD sensors driver
hwmon: (aquacomputer_d5next) Clear up macros and comments
hwmon: (it87) Add DMI table for future extensions
hwmon: Include <linux/kstrtox.h> when appropriate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The two large chunks is the header clean-up from Andy and the Qualcomm
DT bindings clean-up from Krzysztof. Each which could give rise to
conflicts, but I haven't seen any.
The YAML conversions happening around the device tree is the biggest
item in the series and is the result of Rob Herrings ambition to
autovalidate these trees against strict schemas and it is paying off
in lots of bugs found and ever prettier device trees. Sooner or later
the transition will be complete, Krzysztof is fixing up all of the
Qualcomm stuff, which is pretty voluminous.
Core changes:
- minor but nice and important documentation clean-ups
New drivers:
- subdriver for the Qualcomm SDM670 SoC
- subdriver for the Intel Moorefield SoC
- trivial support for the NXP Freescale i.MXRT1170 SoC
Other changes and improvements
- major clean-up of the Qualcomm pin control device tree bindings by
Krzysztof
- major header clean-up by Andy
- some immutable irqchip clean-up for the Actions Semiconductor and
Nuvoton drivers
- GPIO helpers for The Cypress cy8c95x0 driver
- bias handling in the Mediatek MT7986 driver
- remove the unused pins-are-numbered concept that never flew"
* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
pinctrl: stm32: Remove check for pins-are-numbered
pinctrl: mediatek: common: Remove check for pins-are-numbered
pinctrl: qcom: remove duplicate included header files
pinctrl: sunxi: d1: Add CAN bus pinmuxes
pinctrl: loongson2: Fix some const correctness
pinctrl: pinconf-generic: add missing of_node_put()
pinctrl: intel: Enumerate PWM device when community has a capability
pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
pwm: lpss: Allow other drivers to enable PWM LPSS
pwm: lpss: Include headers we are the direct user of
pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
pwm: Add a stub for devm_pwmchip_add()
pinctrl: k210: call of_node_put()
pinctrl: starfive: Use existing variable gpio
dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
pinconf-generic: fix style issues in pin_config_param doc
pinctrl: pinctrl-loongson2: fix Kconfig dependency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A busy enough release, but not for the core which has only seen very
small updates. The biggest addition is the readdition of support for
detailed configuration of the timings around chip selects. That had
been removed for lack of use but there's been applications found for
it on Atmel systems. Otherwise the updates are mostly feature
additions and cleanups to existing drivers.
Summary:
- Provide a helper for getting device match data in a way that
abstracts away which firmware interface is being used.
- Re-add the spi_set_cs_timing() API for detailed configuration of
the timing around chip select and support it on Atmel.
- Support for MediaTek MT7986, Microchip PCI1xxxx, Nuvoton WPCM450
FIU and Socionext F_OSPI"
* tag 'spi-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
spi: dt-bindings: Convert Synquacer SPI to DT schema
spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
spi: spi-mtk-nor: Add recovery mechanism for dma read timeout
spi: spi-fsl-lpspi: add num-cs binding for lpspi
spi: spi-fsl-lpspi: support multiple cs for lpspi
spi: mtk-snfi: Add snfi support for MT7986 IC
spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
spi: cadence-quadspi: Add minimum operable clock rate warning to baudrate divisor calculation
spi: microchip: pci1xxxx: Add suspend and resume support for PCI1XXXX SPI driver
spi: dt-bindings: nuvoton,wpcm450-fiu: Fix warning in example (missing reg property)
spi: dt-bindings: nuvoton,wpcm450-fiu: Fix error in example (bogus include)
spi: mediatek: Enable irq when pdata is ready
spi: spi-mtk-nor: Unify write buffer on/off
spi: intel: Add support for SFDP opcode
spi: intel: Take possible chip address into account in intel_spi_read/write_reg()
spi: intel: Implement adjust_op_size()
spi: intel: Use ->replacement_op in intel_spi_hw_cycle()
spi: cadence: Drop obsolete dependency on COMPILE_TEST
spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU) bindings
spi: wpcm-fiu: Add direct map support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite a quiet release for regulator, the diffstat is dominated by the
I2C migration to probe_new() and the newly added MT6357 driver. We've
just one framework addition and the rest is all new device support,
fixes and cleanups.
The framework addition is an API for requesting all regulators defined
in DT, this isn't great practice but has reasonable applications when
there is generic code handling devices on buses where the bus
specification doesn't include power. The immediate application is MDIO
but I believe there's others, it's another API that'll need an eye
keeping on it for undesirable usage.
Summary:
- An API for requesting all regulators defined in DT
- Conversion of lots of drivers to the I2C probe_new() API
- Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and Richtek
RT6190"
* tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (56 commits)
regulator: core: Use different devices for resource allocation and DT lookup
dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes
regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe()
regulator: add mt6357 regulator
regulator: dt-bindings: Add binding schema for mt6357 regulators
regulator: core: fix resource leak in regulator_register()
regulator: core: fix module refcount leak in set_supply()
regulator: core: fix use_count leakage when handling boot-on
regulator: rk808: Use dev_err_probe
regulator: rk808: reduce 'struct rk808' usage
regulator: Drop obsolete dependencies on COMPILE_TEST
regulator: pv88080-regulator: Convert to i2c's .probe_new()
regulator: pfuze100-regulator: Convert to i2c's .probe_new()
regulator: isl6271a-regulator: Convert to i2c's .probe_new()
regulator: fan53555: Convert to i2c's .probe_new()
regulator: act8865-regulator: Convert to i2c's .probe_new()
regulator: qcom-rpmh: Add support for PM8550 regulators
regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550
regulator: tps65023-regulator: Convert to i2c's .probe_new()
regulator: tps62360-regulator: Convert to i2c's .probe_new()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A few new APIs here, support for the FSI bus (which is used in some
PowerPC systems) plus a couple of new APIs, one allowing abstractions
built on top of regmap to tell if the regmap can be used in an atomic
context and one providing a callback for an in flight device which
can't do interrupt masking very well.
There's also a fix that I never got round to sending because it really
should be fixed better but that's not happened yet and it does avoid
the problem, the fix was in -next for a long time"
* tag 'regmap-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Add handle_mask_sync() callback
regmap: Add FSI bus support
regmap: add regmap_might_sleep()
regmap-irq: Use the new num_config_regs property in regmap_add_irq_chip_fwnode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Fix refcount error in del_mtd_device()
- Fix possible resource leak in init_mtd()
- Set ROOT_DEV for partitions marked as rootfs in DT
- Describe marking rootfs partitions in the bindings
- Fix device name leak when register device fails in add_mtd_device()
- Try to find OF node for every MTD partition
- simplify (a bit) code find partition-matching dynamic OF node
MTD driver changes:
- pxa2xx-flash maps: fix memory leak in probe
- BCM parser: refer to ARCH_BCMBCA instead of ARCH_BCM4908
- lpddr2_nvm: Fix possible null-ptr-deref
- inftlcore: fix repeated words in comments
- lart: remove driver
- tplink:
- Add TP-Link SafeLoader partitions table parser and bindings
- Describe TP-Link SafeLoader parser
- Describe TP-Link SafeLoader dynamic subpartitions
- mtdoops:
- Panic caused mtdoops to call mtdoops_erase function immediately
- Add mtdoops_erase function and move mtdoops_inc_counter after it
- Change printk() to counterpart pr_ functions
MTD binding cleanup:
- Fixed-partitions: Fix 'sercomm,scpart-id' schema
- Standardize the style in the examples
- Drop object types when referencing other files
- Argue in favor of keeping additionalProperties set to true
- NVMEM-cells:
- Inherit from MTD partitions
- Drop range property from example
- Partitions:
- Change qcom,smem-part partition type
- Constrain the list of parsers
- Physmap: Reuse the generic definitions
- SPI-NOR: Drop common properties
- Sunxi-nand: Add an example to validate the bindings
- Onenand: Mention the expected node name
- Ingenic: Mark partitions in the controller node as deprecated
- NAND:
- Standardize the child node name
- Drop common properties already defined in generic files
- nand-chip.yaml should reference mtd.yaml
- Remove useless file about partitions
- Clarify all partition subnodes
SPI NOR core changes:
- Add support for flash reset using the dt reset-gpios property.
- Update hwcaps.mask to include 8D-8D-8D read and page program ops
when xSPI profile 1.0 table is defined.
- Bypass zero erase size in spi_nor_find_best_erase_type().
- Fix select_uniform_erase to skip 0 erase size
- Add generic flash driver. If a flash is not found in the flash_info
array, fall back to the generic flash driver which is described
solely by the flash's SFDP tables.
- Fix the number of bytes for the dummy cycles in
spi_nor_spimem_check_readop().
- Introduce SPI_NOR_QUAD_PP flag, as PP_1_1_4 is not SFDP
discoverable.
SPI NOR manufacturer drivers changes:
- Spansion:
- use PARSE_SFDP for s28hs512t,
- add support for s28hl512t, s28hl01gt, and s28hs01gt.
- Gigadevice: Replace default_init() with post_bfpt() for gd25q256.
- Micron - ST: Enable locking for mt25qu256a.
- Winbond: Add support for W25Q512NW-IQ.
- ISSI: Use PARSE_SFDP and SPI_NOR_QUAD_PP.
Raw NAND core changes:
- Drop obsolete dependencies on COMPILE_TEST
- MAINTAINERS: rectify entry for MESON NAND controller bindings
- Drop EXPORT_SYMBOL_GPL for nanddev_erase()
Raw NAND driver changes:
- marvell: Enable NFC/DEVBUS arbiter
- gpmi: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
- mpc5121: Replace NO_IRQ by 0
- lpc32xx_{slc,mlc}:
- Switch to using pm_ptr()
- Switch to using gpiod API
- lpc32xx_mlc: Switch to using pm_ptr()
- cadence: Support 64-bit slave dma interface
- rockchip: Describe rk3128-nfc in the bindings
- brcmnand: Update interrupts description in the bindings
SPI-NAND driver changes:
- winbond:
- Add Winbond W25N02KV flash support
- Fix flash identification"
* tag 'mtd/for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
mtd: rawnand: Drop obsolete dependencies on COMPILE_TEST
mtd: maps: pxa2xx-flash: fix memory leak in probe
mtd: core: Fix refcount error in del_mtd_device()
mtd: spi-nor: add SFDP fixups for Quad Page Program
mtd: spi-nor: issi: is25wp256: Init flash based on SFDP
mtd: spi-nor: winbond: add support for W25Q512NW-IQ
mtd: spi-nor: micron-st: Enable locking for mt25qu256a
mtd: spi-nor: Fix the number of bytes for the dummy cycles
mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt
mtd: spi-nor: Fix formatting in spi_nor_read_raw() kerneldoc comment
mtd: spi-nor: sysfs: print JEDEC ID for generic flash driver
mtd: spi-nor: add generic flash driver
mtd: spi-nor: fix select_uniform_erase to skip 0 erase size
mtd: spi-nor: move function declaration out of sfdp.h
mtd: spi-nor: remember full JEDEC flash ID
mtd: spi-nor: sysfs: hide manufacturer if it is not set
mtd: spi-nor: hide jedec_id sysfs attribute if not present
mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()
mtd: rawnand: marvell: Enable NFC/DEVBUS arbiter
mtd: parsers: refer to ARCH_BCMBCA instead of ARCH_BCM4908
...
|
|
Pull drm updates from Dave Airlie:
"The biggest highlight is that the accel subsystem framework is merged.
Hopefully for 6.3 we will be able to line up a driver to use it.
In drivers land, i915 enables DG2 support by default now, and nouveau
has a big stability refactoring and initial ampere support, AMD
includes new hw IP support and should build on ARM again. There is
also an ofdrm driver to take over offb on platforms it's used.
Stuff outside my tree, the dma-buf patches hit a few places, the vc4
firmware changes also do, and i915 has some interactions with MEI for
discrete GPUs. I think all of those should have been acked/reviewed by
relevant parties.
New driver:
- ofdrm - replacement for offb
fbdev:
- add support for nomodeset
fourcc:
- add Vivante tiled modifier
core:
- atomic-helpers: CRTC primary plane test fixes, fb access hooks
- connector: TV API consistency, cmdline parser improvements
- send connector hotplug on cleanup
- sort makefile objects
tests:
- sort kunit tests
- improve DP-MST tests
- add kunit helpers to create a device
sched:
- module param for scheduling policy
- refcounting fix
buddy:
- add back random seed log
ttm:
- convert ttm_resource to size_t
- optimize pool allocations
edid:
- HFVSDB parsing support fixes
- logging/debug improvements
- DSC quirks
dma-buf:
- Add unlocked vmap and attachment mapping
- move drivers to common locking convention
- locking improvements
firmware:
- new API for rPI firmware and vc4
xilinx:
- zynqmp: displayport bridge support
- dpsub fix
bridge:
- adv7533: Remove dynamic lane switching
- it6505: Runtime PM support, sync improvements
- ps8640: Handle AUX defer messages
- tc358775: Drop soft-reset over I2C
panel:
- panel-edp: Add INX N116BGE-EA2 C2 and C4 support.
- Jadard JD9365DA-H3
- NewVision NV3051D
amdgpu:
- DCN support on ARM
- DCN 2.1 secure display
- Sienna Cichlid mode2 reset fixes
- new GC 11.x firmware versions
- drop AMD specific DSC workarounds in favour of drm code
- clang warning fixes
- scheduler rework
- SR-IOV fixes
- GPUVM locking fixes
- fix memory leak in CS IOCTL error path
- flexible array updates
- enable new GC/PSP/SMU/NBIO IP
- GFX preemption support for gfx9
amdkfd:
- cache size fixes
- userptr fixes
- enable cooperative launch on gfx 10.3
- enable GC 11.0.4 KFD support
radeon:
- replace kmap with kmap_local_page
- ACPI ref count fix
- HDA audio notifier support
i915:
- DG2 enabled by default
- MTL enablement work
- hotplug refactoring
- VBT improvements
- Display and watermark refactoring
- ADL-P workaround
- temp disable runtime_pm for discrete-
- fix for A380 as a secondary GPU
- Wa_18017747507 for DG2
- CS timestamp support fixes for gen5 and earlier
- never purge busy TTM objects
- use i915_sg_dma_sizes for all backends
- demote GuC kernel contexts to normal priority
- gvt: refactor for new MDEV interface
- enable DC power states on eDP ports
- fix gen 2/3 workarounds
nouveau:
- fix page fault handling
- Ampere acceleration support
- driver stability improvements
- nva3 backlight support
msm:
- MSM_INFO_GET_FLAGS support
- DPU: XR30 and P010 image formats
- Qualcomm SM6115 support
- DSI PHY support for QCM2290
- HDMI: refactored dev init path
- remove exclusive-fence hack
- fix speed-bin detection
- enable clamp to idle on 7c3
- improved hangcheck detection
vmwgfx:
- fb and cursor refactoring
- convert to generic hashtable
- cursor improvements
etnaviv:
- hw workarounds
- softpin MMU fixes
ast:
- atomic gamma LUT support
- convert to SHMEM
lcdif:
- support YUV planes
- Increase DMA burst size
- FIFO threshold tuning
meson:
- fix return type of cvbs mode_valid
mgag200:
- fix PLL setup on some revisions
sun4i:
- A100 and D1 support
udl:
- modesetting improvements
- hot unplug support
vc4:
- support PAL-M
- fix regression preventing 4K @ 60Hz
- fix NULL ptr deref
v3d:
- switch to drm managed resources
renesas:
- RZ/G2L DSI support
- DU Kconfig cleanup
mediatek:
- fixup dpi and hdmi
- MT8188 dpi support
- MT8195 AFBC support
tegra:
- NVDEC hardware on Tegra234 SoC
hdlcd:
- switch to drm managed resources
ingenic:
- fix registration error path
hisilicon:
- convert to drm_mode_init
maildp:
- use managed resources
mtk:
- use drm_mode_init
rockchip:
- use drm_mode_copy"
* tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits)
drm/amdgpu: fix mmhub register base coding error
drm/amdgpu: add tmz support for GC IP v11.0.4
drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4
drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4
drm/amdgpu: enable GFX IP v11.0.4 CG support
drm/amdgpu: Make amdgpu_ring_mux functions as static
drm/amdgpu: generally allow over-commit during BO allocation
drm/amd/display: fix array index out of bound error in DCN32 DML
drm/amd/display: 3.2.215
drm/amd/display: set optimized required for comp buf changes
drm/amd/display: Add debug option to skip PSR CRTC disable
drm/amd/display: correct DML calc error of UrgentLatency
drm/amd/display: correct static_screen_event_mask
drm/amd/display: Ensure commit_streams returns the DC return code
drm/amd/display: read invalid ddc pin status cause engine busy
drm/amd/display: Bypass DET swath fill check for max clocks
drm/amd/display: Disable uclk pstate for subvp pipes
drm/amd/display: Fix DCN2.1 default DSC clocks
drm/amd/display: Enable dp_hdmi21_pcon support
drm/amd/display: prevent seamless boot on displays that don't have the preferred dig
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- DVB core changes to avoid refcount troubles and UAF
- DVB API/core has gained support for DVB-C2 and DVB-S2X
- New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c
- Removal of an unused sensor driver: s5k4ecgx
- Move microchip_csi2dc to a new directory, named after the
manufacturer
- Add media controller support to Microship drivers
- Old Atmel/Microship drivers that don't use media controler got moved
to staging
- New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support
- Allwinner A31 camera sensor driver code was now split into a bridge
and a separate processor driver
- Added a virtual stateless decoder driver in order to test core
support for stateless drivers and test userspace apps using it
- removed platform-based support for ov9650, as this is not used
anymore
- atomisp now uses videobuf2 and supports normal mmap mode
- the imx7-media-csi driver got promoted from staging
- rcar-vin driver has gained support for gen3 UDS (Up Down Scaler)
- most i2c drivers now use I2C .probe_new() kAPI
- lots of drivers fixes, cleanups and improvements
* tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits)
media: s5c73m3: Switch to GPIO descriptors
media: i2c: s5k5baf: switch to using gpiod API
media: i2c: s5k6a3: switch to using gpiod API
media: imx: remove code for non-existing config IMX_GPT_ICAP
media: si470x: Fix use-after-free in si470x_int_in_callback()
media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
media: coda: Add check for kmalloc
media: coda: Add check for dcoda_iram_alloc
dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
media: s5k4ecgx: Delete driver
media: s5k4ecgx: Switch to GPIO descriptors
media: Switch to use dev_err_probe() helper
headers: Remove some left-over license text in include/uapi/linux/v4l2-*
headers: Remove some left-over license text in include/uapi/linux/dvb/
media: usb: pwc-uncompress: Use flex array destination for memcpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This looks like a relatively calm development cycle; there have been
only few changes in ALSA and ASoC core sides while we get lots of
device-specific fixes and updates as usual. Most of commits are about
ASoC, including Intel SOF/AVS and many device tree updates.
Below are some highlights:
Core:
- Improvement in memalloc helper for fallback allocations
- More cleanups of ASoC DAPM code
ASoC:
- Factoring out of mapping hw_params onto SoundWire configuration
- The ever ongoing overhauls of the Intel DSP code continue,
including support for loading libraries and probes with IPC4 on
SOF.
- Support for more sample formats on JZ4740
- Lots of device tree conversions and fixups
- Support for Allwinner D1, a range of AMD and Intel systems,
Mediatek systems with multiple DMICs, Nuvoton NAU8318, NXP
fsl_rpmsg and i.MX93, Qualcomm AudioReach Enable, MFC and SAL,
RealTek RT1318 and Rockchip RK3588
ALSA:
- Addition of PCM kselftest; still minimalistic but can be extended
in future
- Fixes for corner-case XRUNs with USB-audio implicit feedback mode
- Usual device-specific quirk updates for USB- and HD-audio
- FireWire DICE updates
This also contains a few cross-tree updates:
- Some OMAP board file updates for removal of relevant OMAP platforms
- A new I2C API update for I2C probe API adaption
- A DRM update for the further hdmi-codec updates"
* tag 'sound-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (417 commits)
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
ALSA: patch_realtek: Fix Dell Inspiron Plus 16
ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.
ASoC: dt-bindings: Correct Alexandre Belloni email
ASoC: dt-bindings: maxim,max98504: Convert to DT schema
ASoC: dt-bindings: maxim,max98357a: Convert to DT schema
ASoC: dt-bindings: Reference common DAI properties
ASoC: dt-bindings: Extend name-prefix.yaml into common DAI properties
ASoC: rt715: Make read-only arrays capture_reg_H and capture_reg_L static const
ASoC: uniphier: aio-core: Make some read-only arrays static const
ASoC: wcd938x: Make read-only array minCode_param static const
ASoC: qcom: lpass-sc7280: Add maybe_unused tag for system PM ops
ASoC : SOF: amd: Add support for IPC and DSP dumps
ASoC: SOF: amd: Use poll function instead to read ACP_SHA_DSP_FW_QUALIFIER
ALSA: usb-audio: Workaround for XRUN at prepare
ALSA: pcm: Handle XRUN at trigger START
ALSA: pcm: Set missing stop_operating flag at undoing trigger start
drm: tda99x: Don't advertise non-existent capture support
ASoC: hdmi-codec: Allow playback and capture to be disabled
kselftest/alsa: Add more coverage of sample rates and channel counts
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
"The ususal set of driver fixes and improvements as well as several
patches improving libata core in preparation of the introduction of
the support for the command duration limits feature. In more details:
- Define the missing COMPLETED sense key in scsi header (me)
- Several patches to improve libata handling of the status of
completed commands and the retry and sense data reported to the
scsi layer for failed commands. In particular, this widen the
support for NCQ autosense to all drives that support this feature
instead of restricting this feature use to ZAC drives only (Niklas)
- Cleanup of the pata_mpc52xx and sata_dwc_460ex drivers to remove
the use of the deprecated NO_IRQ macro (Christophe)
- Fix build dedependency on OF vs use of the of_match_ptr() macro to
avoid build errors with the sata_gemini and pata_ftide010 drivers
(me)
- Some libata cleanups using the new helper function
ata_port_is_frozen() (Niklas)
- Improve internal command handling by not retrying commands that
failed with a timeout (Niklas)
- Remove code for several unused libata helper functions (from
Niklas)
- Remove the palmchip pata_bk3710 driver. A couple of other driver
removal should come in through the arm tree pull request (from
Arnd)
- Remove unused variable and function in the sata_dwc_460ex driver
and libata-sff code (Colin and Sergey)
- Minor cleanup of the pata_ep93xx driver platform code (from
Minghao)
- Remove the unnecessary linux/msi.h include from the ahci driver
(Thomas)
- Changes to libata enum constants definitions to avoid warnings with
gcc-13 (Arnd)"
* tag 'ata-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (24 commits)
ata: ahci: fix enum constants for gcc-13
ata: libata: fix commands incorrectly not getting retried during NCQ error
ata: ahci: Remove linux/msi.h include
ata: sata_dwc_460ex: Check !irq instead of irq == NO_IRQ
ata: pata_ep93xx: use devm_platform_get_and_ioremap_resource()
ata: libata-sff: kill unused ata_sff_busy_sleep()
ata: sata_dwc_460ex: remove variable num_processed
ata: remove palmchip pata_bk3710 driver
ata: remove unused helper ata_id_flush_ext_enabled()
ata: remove unused helper ata_id_flush_enabled()
ata: remove unused helper ata_id_lba48_enabled()
ata: libata-core: do not retry reading the log on timeout
scsi: libsas: make use of ata_port_is_frozen() helper
ata: make use of ata_port_is_frozen() helper
ata: add ata_port_is_frozen() helper
ata: pata_ftide010: Remove build dependency on OF
ata: sata_gemini: Remove dependency on OF for compile tests
ata: pata_mpc52xx: Replace NO_IRQ with 0
ata: libahci: read correct status and error field for NCQ commands
ata: libata: fetch sense data for ATA devices supporting sense reporting
...
|
|
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
Joshi)
- Refactor PCIe probing and reset (Christoph Hellwig)
- Various fabrics authentication fixes and improvements (Sagi
Grimberg)
- Avoid fallback to sequential scan due to transient issues (Uday
Shankar)
- Implement support for the DEAC bit in Write Zeroes (Christoph
Hellwig)
- Allow overriding the IEEE OUI and firmware revision in configfs
for nvmet (Aleksandr Miloserdov)
- Force reconnect when number of queue changes in nvmet (Daniel
Wagner)
- Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
Grimberg, Christoph Hellwig, Christophe JAILLET)
- Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
- Use the common tagset helpers in nvme-pci driver (Christoph
Hellwig)
- Cleanup the nvme-pci removal path (Christoph Hellwig)
- Use kstrtobool() instead of strtobool (Christophe JAILLET)
- Allow unprivileged passthrough of Identify Controller (Joel
Granados)
- Support io stats on the mpath device (Sagi Grimberg)
- Minor nvmet cleanup (Sagi Grimberg)
- MD pull requests via Song:
- Code cleanups (Christoph)
- Various fixes
- Floppy pull request from Denis:
- Fix a memory leak in the init error path (Yuan)
- Series fixing some batch wakeup issues with sbitmap (Gabriel)
- Removal of the pktcdvd driver that was deprecated more than 5 years
ago, and subsequent removal of the devnode callback in struct
block_device_operations as no users are now left (Greg)
- Fix for partition read on an exclusively opened bdev (Jan)
- Series of elevator API cleanups (Jinlong, Christoph)
- Series of fixes and cleanups for blk-iocost (Kemeng)
- Series of fixes and cleanups for blk-throttle (Kemeng)
- Series adding concurrent support for sync queues in BFQ (Yu)
- Series bringing drbd a bit closer to the out-of-tree maintained
version (Christian, Joel, Lars, Philipp)
- Misc drbd fixes (Wang)
- blk-wbt fixes and tweaks for enable/disable (Yu)
- Fixes for mq-deadline for zoned devices (Damien)
- Add support for read-only and offline zones for null_blk
(Shin'ichiro)
- Series fixing the delayed holder tracking, as used by DM (Yu,
Christoph)
- Series enabling bio alloc caching for IRQ based IO (Pavel)
- Series enabling userspace peer-to-peer DMA (Logan)
- BFQ waker fixes (Khazhismel)
- Series fixing elevator refcount issues (Christoph, Jinlong)
- Series cleaning up references around queue destruction (Christoph)
- Series doing quiesce by tagset, enabling cleanups in drivers
(Christoph, Chao)
- Series untangling the queue kobject and queue references (Christoph)
- Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)
* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
blktrace: Fix output non-blktrace event when blk_classic option enabled
block: sed-opal: Don't include <linux/kernel.h>
sed-opal: allow using IOC_OPAL_SAVE for locking too
blk-cgroup: Fix typo in comment
block: remove bio_set_op_attrs
nvmet: don't open-code NVME_NS_ATTR_RO enumeration
nvme-pci: use the tagset alloc/free helpers
nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
nvme: consolidate setting the tagset flags
nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
block: bio_copy_data_iter
nvme-pci: split out a nvme_pci_ctrl_is_dead helper
nvme-pci: return early on ctrl state mismatch in nvme_reset_work
nvme-pci: rename nvme_disable_io_queues
nvme-pci: cleanup nvme_suspend_queue
nvme-pci: remove nvme_pci_disable
nvme-pci: remove nvme_disable_admin_queue
nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
nvme: use nvme_wait_ready in nvme_shutdown_ctrl
...
|
|
Pull io_uring updates part two from Jens Axboe:
- Misc fixes (me, Lin)
- Series from Pavel extending the single task exclusive ring mode,
yielding nice improvements for the common case of having a single
ring per thread (Pavel)
- Cleanup for MSG_RING, removing our IOPOLL hack (Pavel)
- Further poll cleanups and fixes (Pavel)
- Misc cleanups and fixes (Pavel)
* tag 'for-6.2/io_uring-next-2022-12-08' of git://git.kernel.dk/linux: (22 commits)
io_uring/msg_ring: flag target ring as having task_work, if needed
io_uring: skip spinlocking for ->task_complete
io_uring: do msg_ring in target task via tw
io_uring: extract a io_msg_install_complete helper
io_uring: get rid of double locking
io_uring: never run tw and fallback in parallel
io_uring: use tw for putting rsrc
io_uring: force multishot CQEs into task context
io_uring: complete all requests in task context
io_uring: don't check overflow flush failures
io_uring: skip overflow CQE posting for dying ring
io_uring: improve io_double_lock_ctx fail handling
io_uring: dont remove file from msg_ring reqs
io_uring: reshuffle issue_flags
io_uring: don't reinstall quiesce node for each tw
io_uring: improve rsrc quiesce refs checks
io_uring: don't raw spin unlock to match cq_lock
io_uring: combine poll tw handlers
io_uring: improve poll warning handling
io_uring: remove ctx variable in io_poll_check_events
...
|
|
Pull io_uring updates from Jens Axboe:
- Always ensure proper ordering in case of CQ ring overflow, which then
means we can remove some work-arounds for that (Dylan)
- Support completion batching for multishot, greatly increasing the
efficiency for those (Dylan)
- Flag epoll/eventfd wakeups done from io_uring, so that we can easily
tell if we're recursing into io_uring again.
Previously, this would have resulted in repeated multishot
notifications if we had a dependency there. That could happen if an
eventfd was registered as the ring eventfd, and we multishot polled
for events on it. Or if an io_uring fd was added to epoll, and
io_uring had a multishot request for the epoll fd.
Test cases here:
https://git.kernel.dk/cgit/liburing/commit/?id=919755a7d0096fda08fb6d65ac54ad8d0fe027cd
Previously these got terminated when the CQ ring eventually
overflowed, now it's handled gracefully (me).
- Tightening of the IOPOLL based completions (Pavel)
- Optimizations of the networking zero-copy paths (Pavel)
- Various tweaks and fixes (Dylan, Pavel)
* tag 'for-6.2/io_uring-2022-12-08' of git://git.kernel.dk/linux: (41 commits)
io_uring: keep unlock_post inlined in hot path
io_uring: don't use complete_post in kbuf
io_uring: spelling fix
io_uring: remove io_req_complete_post_tw
io_uring: allow multishot polled reqs to defer completion
io_uring: remove overflow param from io_post_aux_cqe
io_uring: add lockdep assertion in io_fill_cqe_aux
io_uring: make io_fill_cqe_aux static
io_uring: add io_aux_cqe which allows deferred completion
io_uring: allow defer completion for aux posted cqes
io_uring: defer all io_req_complete_failed
io_uring: always lock in io_apoll_task_func
io_uring: remove iopoll spinlock
io_uring: iopoll protect complete_post
io_uring: inline __io_req_complete_put()
io_uring: remove io_req_tw_post_queue
io_uring: use io_req_task_complete() in timeout
io_uring: hold locks for io_req_complete_failed
io_uring: add completion locking for iopoll
io_uring: kill io_cqring_ev_posted() and __io_cq_unlock_post()
...
|
