Age | Commit message (Collapse) | Author | Files | Lines |
|
* arm64/for-next/perf:
perf/imx_ddr: Add system PMU identifier for userspace
bindings: perf: imx-ddr: add compatible string
arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
arm64: Enable perf events based hard lockup detector
perf/imx_ddr: Add stop event counters support for i.MX8MP
perf/smmuv3: Support sysfs identifier file
drivers/perf: hisi: Add identifier sysfs file
perf: remove duplicate check on fwnode
driver/perf: Add PMU driver for the ARM DMC-620 memory controller
|
|
'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-next/signal-tag-bits' and 'for-next/cmdline-extended' into for-next/core
* for-next/kvm-build-fix:
: Fix KVM build issues with 64K pages
KVM: arm64: Fix build error in user_mem_abort()
* for-next/va-refactor:
: VA layout changes
arm64: mm: don't assume struct page is always 64 bytes
Documentation/arm64: fix RST layout of memory.rst
arm64: mm: tidy up top of kernel VA space
arm64: mm: make vmemmap region a projection of the linear region
arm64: mm: extend linear region for 52-bit VA configurations
* for-next/lto:
: Upgrade READ_ONCE() to RCpc acquire on arm64 with LTO
arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y
arm64: alternatives: Remove READ_ONCE() usage during patch operation
arm64: cpufeatures: Add capability for LDAPR instruction
arm64: alternatives: Split up alternative.h
arm64: uaccess: move uao_* alternatives to asm-uaccess.h
* for-next/mem-hotplug:
: Memory hotplug improvements
arm64/mm/hotplug: Ensure early memory sections are all online
arm64/mm/hotplug: Enable MEM_OFFLINE event handling
arm64/mm/hotplug: Register boot memory hot remove notifier earlier
arm64: mm: account for hotplug memory when randomizing the linear region
* for-next/cppc-ffh:
: Add CPPC FFH support using arm64 AMU counters
arm64: abort counter_read_on_cpu() when irqs_disabled()
arm64: implement CPPC FFH support using AMUs
arm64: split counter validation function
arm64: wrap and generalise counter read functions
* for-next/pad-image-header:
: Pad Image header to 64KB and unmap it
arm64: head: tidy up the Image header definition
arm64/head: avoid symbol names pointing into first 64 KB of kernel image
arm64: omit [_text, _stext) from permanent kernel mapping
* for-next/zone-dma-default-32-bit:
: Default to 32-bit wide ZONE_DMA (previously reduced to 1GB for RPi4)
of: unittest: Fix build on architectures without CONFIG_OF_ADDRESS
mm: Remove examples from enum zone_type comment
arm64: mm: Set ZONE_DMA size based on early IORT scan
arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges
of: unittest: Add test for of_dma_get_max_cpu_address()
of/address: Introduce of_dma_get_max_cpu_address()
arm64: mm: Move zone_dma_bits initialization into zone_sizes_init()
arm64: mm: Move reserve_crashkernel() into mem_init()
arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required
arm64: Ignore any DMA offsets in the max_zone_phys() calculation
* for-next/signal-tag-bits:
: Expose the FAR_EL1 tag bits in siginfo
arm64: expose FAR_EL1 tag bits in siginfo
signal: define the SA_EXPOSE_TAGBITS bit in sa_flags
signal: define the SA_UNSUPPORTED bit in sa_flags
arch: provide better documentation for the arch-specific SA_* flags
signal: clear non-uapi flag bits when passing/returning sa_flags
arch: move SA_* definitions to generic headers
parisc: start using signal-defs.h
parisc: Drop parisc special case for __sighandler_t
* for-next/cmdline-extended:
: Add support for CONFIG_CMDLINE_EXTENDED
arm64: Extend the kernel command line from the bootloader
arm64: kaslr: Refactor early init command line parsing
|
|
With the recent feature added to enable perf events to use pseudo NMIs
as interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.
One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). So we need to re-initialize lockup detection once
PMU has been initialized.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/1602060704-10921-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Architectures that support address tagging, such as arm64, may want to
expose fault address tag bits to the signal handler to help diagnose
memory errors. However, these bits have not been previously set,
and their presence may confuse unaware user applications. Therefore,
introduce a SA_EXPOSE_TAGBITS flag bit in sa_flags that a signal
handler may use to explicitly request that the bits are set.
The generic signal handler APIs expect to receive tagged addresses.
Architectures may specify how to untag addresses in the case where
SA_EXPOSE_TAGBITS is clear by defining the arch_untagged_si_addr
function.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://linux-review.googlesource.com/id/I16dd0ed2081f091fce97be0190cb8caa874c26cb
Link: https://lkml.kernel.org/r/13cf24d00ebdd8e1f55caf1821c7c29d54100191.1605904350.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Previously we were not clearing non-uapi flag bits in
sigaction.sa_flags when storing the userspace-provided sa_flags or
when returning them via oldact. Start doing so.
This allows userspace to detect missing support for flag bits and
allows the kernel to use non-uapi bits internally, as we are already
doing in arch/x86 for two flag bits. Now that this change is in
place, we no longer need the code in arch/x86 that was hiding these
bits from userspace, so remove it.
This is technically a userspace-visible behavior change for sigaction, as
the unknown bits returned via oldact.sa_flags are no longer set. However,
we are free to define the behavior for unknown bits exactly because
their behavior is currently undefined, so for now we can define the
meaning of each of them to be "clear the bit in oldact.sa_flags unless
the bit becomes known in the future". Furthermore, this behavior is
consistent with OpenBSD [1], illumos [2] and XNU [3] (FreeBSD [4] and
NetBSD [5] fail the syscall if unknown bits are set). So there is some
precedent for this behavior in other kernels, and in particular in XNU,
which is probably the most popular kernel among those that I looked at,
which means that this change is less likely to be a compatibility issue.
Link: [1] https://github.com/openbsd/src/blob/f634a6a4b5bf832e9c1de77f7894ae2625e74484/sys/kern/kern_sig.c#L278
Link: [2] https://github.com/illumos/illumos-gate/blob/76f19f5fdc974fe5be5c82a556e43a4df93f1de1/usr/src/uts/common/syscall/sigaction.c#L86
Link: [3] https://github.com/apple/darwin-xnu/blob/a449c6a3b8014d9406c2ddbdc81795da24aa7443/bsd/kern/kern_sig.c#L480
Link: [4] https://github.com/freebsd/freebsd/blob/eded70c37057857c6e23fae51f86b8f8f43cd2d0/sys/kern/kern_sig.c#L699
Link: [5] https://github.com/NetBSD/src/blob/3365779becdcedfca206091a645a0e8e22b2946e/sys/kern/sys_sig.c#L473
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://linux-review.googlesource.com/id/I35aab6f5be932505d90f3b3450c083b4db1eca86
Link: https://lkml.kernel.org/r/878dbcb5f47bc9b11881c81f745c0bef5c23f97f.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
We can't really list every setup in common code. On top of that they are
unlikely to stay true for long as things change in the arch trees
independently of this comment.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20201119175400.9995-8-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We recently introduced a 1 GB sized ZONE_DMA to cater for platforms
incorporating masters that can address less than 32 bits of DMA, in
particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has
peripherals that can only address up to 1 GB (and its PCIe host
bridge can only access the bottom 3 GB)
Instructing the DMA layer about these limitations is straight-forward,
even though we had to fix some issues regarding memory limits set in
the IORT for named components, and regarding the handling of ACPI _DMA
methods. However, the DMA layer also needs to be able to allocate
memory that is guaranteed to meet those DMA constraints, for bounce
buffering as well as allocating the backing for consistent mappings.
This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately,
it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes
problems with kdump, and potentially in other places where allocations
cannot cross zone boundaries. Therefore, we should avoid having two
separate DMA zones when possible.
So let's do an early scan of the IORT, and only create the ZONE_DMA
if we encounter any devices that need it. This puts the burden on
the firmware to describe such limitations in the IORT, which may be
redundant (and less precise) if _DMA methods are also being provided.
However, it should be noted that this situation is highly unusual for
arm64 ACPI machines. Also, the DMA subsystem still gives precedence to
the _DMA method if implemented, and so we will not lose the ability to
perform streaming DMA outside the ZONE_DMA if the _DMA method permits
it.
[nsaenz: unified implementation with DT's counterpart]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Introduce of_dma_get_max_cpu_address(), which provides the highest CPU
physical address addressable by all DMA masters in the system. It's
specially useful for setting memory zones sizes at early boot time.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201119175400.9995-4-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pull xfs fixes from Darrick Wong:
- Fix an uninitialized struct problem
- Fix an iomap problem zeroing unwritten EOF blocks
- Fix some clumsy error handling when writeback fails on filesystems
with blocksize < pagesize
- Fix a retry loop not resetting loop variables properly
- Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel
actually does permit that combination
- Fix excessive page cache flushing when unsharing part of a file
* tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: only flush the unshared range in xfs_reflink_unshare
xfs: fix scrub flagging rtinherit even if there is no rt device
xfs: fix missing CoW blocks writeback conversion retry
iomap: clean up writeback state logic on writepage error
iomap: support partial page discard on writeback block mapping failure
xfs: flush new eof page on truncate to avoid post-eof corruption
xfs: set xefi_discard when creating a deferred agfl free log intent item
|
|
Merge procfs splice read fixes from Christoph Hellwig:
"Greg reported a problem due to the fact that Android tests use procfs
files to test splice, which stopped working with the changes for
set_fs() removal.
This series adds read_iter support for seq_file, and uses those for
various proc files using seq_file to restore splice read support"
[ Side note: Christoph initially had a scripted "move everything over"
patch, which looks fine, but I personally would prefer us to actively
discourage splice() on random files. So this does just the minimal
basic core set of proc file op conversions.
For completeness, and in case people care, that script was
sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g'
but I'll wait and see if somebody has a strong argument for using
splice on random small /proc files before I'd run it on the whole
kernel. - Linus ]
* emailed patches from Christoph Hellwig <hch@lst.de>:
proc "seq files": switch to ->read_iter
proc "single files": switch to ->read_iter
proc/stat: switch to ->read_iter
proc/cpuinfo: switch to ->read_iter
proc: wire up generic_file_splice_read for iter ops
seq_file: add seq_read_iter
|
|
Pull io_uring fixes from Jens Axboe:
"A set of fixes for io_uring:
- SQPOLL cancelation fixes
- Two fixes for the io_identity COW
- Cancelation overflow fix (Pavel)
- Drain request cancelation fix (Pavel)
- Link timeout race fix (Pavel)"
* tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
io_uring: fix link lookup racing with link timeout
io_uring: use correct pointer for io_uring_show_cred()
io_uring: don't forget to task-cancel drained reqs
io_uring: fix overflowed cancel w/ linked ->files
io_uring: drop req/tctx io_identity separately
io_uring: ensure consistent view of original task ->mm from SQPOLL
io_uring: properly handle SQPOLL request cancelations
io-wq: cancel request if it's asking for files and we don't have them
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc3, including fixes from wireless, can, and
netfilter subtrees.
Current merge window - bugs in new features:
- can: isotp: isotp_rcv_cf(): enable RX timeout handling in
listen-only mode
Previous releases - regressions:
- mac80211:
- don't require VHT elements for HE on 2.4 GHz
- fix regression where EAPOL frames were sent in plaintext
- netfilter:
- ipset: Update byte and packet counters regardless of whether
they match
- ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
inner packet has IP_DF (don't fragment) set in its header (when
TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)
- net: fec: fix MDIO probing for some FEC hardware blocks
- ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
support
- sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
platforms, sparse-related fix used the wrong integer size
Previous releases - always broken:
- netfilter: use actual socket sk rather than skb sk when routing
harder
- r8169: work around short packet hw bug on RTL8125 by padding frames
- net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
advertisement, the hardware does not support it
- chelsio/chtls: fix always leaking ctrl_skb and another leak caused
by a race condition
- fix drivers incorrectly writing into skbs on TX:
- cadence: force nonlinear buffers to be cloned
- gianfar: Account for Tx PTP timestamp in the skb headroom
- gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP
- can: flexcan:
- remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
- add ECC initialization for VF610 and LX2160A
- flexcan_remove(): disable wakeup completely
- can: fix packet echo functionality:
- peak_canfd: fix echo management when loopback is on
- make sure skbs are not freed in IRQ context in case they need to
be dropped
- always clone the skbs to make sure they have a reference on the
socket, and prevent it from disappearing
- fix real payload length return value for RTR frames
- can: j1939: return failure on bind if netdev is down, rather than
waiting indefinitely
Misc:
- IPv6: reply ICMP error if the first fragment don't include all
headers to improve compliance with RFC 8200"
* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
ionic: check port ptr before use
r8169: work around short packet hw bug on RTL8125
net: openvswitch: silence suspicious RCU usage warning
chelsio/chtls: fix always leaking ctrl_skb
chelsio/chtls: fix memory leaks caused by a race
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
...
|
|
iov_iter based variant for reading a seq_file. seq_read is
reimplemented on top of the iter variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the device links support in runtime PM, correct mistakes in
the cpuidle documentation, fix the handling of policy limits changes
in the schedutil cpufreq governor, fix assorted issues in the OPP
(operating performance points) framework and make one janitorial
change.
Specifics:
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy limits
updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal of
OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping driver
(Tom Rix)"
* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Resume the device earlier in __device_release_driver()
PM: runtime: Drop pm_runtime_clean_up_links()
PM: runtime: Drop runtime PM references to supplier on link removal
powercap/intel_rapl: remove unneeded semicolon
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
|
|
Track if a given task io_uring context contains SQPOLL instances, so we
can iterate those for cancelation (and request counts). This ensures that
we properly wait on SQPOLL contexts, and find everything that needs
canceling.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
iomap writeback mapping failure only calls into ->discard_page() if
the current page has not been added to the ioend. Accordingly, the
XFS callback assumes a full page discard and invalidation. This is
problematic for sub-page block size filesystems where some portion
of a page might have been mapped successfully before a failure to
map a delalloc block occurs. ->discard_page() is not called in that
error scenario and the bio is explicitly failed by iomap via the
error return from ->prepare_ioend(). As a result, the filesystem
leaks delalloc blocks and corrupts the filesystem block counters.
Since XFS is the only user of ->discard_page(), tweak the semantics
to invoke the callback unconditionally on mapping errors and provide
the file offset that failed to map. Update xfs_discard_page() to
discard the corresponding portion of the file and pass the range
along to iomap_invalidatepage(). The latter already properly handles
both full and sub-page scenarios by not changing any iomap or page
state on sub-page invalidations.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
All user space generated SKBs are owned by a socket (unless injected into the
key via AF_PACKET). If a socket is closed, all associated skbs will be cleaned
up.
This leads to a problem when a CAN driver calls can_put_echo_skb() on a
unshared SKB. If the socket is closed prior to the TX complete handler,
can_get_echo_skb() and the subsequent delivering of the echo SKB to all
registered callbacks, a SKB with a refcount of 0 is delivered.
To avoid the problem, in can_get_echo_skb() the original SKB is now always
cloned, regardless of shared SKB or not. If the process exists it can now
safely discard its SKBs, without disturbing the delivery of the echo SKB.
The problem shows up in the j1939 stack, when it clones the incoming skb, which
detects the already 0 refcount.
We can easily reproduce this with following example:
testj1939 -B -r can0: &
cansend can0 1823ff40#0123
WARNING: CPU: 0 PID: 293 at lib/refcount.c:25 refcount_warn_saturate+0x108/0x174
refcount_t: addition on 0; use-after-free.
Modules linked in: coda_vpu imx_vdoa videobuf2_vmalloc dw_hdmi_ahb_audio vcan
CPU: 0 PID: 293 Comm: cansend Not tainted 5.5.0-rc6-00376-g9e20dcb7040d #1
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<c010f570>] (dump_backtrace) from [<c010f90c>] (show_stack+0x20/0x24)
[<c010f8ec>] (show_stack) from [<c0c3e1a4>] (dump_stack+0x8c/0xa0)
[<c0c3e118>] (dump_stack) from [<c0127fec>] (__warn+0xe0/0x108)
[<c0127f0c>] (__warn) from [<c01283c8>] (warn_slowpath_fmt+0xa8/0xcc)
[<c0128324>] (warn_slowpath_fmt) from [<c0539c0c>] (refcount_warn_saturate+0x108/0x174)
[<c0539b04>] (refcount_warn_saturate) from [<c0ad2cac>] (j1939_can_recv+0x20c/0x210)
[<c0ad2aa0>] (j1939_can_recv) from [<c0ac9dc8>] (can_rcv_filter+0xb4/0x268)
[<c0ac9d14>] (can_rcv_filter) from [<c0aca2cc>] (can_receive+0xb0/0xe4)
[<c0aca21c>] (can_receive) from [<c0aca348>] (can_rcv+0x48/0x98)
[<c0aca300>] (can_rcv) from [<c09b1fdc>] (__netif_receive_skb_one_core+0x64/0x88)
[<c09b1f78>] (__netif_receive_skb_one_core) from [<c09b2070>] (__netif_receive_skb+0x38/0x94)
[<c09b2038>] (__netif_receive_skb) from [<c09b2130>] (netif_receive_skb_internal+0x64/0xf8)
[<c09b20cc>] (netif_receive_skb_internal) from [<c09b21f8>] (netif_receive_skb+0x34/0x19c)
[<c09b21c4>] (netif_receive_skb) from [<c0791278>] (can_rx_offload_napi_poll+0x58/0xb4)
Fixes: 0ae89beb283a ("can: add destructor for self generated skbs")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: http://lore.kernel.org/r/20200124132656.22156-1-o.rempel@pengutronix.de
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
|
|
The purpose of io_remap_pfn_range() is to map IO memory, such as a
memory mapped IO exposed through a PCI BAR. IO devices do not
understand encryption, so this memory must always be decrypted.
Automatically call pgprot_decrypted() as part of the generic
implementation.
This fixes a bug where enabling AMD SME causes subsystems, such as RDMA,
using io_remap_pfn_range() to expose BAR pages to user space to fail.
The CPU will encrypt access to those BAR pages instead of passing
unencrypted IO directly to the device.
Places not mapping IO should use remap_pfn_range().
Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Dave Young" <dyoung@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Toshimitsu Kani <toshi.kani@hpe.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/0-v1-025d64bdf6c4+e-amd_sme_fix_jgg@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit d12544fb2aa9 ("PM: runtime: Remove link state checks in
rpm_get/put_supplier()") nothing prevents the consumer device's
runtime PM from acquiring additional references to the supplier
device after pm_runtime_clean_up_links() has run (or even while it
is running), so calling this function from __device_release_driver()
may be pointless (or even harmful).
Moreover, it ignores stateless device links, so the runtime PM
handling of managed and stateless device links is inconsistent
because of it, so better get rid of it entirely.
Fixes: d12544fb2aa9 ("PM: runtime: Remove link state checks in rpm_get/put_supplier()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While removing a device link, drop the supplier device's runtime PM
usage counter as many times as needed to drop all of the runtime PM
references to it from the consumer in addition to dropping the
consumer's link count.
Fixes: baa8809f6097 ("PM / runtime: Optimize the use of device links")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A few fixes for timers/timekeeping:
- Prevent undefined behaviour in the timespec64_to_ns() conversion
which is used for converting user supplied time input to
nanoseconds. It lacked overflow protection.
- Mark sched_clock_read_begin/retry() to prevent recursion in the
tracer
- Remove unused debug functions in the hrtimer and timerlist code"
* tag 'timers-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Prevent undefined behaviour in timespec64_to_ns()
timers: Remove unused inline funtion debug_timer_free()
hrtimer: Remove unused inline function debug_hrtimer_free()
time/sched_clock: Mark sched_clock_read_begin/retry() as notrace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes/removals from Greg KH:
"Here's some small fixes for 5.10-rc2 and a big driver removal.
The fixes are for some reported issues in the interconnect and
coresight drivers, nothing major.
The "big" driver removal is the MIC drivers have been asked to be
removed as the hardware never shipped and Intel no longer wants to
maintain something that no one can use. This is welcomed by many as
the DMA usage of these drivers was "interesting" and the security
people were starting to question some issues that were starting to be
found in the codebase.
Note, one of the subsystems for this driver, the "VOP" code, will
probably come back in future kernel versions as it was looking to
potentially solve some PCIe virtualization issues that a number of
other vendors were wanting to solve. But as-is, this codebase didn't
work for anyone else so no actual functionality is being removed.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: cti: Initialize dynamic sysfs attributes
coresight: Fix uninitialised pointer bug in etm_setup_aux()
coresight: add module license
misc: mic: remove the MIC drivers
interconnect: qcom: use icc_sync state for sm8[12]50
interconnect: qcom: Ensure that the floor bandwidth value is enforced
interconnect: qcom: sc7180: Init BCMs before creating the nodes
interconnect: qcom: sdm845: Init BCMs before creating the nodes
interconnect: Aggregate before setting initial bandwidth
interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and documentation fixes from Greg KH:
"Here is one tiny debugfs change to fix up an API where the last user
was successfully fixed up in 5.10-rc1 (so it couldn't be merged
earlier), and a much larger Documentation/ABI/ update to the files so
they can be automatically parsed by our tools.
The Documentation/ABI/ updates are just formatting issues, small ones
to bring the files into parsable format, and have been acked by
numerous subsystem maintainers and the documentation maintainer. I
figured it was good to get this into 5.10-rc2 to help wih the merge
issues that would arise if these were to stick in linux-next until
5.11-rc1.
The debugfs change has been in linux-next for a long time, and the
Documentation updates only for the last linux-next release"
* tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (40 commits)
scripts: get_abi.pl: assume ReST format by default
docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication
docs: ABI: sysfs-class-backlight: unify ABI documentation
docs: ABI: sysfs-c2port: remove a duplicated entry
docs: ABI: sysfs-class-power: unify duplicated properties
docs: ABI: unify /sys/class/leds/<led>/brightness documentation
docs: ABI: stable: remove a duplicated documentation
docs: ABI: change read/write attributes
docs: ABI: cleanup several ABI documents
docs: ABI: sysfs-bus-nvdimm: use the right format for ABI
docs: ABI: vdso: use the right format for ABI
docs: ABI: fix syntax to be parsed using ReST notation
docs: ABI: convert testing/configfs-acpi to ReST
docs: Kconfig/Makefile: add a check for broken ABI files
docs: abi-testing.rst: enable --rst-sources when building docs
docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
docs: ABI: create a 2-depth index for ABI
docs: ABI: make it parse ABI/stable as ReST-compatible files
docs: ABI: sysfs-uevent: make it compatible with ReST output
docs: ABI: testing: make the files compatible with ReST output
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are a number of small bugfixes for reported issues in some USB
drivers. They include:
- typec bugfixes
- xhci bugfixes and lockdep warning fixes
- cdc-acm driver regression fix
- kernel doc fixes
- cdns3 driver bugfixes for a bunch of reported issues
- other tiny USB driver fixes
All have been in linux-next with no reported issues"
* tag 'usb-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdns3: gadget: own the lock wrongly at the suspend routine
usb: cdns3: Fix on-chip memory overflow issue
usb: cdns3: gadget: suspicious implicit sign extension
xhci: Don't create stream debugfs files with spinlock held.
usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC
xhci: Fix sizeof() mismatch
usb: typec: stusb160x: fix signedness comparison issue with enum variables
usb: typec: add missing MODULE_DEVICE_TABLE() to stusb160x
USB: apple-mfi-fastcharge: don't probe unhandled devices
usbcore: Check both id_table and match() when both available
usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe()
usb: typec: stusb160x: fix an IS_ERR() vs NULL check in probe
usb: typec: tcpm: reset hard_reset_count for any disconnect
usb: cdc-acm: fix cooldown mechanism
usb: host: fsl-mph-dr-of: check return of dma_set_mask()
usb: fix kernel-doc markups
usb: typec: stusb160x: fix some signedness bugs
usb: cdns3: Variable 'length' set but not used
|
|
Pull vhost fixes from Michael Tsirkin:
"Fixes all over the place.
A new UAPI is borderline: can also be considered a new feature but
also seems to be the only way we could come up with to fix addressing
for userspace - and it seems important to switch to it now before
userspace making assumptions about addressing ability of devices is
set in stone"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpasim: allow to assign a MAC address
vdpasim: fix MAC address configuration
vdpa: handle irq bypass register failure case
vdpa_sim: Fix DMA mask
Revert "vhost-vdpa: fix page pinning leakage in error path"
vdpa/mlx5: Fix error return in map_direct_mr()
vhost_vdpa: Return -EFAULT if copy_from_user() fails
vdpa_sim: implement get_iova_range()
vhost: vdpa: report iova range
vdpa: introduce config op to get valid iova range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull more flexible-array member conversions from Gustavo A. R. Silva:
"Replace zero-length arrays with flexible-array members"
* tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
printk: ringbuffer: Replace zero-length array with flexible-array member
net/smc: Replace zero-length array with flexible-array member
net/mlx5: Replace zero-length array with flexible-array member
mei: hw: Replace zero-length array with flexible-array member
gve: Replace zero-length array with flexible-array member
Bluetooth: btintel: Replace zero-length array with flexible-array member
scsi: target: tcmu: Replace zero-length array with flexible-array member
ima: Replace zero-length array with flexible-array member
enetc: Replace zero-length array with flexible-array member
fs: Replace zero-length array with flexible-array member
Bluetooth: Replace zero-length array with flexible-array member
params: Replace zero-length array with flexible-array member
tracepoint: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member
mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member
dmaengine: ti-cppi5: Replace zero-length array with flexible-array member
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The diffstat is a bit spread out thanks to an invasive CPU erratum
workaround which missed the merge window and also a bunch of fixes to
the recently added MTE selftests.
- Fixes to MTE kselftests
- Fix return code from KVM Spectre-v2 hypercall
- Build fixes for ld.lld and Clang's infamous integrated assembler
- Ensure RCU is up and running before we use printk()
- Workaround for Cortex-A77 erratum 1508412
- Fix linker warnings from unexpected ELF sections
- Ensure PE/COFF sections are 64k aligned"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Change .weak to SYM_FUNC_START_WEAK_PI for arch/arm64/lib/mem*.S
arm64/smp: Move rcu_cpu_starting() earlier
arm64: Add workaround for Arm Cortex-A77 erratum 1508412
arm64: Add part number for Arm Cortex-A77
arm64: mte: Document that user PSTATE.TCO is ignored by kernel uaccess
module: use hidden visibility for weak symbol references
arm64: efi: increase EFI PE/COFF header padding to 64 KB
arm64: vmlinux.lds: account for spurious empty .igot.plt sections
kselftest/arm64: Fix check_user_mem test
kselftest/arm64: Fix check_ksm_options test
kselftest/arm64: Fix check_mmap_options test
kselftest/arm64: Fix check_child_memory test
kselftest/arm64: Fix check_tags_inclusion test
kselftest/arm64: Fix check_buffer_fill test
arm64: avoid -Woverride-init warning
KVM: arm64: ARM_SMCCC_ARCH_WORKAROUND_1 doesn't return SMCCC_RET_NOT_REQUIRED
arm64: vdso32: Allow ld.lld to properly link the VDSO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a few issues related to running intel_pstate in the passive
mode with HWP enabled, correct the handling of the max_cstate module
parameter in intel_idle and make a few janitorial changes.
Specifics:
- Modify Kconfig to prevent configuring either the "conservative" or
the "ondemand" governor as the default cpufreq governor if
intel_pstate is selected, in which case "schedutil" is the default
choice for the default governor setting (Rafael Wysocki).
- Modify the cpufreq core, intel_pstate and the schedutil governor to
avoid missing updates of the HWP max limit when intel_pstate
operates in the passive mode with HWP enabled (Rafael Wysocki).
- Fix max_cstate module parameter handling in intel_idle for
processor models with C-state tables coming from ACPI (Chen Yu).
- Clean up assorted pieces of power management code (Jackie Zamow,
Tom Rix, Zhang Qilong)"
* tag 'pm-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: schedutil: Always call driver if CPUFREQ_NEED_UPDATE_LIMITS is set
cpufreq: Introduce cpufreq_driver_test_flags()
cpufreq: speedstep: remove unneeded semicolon
PM: sleep: fix typo in kernel/power/process.c
intel_idle: Fix max_cstate for processor models without C-state tables
cpufreq: intel_pstate: Avoid missing HWP max updates in passive mode
cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS driver flag
cpufreq: Avoid configuring old governors as default with intel_pstate
cpufreq: e_powersaver: remove unreachable break
|
|
If userspace does not include the trailing end of batch message, then
nfnetlink aborts the transaction. This allows to check that ruleset
updates trigger no errors.
After this patch, invoking this command from the prerouting chain:
# nft -c add rule x y fib saddr . oif type local
fails since oif is not supported there.
This patch fixes the lack of rule validation from the abort/check path
to catch configuration errors such as the one above.
Fixes: a654de8fdc18 ("netfilter: nf_tables: fix chain dependency validation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If netfilter changes the packet mark when mangling, the packet is
rerouted using the route_me_harder set of functions. Prior to this
commit, there's one big difference between route_me_harder and the
ordinary initial routing functions, described in the comment above
__ip_queue_xmit():
/* Note: skb->sk can be different from sk, in case of tunnels */
int __ip_queue_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
That function goes on to correctly make use of sk->sk_bound_dev_if,
rather than skb->sk->sk_bound_dev_if. And indeed the comment is true: a
tunnel will receive a packet in ndo_start_xmit with an initial skb->sk.
It will make some transformations to that packet, and then it will send
the encapsulated packet out of a *new* socket. That new socket will
basically always have a different sk_bound_dev_if (otherwise there'd be
a routing loop). So for the purposes of routing the encapsulated packet,
the routing information as it pertains to the socket should come from
that socket's sk, rather than the packet's original skb->sk. For that
reason __ip_queue_xmit() and related functions all do the right thing.
One might argue that all tunnels should just call skb_orphan(skb) before
transmitting the encapsulated packet into the new socket. But tunnels do
*not* do this -- and this is wisely avoided in skb_scrub_packet() too --
because features like TSQ rely on skb->destructor() being called when
that buffer space is truely available again. Calling skb_orphan(skb) too
early would result in buffers filling up unnecessarily and accounting
info being all wrong. Instead, additional routing must take into account
the new sk, just as __ip_queue_xmit() notes.
So, this commit addresses the problem by fishing the correct sk out of
state->sk -- it's already set properly in the call to nf_hook() in
__ip_local_out(), which receives the sk as part of its normal
functionality. So we make sure to plumb state->sk through the various
route_me_harder functions, and then make correct use of it following the
example of __ip_queue_xmit().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
No one checks the return value of debugfs_create_devm_seqfile(), as it's
not needed, so make the return value void, so that no one tries to do so
in the future.
Link: https://lore.kernel.org/r/20201023131037.2500765-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fix from Gustavo A. R. Silva:
"This fixes a ton of fall-through warnings when building with Clang
12.0.0 and -Wimplicit-fallthrough"
* tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
include: jhash/signal: Fix fall-through warnings for Clang
|
|
Pull rdma fixes from Jason Gunthorpe:
"The good news is people are testing rc1 in the RDMA world - the bad
news is testing of the for-next area is not as good as I had hoped, as
we really should have caught at least the rdma_connect_locked() issue
before now.
Notable merge window regressions that didn't get caught/fixed in time
for rc1:
- Fix in kernel users of rxe, they were broken by the rapid fix to
undo the uABI breakage in rxe from another patch
- EFA userspace needs to read the GID table but was broken with the
new GID table logic
- Fix user triggerable deadlock in mlx5 using devlink reload
- Fix deadlock in several ULPs using rdma_connect from the CM handler
callbacks
- Memory leak in qedr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/qedr: Fix memory leak in iWARP CM
RDMA: Add rdma_connect_locked()
RDMA/uverbs: Fix false error in query gid IOCTL
RDMA/mlx5: Fix devlink deadlock on net namespace deletion
RDMA/rxe: Fix small problem in network_type patch
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, explicitly
add break statements instead of letting the code fall through to the
next case.
This patch adds four break statements that, together, fix almost 40,000
warnings when building Linux 5.10-rc1 with Clang 12.0.0 and this[1] change
reverted. Notice that in order to enable -Wimplicit-fallthrough for Clang,
such change[1] is meant to be reverted at some point. So, this patch helps
to move in that direction.
Something important to mention is that there is currently a discrepancy
between GCC and Clang when dealing with switch fall-through to empty case
statements or to cases that only contain a break/continue/return
statement[2][3][4].
Now that the -Wimplicit-fallthrough option has been globally enabled[5],
any compiler should really warn on missing either a fallthrough annotation
or any of the other case-terminating statements (break/continue/return/
goto) when falling through to the next case statement. Making exceptions
to this introduces variation in case handling which may continue to lead
to bugs, misunderstandings, and a general lack of robustness. The point
of enabling options like -Wimplicit-fallthrough is to prevent human error
and aid developers in spotting bugs before their code is even built/
submitted/committed, therefore eliminating classes of bugs. So, in order
to really accomplish this, we should, and can, move in the direction of
addressing any error-prone scenarios and get rid of the unintentional
fallthrough bug-class in the kernel, entirely, even if there is some minor
redundancy. Better to have explicit case-ending statements than continue to
have exceptions where one must guess as to the right result. The compiler
will eliminate any actual redundancy.
[1] commit e2079e93f562c ("kbuild: Do not enable -Wimplicit-fallthrough for clang for now")
[2] https://github.com/ClangBuiltLinux/linux/issues/636
[3] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91432
[4] https://godbolt.org/z/xgkvIh
[5] commit a035d552a93b ("Makefile: Globally enable fall-through warning")
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes for the new ext4 fast commit feature, plus a fix for the
'data=journal' bug fix.
Also use the generic casefolding support which has now landed in
fs/libfs.c for 5.10"
* tag 'ext4_for_linus_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: indicate that fast_commit is available via /sys/fs/ext4/feature/...
ext4: use generic casefolding support
ext4: do not use extent after put_bh
ext4: use IS_ERR() for error checking of path
ext4: fix mmap write protection for data=journal mode
jbd2: fix a kernel-doc markup
ext4: use s_mount_flags instead of s_mount_state for fast commit state
ext4: make num of fast commit blocks configurable
ext4: properly check for dirty state in ext4_inode_datasync_dirty()
ext4: fix double locking in ext4_fc_commit_dentry_updates()
|
|
Add a helper function to test the flags of the cpufreq driver in use
againt a given flags mask.
In particular, this will be needed to test the
CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag in the schedutil
governor.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.
Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.
Cc: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kernel-doc markup that documents _fc_replay_callback is
missing an asterisk, causing this warning:
../include/linux/jbd2.h:1271: warning: Function parameter or member 'j_fc_replay_callback' not described in 'journal_s'
When building the docs.
Fixes: 609f928af48f ("jbd2: fast commit recovery path")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6055927ada2015b55b413cdd2670533bdc9a8da2.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch reserves a field in the jbd2 superblock for number of fast
commit blocks. When this value is non-zero, Ext4 uses this field to
set the number of fast commit blocks.
Fixes: 6866d7b3f2bb ("ext4/jbd2: add fast commit initialization")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Changeset a435b9a14356 ("locking/refcount: Provide __refcount API to obtain the old value")
added a set of functions starting with __ that have a new
parameter, adding a series of new warnings:
$ ./scripts/kernel-doc -none include/linux/refcount.h
include/linux/refcount.h:169: warning: Function parameter or member 'oldp' not described in '__refcount_add_not_zero'
include/linux/refcount.h:208: warning: Function parameter or member 'oldp' not described in '__refcount_add'
include/linux/refcount.h:239: warning: Function parameter or member 'oldp' not described in '__refcount_inc_not_zero'
include/linux/refcount.h:261: warning: Function parameter or member 'oldp' not described in '__refcount_inc'
include/linux/refcount.h:291: warning: Function parameter or member 'oldp' not described in '__refcount_sub_and_test'
include/linux/refcount.h:327: warning: Function parameter or member 'oldp' not described in '__refcount_dec_and_test'
include/linux/refcount.h:347: warning: Function parameter or member 'oldp' not described in '__refcount_dec'
The issue is that the kernel-doc markups are now misplaced,
as they should be added just before the functions.
So, move the kernel-doc markups to the proper places,
in order to drop the warnings.
It should be noticed that git show produces a crappy output,
for this patch without "--patience" flag.
Fixes: a435b9a14356 ("locking/refcount: Provide __refcount API to obtain the old value")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/7985c31d1ace591bc5e1faa05c367f1295b78afd.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Sphinx 3 now checks for duplicated function declarations:
.../Documentation/networking/kapi:143: ../include/linux/phy.h:163: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
Declaration is 'unsigned int phy_supported_speeds (struct phy_device *phy, unsigned int *speeds, unsigned int size)'.
.../Documentation/networking/kapi:143: ../include/linux/phy.h:1034: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
Declaration is 'int phy_read_mmd (struct phy_device *phydev, int devad, u32 regnum)'.
.../Documentation/networking/kapi:143: ../include/linux/phy.h:1076: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
Declaration is 'int __phy_read_mmd (struct phy_device *phydev, int devad, u32 regnum)'.
.../Documentation/networking/kapi:143: ../include/linux/phy.h:1088: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
Declaration is 'int phy_write_mmd (struct phy_device *phydev, int devad, u32 regnum, u16 val)'.
.../Documentation/networking/kapi:143: ../include/linux/phy.h:1100: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
Declaration is 'int __phy_write_mmd (struct phy_device *phydev, int devad, u32 regnum, u16 val)'.
It turns that both the C and the H files have the same
kernel-doc markup for the same functions. Let's drop the
at the header file, keeping the one closer to the code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/75e9a357f9a716833d2094b04898754876365e68.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Changeset a8cf7f272b5a ("mm: add find_lock_head") renamed the
index parameter, but forgot to update the kernel-doc markups
accordingly.
Fixes: a8cf7f272b5a ("mm: add find_lock_head")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/dce89b296a4f5f9f8f798d5e76b6736c14a916ac.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
As reported by kernel-doc:
./include/linux/blk-mq.h:267: warning: Function parameter or member 'active_queues_shared_sbitmap' not described in 'blk_mq_tag_set'
There is now a new member for struct blk_mq_tag_set. Add a
description for it, based on the commit that introduced it.
Fixes: f1b49fdc1c64 ("blk-mq: Record active_queues_shared_sbitmap per tag_set for when using shared sbitmap")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/8e513153b83eefc05e358f51f2632b592c3f6772.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|